Home

Samsung SyncMaster 911NT

1. Install drivers Install programs SyncMaster 711NT 911NT Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time set your computer to DPM If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Do not use a damaged or loose plug This may cause electric shock or fire Do not pull the plug out by the wire nor touch the plug with wet hands This may cause electric shock or fire Use only a properly grounded plug and receptacle An improper ground may cause electric shock or equipment damage Class l Equipment only Insert the power plug firmly so that it does not come loose A bad connection may cause fire Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage This may cause electric shock or fire Do not connect too many extension cords or plugs to one outlet This may cause fire Do not disconnect the power cord while using the monitor A surge may be caused by the separation and may damage the monitor Do not use the power cord when the connec
2. 370 0 x 404 3 x 200 mm 14 6 x 15 9 x 7 9 inch With Basic Stand 6 2 Kg 13 7 lbs VESA Mounting Interface 100 mm x 100 mm For use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residentia
3. be adjusted automatically when daylight saving time changes check the Automatically adjust clock for daylight saving changes check box Certificates With Certificates in Control Panel you can import view or remove a certificate A certificate can be imported from a file or smart card If your terminal does not provides a smart card reader the smart card item is displayed deactivated when you click Import If you click Remove with a certificate selected it will be deleted immediately without displaying any confirmation message If you want to save a deleted certificate again click Control Panel gt System and check the Reset the terminal to factory default settings checkbox Software Setup With Software Setup in Control Panel you can update modules Click Add and enter the IP address of the host PC that contains update files Your monitor will connect to the host PC download update files and update modules Update progressions are displayed on message boxes or on the status bar When the updates finishes click Close and restart your terminal When restarted open the Software Setup window and you can identify the name version and size of installed programs Network With Network in Control Panel you can view the list of adapters installed in the terminal To change the properties of an adapter click Properties after selecting it You can change IP address and host PC s name System The Terminal Information tab shows manu
4. Client Setup Wizard is executed when a thin client is installed for the first time data are not backed up after update or the Reset the terminal to factory default settings check box is checked on Control Panel gt System The Thin Client Setup Wizard helps configure basic settings The procedure for this is as follows When starting the system for the first time the Thin Client Setup Wizard is launched as shown below If Next is not clicked during the 15 second countdown after the first 30 seconds all settings are configured to the factory defaults and the setup wizard is exited When entering a terminal name and clicking on Network Properties the Network Manager dialog box is displayed This dialog box shows a list of adapters installed on your terminal You can change the properties of an adaptor such as the IP address and name server by clicking on Properties Click Next to proceed to the next step Configure the resolution the color settings and the screensaver Then click Next Select the shell interface to use with the terminal Click Next to proceed to the next step In the next window set the other terminal properties and click on Next For more information on terminal properties refer to Configuring the Client Monitor Environment If you want to change any of the settings you have configured click on Back or click on Finish to complete the Setup Wizard The thin client then completes the Setup Wizard and restarts
5. Control Panel you can configure your terminal s keyboard and mouse properties With the Keyboard tab you can configure how much time elapses before characters repeat and how quickly characters repeat when you hold down a key You can also specify whether to activate Num Lock Caps Lock and Scroll Lock keys at boot up With the Mouse tab you can change mouse button configuration to either Right handed or Left handed configuration and adjust the speed of your mouse pointer that the pointer responds to the movements of the mouse itself Upgrade Using the Upgrade item in the Control Panel you can upgrade your terminal s firmware By entering the URL of a host PC that provides the upgrade files and clicking on Update Now your terminal tries to connect to the host PC If the connection is successful it downloads and installs the relevant files You can cancel the upgrade while downloading files but you cannot cancel while the installation is in progress Forcefully shutting down the terminal during the installation can cause a serious problem When the firmware update finishes your terminal restarts and the Setup Wizard is displayed When selecting the Reset the system using the saved configuration file option and clicking Next all system settings are saved with the existing values and your terminal is restarted If you want to configure your terminal with fresh new settings unselect the Reset the system using the save configur
6. Normal Operation Power saving mode Power off EPA ENERGY 2000 Power Indicator Green Green Blinking Off Power Consumption Less than 50 W Less than 4 7 W Less than 2 7 W This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Preset Timing Modes Display Mode Horizontal Frequency kHz Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x
7. S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex Turn the power off when using a stationary pattern Use a Screen saver if possible
8. Set the Monitor to power off with the PC Display Properties Power Scheme Turn the power off for 4 Hours after 20 Hours in use Turn the power off for 2 Hour after 12 Hours in use Screen saver in one color or a moving image is recommended Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 Minutes Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey Ex Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 Minutes Ex Every 30 Minutes change the characters with movement Ex The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continu
9. a problem on the Internet path SNTP Client With SNTP Simple Network Time Protocol in Control Panel you can get a standard time from an SNTP host PC and synchronize your terminal s time with it Your terminal provides a list of several SNTP PCs by default You can also add remove a host from the SNTP host list To synchronize time select an SNTP host PC and click Synchronize Then the terminal will connect to the specified host PC get standard time and change your terminal s system time with it You can identify progressions on the message windows displayed If you want to synchronize your terminal s time to standard time whenever it boots up check the Synchronize at boot up check box VNC Host PC With VNC Host PC in Control Panel you can allow your thin client to be controlled remotely from a host that has a VNC client Open the VNC Host PC applet and determine whether to ask the password whenever a VNC client connects to your terminal If you check the No authentication used check box all hosts that have a VNC client program can connect to your terminal If you check the VNC password authentication check box and set a password only the host that provides the correct password can access to your terminal If you want an VNC host PC to executed at every boot up check the Start at boot up check box Display With Display in Control Panel you can specify color settings screen resolution and screensaver option For screen re
