Home

Sharp LC-37D44E-BK LCD TV

1. To display more detailed information press again e You can verify the signal strength and quality of the selected service here Useful features DTV 5 z z NOTE Using multi audio function e When Subtitle is set to On the TV will automatically Change the audio mode and language for the currently GE viewed service e When you press while watching DTV broadcasts the 1 Press when no other menu screen is message No subtitle may appear instead of the Subtitle displayed OSD screen as mentioned This happens depending on the type of programme and happens even when the TV is actually receiving the subtitle data In this case press first to activate the teletext mode then press ti S No Language Code Audio Type If you set the country setting of Auto Installation to one 1 MPEG2 of the 4 Nordic countries Sweden Norway Finland or 2 MPEG2 Denmark 3 MPEG2 e Subtitle is set to On when you turn off the power or 4 MPEG2 change the channel When another country is selected e Subtitle is set to Off when the power is turned off Using the MHEGS5 application UK only Multi Audio av Ak Select DTV MENU 2 Press lt gt to select the desired audio mode Left Right L R Stereo and then press W to move down 6 bri h the MHEG ome services bring you programmes with the 3 Press A Y to sele
2. The LCD panel is a very high technology product giving you fine picture details Due to the very large number of pixels occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red This is within product specifications and does not constitute a fault Precautions when transporting the TV When moving the TV it should always be carried by two people using both hands be careful not to apply pressure to the display Trademarks e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC e The HD ready Logo is a trademark of EICTA The DVB logo is the registered trademark of the Digital Video Broadcasting DVB project Supplied accessories Remote control unit AC cord X 1 x1 Product shape varies in some countries Pages 5 and 6 e AA size battery X 2 Quick guide Cable clamp X 1 Stand unit x 1 EE SW Page 4 e Operation manual This publication Attaching the stand Before performing work spread cushioning over the base area to lay the TV on making sure the area is completely flat This will prevent it from being damaged Before attaching or detaching stand unplug the AC cord from the AC INPUT terminal 1 Confirm the 10 screws supplied with the TV Screws x 10 2 Attach the two parts of the
3. Dear SHARP customer Important Safety Precautions Trademarks sassis Supplied accessories Quick guide Attaching the stand Setting the TV Inserting the batteries Using the remote control unit Cautions regarding the remote control unit Remote control unit TV Fron TV Rear view Turning on the power Standby mode nitial auto installation Analogue Using the analogue programme list initial auto installation DTV Using external equipment Connecting a VCR Connecting a game console or camcorder Connecting a DVD player Connecting a decoder Connecting a PC Using AV Link function Menu operations Menu operation buttons Operation without a remote control On Screen Display Common operations Picture menu A 0 0 4 4 4 4 4 3 4 4 _ _ _ 2 2 0 00 0 2 1 1 1 Picture adjustments Advanced Colour Temp Black 8D Y C Monochrome Film Mode Audio menu AV Mode Audio adjustments Surround Auto Vol Clear Voice Power Control menu No Signal Off No Operation Off Power Manag
4. CHANNEL UP WIDE MODE 11151570111 _ 05 00 75996 CIHIDIWI ul CHANNEL DOWN 11151511771 070 D T V D _ THREE DIGIT DTV DIRECT CHANNEL 1 999 User for 11016121771 200M 14 9 Av LC 37D44E D E 3 _ PANORAMA AV D V FOUR DIGIT DTV DIRECT 41 FULL AV CHANNEL 1 9999 User for 1110151511 _ T cinema 16 9 ay 10 370445 0171 101212 116 999 User for LC 37D44E WHI DE 6 CINEMA 14 9 AV 1 to 9999 User for LC 37D44S 9 IV NORMAL PC DTV CHANNEL UP 1 10 FULL PC DTV CHANNEL DOWN 1 1 10 INPUT SELECTION 8 11 1517110 _ _1_161 we MUTE 41 1115 01 MUTE Toggle 1 1 RTA CVBS 1 _ _ _ MUTE ON 1 2 RGB 5 2 MUTE OFF 0 2 1 7 1 2 2 0 SURROUND 0 0 SURROUND Toggle 1 121211171 71 71602 CVBS 1 SURROUND ON 2 2 EXT2 RGB 51010 1 121 SURROUND OFF 2 0 2 1 510 AUDIO CHANGE SOUND SELECT ST Bilingual i nfelafo _ _ _
5. Item with displayed in grey e This indicates the item cannot be selected for various reasons NOTE OOOO Menu options differ in the selected input modes but the operating procedures are the same e The screens in the operation manual are for explanation purposes some are enlarged others cropped and may SHARP Sw o vary slightly from the actual screens MENU Press to open or close the menu screen Press to select a desired item on the screen or adjust a selected item OK Press to go to the next step or complete the setting RETURN Press to return to the previous step DTV MENU Press to open or close the DTV Menu screen END Press to exit the menu item Operation without a remote control This function is useful when there is no remote control within your reach 1 Press MENU and the MENU screen displays 2 Press P V A instead of A V or 1 instead of lt gt to select the item 3 Press to complete the setting NOTE e The MENU screen will disappear if left unattended for several seconds Menu operations Common operations Menu Operation A Press MENU and the MENU screen displays Press lt p gt to select the desired menu Press A F to select the desired menu item and then press OK Example AV Mode etc e Select Reset to reset all adjustment items to the factory preset values MENU Pic
6. and then press OK timeout Secs None service banner information To re scan the selected carrier eee Select the carrier and then press BLUE Rescan Banner Top Bottom Select whether the service Re scanning starts position banner information appears on top or bottom A confirmation message displays of the screen Press to select Yes and then press OK Transparency None 10 20 Select the desired level NOTE 50 of On Screen Display e After re scanning the selected carrier the order stored by transparency using the Move function will revert to the default order The transparency for Service banner displays is not adjustable 68 26 DTV menu operations Child Lock This function allows TV and Radio services to be restricted It prevents children from watching violent or sexual scenes that may be harmful 1 Press lt gt to select System Setup Press to select Child Lock and then press OK 2 3 you have already set the PIN enter it here If not enter the factory preset PIN 1234 4 Press lt p gt to select the desired age rating 4 18 Universal Parental X rated None and then press OK e None Children Youth and Adult are the ratings used in Sweden Please contact the organizations concerned for details Child Lock DTV MENU 4h Select NOTE e Universal and Parenta
7. Item Off Both screen images and audio are output On Audio is output without screen image Menu operations DNR Digital Noise Reduction Menu Operation A page 12 Produce a clearer image Off High Low HDMI Setup HDMI High Definition Multimedia Interface terminal selection 1 To watch an HDMI equipment image select EXT6 or EXT7 the terminal which you are using from INPUT SOURCE menu using 2 on the remote control unit or TV 2 Press MENU and the MENU screen displays 3 Press to select Option 4 Press to select HDMI Setup and then press OK e HDMI Setup is displayed only when EXT6 or EXT is selected from the INPUT SOURCE menu MENU Option HDMI Setup g Option Audio Only DNR Off HDMI Setup D Press A T to select the desired item and then press OK D Press to select the desired setting and then press OK HDMI Setup items Selectable items Description Signal Type RGB YCbCr 4 4 4 Select the video signal YCbCr 4 2 2 type from the HDMI terminal ITU601 ITU709 Select the internal colour space conversion method when an RGB signal is input Colour Matrix Dynamic Range Normal Enhanced Select the signal amplitude range Usually select Normal Disable Enable Set whether or not to use WIDE MODE based on signal recognition including an HDMI signal Auto Vie
8. 002 3001 lt 3008 3004 001 ARD 002 ZDF gt Move To Use this function to change the position of two selected services 1 Press amp to select the desired service 2 Press on the remote control 3 Enter the number you want to change to using numeric buttons and then press OK The positions of the selected services are switched Do not press END to exit the screen here if you wish to register the change e You cannot enter a service number that is not listed 4 Press OK again the message Successfully updated displays The change is now registered 001 ZDF 004 ZDF Skip Services that are set to skip will not be picked up when pressing P N V 1 Press amp to select the desired service 2 Press on the remote control An icon displays indicating the service to be skipped e Pressing will turn the skip icon on and off Do not press END to exit the screen here if you wish to register the change 3 Press OK NOTE To view services that are set to be skipped use numeric buttons or select from the Programme List DTV menu operations Select Use this function to jump to the specific service in one step This is useful when there are many services displayed on screen to scroll through 1 Press on the remote control Now you can change the service number on the left side of the screen 2 Enter the number using numeric buttons and t
9. watching DTV immediately before 3 0 9 e turning off the TV In this case first select Set the channel in TV and DTV mode any other input source except DTV Set the page in Teletext mode using the SC button When one of the 4 Nordic countries 18 1 Volume Sweden Norway Finland or lt lt Increase the volume Denmark is selected in the country Decrease the volume setting of Auto Installation DTV 19 P A V channels are 4 digits When another TV DTV Select the channel country is selected DTV channels External Switch to TV or DTV input are 3 digits mode Teletext Move to the next previous 4 lt Flashback page Press to return to the previous selected 20 INPUT SOURCE channel or external input mode Select an input source 5 88 WIDE MODE TV DTV EXT1 2 2 7 3 EXT4 Select the wide mode See page 20 15 EXT6 EXT7 See page 9 6 Zi Sound mode 21 SLEEP 8 Select the sound multiplex mode Set the sleep timer on in units of 30 See below min up to max 2 hr 30 min and off 7 EPG 22 Display information DTV To display EPG Electronic See pages 21 29 and 30 Programme Guide screen 23 DTV MENU 8 ESG DTV Display DTV Menu screen DTV To display ESG Electronic Service 24 MENU Guide screen See page 30 Display the MENU screen 9 Teletext See page 11 Select the TELETEXT mode See pages 25 OK 21 and 31 Execute a command within the menu DTV Select DTV data broadcas
