Philips HTS3377W DVD home theater system
Contents
1. GE U 1 Connect the speakers and subwoofer to the matching jacks on the Home Theater System Note e Ensure that the colors of the plugs and jacks are matched Connect rear speakers to wireless receiver For the rear speakers of HTS3377W only REAR REAR LEFT RIGHT AC MAINS REAR REAR RIGHT LEFT 1 Connect the rear left and right speakers to the matching jacks at the bottom of the wireless receiver Connect radio antenna 1 Connect the FM antenna to the FM75Q jack on this Home Theater System for some models this cable is already connected the wall Tip Extend the FM antenna and fix its ends to e For better FM stereo reception connect to an external FM antenna EN 15 English Connect Connect audio cables other Connect audio from cable box devices recorder game console You can choose to connect to analog or digital Route the audio from other devices to this jack depending on the device capabilities Home Theater System to enjoy audio play with multi channel surround capabilities Connect to analog jacks Connect audio from TV also used for EasyLink control 1 Connect the audio cables not supplied to the AUDIO IN AUX jacks on the Home Theater System and the AUDIO 1 Connect the audio cables not supplied output jacks on the device to the AUDIO IN AUX jacks2. e To stop play press or remove the USB device Note e Ifthe device does not fit into the USB jack connect it through a USB extension cable e If you connect a multiple USB card device reader only one card device can be accessed EN 31 English Play Play from portable media player Simply connect your portable media player e g MP3 player to this Home Theater System to enjoy superb sound quality from your music collections g 1 Connect a 3 5mm stereo audio cable not supplied from the MP3 LINK jack on this Home Theater System to the headphone jack on the portable media player 2 Press AUDIO SOURCE repeatedly until MP3 LINK is displayed 3 Start play on your portable media player e To stop play press STOP on the portable media player Note e Control playback is only possible on the portable media player e Stop play on the portable media player before you switch to other play media source 32 EN Play from radio Check if the FM antenna has been connected to this Home Theater System If not connect the supplied FM antenna to the FM75 Q jack and fix its ends to the wall e For better FM stereo reception connect an external FM antenna not supplied e Position the antenna as far away as possible from your TV VCR or other radiation source to prevent interference First time tuning When you access to radio m
3. Note See the explanations of the above options in the following pages EasyLink Setup If this Home Theater System is connected to HDMI CEC compliant TV devices all connected devices can respond to the following commands simultaneously Option Description EasyLink Turns off or on all EasyLink features To disable this feature select Off One When you press PLAY the Touch TV and Home Theater System Play are turned on Disc play starts if there is a disc in the Home Theater System To disable this feature select Off One If you press and hold STANDBY Touch Standby for at least 3 seconds the Home Theatre System and all the HDMI CEC devices switch to standby simultaneously To disable this feature select Off When you play audio that is routed from the connected devices this Home Theater System switches to the corresponding audio source automatically To enable this feature select On Then proceed to Audio Input Mapping to scan and map all the connected devices System Audio Control Audio When you map the audio Input input correctly this Home Mapping Theater System switches to the audio from the played device automatically Note e You must turn on the HDMI CEC operations on the TV devices before you can enjoy the EasyLink controls See the TV devices manual for details e Philips does not guarantee 100 interoperability with all HDMI CEC compliant dev
4. Play music Control audio track play 1 Play a track 2 Use the remote control to control the track Button Action gt Il Starts pauses or resumes disc play u Stops disc play gt i Skips to the next track 4 Skips to the beginning of the current track Press twice to jump to the previous track Ol Selects an item to play Co lt lt gt gt Searches fast forward right or fast backward left Press repeatedly to change the search speed REPEAT Selects or turns off repeat or shuffle mode Play MP3 WMA music MP3 WMA is a type of highly compressed audio file files with mp3 or wma extensions 1 Insert a disc or USB that contains the MP3 WMA music 2 Press DISC or USB L gt A contents menu is displayed Select a folder then press OK 3 A Select a track to play then press H e To return to the main menu press D BACK or press until Previous folder is selected then press OK e For disc recorded in multiple sessions only the first session is played e This Home Theater System does not support MP3PRO audio format e If any special characters are present in the MP3 track name ID3 or album name it might not be displayed correctly on the screen because these characters are not supported e Some WMA files are protected by Digital Rights Management and cannot be played on this Home Theater System e Folders files that exceed the supported limit of this Home Theater System will
5. than JPEG or sound clips associated with pictures e Folders files that exceed the supported limit of this Home Theater System are not displayed or played Control photo play 1 Play photo slideshow 2 Use the remote control to control the photo Button Action Skips to the previous photo gt Skips to the next photo A Rotates the photo clockwise v Rotates the photo anti clockwise ZOOM Zooms in or out of the picture Play pause in zoom mode E Stops play Play musical slideshow Play MP3 WMA music files and JPEG photo files simultaneously to create musical slideshow The MP3 WMA and JPEG files must be stored on the same disc or USB device 1 Play MP3 WMA music 2 Navigate to the photo folder album and press OK to start slideshow play L gt Slideshow begins and continues till the end of the photo folder or album L gt Audio continues to play till the end of the disc e To stop slideshow play press e To stop music play press M again Play from USB device This Home Theater System plays views MP3 WMA Divx Ultra or JPEG files on the following USB devices e digital camera that complies with the PTP standard e flash drive e memory card reader e HDD external power source needed o 1 Connect a USB device to the USB jack 2 Press USB L gt A contents menu is displayed 3 Select a file to play then press H t gt Play starts
6. Left Front Right Center Subwoofer Rear Left Rear Right 2 Press lt gt to change the volume level then press OK L gt The test tone is emitted from the speaker e Repeat the above setting for other speakers until all the speakers output level sounds equally balance e To exit the menu press SETUP To set the output delay time center and rear speakers only 1 Select Speakers Delay in the menu then press P Speakers Distance Setup Co ows Cc ows Cc ows Center Rear Left Rear Right 2 Press gt to set the delay time then press OK e Repeat the above setting for other speakers until the sound output from different speakers reach the listening position at the same time e To exit the menu press amp SETUP Tip e Seta longer delay time if the center speaker or rear speaker is closer to the listening position than the front speaker e Allow Ims setting for every 1 foot distance between the speaker and the listening position EN 21 English Get started Use Philips EasyLink Your Home Theater System supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices Turn on the HDMI CEC operations on the TV and other co