10. and games It is a new concept monitor You also can share the screen being displayed on your network monitor with other users by connecting a projector or other display device to its VGA OUT port You can use this functionality for video conferencing and a variety of shared tasks In addition because Windows XP is installed on your network monitor you can perform Internet searches and USB memory searches independently of your host PC Package Contents Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Without stand With Stand Manual Quick Setup Guide Warranty Card Not available in all locations User s Guide Monitor Driver Natural Color software MagicTune software Cable Power Cord Sold separately Keyboard USB Mouse USB D Sub Cable Your Monitor Front MENU button Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright button MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently six different modes are available Custom Text Internet Game Sport and Movie Each mode has its own pre configured brightness value You can easily select one of six settings by simply pressing MagicBright control button 1 Custom A
11. cable is finished fix the cables to the Cable Fix Ring Earphone jack Headphone connection terminal The Microphone connection terminal MIC Connect a microphone to the MIC terminal USB USB Connection Terminal Connect USB devices such as a mouse keyboard and external storage devices DSC MP3 external storage etc LAN LAN Connection Terminal Connect when using it as a monitor AUDIO IN Connect the audio cable for your monitor to the audio port on the back of your computer See Connecting Cables for further information regarding cable connections Connecting Cables Connecting Cables When used as a normal monitor Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the D Sub Cable to the VGA IN port on the back of your monitor VGA IN Using Macintosh Connect the monitor and the Macintosh computer using the computer connection cable If the monitor and the computer are connected you can turn them on and use them External Device Connection USB USB Connection Terminal Connect USB devices such as a mouse keyboard and external storage devices DSC MP3 external storage etc LAN LAN Connection Terminal Connect the LAN cable RS 232C Connection Terminal Connect a
12. directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Natural Color Natural Color One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor the Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D Color NCProSetup exe and then press the lt Enter gt key If the drive where the CD is inserted is not D enter the applicable drive Uninstalling the Natural C
13. from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition In this case check the computer for trouble Specifications General Model Name SyncMaster 711NT LCD Panel Size 17 inch 43 cm Display area 337 92 mm H x 270 336 mm V Pixel Pitch 0 264 mm H x 0 264 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 7 M Resolution Optimum resolution 1280 x 1024 60 Hz Maximum resolution 1280 x 1024 75 Hz Input Signal Terminated RGB Analog 0 7 Vp p 5 separate H V sync Composite H V sync TTL level V high 2 0 V V low 0 8 V Maximum Pixel Clock 135 MHz Power Consumption AC 100 240 V 10 50 60 Hz Signal Cable 15pin to 15pin D sub cable Detachable Dimensions W x H x D Weight 370 0 x 342 3 x 69 mm 14 6 x 13 5 x 2 7 inch Without Stand
14. host PC connection Fore more information see Editing Delete When clicking Delete in the Terminal Connection Manager window or clicking Delete in the displayed menu when right clicking a connection icon a Confirm Connection Deletion message box is displayed Startup When clicking on Startup Options in the Terminal Connection Manager window the Connection Startup Options dialog is displayed When selecting the Run the selected connection automatically when started checkbox the selected connection is run automatically after finishing a login Opening Closing a Connection To open a connection double click a connection in the Configure tab of the Terminal Connection Wizard or click the Connect button Alternatively you can double click a connection icon or you can right click it and select Open from the displayed menu To close a connection click the Close button in the Configure tab of the Terminal Connection Wizard or close the connection window The Close button is only activated if the selected connection is being connected Using shortcut keys when multiple connections are running Ctrl Alt End Displays either the Terminal Connection Wizard for Thin Client Shell or the Desktop for Desktop Shell Ctrl Alt or Allows you to switch to a different connection Configuring Client Monitor Environment The available items on Control Panel are different according to privileges of login account When logg
15. icon and the icons of the printers configured previously If there is no printer configured only the Add Printer icon is displayed If you double click the Add Printer icon or click the Open button the Printer Wizard is displayed Select a port to use with printer a printer manufacturer and printer If you set the added printer as the default printer printing is performed with this printer unless you specify a different printer If you double click an existing printer icon or click the Open button the Printer Properties window is displayed which allows you to change the properties for the printer Terminal Host PC Client License If you select an item in the list of saved licenses its content is displayed on the window below Click Delete to delete the selected license Click Save to save the selected license Volume and Sound With Volume and Sound in Control Panel you can open the Volume and Sound Properties window You can select volume level and configure activation and deactivation of sound according to various events through the check boxes provided Date Time With Date Time in Control Panel you can configure date and time of the terminal using the Date Time Properties window Select a month using the arrow buttons and click a date To change the AM PM hour minutes and seconds of the current time click in each item and then enter a value directly or click the arrows buttons In addition if you want your terminal s clock to
16. let your feet fall up from the floor Adjust the arm position so that it is below the heart Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Features What is a network monitor A network monitor can be used for the same purposes as a common monitor It also provides the functionalities of most computers such as an Internet connection creating documents editing images via a connection to the host PC over the LAN In addition it allows you to connect an external device DSC MP3 external storage media to the USB port and play music movies
17. turn the monitor off and unplug the power cord Then contact the Service Center The monitor may malfunction causing electric shock or fire Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time Failure to do so may cause electric shock or fire Do not try to move the monitor by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not move the monitor right or left by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet Bad ventilation may cause a breakdown or fire Do not place water containers chemical products or small metal objects on the monitor This may cause a malfunction electric shock or fire If a foreign substance enters the monitor unplug the power cord and contact the Service Center Keep the product away from combustible chemical sprays or inflammable substances This may cause an explosion or fire Never insert anything metallic into the monitor openings This may cause electric shock fire or injury Do not insert metal objects such as chopsticks wire and tools or inflammable objects such as paper or matches into the vent headphone port or AV ports or etc This may cause electric shock or fire If an alien substances or water enters the product