10. 0 10 5 5 When 7 is input for some commands the present setting value responds 7 Response code format Normal response O K SS Return code ODH Problem response communication error or incorrect command ERR lt 4 Return code ODH 33 Appendix Commands CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING 8 0 POWER OFF POSITION 11210915177 11 _ H POSITION AV 10 10 INPUT SELECTIONA 6 0 INPUT SWITCHING Toggle 5 av 10 10 TV CHANNEL FIXED 12519151 5 _ V POSITION Av 10 10 DTV CHANNEL FIXED 8 10 10 1 5 18 7 cli Tel kT 0 00 0 890 1 1 51 10 1212 12 1to7 ERR 0 2 01110112151 5 21015180 CHANNEL 0 6 _ TV DIRECT CHANNEL 1 99 Plalslel _ _ PHaseo 64 1 515 1 01964 6 8 8
11. J K L N R U w 1 a b d h k I m 5 v w x 74 amp Select 41 Input area Space To add or overwrite with a space Character select area YELLOW Select button Press to move between the input area and character select area button Press to move the cursor OK button While in the input area Confirms the new name Once OK is pressed to confirm a confirmation message displays Press to select Yes and then press OK While in the character select area Confirms the input of a character Sample operation using Alpha Numerical Character Set 1 Call up the character set screen while in the Label or Carrier Setup screen See pages 25 and 26 2 Press YELLOW Select to move the cursor to the character select area 3 Press to select the desired character and then press OK Repeat until the new name is fully entered e Use space to add a space or overwrite 4 To register the new name press YELLOW Select to move the cursor back to the input area 5 Press OK e A confirmation message displays D Press to select Yes and then press OK Select language settings for audio if a programme is broadcast in more than one language and MHEG5 service 1 Press OK while the cursor is on Language 2 Press to select 1st Pref Audio 2nd Pref Audio 3rd Pref Audio or MHEG 3 Select
12. T 2K 8K OFDM Receiving VHF UHF E2 E69ch F2 F10ch 21 4696 IR A IR Jch Digital E5 E69ch Channel CATV Hyper band S1 S41ch Tv Tuning System Auto Preset 999 ch non Nordic 9999 ch Nordic ATV 99 ch Auto Label Auto Sort STEREO BILINGUAL NICAM A2 Brightness 450 cd m in Dynamic Mode Backlight life 60 000 hours in Standard Mode Viewing angles H 176 V 176 Audio amplifier 10W x 2 Speaker 100 x 35 x 2 Terminals UHF VHF 75Q Din type Analogue amp Digital 9 pin mini D sub SCART AV input Y C input RGB input TV output SCART AV input output Y C input RGB input AV Link S VIDEO Y C input RCA pin AV input 3 5 mm jack Audio input 15 pin mini D sub PC Audio in Component in HDMI 3 5 mm jack Audio input HDMI Common Interface EN50221 R206001 OUTPUT RCA pin Audio Headphones 3 5 mm jack Audio output Power Requirement AC 220 240 V 50 Hz Power Consumption 146 W 0 9 W Standby Method IEC60107 Weight 14 5 kg Display only 17 0 kg Display with stand Operating temperature 0 C to 40 C O e As apart of policy of continuous improvement SHARP reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated are nominal values of p
13. THE PIN We suggest that you remove the following instruction from the operation manual to prevent children from reading it As this operation manual is multilingual we also suggest the same with each language Keep it ina safe space for future reference 1 Repeat steps 1 to 3 in Changing the PIN See page 17 2 Enter 3001 to cancel out the current PIN e The PIN resets to the factory preset 1234 68 22 Appendix PC compatibility chart VESA Standard 31 5 kHz 60 Hz v Vertical Frequency Horizontal Frequency Resolution VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 WXGA 1280 x 768 WXGA 1360 x 768 37 9 kHz 60 Hz 48 4 kHz 6017 47 7 kHz 6017 47 7 kHz 6017 VGA SVGA XGA and WXGA are registered achines trademarks of International Business Corp NOTE e This TV has only limited PC compatibility correct operation can only be guaranteed if the video card conforms exactly to the VESA 60Hz standard Any variations from this standard will result in picture distortions e Depending on the graphics card resolutions of 1360 x 768 may not display correctly RS 232C port specifications PC Control of the TV e When a program is set the TV can be controlled from the PC using the RS 232C terminal The input signal PC video can be selected the volume can be adjusted and various other adjustments and settings can be made enabling automatic programmed pl
14. a desired language for each item NOTE e See page 18 to change the language displayed on screen e See page 31 to change the subtitle language e See page 31 for details on the MHEGS service Available language list Basque Greek Catalan Italian Croatian Norwegian Czech Polish Danish Portuguese Dutch Russian English Serbian Finnish Slovak French Spanish Gaelic Swedish Gallegan Turkish German Welsh Languages available for MHEGS service Programme Setup Configure various settings for each service Press the preassigned numeric buttons to access each of the functions explained below Press OK while the cursor is on Programme Setup Sample Programme Setup screen Programme Setup S No Services Fav Lock Skip Erase Move 001 BBC 7 002 BBC News H 003 588 1 004 8802 Lock Move To Select Label AW Select k DTV MENU RADIO TV Radio NOTE e The picture window shows a blank image if Radio services are listed 68 23 08 24 DTV menu operations Favourite Assign services to 4 different favourite groups 1 Press to select the desired service 2 Press on the remote control A selection box displays 3 Press to register the selected service to any of the 4 favourite groups None Fav 1 Fav 4 and then press OK An icon displays indicating the favourite status e Do not press END to exit the screen here if you wish to register the
15. change 4 Press OK 5 Now you can easily select your favourite service from the Programme List See page 30 NOTE e You cannot register the same service to two different favourite groups Lock When the service is locked you must enter your PIN whenever you tune to the service 1 Press to select the desired service 2 Press on the remote control If you have already set the PIN enter it here If not enter the factory preset PIN 1234 An icon displays indicating the service is locked e Pressing will turn the lock icon on and off PIN entry is required when lifting the lock icon Do not press END to exit the screen here if you wish to register the change 3 Press OK NOTE e See page 17 for setting the PIN Move Sort the order of the selected service by moving the service position 1 Press amp to select the desired service 2 Press on the remote control An icon displays indicating the service to be moved e Pressing will turn the move icon on and off 3 Move the selected service to the desired position using A V and then press OK Do not press END to exit the screen here if you wish to register the change 4 Press OK to register the change EXAMPLE Moving 002 ZDF ahead of 001 ARD Default order Press to select the desired service 001 lt 3002 3008 3 004 Sorted order Press to select the desired service
16. exa mono SLEEP TIMER O F T M O _ _ _ OFF 5 0 EXTS COMPONENT O F TIM 30m 111 1516109 _ _ _1676 HDMi 11 12171091 EXT7 HDMI 91111114127 11 00 91751711 93 1h30m AV MODE SELECTION A V M D 0 _ MODE SELECTION Toggle AT Vv p 1 _ _ 8 0 0 91177171414 pm 91171711815 11717121730 410 2 II SOFT 91717118121 21212 150 1 2 ECO 0 4 Tuerm TEXT TIE XIT 0 _ _ TEXT OFF _ TEXT CHANGE Toggle A V M D 5 _ _ DYNAMIC Feels 0 15 RE 9701 6 DIRECT PAGE JUMP 100 899 VOLUME 1 9 1 1 VOLUME 0 60 DIC P G 100 to 899 1911141212 12121017960 NOTE e an underbar _ appears in the parameter column enter 8 space e If an asterisk appears enter a value in the range indicated in brackets under CONTROL CONTENTS Rating table for Child Lock Broadcasted adjusted rating me 1 rm reem UT 7157 Appendix Specifications Item 37 LCD COLOUR TV Model LC 37D44E LC 37D44S LCD panel 37 Advanced Super View amp BLACK TFT LCD Resolution 1 049 088 pixels 1 366 x 768 Video Colour System PAL SECAM NTSC 3 58 NTSC 4 43 PAL 60 TV Tv Standard Analogue CCIR B G D K L L Function Digital DVB
17. press Q Is the AC cord disconnected See page 4 Check if you pressed on the TV See page 8 Unit cannot be operated External influences such as lightning static electricity etc may cause improper operation In this case operate the unit after first turning the power off or unplugging the AC cord and re plugging it in after 1 or 2 minutes Remote control unit does not Are batteries inserted with polarity aligned See page 5 operate Are batteries worn out Replace with new batteries Are you using it under strong or fluorescent lighting s a fluorescent light illuminated to remote control sensor Picture is cut off 5 the image position correct See page 18 Are screen mode adjustments 4 3 Mode WSS such as picture size made correctly See pages 18 and 20 Strange colour light colour or Adjust the picture tone See pages 13 and 14 dark or colour misalignment 5 the room too bright The picture may look dark in a room that is too bright Check the colour system setting See pages 16 and 19 Check the HDMI Setup setting See page 19 Power is suddenly turned off The unit s internal temperature has increased Remove any objects blocking vent or clean Check the power control setting See page 15 5 sleep timer set Press SLEEP on the remote control unit until it sets to Off No picture 5 connection to other components correct 566 pages 9 and 10 5 inp
18. stand unit to each other using the 6 screws as shown 3 41 Insert the stand into the opening on the bottom of the TV Insert and tighten the 4 screws on the rear of the TV as shown NOTE e To detach the stand perform the above steps in reverse order Quick guide Setting the TV Place the TV close to the AC outlet and keep the power plug within reach Standard DIN45325 plug IEC 169 2 75 ohm coaxial cable Antenna Connect the antenna cable from your antenna cable socket or the room roof antenna for antenna input terminal on the back of your TV set to receive digitally terrestrially broadcast stations An indoor antenna can also be used under good reception conditions Passive and active room antennas are offered commercially In an active antenna its power is supplied via the antenna input terminal The supply voltage 5V must be correspondingly set under Supply Voltage See page 18 Product shape varies in some countries AC cord Bundling the cables Bundle the cables with the clamp Cable clamp Setting the TV on the wall This TV should be mounted on the wall only with the wall mount bracket available from SHARP See page 35 The use of other wall mount brackets may result in an unstable installation and may cause serious injuries The centre of the TV screen is 6 mm above A engraved onto the metal plate angle used for
