Home
Philips LED TV 40PFL7605H
Contents
1. Select folders that you want to montor for media fies The Player ibrary on this computer is AL updated automaticaly to reflect changes Select the folders to montor My personal folders 9 My folders and those of others that can access OK ce With Advanced Options open you can add specific folders to the list to share and click Add Add To Library Zl h Select folders Uus yeu want t monia for meds files The Plage library on ws compuler is ro uodabed nutomatcaly to select changes Select the folders to monitor My personal indem Minen nnd ier of eher thor oan acces Mercere Folien Ippa Ce Leam more about monitoring folders vf gd iens pere deleted from library Sika Hee emailer han ahd gahar kanig sine for afl oen ele Pia fies 100 KE Vielen fina K KB di adwanced Qpbona CHR Carel In the Add Folder window select a folder with music photos or videos that you want to share with other devices and click OK In the Add To Library window the newly added folder is shown You can add more folders to share Click the OK button to add the files to the library Add to Library by Searching Computer P Adding fles to the ibrar You can now enjoy music photos and videos on your TV Change other settings Green eco settings 1 While watching TV press the green button 2 Select one of the following settings then press OK e Energy saving Applies a combination of picture set
2. Tip If you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV Switch channels e Press te on the remote control or P CH on the side of the TV e Press LD then select Channel list to use the channel list e Press D to return to the previously viewed channel e Enter a channel number using the Numeric buttons To view analogue or digital channels only Filter the channel list to access analogue or digital channels only 1 In the channel list press B 2 Select Select list gt Analogue channels or Digital channels then press OK Depending on your selection only digital or analogue channels become available Adjust volume To increase or decrease volume e Press on the remote control e Press 41 on the side of the TV To mute or unmute sound e Press amp to mute the sound e Press K again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 26 Use Smart picture settings Use the Smart picture expenence bar to access frequently used picture settings 1 While watching TV press Ul 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings
3. Audio Out L R If the sound does not match the video on If there is no digital audio output on the screen you can set a delay on most home home theatre you can use the TV s theatres to match the sound and video analogue Audio Out L R connection Do not connect the audio signal from a Audio and Video synchronisation sync DVD player or other device directly to the home theatre Always lead the sound through the TV first EN 4 English Dig receiver satellite First use two antenna cables to connect the antenna to the receiver and the TV e Antenna Digital receiver Satellite receiver m lt Scart Digital receiver Satellite receiver l Gnoes s 00M XT Dig receiver and DVD R First use three antenna cables to connect the digital receiver and the DVD Recorder to the TV EN 42 Then use a SCART cable to connect the digital receiver to the TV lt Scart Digital receiver Satellite receiver z CL JOAO XT Finally use two SCART cables to connect the two devices and the TV Dig receiver DVD R and HTS First use three antenna cables to connect the two devices and the TV PN Antenna Antenn Out In OW BN 43 English Then use two SCART cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV lt gt Scart Digital TV receiver DVD Recorder gu Aux am oo oo Then use an HDMI cable to connect the Home Theatre System to th
4. Picture formats are also accessible via the experience bar menu OMD and Setup menu The following picture formats can be selected e Auto fill Adjusts the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarges the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC EN 34 e Super zoom Removes the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scales the classic 4 3 format to 16 9 Not recommended for HD or PC e Wide screen Stretches the classic 4 3 format to 16 9 e Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Notes e Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Add new device Notes e Before watching a connected device you must add it to the home menu e HDMI ARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu 1 Connect and switch on the device 2 Press fft 3 Select Add your devices then press OK Follow the on screen instructions Watch connected device 1 Press ft 2 Select the device from the home menu 3 Press OK to confirm your choice Use Ambilight Switch Ambilight on Enjoy a mo
5. e Treble Adjusts the treble level e Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e Balance Adjusts the balance of the left and right speakers to best suit your listening position EN 26 Reset to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 While watching TV press ft 2 Select Setup gt Advanced TV settings gt Factory settings then press OK TV settings are reset back to the factory default Start a TV demo Start a demo to find out more about your TV s features Note Demos are not supported on MHEG channels 1 While watching TV press ft 2 Select Setup gt TV demonstrations then press OK 3 Select a demo then press OK 4 Press D to exit the demo Change channel settings Reorder channels After installation you may want to reorder the channel list to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Reorder then press OK 5 Select the channel to reorder move it to the desired location then press OK 6 Select Insert to insert the channel into the desired location Swap to swap location with another channel or Cancel to
6. e Check that the volume is not set to 0 e Check that the sound is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the HDMI CEC enabled EasyLink compliant HTS device Sound should be heard from the HTS speakers There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only Verify that sound balance is set to the Centre HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only EN 55 English You cannot use EasyLink features Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume
7. e View upcoming programmes e Group programmes by genre e Set reminders when programmes start e Set up preferred EPG channels Note EPG is not available in all countries Switch on EPG 1 Press LL 2 Select Programme guide then press OK EN 18 EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options These options are only accessible for 8 days of TV channel information 1 When in EPG press B 2 Press the Navigation buttons and OK to select and adjust e Set reminder Sets programme reminders e Clear reminder Clears programme reminders e Change day Sets the EPG day Select Today Next day or Previous day e More info Views programme information e Search by genre Searches TV programmes by genre e Scheduled reminders Lists programmes reminders e Preferred channels Sets preferred EPG channels Use teletext Select a page Press LLI Select Teletext then press OK Select a page by Entering the page number with the Numeric buttons WN e Pressing orie1 to view the next or previous page e Pressing the Colour buttons to select a colour coded item 4 Press D to exit teletext Access teletext options 1 When in teletext press amp 2 Select an option e Freeze page Unfreeze page Freezes or unfreezes the current page e Dual screen Full screen Enables or disables dual
8. gt On 3 Press OK to activate Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV The video image is thus stretched across the whole of your TV display without the need to create a separate subtitle bar at the bottom of the screen To enable auto subtitle shift 1 Press ft 2 Select Setup gt Advanced TV settings gt EasyLink gt Auto subtitle shift gt On 3 Press OK to activate EN 50 Audio only mode Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby If available audio only mode is triggered from the connected Philips EasyLink device accept the prompt on the TV to enable audio only mode Enable or disable EasyLink Remote Control Caution This is an advanced setting Verify that all connected HDMI CEC compliant devices support this setting Devices that do not support this setting will not respond to commands from the TV remote control 1 Press ft 2 Select Setup gt Advanced TV settings gt EasyLink gt EasyLink Remote Control gt On or Off 3 Press OK to activate Notes e If you cannot exit from the connected device s menu press 2 e To switch back to TV control press ft and select Watch TV e To control another device press fft and select the device from the home menu e Asummar
9. to the home menu The Browse all page holds all services On the Browse all page you can view the Net TV services by category Select a category and press OK Browse another country On the Browse all page you can switch the Net TV country Another country might have different services Select Browse select another country then press OK Mark favourite Net TV pages You can mark up to 12 Net TV pages or services as favourites for easy access Favourite pages are marked with stars Note Only Net TV services can be marked as favourites Advertisements and open Internet websites cannot be marked Mark favourite Net TV pages 1 In Net TV press B 2 Select Bookmark this page then press OK 3 Press B to exit Note Only Net TV services can be marked as favourites Advertisements and open Internet websites cannot be marked All your favourite services are shown in the Net TV start page On the Bookmarks page favourite services are marked with a star Access a web page Note Some open Internet websites are not tailored to display on a TV screen and may not display correctly on your TV 1 Press QU Browse 2 Select Go to address then press OK 3 Select the text entry field then press OK 4 Select numeric alphabet symbol then press OK to confirm each entry 5 Select Go to address then press OK to view the web page Use the on screen remote control Use the on screen remo