18. turn the product off unplug the power connector from the wall outlet and contact the Service Center When viewing a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time Adjust the resolution and frequency to the level appropriate for the model An inappropriate resolution may cause undesirable picture quality 17 inch 43 cm 19 inch 48 cm 1280 x 1024 Keep the volume at a comfortable level when using the headphones Excessively loud volume level may damage hearing Viewing the monitor continuously at a too close angle may result in damage to your eyesight To ease eye strain take at least a five minute break after every hour of using the monitor Do not install the product on an unstable uneven surface or a location prone to vibrations Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire When moving the monitor turn off and unplug the power cord Make sure that all cables including the antenna cable and cables connected to other devices are disconnected before moving the monitor Failure to disconnect cables may damage it and cause fire or electric shock Place the product out of c
19. 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center North America U S A 1 800 SAMSUNG 726 7864 http www samsung com us CANADA 1 800 SAMSUNG 726 7864 http www samsung com ca MEXICO 01 800 SAMSUNG 726 7864 http www samsung com mx Latin America ARGENTINE 0800 333 3733 http www samsung com ar BRAZIL 0800 124 421 4004 0000 http www samsung com br CHILE 800 SAMSUNG 726 7864 http www samsung com cl COLOMBIA 01 8000112112 http www samsung com co
20. 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz Specifications General Model Name SyncMaster 911NT LCD Panel Size 19 inch 48 cm Display area 376 32 mm H x 301 056 mm V Pixel Pitch 0 294 H x 0 294 V Synchronization Horizontal 30 81 kHz Vertical 56 75Hz Display Color 16 7 M Resolution Optimum resolution 1280x1024 60 Hz Maximum resolution 1280x1024 75 Hz Input Signal Terminated RGB Analog 0 7 Vp p 5 separate H V sync Composite H V sync TTL level V high 2 0 V V low 0 8 V Maximum Pixel Clock 135MHz Power Consumption AC 100 240 V 10 50 60 Hz Signal Cable 15pin to 15pin D sub cable Detachable Dimensions W
21. COSTA RICA 0 800 507 7267 http www samsung com latin ECUADOR 1 800 10 7267 http www samsung com latin EL SALVADOR 800 6225 http www samsung com latin GUATEMALA 1 800 299 0013 http www samsung com latin JAMAICA 1 800 234 7267 http www samsung com latin PANAMA 800 7267 http www samsung com latin PUERTO RICO 1 800 682 3180 http www samsung com latin REP DOMINICA 1 800 751 2676 http www samsung com latin TRINIDAD amp TOBAGO 1 800 SAMSUNG 726 7864 http www samsung com latin VENEZUELA 0 800 100 5303 http www samsung com latin Europe AUSTRIA 0800 SAMSUNG 726 7864 www samsung com at BELGIUM 02 201 2418 http www samsung com be CZECH REPUBLIC 844 000 844 http www samsung com cz DENMARK 70 70 19 70 http www samsung com dk FINLAND 030 6227 515 http www samsung com fi FRANCE 3260 SAMSUNG 726 7864 08 25 08 65 65 0 15 Min http www samsung com fr GERMANY 01805 SAMSUNG 726 7864 0 14 Min http www samsung de HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com hu ITALIA 800 SAMSUNG 726 7864 http www samsung com it LUXEMBURG 0035 0 2 261 03 710 http www samsung com be NETHERLANDS 0900 SAMSUNG 726 7864 0 10 Min http www samsung com nl NORWAY 815 56 480 http www samsung com no POLAND 0 801 801 881 022 607 93 33 http www samsung com pl PORTUGAL 80 8 200 128 http www samsung com pt REPUBLIC OF IRELA
22. Display icon Select the Settings tab and click the Advanced Properties button Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click Update Driver then click the Next button Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click the OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System Click Start Setting and then Control Panel Double click the Display icon Select the Settings tab and click the Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click the Next button Click the Have Disk button Specify A D driver then click the OK button Select Show all devices
23. ND 0818 717 100 http www samsung com ie SLOVAKIA 0800 SAMSUNG 726 7864 http www samsung com sk SPAIN 902 10 11 30 http www samsung com es SWEDEN 0771 400 200 http www samsung com se SWITZERLAND 0800 SAMSUNG 726 7864 http www samsung com ch U K 0870 SAMSUNG 726 7864 http www samsung com uk CIS ESTONIA 800 7267 http www samsung ee LATVIA 800 7267 http www samsung com lv LITHUANIA 8 800 77777 http www samsung lt KAZAHSTAN 8 10 800 500 55 500 http www samsung kz KYRGYZSTAN 00 800 500 55 500 RUSSIA 8 800 555 55 55 http www samsung ru UKRAINE 8 800 502 0000 http www samsung ua UZBEKISTAN 8 800 120 0 400 http www samsung uz Asia Pacific AUSTRALIA 1300 362 603 http www samsung com au CHINA 800 810 5858 010 6475 1880 http www samsung com cn HONG KONG 3698 4698 http www samsung com hk INDIA 3030 8282 1800 110011 http www samsung com in INDONESIA 0800 112 8888 http www samsung com id JAPAN 0120 327 527 http www samsung com jp MALAYSIA 1800 88 9999 http www samsung com my NEW ZEALAND 0800SAMSUNG 726 7864 http www samsung com nz PHILIPPINES 1800 10 SAMSUNG 726 7864 http www samsung com ph SINGAPORE 1800 SAMSUNG 726 7864 http www samsung com sg THAILAND 1800 29 3232 02 689 3232 http www samsung com th TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn M
24. RS 232C cable to this terminal D sub 15 pin port VGA OUT Use it by connecting it to another monitor The picture of the main monitor is displayed on the connected monitor Using the Stand Tilt angle You can tilt the monitor screen forward to adjust the angle to a particular angle Swivel stand You can easily adjust the position of the monitor screen from right to left using the rotating stand Rubber stubs are attached at the bottom of the monitor to help fix it to the installation location Using Other Stands Attaching a Base This monitor accepts a 100 mm x 100 mm VESA compliant mounting interface pad Monitor Mounting interface pad Sold separately Turn off your monitor and unplug its power cord Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen Remove four screws and then remove the stand from the LCD monitor Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm type base wall mount hanger or other base Do not use screws longer than the standard dimension as they may damage the inside of the Monitor For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as thi
25. Zone Saturation This function is to adjust the saturation of the MagicZone Brightness This function is to adjust the brightness of the MagicZone Sharpness This function is to adjust the sharpness of the MagicZone H Position This function is to move the MagicZone horizontally V Position This function is to move the MagicZone vertically H Size This function is to adjust the horizontal size of the MagicZone V Size This function is to adjust the vertical size of the MagicZone Hue Saturation Brightness Sharpness H Position V Position H Size V Size Color Tone The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Custom Not available in MagicColor mode of Full and Intelligent MENU MENU Color Control Adjusts individual Red Green Blue color balance Red Green Blue Not available in MagicColor mode of Full and Intelligent MENU MENU Gamma Gamma correction changes the luminance of the colors with intermediate luminance Mode 1 Mode 2 Mode 3 MENU MENU Image Menu Description Play Stop Coarse Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu MENU MENU Available
26. a software utility installed on your computer to set up this feature State Normal Operation Power saving mode Power off EPA ENERGY 2000 Power Indicator Green Green Blinking Off Power Consumption Less than 50 W Less than 4 7 W Less than 2 7 W This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality As an ENERGY STAR Partner SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Preset Timing Modes Display Mode Horizontal Frequency kHz Vertical Frequency Hz Pixel Clock MHz Sync Polarity H V IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72
27. al use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment Client Item Specifications LAN 100 Mbps USB 2 0 x 4Ports Internet Browser MS Internet Explorer Photo JPEG BMP Photo Audio Video MPEG1 WMV MP3 WAV WMA JPEG BMP Server Requirement Connect Client No CPU RAM Ethernet OS Minimum SPEC Just can load Server Program P3 400 MHz 64 Mbyte 100 Mbps windows 2003 Server Recommend SPEC 1 P4 1 0 GHz 256 Mbyte 100 Mbps windows 2003 Server 2 4 P4 2 4 GHz 512 Mbyte 5 7 P4 3 0 GHz 1 Gbyte 8 10 P4 3 2 GHz 2 Gbyte The content presented above is the result of testing a specific server The information may change as the server may be different For some products the OS may not be supported When purchasing a product make sure to check whether or not the OS is supported PowerSaver PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use
