iHome iP47 Black
Contents
1. 16 NOTE The iP47 is designed for use with Bluetooth wireless devices compatible with the HFP HSP A2DP and AVRCP streaming audio profiles Refer to your Bluetooth device s user manual or technical support to determine if your Bluetooth device supports these profiles Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzine thinner or similar materials can damage the surface of the unit FCC Information This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide resonable protection against harmful interference in a residenti2. 0 alm reset snooze Remote Control O Press POWER alm reset to turn unit on or off and reset alarm to come on the next day a Press MODE to select iPod Bluetooth FM1 FM2 AM or Line in mode Oo Press PLAY PAUSE to play iPhone iPod Bluetooth and to pause and to resume play Press FWD REV to skip to next or previous track Hold for high speed music scan Press to scan the radio frequency manually Hold for autoscan radio frequency Preset Radio Station on last used BAND FM1 FM2 or AM Pressing PRESETS again while already listening to a station in Preset memory will go to the next Preset station programmed Note you cannot program presets from the remote Q Press PRESETS button to automatically go to the last accessed Press TALK to answer a call or after dialling a number to connect a call Press END to cancel a call or end a call Press CLEAR to delete the last number entered hold to delete all numbers entered Press Keypad number buttons to enter a phone number ED Press SNOOZE when alarm is sounding to snooze for 9 minutes or during normal operation to adjust the brightness of the display Press RANDOM or REPEAT to activate deactivate random or a repeat settings on a docked iPhone iPod only Press MUTE in iPod Radio Line in or Bluetooth Music mode y 2 30 to toggle the speaker sound on amp off Mute will appear on display
3. or other transmitting device headset won t pair with the iP47 with the iP47 Others can t hear You are too far from iP47 microphone The mic is near the Snooze Button Move closer to the iP47 my voice voice isn t clear to listener Mic is muted Mute operation is on Press the Mute button to release mute 12 Trouble Shooting Symptom Possible Problem ten SS Can t wake to Device is not in play mode Make sure your device is powered and streaming music Bluetooth music Device is not charged Make sure your device is adequately charged to last through the set alarm time Device does not support A2DP and AVRCP If your device does not support the A2DP and AVRCP Bluetooth profiles profiles set your alarm to wake to radio Calls don t Volume on iP47 is too low Raise volume on the iP47 sound clear Poor connection or cell phone reception Retry call after moving phone for better reception connection Dialing out error Check your cell phone owner s manual or website to see if message your phone supports dialing out while listening to Bluetooth music If it does not turn off music before attempting to dial Some phones do not support dialing out while listening to Bluetooth music 13 Soluci n De Problemas S ntoma Causa posible po Soluci n La unidad no funciona El adaptador de AC no est conectado al Conecte el adaptador de AC a un tomacorriente y el no circula corriente tomacorriente o el conector no est conectado con
4. page 6 for details on setting radio station and presets 4 Press the Button again or wait for 10 seconds The alarm is now armed indicated by the numbered alarm clock icon Reviewing Arming and Disarming Alarm Turn Alarm Function On and Off 1 Press the or Button once The unit will show the current alarm time for alarm time review 2 Alarms are automatically armed when set Press alm on off button to arm or disarm the alarm Resetting the Alarm to Come on the Next Day 1 When the alarm is sounding press the Alarm Reset Power Button to stop the alarm and reset it to come on the following day at the same time Snooze 1 Press the Snooze Button after the alarm sounds The alarm will be silenced and come on again 9 minutes later Snooze can be pressed several times during the 1 hour alarm cycle Sure Alarm The iP47 has a sure alarm feature so the buzzer alarm still sound in the event of a power failure if backup battery is installed If your iPhone iPod or Bluetooth device has no sound for 20 seconds or is not present the iP47 will switch to buzzer alarm automatically Listening to iPhone or iPod 1 Dock an already playing iPhone or iPod always use proper insert see table on page 2 The iP47 will automatically turn on and you will hear the audio playing from your iPhone iPod Note If the audio source volume is too low on the iPhone iPod the iP47 may not detect that the iPhone iPod is in play mode If so pressing the Ala
