Home

Philips LCD TV 47PFL7404H

1. SOUND Launches the sound menu Not supported on all models Q2 lt Volume Increases or decreases volume gt BACKP P Previous channel e Returns to the previous menu screen e Returns to the previous channel UK only Not supported on MHEG channels i GUIDE Accesses or exits the Electronic Programme Guide EPG SCENEA Wallpaper Displays wallpaper on your TV screen Not supported on all models DEMO Toggles the demonstration menu on or off TV Switches back to the aerial source SUBTITLE Enables or disables subtitles Controls the connected EasyLink compliant device 4 Use your product This section helps you perform basic operations see Use more of your product on page 12 Switch your TV on off or to standby To switch on e fthe front LED indicator is off press POWER at the side of the TV e Ifthe front LED indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L The front LED indicator switches to red To switch off e Press OPOWER at the side of the TV Ly The front LED indicator switches off Tip Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Note
2. The first time you use EPG you may be prompted to perform an update Follow the on screen instructions to perform the update Un1 Press the Navigation buttons to select the channel to unhide Press 2 OPTIONS L gt The options menu appears N O Press the Navigation buttons to select Unhide channel then press OK The channel is unhidden Note Repeat steps 5 through to unhide other channels Use the Electronic Programme Guide Note e EPG is not available in all countries If available you will receive either Now Next or 8 days EPG EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre e Set reminders when programmes start e Set up preferred EPG channels When watching TV press GUIDE The EPG menu appears Press e The Navigation buttons to move around the screen e INFO to view more information about a programme see View channel programme information on page 22 e E OPTIONS to view the options menu see Use the EPG options menu on page 23 Press gt BACK to exit to the original channel or press OK to exit to the selected channel View channel programme information 1 When watching TV or when in EPG press INFO The programme information screen appears Press t
3. Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world All other registered and unregistered trademarks are the property of their respective Owners BBE Manufactured under licence from BBE Sound Inc Licensed by BBE Inc under one or more of the following US patents 5510752 5736897 BBE and BBE symbol are registered trademarks of BBE Sound Inc EN B English 2 Important Read and understand all instructions before you use your IV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the T V If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the T V remote control and batteries at all tim
4. e If you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV Switch channels G 22 Ge E L C 8 59 Cras E 33 mnmmmmm E ummu SOUND LECCO e Press P on the remote control or P CH on the side of the TV e Enter a channel number using the Numeric buttons e Use the channel grid see Switch channels with the channel grid on page 10 EN 9 English Note When you use a favourite list you can only select those channels in the list Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format v ume eee 1 Press OK he channel grid appears 2 Press the Navigation buttons to select a channel J Press OK to confirm your choice The selected channel appears 10 EN Adjust TV volume enm mmmmmmm i y VOLUME a O a tas SOURCE To increase or decrease volume e Press lt 1 e Press VOLUME on the side of the TV To mute or unmute sound e Press X to mute the sound e Press K again to restore the sound Note Use the Sound menu to adjust headphone volume see Adjust sound settings on page 17 Watch connected devices Note For easy access add new devices to the home
5. gt Analogue Manual installation gt System 4 Press OK L gt A list of regional systems appears D Press the Navigation buttons to select your country or region 6 Press OK to confirm your choice Ly The selected country or region is applied EN 33 English Step 2 Search and store new TV channels 1 2 In the Analogue Manual installation menu press the Navigation buttons to select Find channel Press OK he Find channel menu appears 34 Press e he Navigation buttons or Numeric buttons to manually enter the channel frequency e The Navigation buttons to select Search next then press OK to automatically search for the next channel When the correct channel frequency is selected press the Navigation buttons to select Done Press OK The Analogue Manual installation menu appears Press the Navigation buttons to select Store current channel to store the new channel under the current channel or Store as new channel to store the new channel under a new channel number Press OK to confirm your choice L The channel is stored EN Fine tune analogue channels You can fine tune analog channels manually when reception is poor 1 2 When watching TV select the channel to fine tune Press f Home L gt The home menu appears Press the Navigation buttons to select Setup Press OK The Setup menu appears Press the N
6. EF Shetland Islands 2010 STV Central 2010 11 Yorkshire Anglia 2011 Central Wales ZOL 2009 10 London 2012 eridian 2012
7. he home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears Press the Navigation buttons to select Installation gt Decoder gt Channel U A Press the Navigation buttons to select Status then the location of the decoder eg EXT 1 or EXT 2 Press OK to confirm your choice L he decoder is assigned Use Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note Philips does not guarantee 10076 interoperability with all HDMI CEC devices Note he EasyLink compliant device must be switched on and selected as the source EasyLink features One touch play When you connect your TV to devices that support one touch play you can control your TV and the devices with one remote control One touch standby When you connect your TV to devices that support standby you can use your TV remote control to put your TV and all connected HDMI devices in standby mode System audio control When you connect your TV to HDMI CEC compliant devices your TV can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your TV You can use the remote control from the conne
8. Audio input from devices that require a separate audio connection such as a computer AUDIO IN LEFT RIGHT HDMI DVI HDMI 2 DVI HDMI 3 DVI VGA 3 AUDIO OUT L R Analogue audio output to home theatres and other audio systems 6 EXT 3 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT 3 _ OOOO 7 HDMI 1 2 3 Digital audio and video input from high definition digital devices such as Blu ray players HDMI Note Only one HDMI connector is available on 19 22 models The HDMI connector on these models is labelled as HDMI instead of HDMI 1 TV ANTENNA Signal input from an antenna cable or satellite 150 r TV ANTENNA Side connectors Refer to the correct connector diagram for your V screen size 26 52 S L AUDIO R 19 22 S VIDEO VIDEO o 0O00 SOO D 2 COMMON INTERFACE COMMON INTERFACE 394 ml HDMI ie f SERV U 1 AUDIO IN L R Audio input from analogue devices connected to VIDEO or S VIDEO sag VHS A English 2 VIDEO Composite video input from analogue devices such as VCRs 3 S VIDEO Video input from analogue devi
9. K Kensington lock L language troubleshooting light sensor location lock Kensington M menu home menu language setup menu teletext troubleshooting Mono Stereo multimedia listen to music watch videos 29 31 20 47 3 48 17 12 13 15 32 33 44 47 15 30 44 12 12 13 18 47 17 28 28 Multimedia supported formats USB music digital radio supported formats USB N Noise reduction P PC mode Personal Indentification Number or PIN code photos slideshow supported formats picture and sound experience bar picture format picture format change troubleshooting Pixel Plus power us R RC key forwarding reception remote control key forwarding overview technical specifications troubleshooting S safety SCART settings picture sound settings settings assistant setup menu sharpness EN s 2 27 45 28 15 E 47 27 45 15 16 47 15 47 44 47 44 45 47 bri 15 17 15 14 13 15 e English shop mode sleep timer smart settings software update version sound settings SPDIF standby troubleshooting subtitles language surround sound S Video T Table of Pages technical specifcations Teletext dual screen enlarge pages features menu search subpages table of pages teletext 2 5 use timer sleeptimer tint transmission troubleshooting treble troubleshooting tuner TV access DVB C and DVB T networks adjust v