28. and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System Click Start Settings Control Panel and then double click Display icon In the Display Registration Information window click the Settings tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click the Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency
29. ation file option and click on Next The next steps are the same as the steps when setting up your terminal for the first time Desktop The thin client provides a Desktop Shell and a Thin Client Shell When selecting a shell and restarting your terminal it boots up into the selected shell Security The Security applet provides various security related functionalities The window as shown below is open when you double click the Security icon All user accounts are listed with sorted Each item contains name group description and status info Default Auto Start If you click Add or Modify the window as shown below is displayed 1 You can enter basic information using the Terminal Local Account group The user name is the required item to create a new account You cannot use symbolic characters and you can use up to 20 characters If you want to set a password for an account set a password within 20 characters long and make sure to confirm your password 2 You can allocate connections and configure options using the Connection Manager group If you click Privileges on the Security dialog the window as shown below is displayed You can specify Control Panel items a limited user account can use When logged in as a limited user account only the specified items are displayed in Control Panel To allocate a connection to your terminal select the connection you want to use from the available connections list and click t
30. ature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check Turn off both your computer and the monitor Unplug the video cable from the back of the computer Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below This box appears during normal operation if the video cable becomes disconnected or damaged Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Environment The location and the position of the monitor may influence the quality and other features of the monitor If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips A monitor recreates visual signals received
31. ayed in sequence Microsoft Windows XP Operating System Insert the CD into the CD ROM drive Click Start Control Panel then click the Appearance and Themes icon Click Display icon and choose the Settings tab then click Advanced Click the Properties button on the Monitor tab and select Driver tab Click Update Driver and select Install from a list or then click the Next button Select Don t search I will then click Next and then click Have disk Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button If you can see following Message window then click the Continue Anyway button Then click the OK button This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click the OK button continually Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps How to install Choose the OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click the OK button Click Start Setting and then Control Panel Double click the
32. by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1280 x 1024 this means the screen is composed of 1280 horizontal dots horizontal resolution and 1024 vertical lines vertical resolution For Better Display Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD Resolution 1280 x 1024 Vertical frequency refresh rate 60 Hz TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 When cleaning the monitor and the panel outside please apply the recommended small amou
33. cally children may trip over it TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES Otherwise this may cause fire Keep any heating devices away from the power cable A melted coating may cause electric shock or fire Do not install the product in places with poor ventilation for instance a bookshelf closet etc Any increase in the internal temperature may cause fire Put down the monitor carefully Failing to do so may damage the monitor Do not place the monitor face down This may damage the TFT LCD surface The installation of the bracket must be done by a qualified professional Installing the bracket by unqualified personnel may result in injury Always use the mounting device specified in the owner s manual When installing the product make sure to keep it away from the wall more than 10 cm 4 inches for ventilation purposes Poor ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance Keep the plastic packaging bag out of children s reach The plastic packaging bag may cause suffocation if children play with it Cleaning and Using When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric Do not spray water or detergent directly onto the monitor This may cause damage electric shock or
34. ed If you check the Auto Login check box and select an account you are logged in automatically with the specified account unless you click Cancel and login to the server with a different account at a login time If the Set screensaver password is checked a window to enter the password is prompted to authenticate the user when the screensaver finishes If you don t want the user to write on USB memory when connected to RDP or ICA check the Write protect on USB memory check box The Logon window is displayed when a user turns on or restarts a client terminal or another user is logged out If the Auto Login option is selected the Auto Login window is displayed Unless you click Cancel within five 5 seconds and login to the host PC with a different account you will be logged on to the host PC automatically with the specified account With the Shut down button you can shut down or restart your terminal or log out from the host PC you are logged on to The Log Out item is only displayed if the User login function option is selected However for Windows 2000 Server OS only low color 256 colors is supported Notice to Users 1 Use a PC with Windows 2000 Server 2003 Server OS as a host PC Two users cannot connect to Windows XP Home Professional PC at the same time 2 When a USB mouse is not recognized separate and reconnect the USB mouse The mouse will be recognized 3 Separating peripheral devices while bootin
35. ed on with Administrator privileges all items are displayed and available If you logged on as a limited user only the items that the administrator permitted are displayed This can be configured with Control Panel gt Security gt Privileges If you click on an item on Control Panel a brief description of the selected item is displayed on the bottom left of the window To open a Control Panel item double click on it or press the Alt O keys after selecting it Accessing Control Panel with the Terminal Connection Manager Press the SOURCE button on the bottom of the front of the monitor to switch to Client mode To open Control Panel click Configure or press F2 key on the Terminal Connection Manager Continue to configure settings when the dialog below is displayed Internet Options With Internet Options in Control Panel you can change the settings for Internet Explorer using the Internet Options applet on Control Panel You can specify the home page which is displayed when the browser starts and a web page for searching which is displayed when the Search button is pressed You can also security level and whether to block popup windows or not You can access this applet by clicking Tool menu gt Internet Options on Internet Explorer Printer A thin client performs printing works of a RDP ICA host PC at a local printer You can configure and modify local printers using the Printer applet The Printer window shows the Add Printer
