Elite Screens Q100V
Contents
1. snap latch button UU UU UU Press Uo N 4 Folding the Projection Surface for Packing Please observe the following precautions before folding up the screen material 1 Do not bring the viewing surface into contact with chemical solvents sharp or abrasive objects painted varnished or plastic finished items See the cleaning instructions for exceptions to this 2 Make certain that the screen is laid out on a dry clean and flat surface Folding up the screen Lay out the screen with the viewing surface facing up and cover it with flat not crumpled tissue or packing paper that is clean and unprinted Note Do not ever use abrasive paper newspaper or any printed material on your projection screen 1 With the viewing surface facing up fold the fabric in half from top to bottom When folding make certain that the viewing surface does not come into contact with the black binding grommets or snap buttons Note The screens are shipped from production with tissue paper in the folds that should be retained for future use 2 Itis preferable to make sure that the first folds never exceed 3 feet in width fold again if necessary Also make sure that there is always clean packing paper in between the two surfaces 3 Larger sized screens will need to be folded with more frequency than smaller screens Follow the instructions from step 1 as well 4 Fold the material f2. ty Lock down the corners N fig 8 Snap latch UUUUUUUUU O10203000000000000 Following steps 1 2 3 below use caution during attachment 1 O unfold O0 2U3000000U0U00U00U0U0U HHUUUUUU Fig2 3 adjust the height of the frame and then tighten the connection f i Screws ol i 00 unfold m UU Connection screws i Po O removable frame 0O 20 nRT EN OO unfold locking bolt nap latch EAN Adjusting screws Lock down the corners oi 2 Be A pa a pee we a a BE a Pe ware A f 7 A A p P e a as a T A Ze a ae a Be Nr ail A gi p A a a i p set a mS wae oe a ge E ee A sla Attaching the Frame to its Supports Always use at least two locking bolts through the T Leg Support the Spacer and into the Frame on each side 2 Height can be adjusted in 8 increments up or down Normal screen height is 44 from the bottom of the frame to the floor 3 Reverse this process to dismantle and pack away the screen ocki ng bol t frame leg
3. e All shipping damages must be reported with in 7 business days upon receipt of the product After 7 days the Customer is responsible for all incurred costs e Inspect all shipments upon arrival If damage or loss is apparent upon delivery do not accept the shipment until you make a notation of the damage on all copies of the carrier s delivery receipt and have the driver sign all copies to acknowledge the notation Do not sign a receipt for damaged or missing cartons or there will be no basis for a claim Ask the carrier to make a detailed inspection of the damage File a claim with the carrier Cooperate and follow up as necessary to secure final settlement e Immediately advise Elite Screens of all damages or problems Do not return merchandise to Elite Screens File your claim with the carrier and enclose copies of the bill of lading signed by the driver and inspection report as support Keep all packing materials and boxes with the damaged product Do not throw anything away Although Elite Screens will provide any assistance possible we cannot be responsible for the actual filing of claims on the carrier or accept liability for non collectable freight claims For Warranty and Service requests please fill out a RMA Service Form at www elitescreens com help html Please visit this link for full Warranty information www elitescreens com services html For Customer Service and Technical questions please contact Elite Screens at Te
4. Registration elitescreens com For any technical inquiries please email to techsupport elitescreens com or call 877 511 1211 Required Field 562 483 8198 Ext 313 234 202 www elitescreens com
5. Folding Presentation Screen QuickStand Series Users Guide setup Procedure The frame and supports are made of 1 3 8 aluminum tubing with an anodized finish Please follow the instructions in this package With proper care your QuickFold screen will provide many years of reliable service Two Section Frame For presentation screens that are less than 120 in diagonal measurement 1 Take the frame out of the case and remove its wrappings Unfold the main joints as shown in fig 1 2 Once the main joints are unfolded make sure that the snap latches click into the locked position The frame should now be fully elongated as in fig2 Note The snap latches will automatically lock when the joint is straightened Press the snap latch button in order to release the lock 3 While holding the bottom of the frame in place lift the top of the frame to unfold the sides which will cause the snap latches lock when fully extended Secure the corner braces into the locked position The screen frame should now be fully opened as in fig 3 Snap latch Snap latch Lock down the corners fig 3 Three Section Frame For large presentation screens that are 120 or more in diagonal measurement 1 Take the frame out of the case a