5. return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below The product must include proof of purchase including date of purchase The fee for service without proof of purchase is 40 00 Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 3 Enclose a check or money order payable to the order of SDI Technologies for the sum of 15 00 40 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Drive El Paso TX 79936 6420 Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digi
6. the iP47 you can still use the handsfree speaker phone or other Bluetooth functionalit devices Device and iP47 are not paired AND linked Make sure your phone supports the A2DP and AVRCP Bluetooth profiles before linking pairing The iP47 defaults to the last linked device so a new device may need to be linked from the device itself see your device s user guide Can t play my iPhone iPhone does not support the A2DP profile Dock iPhone in P47 to listen to music music via Bluetooth Bluetooth device iP47 charges iPhone and docking iPod didn t charge up models only not other devices N Volume level is set too high Decrease the volume Sound is distorted If original sound source is poor quality distortion and noise are Sound source is distorted easily noticed with high power speakers Make sure your device is plugged into a working charger Try setting EQ to flat on your iPhone iPod or Bluetooth device Bluetooth music is Bluetooth device is out of range of iP47 Move your Bluetooth device within 30 feet of the iP47 broken up Can t hear caller s Bluetooth device is out of range of iP47 Move your cell phone closer to iP47 voice Volume on iP47 is too low Raise volume on iP47 Remote Control Batteries are weak dead Replace with new battery doesn t work Remote Control is too far way from main unit Move the Remote Control closer to main unit My Bluetooth Headsets and other receivers will not pair Pair headset directly with phone
7. Model iP47 Bluetooth A Alarm Clock Radio for iPhone iPod Questions Visit www ihomeaudio com Table of Contents Quick Slant tose 392222 RA d e STE E aE n na pts o Set AI a 1 2 Controls anid Indicators gt lt gt 2 2er pones ds pao SEH GES ees 3 1P47 Display 9 22 e DZ KERD HOZA n 3 Using the tha gt 222299 ee a 4 Using the Alarms S0 eses os teehee seen lt lt lt lt lt lt 55 55 5 5 Listening to iPhone iPod s s e seso see sce conte sete SS SSR eRe pon ira A e ie 6 Listening t Raglo see sss sane eee eee na ie E RRH 6 Listening to other portable audio devices 7 Listening to Bluetooth Music 7 Making Calls with Bluetooth Mobile Phone 8 Si ep Op lalion n ee aa ae eR Vee ee ae Gaeta eet aya EY EA SIYA ESR ea ee ae 8 Dimi mer Operatiot she cre a Se SEKE A ea eee aaa SENE eee ed HER 9 Remote Control se ioe Se rg Sree hie ee ea eS 9 Install Clock Backup Battery S 92 32292950295 s ser pao pesos a 10 Replacing the Remote Control Battery 10 A Consumer Guide to Product Safety 11 THOUDIG Shooting A S82 5 ese o RS o Seb SSeS a er aes 12 15 Warranty
8. Press MUTE or a VOLUME control to exit mute function Mule in Audio Mode Press MUTE during a phone call to mute the microphone Mic Muted will appear on display Press MUTE to exit mute function Install Clock Backup Battery The iP47 uses 3 x AA backup battery system to provide backup alarm operation and clock settings in the event of a power failure If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected the display backlight will not remain lit but current time and alarm time settings will be temporarily maintained Otherwise you must reset the time and alarm settings 1 Open backup battery compartment door located on the bottom of the unit 2 Please make sure the AC adaptor is connected Otherwise all settings may be lost during battery replacement 3 Insert 3 AA batteries checking that the polarity and ends of the battery matches the drawing near the battery compartment Close the compartment door Note Make sure you dispose of batteries properly see your local regulations Replacing the Remote Control Battery The remote control battery is already installed at the factory When the remote control s Battery Door stops operating or its range seems reduces it is time to replace a new one 1 The battery door is located on the back end of the unit 2 Pull the battery door to release the battery door latch and take out the battery h
9. aking and Answering Calls oo Once the iP47 is linked with your phone a To dial open the keypad on front of the unit Dial the number then press the Talk Button b To answer the phone press the Talk Button Press the End Button to end the call NOTE If you have call waiting press the Talk Button to answer a second call and place the first on hold Ns ta pairing 1 Ns a Select Bluetooth discover mode on your phone see your user manual b Press and hold the Play Pause button on the iP47 The unit will enter Auto pairing mode and begin searching for a device to pair with indicated by flashing Bluetooth and pairing icons c When prompted enter pass code for iP47 on your device 1234 d A screen on phone should confirm successful pairing 4 Setting the Time is preset to Eastern Standard Time Press and hold the Time Zone button until the Time Zone display flashes age Press UP or DOWN buttons to set your Time zone Zone EMMA Press the Time Zone button again to confirm and hold for 2 sec ZEN 5 iPod Bluetooth 6 Setting Alarms Radio Line in Wake to iPod or Bluetooth Press and hold Alarm 1 Button until the hour flashes Press the Mode button as Press the or w Button to set Hour needed to select iPod Bluetooth Press Alarm 1 again then press the or FM1 FM2 AM or Line in mode v Button to set minute Press Alarm 1 ES aga