19. you to enjoy realistic live sound NOTE e You can also choose surround effects by pressing SURROUND on the remote control unit Auto Vol Menu Operation A page 12 Different sound sources fairly often do not have the same volume level for example the changing from movie to the advertisements The Automatic Volume Control Auto Vol solves this problem and equalises the volume levels TV DTV AV only Clear Voice Menu Operation A page 12 This function emphasises speech voice against the background noise for more intelligibility It is not recommended for music sources Power Control menu MENU Power C I Power Control Setup Disable Disable No Operation Off No Signal Off Menu Operation A page 12 When set to Enable the TV will automatically enter the standby mode if there is no signal input for 15 minutes e Five minutes before the TV enters standby mode the remaining time displays every minute TV AV only NOTE e When a TV programme finishes this function may not operate e This function is not available in DTV mode No Operation Off Menu Operation A page 12 When set to Enable the TV will automatically enter the standby mode if no operations are performed for 3 hours e Five minutes before the TV enters standby mode the remaining time displays every minute PC only Power Management Menu Operation A page 12 When set the TV will autom
20. 2 Press RED Page or GREEN Page to skip to the previous next page in one step In the Event name list 1 Press lt gt to scroll the page left right Or 2 Press YELLOW Prev Day or BLUE Next Day to skip to the previous next day in one step 3 To watch an event currently on air press OK OK Timer e The TV will show the image in full screen e Selecting an event that has not yet started will activate the EPG Timer mode instead NOTE e Pressing opens the EPG Description screen that provides more information about the selected event Press or END to exit Using the EPG Timer When the Timer is set the TV automatically tunes to a preset TV event when its on air time begins 1 Press EPG 2 Press to select the desired event to be preset from the Event name list and then press OK OK Timer e Select an event not yet started 3 Press RED Timer Mode and then press A V to select the desired parameter Once Daily Weekly or Monthly and then press OK e Once set the preset event is indicated with an orange background in the EPG event name list e To cancel the preset select the event to delete press GREEN Delete Timer press to select Yes and then press OK Timer S No Service name Mode Date Time Duration 070 BBC News Once 04 11 05 07 00 00 30 Once Daily Monthly Timer Mode Delete Timer av Select DTV MENU OK NOTE e This function cannot be set
21. NU O 6 4 RETURN Press to display the subtitle selection screen Press to display TELETEXT or start the MHEGS presentation if available Aside from direct channel entry each of the numeric buttons have a unique function assigned in the Programme Setup screen Press to access DTV mode Press to open the EPG screen Press to open the ESG screen Press to switch between TV and RADIO mode e Due to the large variation in transmitted volume levels in RADIO mode some stations will produce distortion if the volume level is set too high Press to open the multi audio screen Press to open or close the DTV Menu screen Press to open the service banner or view detailed information from the EPG ESG screen Press to select a desired item on the screen or adjust a selected item Press to go to the next step or complete the setting Press to open the Programme List when no other menu screen is active Except when an external input source is selected Press to exit the current menu screen without saving the changes Each of the coloured buttons have a unique function assigned in the menu screen Press to return to the previous step Example DTV MENU Language e a PR av dk Select DTV MENU OK END Language e To customise the language preference for audio and MHEGS5 application Pr
22. Programme Guide EPG you can check the schedule of DTV and Radio events view detailed information about them tune to an event currently on air and set a timer for future events General EPG screen J 07 00 07 30 E Sun 16 04 2005 07 05 11 16 04 2005 Services BBC News BBC2 CBBC Channel Page _ Page Next Day AY 4h Select OK OK Timer i Dm MENU RADIO TV Radio Service name Event name Programme information Picture window OO e Service list e Shows the list of all services currently available As you scroll down the list the rows in the Event name list on the right will be refreshed correspondingly Event name list e Shows the names of current events in a grid of rows and columns You can check scheduled event information up to several days ahead depending on conditions e f a received programme does not contain a name either No event name or a blank space will be displayed However the programme can still be watched Using the EPG 1 Press EPG e Pressing RADIO will switch between DTV and Radio mode 2 Press to access the desired service or event 9 There 8 a slight lag from the time of the operations to the time the Programme information and Picture window display is affected e The image shown in the picture window changes In the Service list 1 Press to scroll the page up down Or
23. SHARP LC 37D44E LC 37D44S ENGLISH LCD COLOUR TELEVISION LCD FARBFERNSEHGERAT 2 TELEVISEUR COULEUR ECRAN CRISTAUX LIQUIDES LCD TELEVISORE A COLORI LCD LCD KLEURENTELEVISIE TELEVISION EN COLOR LCD TELEVISOR DE CRISTAL L QUIDO OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO A Qu O S MANUAL DE OPERA O FRANCAIS ff ITALIANO Ka a E S Lu e Lu 2 ESPANOL Digital Video gea dy Broadcasting SPECIAL NOTE FOR USERS IN THE U K The mains lead of this product is fitted with a non rewireable moulded plug incorporating a 13A fuse Should the fuse need to be replaced a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above which is also indicated on the pin face of the plug must be used Always refit the fuse cover after replacing the fuse Never use the plug without the fuse cover fitted In the unlikely event of the socket outlet in your home not being compatible with the plug supplied cut off the mains plug and fit an appropriate type DANGER The fuse from the cut off plug should be removed and the cut off plug destroyed immediately and disposed of ina safe manner Under no circumstances should the cut off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur To fit an appropriate plug to the mains lead follow the instructions bel
24. Setup Manual Adjust menu preset download automatically runs if you change information on that menu Fine You can adjust the frequency to your desired position NOTE e Adjust while checking the background picture as a reference e Instead of pressing lt p gt to adjust the frequency in step 5 above you can set by directly entering the frequency number of the channel with 0 9 EXAMPLE e 179 25 MHz Press 1 gt 7392 5 e 49 25 MHz Press 4 gt 9 gt 2 gt 5 OK Colour sys Select the optimum colour systems to receive AUTO PAL SECAM Sound sys Broadcasting system Select the optimum sound systems Broadcasting systems to receive B G D K L L Label When a TV channel sends its Network Name the Auto Installation detects the information and assigns a name to it However you can change individual channel names 1 Repeat steps 1 to 4 in Manual Adjust 2 Press to select each character of the new name for the channel and then press OK 3 Repeat step 2 above until the name is fully spelt out e The name can be 5 characters or less e f a channel name is less than 5 characters select END then press OK Skip Channels with Skip set to On are passed over when using P A V even if selected while watching the image from the TV Decoder When connecting a decoder to the unit you need to select EXT1 NOTE e Off is factory preset valu
25. acquired successfully the time information will appear in the upper right corner of the screen by pressing MENU Button functions Buttons Description P A V Increase or decrease the page number Colour Red Green Yellow Blue Select a group or block of pages displayed in he coloured brackets at the bottom of the screen by pressing the corresponding Colour Red Green Yellow Blue on the remote control unit 0 9 Directly select any page from 100 to 899 by using 0 9 Reveal hidden Teletext Reveal or hide hidden information such as an answer to a quiz Freeze Hold Stop updating Teletext pages automatically or release the hold mode 09 Subtitle for Teletext Display the subtitle or exit the subtitle screen e Subtitle will not be displayed when the service does not contain the subtitle information Subpage Reveal or hide subpages e Red button Move to the previous subpage e Green button Move to the following subpage e These two buttons are shown on the screen by the signs and 68 21 DTV menu operations DTV menu operation buttons DTV On Screen Display Use the following buttons on the remote control unit to operate the DTV Menu DTV EPG ESG RADIO WO 1 5 DTV MENU i A V lt gt OK END Colour RETURN 22 MODE 5 ey 990 96 Ooo EP 556 DTV MENU Se amp ME
26. affixing to a wall e Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves SHARP bears no responsibility for improper mounting or mounting that results in accident or injury e You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall Quick guide Inserting the batteries Before using the TV for the first time insert two AA size batteries supplied When the batteries become depleted and the remote control unit fails to operate replace the batteries with new AA size batteries 1 Hold in the tab on the battery cover and pull the cover towards the direction of the arrow 2 Insert two supplied AA size batteries e Place batteries with their terminals corresponding to the and indications in the battery compartment 3 Insert the smaller tab of the battery cover into the opening UL and press down on the cover until it clicks in place CAUTION Improper use of batteries can result in chemical leakage or explosion Be sure to follow the instructions below e Do not mix batteries of different types Different types of batteries have different characteristics e Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries e Remove batteries as soon as they have