36. er or your dealer Can you see Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz on the screen You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds SXGA or 75 Hz a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message appears for one minute and then disappears Please change to the recommended mode during this one minute period The message is displayed again if the system is rebooted There is no image The monitor is in PowerSaver mode on the screen Is the power indicator on the monitor blinking at 1 second intervals Press a key on the keyboard to activate the monitor and restore the image on the screen If there is still no image press the SOURCE button Then press any key on the keyboard again to activate the monitor and restore the image on the screen I cannot see the On Screen Display Have you locked the On Screen Display OSD Menu to prevent changes Unlock the OSD by pressing the button for at least 5 seconds The screen shows strange colors or just black and white Is the screen displaying only one color as if looking at the sc
37. facturer product information OS version and memory information etc You can also reset the terminal to factory defaults Networking Tools With Networking Tools in Control Panel you can view IP properties and check your network s state using Ping and Trace Route The IP Properties tab shows the IP address subnet mask gateway DNS host PC and WINS host PC for the selected adapter If your terminal gets its IP address from DHCP server the Refresh and Release buttons are activated Click Release to release the currently allocated IP address and click Refresh to update IP address With the Ping tab you can enter an host address IP address or DNS name and click Ping to execute the ping command Ping command ping sends ICMP echo request to the host and wait response If the host is working it sends a response In addition ping measures and shows the time required from going to the host to returning to the client Ping is used as a tool to detect whether the network has a problem or not With the Trace Route tab you can execute tracert command by entering a host address IP address or DNS name and clicking Trace tracert traces the path that a packet travels from the thin client to the host and shows the information on each router a packet passes In addition it also lets you know the time required from going to each router to returning to the client using ICMP echo request reply By analyzing this information you can find a network that has
38. fe Mode remove the Display adaptor at the Control Panel System Device Administrator and then reboot the computer to reinstall the adaptor video driver If problems repeatedly occur contact an authorized service center Q amp A Question Answer How can I change the frequency Frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I adjust the resolution Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution at the Control Panel Display Settings Contact the video card manufacturer for details How can I set the Power Saving function Windows XP Set the resolution at the Control Panel Appearance and Themes Display Screen Saver Set the function at BIOS SETUP of the computer Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function at BIOS SETUP of the computer Refer to Windows Computer Manual How can I clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any remains of the detergent nor scratch the case Do not allow any water to go inside the monitor Self Test Self Test Fe
39. fire Use the recommended detergent with a smooth cloth If the connector between the plug and the pin is dusty or dirty clean it properly using a dry cloth A dirty connector may cause electric shock or fire Make sure to unplug the power cord before cleaning the product Otherwise this may cause electric shock or fire Unplug the power cord from the power outlet and wipe the product using a soft dry cloth Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lubricant or detergent Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year Keep the product s interior clean Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire Others Do not remove the cover or back This may cause electric shock or fire Refer to a qualified servicing company If your monitor does not operate normally in particular if there is any unusual sound or smell coming from the monitor unplug it immediately and contact an authorized dealer or the Service Center This may cause electric shock or fire Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle This may cause a malfunction electric shock or fire In particular avoid operating the monitor near water or outdoors where the monitor If the monitor is dropped or the casing is damaged
40. g up the Client may cause an error Before separating peripheral devices make sure the power is off 4 The automatic rotation function is only available when the monitor is directly connected to a PC Client monitor does not support the automatic rotation function 5 Restrictions of the Windows 2000 Server Operating System Only Low Color 256 colors screen quality is supported You cannot find the USB device connected to the monitor from the host PC Monitor Driver When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China Installing the Monitor Driver Automatic Insert the CD into the CD ROM drive Click Windows Choose your monitor model in the model list then click the OK button If you can see following message window then click the Continue Anyway button Then click the OK button Microsoft Windows XP 2000 Operating System This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified drive
41. he gt button or double click the connection Use the gt gt button to allocate all available connections to your terminal Use the Remove and Remove All buttons to cancel an allocation The Auto Start button changes the state of the selected allocated connection to Auto Start or Default toggling If you set an allocated connection to Auto Start the Hide Connection Manager check box is activated If you check this check box when the Thin Client Shell logs on to the server with the specified account the connection whose state you set to Auto Start is executed instead the Connection Manager being displayed If you want to reconnect automatically when a connection fails or finishes check the Auto Restart check box However this check box cannot be checked with the Hide Connection Manager check box at the same time Check the Lock terminal properties check box if you want to open terminal properties only if password authentication is passed successfully Click OK to add or modify the account If you want to delete an account use the Remove button on the Security dialog If you want to apply the login functionality in order to allow access for allowed users only check the Use login function check box If you do not check this check box the selected account is the same with the administrator account If you check the Use login function check box the Auto Login and the Set screensaver password check boxes are activat
42. hildren s reach as they could damage by hanging onto it A falling product may cause injury to the person or even fatality When not using the product for an extended period of time keep the product unplugged Otherwise this may cause heat emission from the accumulated dirt or degraded insulation causing electric shock or fire Do not place your children s favorite toys or any other objects of interest on the product Children may try to climb on the product to retrieve an object The product could fall causing injury or even fatality When lifting up or moving the monitor do not lift the monitor upside down while holding only the stand This may cause your monitor to fall and become damaged or cause personal injury Proper Seating Posture During Monitor Use Try to maintain a good posture when using the monitor Keep your back straight Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you Tilt the monitor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits Keep your arms level with the back of your hands Keep the angle of the elbow perpendicular Keep the angle of the knees at more than 90 degree Do not