10. al installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Getting Started Thank you for purchasing the iP47 Designed specifically to play music through Bluetooth from your mobile phone or computer through Bluetooth or line in cord This system provides high quality audio performance that brings out the best in your music and lets you wake or sleep to it Please read this instruction book carefully before the appliance is operated and keep it for future reference QDID B013895 Quick Start 2 Pair Your Bluetooth enabled Phone With The iP47 1 Power Attach AC adaptor cable to jack on back of the iP47 and plug the other end into a wall socket 3 M
11. as radiators heat register stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cord Protection Power supply cord should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet 6 Cleaning The unit should be cleaned only as recommended by the manufacturer 7 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or plug has been damaged Objects have fallen into or l
12. call press the Button ND A OQ al Ringer Volume Select 1 To select iP47 ringing volume press the Ringer Vol Button on the keypad to select to Hi Mid Low or Off Sleep Operation Sleep mode lets you sleep to iPod Bluetooth music or the radio gradually lowering the volume until the unit shuts off at the selected time 1 Press the Sleep Button to enter sleep mode The Sleep Icon will appear on the display to indicate it is sleep mode The unit will automatically turn off after the selected time Sleep mode has a Gentle Sleep feature which gradually lowers the volume You can adjust the sleep timer from 120 90 60 30 or 15 minutes by pressing the button again When the display changes back to show the real time press the Sleep Button once will show the sleep time remaining Pressing it again will change sleep time to next lowest increment 1P47 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm volume Press the W or Button on the iP47 or on the remote control to adjust the system volume The sleep volume will remain at that level the next time you enter sleep mode until controls are changed To stop listening at any time press the Alarm Reset Power On Off Button on the iP47 or on the remote control to turn it off Dimmer Operation During normal operation press the Snooze Button to control the brightness of the LCD display 8 w N a
13. ector a la ficha de salida AC de la unidad el ctrica a la ficha en la parte posterior de la unidad El tomacorriente no funciona Coloque otro aparato al tomacorriente y confirme su funcionamiento Si el tomacorriente tuviera un selector de encendido col quelo en esa posici n La unidad no est encendida Oprima el bot n Power encendido del iP47 No se escucha la El aparato no soporta tecnolog a Bluetooth Para escuchar m sica a trav s del iP47 se requiere tecnologia m sica por el 5DE ni piece Bluetooth A2DP o AVRCP si bien puede seguir utilizando el tel fono celular via l altoparlante del tel fono celular Bluetooth o desde El i iP47 tan lisad Aseg rese que su tel fono soporte tecnolog a Bluetooth A2DP otro aparato aparalo y SU no estan ligados Y AVRCP antes de conectarlos transmisor trabajando en conjunto El iP47 utiliza la tecnolog a del ltimo aparato conectado por ende este aparato deber estar ligado para realizarlo consulte el Manual de Instrucciones del aparato No se escucha m sica RE v a Bluetooth a trav s El iPhone no soporta tecnologia A2DP Para escuchar m sica encastre el iPhone en su iP47 del iPhone El sonido sale El volumen se encuentra muy alto Baje el volumen distorsionado Si el sonido original era de pobre calidad las distorsiones y ruidos se har n m s notables con los parlantes de alta potencia Intente modificar los ajustes de EQ a plano en su aparato Bluetoo
14. he Button until the hour display flashes Press the or w Button to set the alarm hour hold for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM wake time An icon in the upper right hand corner of the time display is the PM Indicator there is no AM indicator 2 Press the Button again The minute display will flash Press the or Button to adjust the minute setting hold for a few seconds to advance or reverse rapidly 3 Press the Button again The currently selected alarm mode will flash Press the Mode Button to select iPod iPhone or Bluetooth device to wake to 4 Press the Button again or wait for 10 seconds The alarm is now armed indicated by the numbered alarm clock icon Alarm 2 wake to the radio 1 Press and hold the Button until the hour display flashes Press the or w Button to set the alarm hour hold for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM wake time An icon in the upper right hand corner of the time display is the PM Indicator there is no AM indicator 2 Press the Button again The minute display will flash Press the 4 or v Button to adjust the minute setting hold for a few seconds to advance or reverse rapidly 3 Press the Button again The currently selected radio preset will flash Press a preset button P1 to P4 or use the Mode Button and or Button to select a radio station to wake to see Listening to Radio on
