LG W3000H-BN
Contents
1. e Check and see if the power cord is connected properly to the power outlet Is the power cord of the display connected Is the power on and the Adjust the brightness and the contrast power indicator blue or green Is the power indicator the display is in power saving mode try moving amber the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Important Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend resolution Reasons for Recommending Optimal Resolution The aspect ratio is 16 10 If the input resolution is not 16 10 for instance 16 9 5 4 4 3 you might encounter problems such as blurred letters blurry screen cut off screen display or tilted screen a The setting method can differ by computer and O S Operation System and resolution mentioned above may not be supported by the video card performance In this case please ask to the computer or the video card manufacturer Troubleshooting Display image is incorrect The screen color is e Check if the signal cable is properly connected mono or abnormal and use a screwdriver to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel Settings The screen blinks2. Call your service technician for replacement Do not Open the Display There are no user serviceable components inside There are Dangerous High Voltages inside even when the power is OFF Contact your dealer if the display is not operating properly To Avoid Personal Injury Do not place the display on a sloping shelf unless properly secured a Use only a stand recommended by the manufacturer Do not drop an object on or apply impact to the product Do not throw any toys or objects on the product screen It can cause injury to human problem to product and damage the display To Prevent Fire or Hazards Always tum the display OFF if you leave the room for more than a short period of time Never leave the display ON when leaving the house Keep children from dropping or pushing objects into the display s cabinet openings Some intemal parts carry hazardous voltages a Do not add accessories that have not been designed for this display a When the display is to be left unattended for an extended period of time unplug it from the wall outlet a Inthe presence of thunder and lightning never touch the power cord and signal cable because it can be very dangerous It can cause electric shock Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord and do not place the display where the power cord is subject to damage Do not use this display near water such as nea
3. Connect to downstream connectors of desktop or laptop computers However the computer must support USB and have the USB port 3 The monitor s USB terminal supports USB 2 0 and High Speed cables a High Speed Full Speed Low Speed 480Mbps 1 5Mbps Power 2 5W 2 5W 2 5W Consumption Max each Port Max each Port Max each Port NOTE a To activate the USB hub function the display must be connected to a USB compliant PC OS or another hub with the USB cable enclosed a When connecting the USB cable check that the shape of the connector at the cable side matches the shape at the connecting side a Even if the display is in a power saving mode USB compliant devices will function when they are connected the USB ports both the upstream and downstream of the display Q Connecting the Display To arrange the cables Connect the power cord and the signal cable as shown in the figure and then fix them to the cable holders 1 and 2 1 Please insert the cable holder1 2 Please put the power cord and into a hole the signal cable in the cable holder 1 Cable Holder 1 3 Please put the power cord and the signal cable in the cable holder 2 While pressing the bottom of cable holder 2 with one hand pull the top of it with the other hand as shown in the picture Pull o Press Cable Holder 2 Control Panel Functions Front Panel Controls D Power Button Touching the button to turn the
4. power on and touch the button again to turn it off 2 Power Indicator This Indicator lights up blue when the display operates normally On Mode If the display is in Sleep Mode Energy Saving this indicator color changes to amber v 4 Buttons a You can adjust monitor brightness to be lighter A or darker w When adjusting brightness it will beep once when you reach the maximum or minimum level You can turn DFC function on or off by pressing two buttons at the same time for longer than three seconds When DFC is turned on the power indicator blue light flickers once after the beep When DFC is turned off the indicator flickers three times after the beep When DFC is on if the W A buttons are not pressed at the same time the brightness control function might be turned on What is DFC Digital Fine Contrast Function After analyzing input signals this product makes dark areas on the screen darker providing greater contrast ratio to viewers O Buttons You can turn on or off the alarm ringing when adjusting buttons while the power is on Touch any button to check if the sound is on or off If sound is heard it means the sound is on If not it means the sound is off 5 gt Buttons You can turn Power Indicator on or off by touching the button lightly while the power is on Troubleshooting Check the following before calling for service No image appears
5. Tilt 5 20 Swivel range 350 Height range 100 mm 3 94 inches AC 100 240V 50 60Hz 1 5A Operating Conditions Temperature 10 C to 35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type or PC outlet type USB Standard USB 2 0 Self Power Data Rate Max 480 Mbps Power Consumption Max 2 5W x 4 NOTE Information in this document is subject to change without notice Preset Modes Resolution Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 1280 x 800 49 310 60 2 2560 x 1600 98 713 60 Recommend Mode Indicator MODE LED Color On Mode Blue Sleep Mode Amber Off Mode Off Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device 1 After moving the product to face N downward make sure to place it on a soft cloth or a cushion to avoid surface damage 2 Remove the screw by using a screwdriver and pull the Stand part in the arrow direction Then the Head and Stand parts are separated 3 Install the Wall mount plate Wall mount plate Separate purchase This is stand type or wall mount type and is connectable with Wall mount plate Please refer to the installation guide for more details which is provided when Wall mount plate is purchase
6. User s Guide ee es W3000H Make sure to read the Important Precautions before using the product Keep the User s Guide CD in an accessible place for future reference See the label attached on the product and give the information to your dealer when you ask for service Important Precautions This unit has been engineered and manufactured to ensure your personal safety however improper use may result in potential electrical shock or fire hazards In order to allow the proper operation of all safeguards incorporated in this display observe the following basic rules for its installation use and servicing On Safety Use only the power cord supplied with the unit In case you use another power cord make sure that it is certified by the applicable national standards if not being provided by the supplier If the power cable is faulty in any way please contact the manufacturer or the nearest authorized repair service provider for a replacement The power supply cord is used as the main disconnection device Ensure that the socket outlet is easily accessible after installation Operate the display only from a power source indicated in the specifications of this manual or listed on the display If you are not sure what type of power supply you have in your home consult with your dealer Overloaded AC outlets and extension cords are dangerous So are frayed power cords and broken plugs They may result in a shock or fire hazard