7. connected and press the correct input source for example AUDIO SOURCE USB to select the device you want to play No sound on HDMI connection e Sound cannot transmit through HDMI connection if the connected device is non HDCP compliant or only DVI compatible Make an analog or digital audio connection e Ensure that the HDMI Audio setting is turned on EN 47 English Troubleshooting No sound from TV program e Connect an audio cable from the AUDIO input on this Home Theater System to the AUDIO output on your TV Then press AUDIO SOURCE repeatedly to select the corresponding audio input source No surround sound effect from the speakers e Press SURR to select a correct surround sound setting e Ensure that the source you are playing is recorded or broadcast in surround sound Dolby Digital etc Sound cannot transmit through HDMI connection if the connected device is non HDCP compliant or only DVI compatible Make an analog or digital audio connection Play DivX video files cannot be played e Ensure that the DivX file is encoded according to the Home Theater Profile with the DivX encoder e Ensure that the DivX video file is complete The aspect ratio of the screen is not aligned with the TV display setting e The aspect ratio is fixed on the disc 48 EN DivX subtitle does not display correctly e Ensure that the subtitle file name is the same as the movie file
8. disc information You can change the video play options here without interrupting disc play Fits the picture format to the TV screen You can watch the movie in full screen on TV Note e Some operations may not work with some discs See the information accompanying the disc for details 26 EN Access DVD menu DISC BACK mi AINA Press DISC to access disc main menu Select a play option then press OK e In some menus press the Numeric buttons to input your selection e To return to the title menu during play press gt BACK Access VCD menu or preview menu The PBC Playback Control for VCD is activated by default in the factory When you load in a VCD the contents menu is displayed 1 Press av to select a play option then press OK to start play e If PBC is off it skips the menu and starts play from the first title e To return to the menu during play press 9 BACK only possible if the PBC mode is on 2 Press DISC to preview the contents of the disc e To exit the menu press DISC Select Digest Type Track Digest Disc Interval Track Interval 3 Selecta preview play option then press OK Track Digest Plays the first few seconds of each track in a disc Disc Interval Divides the total disc time by six and play the first few seconds of these intervals Track Interval Divides the current track by six and play the first few seconds of these inte
9. not be displayed or played Tip e You can select the display of data contents view folders or files see Adjust settings gt Preferences gt MP3 JPEG Display EN 29 English Play Play photo Play photo as slideshow This Home Theater System can play JPEG photos files with jpeg or jpg extensions 1 Insert a disc or USB that contains the JPEG photos 2 Press DISC or USB L gt Slideshow begins for Kodak disc or a contents menu for JPEG disc is displayed 3 Select the folder album you want to play e To preview the photos in the folder album press INFO Id gt Pl e To go to previous or next screen display press M Pl e To select a photo press the Navigation buttons e To display the selected photo only press OK 4 Press gt I to start slideshow play e To return to the menu press gt BACK 30 EN e You may require longer time to display the disc content on the TV due to the large number of songs photos compiled onto one disc e Ifthe JPEG photo is not recorded with an exif type file the actual thumbnail picture is not be shown on the display It is replaced by a blue mountain thumbnail picture e This Home Theater System can only display digital camera pictures according to the JPEG EXIF format typically used by almost all digital cameras It cannot display Motion JPEG and pictures in formats other
10. or password protected USB Default setting is 128kbps devices cannot be used to store MP3 files CREATE MP3 OPTIONS Speed Normal O Track01 Bitrate 128kbps O Track02 O Track03 O Track04 O Track05 SUMMARY O Track06 Select Track 0 O Track07 Time 00 00 Select All Deselect All Insert an audio CD CDDA HDCD Connect the USB flash drive to lt gt USB jack on this Home Theater System During disc play press CREATE MP3 Select the conversion options in the OPTIONS panel then press OK Press to access the TRACK panel mm AW N 34 EN 7 Adjust sound Control the volume d Press VOL to increase or decrease the volume e To mute press amp e To restore the volume press X again or press VOL Select surround sound m 1 Press SURR repeatedly to select the best surround output that s available on the QQ disc Option Description 5 CH Enhances the stereo channel STEREO output by duplicating the sound output to the center and rear speakers Ideal for party music MULTI Multi channel surround CHANNEL output DTS Digital Theater DPLII Systems Dolby Digital and Dolby Pro Logic Il STEREO Stereo sound from two front speakers Select a preset sound SOUND 1 Press SOUND repeatedly to select the sound effect that most suitable for the video or music you play ACTION ROCK CONCERT CLASSIC DRAMA JAZZ SPORTS N
11. sound Adjust settings General setup Audio setup Video setup Preferences Additional Information Update software Care 10 Specifications 11 Troubleshooting 12 Glossary 1 Important 4 Safety and important notice 4 Trademark notice 5 2 Your Home Theater System 7 Feature highlights 7 Product overview 8 3 Connect 11 Place the Home Theater System 11 Connect video cables 12 Connect speaker cables to speakers 13 Connect speaker to speaker stand 13 Connect speakers and subwoofer 14 Connect rear speakers to wireless receiver 15 Connect radio antenna 15 Connect audio cables other devices 16 Connect power cord 18 4 Get started 19 Insert the remote control batteries 19 Find the correct viewing channel 20 Select menu display language 20 Change speaker settings 21 Use Philips EasyLink 22 Select a play source 24 5 Play 25 Play a disc 25 Play video 25 Play music 29 Play photo 30 Play from USB device 31 Play from portable media player 32 Play from radio 32 EN 34 34 35 35 29 35 36 36 38 40 42 44 44 44 45 47 49 English Contents 1 Important Safety and important notice WN Warning e Risk of overheating Never install the Home Theater System in a confined space Always leave a space of at least 4 inches around the Home Theater System for ventilation Ensure curtains or other objects never cover the ventilation slots on the Home Theater System e Never place the Home Theater S
12. supply voltage corresponds to the voltage printed on the back or the underside of the Home Theater System e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until MP3 LINK is displayed on the display panel Connect USB device 1 Connect the USB device to USB jack on this Home Theater System Note e This Home Theater System can only play view MP3 WMA DivX Ultra or JPEG files that are stored on such devices e Press USB to access the content and play the files 18 EN Connect the power cords from the Home Theater System wireless receiver and other devices to the power outlets when all the required connections are done L gt The wireless indicator on the wireless receiver light up Only applicable for HTS3377W L gt The Home Theater System is ready to be set up for use lt P WIRELESS a Note e For optimum wireless reception ensure that the wireless receiver is not obstructed by any objects 4 Get started Insert the remote control batteries 3 Slide the battery cover off the back of the remote control Insert the 2 supplied batteries AAA Be sure the and ends of the batteries line up with the markings inside the case Slide the cover back into position Control a play source 1 Press RADIO USB or DISC button to select the source you wish to control