15. he system volume 6 Press 4 or v Button on the iP47 or on the remote control to go to the next or previous track Please remember to turn off Bluetooth device manually NOTE The iP47 must be in Bluetooth mode to play a Bluetooth enabled device 7 Making Calls with a Bluetooth Mobile Phone Before you make a call with the iP47 you need to pair and link your Bluetooth enabled phone with iP47 Please refer to Pairing procedure on page 7 Answer a Call 1 To answer a call press the Button Now you can use the iP47 as a speaker phone 2 Speak into the MIC located below the Snooze Dimmer Button and press the or Button on the iP47 or on the remote control to adjust the call volume 3 To end the call press the s Button Dial Re dial Dialing 1 Once the P47 is paired to a Bluetooth mobile phone you can use the integrated keypad or the remote control to enter a phone number Input a phone number in normal operation mode you do not need to be in Bluetooth mode then press the amp Button Press the Clear Button to cancel the last digit entered or press and hold Clear to cancel all digits Press the s Button to cancel the call To redial the last dialed number press the Button twice x2 Press the or Button on the iP47 or on the remote control to adjust the call volume NOTE The iP47 has separate volume settings for phone operation which don t affect the volume of other modes To end a
16. in then press Mode Button to select e m era Pod or Bluetooth device to wake to Wake to radio Press and hold Alarm 2 Press and hold a preset button to Button and adjust alarm time as above set current station as a preset then select radio station to wake to Quick Start 7 Inserts 8 iPhone iPod Insert an iPhone or Pod into the dock with proper maa eona te GE insert iPhone iPod must below and place insert in not be in a skin or case The cla iPhone iPod will charge while docked Press the Play Pause Button on the iP47 to play your iPhone iPod o iPhone 3G Pod touch 2G iPod nano 4G A AIS E iPhone 3G iPod touch 2G iPod nano 4G NOTE If you do not have an insert for your iPhone iPod please visit www ihomeaudio com or call iHome toll free at 877 446 6301 to purchase one Select the dock insert for your iPhone or iPod Never dock your iPhone or iPod without an insert in place Controls and Indicators Universal dock for iPhone iPod Snooze Dimmer Button Microphone Radio Preset Button Alarm 1 Button Sleep Button Alarm 2 Button Alarm On Off Button 2 TT Volume Up aby enfe lee to a Up Button gt o Volume Down Down Set Button TT Mode Button Alarm Reset Power Button a iPod Bluetooth FM1 FM2 AM j or line in Play Pause Button for iPhone iPod and End Button Bluetooth music Talk But
17. iquid has been spilled into the enclosure The unit has been exposed to rain The unit has been dropped or the enclosure damaged The unit exhibits a marked change in performance or does not operate normally Moo g gt 12 Antenna Do not connect an external antenna to the unit other than that provided 13 Periods of Nonuse lf the unit is to be left unused for an extended period of time such as a month or longer the power cord should be unplugged and take out batteries from the unit to prevent damage or corrosion 14 Servicing The user should not attempt to service the unit beyond that described in the user s operating instructions All other servicing should be referred to qualified service personnel Questions Visit www ihomeaudio com or call 1 877 446 6301 Toll Free 11 Trouble Shooting Possible Problem Solution Unit doesn t respond AC adaptor isn t plugged to a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into no power the connector is not plugged into the power the AC jack on the unit supply jack on the back of the unit Wall outlet is not functioning Plug another device into the same wall outlet to confirm the outlet is working If the outlet is controlled by a switch check that the switch is ON Can t play Bluetooth Device does not support the A2DP and While you need the A2DP and AVRCP Bluetooth profiles to stream music from cellphone AVRCP Bluetooth profiles music to
