Home

Philips 50PFP5332D 50" plasma integrated digital widescreen flat TV

Contents

1. TV menu Installation Channels Installation update Installation updat Channel tuning Available channels Cable analog NTSC or digital QAM max from 1 to 125 Antenna analog NTSC or digital ATSC max from 2 to 69 If a tuned channel is not yet in the master channel map the TV will attempt to tune the channel and it will be added to the map If the channel is not acquired a message will appear that the channel is not available When you tune an audio only digital subchannel a display appears with the message Audio only Note Subchannel selections The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit remote control direct acces channel number entry The number of channels shown at installation includes paid channels but you may not be able to see all of them unless you sign up with cable TV operators Important After the installation of the TV channels has been done always make a selection in the Installation menu between Antenna or Cable whether you want to watch Antenna IV channels or Cable TV channels If you make use of a signal splitter do not forget to put the switch in the corresponding position Installation update only with Digital TV broadcasting This allows you to automatically tune to and update all available digital channels Notes this will not reinst
2. AE Video Camera Games Console to TV FR Cam ra vid o Console de jeux vers t l viseur ES De la camara de video Consola de juegos al TV TV Side J Tableau de connexions du t l viseur Panel de enchufes del TV PREV CH WT AUDIO VIDEO RIGHT LEFT S VIDEO Composite Audio video TE Video Camera Jack Panel Audio Vid o composite Panneau de connexions E IHH E de la cam ra vid o Audio Video compuesto Ge Panel de enchufes de la camara de video Details refer to page 23 D tails consultez le page 23 Para detalles consulte la pag 23 Remote Control T l commande Control remoto Source Button Bouton Source Boton Source For First time Installation refer to page 5 For USB headphone and Digital Surround receiver details refer to page 23 Pour installation pour la premi re fois cosultez le page 5 Poru des d tails d USB Audifono consultez le page 23 Para Instalaci n por primera vez vea pag 5 Para detalles de USB Audifono consulte la pag 23 Contents A Guide to Digital TV asses 2 s Channel IoC TH 15 Preparation ee a 2 EN range e TT 15 First time installation 5 Movie ratings l06kR 2 16 Use of the remote control ss 6 Region ratings lock AS AS ne 16 Control Buttons on the TV 7 Set Change PIN 16 NS trae eens 8 S e TT 17 CRT T ee a 8 Installation menu 17 Standard Sett
3. Auto Picture 6 modes Color Contrast Sharpness Control 2 x 10W Auto Sound Virtual Dolby Surround Auto Program Closed Captioning Full text Sleeptimer English French Spanish AV1 Audio L R input Composite Video input CVBS Component Video input YPbPr AV2 Audio L R input Component Video input YPbPr HDMI 1 HDMI 2 SPDIF output Digital Only Headphone output Audio L R input Composite Video input CVBS S Video input USB 46 2 Ibs 39 8 Ibs 72 6 Ibs 57 Ibs 34 2 x 24 8 x 11 4 38 9 x 12 9 x 28 3 31 7 x 24 x 8 3 36 7 x 11 3 x 27 1 32 80cm 37 94cm 150 W 150 W lt 1 W lt 1 W 100 250 V 100 250 V 50 60 Hz 50 60 Hz Specifications i 37PFL5332D 42PFL5332D 42PFP5332D 42PFP5342D 50PFP5332D 50PFP5342D PICTURE DISPLAY Aspect ratio Picture Display Picture Enhancement SOUND 16 9 Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 16 9 Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 16 9 Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 16 9 Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 2 x
4. TY ratings lock This allows you to prevent the viewing of the channels after a selectable time delay Locked channels can still be tuned but the picture is blanked and the audio is muted Press the cursor right and select Timer or Time Movie ratings lock Select Time Timer and press the cursor right This allows you to set the time after which the lock is set Select AM or PM to select the correct period of the day Enter the time with the digit or the cursor buttons and press OK to confirm Channel lock This allows you to completely lock a certain TV channel or external source Select the channels or subchannels you want to lock and press OK to confirm TV ratings lock Child lock TV cE inal Your TV is equipped with a V chip This allows you to control access to individual programs based on their movie and TV ratings All settings apply to E all AV inputs except HDMI The program content advisory data are sent by the broadcaster or program provider Select TV ratings lock with the cursor down Press the cursor right to enter the list Select an age based TV rating with the cursor up down and enter if present the list with content based ratings with the cursor right and select one content based rating Press OK to activate de activate the selected rating O Select another content based rating if you like and press OK again You need only enter your PIN code once while the menu is active