10. 2 Press QO then select Teletext and press OK EN 20 3 Enter the three number page number of the subtitles page usually 888 4 Press O to exit teletext Subtitles display if available 1 Press GJ 2 In the menu that appears select Off On or On during mute then press OK Note With On during mute the TV displays subtitles only when the sound is muted with K PHILIPS TELEVISION This feature is only supported on selected digital channels 1 While watching TV press B 2 Select Subtitle language 3 Select a subtitle language from the list then press OK Note More information about language settings Is available in Set up the TV gt Change language settings gt Audio Subtitle Teletext languages Page 29 Access Video store Benefits Watch and store video rented through Net TV To enjoy Net TV connect the TV to a router with a broadband connection to the Internet see Set up the TV Set up a network see NonPublish on page 29 Insert an SD card Caution Make sure that you follow the instructions described below Incorrect insertion of the SD card may damage your SD card Any existing content stored on the SD card will be erased prior to the downloading of rented videos Notes e This TV has a standard SD card slot and the SD card is solely for use in Videostore e Use a blank SD memory card The SD card should have a minimum storage capacity of 4 GB For high d
11. Ambilight between relaxed and dynamic levels This feature is only available when Ambilight Colour is set to Dynamic e Brightness Adjusts the brightness of Ambilight e Colour Selects a predefined colour e Custom colour Fine tunes predefined colours e Separation Adjusts the difference in colour levels between each side of the TV Turn off this feature for a dynamic and uniform Ambilight colour e TV switch off Selects how the TV switches off e Lounge light mood Selects a lounge light mode This setting is applied when lounge light is enabled in standby mode e Scenea lounge light Turns Scenea lounge light on or off e Wall colour Selects a colour to match the wall colour so that Ambilight colours are adjusted to display correctly Enjoy Net TV Benefits Koninklijke Philips Electronics N V bears no responsibility for content provided by Net TV service providers EN 5 English Net TV offers Internet services and websites tallored for your TV Use the TV remote control to browse the Net TV Internet pages You can play movies view pictures listen to music consult infotainment play games and much more all from your TV screen e Because Net TV is an online system it can be modified over time to better serve its purpose e Some Net TV services can be added changed or stopped after some time e Net TV displays pages across the full screen one page at a time e You
12. Net TV Accesses Net TV Scenea Switches to the Scenea wallpaper Show widgets Accesses widgets by online service providers Only available if connected to the Internet Add your devices Adds new devices to the home menu Setup Accesses menus that allow you to change picture sound and TV settings Browse The browse menu gives you easy access to TV channel list Electronic Programme Guide Teletext To access the browse menu while watching TV press W 1 Press the Navigation buttons to select an Item e Channel list Accesses the TV channel list Programme guide Accesses the Flectronic Programme Guide Teletext Accesses teletext 2 Press OK to confirm your choice Experience Press 080 to access the experience bar menu which provides a range of frequently used settings The experience bar menu gives you easy access to Ambilight Turns Ambilight on or off Ambilight active mode Adjusts the speed of Ambilight response Picture format Changes the picture format Smart picture Frequently used picture settings Smart sound Frequently used sound settings Speakers Configure TV speakers for Philips EasyLink Picture shift Adjusts the position of the picture EN 11 English Channel list The channel list displays the T V channels and possible radio stations installed on your TV 1 While watching TV press LLL 2 Select Channel list then pre
13. Never install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV EN 3 English Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e lo easily disconnect the TV power cord from the power socket ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power socket Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e Avoid stationary images as much as possible Stationary images are images that remain on screen for
14. Open the battery cover on the back of the remote control to insert the batteries Type AAA LRO3 1 5 V Make sure the and ends of the batteries line up correctly and are marked inside Remove the batteries if you are not using the remote control for a long time Dispose of batteries according to the end of use directives Read Get started gt Important gt End of use On screen remote control An On Screen Remote Control OSRC is available which gives you easy access to commonly used functions Availability of on screen buttons differs according to your TV setup To access the OSRC 1 While watching TV or a connected device press B 2 Select Show device keys then press OK 3 Use the Navigation buttons and OK to select and use an on screen button Basic TV menus Home The home menu lists the activities you can do with your TV 1 Press ft 2 Select an icon in the home menu then press OK to launch the activity 3 To exit the home menu press fft again or 9 A N To start an activity highlight the desired item with the Navigation buttons and press OK Watch TV Switches back to the antenna source if another source is selected Rented videos Accesses an Internet portal to browse and purchase videos Browse USB If a USB storage device is connected accesses the content browser Browse PC Switches back to the antenna source if another source is selected Browse
15. a file Select the file you want to play in the content browser then press OK e To pause or stop playback press OK again e To jump to the previous or next file press i OF m Music settings e Repeat Repeats a song or an album e Shuffle on Shuffle off Enables or disables random play of songs Picture slideshow settings e Rotate Rotates a picture e Repeat Repeats the slideshow e Shuffle on Displays pictures in the slideshow at random e Shuffle off Disables random display of pictures in the slideshow e Slideshow speed Sets the amount of time that a picture is shown EN 21 English e Slideshow transition Sets the transition from one picture to the next Browse PC network View photos or play music and videos on TV from a PC or another storage device in your home network To browse your PC network first set up the network connection see Set up the TVSet up a network see NonPublish on page 29 If the network is not installed the first time you access Browse PC the network installation starts Follow the on screen Instructions Browse PC Network In the home menu select Browse PC then press OK With the PC and router switched on the TV displays the multimedia server content from your PC With the PC content list open on screen select the file you want to play and press OK A song a slideshow of photos or a video starts playing e To pause press OK
16. again e To jump to the next file press m e To jump to the previous file press s e To fast forward a music file press Press B Options to access more options such as Play once Repeat Shuffle on Shuffle off Rotate Watch videos Select a video in the Guide menu and press play OK e o pause the video press pause OK e o fast forward press once to go slowly press twice to go fast e Press again for normal speed Press B Options to change to Full screen Small screen Play once and more To exit the PC network press fft and select another activity EN 22 Use Scenea You can use Scenea to display a picture as wallpaper on your TV Make sure that the location of your TV is set to Home mode Single picture wallpaper 1 Press fft 2 Select Scenea then press OK The default or pre loaded picture is displayed Wallpaper slideshow Make sure the wallpaper is not yet activated 1 Connect a USB storage device to the TV 2 Press ft 3 Select Scenea then press OK All pictures in the USB storage device are displayed Note If the sleeptimer is off the wallpaper is displayed for 120 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your TV gt Use timers and locks gt Sleeptimer Page 19 Note he file size of the picture must not be more than 1 MB 1 Connect the USB stora
17. by pressing the green button on the remote control These green eco settings include e Energy saving picture settings he Energy saving smart setting applies a combination of picture settings to reduce energy consumption e Ambient light sensor To save energy the built in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens e Mute screen Turns off the TV display Other functions including sound continue to operate normally Muting the screen saves energy if you just want to listen to audio from the TV See Set up the TV gt Change other settings gt Green eco settings Page 33 for more information about these green eco settings Built in green eco settings e low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality e Dedicated power switch Completely cut off power to the TV with the dedicated power switch located on the bottom of the set e Advanced power management The advanced power management of this TV ensures the most efficient use of its energy To view how your personalised TV settings affect the TV s relative power consumption press ff and select Setup gt Demo gt Active Control We continually focus on lowering the environmental impact of our innovative consumer products We aim our efforts
18. cancel the reorder 7 Press OK to activate Rename channels After installation you may want to rename channels to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press amp 4 Select Rename then press OK 5 In the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once complete press the Navigation buttons to select Done e lo clear the entry select Clear e o cancel select Cancel 7 Press OK to confirm your choice 8 Press D to exit Hide or unhide channels Hide channels Hide channels from the channel list to prevent unauthorised access 1 While watching TV press LL 2 Select Channel list then press OK 3 In the channel list select the channel to hide then press amp 4 Select Hide channel then press OK The channel is hidden Unhide channels 1 While watching TV press LLL 2 Select Channel list then press OK 3 In the channel list press amp 4 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed 5 Select the channel to unhide then press 5 6 Select Unhide channel then press OK Repeat steps 5 and 6 to unhide other channels Update channel list When the TV was switched on for the first time a full installation of channels was perfo
19. coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25 kg 55 Ibs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage e Before you connect the TV to the power socket ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power socket if the voltage is different Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the mounting surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating e