7. d Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores Digitally yours suus ic
8. e Check if the screen is set to interlace mode and if yes change it to the recommend resolution Have you installed the display driver Have you installed the e Be sure to install the display driver from the display display driver driver CD or diskette that comes with your display Or you can also download the driver from our web site http www l ge com Do you see an e Make sure to check if the video card supports Unrecognized monitor Plug amp Play function Plug amp Play VESA DDC monitor found message Display Sync Input Video Input Resolution Plug amp Play Power Consumption Dimensions amp Weight Tilt Range Power Input Environmental Conditions 30 inches 75 6228cm Flat Panel Active matrix TFT LCD Anti Glare coating 30 inches viewable 0 2505 mm pixel pitch 98 71kHz Automatic 59 97 Hz Automatic Horizontal Freq Vertical Freq Input Form Digital HDCP Signal Input DVI D connector Digital Input Form Digital Max VESA 2560 x 1600 60 Hz Recommend VESA 2560 x 1600 60 Hz DDC 2B On Mode 130W Typ 140W USB Full load Sleep Mode lt 2W Off Mode lt 1W With Stand Without Stand Width 70 27 cm 27 67 inches 70 27 cm 27 67 inches Height 52 54 cm 20 69 inches Min 47 65 cm 18 76 inches 62 54 cm 24 62 inches Max Depth 27 02 cm 10 64 inches 8 30 cm 3 27 inches Net 12 3kg 27 12 lbs
9. n a Use a slightly damp not wet cloth Do not use an aerosol directly on the display screen because over spraying may cause electrical shock On Repacking Do not throw away the carton and packing materials They make an ideal container in which to transport the unit When shipping the unit to another location repack it in its original material On Disposal The fluorescent lamp used in this product contains a small amount of mercury a Do not dispose of this product with general household waste Disposal of this product must be carried out in accordance to the regulations of your local authority Connecting the Display a Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off Connecting the stand base or Removing the stand base 1 Place the monitor with its front facing downward on a cushion or soft cloth 2 Align the hooks on the Stand Body with the matching slots in the Stand Base 3 Insert the hooks into slots Hook Stand Body Stand Base Slot Warning a The tape and locking pin may only be removed from those monitors equipped witha standing base when the base is pulled up Otherwise you may be injured by the protruding sections of the stand Connecting the Display 4 Attach the monitor to the Stand Base by turning the screw to the right Screw Turn the screw by using the screw handle 5 Lift and turn the monito
10. off and then connect as follows 2 Connect DVI D signal cable When attached tighten the thumbscrews to secure the connection 3 Insert the power cord into the outlet 4 Touch the power button on the front of the monitor to turn on the monitor Power button Connecting the Display Connecting the USB Universal Serial Bus Cable USB Universal Serial Bus is an innovation in connecting your different desktop peripherals conveniently to your computer By using the USB you will be able to connect your mouse keyboard and other peripherals to your display instead of having to connect them to your computer This will give you greater flexibility in setting up your system USB allows you to connect a chain of up to 120 devices on a single USB port and you can hot plug attach them while the computer is running or unplug them while maintaining the Plug and the Plug auto detection and configuration This display has an integrated BUS powered USB hub allowing up to 2 other USB devices to be attached it 1 Connect the upstream port of the display to the downstream port of the USB compliant PC or another hub using the USB cable Computer must have a USB port 2 Connect the USB compliant peripherals to the downstream ports of the display USB downstream Port x 4 Connect the cables from USB compliant peripherals such as mouse memory stick or USB hard disk etc USB upstream Port x 1
11. r a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation If these openings are blocked built up heat can cause failures which may result in a fire hazard Therefore NEVER a Block the bottom ventilation slots by placing the display on a bed sofa rug etc Place the display in a builtin enclosure unless proper ventilation is provided Cover the openings with cloth or other material Place the display near or over a radiator or heat source Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate Do not rub or strike the Active M atrix LCD with anything hard as this may scratch mar or damage the Active M atrix LCD permanently Do not press the LCD screen with your finger for a long time as this may cause some afterimages Some dot defects may appear as Red Green or Blue spots on the screen However this will have no impact or effect on the display performance If possible use the recommended resolution to obtain the best image quality for your LCD display If used under any mode except the recommended resolution some scaled or processed images may appear on the screen However this is characteristic of the fixed resolution LCD panel On Cleaning Unplug the display before cleaning the face of the display scree
12. r to face towards the front after the connection is made to the female part of the cable you re attaching 6 Take the screw out by turning to the left to separate the monitor and Stand Base Important This illustration depicts the general model of connection Your monitor may differ from the items shown in the picture a Do not cany the product upside down holding only the stand base The product may fall and get damaged or injure your foot Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off Positioning your display 1 Adjust the position of the panel in various ways for maximum comfort a Tilt Range 5 20 a Swivel Range 350 350 a Height Range maximum 3 94 inch 100 0mm 1100 0mm Please be sure to remove the Locking pin to adjust the height Ergonomic You do not need to replace the Locking pin after it is removed to adjust its height a tis recommended that in order to maintain an ergonomic and comfortable viewing position the forward tilt angle of the monitor should not exceed 5 degrees When adjusting the angle of the screen do not put your finger s in between the head of the monitor and the stand body You can hurt your finger s Connecting the Display Using the Computer 1 First make sure that the power on the PC monitor and peripheral equipment are
Download Pdf Manuals
Related Search