27. arried out if there is no new software available at the specified download time If upgrade via Over Air Download is NOT available at the time A message tells you that there is no software available to be downloaded 3 Check the new software version number to confirm the successful upgrade Auto upgrade 1 When you tune to the service that provides the upgrade via Over Air Download a confirmation message displays 2 Follow the screen prompts 3 Check the new software version number to confirm the successful upgrade NOTE e To scan all carriers for upgrade availability perform the manual upgrade e The software upgrade may take about 30 minutes but may take longer up to 1 hour depending on the signal status While updating you cannot switch to TV or external input mode or enter standby mode using on the remote control unit CAUTION Do not disconnect the AC cord when the software upgrade is in progress as this may cause the upgrade to fail If problem arises ask a qualified service personnel before the software upgrade period expires 68 27 DTV menu operations Common Interface Inserting a CA card Check the detailed information on the CI module A single DVB Common Interface Cl will be Common Interface module and the CA card implemented to allow adoption of a Conditional Access Conditional Access card in use CA system by means of a plug in CA module 1 Press OK while the curso
28. atically enter the standby mode Item Off No power management Factory preset value If there is no signal input for 8 minutes the TV enters the standby mode Even if you start using the PC and the signal inputs again the TV stays in standby mode The TV turns on again by pressing 0 on the TV or 4 on the remote control unit See page 8 If there is no signal input for 8 seconds the TV enters the standby mode When you start using the PC and the signal inputs again the TV turns on The TV turns on again by pressing 0 on the TV or 4 on the remote control unit See page 8 MENU Setup w Setup Auto Installation i Option Programme Setup Child Lock Position wss On 4 3 Mode Panorama Language English Supply Voltage Off 0V Auto Installation You can run Auto Installation again even after setting up the preset channels 1 Press MENU and the MENU screen displays 2 Press to select Setup Press to select Auto Installation and then press OK If you have already set the PIN under Child Lock enter it here e See page 17 for setting PIN 4 Press to select Yes and then press OK 5 You can set language and country the same as in the Initial auto installation Analogue Follow steps 1 and 2 on page 8 GB 15 Menu operations Programme Setup This section describes how to set up analogue TV channels manually 1 Pre
29. ave displays Press to select Yes or No and then press OK Carrier Scan Manually add a new carrier by entering the desired carrier number or frequency band 1 Press to select Installation 2 Press A V to select Carrier Scan and then press OK If you have already set the PIN enter it here If not enter the factory preset PIN 1234 Carrier Scan Av dk Select 0 9 DTV MENU 3 Press to select Channel then lt p gt to enter the carrier number and then press OK e The frequency of the selected carrier in the below cell changes correspondingly 4 After the scan is complete the screen shows all available services for the selected range 5 A confirmation message displays Press lt p gt to select Yes and then press OK to save the change NOTE e You can directly enter the frequency instead of step 3 In this case select Frequency kHz enter the number using numeric buttons and then press OK Use lt p gt to move between the digits e After performing Carrier Scan the order stored by using the Move function will revert to the default order e See page 17 for setting the PIN 68 DTV menu operations Carrier Setup System Setup This is provided for you to rename label erase or re Configure On Screen Display and Child Lock settings scan carriers Carrier in this context refers to a service
30. aying NOTE e This operation system should be used by a person who is accustomed to using PCs RS 232C serial control cable cross type commercially available Communication conditions Set the RS 232C communications settings on the PC to match the TV s communications conditions The TV s communications settings are as follows Baud rate 9 600 bps 8 bits Data length Parity bit None Stop bit 1 bit Flow control None Communication procedure Send the control commands from the PC via the RS 232C connector The TV operates according to the received command and sends a response message to the PC Do not send multiple commands at the same time Wait until the PC receives the OK response before sending the next command Command format Eight ASCII codes CR C1 C2 C3 C4 P1 P2 P3 P4 Command 4 digits Parameter 4 digits Return code Command 4 digits Command The text of four characters Parameter 4 digits Parameter 9 x blank 7 Parameter Input the parameter values aligning left and fill with blank s for the remainder Be sure that four values are input for the parameter When the input parameter is not within an adjustable range ERR returns Refer to Response code format 9 010 170 1 9 1 30 110
31. ct the desired language Multimedia and Hypermedia Expert Group application available for the service and then press OK encoded letting you experience DTV interactively NOTE When provided the MHEG5 application will start when e Once you tune to another service or the power is turned you press off the setting returns to the parameter set in the Sample MHEGS5 screen Language menu page 23 Displaying subtitles Set the desired language for the subtitle display and enable disable the subtitle display Weather 11 37 25 feb Banbury 1 Press when no other menu screen is Kaap displayed Margate Bracknell Subtitle Gatwick Tunbridge Wells Dover Hastings Brighton Subtitle Page 1 of 9 SHORTCUTS CA 5161 11 av Select DTV MENU u NOTE 2 dies AT area EE 28 gt ze e When Subtitle is set to On and the TV is tuned to a S Gi 8012119118905194212 78 Ining service containing both MHEG5 and subtitle data the stream and then press V subtitle takes priority and subtitle presentation starts 3 Select Subtitle press lt gt to select On or automatically In this case press to start the MHEGS presentation Off e A confirmation message displays d Press to select Yes and then press OK 68 31 Appendix Problem Possible Solution No power 9 Check if you pressed 0 on the remote control unit See page 8 If the indicator on the TV lights up red
32. cture Contrast Off DYNAMIC For a clear cut image emphasising high contrast for sports viewing Enhanced Picture Contrast On NOTE e You can also select AV Mode options by pressing AV MODE on the remote control unit e You can adjust the factory preset parameters given in STANDARD SOFT ECO and DYNAMIC The parameters chosen affect each of the input sources e The items marked with are only available for TV DTV AV input mode e Enhanced Picture Contrast technology detects the source video characteristics and smoothly adjusts the screen brightness accordingly enabling deeper black levels For more sharpness Menu operations TV DTV AV only Advanced Menu Operation C page 12 This TV provides various advanced functions for optimising the picture quality Colour Temp Black 30 Y C Monochrome Film Mode Colour Temp Adjust the colour temperature to give the best white image Item High White with bluish tone Mid High Intermediate tone between High and Middle Middle Natural tone Mid Low Intermediate tone between Middle and Low Low White with reddish tone Black For easier viewing change the viewing depth by selecting a level for automatically adjusting the dark portion of an image 3D Y C Provide high quality images with minimal dot crawl and cross colour noise by detecting changes in the image Item Off No detecting Standard Nor
33. e Menu operations Lock You can block the viewing of any channel NOTE e See Child Lock for setting PIN e When Lock is set to On for a channel Child lock has been activated displays and the image and sound of the channel are blocked e When pressing OK while Child lock has been activated displays PIN input menu will display Inputting the correct PIN lifts the child lock temporarily until the power is turned off Sort Channel positions can be sorted freely Repeat steps 1 to 4 in Programme Setup Press to select Yes and then press OK Press to select the channel you want to move and then press OK Press A W lt d p to move it to the desired position and then press OK a WAN Repeat steps 3 and 4 until all desired channels are sorted Erase Programme An individual programme can be erased 1 Repeat steps 1 to 4 in Programme Setup 2 Press to select Yes and then press OK 3 Press to select the channel you want to erase and then press OK A message screen pops up 4 Press lt gt to select Yes and then press OK to erase the selected programme All the subsequent programmes move up 5 Repeat steps 3 and 4 until all desired channels are erased Child Lock Allow you to use a PIN to protect certain settings from being accidentally changed Changing the PIN 1 Press MENU and the MENU screen d
34. e EXT 2 terminal of the TV using the fully wired SCART cable SCART cable SCART cable Decoder EXT 1 or 2 NOTE e TV VCR advanced AV Link systems may not be compatible with some external sources e TV OUT from EXT 1 is not outputted when EXT 6 HDMI EXT 7 HDMI or DTV is selected as the input Connecting a game console or camcorder A game console camcorder and some other audiovisual equipment are conveniently connected using the EXT 3 terminals S video cable Or E Composite woe i video cable AUDIO cable Camcorder Game console NOTE e EXT 3 The S VIDEO terminal has priority over the VIDEO terminals Connecting a DVD player You can use the EXT 2 3 5 6 HDMI or 7 HDMI terminals when connecting to a DVD player and other audiovisual equipment S video cable Or I Is 4 13 Composite video cable AUDIO cable E DVD player NOTE e EXT 3 The S VIDEO terminal has priority over the VIDEO erminals Component cable 5 BD H AUDIO cable MEKIN DVD player When using an HDMI DVI conversion adapter cable input the Audio signal here not use EXT 7 AUDIO R L HDMI DVI conversion adapter cable NOTE e When connecting an HDMI DVI conversio