20. e MPEG audio mp2 mp3 mpg mpeg vob MPEG 1 Layer 2 MPEG 1 Layer 3 LPCM AC3 e MPEG 4 video mp4 MPEG 4 AVC H 264 L2 CIF MPEG 4 AVC H 264 L4 HD e MPEG 4 audio mp4 AAC LC AAC HE e WMV video wmv WMV9 VC1 e WMA audio wma WMA v2 to v9 2 Multimedia file names must not exceed 128 characters Supported DLNA compliant media server software e Windows Media Player for Microsoft Windows e Twonky Media for Microsoft Windows and Mac OS X e Sony Vaio Media Server for Microsoft Windows e Versity for Microsoft Windows e Nero MediaHome e DiXiM for Microsoft Windows XP e Macrovision Network Media Server for Microsoft Windows e Fuppes for Linux e uShare for Linux This is not a comprehensive list Check http www dlna org for the latest updates Supported DLNA audio video files e WMV video wmv WMV9 VC1 e MPEG audio mp2 mp3 mpg mpeg vob MPEG 1 Layer 2 MPEG 1 Layer 3 LPCM AC3 e MPEG 4 video mp4 MPEG 4 AVC H 264 L2 CIP MPEG 4 AVC H 264 L4 HD EN 58 e MPEG 4 audio mp4 AAC LC AAC HE Connectivity Rear e EXT 2 SCART RGB CVBS e EXT 3 Component Y Pb Pr Audio L R e Headphones Stereo 3 5 mm mini jack e SERV U Service port e Network Ethernet Bottom e EXI 1 SCART RGB CVBS e HDMI 1 ARC HDMI Audio Return Channel HDMI 2 3 HDMI e DIGITAL AUDIO OUT Coaxial e AUDIO IN DVI
21. ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings Factory standard settings e Standard Adjusts picture settings to suit most environments and types of video e Photo Ideal settings for viewing photos EN 43 English e Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit Use Smart sound settings Use the Smart sound experience bar to access frequently used sound settings 1 While watching TV press DED 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menus in Setup e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 3 Press OK to confirm your choice 4 Press D to exit Change picture format Change the picture format to suit your viewing experience 1 Press i3 2 Select a picture format then press OK to confirm your choice Note
22. screen teletext which splits the current channel or source to the left of the screen with teletext on the right e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e T O P overview Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers e Enlarge Normal view For more comfortable reading you can enlarge the teletext page Press the Navigation buttons to move around the enlarged screen e Cycle subpages Cycles through subpages automatically if subpages are available e Languages Switches to a different language group to display a language correctly when that language uses a different character set 3 Press B to exit the options menu Select a teletext language Some digital TV broadcasters have several teletext languages available You can set your primary and secondary language 1 Press fft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Languages gt Primary teletext or Secondary teletext 3 Select your preferred teletext languages then press OK Select subpages A teletext page number can hold several subpages These subpages are shown on a bar next to the main page number When available on a teletext page press Or to select subpages Search teletext 1 When in teletext press OK to highlight the first word or number
23. switched off if it is set to zero minutes EN 19 English 4 Press OK to activate the sleep timer The TV switches to standby after the set period of time Child lock To prevent children from watching TV you can lock the TV or block age rated programmes Set or change the child lock code 1 Press fft 2 Select Setup gt Advanced channel settings Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock Age rating Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings higher than your child s age 1 Press fft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Child lock gt Parental rating A message appears prompting you to enter the child lock code 3 Enter the child lock code with the Numeric buttons 4 Select an age rating then press OK All programmes beyond the selected age rating are blocked For information on child lock codes see Use more of your TV gt Use timers and locks gt Child lock Subtitles 1 Switch the TV to an analogue TV channel
24. 2 Press the Navigation buttons to skip to the word or number to search 3 Press OK to begin the search 4 Press 4 until no word or number is highlighted to exit the search Use digital teletext Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels for example BBC When in digital teletext e Press the Navigation buttons to select or highlight items e Use the Colour buttons to select an option then press OK to confirm or activate Note Digital text services are blocked when subtitles are broadcast and Subtitles are enabled Read Use more of your TV Use subtitles Page 20 Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 Is broadcast by a channel it is switched on by default To switch Teletext 2 5 on or off 1 Press ft 2 Select Setup gt Advanced TV settings gt Preferences gt Teletext 2 5 gt On or Off then press OK Use timers locks and subtitles Sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press ft 2 Select Setup gt Advanced TV settings gt Preferences gt Sleeptimer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of five minutes The sleeptimer is
25. 2 Select Setup gt Advanced TV settings gt EasyLink gt TV speakers 3 Select one of the following options then press OK e Off Turn off TV speakers e On Turn on TV speakers e Easylink TV audio continues to be streamed through the TV speakers Switch the TV audio to the connected HDMI CEC audio device through the experience menu e Easylink autostart Turn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Switch TV audio in experience menu If EasyLink or EasyLink autostart are selected access the experience menu to switch the TV audio 1 While watching TV press ON 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Streams TV audio through TV speakers until the connected HDMI CEC audio device switches to system audio control Thereafter T V audio is streamed through the connected device e Amplifier Streams audio through the connected HDMI CEC device If system audio mode Is not enabled on the device audio will continue to stream from TV speakers if EasyLink was selected If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode EN 51 English Use HDMI ARC The HDMI 1 connector is HDMI Audio Return Channel ARC compliant Use it to output digital audio to an HDMI Home Theatre System EN 52 HDMI ARC allows you to use Ph
26. 56 PC connection issues 56 Technical data 57 Overview 57 Power and reception 5 Display and sound 5 Display resolutions Sy Multimedia 34 Connectivity 58 Dimensions 58 Index 60 1 Get started Important Congratulations Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at http www philips com welcome Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power socket immediately Contact Philips Consumer Care to have the TV checked before use e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times D Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force
27. I ARC compliant device such as a home theatre system 5 ge 5 AUDIO IN Audio input from a computer 6 ANTENNA Signal input from an antenna cable or satellite 7 NGA Video input from a computer Side 2 USB Data input from USB storage devices 3 CI Common Interface Slot for a Conditional Access Module CAM 4 SD CARD Slot for an SD memory card 1 1 HDMI Digital audio and video input from high definition digital devices such as Blu ray players Connect devices Blu ray disc player Use an HDMI cable to connect the Blu ray disc player to an HDMI connector on the bottom of the TV E S dd Blu ray Disc Player H Occ 0 00M HDMI EM 393 English DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the bottom of the TV Q i i CoS e664 000M HDMI DVD Recorder First use two antenna cables to connect the antenna to the DVD recorder and the TV Finally use a SCART cable to connect the DVD Recorder to a SCART connector on the bottom of the TV pvp Recorder gt lt EN 40 Home Theatre System First use an HDMI cable to connect the device to the TV Q re System DVD Home Theat CONSE SS 00M Finally use a digital audio cinch cable to connect the device to the TV or alternatively use the analogue Audio Out L R Qy Digital Audio DVD Home Theatre System PN zm Digital Audio ze Out
28. OK Set folders for media sharing In TVersity click the Sharing tab TP TWersiby EE Fe Vie Abeer Hel ibt b seniper B Click the green plus icon and select Add folder Add Fila Add Dnbarrest Meda Beld Podcast REE Faa In the Add media pop up window click the Browse button Tara Fia Wer Advanced 1mekp T pri Search ige EY Audo E Phs E video Advanced gt Susberut Cancel Emme In the Browse for Folder window select a folder with music photos or videos that you want to share and click OK Twonky Media v4 4 2 on Macintosh OS X Enable media sharing In Mac OS X start Twonky Media Twonky Media appears In the Basic Setup box click Clients Security Clients Security settings appear Click Enable sharing for new clients automatically then click Save Changes Media sharing is enabled Add folders for media sharing In the Basic Setup box click Sharing Sharing settings appear U haer nan en m Dmh hii L ru Ln LEM PVEN Een COFCO EE TE AES GEN HEL COT RG CURCER DH IHR VERH IC BUST EOS IH Ted EN Ran iem Rot s m oram bpm eg arm be n pera y daaim reen Fe eers LL sd u Cte HE HELE T HAS Di ae ETA HOT PE DD BAE EEG DEHN A EEND ed BHP De mame enn een ene coca dn rcg umo m neen ee een aren yee et PME Met EH Efi Click Browse to add a folder location Click Add new content directory to add more folders When all fold
29. OK 3 In the list that appears select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual installation menu select Find channel then press OK 2 Press e The Navigation buttons or Numeric buttons to manually enter the channel frequency e The Navigation buttons to select Search Press OK to automatically search for the next channel 3 When the correct channel frequency is entered select Done then press OK EN 28 4 Select Store current channel to store the fine tuned channel using the current channel number or select Store as new channel to store it as a new channel number Fine tune digital channels If you receive digital TV broadcasts DVB you can verify the quality and signal strength of a channel If the reception is poor you can for example reposition your antenna or satellite dish to try to improve the reception For best results though always contact a professional installer 1 Select the channel to test then press fit 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Channel installation gt Digital Reception test gt Search then press OK The digital reception quality is shown for this channel If the reception is poor reposition your antenna or satellite dish and repeat the procedure Notes e You can enter a specific digital frequency yourself Select
