Philips 21PT5017B 21" real flat TV
Contents
1. CEDE 19 Storing 5 dross deena 20 5 21 OPE 23 Recycling Directive To minimise harm to the environment the batteries supplied 9 with the TV set do not contain mercury or nickel cadmium If possible when disposing of batteries use recycling means available to you Your TV set uses materials which are reusable or which can be recycled To minimise the amount of waste in the environment specialist companies recover used sets for dismantling and collection of reusable materials contact your dealer SAFETY INFORMATION ANDTIPS Safety information remove mains plug when the red light below the TV screen is flashing continuously bright white line is displayed across the screen cleaning the TV screen Never use abrasive cleaning agents such as scouring powder Use a slightly damp chamois leather or soft cloth there is a lightning storm the set is left unattended for a long period of time No naked flame sources such as lighted candles should be placed top of the TV or in the vicinity Do not place your TV set under direct sunlight or heat Leave at least 5 cm around each side of TV set to allow for proper ventilation Avoid placing your set e g near the window where it is likely to be exposed2. CONNECTING AUDIO VIDEO PLAYBACK Connection for viewing VCRs AV sockets on rear of TV VIDEO AUDIO Back of VCR with Video and Audio output sockets You can view the playback of VCR tapes Video Disc players camcorders etc by using the AUDIO and VIDEO INPUT sockets on the rear of the TV the video and audio RCA cables from the VIDEO and AUDIO IN on the rear of the Rear AM pike asd Hy EE refi Be simultaneously As the Side AV does not have the Auto priority you will have to manually switch to Side AV with the button to receive video and audio content of the video camera CONNECTING AUDIO VIDEO RECORDING Connection for recording from the TV channel to VCR AUDIO VIDEO AV sockets on the rear of TV Back of VCR with Video and Audio input sockets AUDIO VIDEO Rr 7L AVI in Cable AV sockets on rear of TV Monitor out VCR with Video and Set top box mmm SE Audio input sockets Connect the RF cable from the OUTput of the set top box to the Antenna IN of the VCR From the VCR s Antenna OUT connect the RF cable to the Antenna socket on the rear of the Connect the video and audio RCA cables from the VIDEO and AUDIO IN sockets
3. Press button MENU Enter main menu Press repeatedly until Preset main menu is selected Press repeatedly until Channel submenu is selected Press repeatedly to select the Channel number Example to change to channel nuber 31 Press repeatedly until Band submenu is selected Select the frequency band VHFL VHFH UHF 13 Result on screen Contrast Bright Color Sharpness Color Temp 1 J e Skip Fine Tune Auto Store 1 J MENU Band Manual Store Skip Fine Tune Auto Store 1 e MENU Channel 3 Manual Store Skip Fine Tune Auto Store 1 J MENU TUNING YOUR CHANNELS MANUALLY Step Press button Result on screen 9 CH Press repeatedly until Or Manual Store submenu CH is selected Skip Fine Tune Auto Store tiie gt MEN VOL Press VOL to start Or search upwards or VOL VOL to search downwards from the current posi tion and frequency band SEARCH SSS VOL Press VOL to stop P Or manual searching VOL upwards to stop manual searching downwards MENU Exit menu from screen NOTE If the channel searched is not the one you want restart the search upwards or downwards by pressing VOL or VOL respectively 14 FINE TUNING YOUR CHANNELS This feature lets you adjust the picture reception in places where the reception is weak Step Press button MENU E
4. CH selected MENU OK Enter Settings submenu Press repeatedly until the Or Language submenu is ColorSys AUTO CH selected Snd Svs BG English AVL On VOL Press repeatedly to toggle Or between the available lan ti 5 MENU VOL guages you want to select OO MENU Exit menu from screen 11 TUNING YOUR CHANNELS AUTOMATICALLY You can search for all active channels automatically with the Auto Store feature Step Press button MENU Enter main menu VOL Press repeatedly until the Or PRESET main menu is VOL selected CH Press repeatedly until the Or Auto Store submenu is CH selected Result on screen Contrast Bright Color Sharpness Color Temp 1 e 1 d Channel Band Manual Store Skip Fine Tune 1 4 OK MENU Auto searching will begin All available channels found will be stored from number o OK onwards When all frquency bands have been searched auto searching will stop The program of the first searched channel will be displayed VOL To stop auto searching MENU Exit menu from screen 12 TUNING YOUR CHANNELS MANUALLY You can manually search your channel from any frequency band and select your preferred channel number with the Manual Store feature Step VOL Or VOL VOL Or VOL o pi Or CH VOL Or VOL