13. the menu Go to www philips com support to check the latest software version available for this Home Theater System Rh WwW N 5 Ifthe latest software version is higher than the software version of this Home Theater System download it and store onto a CD R or USB flash drive 6 Insert the CD R or USB flash drive to this Home Theater System 7 Press DISC or USB then follow the instruction on the TV to confirm update operation L gt Once software update is complete this Home Theater System turns off to standby automatically 44 EN Note e Do not remove the CD R or USB when software updating is in progress 8 Disconnect the power cord for a few seconds and connect again to reboot the system Care Caution e Never use solvents such as benzene thinner cleaners available commercially or anti static sprays intended for discs Clean discs Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement Clean main unit screen Wipe the screen surface with a micro fibre cleaning cloth 10 Specifications Note e Specification and design are subject to change without notice Playback media e DVD Video DVD R RW DVD R RW DVD R DL CD R CD RW Audio CD Video CD SVCD Picture CD MP3 CD WMA CD Divx lt CD USB flash drive Amplifier e Total output power e For HTS3270 420 W RMS 2 X 100 4 X 55 For HTS3377 1000 W R
14. the video output see Adjust settings gt Video setup gt HDMI Setup e This type of connection provides the best picture quality Option 3 Connect to the Video CVBS jack VIDEO VIDEO OUT 1 Connect a composite video cable not supplied to the VIDEO jack on this Home Theater System and the VIDEO input jack on the TV Note e The video input jack on the TV might be labeled as A V IN VIDEO IN COMPOSITE or BASEBAND e This type of connection provides standard picture quality Connect speaker cables to speakers For the rear speakers of HTS3377 and HTS3377W only 0 1 Connect the speaker cables to the matching color jacks on the speakers or speaker stands Connect speaker to speaker stand For the rear speakers of HTS3377 and HTS3377W only Attach the speakers to the speaker stands and secure the position with screws EN 13 English Connect Connect speakers and subwoofer For HTS3377W only SPEAKERS FRONT FRONT FRONT REAR REAR SUB RIGHT LEFT CENTER RIGHT LEFT WOOFER FRONT FRONT LEFT RIGHT So Lf ii il AA RU 14 EN For HTS3270 and HTS3377 HTS3270 has a different set of speakers CoO oeg SPEAKERS FRONT FRONT FRONT REAR RIGHT LEFT CENTER RIGHT SUBWOOFER REAR SUB LEFT WOOFER FRONT REAR REAR CENTER LEFT RIGHT FRONT FRONT LEFT RIGHT DdD d
15. 2 Select the desired function for example 4 Pl Navigate through the menu X Point the remote control directly at the remote sensor on the Home Theater System and select the desired function N Press the following buttons on the remote control to navigate through the on screen menus Do not mix batteries old and new or carbon and alkaline etc Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed off properly Button Action AV Move up or down lt gt Move left or right OK Confirm a selection GI I3 Enter numbers Co EN 19 English Get started Find the correct viewing channel 1 Press to turn on the Home Theater System 2 Press DISC to switch to disc mode 3 Turn onthe TV and switch to the correct video in channel in one of the following ways e Go to the lowest channel on your TV then press the Channel Down button until you see the Philips screen e Press 0 SOURCE button repeatedly on the remote control of your TV Tip e The video in channel is between the lowest and highest channels and may be called FRONT A V IN VIDEO HDMI etc See the TV user manual on how to select the correct input on the TV 20 EN Select menu display language Note e Skip this setting if this Home Theater System is connected to a HD
16. Dolby Laboratories that contains up to six channels of digital audio front left and right surround left and right centre and subwoofer H HDCP High bandwidth Digital Content Protection This is a specification that provides a secure transmission of digital contents between different devices to prevent unauthorised copyright HDMI High Definition Multimedia Interface HDMI is a high speed digital interface that can transmit uncompressed high definition video and digital multichannel audio It delivers high quality picture and sound quality completely free from noise HDMI is fully backward compatible with DVI As required by the HDMI standard connecting to HDMI or DVI products without HDCP High bandwidth Digital Content Protection will result in no Video or Audio output J JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio Files are recognised by their file extension jpg or jpeg M MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 With the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD MPEG Motion Picture Experts Group A collection of compression systems for digital audio and video EN 49
17. English Glossary P PBC Playback Control A system where you navigate through a Video CD Super VCD with on screen menus that are recorded onto the disc You can enjoy interactive playback and search PCM Pulse Code Modulation A digital audio encoding system Progressive scan The progressive scan displays twice the number of frames per second than in an ordinary TV system It offers higher picture resolution and quality W WMA Windows Media Audio Refers to an audio compression technology developed by Microsoft Corporation WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP Files are recognised by their file extension wma WMV Windows Media Video Refers to a video compression technology developed by Microsoft Corporation WMV content can be encoded by using Windows Media Encoder 9 series Files are recognised by their file extension wmv 50
18. For HTS3377W 3 01 kg EN 45 English Specifications Speakers System full range satellite Speaker impedance e For HIS3270 4 ohm centre 8 ohm Front Rear e For HTS3377 HTS3377W 4 ohm centre 4 ohm Front Rear Speaker drivers e _ Coentre Front Rear 3 full range Frequency response 150 Hz 20 kHz Dimensions WxHxD e For HTS3270 Centre Front Rear 100 x 100 x 75 mm e For HTS3377 HTS3377W Centre 244 x 103 x 74 mm Front 103 x 203 x 71 mm Rear 262 x 1199 x 264 mm Weight e For HTS3270 Centre 0 66 kg Front 0 39 kg Rear 0 38 kg e For HTS3377 HTS3377W Centre 0 79 kg Front 0 54 kg Rear 3 38 kg Subwoofer 46 Impedance 4 ohm Speaker drivers e For HTS3270 165 mm 6 5 woofer e For HTS3377 HTS3377W 165 6 5 woofer Frequency response 40 Hz 150 Hz Dimensions WxHxD e For HTS3270 123 x 310 x 369 mm e For HTS3377 HTS3377W 163 x 363 x 369 mm Weight e For HTS3270 3 88 Kg e For HTS3377 HTS3377W 4 85 kg EN Wireless receiver For HTS3377W only Power Consumption 50 W Frequency Response 6000 Hz S N Ratio 60 dB A Weighted Input Sensitivity 400 600 mV Distortion 1 Dimensions WxHxD 126 x 130 5 x 126 mm Weight 1 11 kg Laser specification Type Semiconductor laser GaAlAs CD Wave length 645 665 nm DVD 770 800 nm CD Output power 6 mW DVD 7 mW VCD CD Beam divergence 60 de
19. IGHT Video Music Description Enhance low and high range for great sounding movie effects and atmosphere Great for action movies and rock pop music Flat and pure sound mode Ideal for listening to classical music and watching live concert disc Clear mid and high range Recreates the atmosphere of a live club with the artist just in front of you Good for jazz music and watching dramas Moderate mid range and surround effects for clear vocals and the atmosphere of a live sports venue It is also ideal for video gaming Dynamically controlled sound mode suitable for watching movies at night or for nonintrusive background music EN 35 English Adjust sound 8 Adjust settings You can customise various kinds of settings as you prefer Refer to the following instructions to navigate through the setup menus Symbol Options It General Setup ac Audio Setup O Video Setup M Preferences Note e Ifthe setup option is grayed out it means the setting cannot be changed at the current state 36 EN General setup General Setup EasyLink Setup Disc Lock Display Dim OSD Language Screen Saver Sleep Timer DivX R VOD Code 1 Press SETUP L gt General Setup menu is displayed 2 Press gt 3 Select an option then press OK A Selecta setting then press OK e To return to the previous menu press 9 BACK e To exit the menu press SETUP