30. Preferences menu 1 Press fft 2 Select Setup gt Advanced TV settings gt Preferences gt Universal access gt On then press OK Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired To switch on hearing impaired audio and subtitles if available 1 While watching TV press amp 2 Press the red button to select Hearing impaired 3 Press the green button to switch on hearing impaired audio and subtitles press the red button to switch it off 4 Press D to exit Tip To verify whether a hearing impaired audio language is available press B and select Audio language Languages with an ear icon indicate hearing impaired support Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 While watching TV press B 2 Press the green button to select Visually impaired 3 Use the following buttons to select e Green Speakers Hear visually impaired audio from speakers only e Yellow Headphones Hear visually impaired audio from headphones only e Blue Speakers headphones Hear visually impaired audio from speakers and headphones only e Red Off Turn off visually impaired audio 4 Press D to exit Tip To verify whether visually impair
31. Register your product and get support at www philips com welcome EN User Manual PHILIPS sterreich Belgi Belgique BbArapua Hrvatska Cesk republika Danmark Estonia Suomi France Deutschland EAAada Magyarorszag Hrvatska lreland Italia Ka3akcTaH Latvia Lithuania Luxemburg Luxembourg Nederland Norge Polska Portugal Romania Poccua Cp6uja Slovensko Slovenija Espana Sverige Suisse Schweiz Svizzera T rkiye United Kingdom VYkpaiHa 0810 000 205 078250145 3592 489 99 96 01 6403 776 800142840 3525 8759 6008600 09 2311 3415 0805 025 510 0800 000 7520 0 0800 3122 1280 0680018189 0800 222778 North 0800 055 6882 South 1800 PHILIPS 7445477 800 088774 7 727 250 66 17 52737691 67228896 40 6661 5644 0800 0230076 22 70 81 11 022 349 15 05 800 780 903 0800 894910 0318107125 495 961 1111 381 114 440 841 0800 004537 00386 12 80 95 00 900 800 655 08 5792 9100 0844 800 544 0800 261 3302 General No 0800 331 6015 General National Rate No 0870 911 0036 8 800 500 69 70 Model Serial 0 07 pro Minute 0 03 Per minuut Par minute MecreH pa3roBop Lokalni poziv Bezplatny hovor Lokalt opkald kohalik kone tariifi paikallispuhelu num ro sans frais geb hrenfreier Anruf KAnon xwpig xpewon Ingyenes hivas free free Numero Verde local local local Ortsgesprach Appel local Gratis nummer Lokalsamtale Monitory i akcesoria ko
32. V First connections Power Be sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time EN 36 Antenna Locate the antenna connector at the back of the TV Insert the antenna cable securely into the antenna connector Note To receive DVB S broadcasts insert the antenna cable into the SAT DVB S connector on the side of the TV This is available on certain models only Antenna M About cables Overview Before you connect devices to the TV verify which connectors are available on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of picture and sound The connections shown in this user manual are recommendations only Other solutions are possible Tip If your device only has composite RCA connectors use a SCART cinch adapter to connect the device to a SCART connector on the TV HDMI An HDMI connection has the best picture and sound quality e One HDMI cable combines video and audio signals Use HDMI for High Definition HD TV signals and to enable EasyLink e The HDMI ARC connector on the TV features HDMI ARC functionality This allows output o
33. VGA stereo 3 5 mm mini jack e Antenna 75 ohm coaxial e VGA PC input Side e HDMI e USB e SD card e Common Interface CI Dimensions Note Dimensions and weights are approximate values only Design and specifications are subject to change without notice 32PFL7605H Without stand Width 777 mm Height 4 2 mm Depth 42 mm Weight 9 5 kg estimate With stand Height 540 mm Depth 221 mm Weight 11 6 kg estimate 37PFL7605H without stand Width 898 mm Height 554 mm Depth 42 mm Weight 12 kg estimate with TV stand Height 602 mm Depth 242 mm Weight 15 kg estimate 40PFL7605H without stand Width 966 mm Height 593 mm Depth 41 5 mm Weight 13 kg estimate With stand Height 641 mm Depth 242 mm Weight 16 kg estimate 46PFL7605H without stand Width 1103 mm Height 669 mm Depth 42 4 mm Weight 17 8 kg estimate With stand Height 16 mm Depth 265 mm Weight 21 4 kg estimate UMv 3139 137 03592 18 02 2010 EN 99 English 8 Index A age rating 18 Ambilight 7 Ambilight settings 14 Ambilight active mode 14 Ambilight switch on 14 audio language 26 audio lip sync 31 B bottom connectors 35 C CAM enable 46 CAM insert 46 care 5 channel list 11 channels favourites 17 channels fine tune analogue 26 channels fine tune digital 26 channels hide or unh
34. able to connect the camcorder to the back of the TV Audio L R Audio L R SI mu Ss EN 47 English Channel decoder 3 Set the channel you want to decode 4 Select Status then the location of the Before using a SCART digital channel decoder decoder select the channel to decode and 5 Press OK assign the decoder to the SCART connector 1 Press ft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Channel installation gt Decoder gt Channel PC Connect a computer using one of the following cables HDMI cable DVI HDMI cable AUDIO IN DVI VGA mio EN 48 HDMI cable and HDMI DVI adapter AUDIO IN DVI VGA VGA cable Use Philips EasyLink Enable or disable EasyLink Philips EasyLink provides several features that enable you to control devices that are connected via HDMI Connected devices must support the HDMI CEC standard and must be properly configured for EasyLink to work Note HDMI CEC functionality is known by other names on other brands Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink To enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press ft 2 Select Setup gt Advanced TV settings gt EasyLink gt On or Off then press OK EasyLink features With Philip
35. atural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings Factory standard settings e Standard Adjusts picture settings to suit most environments and types of video e Photo Ideal settings for viewing photos e Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit More picture settings 1 Press fft 2 Select Setup gt Advanced TV settings gt Picture then press OK 3 Select a setting to adjust e Smart picture Accesses pre defined smart picture settings e Reset Resets to factory default settings e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas e Colour Adjusts colour saturation e Hue Compensates colour variations in NTSC encoded transmissions e Sharpness Adjusts sharpness in the Image e Noise reduction Filters and reduces noise in an image e Tint Adjusts the colour balance in an Image e Custom tint Customises tint setting e Pixel Plus HD Accesses advanced settings including 100 Hz Clear LCD Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement HD Natural Motion Gamma e PC mode Enables picture settings adjustment whe
36. cannot download and save files or install plug ins What you need To enjoy Net TV connect the TV to a router with a broadband connection to the Internet For more information on network setup see Set up the TV gt Set up a network see NonPublish on page 29 Internet A Router First use The first time you link up to Net TV the TV asks you to agree to the Terms of Use When you agree to these terms the TV asks you to register for Net TV After registration you can switch on the Parental control setting Registration benefits When you have registered for Net TV the pages you select as favourite pages or as locked pages are stored as back up The last 16 web addresses URLs you visited are also stored EN 16 You can share these same selections with another Net TV television if you register that TV with the same email address When registered you can restore these same selections after an accidental reset of Net TV with Clear history list How to register To register you need an email address and a PC connected to the Intemet If you skip the registration at first use you can register from the Net TV start page later on To start the Net TV registration enter your email address on the TV screen Use the keypad on the remote control as you do for SMS text messaging to enter the address Follow the on screen instructions A message appears if a registration email is sent to your email addres
37. daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled for your time zone TV location A range of TV settings are applied to suit the location of the TV Shop or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all TV settings 1 While watching TV press ft 2 Select Setup gt Advanced TV settings gt Preferences gt Location gt Home or Shop then press OK EN 34 Stand mount or wall mount Specific TV settings are applied to suit the mounting location of the TV 1 In the Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update the TV software Check software version 1 Press ft 2 Select Setup gt Update software then Advanced software update gt Current software info then press OK The version of the current software Is displayed From the Internet If your TV is connected to a router that is connected to the Intemet you can update the TV software directly from the Internet You need a high speed Internet connection Press fft gt Setup gt Update now and press OK Select Internet and press OK Follow the In
38. e TV QS DVD Hom e Theatre System c ie CNS eq 00M HDMI Finally use a digital audio cinch cable to connect the Home Theatre System to the TV A Digital Audio ome DVD Home Theatre System Mid i EN 44 Dig HD receiver First use two antenna cables to connect the Digital HD receiver to the TV ce Antenna 1 Press DAD 2 Select Smart picture gt Game then press OK 3 Press D to exit Connect more devices Game console The most practical connections for a game console are at the side of the TV However connectors are available at the back of the TV if needed Enable game mode To prevent picture delay set the TV to Game mode EN 45 English The most practical connections for a game console are at the side of the TV If you cannot use the side connector use an HDMI or the EXT3 YPbPr and Audio L R cable to connect the game console to the back of the TV EN 46 Dig camera To view pictures on your digital camera connect it to the USB connection at the side of the TV and switch it on If the content of your camera does not appear automatically you may need to enable Picture Transfer Protocol PTP on the camera Refer to the camera s user manual for instructions Dig camcorder The most practical connection for a camcorder is at the side of the TV If you cannot use the side connector use an HDMI or the EXT2 YPbPr and Audio L R c