5. VOL Or VOL MENU Press button Example To set TV to turn on channel 11 at 22 59 hrs once Press repeatedly until Start Time is selected Press repeatedly until Once is selected Press so that 0 00 is selected Press repeatedly until 22 59 is selected Press so that Channel is selected Press repeatedly until Channel is set to 11 Exit menu from screen Result on screen 3 c Ca Time 18 00 Stop Time Daily 22 00 0 00 t lt e 5 MENU Start Time Channel 1 J amp Start Time You can only enter the Start Time using the VOL or VOL buttons The numeric 0 9 buttons cannot be used to enter Start Time The Start Stop Timer will not operate Daily The Start Stop Timer is set to turn the TV on or off everyday The Start Stop Timer is set to turn the TV on or off only once Channel The channel the TV will display at Start Time Stop You should set a time later than that set for Time Time 22 SPECIFICATIONS Picture Sound Loudspeakers 2x 5W 250 W PMPO 94 Reception PSS TV system PAL B G PAL D K PAL I SECAM B G except 79 and 94 SECAM D K except 79 and 94 Video playback NTSC PAL O comen Rear AN I CVBS In AV2 Monitor Out Antenna In 75 C Side Top CVBS in Headphone out Mains voltage frequency 100 240 V 50 60
6. as shown to familiarise yourself with installation and other features available for your TV set TIP You may encounter instability of the on screen display when there is no signal input to the TV When this happens use the button on your remote control to select channel Step Press button Result on screen MEN Enter main menu mm 1 ub dis Ca The Picture main menu is always selected by default Contrast Bright Color panel shows four symbols Color Temp Picture Feature Timer and Tn Em Preset Use the VOL or VOL buttons to select the main menu items The Submenu main panel displays the menus of the selected main menu item Use the or CH to select the submenu items To navigate the submenu Or items CH Example The Brightness Contrast submenu item is selected Color as shown Sharpness Color Temp Normal t 5 e MENU VOL To adjust the individual Or submenu items voL Example Press repeatedly to adjust the brightness level Bright 45 MENU Exit menu from screen 10 SELECTING YOUR MENU LANGUAGE The Language option lets you set your language for the TV s on screen display menus Step Press button Result on screen Q MENU Enter main menu Contrast Bright Color Sharpness Color Temp 1 J e VOL Press repeatedly until the Or FEATURE main menu is voL selected CH Press repeatedly until Or the Settings submenu is
7. but poor Try increasing the contrast and brightness setting colour or no picture Snowy picture and noise Check antenna connection at the rear of the TV Horizontal dotted lines Possible electrical interference e g hairdryer vacuum cleaner etc Switch off appliances Double images or Possible poor positioning of antenna Use of a highly Ghost images directional antenna may improve reception TV not responding to Check life span of batteries of remote control handset remote remote control Aim remote control directly at remote sensor lens on the front panel of the TV GETTING STARTED Connecting the antenna Connect the aerial plug to the antenna socket on the backcover Insert the mains plug into the wall socket Connecting the mains For correct mains voltage refer to type sticker at the rear of the TV set Consult your dealer if mains supply is different Note This diagram is not representative of the actual plug and socket Switching on the set Press the main power button to switch on off the TV e f the set is standby indicator is lit press the Power button on the remote control to switch on set Disconnecting from the mains mains switch 1 on the TV is used as a dis connecting device Installing the remote control batteries Insert the correct type of batteries into the compartment Ensure the batteries are placed in the right direction
8. down the sound In menu operation to adjust the setting for all selected options MENU button To display main menu or return to previous screen Alternate Channel button To toggle last viewed channel or current channel 0 9 numeric buttons To directly select TV channel number FUNCTIONS OF THE TV CONTROL PANEL The TV controls are on the front panel just below the screen Mains Power button Press to turn on or turn off TV If TV is in Standby mode press CH A or CH V on the TV front panel or POWER button on the remote control to turn on button on the remote control Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it Volume buttons To turn up or turn down the TV sound Standby light indicator Indicator is lit when standby mode is activated To switch TV to Standby mode press the POWER Channel V buttons Select channel descending ascending order TIP You can enter the main menu by pressing both the Volume and Volume buttons at the same time Press the Channel A or V buttons to select the next item on the menu Press Volume or Volume button to access sub menu and adjust the settings SELECTING THE MAIN MENU The User Manual explains the operation of the TV set using the buttons on the remote control unless otherwise stated Please read the following instructions carefully and follow the steps