20. MI CEC compliant TV It switches automatically to the same OSD menu language as per your TV setting General Setup EasyLink Setup Disc Lock O English Display Dim Dansk OSD Language O Nederlands Screen Saver O Suomi Sleep Timer DivX R VOD Code O Frangais Deutsch O Italiano Press DISC Press SETUP L gt General Setup menu is displayed N Press gt Press A to select OSD Language in the menu then press P e The language options are different depending on your country or region It may not correspond to the illustration shown here A Ww 5 Press aw to select a language then press OK Tip e You can set the default language for DVD disc menu see Adjust settings gt Preferences gt Disc Menu Change speaker settings Ideally the distance between listening position and all the speakers should be the same If not change the speaker settings based on their distance from the listening position to obtain the best possible surround sound Audio Setup Speakers Volume Speakers Delay HDMI Audio CD Upsampling Audio Sync Press DISC Press SETUP Press Y to select Audio Setup in the menu then press gt e Ifthe speaker setup option is not accessible press twice before you press amp SETUP WN To set the speakers level 1 Select Speakers Volume in the menu then press P Speakers Volume Setup Front
21. MS 6 X 167 For HTS3377W 1000 W RMS wired 6 x167 1000 W wireless 10 tolerance e Frequency response 40 Hz 20 kHz e Signal to noise ratio gt 60 dB A weishted e Input sensitivity e AUX 400 mV e SCART TO TV 200 mV e MP3 LINK 250 mV e Laser Type Semiconductor e Disc diameter 12cm 8cm e Video decording MPEG1 MPEG2 Divx DivX Ultra e Video DAC 12 bits 108 MHz Signal system PAL NTSC e Video S N 56 dB e Audio DAC 24 bits 96 kHz e Frequency response e 4 Hz 20 kHz 44 1 kHz e 4H7z 22 kHz 48 kHz e 4 Hz 44 kHz 96 kHz e PCM IEC 60958 e Dolby Digital IEC 60958 IEC 61937 e DISIEC60958 IEC 61937 Radio e Tuning range FM 87 5 108 MHz 50 kHz e 26 dB quieting sensitivity FM 22 dBf e IF rejection ratio FM 60 dB e Signal to noise ratio FM 50 dB e Harmonic distortion FM 3 e Frequency response FM 180 Hz 10 kHz 6dB e Stereo separation FM 26 dB 1 kHz e Stereo Threshold FM 29 dB e Compatibility Hi Speed USB 2 0 e Class support UMS USB Mass Storage Class e File system FAT12 FAT16 FAT32 Main Unit e Power supply e HTS3270 110 240 V 50 60 Hz e 41853377 HTS3377WV 220 240V 50 Hz e Power consumption e For HTS3270 80 W e k r HTS3377 HTS3377W 180 W Standby power consumption lt 1 W e Dimensions WxHxD e kor HTS3270 HTS3377 360 x 57 x 331 mm e Por HTS3377WV 360 x 57 x 341 mm e Weight e For HTS3270 HTS3377 2 87 kg e
22. N gt MP3 LINK gt DISC On the remote control AUDIO i HAO ose 1 SETUP e Press AUDIO SOURCE repeatedly to switch to the connected audio source Display Device connected to AUX AUDIO IN AUX sockets SCART IN SCART TO TV socket COAX IN COAXIAL DIGITAL IN socket OPTI IN OPTICAL DIGITAL IN socket MP3 LINK MP3 LINK socket Press RADIO to switch to FM band e Press USB to switch to USB mode Press DISC to switch to disc mode 24 EN 5 Play Play a disc Caution e Never place any objects other than discs into the disc compartment e Never touch the disc optical lens inside the disc compartment Press 4 to open the disc compartment NS Insert a disc with its label facing up e For double sided disc load the side to play faces up 3 Press 4 to close the disc compartment and start disc play e To view disc play turn on the TV to the correct viewing channel for this Home Theater System e To stop disc play press M e Check the types of discs supported see Specifications gt Playback media e Ifthe password entry menu is displayed enter the password before you can play the locked or restricted disc e If you pause or stop a disc for about 5 minutes the screen saver activates To deactivate the screen saver press DISC e After you pause or stop a disc and no buttons are pressed within 15 minutes this Home Theater System automatically switches to stan
23. Register your product and get support at www philips com welcome EN FR ES DE NL User manual Manuel d utilisation Manual de usuario Bedienungsanleitung Gebruikershandleiding HTS3270 HTS3377 HTS3377W PHILIPS PHILIPS Philips Consumer Lifestyle SGP 09 CE HTS3377W 12 report No EC DECLARATION OF CONFORMITY Philips Consumer Electronics manufacturer s name Philips Glaslaan 2 5616 JB Eindhoven The Netherlands manufacturer s address declare under our responsibility that the electrical product Philips name HTS3377W 12 type or model Home Theatre System with wireless product description to which this declaration relates is in conformity with the following standards EN 60065 2002 Al 2006 EN 55013 2001 A1 2003 A2 2006 EN 55020 2007 EN 61000 3 2 2006 04 EN 61000 3 3 1995 01 A1 2001 06 A2 2005 11 EN 300 328 V1 7 1 EN 301 489 1 V1 6 1 489 17 V1 2 1 EN 62311 2008 title and or number and date of issue of the standards following the provisions of 2006 95 EC 2004 108 EC amp RTTE 1999 5 EC directives and is produced by a manufacturing organisation on ISO 9000 level Eindhoven 11 March 2009 Frank Dethier place date Innovation Lab Manager Philips Leuven signature name and function Contents Advanced features Create MP3 audio files Adjust sound Control the volume Select surround sound Select a preset
24. Stop disc play before you can access to Preferences Preferences Audio Subtitle Disc Menu Parental PBC MP3 JPEG Display Password DivX Subtitle 1 Press SETUP L gt General Setup menu is displayed 2 Press to select Preferences then press P 3 Select an option then press OK 4 Selecta setting then press OK e To return to the previous menu press gt BACK e To exit the menu press amp SETUP Note e See the explanations of the above options in the following pages 42 EN Audio Selects the default audio language for disc play Subtitle Selects the default subtitle language for disc play Disc Menu Selects the language for disc menu e Ifthe language you have set is not available on the disc the disc uses its own default language e For some discs the subtitle audio language can only be changed from the disc menu e To select the languages that are not listed in the menu select Others Then check the Language Code list at the back of this user manual and enter the respective 4 digit language code Parental Restricts access to discs that are unsuitable for children These types of discs must be recorded with ratings 1 Press OK 2 Select a rating level then press OK 3 Press the Numeric buttons to enter the password e Rated discs above the level you set in Parental require a password to be played e The ratings are cou
25. W PROGRAM GE SCREEN FIT GOH O0 00G 000 PHILIPS HOME THEATER SYSTEM 1 Standby On e Turns on the Home Theater System or switches to standby mode e Press and hold to turn off the Home Theater System and all HDMI CEC compliant devices D 4 Open Close e Opens or closes the disc compartment 3 SLEEP e Sets a delay after which the Home Theater System switches to standby 4 SETUP e Accesses or exits the setup menu Av lt gt Navigation buttons e Navigates through the menus e Press left and right for fast backward or forward search e In radio mode press up and down to tune the radio frequency e In radio mode press left or right to start auto search INFO e For discs displays information about the current status or the disc e For slideshows displays a thumbnail view of photo files gt II Play Pause e Starts pauses or resumes disc play e In radio mode automatically tunes radio stations during first time setup m Stop e Stops disc play e In radio mode erases the current preset radio station SURR Surround Sound e Switches to supported surround sound or stereo sound AUDIO SYNC e Selects an audio language or channel e Press and hold to access the setting for audio sync then press VOL to set the audio delay time Numeric buttons e Selects an item to play SUBTITLE e Select DVD o