5. or widescreen 16 2 format Enhanced Definition TV EDTV EDTV is better in picture quality than analog television The formats for EDTV are 480p widescreen 16 9 or traditional 4 3 EDTV is in the middle range quality between SDTV and HDTV High Definition TV HDTV HDTV has the highest quality for digital broadcast formats Its resolution is widescreen format 16 9 Combined with digitally enhanced sound technology HDTV sets new standards for sound and picture quality in television DTV is by far a more flexible and efficient technology than the analog broadcast system Analog broadcasts can only provide one program at a time Digital television can broadcast a high definition program or more than one standard definition program at the same time This is often referred to as multicasting Digital television can also give you interactive video and data services through a single digital channel Note Use only a soft cloth to clean the front of the TV Do not insert the power plug in a wall socket before all connections are made Place the TV ona solid surface or place the TV on the supplied stand For the mounting instructions of the stand see the Cover Page For ventilation leave at least 4 to 6 free all around the TV Do not place the TV on a carpet To prevent any unsafe situations no naked flame sources such as lighted candles should be placed in the vicinity Avoid heat direct sunlight and exposure to rain or
6. 12 Software upgrade EPEE A E EEEE EEEE EEEE EE 21 Equalizer AE ENE EEE T ESE EEE E EEEE E aE 12 Connect Accessory D VICES AE EA EE 21 NO a ececsecaucdedvatcesee 12 Set Top T 21 Se AN CS TE E E E 12 Progressive Scan DVD Player Recorder to TY 22 Digital Audio Language sss sss 12 DVD Player DVD Recorder VCR to TV ses 22 Alternate audio 12 Video Camera Games Console to TY 23 lt TAS coarse ease casas ca casas aaa 12 Side connections USB Headphone est EE TOE 23 Sound mode sss sss essen 12 Digital Surround recever 23 Headphone volume ss 12 Multimedia browser sss sese 24 AVL Automatic Volume Leveler ss 12 Multimedia Browser menu 24 Delta VON 24 ansocccassdeesnssno career 12 Record with your precordenr eeen e eoo eee eooo eeen e oeeo enoo o oo eono 25 Auto SUFrOUNd sisccateacaossea2stcetsacscsneasescoueacusedeveloetocsosacaeesedeavend vteate 12 Record a TV programes 25 Features MENU ssseesescseeeecccccscececcccceeeccocccccececccccecccccoccseceeceo 13 To select connected devices 25 Closed Captions ss 13 Troubleshooting Tips 26 Caption Sr ICE TS etcetera 27 Digital caption service 13 COS a a on 28 Digital caption options 14 Specifications 29 a leeptMET esain eni reaa 14 Annex 1 Philips TV software upgrade with portable memory 31 Favorite MSC ae ot ec ot into 15 Annex 2 Philips TV Slideshow Format with background music 33 Child lock MER sees es essen ennenen 1
7. 15W Auto Sound Virtual Dolby Surround Ouput Power RMS Sound Enhancement Sound System CONVENIENCE Auto Program Closed Captioning Full text Sleeptimer ON SCREEN DISPLAY LANGUAGES English French Spanish CONNECTIVITY Bottom Side AV1 Audio L R input Composite Video input CVBS Component Video input YPbPr AV2 Audio L R input Component Video input YPbPr HDMI 1 HDMI 2 SPDIF output Digital Only Headphone output Audio L R input Composite Video input CVBS S Video input USB WEIGHT amp DIMENSIONS Weight incl Packaging 72 6 lbs 88 Ibs 88 Ibs 138 6 lbs Weight excl Packaging 57 lbs 70 4 Ibs 70 4 Ibs 124 3 Ibs Carton Dimension WxDxH 38 9 x 12 9 x 28 3 46 4 x 32 2 x 12 9 46 4 x 32 2 x 12 9 52 3 x 35 9 x 14 8 Product Dimension WxDxH 36 7 x 11 3 x 27 1 41 2 x 30 1 x 10 4 41 2 x 30 1 x 10 4 49 2 x 34 5 x 4 2 screen size 37 94cm 42 107cm 42 107cm 50 127cm POWER CONSUMPTION 185 W 245 W 400 W 500 W STANDBY POWER lt 1 W lt 1 W lt 1 W lt 1 W CONSUMPTION VOLTAGE 110 250 V 110 240 V 110 240 V 110 240 V CONSUMPTION 50 60 Hz 50 60 Hz 50 60 Hz 50 60 Hz 30 Annex 1 Philips TV software upgrade with portable memory Introduction Philips offers software upgrade capability for your TV using USB portable memory After you have completed a software upgrade your TV will typically perform better What
8. Player Recorder Arri re du lecteur enregistreur DVD Source Button Parte posterior del reproductor Bouton Source grabador de DVD Boton Source Remote Control T l commande HDMI Input Add for DVD Control remoto E Le E Entr e HDMI Recording T l viseur Entrada HDMI L R on L AV1 TV T l viseur CABLE ANTENNA 750 Add for DVD Recording SS EE CIE DIE O COMP VIDEO S VIDEO VIDEO AUDIO Cle eZ OUT OUT OUT i ANTENNA TELEVN j CABLE Back of DVD Player Recorder Arri re du lecteur enregistreur DVD Parte posterior del reproductor grabador de DVD i C000 GD 0 08 8 PHILIPS Remote Control Source Button T l commande Bouton Source Control remoto Bot n Source Para detalles consulte la pag 22 AE DVD Player Recorder VCR to TV FR Lecteur DVD Enregistreur DVD Magnetoscope vers le t l viseur ES Del reproductor grabador de DVD VCR al TV Back of TV Arriere du T l viseur Parte posterior del TV Add for DVD Recording AUDIO OUT DIGITAL Source Button Bouton Source Boton Source VIDE Composite Audio video Audio Vid o composite ae Back of DVD VCR Arri re du DVD Audio Video compuesto Remote Control Magn toscope T l commande Parte posterior del Control remoto DVD VCR Details refer to page 22 D tails consultez le page 22 Para detalles consulte la pag 22
9. USB portable memory and restart your TV with the power switch at the right side of the TV Your TV will start up with the new software 32 Annex 2 Philips TV Slideshow Format with background music Notes The latest version of this document can be found on the Philips support website www philips com usasupport Use the type number of your TV e g 32PFL7332D 37 to find this documentation and other related files Philips can t be held responsible for any problems that may occur as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Introduction This document explains how to make a Philips slideshow file with background audio Be aware that the content of this document is addressing technical or software skilled users To start the slideshow open the slideshow file in the Home network Browser of your TV Press the MENU button on the remote control after having inserted a USB device and switched on the TV Go to where you stored the slideshow file alb on your portable memory Select the slideshow file and press the OK button to start the slide show To stop a slide show press the W button General Rules e The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow files using simple tools e All references to network content must be based on the global address of the content