39. e next or previous channel In the home menu these buttons allow you to move vertically 4 Ambilight Switches Ambilight on or off During TV standby switches Loungelight on or off 1 Ambient sensor remote control sensor Remote control Overview 1 Standby Switches the TV to standby if it Is on Switches on the TV if it is in standby 2 ft Home Accesses the home menu 3 00 Browse Accesses the browse menu to select TV channel list the Electronic Programme Guide and teletext 4 a Navigation buttons TET menus and selects items 5e i Previous Next Selects the previous or next channel Skips to the previous or next page of the menu Also skips to the previous or next track album or folder 6 OK Confirms an entry or selection EN 9 English e Te 7 JN Experience Accesses the experience bar menu 8 B Options Accesses options for the current activity or selection 9 Volume and amp Mute Increases or decreases volume mutes or restores audio AGHI E JKL f Se 11 Jrors amp gruv j 10 Colour buttons Selects tasks or options 11 0 9 Numeric buttons Selects a channel or setting 12 Picture format Selects a picture format 14 LOANO 136 Subtitle Enables or disables subtitles 14 5 Back Returns to a previous menu screen Press and hold to return to watching TV EN 10 Batteries
40. ect Common interface then press OK 3 Select a CAM application then press OK The selected CAM application is enabled EN 53 English 6 Troubleshooting Contact us If you cannot resolve your problem refer to the FAQs for this TV at http www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in the leaflet accompanying your product Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty General TV issues The TV does not switch on e Disconnect the power cable from the power socket Wait for one minute then reconnect tt e Check that the power cable is securely connected e Check that the power switch on the bottom back of the TV is switched on The TV does not respond to remote control or side controls when switched on The TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behaviour The standby light on the TV blinks red Disconnect the power cable from the power socket Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care EN 54 You forgot the code to unlock the ch
41. ed audio is available press B and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 In the Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press D to exit BN 23 English Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 Press the green button to turn on audio feedback or press the red button to turn it off 3 Press D to exit EN 24 4 Set up the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching TV press ft 2 Select Setup gt Personalise picture and sound then press OK 3 Select Start then press OK Follow the on screen instructions to choose your preferred settings Smart picture settings Use the Smart picture expenence bar to access frequently used picture settings 1 While watching TV press DED 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e N
42. efinition video make sure that you use an SD card with a minimum capacity of 8 GB 1 Before you insert the SD memory card remove the Conditional Access Module from the TV 2 Insert a blank SD memory card with its front label facing out into the SD CARD slot Watch rented videos In the home menu select Rented videos gt Rent videos and press OK Follow the instructions on screen Access multimedia Browse USB Watch photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Connect a USB storage device While the TV is on connect the USB device to the USB port on the side of your TV The USB content browser appears e To rewind or fast forward a file press a ore e _ Press O to exit content browser e While playing a file press B to access settings catered to your file type Video settings e Small screen Plays video in a small screen e Full screen Plays video across the whole screen e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos Notes e The USB content browser is also accessible by selecting Browse USB in the home menu e If you connect multiple USB storage devices via a USB hub a message appears prompting you to select a device Select the device then press OK Play
43. erience The light also reduces eyestrain thus providing a more relaxing viewing experience See Use your TV gt Use Ambilight see NonPublish on page 14 Digital TV In addition to normal analogue TV broadcasts your TV can receive digital terrestrial DVB T broadcasts Where available your TV can also receive digital cable DVB C and digital radio broadcasts DVB Digital Video Broadcasting gives you a better picture and better sound quality Some broadcasters also have several audio speech and or teletext languages available with digital broadcasts Programme guide EPG Flectronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre e Set reminders when programmes start e Set up preferred EPG channels EN 7 English Notes e EPG is not available in all countries e For more information on EPG see Use more of your TV gt Use EPG Page 18 Net TV Net TV allows you to enjoy movies music and other infotainment from the Internet directly on your TV screen See Use your TV gt Enjoy Net TV see NonPublish on page 15 To enjoy Net TV you must connect the TV to a network See Set up the TV gt Set up a network see NonPublish on page 29 Video store The Philips Video store gives you access to a wide range of high quality movies
44. ers are added click Save changes then click Rescan content directories Media files are ready to be accessed from the TV Microsoft Windows Media Player 11 Note The instructions are applicable to both Microsoft Windows XP and Vista Enable media sharing In Microsoft Windows start Windows Media Player 11 Windows Media Player appears A Windows Media Player da Music Liey Songs Create Playlist Cabell a e Play Albur Create Aute Playlat E Creche Playlist a Jd Library do Mu E Aemet Added Pichares B Batist Video AL Recorded Tv fi Songs z Dike Uy Genre i 5 Year dudd to Library iy Rating EES Appi Meda Information Changer Juda Favorites b Liet When Dragging More Optisna Help wath Uparg the Library olm enn gt EE 4 In the Media Sharing window tick Share my Media and click OK EN 32 Media Sharing ENT A Prd wei Share mmc pertes Sed sien on veu nensi Liam abeu ahama nie Svr aug oe ro Feed eani Heal others anc share TT ware my maa Your eheh Meteor 1 amp a private network Decr Hunt vens alim r 1 Bax canem If no network connection is found and you are unable to tick this box click the Networking button to show the Network and Sharing Centre window le bad k Jio Foe Herk dieien a Meriam peed amare enis w bp te D FG Tages F Heteork amd Shaving Cinti yere vergden araj leon es aras Vll wg Camee P n m dan wp od LETH Ce eerie 1 A Ks
45. extended periods of time Stationary images include on screen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage EN 54 End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused 44 When this crossed out wheeled bin symbol Is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health Green eco This TV has been awarded the European Union Ecolabel for its environmental qualities A TV that is awarded the Ecolabel includes the following green eco features that contribute to energy efficient use Adjustable green eco settings Access green eco settings while watching TV
46. f TV audio to an HDMI ARC compliant device e Do not use an HDMI cable longer than 5 metres 16 4 feet 0 0 CN0oS ea 00M Y Pb Pr Use the Component Video Y Pb Pr connection together with an Audio Left and Right connection for sound Match the Y Pb Pr connector colours with the cable plugs when you connect Y Pb Pr can handle High Definition HD TV signals Audio L R YPbPr 200000 O SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle High Definition HD TV signals Coego oon EN 37 English TV connectors overview Rear 1 NETWORK Data input from a network 2 EXT 2 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 3 SERV U For use by service personnel only 4 EXT 3 Component Y Pb Pr Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 5 Stereo audio output to headphones or earphones EN 38 Bottom 1 EXT 1 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 2 DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems 3 HDMI Digital audio and video input from high definition digital devices such as Blu ray players 4 HDMI ARC In addition to normal HDMI functionality outputs T V audio to an HDM
47. ge device to the TV 2 Press ft 3 Select Browse USB then press OK 4 Select a picture then press amp 5 Select Set as Scenea then press OK Listen to digital radio If digital broadcasting is available digital radio channels are installed automatically during installation 1 While watching TV press LL 2 Select Channel list then press OK 3 In the channel list press B 4 Select Select list gt Radio then press OK 5 Select a radio channel then press OK Use widgets What you need Widgets are icons or display boxes which contain information such as weather clock etc The widgets available differ in each country To access widgets connect the TV to a router with a broadband connection to the Internet see Set up the TV gt Set up a network see NonPublish on page 29 Internet en Router Show widgets Add or remove widgets 1 In the home menu select Show widgets then press OK 2 Select the widget to add or remove then press 3 3 Use the navigation buttons to select and OK to confirm your settings Show widgets When watching TV press the blue button to display widgets Universal access Enable universal access Where supported by your digital TV broadcaster this TV allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must turn on universal access in the
48. ide 24 channels install automatic 25 channels install manual 25 channels rename 24 channels reorder 24 channels update 24 child lock age rating 18 child lock overview 18 clock 31 common interface 46 connect device 33 connect antenna 33 connect channel decoder 42 connect PC 43 EN 60 connect PC network 27 connect power 33 connect USB 20 connectors bottom 35 connectors rear 35 connectors side 36 controls side 9 D decoder 42 default settings 24 demo 24 devices add 14 devices watch 14 digital channels fine tune 26 digital channels subtitles 19 digital radio 21 dimensions 50 display resolution 49 E EasyLink buttons 45 EasyLink enable 44 EasyLink features 44 EasyLink RC key forward 44 EasyLink TV speakers 45 end of use 5 environment green eco 5 EPG enable 17 EPG menu 17 EPG overview 17 F factory settings 24 favourites list add 17 favourites list select 17 G green eco overview 5 green eco settings 31 H hearing impaired 21 High Definition HD content 6 home menu 10 home mode 31 information on Internet 8 information on screen 8 install channels automatic 25 install channels manual 25 K kensington lock 6 L language menu 26 language others 26 location home or shop 31 location stand or wall mou
