Tripp Lite BP48V60-3UNAFTA rechargeable battery
Contents
1. the others connect an input output plug on the second battery pack to an input output plug on the first a plug on third to a plug on the second and so on Note that multiple battery pack arrays will provide longer runtimes but will also require longer recharge times Maintenance Battery packs require no maintenance but should be kept dry at all times Avoid installation in locations with high heat and or humidity The battery packs should be kept fully charged by being connected to an active UPS system not left in a depleted condition Batteries left in a discharged state will suffer a permanent loss of capacity Troubleshooting There is a fuse array inside the battery packs If a heavy overload or short circuit is encountered a fuse will open blow A battery pack with a blown fuse will deliver no output voltage at any load A qualified technician must replace the fuses Contact Tripp Lite Customer Support for additional information Internal Battery Replacement The batteries in the battery packs will eventually wear out and be unable to provide adequate backup times The batteries should only be replaced by factory authorized service personnel Tripp Lite offers an exchange program for North American customers wherein they may exchange worn out battery packs for new ones at a price comparable to the cost of individual battery replacement For more details call Tripp Lite at 773 869 1234 Storage Disconnect your battery pack2. DP BP Series External Battery Packs Not suitable for mobile applications IT gt INTE 1 TT gt y TN IN gt Y Warranty amp Warranty Registration 1 Espa ol Francais Pycckum TRIPP LITE POWER PROTECTION 1111 W 35th Street Chicago IL 60609 USA Customer Support 773 869 1234 www tripplite com Copyright 2008 Tripp Lite All rights reserved 15 22 Introduction Tripp Lite BP Series External Battery Packs are designed for use with various Tripp Lite UPS systems equipped with external battery pack connectors Important Safety Instructions Save These Instructions WARNING The mounting shelves are not intended to support more than one battery pack Do not stack multiple battery packs on a single set of mounting shelves Failure to follow this warning may lead to product damage and or a risk of personal bodily harm Use caution when lifting battery packs Because of the considerable weight of all battery packs at least two people should assist in lifting and installing them Make certain that your battery packs and UPS use the same DC voltage before connecting them Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signifi cantly affect its safety or effectiveness is not recommended Do not use this equipment in the presence of a flammable anesthetic mixture
3. s power cable before storing If you plan to store your battery pack for an extended period of time fully recharge its batteries every three months by connecting it to a UPS that is connected to AC input for at least 12 hours Service Before returning your battery pack for service follow these steps 1 Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions 2 If the problem continues do not contact or return the battery pack to the dealer Instead call Tripp Lite at 773 869 1233 A service technician will ask for the battery pack s model number serial number and purchase date and will attempt to correct the problem over the phone 3 If the problem requires service the technician will issue you a Returned Material Authorization RMA number which is required for service If you require packaging the technician can arrange to send you proper packaging Securely pack the battery pack to avoid damage during shipping Do not use Styrofoam beads for packaging Any damages direct indirect special incidental or consequential to the battery pack incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty Battery packs shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid Mark the RMA number on the outside of the package If the bat
4. may be ordered separately from Tripp Lite Refer to the illustrations below for specific installation instructions covering 2U 3U and 4U battery packs Important Illustrations show the most typical installation configurations your model may vary Use only the pre drilled screw holes to attach mounting brackets to the sides of the battery pack When installing battery packs into the rack ensure that the weight of the unit is evenly distributed Connection KH Select battery packs have a polarized plug on an output cord permanently connected to the rear panel Simply plug the output cord directly into the external battery connector of your UPS See your UPS manual for external battery connector description and location Note that only one of these battery packs is generally connected to a UPS at one time For longer runtime use one or more Tripp Lite Battery Packs with daisy chain capability B select battery packs feature dual input output receptacles on their rear panels El To connect to a UPS insert one end of the detachable power cable into either plug on the rear of the battery pack and the cable s other end into the external battery connector of your UPS See your UPS manual for external battery connector description and location To connect multiple battery packs to a single UPS for greatly increased runtime connect the output of the first battery pack to the UPS s external battery connector then daisy chain