35. e vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the ife of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed e The LCD panel used in this product is made of glass Therefore it can break when the product is dropped or impact applied If the LCD panel is broken be careful not to be injured by broken glass e Heat sources Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers To prevent fire never place any type of candle or naked flames on the top or near the TV set e To prevent fire or shock hazard do not place the AC cord under the TV set or other heavy items e Do not display a still picture for a long time as this could cause an afterimage to remain e There is power consumption always if main plug is connected Servicing Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request a qualified person to perform servicing
36. ement Setup menu Auto Installation Programme Setup Auto Search Manual Adjust Fine Colour sys Sound sys Broadcasting system Label Skip Decoder Lock Useful features DTV menu operations Useful features DTV Appendix Child Lock Input Label Position WSS Wide Screen Signalling 4 3 Mode Fine Sync XGA Mode Language Supply Voltage Option menu Audio Only DNR Digital Noise Reduction HDMI Setup Input Select Colour System WIDE MODE Still image Teletext function DTV menu operation buttons DTV On Screen Display DTV common operations About using the character set screen Language Programme Setup Installation Auto Installation Carrier Scan Carrier Setup System Setup OSD Setup Child Lock Accessories Version Software Version Software Upgrade Common Interface Inserting a CA card Supplying power to the antenna About EPG Using the EPG Using the EPG Timer Using the ESG Using the digital programme list Viewing a service banner Using the multi audio function Displaying subtitles Using the MHEGS application UK only Troubleshooting PC compatibility chart RS 232C port specifications Specifications Opt
37. ery broadcast VCR or DVD containing the WSS information WSS menu To enable Auto Selection set WSS in the Setup menu to On See page 18 4 3 Mode menu To set the type of the wide screen select Normal or Panorama in the 4 3 Mode menu See page 18 4 3 Mode set to Normal 4 3 Mode set to Panorama NOTE e f the signal contains no WSS information Auto Selection will not function even when the WSS option is enabled WIDE MODE You can select the picture size 1 Press 88 e The WIDE MODE menu displays 2 Press or A F to select a desired item on the menu NOTE e Connect the PC before making adjustments See page 10 e Selectable picture size may vary with input signal type EXAMPLE Normal Full Item Normal Keeps the original aspect ratio in a full screen display Full An image fully fills the screen Useful features You can freeze a motion picture on the screen 1 Press 2 Press again to exit still image NOTE e When this function is not available No still image display available will display e The still image automatically goes out after 30 minutes Teletext function What is Teletext Teletext broadcasts pages of information and entertainment to specially equipped television sets Your TV receives Teletext signals broadcast by a TV network and decodes them into graphical format for viewing News wea
38. esired item and then press OK Menu operations MENU Picture adjustments Picture Menu Operation B page 12 M Picture picture settings AV Mode STANDARD 8 0 Backlight 6 8 Selectable Contrast 30 items lt button Adjust the picture to your preference with the following Adjustment items button Brightness 0 0 Backlight The screen dims The screen brightens Colour 0 C O 30 Contrast For less contrast For more contrast Tint 0 EO OE Brightness For less brightness For more brightness Sharpness 0 0 10 For less colour intensity Colour Advanced For more colour intensity Reset Tint Skin tones become purplish Skin tones become greenish Sharpness For less sharpness AV Mode Menu Operation A page 12 AV Mode gives you several viewing options to choose from to best match the system environment which can vary due to factors like room brightness type of programme watched or the type of image input from external equipment Item STANDARD For a highly defined image in a normally bright room Enhanced Picture Contrast On SOFT Creates a softer image Enhanced Picture Contrast On ECO Reduces power consumption Enhanced Picture Contrast Off USER Allows the user to customise settings as desired You can set the mode for each input source Enhanced Pi
39. f the power to the TV unplug the AC cord from the AC outlet However do not unplug the AC cord unless otherwise instructed Display status indicator Power off The TV is in standby mode The TV is on NOTE e If you are not going to use this TV for a long period of time be sure to remove the AC cord from the power outlet e Weak electric power is still consumed even when is turned off In DTV input mode if the power is turned off immediately after a setting change from the menu screen the new setting or channel information may not be memorised Initial auto installation Analogue When the TV is powered on for the first time after purchase the initial auto installation Analogue is invoked You can automatically set language country and channels in successive operations NOTE e The initial auto installation functions only once If the initial auto installation is not completed ex When menu screen disappeared by not operating for a few minutes when the power shut down etc try Auto Installation from the Setup menu See page 15 e The initial auto installation stops by pressing RETURN 1 Setting the on screen display language Press to select the desired language listed on the screen Press OK to enter the setting 2 Setting the country or area Press to select your country or area listed on the screen Press OK to enter the setting e The prog
40. for locked services or when Child Lock applies See pages 24 and 27 e Up to 8 events can be preset using the Timer function e f you are watching another event an alarm message displays on the screen a few seconds before the preset time e An alert message displays when the preset events overlap one another e The TV power may not come on for several seconds if you preset an event using the EPG Timer and if the AC cord has been disconnected e When you set the EPG Timer the power consumption during the standby mode will be higher 83 W or more than normal e When the TV is turned off the EPG Timer will not operate When using the EPG Timer for recording e Make sure to set the timer of your recording equipment as well e Do not switch channels while recording e If the TV is in standby mode when the preset on air time nears it will output signals for recording without displaying images on the screen GB 29 68 30 Useful features DTV The Electronic Service Guide ESG is a simplified version of EPG giving you only essential information of current events for faster access 1 Press ESG e The ESG screen displays ESG Sun 16 04 2005 07 05 11 070 BBC News 16 04 2005 07 00 07 30 The Bold and Beautiful Current Event _ BBC 1 8802 CBBC Channel 1 Services BBC News Page Page Select OK DIVMENU i gt END RADIO TV Radio 2 Press to select a des
41. hen press OK The highlight moves to the selected service Erase Erase the selected service s from the memory 1 Press to select the desired service 2 Press on the remote control An icon displays indicating the service to be erased Pressing will turn the erase icon on and off Do not press END to exit the screen here if you wish to register the change 3 Press OK Aconfirmation message displays 4 Press lt gt to select Yes and then press OK Label Change individual service names 1 Press to select the desired service 2 Press on the remote control A character set screen displays 3 Enter new name for the service See page 23 for operations using the character set screen View Tune to the service shown in the picture window 1 Press to select the desired service 2 Press on the remote control e The image shown in the picture window changes 3 Press END to exit the Programme Setup screen to view the image in full screen Installation This section describes how to reconfigure the DTV settings after conducting Initial auto installation DTV on page 8 Auto Installation The TV automatically detects and stores all available Services in your area See Initial auto installation DTV on page 8 for details NOTE If the TV detects a new carrier service that has become available after performing Auto Installation the message Do you want to s
42. inarily the TV automatically adjusts image positions coming from PC Auto Sync function In some cases however manual adjustment is needed to optimise the image Item H Pos Centres the image by moving it to the left or right V Pos Centres the image by moving it up or down Clock Adjusts when the image flickers with vertical stripes Phase Adjusts when characters have low contrast or when the image flickers NOTE e If you need to adjust the image position adjust the position using your PC XGA Mode Menu Operation C page 12 You can select one of the 3 input signals listed below to adjust the picture resolution when the PC input is an XGA signal 1024 x 768 1280 x 768 1360 x 768 NOTE e Depending on the graphics card resolutions of 1360 x 768 may not display correctly Language Menu Operation A page 12 You can select a language from the Setup menu Select desired language listed on the screen Supply Voltage Menu Operation A page 12 Switch on or off the power to the antenna connected to the antenna input terminal 5566 page 4 MENU op Audio Only DNR Off CVBS AUTO Input Select Colour System NOTE e HDMI Setup is displayed only when EXT6 or EXT7 is selected from the INPUT SOURCE menu Audio Only Menu Operation A page 12 When listening to music from a music programme you can set the TV off and enjoy audio only
43. ional accessory End of life disposal 2107 53 zj Wa A IO Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product To ensure safety and many years of trouble free operation of your product please read the Important Safety Precautions carefully before using this product Important Safety Precautions e Cleaning Unplug the AC cord from the AC outlet before cleaning the product Use a damp cloth to clean the product Do not use liquid cleaners or aerosol cleaners e Water and moisture Do not use the product near water such as bathtub washbasin kitchen sink laundry mb swimming pool and in a wet basement e Do not place vases or any other water filled containers on this product The water may spill onto the product causing fire or electric shock e Stand Do not place the product on an unstable cart stand tripod or table Doing so can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer e When relocating the product placed on a cart it must be moved with utmost care Sudden stops excessive force and uneven floor surface can cause the product to fall from the cart e Ventilation Th