49. ild lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred language When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as It cools down and warms up This does not impact performance When the TV is in standby mode a startup splash screen is displayed then returns to standby mode This is normal behaviour The startup screen is displayed when the TV is disconnected from the mains and reconnected TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation Check that the TV supports DVB T DVB C or DVB S in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture or the picture is distorted e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source e Check that the external device or source is properly connected There is sound but no picture Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Checkthat the antenna is properly connected to the IV e Loudspeakers unearthed audio devices neon lights high buildings and other la
50. ilips EasyLink to output TV audio directly to a connected audio device without the need for an additional digital audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI ARC connectors Enable or disable HDMI ARC Note Enabling HDMI ARC automatically adds the device to the home menu 1 Press fft 2 Select Setup gt Advanced TV settings gt EasyLink gt HDMI 1 ARC gt On or Off 3 Press OK to activate Use a CAM Insert and activate a CAM Caution Be sure to follow the instructions described below Incorrect insertion of a Conditional Access Module CAIM may damage both the CAM and your TV Notes e This TV supports Cl as well as CI CI allows service providers to offer premium HD digital programmes with a high level of copy protection e Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Following the directions printed on the CAM gently insert the CAM into the Common Interface at the side of the TV Push the CAM in as far as it will go 3 Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services Access CAM services 1 After inserting and activating the CAM press B 2 Sel
51. is muted increased or decreased This behaviour is normal when an HDMI CEC audio device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the TV e Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV causing poor playback PC connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate e Set the TV picture format to unscaled EN 56 7 Technical data Overview Product information is subject to change without notice For detailed product information go to http www philips com support Power and reception Power Mains power AC 220 240 V 50 60 Hz Standby power lt 0 15 W Ambient temperature 5 to 40 degrees Celsius For power consumption see the product specifications at http www philips com support Reception Antenna input 5ohm coaxial IEC75 TV system DVB COFDM 2K 8K Video playback NTSC PAL SECAM Digital TV MPEG 4 DVB T Terrestrial DVB C Cable DVB S Satellite MHP Multimedia Home Platform Available in Italy onl
52. ith an HDMI cable playing a Blu ray disc e an upscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air HD broadcaster DVB WEG e a digital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e an HD channel on your DVB C network e an HD game console for example X Box 360 or PlayStation 3 connected with an HDMI cable playing an HD game EN 6 Position the TV e Before positioning the TV read all safety precautions see Get Started gt Important gt Safety e Position the TV where light does not shine directly on the screen e The ideal distance from which to watch TV is three times rts diagonal screen size For example if the diagonal screen size of the TV is 116 cm 46 the ideal viewing distance is approx 3 5m 138 from the front of the screen e While seated your eyes should be level with the centre of the screen e For the best Ambilight effect position the TV between 10 and 20 cm away from the wall Wall mount the TV To mount the TV purchase a Philips TV mount or a compatible TV mount Check your TV screen size and match it against the list for the type of wall mount to purchase 32 inches 81 cm 200 mm x 300 mm M6 37 inches 94 cm 200 mm x 200 mm M6 40 inches 102 cm 200 mm x 200 mm M6 42 inches 107 cm 200 mm x 200 mm M6 46 inches 117 cm 300 mm x 300 mm M8 Warning Follow all instructions provided w
53. ith the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5 cm 2 2 from the back of the TV For 32 inch to 42 inch TVs Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 11 mm max 13 MM For 46 inch TVs Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 15 mm max 18 MM Product highlights Full HD LCD display This TV is equipped with a full High Definition HD LCD display supporting the maximum HD resolution of 1920 x 1080p This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colours The LED backlight of the display offers exceptional picture contrast with exceptional energy saving Ambilight Ambilight is the lighting technology that emanates from the back of the television onto the wall This innovative technology automatically adjusts the colour and brightness of the light to match the TV picture This creates an unprecedented improvement in viewing exp
54. ke BA rage seit Cero Edilio du With i Dd Kapr end ea paer Thin itm nat La GRE a PE Lcona 1c al aat lar ram Parra kar Locas Aaa Came cric asa id alins WE harte ams Discos bebes brs er ons n E Taa rares oF iri dar suam ezen liam end praxrre Best yrsg Baye shaper leer bhas cera re cum ber i paml bp pure qim or ur verd ame die Ter pr Fla earam lur Ae ing iD epi Bahie Feldes simone i oo Msn Feci Purim sen eee u Set Network discovery to On Set File sharing to On Go back to the Media Sharing window in Windows Media Player and tick the Share My Media box Click OK When the TV is connected by the router to the PC and everything is switched on the Media Sharing window will detect the TV as an Unknown Device Select the device and click Allow A End and share mis petures and videa en pour olek ay dunt Rana sen Feed iacha that othe arc ahaa Shui my meda l E Liron Dance Your meteor Metwork Pian prihode network Dear that you sir cmn y oe cecal To change particular settings on media sharing open the Settings window When the device icon the TV is checked with a green tick click OK Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library mos bray Hiig endis bas Wi i rary In the Add to Library window select My folders and those of others that can access and click the Advanced Options button Add To Library dle
55. l access enable 21 V Video store 8 Video store rent videos 19 visually impaired 21 volume adjust 12 volume mute 13 EN 62 PHILIPS OY 2010 Koninklijke Philips Electronics N V All rights reserved Document order number 313913703592
56. mputerowe Chamada Gr tis Apel gratuit Apel local 0 15 USD minute Lokalni poziv Bezplatny hovor lokalni klic Tel fono local gratuito solamente para clientes en Espana Lokalsamtal Schweizer Festnetztarif Sehirici arama free National rate MicueBn BHKAMK This information is correct at the time of press For updated information see www philips com support Contents EN 2 1 Get started 3 Important 3 Enjoy HD TV 6 Wall mount the TV 6 Product highlights P Access more information 8 2 Use your TV 9 Overview 9 Side controls and indicators 9 Remote control 9 Basic TV menus 11 Watch TV 12 Watch a connected device 14 Use Ambilight 14 Enjoy Net TV 15 3 Use more of your TV 18 Favourite channels 18 Use EPG 18 Use teletext 18 Use timers locks and subtitles 19 Access Video store 20 Access multimedia 21 Use widgets 23 Universal access 23 4 Setupthe TV 25 Change picture and sound settings 25 Change channel settings 26 Reinstall channels 27 Change language settings 29 Set up a network 29 Change other settings 33 Update the TV software 34 Reinstall the TV 29 5 Connect the TV 36 First connections 36 About cables 36 TV connectors overview 38 Connect devices 39 Connect more devices 45 Use Philips EasyLink 49 Use a CAM 53 Troubleshooting 54 Contact us 54 General TV issues 54 TV channel issues 54 Picture issues 54 Sound issues 55 HDMI connection issues 55 USB connection Issues
57. n a PC is connected to the TV via HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content e Light sensor Adjusts settings dynamically to match lighting conditions e Picture format Changes the picture format e Screen edges Changes the picture size e Picture shift Adjusts the position of the picture EN 25 English Smart sound settings Use the Smart sound experience bar to access frequently used sound settings 1 While watching TV press DED 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menus in Setup e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 3 Press OK to confirm your choice 4 Press D to exit More sound settings 1 Press ft 2 Select Setup gt Advanced TV settings gt Sound then press OK 3 Select a setting to adjust e Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e Bass Adjusts the bass level
58. nt 32 Lounge light 14 M menu add device 11 menu browse 11 menu channel list 11 menu home 10 menu language 26 menu options 11 menu setup 11 multimedia play files 20 mute TV speakers 13 N Net TV 8 Net TV clear history 16 Net TV zoom pages 16 O options menu 11 P PC network settings 27 PC network wired 27 PC connect 43 picture format 13 picture settings 23 position TV 6 power 49 R rear connectors 35 recycle 5 register product 4 remote control on screen 10 remote control overview 9 rename channels 24 reorder channels 24 S safety 4 Scenea enable 20 Scenea upload picture 20 screen care 5 settings assistant 23 settings picture 23 settings sound 24 shop mode 31 side connectors 36 EN 61 English sleeptimer 18 W smart card 46 smart picture 13 BER smart sound 13 software digital update 32 software Internet update 32 software version 32 sound settings 24 specifications 49 subtitle analogue 19 subtitle digital 19 subtitle language 26 subtitles language 19 T technical specifications 49 teletext 2 5 18 teletext digital text 18 teletext dual screen 17 teletext enable 17 teletext enlarge 17 teletext language 26 teletext menu 17 teletext search 18 teletext subpages 18 teletext Table Of Pages 17 U universa
59. re relaxed viewing experience and improved perceived picture quality Dim the lighting conditions in the room for the best Ambilight effect Caution To avoid bad infrared remote control reception place your devices out of sight of Ambilight 1 Press DIO Experience 2 Select Ambilight then press OK 3 To switch Ambilight on or off select On or Off You can also press on the TV to switch Ambilight on or off Set active mode Note Before you change the Ambilight active mode set Ambilight Colour to Active mode Ambilight active mode sets the speed at which Ambilight responds to on screen Images 1 Press 00 Experience 2 Select Active mode then press OK 3 Move the slider to set Ambilight responsiveness 4 Press O to exit the slider 5 Press OK to confirm your choice Use LoungeLight When the TV is on standby you can switch on Ambilight and create an Ambilight LoungeLight effect in your room During TV standby press on the side of the TV Note It may take more than 5 seconds for the LoungeLight to switch on To select another LoungeLight colour scheme see Use your TV gt Use Ambilight gt More Ambilight settings see NonPublish on page 15 More Ambilight settings In the Ambilight menu you can adjust more Ambilight settings While watching TV press fft gt Setup gt Advanced TV settings gt Ambilight Select a setting to adjust e Dynamic Sets