6. e screen with hard or sharp objects 4 Please use a clean cotton cloth or soft dust brush to remove any dust particles on the screen 5 The screen material may be cleaned but care is required to avoid damage S and Canada Warranty Policy Two 2 year warranty parts and labor from purchase date as follows except for refurbished units as specified below e Refurbished units carry a 90 day parts and labor warranty e Demo units or open box items are AS IS items and do not carry a warranty e Each party will be responsible for one way shipping during the warranty period e DOA Defective On Arrival Must be reported within 7 business days of receipt A RMA Return Merchandise Authorization number must be issued in order to process a replacement Elite Screens will replace the DOA Defective On Arrival unit with a brand new replacement see exceptions below after the DOA unit is received and or confirmed defective Once the product is received Elite Screens will send out a new unit to the customer by ground service subject to inventory availability Should a problem be reported after the 7 day grace period the item must be shipped to us for warranty repair e Missing Parts must be reported within the 7 day DOA grace period If reported after 7 days customer will be only be responsible for shipping and handling fees If reported after 30 days of receipt customer is responsible for cost of the parts and shipping amp handling fees
7. lephone 562 483 8198 Fax 562 483 8498 REMEMBER TO REGISTER YOUR WARRANTY AT WWW ELITESCREENS COM REGISTER HTM US amp Canada Tech Support amp Warranty Claim Please contact us at service elitescreens com or call 1 877 511 1211 8 Service Europe Tech Support amp Warranty Claim Please contact us at service elitescreens eu or call 49 0 40 30392958 Asia Tech Support amp Warranty Claim Please contact us at service elitescreens com cn or call 86 0 755 8461 7989 America Elite Screens Inc 16410 M anning Way Cerritos CA 90703 USA Tel 877 511 1211 Fax 562 483 8498 info elitescreens com www elitescreens com Asia Elite Screens China Ltd Longxi Duimianling Industry Zone Longcheng Longgang District ShenZhen GuangDong China Tel 86 0 755 8461 7989 Fax 86 0 755 8461 7669 info elitescreens com cn www elitescreens com cn Taiwan Elite Screens Taiwan Corp info elitescreens com tw www elitscreens com tw Europe Elite Screens GmbH Elite Screens Europe GmbH L becker Stra e 1 22087 Hamburg Germany Tel 49 40 30392494 Fax 49 40 49219200 info elitescreens eu www elitescreens eu Latin America Contact erik garcia elitescreens com East Asia Contact info ea elitescreens com India Contact info india elitescreens com Japan Contact info japan elitescreens com If you have pictures of your screen you d like to share with us please email your pictures to
8. nd remove its wrappings Unfoldthe main joints making sure that both the end and middle spans are in prefect alignment as shown in fig 4 2 Make sure that the snap latches have locked the joints in the frame so that it is at its full horizontal extension as shown in fig 5 3 While holding the bottom of the frame in place lift the top of the frame to unfold the sides which will cause the snap latches lock when fully extended Secure the corner braces into the locked position The screen frame should now be fully opened as in fig 6 fig 4 fig 5 Snap latch Snap latch Lock down the corners fig 6 Standard T Leg Support 1 Take the T Leg out of the case and remove its wrappings Fold down the support legs as shown in fig 7 2 Secure the corner braces into the locked position as shown in fig 8 3 Unfold the T Leg s main support until the snap latches click into the locked position as in fig 9
9. rom top to bottom first then alternate in folding left to right until the material is of a sufficient size that will fit into the leatherette case Note Keep the screen material inside its case when not in use It will help protect the material from damage Cleaning The screen surface can be cleaned as follows Use a clean white cloth 100 cotton preferred and dampen it with clear purified water Gently wipe in one direction and NOT in a circular motion Use another dry cloth to dry after each cleaning session To remove a stubborn stain or sticky surface use denatured alcohol methanol or methyl alcohol in lieu of water Attaching the Screen once it is unpacked 1 Use the snap buttons to connect the Screen material with the frame 2 Start at the top working in whatever direction is most comfortable to you 3 Stretch the corners if necessary to pair up the buttons with their corresponding snaps Packing List Frame 1 piece Support T Legs 2 pieces ATI Legs 2 pieces optional depending on size SAT Legs 2 pieces optional depending on size Screen Fabric 1 2 pieces Locking Bolt 6 26 pieces Frame Spacer 6 26 pieces a ey et ae ae SS Manual 1 piece The following points should be noted to assure satisfactory performance and longevity of your screen 1 Never use your exposed hand to touch the screen surface because of grease from the skin 2 Never scrabble on the screen with anything 3 Don t touch th
Download Pdf Manuals
Related Search