10. You can lock unlock any number of ratings on the list without re entering your Age based Rating Content based Rating code Each ratings item has a box graphic in front of it to indicate whether or not All none programs carrying that rating are currently locked None none e box with a X all items in the contents based list are locked as well TV Y Hone e empty box the item is unselected TV Y7 FV Fantasy Violence e box with a T some content based ratings are selected unselected TV G none TV PG D Dialog L Language When All has been selected all items in the age based and in the contents based S Sex lists are locked V Violence If while All is selected any other item either an age based or content based item TV 14 D Dialog is unselected then All is automatically unselected L Language G None is the selection for items that either have no rating information or have a S Sex T rating of None Both will be locked l TV MA Dire When an item on the age based list is selected all items below that item of the same group are locked as well OSE When you select a content based rating all identical content based ratings in the V Violence younger age based categories are also selected TV Y appropriate for children of all ages with themes and elements suitable for children aged 2 6 TV Y7 programs designed for children age 7 and older TV Y7 FV programs include fantasy violence m
11. be fixed to the opening of the TV and locked with a special key The other end is attached to a fixed point Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world All other registered and unregistered trademarks are the property of their respective owners 25 Troubleshooting Tips Symptoms Possible Causes What you should do No display on screen Faulty power supply e Check whether power cord is properly connected into the mains socket If there TV s Power not turned is still no power disconnect plug Wait for 60 seconds and re insert plug Turn on on TV again e Press the POWER key on the TV and wait for 10 15sec e TV go to standby after e Press the POWER key on the remote control 10min without video e Faulty aerial and cable e Check whether euroconnector cables or aerial sockets are properly connected e Wrong source selected Check whether the source is correctly selected Press Source button to enter Source list and select the correct source Poor reception e Faulty antenna connection Faulty antenna connection snowish picture and Weak transmission noise Audio in L R gt select AV1 Sound interference Electrical appliances e Try turning off any electrical appliances for example hairdryer vacuum cleaner interference that are in use Interference lines e Wrong detection of e
12. cs Sharpness c This will adjust the sharpness of fine details in the picture D o shpres Si Color temperature Color temperature Custom color temper This will increase or decrease Warm red and Cool blue colors to suit O i Pixel Plus personal preferences Select Cool to give the white colors a blue tint Normal to give the white ui colors a neutral Warm to give the white colors a red tint Custom color temperature only when Color temperature is set to Custom Fine tunes the white point WP and black level BL of the picture Select Custom color temperature and press the cursor right Use the cursor buttons to select and adjust the settings of R WP allows you to customize the color temperature by adjusting the red whitepoint of the picture G WP allows you to customize the color temperature by adjusting the green whitepoint of the picture B WP allows you to customize the color temperature by adjusting the blue whitepoint of the picture R BL allows you to customize the color temperature by adjusting the red blacklevel of the picture G BL allows you to customize the color temperature by adjusting the green blacklevel of the picture Use the color button to reset to the predefined settings O Press the cursor left to return to the Picture menu Pixel Plus for everyday viewing Pixel Plus is the most ideal setting as it fully processes the image to make every single pixel the
13. down The Multimedia browser will allow the user to browse content stored on the inserted USB device Press the cursor right The 2 panel browser will be shown with the left panel containing the content types Music Picture The right panel will display the content that is available of the selected content type Press the cursor up down to select a content type and press the cursor right to enter the content O Press the cursor up down to select a file or a directory Note Press the green color button to display all the image files in the current directory as thumbnails when browsing pictures Press the green button again to display the image files in a list In case a file is selected press the OK button to display a picture file or to play an audio file In case a directory album or playlist is selected press the cursor right to enter the content or press the OK button to start a slide show or a playback of the files present in the directory album or playlist Press the cursor left to keep music playing and switch back to the Multimedia menu Press one of the color buttons on the remote control to perform the corresponding function mentioned at the bottom of the screen The blue color button can be used to let the color re appear To stop playing content press the MENU button on the remote control Note It may work with certain memory devices but not with most camera devices USB devices are not supplied