9. of the VCR to the MONITOR OUT on the rear of the TV FUNCTIONS OF THE REMOTE CONTROL 00 POWER r OG GO 5 PHILIPS TELEVISION This TV features a full function remote control Its compact design is the result of having many of the buttons with multiple functions POWER button To turn on the TV or switch it to Standby mode button To browse the channels you set in your Favourite list SOUND SYS button To directly select a sound system without entering the submenu Input button To select an input signal TV AVI or AV2 SMART PICTURE button To select Personal Soft Natural or Rich picture DEL Info button To display information such as channel number colour system sound system or the time In Favourite Channel submenu press to delete the favourite channel number MUTE button To turn on or turn off sound CH CH button To select channels in ascending or descending order In menu operation to highlight a menu item OK button To enter submenu or confirm menu operation SLEEP button To set sleep timer from 10 to 120 minutes in 10 minute intervals cancel sleep timer or display remaining time VOL VOL button To turn up or turn
10. voL Selected las o CH Press repeatedly until Or Channel submenu is CH selected o VOL Press to select channel Manual Store number to skip Fine Tune voL Example channel 20 Auto Store e CH Press repeatedly until o Or Skip submenu is selected CH Channel 20 Band VHFL VOL Press repeatedly until Store Down Skip is On Fine Tune Down Or 4 Auto Store VOE 11 MENU e MENU Exit menu from screen Cl Channel Band Manual Store Fine Tune Auto Store 1 J e 15 VHFL Down Down MENU STORING YOUR FAVOURITE CHANNELS This feature lets you store up to six favourite channels which you can view or browse using the FAV button on the remote control Step o MENU VOL Or VOL CH Or CH OK CH Or CH VOL Or VOL MENU Press button Enter main menu Press repeatedly until the FEATURE main menu is selected Press repeatedly until FAV Ch submenu is selected The Ch entries are displayed Example To store channel 8 in your favourite channel Press to select Chl Press repeatedly until 08 is selected Repeat steps to 4 de scribed above to store the other favourite channels Exit menu from screen DELETING YOUR FAVOURITE CHANNELS Example To delete favourite channel 4 Highlight your favourite channel 2 Press the DEL button on your remote control to delete the favour
11. Hz 56 and 94 220 240 V 50 60 Hz 63 69 and 79 Set dimensions W x H x D mm 594 x 460 x 486 NOTE Specifications subject to change without notice 23 PHILIPS Be responsible Respect copyrights Specifications are subject to change withoutnotice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2004 Koninklijke Philips Electronics rights reserved www philips com 3139 187 57391
12. Real Flat Television 21PT5007 21 PT5017 21 5027 User Manual PHILIPS PHILIPS 5 Introduction Safety information and Tips 3 Before calling Customer Service gt 4 Basic Installation functions erine d E EA E 5 Connecting Audio Video Playback s seessssessssessssesessesesessesessesesrssesssseseosssrsrssrseessseesesee 6 Connecting Audio Video Recording eessssessssesesresesresesessesesrssesrssrsresesesseseoeesreeeseseeeesee 7 Functions of the Remote control ssesssessseseseesseesseesseesseesseesseessesseessresssesssesseossoeesseeseessee 8 Functions of the control 9 TV Installation Selecting the Main Menu 10 Selecting your menu language Tuning 4 12 Tuning your channels mantally Fine Tuning your channels 5 Changing the system settings 16 Adjusting the TV 17 Features Swapping your TV channels ace reote eto atari iun 18
13. en Bright Color Sharpness Color Temp 1 J e Ex CH Swap FAV CH 11 OK MENU Z ColorSys BG Snd Sys Language English AVL ColorSys Language t l e MENU ColorSys AUTO Snd Sys B G Language English 4 MENU ADJUSTING THETV PICTURE The Picture feature lets you fine tune your TV picture such as the contrast brightness colour sharpness and colour temperature Step MENU VOL Or VOL CH VOL Or VOL VOL Or VOL MENU Press button Enter main menu Press repeatedly until the PICTURE main menu is selected Press repeatedly to select Contrast Brightness Color Sharpness or Color Temp Press to increase or decrease levels for Contrast Brightness Color and Sharpness Press to change settings for Color Temp Normal Warm or Cool Exit menu from screen 17 Result on screen Contrast Bright Color Sharpness Color Temp 1 J Contrast 90 Bright 65 Color Sharpness Color Temp Normal 1 J e MENU Contrast Bright Color Sharpness 50 Warm MENU T J SWAPPING YOURTV CHANNELS After auto or manual searching of channels you can reorder the channel numbers using the Channel Swap feature 18 Step Pre