10. Press D BACK to exit or press f amp Home to go back to the home menu Smart settings is also accessible via the Picture and sound experience bar see Use the picture and sound experience bar on page 15 Use settings assistant Use the settings assistant to guide you through the best picture and sound settings 1 2 3 4 5 When watching TV press ft Home The home menu appears Press the Navigation buttons to select Setup Press OK he Setup menu appears Press the Navigation buttons to select Picture gt Settings assistant Press OK L A message appears prompting you to start the settings assistant Press the Navigation buttons to select Start Press OK L gt Follow the on screen instructions to choose your preferred picture and sound settings Use the picture and sound experience bar Use the Picture and sound experience bar to access frequently used picture and sound settings All picture settings are available via the Picture menu see Manually adjust picture settings on page 15 All sound settings are available via the Soundlmenu see Adjust sound settings on page 17 1 When watching TV press OPTIONS L gt The options menu appears 2 Press the Navigation buttons to select Picture and sound The Picture and sound experience bar appears J Press the Navigation buttons to select a pic
11. at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones get set for digital V Digital UK the body leading the digital TV switchover will advise you when you need to re tune during the switchover If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by switchover and you won t need to re tune If you have any questions please contact your equipment supplier or call Digital UK on 0845 6 50 50 50 or visit www digitaluk co uk How to re tune To find out how to re tune your TV check this user manual for details If you do not re tune your channels when advised to do so by Digital UK you may lose some or all of your channels until you do re tune You should re tune your TV every few months to check for any new channels If you are missing any channels it may be that they are not available in your area or that your aerial needs upgrading When does switchover happen Copeland switches on October 17 2007 Visit us at digitaluk co uk Call us on 0845 6 50 50 50t t Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines Border A 2008 09 l t STV North Pd gt 4 A wy NS A
12. menu before selecting them Add a device to the home menu Connect and switch on devices before adding them to the home menu etm GUIDE Ad OPTIONS amp 1 Press Home L gt The home menu appears et Aum Add Watch TV Browse USB 57e FF your devices Setup 2 Press the Navigation buttons to select Add new device J Press OK L A message appears with Start selected prompting you to start the add new device guide 4 Press OK L gt Follow the on screen instructions to select the type of device and where it is connected When the guide is complete a new device icon is added to the home menu Ea Select a device via the source list MHEG 6 a predi fan ape DEMO SCENEA mum 1 Press SOURCE he source list appears 2 Press the Navigation buttons to select a device J Press OK to confirm your choice L The IV switches to the selected device Use teletext EM D Ea forego Ae AD DEMO SCENEA D m9 o avoid screen clutter remove devices from the home menu when they are no longer connected see Remove devices from the home menu on page 13 Select a device via the home menu oun Te enm Saco GUIDE OPTIONS vama 1 Press Home L gt The home menu appears 2 Press the Navigation b
13. on page 13 The following picture settings can be configured Depending on the format of the picture source some picture settings are not available e Settings assistant Use settings assistant to guide you through the best picture and sound settings e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas e Colour Adjusts colour saturation e Hue Compensates colour variations in NTSC encoded transmissions e Sharpness Adjusts the level of sharpness in image details e Noise reduction Filters and reduces noise in an image e Tint Adjusts the colour balance in an Image Note Before you adjust Custom tint select Tint gt Custom then press OK to enable the option e Custom tint Make a customised tint setting e Pixel Plus HD Pixel Precise HD Gives access to advanced picture settings e Dynamic contrast Automatically enhances contrast in an image e Dynamic backlight Adjusts the brightness of the TV backlight to match lighting conditions e MPEG artefact reduction Smoothes out transitions on digital pictures You can switch this feature on or off e Colour enhancement Makes colours more vivid and improves the resolution of details in bright colours You can switch this feature on or off e PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If
14. Press the Navigation buttons to select Setup J Press OK The Setup menu appears 4 Press the Navigation buttons to select Connect a USB storage device and Installation gt Clock gt Auto clock enter the content browser de du d piuevsetomadu iene 1 While the TV is on connect the USB device to the USB port on the side of appears your V 5 Press the Navigation buttons to select L he USB content browser appears g pp Automatic or Manual Press OK to confirm your choice L gt he clock mode is set Ef Music Enable or disable daylight saving If clock mode is set to Manual enable or disable daylight saving if required for your time zone 1 Inthe Clock menu press the Navigation buttons to select Daylight saving The Daylight saving menu appears ES 2 Press the Navigation buttons to select Daylight saving time or Standard time The USB content browser is also accessible by selecting Browse USB in the home menu J Press OK to confirm your choice e If you connect multiple USB storage devices L gt Daylight saving is enabled or disabled via a USB hub a message appears prompting you to select a device Press the Navigation buttons to select the device then press OK to confirm for your time zone View photos play music and 2 To exit from the USB content browser 9 press HOME watch video from a USB L gt The home menu appears Storage devi
15. channels to update your current channel list Select Re Update channels install channels to search 1 and store all channels again 5 Press OK L gt Follow the on screen instructions to complete channel update When the update is complete Done is selected and a list of added channels is displayed 6 Press OK The Installation menu appears Test digital reception If using digital broadcasts you can check the quality and signal strength of digital channels This allows you to reposition and test your antenna or satellite dish 1 Inthe Installation menu press the Navigation buttons to select Channel installation gt Digital Reception test gt Search 2 Press OK L gt The Search menu appears J Press e he Navigation buttons or Numeric buttons to manually enter the channel frequency e The Navigation buttons to select Search then press OK to automatically search for the next channel If the signal quality and strength Is poor reposition the antenna or satellite dish and retest 4 When complete press the Navigation buttons to select Done EN 35 English 5 Press OK The Installation menu appears Note e f you have further problems with the reception of your digital broadcast contact a specialised installer Change startup message settings Enable or disable messages that appear at the startup to indicate whether a channel or i
16. enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content e Light sensor Dynamically adjusts picture settings to match lighting conditions e Picture format Changes the picture format e Auto format mode Sets the picture format to automatically fill or automatically zoom into the screen Tip f Auto format mode is disabled select Picture format gt Auto format to enable the option e Picture shift Adjusts the position of the picture Colour and Contrast settings are also accessible via the Picture and sound experience bar see Use the picture and sound experience bar on page 15 Change picture format 1 Press FORMAT A list of picture formats appears Auto format Super zoom quu fux EM Movie expand 16 9 Eu ee Widescreen sins Unscaled 2 Press the Navigation buttons to select a picture format J Press OK to confirm your choice L The selected picture format is activated Tip Picture formats are also accessible via the Setuplmenu see Access the setup menu on page 13 The following picture formats can be selected Depending on the picture source some picture formats are not available and will not be seen on screen Before you adjust Unscaled select Picture gt PC mode gt On then press OK to enable the option Au
17. gt The IV speakers are set to EasyLink mode 5 Press OPTIONS to exit Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington lock between the slot and a permanent object such as a heavy table ae 8 Product Multimedia info rm ation e Supported storage device USB FAT or DOS formatted Mass Storage Class compliant only e Supported multimedia file formats e Images JPEG e Audio MP3 LPCM Video MPEG MPEG H264 MPEG 4 AVC Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Note e Multimedia file names must not exceed 128 Computer formats e Resolution refresh rate e 640 x 480 60Hz e 800 x 600 60Hz e 1024 x 768 60Hz e 1280 x 1024 60 Hz supported on characters Tuner Reception full HD TVs only Transmission e 1360 x 768 60Hz e 1600 x 1200 60Hz supported on e Antenna input 5ohm coaxial IEC75 full HD TVs only e V system DVB COFDM 2K 8K 1920x1080 60Hz e Video playback NTSC SECAM PAL Video formats e DVB T Digital Video Broadcasting e Resolution refresh rate Terrestrial and DVB C Digital Video A480 60Hz Broadcasting Cable See listed countries e 480p 60Hz on the back of the TV 5761 50Hz e 576p 50Hz 720p 50Hz 60Hz Remote control e 1080 50H