14. e Content on a Portable Memory PM doesn t have a global address as a result content from a PM can never be referenced from a slideshow not stored on the PM itself e To maintain portability a slideshow stored on a PM should ONLY reference content on the same PM Referencing global addresses can result in inconsistencies if the PM is used on a non networked CE device The latter is however not forbidden it is only a recommendation e It is preferable that URLS referencing PM content are based on a relative path starting from the directory where the slideshow is stored This path includes the device or drive name of the PM An absolute path to content will also be supported relative path pictures test1 jpg tamper jpg new bird jpg absolute path USB1 pictures1 foo_bar jpg C f1 jpg organization jpg General Format The format and syntax below should be used to create the slideshow file simple ascii text with the extension alb ALB Examples slshow1 alb summer_holiday_2004 ALB test alb The following syntax should be used to create the text file lt xml version 1 0 encoding ISO 885h9 1 7 gt lt philips slideshow version 1 0 gt lt title gt Title of the slideshow lt title gt lt audio gt audio_urn lt audio gt lt slide duration gt 30 lt slide duration gt lt slides gt lt slide gt slide_1_url lt slide gt lt slide gt slide_2_url lt slide gt lt slide gt slide_3_url lt slide gt lt slide gt
15. languages if they are being transmitted 7T1 2 3 or 4 Often used for channel guide schedules bulletin board information for Closed Captions programs news weather informations or stock market reports Not all Caption services are necessarily being used by a TV channel during the transmission of a Closed Caption program See Closed Caption in the TV Features menu see above to turn the Caption service On or Off Note This television provides display of television closed captioning conforming with the EIA 608 standard and in accordance with Sections 15 119 of the FCC rules How to switch on To switch ON the closed caption feature go to feature gt closed caption and select On or On during mute Digital caption service This allows you to configure the way you choose to view the digital captioning Select one of the digital service channels made available by the caption provider There are 6 standard services Service 1 is designated as the Primary Caption Service This service contains the verbatim or near verbatim captions for the primary language being spoken in the accompanying program audio Service 2 is designated as the Secondary Language Service This service contains captions in a secondary language which are translations of the captions in the primary Caption Service The other service subchannels are not pre assigned It is up to the discretion of the individual caption provider to utilize the remaining s
16. provides an uncompressed all digital audio video connection Please use a certified HDMI cable no longer than 15m HDMI to DVI I Convertor cable Devices with only a DVI connec tion can be connected with a DVI to HDMI convertor cable You must connect the Right Red and Left White audio connectors of AV1 of the TV to the audio output connectors of the device Better Component Video input Provides superior picture quality by separating the green blue and red luminance signals Typically used with red white audio cables Good S Video Supplies a better picture than RF and Composite connections Used with red white audio cables Basic Composite Audio Video Separate video yellow and audio red white cables that provide a basic connection from the cable box and other devices Note The color of audio inputs may differ e g red white or red black Good RF cable Digital Antenna cable Basic RF cable Analog Antenna cable Provides a connection for both audio and video Reception vary by location Sup rieure HDMI L interface HDMI High Definition Multimedia Interface propose une con nexion d compress e audio vid o en ti rement num rique HDMI propose ultimate connexion Veuillez utiliser un c ble HDMI certifi HDMI vers DVI I Cable de convertisseur Les dispositifs dot s seulement d une connexion DVI peuvent tre raccord s l aide d un cable de convertisseur DVI
17. the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Digital Content Issues e Only FAT DOS formatted initialized portable memory is supported Errors in this formatting can result in unreadable content If such problems appear try to re format the card Be aware that formatting the card will also delete all the content on it pictures music e The following file types are supported jpg jpeg mp3 alb m3u and pls e Only linear JPEG picture formats are supported Progressive JPEG and JPEG2000 encodings are not supported e The length of a filename or directory name is limited to the length specified by the FAT12 16 32 file systems e Max levels of nested directories is 19 e Never use the supported file type extensions jpg jpeg mp3 alb m3u and pls as extensions for directories as these directories will be treated as corrupted files e The MP3 decoder does not support MPEG1 Layer 1 or Layer 2 playback e MP3 Pro files can be played with normal MP3 quality e The access and response time of the content on a device can differ depending on the type or brand of the device e The access and response time of the content on a device will decrease the more unsupported or corrupted files are on the device Digital Camera Issues If a USB connection between your digital ca