60. relessly via an optional wireless USB adapter Check with your local retailer for purchase details Internet AM Router The PC network feature is DLNA 1 5 certified You can use Microsoft Windows XP or Vista Intel Mac OSX or Linux on your computer To share PC content on your TV you need recent media server software on your computer Windows Media Player 11 or similar The media server software needs to be set to share files with your TV EM 29 English For a list of supported media server software read Technical data gt Multimedia see NonPublish on page 58 Note If the apparatus does not return to DLNA mode due to electrostatic discharge user intervention Is required Wired installation Connect the router to the TV using a network cable and switch on the router before you start the network installation To start the wired network installation close the user manual press fft gt Setup gt Connect to network and press OK Follow the instructions on screen to install the wired network The IV constantly searches for a network connection If asked agree to the End User Licence Agreement Find the latest End User Licence Agreement at http www philips com Network settings The TV s network settings that are used to connect to your router are standard and set to automatic This ensures easy connection with any available network If you have problems with the network connec
61. rge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need to use a Conditional Access Module to access content Check with your operator An e sticker banner displaying information appears on the TV display The IV is in Shop mode Remove the e sticker by setting the TV to Home mode then restarting the TV See Setup the TV gt Change other settings gt TV location Page 34 for more information Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected
62. rmed You can set the TV to add or remove digital channels automatically You can also manually start the channel update Automatic update To set the TV to update digital TV channels automatically leave the TV in standby mode Once a day the TV updates earlier found channels and stores new channels Empty channels are removed from the channel list If a channel update is performed a message appears at startup If you do not want this message to appear 1 Press fi 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Channel installation gt Channel update message gt Off then press OK To disable automatic updates 1 In the Channel installation menu select Channel update in standby gt Off then press OK Manual update Update channels yourself at any time using the manual update 1 In the Channel installation menu select Automatic installation then press OK 2 Start the update and select Update channels The update may take a few minutes Reinstall channels Automatic reinstall When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and install all available TV channels 1 Press fft 2 Select Setup gt Automatic channel search or Automatic satellite search then press OK Automatic satellite search is only available if the TV s
63. s Open the email on your PC and click the link to the registration form Complete the form and click the button to submit On the TV select OK and press OK to open the Net TV start page Parental control benefits With Parental control switched on e you can lock and unlock services and or categories of services e some services not suitable for children are locked from the start but can be unlocked e Only services on the Net TV pages can be locked Advertisements and open Internet websites cannot be locked e Services are locked per country Categones are locked for all countries Switch on parental control The first time you open the Net TV start page the TV asks you to switch on the Parental control If you switch on Parental control the TV asks you to enter a personal lock unlock code Enter a 4 digit code as the Net TV lock unlock code Use the number keys on the remote control Enter the same code again to confirm Browse Net TV Access the Net TV home page 1 Press OO Browse 2 Select Net TV then press OK The TV links up to Net TV and opens the start page Navigate the Net TV home page Press e LL to display the list of bookmarks or access an open Internet page e Navigation buttons to navigate Net IV or web pages Navigate the Net TV home page Press e to access the options menu e OK to view or select an item e to go back to a previous page o ft Home to exit Net TV and go back
64. s EasyLink enabled the following features are available One touch play When you play content from an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you connect your TV to an HDMI CEC compliant device pressing 6 on the TV remote control switches the TV and all connected HDMI devices to standby mode EN 49 English System audio control When you connect your TV to for example an HDMI CEC compliant Home Theatre System HTS your TV speakers automatically mute and audio from the TV plays through the HTS For more information about system audio control and other types of TV speaker configurations see Connect the TV Use Philips EasyLink gt TV speakers Page 51 EasyLink Remote Control FasyLink Remote Control allows you to control HDMI CEC compliant devices using your TV remote control To enable EasyLink Remote Control see Connect the TV gt Use Philips EasyLink gt Enable or disable EasyLink Remote Control Page 50 Pixel Plus Link Connected Philips EasyLink devices may apply their own picture quality processing to a video before streaming it to the TV This may interfere with the image processing of the TV Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices To enable Pixel Plus Link 1 Press ft 2 Select Setup gt Advanced TV settings gt EasyLink gt Pixel Plus link
65. ss OK 3 Select a channel then press OK to access the channel 4 Press O to exit the channel list without changing the channel Add your devices When you have connected a device to the TV always add this device as an item in the home menu With this item in the home menu you can easily switch the TV to this device In the home menu select Add your devices then press OK Follow the Instructions on screen to add the device to the home menu To remove a device from the home menu select the item press B and select Remove this device Press OK Setup Setup in the home menu allows you to change most of the TV settings including e Picture or sound settings e installation or update of TV channels e Update of TV software e Other special features Options Option menus offer convenient settings related to what is on screen 1 Press B to see what options are available 2 To exit press B again EN 12 Watch TV Switch on off or to standby To switch on Press the power switch 1 on the bottom of the TV To switch on from standby Press amp on the remote control 2 To switch to standby Press on the remote control To switch off Press the power switch on the bottom of the TV Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time switch off the TV using the power switch on the bottom of the set
66. structions on screen When the update is done the TV switches off and back on again automatically Wait for the TV to switch back on do not use the Power switch on the TV If the TV is connected to the Internet the TV displays a message about the availability of new software at start up With USB Before performing this procedure be sure to e Set aside some time to complete the entire update e Have available a USB storage device with at least 256MB of storage space e Have access to a computer with a USB port and internet access 1 Press ft 2 Select Setup gt Update software then press OK The update assistant starts Follow the on screen instructions to complete the update Note If you already have the upgrade file downloaded onto a USB storage device connect it to the TV Then select Setup gt Update software followed by Advanced software update gt Local updates With digital broadcast If available your TV can receive software updates via digital broadcasts If an update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted Reinstall the TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press fft 2 Select Setup gt Advanced TV settings 7 Reinstall TV then press OK 3 Follow the on screen instructions EN 35 English 5 Connect the T
67. te control to control playback of an online movie or to move up or down a web page 1 In Net TV press B 2 Select Show remote control then press OK 3 Use the Navigation buttons to move the slider up or down the page then press OK Enlarge a page 1 In Net TV press B 2 Select Zoom page then press OK 3 Select the action to perform then press OK Clear history 1 In Net TV press B 2 Select Clear Net TV memory then press OK Passwords cookies and other browsing history are removed from the TV EN 17 English 3 Use more of your IV Favourite channels Add or remove channels 1 Press LL 2 Select Channel list then press OK 3 Press B 4 Select Mark as favourite or Unmark as favourite then press OK A star appears in the channel grid indicating that the channel is added to the favourite list The star disappears if you remove the channel from the favourite list Select a favourite list View only channels in a favourite list or view all channels if a favourite list is currently selected 1 In the channel list press amp 2 Select Select list gt Favourites to display channels in a favourite list or All to display all channels 3 Press OK to confirm your choice Use EPG Overview The Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast
68. that you can watch directly on your TV See Use more of your TV gt Access Video store see NonPublish on page 20 Multimedia View or play your own multimedia files such as photos music and videos from the USB connection on the side of the TV or directly from your PC See Use more of your TV gt Access multimedia Access more information On screen You are reading the on screen user manual This manual contains all of the information you need to install and use this TV Access the user manual by selecting Help in the home menu Before carrying out instructions temporarily close the user manual by pressing the yellow button on the remote control Press the yellow button again to open the user manual at the same page EN 8 On the Internet A printable PDF version of this user manual is available on the Internet It contains the latest information and detailed feature explanations not covered in this on screen user manual Access the PDF as well as other product information including FAQs and firmware upgrades at http www philips com support 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators 1 3 Increases or decreases volume In home menu these buttons allow you to move horizontally 2 ft Accesses the home menu Press again to launch an activity in home menu 3 P CH Switches to th
69. the frequency and change it with the Navigation buttons Select Search to verify the frequency e _ If you receive the channel with DVB C the options Symbol rate mode and Symbol rate are available In Symbol rate mode select Automatic unless your cable provider supplies you with a specific symbol rate value Enter this supplied value in Symbol rate using the Numeric buttons Fine tune analogue channels If the reception of an analogue TV channel is poor try fine tuning the TV channel 1 Press fft 2 Select Setup gt Advanced TV settings or Advanced satellite settings gt Channel installation gt Manual installation gt Fine tune then press OK 3 Press A or v to fine tune the channel then select Done when complete 4 Select Store current channel to store the fine tuned channel using the current channel number or select Store as new channel to store it as a new channel number Change language settings Audio subtitle teletext languages Digital TV channels may stream several audio subtitle and teletext languages with a broadcast Set preferred languages when multiple languages are available 1 Press ft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Language gt Primary audio Primary subtitles Primary teletext 3 Select a language from the list then press OK 4 Press D to exit Tip Set a secondary language in
70. the same menu You receive this language if the primary language is unavailable Menu language 1 While watching TV press fft 2 Select Setup gt Advanced TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Set up a network Benefits PC network If the TV is connected to your PC network you can play photos music and movies from a computer or storage device in that network Once the network is installed select Browse PC in the home menu to view PC content Net TV If the TV is connected to the PC network which is connected to the Internet you can link up your TV to Net TV The Net TV start page offers you movies pictures music infotainment games and much more all set up for your TV screen Once the network is installed select Browse Net TV in the home menu to open the Net TV start page What you need WARNING This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable To connect the router to your TV we strongly recommend that you use an Fthernet cable that is shorter than 3 metres To connect the TV to a PC network and the Internet you need a router in your PC network Set the router to DHCP On Connect the router to the TV with a network Ethernet cable To enjoy Net TV connect the TV to a router with a high speed connection to the Internet You can also connect this TV to a PC network wi
71. tings to reduce energy consumption e Mute screen Turns off the TV display IMuting the screen saves energy if you just want to listen to audio from the TV e Light sensor To save energy the built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Audio lip sync Turn on digital audio lipsync to automatically sync the image on your TV to audio from a connected Home Theatre System 1 While watching TV press fft 2 Select Setup gt Advanced TV settings gt Preferences gt Audio Out delay gt On then press OK EN 33 English TV dock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press B 2 Select Clock then press OK The clock displays on the TV screen Note To disable the clock repeat the procedure Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving 1 While watching TV press fft 2 Select Setup gt Advanced TV settings gt Preferences gt Clock gt Auto clock mode gt Automatic Manual or Country dependent then press OK Enable or disable
72. tion you might want to adjust the settings so that they are appropriate for your home network If you are unsure ask someone with knowledge of network settings to help you To set specific network settings press gt Setup gt Advanced network settings and press OK EN 30 PC media server settings T Versity v 0 9 10 3 Microsoft Windows Enable media sharing In Microsoft Windows start T Versity Click the Settings tab and click the Start Sharing button I M Wer fce Mem vere trey vene x bed Geren 4 To vermeende No let De senem ino hs Pete Ue cabo met edem Of The umo laren Geen vos movi Poem P E pe saa a Anm Pho He mcs pest Amm s onset e ym er Pho he mt Rm m n bn 1 a Stamm rtt ataca ha ada chan He imet th Tech mro eden P Ampi of Ge voeem im um nun wem Pien beters OF mn fm Te It nternet en aste yos edi a on ad e fenes ef eoe ve Nun CePqeher cm Oe a nemo ow lernen Su ru HH aar t o d De t taion Ch ape Re Peas P ee ahy pia Sas a iei nt coma OPE vereen rur c Qe cm tar el tet Lus Them cmn vr em Denn mam images eo pven ag fare ions wale dom lune cotum ee m ade d mes m 9 mons rms om m UV rasy vem end av ares Per TTP EL beth bow d cm dermad sheers oe meee ted ex as Dun appe avi ur TI rper Pr ER de eras ef vre mda vien drm fhe mtg rug nh pe qe p du t DD pon A A pop up window tells you that the media server service is started Click
73. towards making environmental improvements during manufacturing including reduction of harmful substances promoting energy efficient use and providing information on end of use and product recycling EUROPEAN UNION ECOLABEL Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 Thanks to our environmental efforts this TV Is awarded the European Ecolabel Find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV at the Philips website for your country http www philips com Information on end of use To find out about the correct disposal of this TV and batteries see Get started gt Important gt End of use Page 4 EN 5 English Use a Kensington lock Your TV is equipped with a Kensington security slot on the bottom of the TV Purchase a Kensington anti theft lock not supplied to secure the TV Enjoy HD TV Full HD content This TV can display full High Definition HD video content To enjoy HD content you must connect to an HD source first otherwise the picture quality will be that of anormal TV Contact your dealer for more information on where to obtain HD video content in your country Alternatively visit http www philips com support for a list of HD channels or providers in your country Your TV can display HD video content from e a Blu ray disc player connected w
74. upports DVB S 3 Follow the on screen instructions to complete the channel installation When channel installation is complete Done is selected and a list of installed channels appears 4 Press OK Notes e During installation leave Settings unchanged unless your digital provider provides you with specific values to enter EM 27 English e When digital TV channels are found the list of installed channels may display empty channel numbers You can rename reorder or uninstall these channels Access DVB C or DVB T channels If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network 1 While watching TV press fft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Channel installation gt Antenna or Cable DVB gt Air terrestrial to access free to air DVB T channels or Cable to access DVB C channels 3 Press OK to confirm your choice 4 Press O to exit The TV switches to the selected network IManual reinstall This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct 1 While watching TV press ft 2 Select Setup gt Advanced channel settings or Advanced satellite settings gt Channel installation Analogue Manual installation gt System then press
75. y Tuner bands VHF UHF S Channel Hyperband Available on certain models only Display and sound Picture Display Display type LCD Full HD W UXGA Diagonal size 32 inch 81 cm 3 inch 94 cm 40 inch 102 cm 46 inch 117 cm Aspect ratio Widescreen 16 9 Panel resolution 1920 x 1080p 100 Hz e Pixel Precise HD picture enhancement e 1080p 24 25 30 50 60 Hz processing e 100 Hz LCD Sound e Output power RMS 20 W e _ Incredible Surround e Clear Sound e Dynamic Bass Enhancement e Mono Stereo NICAM Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60Hz 1360 x 768 60Hz 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 68 60 Hz 1360 x 768 60Hz Video formats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50 Hz 60 Hz 1080i 50 Hz 60 Hz 1080p 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz Multimedia Supported multimedia connections e USB FAT or DOS formatted Mass Storage Class compliant only e SD card slot EN 5 English Fthernet UTP5 Supported image files JPEG jpg ALB alb Supported audio video files e AVI video avi MPEG 4 SP MPEG 4 ASP e AVI audio avi MPEG Layer 2 3 AC3 e MPEG video mpg mpeg vob MPEG 1 MPEG 2
76. y of EasyLink buttons you can use with the TV remote control is available at Connect the TV gt Use Philips EasyLink gt EasyLink buttons Page 50 EasyLink buttons Control HDMI CEC compliant devices with the following buttons on the TV remote control e OK Starts pauses or resumes playback on the connected device Also activates a selection or accesses the menu of the device e le Previous Next Searches backwards and forwards on the connected device e Numeric buttons When EasyLink is enabled selects a title chapter or track e 3 Options Displays the menu of the connected device When fft is pressed the TV menu is displayed e Standby Press to enable one touch standby This switches the TV and the connected device to standby Other EasyLink buttons are available via On Screen Remote Control OSRC To access the OSRC 1 While watching a connected device press 3 2 Select Show remote control then press OK 3 Use the Navigation buttons and OK to select and use an on screen button 4 Press D to exit Configure TV speakers You usually connect the TV to an HDMI CEC compliant device such as a HTS using both an HDMI cable for video and a digital audio cable for audio You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant see Connect the TV Use Philips EasyLink gt Use HDMI ARC Configure TV speakers 1 Press fft
Download Pdf Manuals
Related Search
Related Contents
直角二面カンナ盤 LAP325 LAP425 取 扱 説 明 書 pHotoFlex pH Colorímetro portátil 取扱説明書(PDF:5.2MB) 486 WC - Elhvb.com Suspend-It 8850 Instructions / Assembly EDUCATION readdledocs-12-guide Bulletins pédiatriques - Faculté de médecine Copyright © All rights reserved.
Failed to retrieve file