18. le hasta la hora programada El aparato no soporta tecnologia Bluetooth Si su aparato no soporta tecnologia Bluetooth A2DP y AVRCP A2DP y AVROP coloque su despertador para sonar con alarma o con zumbido Las llamadas El volumen del iP47 est muy bajo Aumente el volumen de su iP47 no se escuchan con claridad Hay mala recepci n celular en ese sector Vuelva a intentar la llamada desde otro sector Mensaje de error al Algunos tel fonos no pueden discar Verifique en el manual del usuario o en el sitio de internet de discar llamados mientras est escuchando su tel fono celular si su tel fono puede discar mientras est m sica via Bluetooth escuchando m sica via Bluetooth Si no lo permite apague la m sica antes de discar 15 Limited 1 Year Warranty Information iHome Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 1 Year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 15 00 charge for handling packing
19. n to select your time zone 3 Press Time Zone Button again You will hear two beeps confirming your setting and exit the Time Zone Setting mode 4 lf the time showing is not correct please see Setting Time and Calendar below to set the clock Setting Time and Calendar 1 Press and hold the Clock Adj Button located on the back of the unit for 2 seconds until the hour display flashes Press the 4 or w Button to adjust the hour hold for a few seconds to advance or reverse rapidly Remember to set the correct AM or PM hour An icon in the upper right hand corner of the time display is the PM Indicator there is no AM indicator 2 Press the Clock Adj Button again The minute display will flash Press the 4 or Button to adjust the minute setting hold for a few seconds to advance or reverse rapidly 3 Press the Clock Adj Button again The year will flash in the lower part of the display Press the 4 or Button until the current year is displayed 4 Press the Clock Adj Button again The number of the month will flash Press the or Button until the current month is displayed 5 Press the Clock Adj Button again The date will flash Press the or w Button until the current date is displayed 6 Press the Clock Adj Button once more Two beeps will sound to confirm your settings and you will exit Time and Calendar Setting mode Using the Alarms Setting the Alarms Alarm 1 wake to iPhone iPod or Bluetooth device 1 Press and hold t
20. older 3 Insert a CR2032 battery checking the and ends of the battery is matching to the drawing inside the battery compartment 4 Replace the battery holder back into the remote control Note Make sure you dispose of batteries properly see your local regulations For best results aim remote control towards the remote sensor on the lower center of the unit 10 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to assure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use Keep these instructions handy for future reference Take special note and adhere to all warnings on the unit and in the instruction and service manual 1 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool etc 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat source such
21. rm Reset Power Button on the main unit once should make it play When the iPhone iPod is docked and in standby mode press the gt t Button on the iP47 or on the remote control to play the iPhone iPod If the iP47 is already on press the Mode Button until iPod appears on the lower part of the display indicating the iP47 is in iPod mode If your iPhone or iPod Touch is in video mode you may see the locked slider on the iPhone iPod display If so you will need to unlock your iPhone iPod Press the dl Button on the iP47 or on the remote control to pause play press again to resume play Press the w or Button on the iP47 or on the remote control to adjust the system volume Press the Mute Button on the remote control to mute the iP47 output Press the Mute Button again or a volume button to release mute and restore normal sound output Press 4 or w Set Button on the iP47 or on the remote control to go to the next or previous track Press and hold while track is playing for high speed forward or reverse music search of the current track Listening to Radio Setting up the Antennas 1 Connect the AM loop antenna plug to the back of the unit adjust the antenna as needed for best reception 2 Extend FM wire antenna fully for best reception Do not strip alter or attach to other antennas Tuning and Playing the Radio 1 Press the Mode Button until the desired radio band appears FM1 FM2 or AM 2 Press the 4 or
22. tal media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI Technologies or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product 2008 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com or call 1 877 446 6301 Toll Free iP47 111108 B 16 Printed in China