44. ired service and then press OK e The TV will show the image in full screen NOTE e Basic operation procedures are similar to EPG operations e ESG does not provide information about future events or access to Timer function Using the digital programme list Select services by using the Programme List instead of using numeric buttons or P N V 1 Press OK when no other menu screen is displayed Except when an external input source is selected m 001 CBBC Channel BBC News Programme List Fav Type S No Services Carrier BBC Freq 538000 kHz FFT 8 GI 1 8 UK Gold GAM bs Dn MENU OK END 4 Select RADIO TV Radio Currently tuned service Service shown in picture window 2 The screen shows the service list in either TV or Radio mode sorted by favourite type All Fav 1 4 as configured in page 24 3 Press to select the desired service and then press OK e The image shown in the picture window changes 4 Press END to exit the Programme List to watch the image in full screen Viewing a service banner A service banner shows event names start end time of event and other useful information 1 Press Service banner Logical channel number Service name Carrier name Favourite type Teletext available Subtitle available Lock status Scrambled service Multi audio status Current event name Current date and time MHEGS service available
45. iscard of this product please contact your local authorities and ask for the correct method of disposal Pb The battery supplied with this product contains traces of Lead For EU The crossed out wheeled bin implies that used batteries should not be put to the general household waste There is a separate collection system for used batteries to allow proper treatment and recycling in accordance with legislation Please contact your local authority for details on the collection and recycling schemes For Switzerland The used battery is to be returned to the selling point For other non EU countries Please contact your local authority for correct method of disposal of the used battery LC 37D44E LC 37D44S 903 8 903 8 77 AQUOS 824 4 824 4 20 22188 I Pats 1010 0202 Y A OCH is 465 0 200 0 200 0 mmm OO lil oo NN S D ES ER re SHARP SHARP ELECTRONICS Europe GmbH SonninstraBe 3 D 20097 Hamburg SHARP CORPORATION Printed on environmentally friendly paper a Auf 6kologischem Papier gedruckt Imprim sur papier cologique Stampato su carta ecologica oop Afgedrukt op ecologisch papier CJ I
46. isplays 2 Press to select Setup 3 Press to select Child Lock and then press OK Change PIN Reset New PIN Reconfirm 4 Enter the 4 digit number as a PIN using 0 9 5 Enter the same 4 digit number as in step 4 to confirm e The system PIN has been changed successfully displays NOTE e To view a locked channel you must enter a PIN See this page and page 27 for locking channels from viewing in analogue TV and DTV mode When you select a locked channel a PIN prompt message pops up Press OK to display the PIN input window Resetting the PIN Allow you to reset your PIN to the factory preset 1234 1 Repeat steps 1 to 3 in Changing the PIN 2 Enter the PIN 3 Press A V to select Reset and then press OK 4 Press to select Yes and then press OK NOTE As a precautionary measure make a note of your PIN on the back of this operation manual cut it out and keep it in a safe place that children cannot reach e See page 32 for resetting the current PIN to the factory preset 1234 if you lose or forget your PIN Input Label You can assign each input source a label you like Press ZS to select the desired input source Press MENU and the MENU screen displays Press lt gt to select Setup Press to select Input Label and then press OK Press A W lt d p to select each character of the new name for the inp
47. l are the ratings used exclusively in France e X rated is the rating used exclusively in Spain For details about ratings see page 34 Accessories Check the version information of the digital module and allow it to be upgraded when available Version Software Version Press to select Accessories 1 2 Press amp to select Version and then press OK e The software version is displayed Software Upgrade The software for controlling the built in DTV decoder can be upgraded when necessary In Great Britain and Sweden this can be achieved via an Over Air Download Preparation Confirm and make a note of the current software version number as in step 2 of Version Software Version Manual upgrade 1 Press to select Accessories 2 Press 10 select Software Upgrade and then press OK The TV checks all carriers if there is a new software available for upgrade If upgrade via Over Air Download is available at the time A confirmation message appears asking you to accept the upgrade or not To download now press lt b gt to select Yes and then press OK After the upgrade is completed the TV restarts automatically with the new software version installed To postpone the download press 4 to select No and then press OK Enter the download time for more convenient time as instructed The software upgrade will not be c
48. lease contact your local authority for further details If your used electrical or electronic equipment has batteries or accumulators please dispose of these separately beforehand according to local requirements By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling 2 In other Countries outside the EU If you wish to discard this product please contact your local authorities and ask for the correct method of disposal For Switzerland Used electrical or electronic equipment can be returned free of charge to the dealer even if you don t purchase a new product Further collection facilities are listed on the homepage of www swico ch or www sens ch B Information on Disposal for Business Users 1 In the European Union If the product is used for business purposes and you want to discard it Please contact your SHARP dealer who will inform you about the take back of the product You might be charged for the costs arising from take back and recycling Small products and small amounts might be taken back by your local collection facilities For Spain Please contact the established collection system or your local authority for take back of your used products 2 In other Countries outside the EU If you wish to d
49. mal adjustment Fast Set the optimum image quality for fast moving images Slow Set the optimum image quality for slow moving images NOTE e 3D Y C may not operate depending on the input signal type or noisy input signal e 3D Y C has even more effect on composite video signals CVBS Monochrome For viewing a video in monochrome NOTE e When Monochrome is set to On the DTV Menu screen displays in monochrome Film Mode Automatically detect a film based source originally encoded at 24 25 frames second depending on the vertical frequency analyses it then recreates each still film frame for high definition picture quality io menu MENU Audio AV Mode Power Control STANDARD 15 Wm 15 15 86 off off off Treble 0 Bass 0 Balance 0 Surround Auto Vol Clear Voice Reset AV Mode Menu Operation A page 12 This option links to AV Mode in the Picture menu See page 13 Audio adjustments Menu Operation B page 12 You can adjust the sound quality to your preference with the following settings Selectable items Treble lt button button For weaker treble For stronger treble Bass For weaker bass For stronger bass Decrease audio from the left speaker Decrease audio from the right speaker Balance Menu operations Surround Menu Operation A page 12 Surround function allows
50. mpreso en papel ecol gico Impresso sobre papel ecol gico PIN Printed in Poland Gedruckt in Polen Imprim en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia Impresso na Pol nia TINS D792WJZZ 08P07 PL NG
51. n adapter cable to the HDMI terminal the image may not come in clearly Using external equipment Connecting a decoder You can use the EXT 1 terminal when connecting a decoder and other audiovisual equipment EXT 1 SCART cable Decoder NOTE In cases when the decoder needs to receive signal from the TV make sure to set Decoder to EXT1 in the Programme Setup Manual Adjust menu See page 16 e Do not connect the decoder to the EXT 2 terminal Connecting a PC Use the EXT 4 terminals to connect a PC EXT 4 RGB cable Using AV Link function This TV incorporates three typical AV Link functions for smooth connections between the TV and other audiovisual equipment One Touch Play While the TV is in standby mode it automatically turns on and plays back the image from the audiovisual source e g VCR DVD WYSIWYR What You See Is What You Record When the remote control unit of the connected VCR has the WYSIWYR button you can automatically start recording by pressing the WYSIWYR button Preset Download Automatically transfers the channel preset information from the tuner on the TV to the one on the connected audiovisual equipment e g VCR via the EXT 2 terminal NOTE e Refer to operation manuals of each external equipment for the details e Only works when the audiovisual equipment is connected to
52. nt view Ol bal Remote control sensor 5 Standby On indicator TV Rear view lt Volume buttons __ 1 Power button P V A MENU button Programme channel buttons Input Source button 1r 6 R AUDIO L 7 xr Tor RGB RGB AUDIO R L 1 27 9 AUDIO R L WARNING Make sure that the volume is turned down before using or connecting 1 2320 terminal 7 OUTPUT AUDIO terminals earphones and headphones 2 EXT 4 ANALOGUE RGB AUDIO 8 EXT 6 HDMI AUDIO terminals Listen to audio at moderate levels terminals 9 EXT 7 HDMI terminal Excessive sound pressure from 3 EXT 5 COMPONENT terminals 10 COMMON INTERFACE slot earphones and headphones can 4 EXT 1 RGB terminal 11 EXT 3 terminals 5 EXT 2 RGB terminal 12 Headphone jack cause hearing loss 6 Antenna input terminal 13 AC INPUT terminal DVB T 5V 80 mA NOTE e Only if you use an active terrestrial antenna select On 5V under Supply Voltage See page 18 Quick guide Turning on the power Press on the TV or on the remote control unit Standby mode Press on the remote control unit when the TV is on e The TV enters standby mode and the image on the screen disappears The indicator on the TV changes from green to red To completely turn of