5. service center Customers in Canada may obtain service under this Warranty only by delivering or shipping the product with all shipping or delivery charges prepaid to an authorized service center Canadian customers may visit Tripp Lite s web page www tripplite com to find the address and telephone number of the nearest authorized service center THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT MISUSE ABUSE OR NEGLECT SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ALL IMPLIED WARRANTIES INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental or conse quential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may have other rights which vary from jurisdiction to jurisdiction Tripp Lite 1111 W 35th Street Chicago IL 60609 WARNING The individual user should take care to determine prior to use whether this device is suitable adequate or safe for the use intended Since individual applications are subject to great variation the manufacturer mak
6. es no representation or warranty as to the suitability or fitness of these devices for any specific application WARRANTY REGISTRATION Visit www tripplite com warranty today to register the warranty for your new Tripp Lite product You ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product No purchase necessary Void where prohibited Some restrictions apply See website for details Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification your Tripp Lite product has been assigned a unique series number The series num ber can be found on the product nameplate label along with all required approval markings and information When requesting compliance information for this product always refer to the series number The series number should not be confused with the marking name or model number of the product Tripp Lite follows a policy of continuous improvement Product specifications are subject to change without notice Made in China TRIPP LITE 1111 W 35th Street Chicago IL 60609 USA 773 869 1234 USA 773 869 1212 International www tripplite com 200801218 93 2487_EN
7. ion contact the manufacturer of your rack or rack enclosure The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications 4 Post Mounting Most external battery packs include the hardware required for 4 post mounting If this hardware did not come with your unit an Adjustable 4 Post Rackmount Shelf Kit Model UPSRMRII may be ordered separately from Tripp Lite Connect the two segments of each shelf IN using the included screws and nuts El Leave the screws slightly loose so that the shelves can be adjusted in the next step Aa Adjust each shelf to fit your rack then mount them in the lowest available space of your rack with the screws nuts and washers provided EJ Note that the support ledges should face inward Tighten the screws that connect the shelf segments D El Attach mounting ears to the front mounting holes of your equipment Bl using the screws pro vided B The ears should face forward Using an assistant if necessary lift your equipment and slide it onto the mounting shelves Attach your equipment to the rack by using the appropriate hardware B through its mounting ears and into the rack rails Mounting Rack continued 2 Post Telecom Mounting Select external battery pack models include the hardware required for 2 post mounting If this hardware did not come with your unit a 2 Post Rackmount Installation Kit Model 2POSTRMKITWM
8. tery pack is within the 2 year warranty period enclose a copy of your sales receipt Return the battery pack for service using an insured carrier to the address given to you by the Tripp Lite service technician 2 Year Limited Warranty Seller warrants this product if used in accordance with all applicable instructions to be free from original defects in material and workmanship for a period of 2 years from the date of initial purchase If the product should prove defective in material or workmanship within that period Seller will repair or replace the product in its sole discretion Customers in the United States may obtain service under this Warranty only by delivering or shipping the product with all shipping or delivery charges prepaid to Tripp Lite 1111 W 35th Street Chicago IL 60609 Seller will pay return shipping charges Call Tripp Lite at 773 869 1234 before sending any equipment back for repair Customers in Mexico may obtain service under this Warranty only by delivering or shipping the product with all shipping or delivery charges prepaid to an authorized service center In Mexico City the authorized service center is Q Plus Mexico shipping address Avenidac Oyoacan 981 29 Col de Valle Mexico City call Q Plus at 5 559 3022 before sending any equipment back for repair Customers elsewhere in Mexico may visit Tripp Lite s web page www trip plite com to find the address and telephone number of the nearest authorized
9. with air oxygen or nitrous oxide e Suggested mounting procedures are for common rack types and may not be appropriate for all rack configurations User must determine the fitness of rack and wallmount hardware and procedures before mounting When connecting multiple battery packs to a single UPS the battery packs should be approximately the same age It is normal for sparks to occur when connecting external batteries Do not unplug external batteries from the UPS while the UPS is operating on battery power due to the possibility of dangerous arcing e Batteries can present a risk of electrical shock and burn from high short circuit current Observe proper precautions Do not dispose of the battery packs in a fire Do not open the battery packs there are no user serviceable parts inside Do not short or bridge the battery terminals with any object Unplug and turn off the UPS before performing battery pack replacement Use tools with insulated handles The battery packs are recyclable Refer to your local codes for disposal requirements or in the USA only call 1 800 SAV LEAD or 1 800 8 BATTERY 1 800 822 8837 or visit www rbrc com for recycling information Mounting Rack Mount your rackmount battery pack in either a 4 post or 2 post rack or rack enclosure see next page for 2 post mounting The user must determine the fitness of hardware and procedures before mounting If hardware and procedures are not suitable for your applicat
Download Pdf Manuals
Related Search