18. the signal splitter and to the cable IN jack G on the back of the cable box e Connect A V cables not supplied to the VIDEO and AUDIO L and R outputs on the back of the cable box and to the AV2 video labeled VIDEO and AUDIO labeled L and R jacks 4 on the back of the TV e To view programs from your cable box first press the SOURCE button on the remote control e Press the cursor down or up buttons until the AV2 signal source is selected e Press the OK button to confirm your selection The AV2 input source becomes current for the viewing of cable TV programs through your cable box Note If your cable box Audio Video outputs will not supply video and stereo audio to the TV you will need to make the connection shown above in the example Cable box with RF INIOUT CABLE 750 Cable box with S Video component video YPbPr or HDMI connectors See Connect Accessory Devices p 22 Antenna Via antenna you can watch whatever DTV programs being broadcast in your area for free If you re not sure what HDTV programming is available in your area contact your local content provider or your local electronics store retailer Broadcasters are in the middle of a transition from analog to digital TV This means that a given broadcaster will have two channels on the air one analog and one digital Connect the incoming antenna signal to the CABLE ANTENNA 75 0 I jack at the bottom of the TV See page 1
19. vers HDMI Vous devez raccorder les connecteurs audio droit rouge et gauche blanc AV1 du t l viseur aux connecteurs de sortie audio du dispositif Excellente Entr e vid o composant Fournit une qualit dimage sup rieure en s parant les signaux de luminance vert bleu et rouge Utilis e g n rale ment avec les c bles audio rouge blanc Remarque l entr e vid o composant apara t sur le tableau de connexions comme YPbPr Bonne S Video Fournit une meilleure image que les connexions RF et composite Utilis e avec les cables audio rouge blanc De base Audio Vid o Composite C bles vid o jaune et audio rouge blanc s par s fournissant une con nexion de base partir du boftier de connexion et autres dispositifs Remarque La couleur des entr es audio peut varier par ex rouge blanc ou rouge noir Bonne C ble RF Antenne C ble Num rique De base Cable RF Antenne Cable Num rique Fournit une conexion de base pour l antenne ou le service et la vid o La mejor HDMI La interfaz multimedia de alta definici n HDMI por sus siglas en ingl s pro porciona una conexi n de audio video completamente digital sin comprimir La HDMI proporciona la mejor conex i n S rvase utilizar un cable HDMI certificado De HDMI a DVI I Cable convertidor Los dispositivos que s lo cuenten con una conexi n DVI se pueden conectar con un cable convertidor de DVI a HDMI Debe conectar los conec
20. 4 Annex 3 Philips TV USB 35 LOCK TTT 15 gS End of life directives Philips is paying a lot of attention to produce environmentally friendly products in green focal areas Your new TV Care of the screen contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the See Tips p 28 discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed off Please ensure you dispose off your old TV according to local regulations Recycling The materials used in your set are either reusable or can be recycled To minimise environmental waste specialist companies collect used appliances and dismantle them after retrieving any materials that can ENERGY STAR be used again ask your dealer for further details CA Guide to Digital TV _ Guide to Digital TV What is Digital Television DTV Digital Television DTV is relatively new type of broadcasting that promises to transform television viewing into a whole new experience Digital technology is used to capture images and sound to deliver a better picture quality DTV technology is also capable of multicasting and interactive capabilities There are many levels of digital television quality The most common are Standard Definition TV SDTV SDTV is the basic level of quality display and resolution for both analog and digital Transmission of SDTV can be in the traditional 4 3
21. 8 for details on using Autoprogram to store channels in the TV s memory Note This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching Direct Broadcast Satellite DBS Satellite systems offer many of the same premium channels as cable systems and often at a lower price To get these channels you ll need to install a small dish antenna outside There are 2 main DBS systems DirecTV amp DishNetwork These systems require separate proprietary set top receiver boxes to decode their signals and send them to your digital TV set These boxes may include a digital TV tuner for off air DTV broadcasts Satellite broadcasters also provide major local channels depending on the market in which you live DBS also provides service in areas not covered by cable because they are in rural areas or other areas not passed by a cable line DBS also allows you to watch pay per view events Before installing your TV or before hanging it on the wall connect all your accessory devices See p 22 Refer to the bottom of the set for the correct operation voltage Insert the power cord in the wall socket Consult your local dealer if your mains supply is different To prevent damaging the mains AC cord which could cause a fire or electric shock do not place the TV on the cord O Remote control Insert the 2 batteries supplied Type R6 1 5V Be sure the and ends of the batteries line up