26. an for help LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT 2 Your Home Theater System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Feature highlights Video upscaling to 1080p Enjoy watching discs in the highest picture quality available for your HDTV This Home Theater System offers full high definition video playback up to 1080p resolution that provides a highly detailed picture and increased sharpness that delivers a more true to life picture for an amazing viewing experience Philips EasyLink Your Home Theater System supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices Listen to rich uncompressed multi channel surround sound This Home Theater System supports 5 1 channels of uncompressed audio that delivers a real to life sound experience as if you are listening to it live Hi speed USB 2 0 Link and MP3 link Simply plug your USB device into the USB jack to play your MP3 WMA JPEG DivxX files or plug your portable media player to the MP3 LINK jack to enjoy the music play in superb sound quality Sync
27. and the TV with a HDMI cable e Wide Screen Format Defines the wide screen format for disc play Option Superwide 4 3 Pillar Box Description Center position of the screen Is stretched less than the side Applicable only to 720p and above video resolution setting No stretching of the picture Black bars are displayed on both sides of the screen Off Note Picture is displayed according to the format of the disc e This setting is only available if you have set the TV Display setting to 16 9 Wide Screen e HDMI Video Selects the HDMI video output resolution that is compatible with your IV display capability Option Description Auto Detects and selects the best supported video resolution automatically 480i 576i Selects a video 480p 576p resolution that is best 720p 1080i supported by the TV 1080p See the TV manual for details Note e Ifthe setting is not compatible with your TV a blank screen appears Wait for 15 seconds for auto recover or switch to tts default mode as follows 1 Press 4 2 Press lt 4 3 Press ZOOM Closed Caption Turns off or on display captions e On Shows the sound effects in subtitles Applicable only to discs with Closed Caption information included and the TV supports this feature e Off Disables closed caption EN 41 English Adjust settings Preferences Note e
28. arks or registered trademarks of Microsoft Corporation in the United States and or other countries HIGH DEFINITION MULTIMEDIA INTERFACE HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC a USB The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc with the limits for a Class B digital device pursuant to Part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However in a particular installation e This equipment has been tested and found to comply there is no guarantee that interference will not occur 6 EN If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technici
29. box recorder game console Other devices e Portable media player e USB device Note e Refer to the type plate at the back or bottom of the product for identification and supply ratings Before you make or change any connections ensure that all the devices are disconnected from the power outlet Tip Different types of connectors may be used to connect this product to your TV depending on availability and your needs A comprehensive interactive guide to help you connect your product is available at www connectivityguide philips com Place the Home Theater System e Place the Home Theater System where it cannot be pushed pulled over or knocked down Do not place it in an enclosed cabinet e Be sure that you have full access to the power cord for easy disconnection of the Home Theater System from the power supply Wireless receiver is for HTS3377W only Different set of speakers for HTS3270 see Specifications gt Speakers 1 Place this Home Theater System near the TV 2 Place the speakers system at normal listening ear level and directly parallel to the listening area 3 Place the subwoofer at the corner of the room or at least three feet away from the TV 4 Place the wireless receiver for HTS3377W only near the AC outlet and in between the rear speakers Position the wireless receiver with Philips logo directly parallel to the Home Theater Syste
30. dby mode Play video Note e For video disc playback always resumes from the point where it was last stopped To start play from the beginning press M while the message is displayed Control video play 1 Play a title 2 Use the remote control to control the title Button Action gt Il Starts pauses or resumes disc play E Stops disc play gt l Skips to the next title or chapter 4 Skips to the beginning ofthe current title or chapter Press twice to Jump to the previous title or chapter Searches fast forward right or fast backward left Press repeatedly to change the search speed In pause mode slow motion backward or forward play a v Searches slow forward down or slow backward up Press repeatedly to change the search speed For VCD only slow forward play is possible EN 25 English Play Change video play 1 Play a title 2 Use the remote control to change the video play Button AUDIO SYNC SUBTITLE REPEAT ZOOM INFO T SCREEN FIT Action Selects an audio language or channel on a disc Selects the subtitle language on a disc Na Selects or turns off repeat or shuffle mode Repeat options vary depending on the disc type For VCDs repeat play is only possible if the PBC mode is turned off Zooms in or out of the picture To pan through the zoomed image press the Navigation buttons Displays the current status or
31. ferent camera angles 1 During play press INFO Ly The disc status menu is displayed 2 Select Angle then press gt 3 Press the Numeric buttons to select an angle then press OK Ly Play changes to the selected angle Note e Applicable only to discs contain multi angle scenes 28 EN Play DivX video DivX video is a digital media format that retains high quality despite a high rate of compression You can enjoy DivX video on this DivX Certified Home Theater System 1 Insert a disc or USB that contains the DivX videos 2 Press DISC or USB L gt A contents menu is displayed Select a title to play then press PHL 4 Use the remote control to control the title Button Action AUDIO Selects an audio language or SYNC channel SUBTITLE Select DVD or DivX subtitle languages u Stops play For DivX Ultra video press this button again to display the contents menu INFO Displays DivX Ultra video information e You can only play DivX videos that were rented or purchased with the DivX registration code of this Home Theater System see Adjust settings gt General setup gt DivX R VOD Code e You can play DivX video files of up to 4GB e Ifthe subtitle does not appear correctly change the character set see Adjust settings gt Preferences gt DivX Subtitle e This Home Theater System can display up to 45 characters in the subtitle
32. grees 11 Troubleshooting Warning e Risk of electric shock Never remove the casing of the Home Theater System To keep the warranty valid never try to repair the system yourself If you encounter problems when using the Home Theater System check the following points before requesting service lf the problem remains unsolved register your Home Theater System and get support at www philips com welcome If you contact Philips you will be asked for the model and serial number of your Home Theater System The model number and serial number are on the back or bottom of your Home Theater System Write the numbers here Model No Serial No Main unit The buttons on this Home Theater System do not work e Disconnect this Home Theater System from the power outlet for a few minutes then connect again Picture No picture e See TVs manual for correct video input channel selection Change the TV channel until you see the DVD screen e Press DISC e If you have changed the TV Display setting switch back to default mode 1 Press 4 to open the disc compartment 2 Press lt 3 Press SUBTITLE No picture on HDMI connection e Check if the HDMI cable is faulty Replace anew HDMI cable e If this happens when you change the HDMI video resolution you have to switch to its default mode 1 Press A 2 Press 4 3 Press ZOOM Sound No sound e Ensure that the audio cables are