43. hut down and this may cause damage to your operating sysetm Therefore ensure that the EWF function is enabled 1 Turn the power off by holding down the Power button after switching to Monitor mode from Client mode 2 Turn the power off by holding down the Power button for more than five 5 seconds in Client mode When unable to boot up your computer because of a Windows crash please contact your Administrator Power indicator This light glows green during normal operation and blinks green once as the monitor saves your adjustments See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Rear The configuration at the back of the monitor may vary from product to product POWER IN port Connect the power cord for your monitor to the power port on the back of the monitor VGA IN port Connect the signal cable to the 15 pin D sub port on the back of your monitor RS 232C Connection Terminal Connect a RS 232C cable to this terminal VGA OUT port Connect a monitor to another monitor through a D Sub cable Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately For using a locking device contact where you purchase it Cable Fix Ring When connecting the
44. iddle East amp Africa SOUTH AFRICA 0860 SAMSUNG 726 7864 http www samsung com za TURKEY 444 77 11 http www samsung com tr U A E 800 SAMSUNG 726 7864 8000 4726 http www samsung com mea Terms Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user
45. ile the AUTO PATTERN is on Available in analog Mode Only If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock In case of pushing AUTO button after locking OSD In case of pushing MENU button after locking OSD Menu Description OSD Lock amp Unlock This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the menu button for more than five 5 seconds to activate the OSD adjustment lock function Unlock Hold down the menu button for more than five 5 seconds to deactivate the OSD adjustment lock function Though the OSD adjustment lock function is activated you can still adjust the brightness and contrast and adjust MagicBright using the Direct button MagicBright Menu Description MagicBright Push the MagicBright button to circle through available preconfigured modes Six different modes Custom Text Internet Game Sport Movie Volume Menu Description Volume When OSD is not on the screen push the button to adjust volume SOURCE Menu Description SOURCE Selects the Video signal while the OSD is off Analog Client OSD Function Picture Brightness Contrast Color MagicColor Color T
46. in analog Mode Only Fine Removes noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequency clock speed MENU MENU Available in analog Mode Only Sharpness Changes the clearance of image Not available in MagicColor mode of Full and Intelligent MENU MENU H Position Changes the horizontal position of the monitor s entire display MENU MENU Available in analog Mode Only V Position Changes the vertical position of the monitor s entire display MENU MENU Available in analog Mode Only OSD Menu Description Play Stop Language You can choose one of the nine languages MENU MENU The language chosen affects only the language of the OSD It has no effect on any software running on the computer H Position You can change the horizontal position where the OSD menu appears on your monitor MENU MENU V Position You can change the vertical position where the OSD menu appears on your monitor MENU MENU Transparency Change the transparency of the background of the OSD MENU MENU Display Time The menu will be automatically turned off if no adjustments are made for a certain time pe
47. isplay Configures the screen resolution Make sure to set a value higher than the minimum value that the computer you want to connect to supports Local Resources Remote Computer Sound You can configure the sound so that you can easily identity the connection state Local Device Select one of the external devices which are being connected to the host PC computer you want to connect to Programs Specify what is displayed on the first screen when connected You can select the Desktop or an application program Experience You can configure the communications speed between your terminal and the host You can also share a set of configurations for the host PC with other terminals You can configure your terminal settings so that it tries to reconnect automatically whenever it is disconnected Terminal Connection Manager Connections Tab Connect Selects the host PC to connect to or opens an Internet window Shutdown Icons Menus on the Desktop Desktop Shell Start gt Shut down You can shut down or restart the system Setup Icons Menus on the Desktop Desktop Shell Start gt Settings gt Control Panel You can configure the settings for the computers contained in the product For more information see Configuring the Client Monitor Environment Configure Tab Add You can add a new host PC to your network For more information see How to Connect a Host PC Edit You can change the settings for a
48. itted over the LAN Check your LAN connection status I have connected a digital device such as a digital camera camcorder or USB memory to the USB port but they do not work This model supports USB devices that support removable disk functions without an additional driver installation Check if the device you want to connect to is a device that supports the removable disk function without an additional driver installation The file list does not appear 1 Check the files on the card If only abnormal files e g 0KByte broken JPEG exist the files do not appear on the screen 2 The time required to display is determined by the size of the file Wait a moment 3 Check if the format of the file is supported by the Client Monitor If the extension of the file has been changed the file will not be played Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly connected to the computer Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer If you installed a new video card or if you assembled the PC check if the installed the adaptor video driver and the monitor driver Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution If you have problems in installing the adaptor video driver boot the computer in Sa
49. l areas Class B equipment emits less electromagnetic waves than Class A equipment Client Item Specifications LAN 100 Mbps USB 2 0 x 4Ports Internet Browser MS Internet Explorer Photo JPEG BMP Photo Audio Video MPEG1 WMV MP3 WAV WMA JPEG BMP Server Requirement Connect Client No CPU RAM Ethernet OS Minimum SPEC Just can load Server Program P3 400 MHz 64 Mbyte 100 Mbps windows 2003 Server Recommend SPEC 1 P4 1 0 GHz 256 Mbyte 100 Mbps windows 2003 Server 2 4 P4 2 4 GHz 512 Mbyte 5 7 P4 3 0 GHz 1 Gbyte 8 10 P4 3 2 GHz 2 Gbyte The content presented above is the result of testing a specific server The information may change as the server may be different For some products the OS may not be supported When purchasing a product make sure to check whether or not the OS is supported PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use a software utility installed on your computer to set up this feature State
50. lthough the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or works involving heavy text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD gt gt Click here to see an animation clip Volume button When OSD is not on the screen push the button to adjust volume Adjust buttons Adjust items in the menu Enter button SOURCE button Activates a highlighted menu item Push the SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode Analog or Client input signal gt gt Click here to see an animation clip AUTO button Use this button for auto adjustment gt gt Click here to see an animation clip Power button Use this button for turn the monitor on and off Be careful as pressing the Power button in client mode will shut down Windows XPe Be careful that if you force shut down Windows it may cause damage In these cases your monitor will be forcefully s