18. issues HDMI connection issues USB connection issues Computer connection issues Contact us 10 Index EN 32 22 28 24 35 36 37 37 39 40 41 42 42 44 45 43 a 45 is a 46 46 47 47 47 47 48 48 49 49 49 50 English Osterreich Belgie Belgique Bbarapna Hrvatska esk republika Danmark Estonia Suomi France Deutschland EAAada Magyarorszag Hrvatska Ireland Italia KasakcraH Latvia Lithuania Luxemburg Luxembourg Nederland Norge Polska Portugal Rom nia Poccua Cp6nja Slovensko Slovenija Espana Sverige Suisse Schweiz Svizzera Turkiye United Kingdom YkpaiHa 0810 000205 078250145 3592 489 99 96 01 6403 776 800142840 3525 8759 6008600 09 2311 3415 0821 611655 01803 386 852 0 0800 3122 1280 0680018189 0800 222778 North 0800 055 6882 South 1800 PHILIPS 7445477 840320086 7 727 250 66 17 52737691 67228896 40 6661 5644 0900 8407 2270 8111 022 3491504 800 780 903 031 810 71 25 0800 89 49 10 Moscow 495 961 1111 Outside Moscow 8 800 200 0880 381 114 440 841 0800 004537 00386 12 80 95 00 902 888 784 08 5792 9100 0844 800 544 0800 261 3302 General No 0870 900 9070 General National Rate No 0870 911 0036 8 800 500 69 70 Model Serial 0 07 pro Minute 0 06 Per minuut Par minute MecteH pasroBop Lokalni poziv Bezplatny hovor Lokalt opkald local paikallispuhelu 0 09 Par minute 0 09 pro
19. 8888 The TV menu is in the wrong language e Change the TV menu to your preferred language see Change language settings on page 12 When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance When the TV is in standby mode a startup splash screen is displayed then returns to standby mode e This is normal behavior The startup screen Is displayed when the TV ts disconnected from the mains and reconnected TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T DVB T Lite or DVB C in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the T V source There is sound but no picture e Check that the picture settings are correctly set EN 4 7 English There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence recept
20. Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels If required refer to documentation from your operator on how to Insert a smart card into the Conditional Access Module EN 41 English Insert and activate a CAM Caution e Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your T V 1 Switch off the TV 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV J Pushthe CAM in as far as it will go 4 Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services COMMON INTERFACE Access CAM services 1 After inserting and activating the CAM press OPTIONS L gt he options menu appears 2 Press the Navigation buttons to select Common interface Press OK L gt A list of CAM applications appears UJ Press the Navigation buttons to select a CAM application U A Press OK to confirm your choice The selected CAM application is enabled 42 EN Assign a channel decoder Before using a SCART digital channel decoder select the channel to decode and assign the decoder to EXT 1 or EXT 2 1 While watching TV press ft Home
21. Contents 1 Notice 2 2 Important 4 3 Your product 7 TV overview 7 4 Use your product 7 Switch your TV on off or to standby 2 Switch channels J Adjust TV volume 10 Watch connected devices 10 Use teletext 11 5 Use more of your product 12 Change language settings 12 Access the home menu 12 Access the options menu 13 Access the setup menu 15 Change picture and sound settings 14 Use advanced teletext features 18 Create and use lists of favourite channels 20 Reorder rearrange and rename channels 20 Hide and unhide channels 21 Use the Electronic Programme Guide 22 Use timers 23 Use child and rating locks 24 Use subtitles 25 Use the TV clock 26 View photos play music and watch video from a USB storage device 2 Listen to digital radio channels 29 Update the TV software 29 Change I V preferences 30 Start a TV demo 31 Reset the T V to factory settings 31 6 Install channels Automatically install channels Manually install channels Manually update the channel list Test digital reception Change startup message settings Connect devices Back connectors Side connectors Connect a computer Use a Conditional Access Module Assign a channel decoder Use Philips EasyLink Use a Kensington lock Product information Supported display resolutions Multimedia Tuner Reception Transmission Remote control Power Supported TV mounts EPG information Troubleshooting General TV issues TV channel issues Picture Issues Sound
22. Minute KArjon xwpig xpewon Ingyenes hivas free free 0 08 Al minuto local local local Ortsgesprach Appel local 0 10 Per minuut Lokalsamtale potaczenie lokalne Chamada local Apel local MectTHbINn 3BOHOK Lokalni poziv Bezplatny hovor lokalni klic 0 10 Por minuto Lokalsamtal Appel local Ortsgesprach Chiamata locale Sehirici arama local MicueBun BAKAMK This information is correct at the time of press For updated information see www philips com support 1 Notice 2009 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e he caution sign printed on the b
23. NEA an mm i ow GUIDE O OPTIONS OOG BACK D i Q3 Qi n D or Q H oe ot er ese FORMAT O X eX XQ 9 OO C3 9 2 09 2 3 C2 2 co IT z c Zs 1 o PHILIPS TELEVISION 1 Standby On e Switches the TV to standby if it is on e Switches on the TV if it is in standby EN 7 English Q OQ OO 96 CO MHEG TELETEXT Toggles teletext on or off SOURCE Selects connected devices Colour buttons Selects tasks or options AD Audio Descriptor UK only Enables audio commentary for the visually handicapped Not supported on all models f Home Toggles the home menu on or off OPTIONS Accesses options relating to the current activity or selection OK Confirms an entry or selection AY4b Navigation buttons Navigates through the menus INFO Displays programme information if available 4 Backward Searches backward gt gt Forward Searches forward gt IH Play Pause Starts pauses or resumes playback Record Starts or stops video recording m Stop Stops playback iK Mute Mutes or restores audio output P Programme Switches to the next or previous channel FORMAT Selects a picture format EN QD 0 9 Numeric buttons Selects a channel or setting C PICTURE L aunches the picture menu Not supported on all models
24. No Yes Yes Yes Yes Yes Yes Yes No Yes Yes No Yes Yes Yes Yes 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The TV does not respond to remote control or side controls when switched on e When the TV is switched on the front LED indicator flashes for about 20 to 25 seconds his is normal behaviour During this time the T V will not respond to the remote control or side controls When a picture appears on screen the TV responds only to the following remote control buttons for the first few seconds lt VOLUME P Program amp K MUTE and O Standby On All buttons can be used when the front LED indicator stops flashing The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature e Enter
25. ack of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Open source software This television contains open source software Philips hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange This offer is valid for a period of 3 years after the date of purchase of this product To obtain the source code write to Development Manager Technology amp Development Philips Consumer Lifestyle 620A Lorong 1 Toa Payoh TP evel Singapore 319 62 Compliance with EMF Koninklijke Philips Electronics N V ma
26. and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating Never install the T V in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the T V Risk of damage to the TV Before you connect the T V to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e o easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are Images that r
27. avigation buttons to select Installation gt Channel installation gt Analogue Manual installation gt Fine tune Press OK The Fine tune menu appears Press the Navigation buttons or Numeric buttons to manually enter the channel frequency When the correct channel frequency is selected press the Navigation buttons to select Done then press OK The Analogue Manual installation menu appears Press the Navigation buttons to select Store current channel to store the new channel under the current channel 10 Press OK to confirm your choice Manually update the channel list If your TV is in standby mode an update is performed every morning This update matches channels stored in your channel list with those available from your broadcaster In addition to this automatic update you can manually update the channel list Ea To disable the automatic update in the Installation menu press the Navigation buttons to select Channel installation gt Channel update in standby then select Off 1 Inthe Installation menu press the Navigation buttons to select Channel installation gt Automatic installation 2 Press OK L A message appears with Start selected prompting you to start the channel update J Press OK The channel update screen appears 4 Press the Navigation buttons to select Update channels Select Update channels Re install
