Modecom MC-S300 PFC power supply unit
Contents
1. MODE COM IMPULS POWER SUPPLY x INSTRUCTION MANUAL NSDTALLANUO NIO Tr NCO V E Step 1 Unplug every power plug from the computer Step 2 Take the case off the computer Step 3 Disconnect all power connectors of the current power supply Step 4 Unscrew four mounting screws at the back of the computer which fix the power supply to the computer case Step 5 Screw on the new power supply to the computer case Step 6 Connect the connectors of the new power supply to appropriate de vices inside the computer AW ARINING OU RELY WARNING The connectors of the power supply are adjusted to be assembled only in particular way If any problems with connecting occur turn round the connector and try again Step 7 Make sure that all of the bolts have been properly screwed inside the computer Short circuit may be caused by a falling screw Step 8 Put on and mount the computer case Step 9 Connect the plug of the power cord to a grounded socket equipped with a safety bolt e UNDER NO CIRCUMSTANCES SHOULD YOU OPEN THE COVER OF THE POWER SUPPLY e Damages to the seal on the device result in loss of right to warranty e Avoid exposing the device to the environment with increased humidity Ca i Pi E JF LO f T 1 reuse I 24 J AAVA J gt d If the power supply does not work carefully check If the power cord is properly plugged to the power supply and if the switch on the power supply2. or the strip is on e If all output connectors are properly connected to the devices inside the computer If unplugging the power supply and plugging it again helps to regain proper operation If the power supply does not work properly although above actions have been performed please contact with sales representative of the pro ducer to have the power supply fixed or replaced Further information on our web site www modecom eu WE EXPRESS THANKS AND CONGRATULATE YOU ON BEST CHOICE AVAILABLE THE BEST SOLUTION IN POWER SUPPLYING MODE COM
Download Pdf Manuals
Related Search