22. 9 e B L V2 amp l Q Connect DVD player DVD recorder to the TV using HDMI cable IDN D 8 N HDMI 2 334 Turn on TV and DVD Player DVD recorder Press CH or CH on e mo en remote control to tune to the video supplied by HDMI Remote Control l Add for DVD Insert a prerecorded DVD into DVD player DVD recorder and press Recording i i PLAY to verify correct connection Progressive Scan DVD Player Recorder to TV Next Source Using Component Video Input YPbPr Insert Component Video connectors into their corresponding jacks on both DVD player DVD recorder and TV Y Pb and Pr Connect red white audio cables into the audio output jacks on DVD player DVD recorder and audio AV inputs on TV Turn on TV and DVD Player DVD recorder Press AV on remote control until the connected source appears on TV screen Insert a pre recorded DVD into DVD player DVD recorder and press PLAY to verify correct connection ANTENNA CE CABLE Back of DVD Player Recorder Remote Control Source Button DVD Player DVD Recorder VCR to TV Next Source Using composite audio video Q Connect composite video cable to Video input on back of TV and Video output on the back of DVD VCR player or recorder Add for DVD Recording O Connect audio cables red white to audio AV inputs on back of TV and Audio outputs on back of DVD VCR player or recorder Turn on TV and DVD VCR player or record
23. Antenna or Cable TV channels first make your selection in the Settings menu see p 17 Note You dont have to start the installation again once you have searched for and stored the available TV channels PREV CH Press to alternate between the currently viewed channel and the previously viewed channel Press the dot for digital channels INFO Display information Press to display when available information about the selected TV channel and program or accessory device The quality and accuracy of the information on the information banner are transmitted from broadcasters You may see a difference in broadcast time if the broadcaster is from a different time zone area Display clock Select to activate deactivate the clock display on the screen POWER r FAVORITES CC ACTIVE CTRL vew GGG C C I BE Q lt o DOUCE JO C JOUE SOURCE gt g PHILIPS TELEVISION FORMAT Press this button to summon a list of available display formats depending on the receiving signal This lets you choose the display format of your preference Press this button repeatedly to select another picture format Automatic Super Zoom 4 3 Movie expand 14 9 Movie expand 16 9 Wide screen CD Q O rosy H e Movie expand 16 9 Wide screen Automatic makes the picture fill the screen as much as possible Super zoom removes the black bars on the side
24. Check whether power cord is properly connected seen on S Video signal e Press the CH key on the remote control and do a channel up followed by a channel down e Make sure no composite video are connected on the same AV input Reddish picture in e Wrong setting of DVD e Set the DVD player to the correct output video format AV1 2 player e Zero volume level e Try increasing volume You will not see the volume indication if OSD set to minimum e Sound muted e Check that the sound is not muted e Aim remote control directly at sensor on front of TV e Wrong audio selection e Press MENU gt TV menu gt Installation gt Connections gt Intermittent or e HDCP see glossary e Noise is displayed if the connected digital equipment s DVD player or set up flickering picture on authentication failed box HDCP authentication failed Check user manual for the digital equipment in HDMI you are connecting e Use a HDMI compliant cable e Try unplugging the HDMI cable and replugging it back Black bar on top and PC refresh rate too high Change PC refresh rate to 60 Hz bottom of screen in PC mode Picture position Slight differences in output When displaying a High Definition signal from the YPbPr inputs or HDMI input if adjustment signals from different brands necessary you can adjust the picture position to the center of the screen with the and types of HD sources cursor left right or up down buttons on the remote
25. User Manual 26PFL5302D Manuel de l utilisateur 26PFL5322D Guia del usuario 32PFL5322D 32PFL5332D 37PFL5332D 42PFL5332D 42PFP5332D 42PFP5342D S0OPFP5332D S0OPFP5342D Thank you for choosing Philips 4 nn e EE Gracias por escoger Philips Besoin d une aide i Need help fast Necesita ayuda H 7 e e rapide inmediata Les Guide d utilisation rapide et Read your Quick Use Guide and or Manuel de l utilisateur regorgent peo OEO g Guia valea aal Owner s Manual first for quick tips d astuces destin es simplifier Manual del usuario en donde encon that make using your Philips product l utilisation de votre produit Philips trara more enjoyable Toutefois si vous ne parvenez consejos que le ayudar n a disfrutar If you have read your instructions pas r soudre votre probl me plenamente de su producto Philips and still heed assistance vous pouvez acc der Si despu s de leerlo a n necesita ayuda notre aide en ligne l adresse ici you may access our online help at ene consulte nuestro servicio de hili J gt www philips comlusasupport www philips comlusasuppo Ou formez le or call 1 800 661 6162 Francophone llame al tel fono 1 888 PHILIPS 744 5477 1 888 PHILIPS 744 5477 9 l English speaking 1 888 PHILIPS 744 5477 Veillez avoir votre produit y tenga a mano el producto port e de main y numero de modelo serie et model serial nombre Quick Use Guide Inside Guide d usage Rapide Incluse Gu