28. ce Watch a slideshow of your photos Caution 1 Inthe USB content browser press the Philips is not responsible if the USB storage Navigation buttons to select a photo device is not supported nor is it responsible for damage or loss of data from the device 2 Press P M or OK L gt A slideshow begins from the selected Your TV is fitted with a USB connector that image enables you to view photos listen to music or 3 Press watch movies stored on a USB storage device l PIE to pause the slideshow e lt gt 44 gt or P to go back or move forward to the next image e Mito stop the slideshow and return to the USB browser EN 27 English Change slideshow settings 1 When viewing a slideshow press OPTIONS The options menu appears Press the Navigation buttons to select and adjust e Rotate Rotates a picture e Repeat Repeats the slideshow e Shuffle on Displays pictures in the slideshow at random e Shuffle off Disables random display of pictures in the slideshow e Slideshow speed Sets the amount of time that a picture is shown e Slideshow transition Sets the transition from one picture to the next Press OK to confirm your choice L gt The slideshow setting is applied Listen to music 1 2 28 In the USB content browser press the Navigation buttons to select a song Press OK The song starts to play in the music player Press e P to skip to the n
29. ce bar and other useful features such as Status The Status menu gives you an overview of current TV English you to change picture sound and information other TV settings 1 when watching TV press OPTIONS e Add new device Adds new devices L The options menu appears to the home menu e Browse USB If a USB storage device is connected accesses the p USB content browser Visually impaired Volume Visually impaired J Press OK to confirm your choice Tere E Press f Home at any time to exit the home Mark as favourite Common interface menu Clock Press gt BACK at any time to exit the Setup menu Press OPTIONS at any time to exit an options menu E s E LI v i p E z aei 2 Press the Navigation buttons to select an A a aa aS option Remove devices from the home menu 3 Press OK If a device is no longer connected to the TV L gt The menu of the selected option remove it from the home menu appears 1 Prset Home L gt The home menu appears Access the setup menu 2 Press the Navigation buttons to select a device to remove 3 Press OPTIONS The Setup menu gives you access to picture A list appears with Remove this sound and other IV settings device selected d Press Home Ly The home menu appears 4 Press OK i L A message appears prompting you to remove the device D Press OK L The home menu ap
30. ces such as satellite receivers S VIDEO 0 A Stereo audio output to headphones or earphones 5 COMMON INTERFACE Slot for a Conditional Access Module CAM 6 USB Data input from USB storage devices 7 HDMI Digital audio and video input from high definition digital devices such as Blu ray players SERV U For use by service personnel only Connect a computer Before you connect a computer to the TV e Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer e Enable PC mode in the Picture menu see Manually adjust picture settings on page 15 and set the picture format to Unscaled Connect a computer with one of the following connectors Note Connections via DVI or VGA require an additional audio cable HDMI cable 12 oo USB 40 EN e DVI HDMI cable rear HDMI and AUDIO IN AUDIO IN LEFT RIGHT HDMI I DVI HDMI 2 DVI HDMI 3 DVI VGA e DVI HDMI cable side HDMI and AUDIO IN L R e HDMI cable and HDMI DVI adaptor rear HDMI and AUDIO IN AUDIO IN LEFT RIGHT HDMI DVI HDMI 2 DVI HDMI 3 DVI VGA e HDMI cable and HDMI DVI adaptor side HDMI and AUDIO IN L R e VGA cable AUDIO IN LEFT RIGHT HDMI DVI HDMI 2 DVI HDMI 3 DVI VG Use a
31. cted device to adjust the volume Remote control RC key forwarding RC key forwarding allows you to control EasyLink compliant devices using your T V remote control EasyLink buttons You can control EasyLink compliant devices with the following buttons on the remote control of your T V Button EasyLink function gt II Play Starts pauses or resumes Pause playback on your EasyLink device B Stop Stops playback on your EasyLink device o Starts or stops video recording Record on your EasyLink device lt lt Searches backward on your Previous EasyLink device mm Next Searches forward on your EasyLink device 0 9 When EasyLink is enabled Numeric selects a title chapter or track buttons Ava Navigates through the menus of Navigation your EasyLink devices buttons OK Activates a selection or accesses the menu of your EasyLink device E Displays the menus of your OPTIONS FasyLink device Note that when Home is pressed the TV menu is displayed TV Switches back to the antenna source from EasyLink mode O Standby When EasyLink is enabled On switches the TV and all EasyLink devices to standby Note that you must press and hold Standby On for at least 3 seconds for this to occur EN 43 English Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it When watching TV press Home L The home menu app
32. e A list of subtitle languages appears D Press the Navigation buttons to select a language 6 Press OK to confirm your choice The subtitle language is applied e Select preferred subtitle languages in the Languages menu Subtitles automatically appear in the preferred languages when enabled 26 EN Use the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock You can display a clock on the T V screen displaying the current time 1 when watching T V press OPTIONS The options menu appears 2 Press the Navigation buttons to select Clock J Press OK to confirm your choice he clock displays on the TV screen Note To disable the clock repeat the procedure above Tip The clock is also accessible via the Setup menu see Access the setup menu on page 13 Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual If clock mode is Manual time data is based on your current time zone see Step 1 Select your system on page 33 and daylight saving conditions see Enable or disable daylight saving on page 27 1 when watching T V press Home L gt The home menu appears 2
33. e home menu appears 2 Press the Navigation buttons to select Setup J Press OK The Setup menu appears 24 EN 4 Press the Navigation buttons to select Features gt Child lock gt Lock Unlock L A message appears prompting you to enter the child lock code 5 Enter the child lock code with the Numeric buttons The Child lock menu appears 6 Press the Navigation buttons to select Lock Unlock Press OK to confirm your choice Ly All channels and connected devices are locked or unlocked 8 Press gt BACK to exit or press amp Home to go back to the home menu Enable parental ratings Note Parental rating is not available in all countries Some digital broadcasters rate their programmes according to age Before you can set parental ratings you have to enable the feature 1 when watching T V press Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Features gt Child lock then press L A message appears prompting you to enter the child lock code 5 Enter the child lock code with the Numeric buttons 6 Press the Navigation buttons to go back one menu level to Features gt Parental rating The Parental rating menu is now available Set parental ratings You can set your TV to display only programmes with age ratin
34. e mix of visually impaired audio with regular audio When available visually impaired audio includes audio descriptions of on screen action You can also enable this by pressing AD Audio Descriptor EN 17 English e Audio language Digital channels only Selects between audio languages when multiple languages are broadcast e Duall Il Analogue channels only Selects between audio languages when dual sound is broadcast Mono Stereo Selects between mono or stereo if stereo is broadcast TV speakers Turns on or off TV speakers If Automatic EasyLink is selected the T V speakers are switched off when content from an EasyLink compliant home theater system Is detected e Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Delta volume Levels out volume differences between channels or connected devices Switch to the connected device before you change the delta volume e Balance Adjusts the balance of the right and left speakers to best suit your listening position e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels When enabled this produces a more consistent audio volume Bass Treble and TV speakers settings are also accessible via the Picture and sound experience bar see Use the picture and sound experience bar on page 15 When supported Audio language and Volume Visually impaired are d