51. m Hardware Device Manager Monitors After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune MagicTune doesn t work properly Have you changed your PC or video graphic card Download the latest program The program can be downloaded http www samsung com monitor magictune Did you install the program Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program Visit the MagicTune website and download the installation software for MagicTune MAC Check the following items if there is trouble with the monitor Symptom Solutions The screen does not appear when I switch to the Client Mode When booting up it takes about 30 seconds for the networking functions to be activated and no screen is displayed for about 3 to 4 seconds Wait 30 seconds after the power is turned on and try to switch modes again If the operating system does not boot up due to damage to Windows or a blue scree
52. n is displayed download the Windows XPe OS from this site and recover your operating system with it http www syncsight com The client screen appears but I cannot connect to the server 1 Check if the Hub port LED to which the LAN cable is connected blinks If not that indicates that the LAN connection is disconnected In this case connect using another LAN cable 2 Check if the settings of the Settings Network tab are properly set up The default setting is DHCP If your network uses a static IP address select Use the following IP address and then enter the appropriate IP address information 3 Check if the User Name and Password set in the Remote Desktop tab of Settings are the same as those of the host PC If not match the User Name and Password of the Remote Desktop with those of the host PC I cannot access the Internet in the Client screen 1 Check if the Hub port LED to which the LAN cable is connected blinks If not that indicates that the LAN connection is disconnected In this case connect using another LAN cable 2 Check if the settings of the Network tab of Settings have been properly set up The default setting is DHCP If your network uses a static IP address select Use the following IP address and then enter the appropriate IP address information The contents video voice on the server do not play smoothly on the Client Monitor This is because the data is transm
53. nt of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you can have a stain on it If you are not satisfied with the picture quality you can get better quality of picture by performing the auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the FINE COARSE adjustment function When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time Authority Information in this document is subject to change without notice 2007 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U
54. olor Software Program Select Settings Control Panel from the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button MagicTune Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MagicTune installation file 3 Select installation Language Click Next 4 When the Installation Shield Wizard window appears click Next 5 Select I agree to the terms of the license agreement to accept the terms of use 6 Choose a folder to install the MagicTune program 7 Click Install 8 The Installation Status window appears 9 Click Finish 10 When the installation is complete the MagicTune executable icon appears on your desktop Double click the icon to start the program MagicTune execution icon may not appear depending on specification of computer system or monitor If that happens press F5 Key Installation Problems MagicTune The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment System Requirements OS Windows 2000 Windows XP Home Edition Windows XP Professional Windows Vista It is recommended using MagicTune in Windows 2000 or later Hardware 32MB Memory above 60MB Hard disk space above For more information visit the MagicTune website Uninstall The MagicTune p
55. one Color Control Gamma Image Coarse Fine Sharpness H Position V Position OSD Language H Position V Position Transparency Display Time Setup Image Reset Color Reset Information Picture Menu Description Play Stop Brightness You can use the on screen menus to change the brightness according to personal preference MENU MENU Contrast You can use the on screen menus to change the contrast according to personal preference Not available in MagicColor mode of Full and Intelligent MENU MENU Color Menu Description Play Stop MagicColor MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality Off Returns to the original mode Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left Full Displays not only vivid natural color but also more realistic natural skin color with clearness Intelligent Displays vivid natural color with clearness MagicZone The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness sharpness saturation hue of a certain area on the screen Especially MagicZone is appropriate to using the moving picture MagicZone Hue This function is to adjust the hue of the Magic
56. ously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 Hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II
57. r will be posted on Samsung Monitor homepage http www samsung com Monitor driver installation is completed Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux Microsoft Windows Vista Operating System Insert your Manual CD into your CD ROM drive Click Start and Control Panel Then double click on Appearance and Personalization Click Personalization and then Display Settings Click Advanced Settings Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click Update Driver in the Driver tab Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Select the model that matches your monitor from the list of monitor models on the screen and click Next Click Close Close OK OK on the following screens displ
58. reen through a cellophane paper Check the signal cable connection Make sure the video card is fully inserted in it s slot Have the screen colors become strange after running a program or due to a crash between applications Reboot the computer Has the video card been set properly Set the video card by referring to the video card manual The screen suddenly has become unbalanced Have you changed the video card or the driver Adjust screen image position and size using the OSD Have you adjusted the resolution or frequency to the monitor Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD The screen is out of focus or OSD cannot be adjusted Have you adjusted the resolution or frequency on the monitor Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes LED is blinking but no images on the screen Is the frequency properly adjusted when checking the Display Timing on the menu Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product There are only 16 colors shown on the screen The screen colors have changed after changing the video card Have the Windows colors been se
59. riod You can set the amount of time the menu will wait before it is turned off 5 Sec 10 Sec 20 Sec 200 Sec MENU MENU Setup Menu Description Play Stop Image Reset Image parameters are replaced with the factory default values MENU MENU Color Reset Color parameters are replaced with the factory default values MENU MENU Information Menu Description Information Shows a video source display mode on the OSD screen MENU Check List Before calling for service check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Symptom Check List Solutions No images on the screen I cannot turn on the monitor Is the power cord connected properly Check the power cord connection and supply Can you see Check Signal Cable on the screen Check the signal cable connection If the power is on reboot the computer to see the initial screen the login screen which can be seen If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes If the initial screen the login screen does not appear contact the Service Cent