33. he HDMI audio setting when you connect this Home Theater System and the TV with a HDMI cable e On Allows audio output through the TV and the speaker system If the audio format on the disc is not supported it will be downmixed to two channel sound linear PCM e Off Disables audio output from the TV The sound is only output through the speaker system CD Upsampling Converts the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality e Off Disables CD upsampling e 88 2kHz X2 Converts the sampling rate of the CDs twice as high as the original rate Note e CD upsampling is only available in stereo mode Audio Sync Sets the default delay time for audio output when you play a video disc 1 To start press OK 2 Select a speaker delay in the menu then press lt P to set the delay time 3 Press OK to confirm and exit EN 39 English Adjust settings Video setup Video Setup TV System TV Display Screen Fit Picture Setting HDMI Setup Closed Caption A Press SETUP L gt General Setup menu is displayed Press to select Video Setup then press Select an option then press OK RW N Select a setting then press OK e To return to the previous menu press gt BACK e To exit the menu press amp SETUP Note e See the explanations of the above options in the followi
34. ices Disc Lock Sets play restriction for a specific discs Before you start place the disc in the disc compartment maximum 40 discs can be locked e Lock Restricts access to the current disc Once activated a password is needed to unlock and play the disc e Unlock Plays all discs Tip e You can set or change the password see Adjust settings gt Preferences gt Password Display Dim Changes the brightness level of the display panel on this Home Theater System e 100 Normal brightness 70 Medium brightness e 40 Dimmest display OSD Language Selects the default on screen menu language Screen Saver Turns off or on the screen saver mode Helps to protect the TV screen from being damaged due to over exposure to a static image for too long e On Sets the screen saver to appear after 5 minutes of inactivity for example in pause or stop mode e Off Disable screen saver mode Sleep Timer Switches to standby automatically after the preset time e 15 mins 30 mins 45 mins 60 mins Selects the count down time before the Home Theater System switches to standby e Off Disables sleep timer mode EN 37 English Adjust settings DivX R VOD Code Displays the DivX registration code Audio setup 63 Tip Audio Setup e Enter this Home Theater System DivX registration code when you rent o
35. m Tip e To avoid magnetic interference or unwanted noise never place this Home Theater System too close to any radiation devices EN 11 English Connect Connect video cables Connect this Home Theater System to TV to view disc play Select the best video connection that the TV can support e Option 1 Connect to the SCART jack e Option 2 Connect to the HDMI jack for a HDMI DVI or HDCP compliant TV e Option 3 Connect to the video CVBS jack for a standard TV Note e You must connect this Home Theater System directly toa TV Option 1 Connect to the SCART jack 1 Connect a scart cable to the SCART TO TV jack on this Home Theater System and the SCART input jack on the TV Note e Scart connection allows TV s audio output through the speakers Press AUDIO SOURCE repeatedly until SCART IN is displayed on the display panel e This type of connection provides good picture quality 12 EN Option 2 Connect to the HDMI jack 1 Connect an HDMI cable not supplied to the HDMI OUT jack on this Home Theater System and the HDMI input jack on the TV Note e If your device supports HDMI CEC you can control compliant devices with a single remote control see Get started gt Use Philips EasyLink Ea e Ifthe TV has a DVI connection only connect via a HDMI DVI adaptor Connect an audio cable for sound output e You can optimise
36. n order to verify the correct type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable Recycling ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheeled bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on the separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences for the environment and human health Copyright notice Be responsible Respect copyrights This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorised by Mac
37. name e Select the correct character set 1 Press amp SETUP 2 Select Preferences then press P 3 Select DivX Subtitle then press OK 4 Select the character set that supports the subtitle The contents of the USB flash drive cannot be read e The USB flash drive format is not compatible with this Home Theater System e Drive is formatted with different file system which is not supported by this unit e g NTFS e Maximum size of memory supported is 160GB No sound from the rear speakers and the indicator on the wireless receiver blinks continuously for more than one minute For HTS3377W only e Ensure that all required connections are done and do the following steps 1 Press 2 Press INFO a screen is displayed 3 Press 1 then press SURR button within 5 seconds PAIRING SUCCESS is displayed 4 If PAIRING FAIL is displayed repeat step 1 to 3 12 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens The ratio of a standard TV is 4 3 while the ratio of a high definition or wide TV is 16 9 The letter box allows you to enjoy a picture with a wider perspective on a standard 4 3 screen D Divx The Divx codec is a patent pending MPEG 4 based video compression technology developed by Divx Inc It can shrink the file size of digital video and still maintain the high visual quality Dolby Digital A surround sound system developed by
38. ng pages 40 EN TV System Change this setting if the video does not appear correctly By default this setting matches the most common setting for TVs in your country e PAL For PAL system TV e NTSC For NTSC system TV e Multi For TV that is compatible with both PAL and NTSC TV Display Selects one of the following display formats 4 3 Pan Scan PS 4 3 Letter Box LB 16 9 Wide Screen 4 3 Pan Scan For 4 3 screen TV full height display with the trimmed sides 4 3 Letter Box For 4 3 screen TV wide screen display with black bars on the top and bottom of the screen e 16 9 Wide Screen For wide screen TV display ratio 16 9 Screen Fit Fits the picture format to the TV screen to enjoy watching disc play in full screen mode e Select Displays various types of full screen format press OK to select a suitable picture format that best fits to the TV screen e Off Returns to normal screen display Picture Setting Selects a predefined set of picture color settings or customise the personal setting e Standard Original color setting e Bright Vibrant color setting e Soft Warm color setting e Personal Customises the color setting Set the level of brightness contrast sharpness tint and color saturation then press OK HDMI Setup Selects the HDMI video setting when you connect this Home Theater System