35. ears 2 Press the Navigation buttons to select Setup L The Setup menu appears J Press the Navigation buttons to select Installation gt Preferences gt EasyLink The EasyLink menu appears Select On or Off Press OK to confirm your choice L gt EasyLink is enabled or disabled Un A Enable or disable remote control key forwarding Note Enable EasyLink before enabling remote control key forwarding 1 When watching TV press ft Home L The home menu appears N Press the Navigation buttons to select Setup The Setup menu appears UJ Press the Navigation buttons to select Installation gt Preferences gt EasyLink Remote Control 4 Select On then press OK RC key forwarding is enabled or disabled on the selected HDMI connector Note e f you cannot exit from a device s menu press OPTIONS then OK 44 EN Set TV speakers to EasyLink mode When enabled this feature automatically turns off TV speakers when content from an EasyLink compliant home theatre system Is played Audio is played only from the home theatre system s speakers 1 When watching content from an EasyLink device press OPTIONS The options menu appears 2 Press the Navigation buttons to select TV speakers The TV speakers menu appears J Press the Navigation buttons to select Automatic EasyLink 4 Press OK to confirm your choice L
36. efore adding a channel to a favourite list When watching TV switch to the channel you want to add or remove from a favourite list Alternatively press OK to enter the channel grid and press the Navigation buttons to select the channel to add or remove Q Press OPTIONS L The options menu appears J Pressthe Navigation buttons to select Mark as favourite or Unmark as favourite L gt A star appears in the channel grid indicating that the channel is added to the favourite list The star disappears if you chose to remove the channel from the favourite list Reorder rearrange and rename channels Reorder rearrange channels Reorder rearrange channels in the grid to your desired location 1 when watching TV press OK The channel grid appears Q Press OPTIONS L The options menu appears J Pressthe Navigation buttons to select Reorder then press OK L gt An on screen message appears To continue go to step 4 e To cancel and exit press OPTIONS and follow the on screen instructions 4 Press the Navigation buttons to select the channel to reorder in the grid A box appears around the selected channel D Press the Navigation buttons to move the channel to the desired location in the grid 6 Press OK to confirm your choice he channel is moved to the selected location Press 9 BACK to exit the channel grid Rename channels Rename channels i
37. emain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e o avoid deformations and colour fading wipe off water drops as soon as possible Disposal of your old product and batteries c Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol Is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correc
38. es e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain Is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the T V e wo people are required to lift and carry a TV that weighs more than 25 kg e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the T V and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the T V on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the T V hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture
39. es not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the HDMI CEC enabled EasyLink compliant HTS device Sound should be heard from the HTS speakers There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP support can delay the time taken for a TV to display content from a HDMI device e fthe TV does not recognize the HDMI device and no picture Is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features e Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If a HDMI CDC EasyLink compliant audio device is connected to the TV and the TV does not display any mute or volu
40. ext or previous song e to fast forward or rewind a song e PII to play or pause a song Press BM or OK to stop play and exit to the USB content browser EN Change music settings 1 When in the music player press OPTIONS The options menu appears Press the Navigation buttons to select and adjust e Repeat Repeats a song or an album e Shuffle on Shuffle off Enables or disables random play of songs Press OK to confirm your choice L The music setting is applied View a slideshow of your photos with music You can view a slide show of your photos with background music 1 After selecting a song to play see Listen to music on page 28 press GUIDE L gt The USB content browser appears Start a photo slideshow see Watch a slideshow of your photos on page 27 Watch video 1 2 In the USB content browser press the Navigation buttons to select a video Press OK L gt The video starts to play in the video player Press e P to skip to the next or previous video e lt gt P to fast forward or rewind a video e PIE to play or pause a video Press BM or OK to stop play and exit to the USB content browser Change video settings 1 When in the video player press OPTIONS The options menu appears 2 Press the Navigation buttons to select and adjust e Small screen Plays video in a small screen e Full screen Plays video across the who
41. gs higher than your child s age Before you can set parental ratings you have to enable the feature see Enable parental ratings on page 24 1 when watching TV press Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Features gt Parental rating L A message appears prompting you to enter the child lock code 5 Enter the child lock code with the Numeric buttons 6 Press the Navigation buttons to select an age rating then press OK to apply the setting All programmes beyond the selected age rating are blocked Press 9 BACK to exit or press amp Home to go back to the home menu Use subtitles You can enable subtitles for each T V channel Subtitles are broadcast via teletext or DVB T digital broadcasts With digital broadcasts you have the additional option of selecting a preferred subtitle language Enable or disable subtitles on analogue TV channels Switch to an analogue T V channel Press MHEG TELETEXT Enter the three digit page number of the subtitle page with the Numeric buttons Press MHEG TELETEXT to switch off teletext Press SUBTITLE The Subtitles menu appears U1 Lk WN The Subtitles menu is also accessible through the Setup menu Pressthe Navigation buttons to select e On Enables subtitles e Off Disables sub
42. he Navigation buttons to navigate the screens Press G INFO to exit back to the original channel or press BACK to exit to the EPG menu Use the EPG options menu Use the EPG options menu to set or clear reminders change day and access other useful EPG options Note The EPG options are only accessible for 8 days of TV channel information 1 When in EPG press 2 OPTIONS L The EPG options menu appears Clear reminder Change day More info Search by genre Scheduled reminders Preferred channels 2 Press the Navigation buttons and OK to select and adjust e Set reminder Sets programme reminders e Clear reminder Clears programme reminders e Change day Sets the EPG day Select Today Next day or Previous day e More info View programme information e Search by genre Searches TV programmes by genre e Scheduled reminders Lists programme reminders e Preferred channels Sets preferred EPG channels 3 Press OPTIONS to exit to the EPG options menu Use timers You can set timers to switch the T V to standby at a specified time Automatically switch the TV to standby sleeptimer Sleeptimer switches the T V to standby after a pre defined period of time Tip You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 when watching T V press Home The home menu appears 2 Press the Nav
43. ied Start a TV demo Not supported on MHEG channels 1 2 3 4 When watching TV press DEMO The demo menu appears Press the Navigation buttons to select a demo Press OK to start the demo Press DEMO or BACK to exit the demo Reset the TV to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 2 When watching TV press ft Home L The home menu appears Press the Navigation buttons to select Setup L The Setup menu appears Press the Navigation buttons to select Installation gt Factory reset Press OK TV settings are reset back to the factory default EN 31 English 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to re install and fine tune channels Automatically install channels This section describes how to search and store channels automatically Install channels Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels 1 Inthe Channel installation menu press the Navigation buttons to select Automatic installation 2 Press OK L A message appears prompting you to start channel installation Languages Automatic insta
44. igation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Features gt Sleeptimer The Sleeptimer menu appears D Press the Navigation buttons to set the sleep time The sleep timer can be up to 180 minutes in steps of five minutes The sleep timer is switched off if set to zero minutes 6 Press OK to activate the sleeptimer L The TV switches to standby after the set period of time 7 Press 9 BACK to exit or press amp Home to return to the home menu EN 23 English Use child and rating locks You can prevent your children from watching TV by locking the TV and using age ratings Set or change the child lock code 1 When watching TV press ft Home L The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Features gt Set code Change code The Set code Change code menu appears 5 Enter the code with the Numeric buttons 6 Press OK L A message appears confirming that your code Is set Press 9 BACK to exit or press amp Home to go back to the home menu Tip f you forget your code enter 8888 to override any existing codes Lock or unlock the TV Locking the TV prevents your child from accessing all channels and connected devices 1 when watching TV press Home L gt Th