14. ite channel 20 Result on screen Contrast Bright Color Sharpness Color Temp 1 J 1 Settings CH eae tt OK FAV Ch2 FAV Ch3 FAV Ch4 FAV Ch5 FAV Ch6 t te DEL MENU E FAV Ch2 Ch3 FAV Ch4 FAV Ch5 FAV Ch6 1 Ch1 Ch2 Ch5 Ch6 t DEL MENU SETTING THE TIMER The Timer feature lets you program the TV to turn on and turn off at a specific time and channel Step Press button Result on screen Q MENU Enter main menu e VOL Press repeatedly until the TIMER main menu is selected VOL Stop Time Off Start Time Channel VOL set time to r 18 00 hrs voL Press repeatedly until Time is 18 00 Stop Time Start Time Channel t 14 e MENU o CH Example To set TV to turn Or off channel at 22 00 hrs CH everyday Time Press repeatedly until Stop Time is selected SATIE O VOL Press repeatedly until Channel Or Daily is selected t le VOL CH Press so that 0 00 is selected Time VOL Press repeatedly until Stop Time 6 22 00 is selected Start Time VOL 21 Contrast Bright Color Sharpness Color Temp 1 J Channel 1 e SETTING THE TIMER Step CH Or CH VOL Or VOL CH VOL Or VOL CH
15. nter main menu VOL Or VOL VOL Or VOL Press repeatedly until the PRESET main menu is selected Press repeatedly until Fine Tune submenu is selected Press VOL to fine tune upwards and VOL to fine tune downwards MENU Exit menu from screen 15 Result on screen Contrast Bright Color Sharpness Color Temp 1 J O Channel Band Manual Store Skip Auto Store 1 J e Channel Band Manual Store Auto Store Manual Store Skip Auto Store 1 L e MENU CHANGING THE SYSTEM SETTINGS The Settings feature lets you set the colour system sound system and Auto Volume Level AVL AVL enables the volume to remain at a predetermined level to prevent sudden changes in volume levels during commercial breaks or when you are surfing the channels Step o Press button MENU VOL Or VOL VOL Or VOL MENU Enter main menu Press repeatedly until the FEATURE main menu is selected Press repeatedly until Settings submenu is selected The Settings entries are displayed Press repeatedly to select ColorSys Snd Sys or AVL Press repeatedly to change the settings for ColorSys AUTO PAL or SECAM Snd Sys BG DK or I AVL On or Off Exit menu from screen 16 Result on scre
16. ss button Result on screen Cp MENU Enter main menu Contrast Bright VOL Press repeatedly until the Color 2 Or FEATURE main menu is Med selected VOL CH Press repeatedly until Or CH Swap submenu is 1 CH selected Settings e Swap entries FAV CH are displayed 44 OK MENU o Press select From Or CH VOL Press to select to select the channel you want to VOL change Example Channel 30 14 MENU Press to select To VOL Press to select to select Or the channel you want to Exchange VOL swap Example Channel 22 OK MENU Q CH Press to select Exchange Press to select On OK Channel 30 is now swapped with channel 22 MENU menu from screen 1 4 OK SKIPPING CHANNELS This feature lets you skip or edit channels which have bad or weak TV signal NOTE Once a channel is skipped you cannot access it by using the CH or buttons or the numeric 0 9 buttons on the remote control You will need to restore the skipped channels first RESTORING SKIPPED CHANNELS Repeat Steps to 5 described above 2 Press VOL or VOL repeatedly until Skip is Off Example Channel 15 is restored 3 Press MENU to exit 19 Step Press button Result on screen MENU Enter main menu As Contrast Bright Col o VOL Press repeatedly until the Sha ness Or PRESET main menu is Color Temp
17. to rain or water No objects filled with liquids should be placed on top the TV so as to avoid dripping or splashing of liquids on the set Tips Do not leave your set on standby mode for a prolonged period of time Switch off set to allow it to be demagnetised A demagnetised set supports good picture quality Do not shift or move the set around when it is switched on This will result unevenness in colour in some parts of the screen Never try to repair a faulty TV yourself Always check with a skilled service personnel BEFORE CALLING CUSTOMER SERVICE Below is a list of frequently occurred symptoms Before you call for service make these simple checks Some of these symptoms can easily be rectified if you know what to do What you should do Colour patch uneve Switch off the TV from the mains power button Wait for 20 ness minutes before switching on again Check the TV is not placed too near speakers or magnetic objects No power Check the TV s AC power cord is plugged into the mains socket If there is still no power remove the plug Wait for 60 seconds and re insert plug Switch on the TV again No picture Check the antenna connection at the rear of the TV Possible TV station problem Try another channel Good picture Try increasing the volume but no sound Check that the sound is not turned off If it is turned off press the Mute button on the remote control to restore sound Good sound
Download Pdf Manuals
Related Search