26. VCRs The Emergency alert signalling scheme defined in the standard allows a cable operator to disseminate emergency alert information related to state and local level emergencies and warnings in a cost effective and efficient way while minimizing disruption of programming An Emergency alert message will have one of the following priorities Low Medium High or Maximum The Emergency alert message with priority High or Maximum will always be presented Low or Medium will be present or ignored depending on the selected setting Important When the IV clock is undefined See Clock p 21 the Emergency Alerts will be ignored The Emergency Alert message display will contain following information The Emergency Alert text The start time date The end time date Select Show Emergency Alerts in the Menu preferences menu Press the cursor right and select one of the Emergency alerts options Always when you always want the Emergency alert messages to be displayed when available Skip low priority when you want the messages with low level to be ignored Skip low medium priority when you only want the messages with high priority to be displayed 19 TV menu Installation Connections Connections Audio In L R Note Adjusting the clock is necessary for the correct working of Lock after See Child lock menu p 16 features Closed captioning will not be displayed when the clock is
27. all uninstalled channels digital channels that are not encountered any longer will be removed new channels found will not be added to any favorite list already installed channels will not be renumbered Weak channel installation This enables you to do a weak ATSC digital channel installation This is only available for TV channels installed via an antenna connection see p 4 If a certain channel you expect to see is not tuned or is weak you can install it manually Call your local broadcasting station to know what channel its being transmitted on Select that channel in the displayed list of TV channels in the antenna mode The signal strength is displayed and updated continuously as you rotate the antenna Installation mode This allows you to select the already stored terrestrial or cable TV channels Choose for Antenna or Cable whether these signals are present Uninstall channels This allows you to uninstall a stored channel so that it is no longer possible to tune to This also allows you to reinstall an earlier uninstalled channel Select the channel you want to uninstall Press the green color button to uninstall the selected channel The uninstalled channel is indicated in the list by an icon in front of the uninstalled channel Press the green color button again to reinstall the uninstalled channel Note Uninstalled channels are not reinstalled during an installation update 18 C Pref
28. ams carrying that rating are currently locked e box with a X movies with this rating are locked e empty box movies with this rating are unlocked When All has been selected all items on the movie ratings list become selected All movies are locked If while All is selected any other item is unselected then All is automatically unselected When NR has been selected no other item is selected When any other item has been selected all ratings below are selected as well thus all movies with those ratings will be locked Region ratings lock This function allows you to control access to digital programs based on downloaded Region Ratings Select Region ratings lock with the cursor down Press the cursor right to enter the list Select a Region rating with the cursor up down and enter if present the list with content based ratings with the cursor right and select one content based rating Press OK to activate de activate the selected rating O Select another content based rating if you like and press OK again Each ratings item has a box graphic in front of it to indicate whether or not programs carrying that rating are currently locked e box with a X all items in the contents based list are locked as well e empty box the item is unselected e box with a T some content based ratings are selected unselected Set Change PIN Select Set or Change PIN with the cursor down If no PIN code exists ye
29. being displayed Press the clock key again to switch off the clock if you want to see closed caption TV menu Installation Clock Auto clock mode Time Dav Time zone Daylight saving Download rating table This allows you to add region ratings lock options next to your current ones Select Download rating table with the cursor down Press the cursor right to enter the list You are asked to enter your code see page 17 If the code is correct you can choose to on off to download the rating table Select on off to download the rating table Press OK to activate de activate the selection Note Before activating please ensure regional ratings are broadcasted Connections This menu allows you to name label the accessory devices you have connected to the external inputs outputs Select Connections in the Installation menu Press the cursor right to enter the list of types of devices connected to the selected input Select the accessory device with the cursor up down When you select AV1 AV2 HDMI 1 HDMI 2 Side or Audio in L R a list appears allowing you to identify which type of accessory device is attached to this input Note If the accessory device has DVI output only use a DVI to HDMI adapter cable to connect to the HDMI connector You need to also connect the audio cable to L and R AUDIO jacks Next go to Menu gt TV menu gt Installation gt Connectio