45. ion quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e ry using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled e You may need to use a Conditional Access Module to access content Check with your operator An e sticker banner displaying information appears on the TV display e The TV isin Shop mode Remove the e sticker by setting the TV to Home mode In the Home menu select Setup gt Installation gt Preferences gt Location menu It is necessary to switch the TV to standby to ensure that the TV exits Shop mode completely 48 EN Sound issues There is a picture but sound quality is poor Note f no audio signal is detected the TV automatically switches the audio output off this do
46. irectly accessible from the options menu Use advanced teletext features Access the teletext options menu Most of the advanced teletext features are accessed via the teletext options menu 1 Press MHEG TELETEXT The teletext screen appears 2 Press OPTIONS The teletext options menu appears Dual screen Reveal Cycle subpages Language J Press the Navigation buttons to select an option e Freeze page Freezes the current page Dual screen Full screen Enables and disables dual screen teletext which splits the current channel or source to the left of the screen with teletext on the right e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e Cycle subpages Cycles through subpages automatically if subpages are available e Language Switches to a different language group to display a language correctly when that language uses a different character set 4 Press OK to confirm your choice The teletext screen appears Tip Press OPTIONS at any time to exit the options menu Select teletext subpages A teletext page can hold several subpages Subpages are displayed on a bar next to the main page number Note Enable cycling of subpages before selecting subpages see Access the teletext options menu on page 18 1 Press MHEG TELETEXT The teletext screen appears Select a teletex
47. l Secondary teletext Frangais Hearing impaired Hrvatski LE e Primary audio Secondary audio Select primary and secondary audio languages for digital channels e Primary subtitles Secondary subtitles Select primary and secondary subtitle languages for digital channels e Primary teletext Secondary teletext Select primary and secondary teletext languages for digital channels e Hearing impaired Select On to display subtitles with primary and secondary audio languages e Visually impaired If available select to hear additional audio commentary for the visually impaired through the options Speakers Headphones or Speakers headphones Select Off to disable the feature Preferred audio format Select Advanced for best sound reproduction from home theatre systems Select Standard for best sound reproduction from the TV speakers and basic sound systems Access the home menu The home menu gives you easy access to connected devices picture and sound settings as well as other useful features 1 Press Home L gt The home menu appears lt Add E we your devices Watch TV Browse USB 2 Press the Navigation buttons to select a home menu Item e Watch TV Switches back to the aerial source if another source is selected e Setup Accesses menus that allow Access the options menu The options menu gives you quick access to the picture and sound experien
48. le screen e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos J Press OK to confirm the setting change Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB storage device Press HOME to exit the USB content browser 2 Wait five seconds before disconnecting the USB storage device Listen to digital radio channels If digital broadcasting is available digital radio channels are installed automatically during installation 1 when watching T V press OK he channel grid appears Q Press OPTIONS L The options menu appears J Pressthe Navigation buttons to select Select list The Select list menu appears 4 Pressthe Navigation buttons to select Radio D Press OK L gt A list of available digital radio channels appears in the channel grid 6 Press the Navigation buttons to select a radio channel 7 Press OK The selected digital radio channel plays through the TV speakers Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Check www philips com support for availability Check the current software version 1 when watching T V press ft Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 P
49. llation Channel installation Channel update message Preferences Standby channel update Update your current channel list or Re install all channels Factory reset J Press the Navigation buttons to select Start 4 Press OK The channel update screen appears with Re install channels selected 32 EN Select Update channels to update your current m channel list Select Re Update channels install channels to search and store all channels again Caution eave Settings unchanged unless your DVB C provider supplies values for Network frequency Network ID or Symbol rate e Setting Frequency scan to Full scan can extend installation time significantly f you have access to DVB T and DVB C and want to view channels from both networks you must perform channel installation twice once for DVB T and once for DVB C Select Antenna to install DVB T channels and select Cable to install DVB C channels e To switch between DVB T and DVB C channels see Access DVB C and DVB T channel networks on page 33 D Press OK Follow the onscreen instructions to complete channel installation When channel installation is complete Done is selected and a list of installed channels appears Press OK to confirm your choice L The TV exits to the Channel installation menu E e When digital TV channels are found the list of installed channel
50. me icon when the volume is muted increased or decreased e his behavior is normal when a HDMI CEC EasyLink compliant device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the T V e Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly e The transfer performance of the USB storage device may limit the data transfer rate to the T V causing poor playback Computer connection issues The computer display on the TV is not stable e Check that a supported resolution and refresh rate is selected on the computer e Setthe TV picture format to unscaled Contact us If you cannot resolve your problem refer to the FAQs for this T V at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in this user manual Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 49 English 10 Index A analogue channel fine
51. n the grid to suit your needs 1 when watching TV press OK he channel grid appears 2 Press the Navigation buttons to select a channel to rename 3 Press OPTIONS L The options menu appears 4 Pressthe Navigation buttons to select Rename L gt An entry screen appears D Press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once complete press the Navigation buttons to select Done To clear the name entered select Clear e To cancel select Cancel Press OK to confirm your choice B Press gt BACK to exit the channel grid Hide and unhide channels Hide channels Hide channels from the grid to prevent unauthorised access 1 when watching T V press OK The channel grid appears 2 Press the Navigation buttons to select a channel to hide J Press OPTIONS The options menu appears 4 Press the Navigation buttons to select Hide channel D Press OK to confirm your choice L gt he channel is hidden 6 Press gt BACK to exit the channel grid Unhide channels Display hidden channels When watching T V press OK The channel grid appears Q Press E OPTIONS L The options menu appears J Pressthe Navigation buttons to select Show hidden channels 4 Press OK L gt Hidden channels appear in the channel grid but without channel information displayed It is displayed as a black box EN 21 English Switch on EPG Note
52. nstallation update is needed 1 Inthe Installation menu press the Navigation buttons to select Channel installation gt Channel update message Press OK Press the Navigation buttons to select On or Off L gt Startup messages are enabled or disabled GJ NY 36 EN 7 Connect devices For best picture quality we recommend you use the following connection types listed below from highest to basic quality 1 HDMI 2 YPbPr component 3 SCART 4 VIDEO composite Note The connectivity diagrams provided in this section are examples only Other types of connections are possible Back connectors ion AUDIO SPDIF EXT 2 EXT r 0OUT OUT RGB CVBS RGB CVBS R L S U AUDIO IN LEFT RIGHT HDMI DVI HDMI 2 DVI His HDMI 3 DVI VGA O i i EXT 3 1 HDMI 2 HDMI I 750 r R L Pr Ph Y UD 9 Back connectors on 19 22 models vary slightly from the diagram The number of HDMI connectors available varies according to T V model EN 37 English 1 EXT 1 EXT 2 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT RGB CVBS m Em mu GLI Ci OLI ma OLI OL OL 2 SPDIF OUT Digital audio output to home theatres and other digital audio systems 4 VGA Video input from a computer 5 AUDIO IN
53. nufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles Is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type J Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable
54. olume connectors menu screen care software speakers standby switch channels 52 39 30 23 14 27 29 17 37 47 26 T 39 19 Aa 18 12 18 18 19 19 12 19 11 23 15 47 17 47 45 33 10 34 12 27 MO switch off switch on troubleshooting tuner technical specifications wall mount V VGA videos supported formats watch visually impaired volume adjust headphones visually impaired 47 45 3 4 28 17 10 17 17 Information about how to re tune your TV during the TV switchover Keep this user manual safe you ll need it pam o n Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover
55. on buttons to select Setup J Press OK The Setup menu appears 4 Pressthe Navigation buttons to select Installation gt Preferences gt Teletext 2 5 gt On or Off L gt Teletext 2 5 is enabled or disabled D Press 9 BACK to exit or press amp Home to go back to the home menu EN 19 English Create and use lists of favourite channels You can create lists of your preferred TV channels so that you can find those channels easily Note Digital radio stations can also be added to favourite lists if supported View only channels in a favourite list or view all channels if a favourite list is currently selected 1 when watching T V press OK he channel grid appears Q Press OPTIONS L The options menu appears Select list Mark as favourite Reorder Rename Show hidden channels Hide channel J Press the Navigation buttons to select Select list 4 Press OK The Select list menu appears D Press the Navigation buttons to select All Displays all channels e Favourites Displays channels in a selected favourite list e Radio Displays radio channels only e Digital Displays digital channels only e Analogue Displays analogue channels only 6 Press OK to confirm your choice The selected list is applied to the channel grid 20 EN Add or remove channels from a favourite list Tip e Select All channels b
56. or available software updates via digital broadcasts U A 30 EN Change TV preferences 1 when watching T V press Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Installation gt Preferences The Preferences menu appears Languages Location Channel installation Volume bar Preferences Channel information Decoder EasyLink 5 Clock EasyLink Remote Control Factory reset Pixel Plus link LightGuide brightness Teletext 2 5 D Press the Navigation buttons to select and change e Location Optimises TV settings for your location home or shop e Volume bar Displays the volume bar when adjusting the volume e Channel information Displays information about the TV channel every time you switch channels e EasyLink Enables one touch play and one touch standby between EasyLink compliant devices e EasyLink Remote Control VVhen EasyLink is enabled allows remote control key forwarding e Pixel Plus link When EasyLink is enabled automatically applies the best Pixel Plus setting if there is more than one for example if both your TV and DVD player support Pixel Plus e LightGuide brightness Sets the brightness of the front LED indicator or LightGuide e Teletext 2 5 Enables or disables Teletext 2 5 6 Press OK L gt The TV preference is appl
57. pears with the device removed 2 Press the Navigation buttons to select Setup J Press OK The Setup menu appears EN 13 Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually The flexibility to change settings is limited if the TV location Is set to Shop mode Set the TV location to Home mode to access all T V settings see Change T V preferences on page Use smart settings Use smart settings to apply pre defined picture and sound settings 1 when watching TV press ft Home L The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears 4 Press the Navigation buttons to select Smart settings D Press OK L gt A list of smart settings appears Personal Vivid Natural Cinema Game Standard 14 EN 7 8 Press the Navigation buttons to select e Personal Sets the TV to your personal preferences set in the Picture and Sound menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema ldeal settings for watching movies e Game ldeal settings for gaming e Standard The most energy conscious settings Factory standard settings Press OK to confirm your choice L he smart setting is applied
58. ressthe Navigation buttons to select Software update gt Current software info D Press OK L The version of the current software is displayed EN 29 English Update software from website Before performing this procedure be sure to e Set aside some time to complete the entire update e Have available a USB storage device with at least 256MB of storage space e Have access to a computer with a USB port and internet access 1 when watching TV press ft Home L The home menu appears 2 Press the Navigation buttons to select Setup Press OK L The Setup menu appears UJ Press the Navigation buttons to select Software update gt Update now Press OK The update assistant starts Follow the on screen instructions to complete the update U A Update software digital broadcasts Only available in some countries If available your TV can receive software updates via digital broadcasts If an update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted Follow the instructions below to update the software at a later stage 1 when watching TV press ft Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK L The Setup menu appears Press the Navigation buttons to select Software update gt Local updates Press OK L gt The IV searches f
59. s may display empty channel numbers You can rename reorder or uninstall stored channels as described below Access DVB C and DVB T channel networks This option appears only if your country supports DVB C Digital Video Broadcasting Cable If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network NA GUIDE t OPTIONS KA tan 1 when watching TV press t Home L The home menu appears 2 Press the Navigation buttons to select Setup The Setup menu appears J Press the Navigation buttons to select Installation gt Channel installation gt Antenna or Cable DVB gt Antenna or Cable e Select Antenna to access DVB T Digital Video Broadcasting Terrestrial channels e Select Cable to access DVB C Digital Video Broadcasting Cable channels Press OK to confirm your choice Press gt BACK to exit L The IV switches to the selected network UI A Manually install channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note e Skip this step if your system settings are correct When watching TV press ft Home L gt The home menu appears 2 Press the Navigation buttons to select Setup The Setup menu appears J Press the Navigation buttons to select Installation gt Channel installation
60. t disposal helps to prevent negative consequences for the environmental and human health EN 5 English ECO Green EUROPEAN UNION ECOLABEL x x x x T t y Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 e High energy efficiency e Low standby power e Designed to facilitate recycling Philips continuously focuses on lowering the environmental impact of its innovative consumer products We aim our efforts towards environmental improvements during manufacturing reduction of harmful substances energy efficient use end of life instructions and product recycling Thanks to our environmental effort this TV has been awarded the European Ecolabel the flower www ecolabel eu You can find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV on the Philips website for your country at www philips com This TV has features that contribute to energy efficient use This TV was awarded the European Ecolabel for its environmental qualities Energy efficiency features e Ambient light sensor To save energy the built in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens e Energy saving The energy saving setting of the TV combines several TV settings that result in saving energy See the smart settings In the setup menu e Low standby po
61. t page GJ NY Press 4 or gt to select a subpage The subpage appears Select T O P teletext broadcasts Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers T O P teletext is not broadcast on all T V channels 1 Press MHEG TELETEXT The teletext screen appears 2 Press INFO L gt The LOP overview appears J Pressthe Navigation buttons to select a subject 4 Press OK to confirm your choice The teletext page appears Search teletext Search a teletext page by subject or word 1 Press MHEG TELETEXT The teletext screen appears Press OK to highlight the first word or number Press the Navigation buttons to skip to the word or number to search Press OK to begin the search MR W N Press A until no word or number is highlighted to exit the search Enlarge teletext pages For more comfortable reading you can enlarge the teletext page 1 Press MHEG TELETEXT The teletext screen appears 2 Press FORMAT The teletext screen is enlarged J Press e AY to scroll up and down the enlarged screen e 39 FORMAT to return to normal screen size Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 Is broadcast by a channel it is switched on by default 1 when watching T V press OPTIONS L gt The options menu appears 2 Press the Navigati
