IBM 46M0832
Contents
1. ServeRAID M1000 Series Advanced Feature Key Quick Install Guide Thank you for purchasing the ServeRAID M1000 Series Advanced Feature Key The ServeRAID M1000 Series Advanced Feature Key enables support for RAID 5 configurations and self encrypting disks SED on the ServeRAID M1015 SAS SATA controller The ServeRAID M1000 Series Advanced Feature Key mounts directly to the controller using the J1 2 pin connector Figure 1 shows the Advanced Feature Key Figure 1 Advanced Feature Key UY Please take a few minutes to read this Quick Install Guide If you need more information about any topic covered in this guide refer to the documents on your ServeRAID M Support CD 85060 00 Attention It is important to back up any data before you make a change in system configuration Failure to do this could result in data loss INSTALLING THE SERVERAID M1000 SERIES ADVANCED FEATURE KEY ON THE SERVERAID M1015 SAS SATA CONTROLLER Perform the following procedures to install the ServeRAID M1000 Series Advanced Feature Key directly to the ServeRAID M1015 SAS SATA controller Step 1 Turn off the computer and unplug the power cords from the rear of the power supply Step 2 Remove the cover from the computer according to the instructions in the system user s manual so you can access the controller Attention When handling static sensitive devices take precautions to avoid damage from static electricity2. Step 3 Ground yourself before you touch the controller or the Advanced Feature Key Step 4 Step 5 Step 6 Figure 2 Step 7 yet Remove the Advanced Feature Key from the package Hold the Advanced Feature Key so that the J1 connector is up and the connector lines up with the U1 header on the controller as shown in Figure 2 Insert the J1 connector into the U1 header so that the two connectors are firmly joined Installing the ServeRAID M1000 Series Advanced Feature Key on ServeRAID M1015 SAS SATA Controller Turn on the Power to the Computer Reinstall the computer cover and reconnect the power cords Turn on the power to the computer making sure that the power is turned on to the SAS devices and the SATA II devices before or at the same time as the host computer If the power is turned on to the computer before it is turned on to the devices the computer might not recognize the devices TECHNICAL SUPPORT See the Important Notices and Warranty Information document for information about the technical support available for this product tl IBM P N 498629 First Edition September 2009 Copyright International Business Machines Corporation 2009 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp IBM and the IBM logo are trademarks or registered trademarks of Inter
3. national Business Machines Corporation in the United States other countries or both LSI the LSI logo design and MyStorage are trademarks or registered trademarks of LSI Corporation All other brand and product names may be trademarks of their respective companies
Download Pdf Manuals
Related Search