23. th La m sica del aparato Su aparato Bluetooth est fuera del rango de Mantenga su aparato Bluetooth dentro de los 30 pies de Bluetooth sale entrecortada alcance del iP47 distancia del iP47 No se escucha la Su aparato Bluetooth est fuera del rango de Coloque su tel fono m s cerca del iP47 La fuente de sonido est distorsion ndolo voz de qui n ha alcance del iP47 llamado El volumen del iP47 se encuentra demasiado bajo Aumente el volumen del iP47 El control remoto no Las bater as est n gastadas Reemplace las bater as por nuevas unaona El control remoto est fuera de rango Acerque el control remoto a la unidad Mi auricular Algunos receptores y auriculares no pueden Conecte el auricular directamente a su tel fono u otro aparato Bluetooth no se conectarse al iP47 i conecta con el iP47 ieee Usted se encuentra muy lejos del micr fono Mant ngase dentro de los 5 pies de distancia del iP47 escucha con claridad del iP47 o no se escucha en o E NN 7 absoluto El micr fono est en Mute interrupci n de Oprima el bot n Mute interrupci n de sonido 14 Soluci n De Problemas S ntoma Causa posible La m sica con El aparato no est en modo Play reproducci n Aseg rese que el aparato est conectado y transmitiendo m sica Bluetooth no funciona como El aparato est descargado Aseg rese que el aparato tenga carga suficiente como para despertador durar
24. ton Clear Button Ringer vol Button Alpha Numeric Phone Keypad SSS g a DST switch Time Zone Button Line in Jack Clock Adjust Button AM ant Jack AC Adaptor Jack FM ant Wire iP47 Display Time Display Daylight Saving Time Indicator Alarm 1 Alarm 2 Indicators PM Indicator Bluetooth Indicator Battery Low Indicator amp AO pairing sleep gt Play Pause Indicator Ringer Indicator Sleep Display Silence Indicator Pairing Mode Indicator Speaker Phone Indicator Using the iP47 Connecting the iP47 to Power Source Connect the AC adaptor cable plug into the jack on the back of the system then plug the AC cord of the AC adaptor into the wall outlet Turning the iP47 ON or OFF Press the Button on the iP47 or on the remote control at any time to turn the iP47 On or Off Note that a docked iPhone or iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged in Setting Up the iP47 The iP47 clock is preset to U S Eastern Standard Time It is simple to adjust the unit for your location 1 Depending on your location and whether or not Daylight Saving Time DST is in effect set the DST Switch located on the back of the unit to 1 to add one hour or to 1 to subtract one hour 2 Press and hold the Time Zone Button located on the back of the unit until Time Zone Indicator at the lower part of the display flashes Press the or w Butto
25. w Button to tune the radio to a desired station Hold briefly to have the radio autoscan search for the next clear station 3 To memorize the current station as a preset press and hold Preset Button 1 2 3 or 4 A beep will confirm the setting and the preset number will appear in the display Repeat steps 1 3 to preset up to 12 stations 8 FM and 4 AM To listen to a preset station at any time simply press the desired preset button To change presets select your radio band tune to the desired station and press and hold the preset button Press the w or Button on the iP47 or on the remote control to adjust the system volume N Or CO 9 S Listening to other portable audio devices You can play a MP3 player or other portable audio device through the P47 via the Line in Jack 1 Plug one end of an audio patch cord available at http www ihomeaudio com into the headphone or line out jack on your device and the other end of the patch cord into the iP47 Line in Jack located on the back of the unit 2 Turn on the iP47 and press the Mode button until Line in appears in the lower part of display indicating Line in playing mode 3 Turn on and play your device 4 Press the 4 or Button on the iP47 or on the remote control to adjust the system volume You may need to adjust your device volume too Remember to turn off your device when you are done playing it Listening to Bluetooth Music You need to pair
26. your Bluetooth device with the iP47 before you can auto link to play stream Bluetooth music through the iP47 Pairing creates a permanent bond so two devices can always recognize each other Note the iPhone does not support the A2DP protocol so it cannot be used to stream music See Listening to your iPhone to play your iPhone through the P47 Pairing 1 Press and hold the Button for 4 seconds to begin pairing operation The Bluetooth and pairing icons will flash 2 Activate Bluetooth on your device according to the device s user manual to link to iP47 You may need to input the iHome device pass code 1234 3 Once connected the Bluetooth Icon will remain 4 iP47 will auto link with the last linked device when that device is in range Playing Bluetooth Music 1 Once your device and the iP47 are linked you can start to play Bluetooth music through the iP47 2 Turn on the iP47 and press the Mode button until Bluetooth appears in the lower part of the display 3 Press the bli Button on the iP47 or on the remote control to play your Bluetooth enabled device The display will show Bluetooth and a Play Icon Depending on the Bluetooth device you are using you may need to manually go into media player mode on your device to make it work properly 4 Press the gt t Button again to pause play press again to resume it 5 Press the w or Button on the iP47 or on the remote control to adjust t
Download Pdf Manuals
Related Search