39. nnected devices See TVs devices manual for details 2 You can now enjoy the following Philips EasyLink controls 2 EN EasyLink You can turn off or turn on all EasyLink features One touch play When you connect your Home Theater System to devices that support one touch play you can control your Home Theater System and the devices with one remote control For example when you press Play on your Home Theater System remote control your IV automatically switches to the correct channel to show the DVD content To enable One touch play a video disc must be placed in the disc compartment before operation One touch standby When you connect your Home Theater System to devices that support standby you can use your Home Theater System remote control to put your Home Theater System and all connected HDMI devices in standby mode You can perform one touch standby using the remote control from any ofthe connected HDMI devices System Audio Control When you connect your Home Theater System to HDMI CEC compliant devices your Home Theater System can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your Home Theater System Audio Input Mapping When you map the audio input correctly this Home Theater System switches to the audio from the played device automatically connected devices o TV Aux O DVD 3400 Note Optical In
40. ntry dependent To allow all discs to play select 8 e Some discs have ratings printed on them but are not recorded with ratings This function has no effect on such discs Tip e You can set or change the password see Preferences gt Password PBC Turns off or on the content menu of VCDs SVCDs with PBC playback control feature e On Displays index menu when you load a disc for play Off Skips the menu and start play from the first title MP3 JPEG Display Selects to display the folders or display all the files e View Folders Displays the folders of MP3 WMA files e View Files Displays all the files Password Sets or changes the password for locked discs and play restricted DVDs Change Password Old Password D New Password Confirm Password 1 Press the Numeric buttons to enter 136900 or the last set password at Old Password field 2 Enter the new password at New Password field 3 Enter the new password again at Confirm Password field 4 Press OK to exit the menu Note e If you forget the password enter 136900 before you set a new password DivX Subtitle Selects a character set that supports the DivX subtitle Standard English Irish Danish Estonian Finnish French German Italian Portuguese Luxembourgish Norwegian Bokmal and Nynorsk Spanish Swedish T
41. ode for the first time follow the instructions to install the radio stations 1 Press RADIO L gt AUTO INSTALL PRESS PLAY is displayed 2 Press H L gt All detected radio stations are stored L gt Once complete it tunes to the first preset radio station e To stop auto tuning press W Note e This Home Theater System can store up to a maximum of 40 radio stations e If auto installation is not activated or less than 5 radio stations are stored you will be prompted to install the radio stations again Listen to radio 1 2 Press RADIO Use the remote control to control the radio Button Action Id gt Selects a preset radio station AV Tunes the radio frequency up or down m Press and hold this button to erase the current radio station from the preset list The preset number for other radio stations remain unchanged Reinstall all the radio stations 1 2 Press RADIO Press and hold PROGRAM for more than 5 seconds L gt All previously stored radio stations are replaced Note Search and store radio stations individually 1 2 4 Press RADIO Press q lt gt gt L gt It starts searching until a radio station is detected Repeat step 2 until you tune to the radio station you wish to store e To finetune the radio frequency press A V Press PROGRAM L gt The preset station number blinks L gt If no action is carried out within 20 sec
42. on the Home Theater System and the AUDIO Note output jacks on the TV e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until AUX is Note displayed on the display panel e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until AUX is displayed on the display panel Connect to coaxial jack 1 Connect a coaxial cable not supplied to the COAXIAL DIGITAL IN jack on the Home Theater System and the COAXIAL DIGITAL output jack on the device Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until COAX IN is displayed on the display panel Connect to optical jack OPTICAL DIGITAL IN OPTICAL DIGITAL OUT 1 Connect an optical cable not supplied to the OPTICAL DIGITAL IN jack on the Home Theater System and the OPTICAL SPDIF output jack on the device Note e To listen to the audio output from this connection press AUDIO SOURCE repeatedly until OPTI IN is displayed on the display panel EN 17 English Connect Connect portable media player 1 Connect a 3 5mm stereo audio cable not supplied to the MP3 LINK jack on this Home Theater System and the phone jack on the portable media player such as MP3 player Note Connect power cord Warning e Risk of product damage Ensure that the power
43. onds after the above step it exits the preset mode Press M gt or the Numeric buttons to select a preset number to store Press PROGRAM to confirm Note e Ifthe FM radio station transmits RDS Radio Data System data the name of the radio station is displayed e Check the radio antenna connection if no stereo signal is detected or less than 5 stations are detected during radio installation EN 33 English Play 5 Advan ced 6 Select the audio track then press OK e To select another track repeat step features 6 e To select all tracks select Select All in the menu and press OK R e To deselect all tracks select Create MP3 audio files Deselect all in the menu and press OK You can convert audio CDs into MP3 audio 7 Select Start in the menu to convert files with this Home Theater System The created MP3 audio files are saved in your USB then press OK L gt Once complete a new folder is device created automatically in the USB Option Description device to store all the new MP3 files Speed Selects the write to file speed e To exit the menu select Exit and If Normal speed is selected press OK music play can be heard while creating the MP3 file Note Petar cee me quality level Higher While you convert do not press any buttons bitrate for better sound quality DTS CDs and copy protected CDs cannot be and bigger file size converted ear Write protected
44. other Non HDMI e Before you start ensure that the audio output of Coaxial In the HDMI TV and other HDMI devices have been connected to the audio input jacks on this Home Theater System General Setup For example ifthe TV audio is SET AT connected to the AUX jack on this E J Home Theater System select Aux Disc Lock O One Touch Play See One Touch Standby and map with the TV brand name at the right panel OSD Language O System Audio Control Screen Saver O Audio Input Mapping 6 Select the audio input of this Home Sleep Timer Theater System that is used to connect Divx R VOD Code to other HDMI device e g AUX SCART IN then press gt 7 Select the correct connected device then 1 Press DISC press OK 2 Press SETUP L gt Repeat steps 5 to map other L gt General Setup menu is displayed connected devices Press P 8 Press SETUP to exit the menu A w Select EasyLink Setup then press gt e One Touch Play and One Touch Standby functions are turned on by default in the factory 5 Select System Audio Control gt On then press OK to start scanning devices Ly Once complete audio input mapping menu is displayed EN 23 English Get started Select a play source On the main unit c o 000 o U J SOURCE e Press the SOURCE button repeatedly to select DISC gt USB gt FM gt SCART IN gt AUX gt COAX IN gt OPTII