53. ogramme Setup e To configure various settings for each service These include Fav ourite Lock Move Move To Skip Select Erase Label and View functions Installation e To scan all services available in your area or to label erase re scan the selected carrier System Setup e To configure On Screen Display and Child Lock settings Accessories e To display the current version of the software or to allow the software upgrade to take place Common Interface e To display the current Common Interface details Navigation buttons e To navigate within the DTV Menu screen DTV common operations DTV common menu operation Press DTV or 2 to access the DTV mode Press DTV MENU and the DTV Menu screen displays Press to select the desired menu and then press OK if necessary e From this point menu operations differ depending on the item you are going to adjust See the respective section of the menu operation e You cannot select any DTV related menu items unless Auto Installation has been completed e Press RADIO to switch between DTV and Radio mode e To exit the current screen without saving the change press END DTV menu operations About using the character set screen In some cases you may be prompted to enter characters See below for details Sample Alpha Numerical Character Set screen Alpha Numerical Character Set S E 1 4 5 6 8 lt A c G
54. ow IMPORTANT The wires in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug proceed as follows e The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black e The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug Before replacing the plug cover make sure that e H the new fitted plug contains a fuse its value is the same as that removed from the cut off plug e The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires IF YOU HAVE ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN OPERATION MANUAL ENGLISH from the actual operations e The factory preset PIN is 1234 e The models LC 37D44E BK and LC 37D44S BK feature a black cabinet e The models LC 37D44E GY and LC 37D44S GyY feature a silver cabinet The illustrations and the OSD On Screen Display in this operation manual are for explanation purposes and may vary slightly TV AV only TV DTV AV only these icons used throughout this manual indicate Contents the menu item can be set or adjusted only in the selected input mode 0111
55. r is on Common Scrambled Broadcasting service can be routed via the CA system If the CA system on the Cl module requires a smart card reader this reader shall be part of the Cl module CI Module When the compatible CA card is inserted you can view the programme without any operations Interface e The Cl module name is displayed IRDETO DTV MENU 2 Press OK to access the Cl menu CA card e Detailed information on the CA card in use is displayed 3 Press to select the item and then press Common OK Interface Module e Detailed information on the selected item is displayed When the compatible card is not inserted 0 Select the programme which needs the compatible CA card e The caution screen appears Insert the compatible CA card e The caution screen disappears and you can view the programme CA system supported by Crypto Works Aston CAM VlAccess Nagra Vision Irdeto MR CAM NOTE e To view paid TV broadcasting you need to make a contract with a service provider Please contact a service provider for details e The Common Interface Module and the CA card are neither supplied nor optional accessories Supplying power to the antenna You may choose to supply power through the antenna terminal See page 4 NOTE e This function is enabled using the Analogue Menu See page 18 for details 68 28 Useful features DTV About EPG With the Electronic
56. ramme auto search starts at the same time After this setting auto search starts with the following order Programme auto search Auto labelling Auto sorting Preset download You do not need to do anything during the auto search The setup menu disappears and you can watch the programme on channel 1 Using the analogue programme list You can also select the desired channel from programme list instead of using 0 9 numeric buttons or P N V 1 Press OK when no other menu screen is displayed Except when an external input source is selected N Press amp to select the desired channel to tune in and then press OK Press END to exit the Programme List Initial auto installation DTV Digital Video Broadcasting is a transmission scheme It is much more than a simple replacement for existing analogue television transmission DVB provides more stations clearer picture quality and other services displayed on the screen It also allows a range of new features and services including subtitles and multiple audio tracks To watch DTV broadcasts follow the procedures below to scan all available services in your area Press DTV or to access the DTV mode Press DTV MENU and the DTV Menu screen displays Press to select Installation AO 3 Press to select Auto Installation and then press OK If you have already set the PIN enter it here If no
57. roduction units There may be some deviations from these values in individual units NOTE e Refer to inside back cover for dimensional drawings Optional accessory The listed optional accessories are available for the LCD colour TV Please purchase them at your nearest shop Wall mount bracket e Additional optional accessories may be available in near SrO AE future When purchasing please read the newest catalogue for compatibility and check the availability Part name Part number AN 37AG5 36 Attention Your product is marked with this symbol It means that used electrical and electronic products should not be mixed with general household waste There is a separate collection system for these products A Information on Disposal for Users private households 1 In the European Union Attention If you want to dispose of this equipment please do not use the ordinary dust bin Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment recovery and recycling of used electrical and electronic equipment Following the implementation by member states private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one P
58. ss MENU and the MENU screen displays 2 Press lt gt to select Setup 3 Press to select Programme Setup and then press OK If you have already set the PIN under Child Lock enter it here e See page 17 for setting PIN 4 Press to select Auto Search Manual Adjust Sort or Erase Programme and then press OK Auto Search Manual Adjust Sort Erase Programme Auto Search You can automatically search for and download TV channels by performing the procedure below This is the same function as from programme auto search to preset download in Auto Installation 1 Repeat steps 1 to 4 in Programme Setup 2 Press lt gt to select Yes and then press OK Programme auto search 2 Auto labelling 3 Auto sorting Preset download Manual Adjust You can set some channel items manually MENU Setup Programme Setup Fine 179 25 AUTO B G SAT 1 Skip Off Decoder Off Colour sys Sound sys Label Lock Off Repeat steps 1 to 4 in Programme Setup Press to select Yes and then press OK Press to select the channel you want to edit and then press OK e The selected channel information displays 4 Press 10 select the desired menu item and then press OK 5 Press to select or adjust NOTE e When you exit Programme
59. station that provides a set of individual services OSD Setup 1 Press lt gt to select Installation The On Screen Display appearance and the position 2 Press A V to select Carrier Setup and then duration of the service banner information can be press OK customised If you have already set the PIN enter it here If 1 Press lt gt to select System Setup not enter the factory preset PIN 1234 2 Press amp to select OSD Setup and then Carrier Setup press OK OSD Setup S No Carrier Name Frequency TV 001 BBC 538000 Banner timeout Banner position Transparency Label Erase AY 4h Select DTV MENU AW Select DTV MENU TO e E 3 Press to select the desired item Select the carrier and then press RED Label 4 Press lt p gt to select the desired parameter and The character set screen displays then press OK Enter a new name for the carrier See page 23 for details on using the character set screen 5 A confirmation message displays Press lt gt To erase the selected carrier to select Yes and then press OK to save the Select the carrier and then press GREEN Erase change An icon displays indicating the carrier to be erased OSD Setup Pressing GREEN will turn the erase icon on and off fame Selectable items Description Press OK A confirmation message displays Banner 1 Sec 2 Secs Select how long the Press to select Yes
60. stem e g PAL SECAM NTSC3 58 NTSC4 43 and PAL 60 cannot be selected in TV tuner mode GB 19 68 20 Useful features WIDE MODE You can select the picture size Selectable picture size varies with the type of signal received Item for SD Standard Definition signal Normal For 4 3 standard pictures A side bar appears on each side Zoom 14 9 For 14 9 letterbox pictures A thin side bar appears on each side and you may see bars on the top and bottom with some programmes Panorama In this mode the picture is progressively stretched toward each side of the screen Full For 16 9 squeeze pictures Cinema 16 9 For 16 9 letterbox pictures Bars may appear on the top and bottom with some programmes Cinema 14 9 For 14 9 letterbox pictures Bars may appear on the top and bottom with some programmes Item for HD High Definition signal Full Display with the Overscan image Crop all sides of screen Manual Selection 1 Press 88 e The WIDE MODE menu displays e The menu lists the wide mode options selectable for the type of video signal currently received 2 Press or A F while the WIDE MODE menu displays on the screen e As you toggle down the options each is immediately reflected on the screen No need to press OK Auto Selection If you set WSS and 4 3 Mode in the Setup menu on page 18 the optinum WIDE MODE is automatically chosen for ev
61. t enter the factory preset PIN 1234 e See page 17 for setting PIN e A confirmation message displays Press lt p gt to select Yes and then press OK to start the search 5 The TV starts scanning all available DTV and radio services in your area NOTE e The language and country settings used in this operation are the settings you have already set while executing the Initial auto installation Analogue you want to reconfigure the country setting for instance after moving to another country conduct Auto Installation from the Setup menu again The services are stored according to the channel number information embedded in the stream if available If the information is not available the services are stored according to the order in which they were received If you would like to sort the order it is possible to arrange it as explained in page 24 To cancel the scan in progress press END You cannot select any DTV related menu items unless Auto Installation has been completed Using external equipment Setting the input source To view external source images select the input source using on the remote control unit or the TV NOTE e The cables marked with are commercially available items Connecting a VCR You can use the EXT 1 or 2 terminals when connecting a VCR and other audiovisual equipment If your VCR supports TV VCR advanced AV Link systems you can connect the VCR to th