60. rogram can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune 1 Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 In the Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program 5 Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades Control Buttons Opens the OSD menu Also use to exit the OSD menu or return to the previous menu These buttons allow you to adjust items in the menu Press this button to Activates a highlighted menu item AUTO When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Direct Functions AUTO Menu Description AUTO When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center The values of fine coarse and position are adjusted automatically To make the automatic adjustment function sharper execute the AUTO function wh
61. s may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified Please use Wall Mount according to the International standards Connecting a Client Monitor Host PC Hub LAN Cable Monitor Connect the power cord to the power terminal at the back of the monitor Connect the mouse and the keyboard to the USB ports Connect the LAN port on the back of the monitor and the hub Connect the hub and the LAN port of the host PC The host PC must have an IP address After connecting the LAN and setting the IP address you can view the host PC screen on the monitor Use the VGA IN port to directly connect the monitor to a PC Connect to the VGA OUT port to display the same picture on another monitor such as the projector For presentation purposes Use the USB port to connect an external storage device DSC MP3 external storage etc Setup Client Monitor The Thin
62. solution and color settings only the values applicable to your terminal are displayed For screensaver option you can select one of three options None Floating image Turn off monitor If you select None no screensaver operates If you select either Floating image or Turn off monitor a screensaver starts automatically if there is no user input for the specified waiting time You need to restart your terminal to apply Display setting changes ICA Client Setup If you double click ICA Client Setup the Global ICA Client Settings window is displayed With the Keyboard Shortcuts tab you can configure shortcut keys Some shortcut keys are used to control operations of the ICA Connection window and the remaining are normal Windows shortcuts If you want to change the default key assignments select a key from the combo box With the Preferences tab you can configure update functionality settings These settings are used when you update your terminal modules manually using a Terminal Manger program instead using Auto Update With the Server Location tab you can view a list of IPC host PCs that exists on your network The Firewall Settings tab is used to configure a SOCKS Socket Secure firewall SOCKS is a protocol that configures the proxy host PC which exists between thin client and host PC The proxy host PC is used as a channel that mediates communication between thin client and host PC Keyboard amp Mouse With Keyboard amp Mouse in
63. t properly Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution at the Control Panel Display Settings Has the video card been set properly Set the video card by referring to the video card manual There is a message that reads Unrecognized Have you installed the monitor driver Install the monitor driver according to the Driver Installation Instructions See the video card Install the monitor driver according to the Driver monitor Plug amp Play VESA DDC monitor found manual to see if the Plug amp Play VESA DDC function can be supported Installation Instructions Problems related to Audio No sound Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to Connecting the Monitor Check the volume level Sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program Check when MagicTune does not function properly MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel Performance and Maintenance Syste
64. the terminal automatically Connecting to the Host PC You can add edit or remove connections using the Terminal Connection Manager Thin Client Shell or the icon menus on the Desktop However this function requires administrator privileges If you logged on as a limited user the menus for configuring connections are hidden or deactivated If you click the Add button or the Add New Connection menu on the Terminal Connection Manager the New Connection window is displayed If you select a connection to create and click OK the Connection Wizard is executed Citrix ICA Client ICA When using a terminal server on a variety of operating systems such as Unix and Linux as well as Windows Microsoft Remote Desktop Client RDP When using a terminal server on the Windows operating system Citrix ICA Client Select a server from the server list or enter server information IP address DNS name directly To update the server list click Refresh Click on Server Location and configure the server properties in the displayed window Click Next to proceed to the next step Enter the name that will be displayed in the list on the Terminal Connection Manager or as a connection icon on the Desktop and click Next When you connect to the server the server s Desktop is displayed on the monitor by default If you want to start an application when connected enter its name and working directory Click Next to proceed to the next step If you
65. tor or plug is dusty If the connector or plug of the power cord is dusty clean it with a dry cloth Using the power cord with a dusty plug or connector may cause electric shock or fire To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable This may cause electric shock or fire Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances andwhere it will be operated for 24 hours continuously such as an airport train station or etc Failure to do so may cause serious damage to your monitor Place your monitor in a location with low humidity and a minimum of dust Failure to do so may cause electric shock or fire inside the monitor Do not drop the monitor when moving it This may cause damage to the product or the person carrying it Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf Dropping the product may cause damage to the product or the person carrying it Do not place the product on an unstable or small surface area Place the product on an even and stable surface as the product may fall and cause harm to someone walking by specifically children Do not place the product on the floor Take care as someone specifi
66. want to log on the server automatically when connected enter user name password and domain If you wan to use a smart card for login check the Allow Smart Card logon checkbox Click Next to proceed to the next step Select window colors Selecting a small number of colors speeds up overall processing on the network Click Next to proceed to the next step Select compression encryption and sound options for ICA connection Enter the information required to pass firewalls or security policies Microsoft Remote Desktop Clinet Enter a name for the connection and host PC s name The name you enter will be displayed in the list on the Terminal Connection Manager or as a connection icon on the Desktop You can enter an IP address or DNS name for host PC s name Click Next to proceed to the next step If you want to log on the host PC automatically when connected check the Auto Login check box and enter user name password and domain Click Next to proceed to the next step When connected to the host PC Window NT Desktop is displayed on the monitor by default If you want to start an application when connected enter its path and file name Click Next to proceed to the final step Save the new connection and finish the WTS Connection Wizard If you want to change settings select a new setting and click Edit General Displays information such as the connection name and the host PC name when auto login is selected D
67. x H x D Weight 416 6 X 375 2 X 74 7 mm 16 4 x 14 8 x 2 9 inch Without Stand 416 6 X 420 9 X 200 0 mm 16 4 x 16 6 x 7 9 inch With Stand 6 8 Kg 15 0 lbs VESA Mounting Interface 100 mm x 100 mm For use with Specialty Arm Mounting hardware Environmental considerations Operating Operating Temperature 10 40 Humidity 10 80 non condensing Storage Storage Temperature 20 45 Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residenti

Samsung SyncMaster 911NT

Contents

Download Pdf Manuals

Related Search

Related Contents