62. titles e On during mute Displays subtitles only when audio is muted Press OK to confirm your choice L gt Subtitles are enabled or disabled 8 Press gt BACK to exit or press ft Home to go back to the home menu Repeat this procedure to enable subtitles on each analogue channel e If EasyLink is enabled subtitles are not displayed when On during mute is selected see Enable or disable EasyLink on page 44 Enable or disable subtitles on digital TV channels 1 Press SUBTITLE The Subtitles menu appears Note he Subtitles menu is also accessible via the Setuplmenu see Access the setup menu on page 13 EN 25 English 2 Press the Navigation buttons to select e On Enables subtitles e Off Disables subtitles e On during mute Displays subtitles only when audio is muted 3 Press OK L gt Subtitles are enabled or disabled 4 Press gt BACK to exit or press f Home to go back to the home menu Select a subtitle language on digital TV channels When you select a subtitle language on a digital T V channel as described below the preferred subtitle language set in the installation menu is temporarily overruled 1 when watching TV press ft Home The home menu appears 2 Press the Navigation buttons to select Setup J Press OK The Setup menu appears 4 Press the Navigation buttons to select Features gt Subtitle languag
63. to format Enlarges the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC Super zoom Removes the black bars on the sides of 4 3 broadcasts Not recommended for HD er PQ Movie expand 16 9 Scales the classic 4 3 format to 16 9 Not recommended for HD Or PC Wide screen Stretches the classic 4 3 format to 16 2 Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Adjust sound settings 1 Press SOUND L gt The Sound menu appears Smart settings Picture Treble Sound Volume Features Volume Visually impair Installation Audio language Software update Dual I TI Mono Stereo TV speakers 2 Press the Navigation buttons and OK to select and adjust a sound setting 3 Press gt BACK to exit The Sound menu is also accessible via the Setuplmenu see Access the setup menu on page 13 The following sound settings can be configured Depending on the broadcast some sound settings may not be available e Bass Adjusts the bass level e Treble Adjusts the treble level e Volume Adjusts the volume Before you adjust Volume Visually impaired enable Visually impaired When watching TV press OPTIONS and select Visually impaired Select a preferred option and press OK e Volume Visually impaired Sets th
64. tune 34 audio balance quf audio language17 auto volume leveling 17 B bass 17 batteries 45 47 bracket 46 Brightness 15 C cables quality 37 CAM see also Conditional Access Module 41 channel decoder 42 channel grid access and change channels 10 channels channel grid hide channels 21 rename channels 21 reorder rearrange channels 20 favourite list 20 install automatic 32 manual 33 test reception 35 tune 34 child lock TV lock 24 clock 26 colour 15 Common Interface 4 39 composite cable 37 computer format technical specifications 45 Conditional Access Module dbi connections 50 EN component composite HDMI overview quality SCART S video technical specifications troubleshooting USB connectors overview USB USB contrast D demo devices add to home menu connect remove from home menu watch digital channel subtitle language test reception digital radio digital services CAM teletext display resolution Dual I II DVB C and DVB T access E EasyLink buttons disable enable features RC key forwarding TV speakers environmental care 19 3 7 59 39 37 3 3 22 45 49 2 27 37 27 15 37 10 37 13 10 26 35 2 A 18 45 17 35 43 44 44 43 44 44 F factory settings favourite list create troubleshooting H HDMI cable connectors troubleshooting headphone volume Home menu access remove devices hue install channels automatic manual
65. ture or sound setting to adjust 4 Press OK he picture or sound setting menu appears D Press the Navigation buttons to adjust the picture or sound setting 6 Press OK to confirm your choice L gt The picture or sound setting is applied and the Picture and sound experience bar reappears 7 Press gt BACK to exit The following settings can be configured via the Picture and sound experience bar e Smart settings Applies pre defined picture and sound settings e Colour Adjusts colour saturation e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged Bass Adjusts the bass level e Treble Adjusts the treble level e TV speakers Turns on or off TV speakers If Automatic EasyLink is selected the TV speakers are switched off when content from an EasyLink compliant home theater system is detected Note Bass and Treble are not available if TV speakers are set to Off Manually adjust picture settings 1 Press O PICTURE he Picture menu appears Smart settings Settings assistant Sound Brightness oe Picture Features Colour Installation Hue Software update Sharpness Noise reduction Tint 2 Press the Navigation buttons and OK to select and adjust a picture setting EN 15 English 3 Press gt BACK to exit Tip he Picture menu is also accessible via the Setuplmenu see Access the setup menu
66. uttons to select a device J Press OK to confirm your choice L The IV switches to the selected device 1 Press MHEG TELETEXT The teletext screen appears 2 Selecta page by e Entering the page number with the Numeric buttons e Pressing P or the Navigation buttons to view the next or previous page e Pressing the Colour buttons to select a colour coded item e Pressing gt BACK to return to a previously viewed page 3 Press MHEG TELETEXT to exit teletext EN 11 English 5 Use more of your product Change language settings Note e Skip this step if your language settings are correct When watching TV press ft Home L The home menu appears 2 Press the Navigation buttons to select Setup The Setup menu appears J Press the Navigation buttons to select Installation gt Languages gt Menu language L gt A list of languages appears 4 Press the Navigation buttons to select a menu language D Press OK to confirm your choice he selected language is applied to the menu In addition to Menu language you can configure the following language settings via the Languages menu digital channels only Languages Menu language Cestina Channel installation Primary audio Dansk Preferences Secondary audio Deutsch Decoder Primary subtitles EAAnvikke amp Clock Secondary subtitles English Factory reset Primary teletext Espa o
67. wer consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality Power management The advanced power management of this TV ensures the most efficient use of its energy You can check how your personal TV settings the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption Press DEMO then select Active Control and press OK Your current TV setting is highlighted You can change to another setting to check the corresponding values 3 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome TV overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators 66 6 og G x e E of 1 POWER Switches the product on or off The product is not powered off completely unless it is physically unplugged P CH Switches to the next or previous channel SOURCE Selects connected devices VOLUME Increases or decreases volume Front LED indicator LightGuide Available only on PFL 864H models eo GO Remote control MHEG a v fustme source DEMO _ SCE
68. z 60Hz 1080p 24Hz 25Hz 30Hz 50Hz e Type PFO3EO9B PFO2EO9B PFO2EO9W 60Hz e Batteries 2 x AAA LRO3 type Power e Mains power AC 220 240 50Hz e Standby power lt 0 15W e Ambient temperature 5 to 35 degrees Celsius EN 45 English Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 2 2 inches or 5 5cm from the back of the T V VN Warning damage Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or TV screen size 19 inches 48cm 22 inches 56cm 26 inches 69cm 32 inches 81cm 3 inches 94cm 42 inches 10 cm 47 inches 119cm 52 inches 132cm 46 EN Recommended VESA mount VESA MIS D 75 4 VESA MIS D 100 4 VESA MIS E 200 100 4 VESA MIS F 200 200 6 VESA MIS F 200 200 6 VESA MIS F 400 400 6 VESA MIS F 400 400 8 VESA MIS F 400 400 8 EPG information 8 days EPG is only available in some countries Country UK France Finland Sweden Denmark Norway Spain Germany Italy Greece Netherlands Czech Republic Belgium Austria Switzerland Estonia Lithuania Croatia Hungary Ireland Luxemburg Poland Portugal Russia Slovakia Slovenia Romania Serbia atvia Ukraine Bulgaria Kazakhstan 8 days EPG Yes

Philips LCD TV 47PFL7404H

Contents

Download Pdf Manuals

Related Search

Related Contents