62. the EXT 2 terminal on the TV with AV Link via a fully wired SCART e The use of the AV Link function is only possible if the TV set has enforced a complete auto installation with the connected audiovisual equipment page 8 Initial auto installation 3 5 stereo minijack cable RGB DVI conversion cable AUDIO R L 0 3 5 mm stereo minijack cable NOTE e The cables marked with are commercially available items e The PC input terminals are DDC1 2B compatible e Refer to page 33 for a list of PC signals compatible with the TV When connecting to a PC the correct input signal type is automatically detected he availability of the AV Link function depends on the audiovisual equipment used Depending on the manufacturer and type of equipment used it is possible that the described functions may be completely or partially unusable Menu operations Menu operation buttons On Screen Display Use the following buttons on the remote control unit to Example operate the menu MENU Opti Colour System Audio Only AVMODE RADIO SURROUND e Input Select ey AUTO Colour System 3 3 Item displayed in white e This indicates an item can be selected Item displayed in yellow e This indicates the item currently selected Item in brackets e This indicates the current setting for the item
63. ther and sports information stock exchange prices and programme previews are among the many services available Turning on and off Teletext 1 Select a TV channel or external input source providing the Teletext programme 2 Press to display the Teletext 3 Press again to display the Teletext on the right screen and normal image on the left screen e Each time you press the screen switches as shown below May appear in DTV input mode e f you select a programme with no Teletext signal No Teletext available displays e The same message displays during other modes if no Teletext signal is available NOTE e Teletext will not work if the selected signal type is RGB See page 19 Time display You can display the time information included in the DTV and Teletext broadcasts NOTE e Skip step 1 if receiving DTV broadcasts 1 Select a TV channel providing Teletext information The time information is automatically captured 2 Press GD The channel display will appear on the TV 3 Press again within the several seconds that the channel display is on the screen Time information will display below the channel display for several seconds 4 Even when you change the TV channel you can display the time information with steps 2 and 3 above NOTE e The time display cannot be stored once the power is turned off When you turn on the power perform steps 1 to 4 again e f
64. ting and screen TELETEXT TV DTV Display the programme list 10 Cursor See pages 8 and 30 Select a desired item on the setting 14 SURROUND 26 RETURN screen Switch the surround effects on and off Return to the previous menu screen 11 END See page 15 27 Subpage Exit the menu screen 15 RADIO See page 21 12 Reveal hidden Teletext SC and DIM 28 Subtitle for Teletext See page 21 16 a M te TV External To turn the subtitles on and g ute 13 F Hold sae off See page 21 ee Switch the sound on and off DTV Display the subtitle selection See page 21 screen See page 31 29 Colour Red Green Yellow Blue i TELETEXT Select a page See page Using XZ on the remote control unit 21 DTV mode DTV The coloured buttons are used to ee f select correspondingly to the coloured Press Mirr to open the multi audio screen See page 31 items in the menu screen Analogue TV mode Each time you press Zu the mode switches as illustrated in the following tables NICAM TV broadcasts selection Selectable items Stereo NICAM STEREO MONO A2 TV broadcasts selection Selectable items Stereo STEREO MONO Bilingual NICAM CH A NICAM CH B NICAM CH AB MONO Monaural NICAM MONO MONO NOTE e When no signal is input the sound mode will display MONO CH A CH B CH AB MONO Bilingual Monaural Quick guide TV Fro
65. ture M Picture E Audio AV Mode STANDARD EEE E C EET 30 EET EE 30 10 Backlight 6 Contrast 30 Brightness 0 Colour 0 Tint 0 Sharpness 0 Advanced Reset Press to select the desired item and then press OK STANDARD SOFT Lee USER DYNAMIC Menu Operation B 8090 Press MENU and the MENU screen displays Press to select the desired menu Press to select the desired menu item Example Backlight Contrast etc Press to adjust the item to your desired position e Select Reset to reset all adjustment items to the factory preset values MENU Picture Backlight AV Mode STANDARD 8 Backlight Contrast 30 0 pen 40 6 8 30 30 EE 30 ey Brightness 0 Colour 0 Tint 0 Sharpness 0 Advanced Reset Menu Operation C Press MENU and the MENU screen displays Press lt gt to select the desired menu Press to select the desired menu item and then press OK Example Advanced etc Press to select the desired menu item and then press OK Example Colour Temp Black etc e Select Reset to reset all adjustment items to the factory preset values Colour Temp Black 30 Y C Monochrome Film Mode Press to select or adjust the d
66. ut signal type selected correctly after connection See page 19 5 the correct input source selected See page 9 Is non compatible signal being input Gee page 33 5 picture adjustment correct See pages 13 and 14 5 the antenna connected properly See page 4 s On selected in Audio Only See page 18 No sound 5 the volume too low See pages 6 and 7 ake sure that headphones are not connected See page 7 Check if you pressed 1 on the remote control unit See page 6 Ihe DTV menu screen is displayed Check if Monochrome is set to On If so set it to Off See page 14 in monochrome and hard to select the item The TV sometimes makes a This is not a malfunction This happens when the cabinet slightly expands and cracking sound contracts according to change in temperature This does not affect the TV s performance Cautions regarding use in high and low temperature environments e When the unit is used in a low temperature space e g room office the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal e Do not leave the unit in a hot or cold location Also do not leave the unit in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the LCD panel to malfunction Storage temperature 20 C to 60 C IMPORTANT NOTE ON RESETTING
67. ut source and then press OK a 6 Repeat step 5 above until the name is fully spelt out and then press OK e The name can be 6 characters or less e f alabel name is less than 6 characters select END then press OK NOTE e You cannot change the label if the input source is TV or DTV GB 17 Menu operations TV DTV AV only Position Menu Operation C page 12 For adjusting a picture s horizontal and vertical position Item H Pos Centres the image by moving it to the left or right V Pos Centres the image by moving it up or down NOTE e Adjustments are stored separately according to input source e Depending on the input signal type a position setting may not be available WSS Wide Screen Signalling Menu Operation A page 12 WSS allows a television to switch automatically among the different screen formats NOTE e Use WIDE MODE if an image does not switch to the correct screen format When the broadcast signal contains no WSS information the function will not work even if enabled See page 20 4 3 Mode Menu Operation A page 12 The WSS signal has 4 3 auto switching that allows you to select between Normal and Panorama TV DTV AV only Item Normal Normal range keeping 4 3 or 16 9 aspect ratio Panorama Wide image without side bars WSS signal 4 3 screen 4 3 mode Normal PC only Fine Sync Menu Operation C page 12 Ord
68. w Audio Select Digital Analogue Select Digital for audio signal via the HDMI terminal Select Analogue for audio signal via the AUDIO jack NOTE Refer to your external equipment operation manual for the signal type Items marked may be greyed out with Q depending on the type of signal input from the external equipment e Item marked is only available when EXT6 is selected Input Select Menu Operation A page 12 For setting the signal type of external equipment Input source Signal type Y C CVBS RGB Y C CVBS RGB EXT 1 EXT 2 NOTE e If no colour image displays try to change the other signal type e Check the operation manual of the external equipment for the signal type e TV EXTS EXT4 EXT5 EXT6 and EXT7 are not displayed in Input Select e If both CVBS and RGB signals are input to EXT 1 or EXT 2 using a SCART cable the TV may output an RGB signal even though you have designated CVBS for the respective terminal This happens due to the setting of your external equipment TV AV only Colour System Menu Operation A page 12 You can change the colour system to one that is compatible with the image on the screen AUTO PAL SECAM NTSC3 58 NTSC4 43 PAL 60 NOTE Factory preset value is AUTO e If AUTO is selected colour system for each channel is automatically set If an image does not display clearly select another colour sy
69. worn out Chemicals that leak from batteries can cause a rash If you find any chemical leakage wipe thoroughly with a cloth e The batteries supplied with this product may have a shorter life expectancy due to storage conditions e If you will not be using the remote control unit for an extended period of time remove the batteries from it Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor Objects between the remote control unit and sensor may prevent proper operation Cautions regarding the remote control unit e Do not expose the remote control unit to shock In addition do not expose the remote control unit to liquids and do not place in an area with high humidity Do not install or place the remote control unit under direct sunlight The heat may cause deformation of the unit e The remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or strong lighting In such case change the angle of the lighting or TV or operate the remote control unit closer to the remote control sensor Quick guide Remote control unit a 4 Standby On 17 DTV Enter standby mode or turn on the Press to access DTV mode while power See page 8 watching other input sources and vice This button will not work if you were Select a vid tting S 13 eleta

Sharp LC-37D44E-BK LCD TV

Contents

Download Pdf Manuals

Related Search

Related Contents