45. r DivX subtitle languages SCREEN FIT e Fits the picture format to the TV screen CREATE MP3 ZOOM e Accesses the menu to create MP3 e Zooms in or out of the picture EN 9 English Your Home Theater System 10 Source buttons e AUDIO SOURCE Selects an audio input source e RADIO Switches to FM band e USB Switches to the USB source e DISC Switches to the disc source OK e Confirms an entry or selection gt BACK e Returns to a previous screen e For DVD goes to the title menu e For VCD version 2 0 or SVCD with PBC turned on returns to the menu during playback 4 gt Previous Next Skips to the previous or next title chapter or track x Mute e Mutes or restores audio output VOL e Increases or decreases volume SOUND e Selects a predefined sound effect ANGLE e Displays video from different camera angles REPEAT PROGRAM e Selects or turns off repeat or shuffle mode e In radio mode resets the list of preset stations press to manually reset press and hold to automatically reset REPEAT A B e Marks the section for repeat play or turns off repeat mode EN 3 Connect Make the following connections to use your Home Theater System Basic connections Video Speakers and subwoofer Wireless receiver for HTS3377W only Power Optional connections Radio antenna Audio e Audio from TV e Audio from cable
46. r purchase video from www divx com vod The DivX videos rented or purchased Speakers Delay through the Divx VOD Video On Demand HDMI Audio service can be played only on the device to which it is registered Speakers Volume CD Upsampling Audio Sync Press SETUP L gt General Setup menu is displayed Press to select Audio Setup then press P Select an option then press OK RW N Select a setting then press OK e To return to the previous menu press 9 BACK e To exit the menu press SETUP Note e See the explanations of the above options in the following pages 38 EN Speakers Volume Sets the volume level of each speaker to get the ideal audio balance 1 To start press OK 2 Select a speaker in the menu then press lt P to adjust the volume level 3 Press OK to confirm and exit Note e The test tone is emitted from the speaker which you adjust Speakers Delay Sets the delay time for the center and rear speakers if they are placed closer to the listening position so that the sound output from all speakers reach the listening position at the same time 1 To start press OK 2 Select a speaker in the menu then press lt P to set the delay time 3 Press OK to confirm and exit Note e Allow Ims setting for every 1 foot distance between the speaker and the listening position HDMI Audio Selects t
47. rovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation Reverse engineering or disassembly is prohibited Copyright in the U K Recording and playback of material may require consent See Copyright Act 1956 and The Performers Protection Acts 1958 to 172 Trademark notice Q DOLBY DIGITAL PRO LOGIC Il Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Vea Divx ULTRA DivX DivX Ultra Certified and associated logos are trademarks of DivX Inc and are used under license Official Divx Ultra Certified product Plays all versions of DivX video including DivX 6 with enhanced playback of Divx media files and the Divx Media Format Plays DivX video with menus subtitles and audio tracks S dts Digital Surround Manufactured under license under U S Patent F s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2007 DTS Inc All Rights Reserved Lutfi ENERGY STAR 3 ENERGY STAR and the ENERGY STAR mark are registered U S marks EN 5 English Important Au Plays A Windows m Media Windows Media and the Windows logo are tradem
48. rvals This option is not available in stop mode Tip Sync audio output with video play If the video play is slower than the audio output sound does not match with the pictures you can delay the audio output to match the video ee SYNC ODD T Press and hold AUDIO SYNC until AUDIO SYNC is displayed 2 Within five seconds press VOL to set the delay time for audio output Note e fthe volume control is not used within five seconds it resumes normal volume control function e You can change the PBC setting see Adjust settings gt Preferences gt PBC Quick skip play to a specific time 1 During play press INFO Ly The disc status menu is displayed 2 Press AY to view information then press OK e TT Time title time e Ch Time chapter time e Disc Time disc time e Track Time track time 3 Press the Numeric buttons to enter the time where you want to skip to then press OK Note e The options are different depending on the disc type EN 27 English Play Repeat play a specific section 1 During play press REPEAT A B where you want to set as the starting point 2 Press REPEAT A B again to set the ending point Ly Repeat play starts 3 To cancel repeat play press REPEAT A B again Note e The marked section for repeat play is only possible within a track title View video play from dif
49. the audio output with the video play Synchronise audio and video by delaying the audio output if the video signal sent to the TV is slower than the audio streams Create MP3 files Convert your favorite audio tracks from an audio CD into MP3 format The created MP3 files are saved in your USB device Screen Fit View the movie in full screen display on any TV Region codes You can play discs with the following region codes DVD region code Countries Russia EN 7 English Your Home Theater System 9 VOL Increases or decreases volume MP3 LINK Main unit Connects a portable audio player 11 lt gt USB e Connects a USB supported device Product overview O0 QOMOOODHOOW Standby On e Turns on the Home Theater System or switches to standby mode Disc compartment G 4 Open Close e Opens or closes the disc compartment 4 gt II Play Pause e Starts pauses or resumes disc play e In radio mode automatically tunes radio stations during first time setup m Stop Stops disc play e n radio mode erases the current preset radio station 6 SOURCE e Selects a media to play or listen to audio from the connected device T Display panel e Displays the current status or disc information IR sensor e Detects signals from the remote control Point the remote control at the IR sensor Remote control OO OO OOOO W
50. urkish Polish Czech Slovak Albanian Hungarian Slovene Croatian Serbian Latin script Romanian Central Europe Cyrillic Belarusian Bulgarian Ukrainian Macedonian Russian Serbian Greek Greek Hebrew Hebrew Chinese Simp Simplified Chinese Korean Korean Note e Ensure that the subtitle file has the exact same file name as the movie file If for example the file name of the movie is Movie avi then you will need to name the text file Movie sub or Movie srt Version Info Displays the software version of this Home Theater System Tip e This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this Home Theater System Default Resets all the settings of this Home Theater System to factory default except for Disc Lock Password and Parental settings EN 43 English Adjust settings 9 Additional Information Update software To check for new updates compare the current software version of your Home Theater System with the latest software version if available at the Philips website Preferences Disc Menu A Parental PBC MP3 JPEG Display Password DivX Subtitle Version Info Default Press SETUP Select Preferences gt Version Info then press OK Write down the version number then press 2 SETUP to exit
51. ystem remote control or batteries near naked flames or other heat sources including direct sunlight e Only use this Home Theater System indoors Keep this Home Theater System away from water moisture and liquid filled objects e Never place this Home Theater System on other electrical equipment e Keep away from this Home Theater System during lightning storms e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Visible and invisible laser radiation when open Avoid exposure to beam CE This product complies with the radio interference requirements of the European Community This product complies with the requirements of the following directives and guidelines 2006 95 EC 2004 108 EC C 0560 Hereby Philips Consumer Lifestyle declares that this Home Theater System HTS3377W is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC This product is in compliance with EEE directives Mains fuse UK only This Home Theater System is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer i
Download Pdf Manuals
Related Search