30. best it can be improving contrast sharpness picture depth and color reproduction and brilliance from every source including High Definition 10 Dynamic contrast Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on the screen changes Normally select Maximum It may be preferred to select Minimum Medium TV menu TV settings Maximum or Off Picture Active Control Press the cursor right to enter the list olor temperature Select one of the settings with the cursor up down Press the cursor left to return to the picture menu DNR Digital Noise Reduction Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals Press the cursor right to enter the list C Select Off Minimum Medium or Maximum according to the image noise MPEG artifact reduction MPEG artifact reduction On smoothens the transitions on digital content Select On or Off Color enhancement When activated this feature automatically controls green enhancement and blue stretch It makes the colors more vivid Press the cursor right Select Off Minimum Medium or Maximum in order to activate de activate Color enhancement with the cursor right Active Control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible Select Active Control Pr
31. color button to stop the function Press the red color button again to exit the demo and to return to TV mode Note The selected demo is played once The demos require no user interaction except for starting the demo Settings assistant Active control Picture menu Press the MENU button on the remote control to summon the TV menu The TV menu gives you an overview of the menus you can select Note Depending on the input signal one or more menu items may not be selectable Picture menu Note Some menu items are not available in case of HD sources po Press the cursor right to select Picture Press the cursor right again to enter the Picture menu Settings assistant Select the menu items with the cursor up down Reset to standard Adjust the settings with the cursor left right or enter the list of submenu items Picture with the cursor right Select a submenu item with the cursor up down Contrast se M C H A KS lt E E Brightness This will adjust the light output of the complete picture which will mainly affect the darker areas of the picture This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged Color This will adjust the saturation level of the colors to suit your personal LV men DRE TV settings Pine O E Tint sist Contrast l E i Allows you to select the color mix hue of the picture tande Brightness llii
32. control Occasional appearance Characteristic of liquid This symptom is not a problem The liquid crystal panel is built with very high and black spots on the crystal panel precision technology giving you the fine picture details Occasionally a few screen LCD TV only non active pixels may appear on the screen as a fixed point of red blue green or black Note that this does not affect the performance of the set PC modes do not e Wrong connections Check whether connections are correct work e Wrong source selected Check whether the source is correctly selected Press Source button to enter Source list and select the correct source e Wrong display resolution Check whether you have configured the computer on a compatible display resolution TV not responding Check if the remote control is in TV mode to Remote control Check if the green led blink when using remote control e Wrong polarity of batteries Check polarity of the batteries e Flat batteries Try changing the batteries Unable to understand Wrong language selected Press the MENU key to exit menu from screen Press the MENU key to enter the language on accidently main menu and press OK key Use the cursor down to select the third item on screen to operate set the main menu Press the cursor right key twice to enter into the next menu level and the cursor up and down key to select correct language Press the OK key confirm selection No sound from PC E Check AUDIO IN connec
33. correctly inside of case is marked The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose of exhausted batteries according to local regulations Turn the TV on Press the power switch 1 at the side of the TV You may also press CH or POWER button on the remote control The TV can take up to 15 seconds to power up A blue indicator light on the front of the TV lights up First time installation time installation Note The first time and only the first time you turn on your set you see an installation introduction screen The Installation procedure consists of a series of screens that guide you through the process After an introduction screen you are asked to select a language of the TV s on screen menus The text of the header and the info on screen continuously change language Press the cursor up down to highlight your language Press the OK button Follow the on screen instructions to proceed Part 1 TV installation Please skip this section if you have no cable connected to the Antenna input of the TV Note The TV will take approximately 10 15 seconds to start up Select the desired Language and press the green button Next Select Cable or Antenna in the Installation mode and press the green button Next Auto Installation may take 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider or broadcas
34. deo source or transmitter such as a computer DVD player or set top box and the digital display or receiver such as a monitor television or projector The analog component video signal 28 Specifications PICTURE DISPLAY Aspect ratio Picture Display Picture Enhancement SOUND Ouput Power RMS Sound Enhancement Sound System CONVENIENCE ON SCREEN DISPLAY LANGUAGES CONNECTIVITY Bottom Side WEIGHT amp DIMENSIONS Weight incl Packaging Weight excl Packaging Carton Dimension WxDxH Product Dimension WxDxH screen size POWER CONSUMPTION STANDBY POWER CONSUMPTION VOLTAGE CONSUMPTION 16 9 Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 37 4 Ibs 28 6 lbs 33 1 x 22 5 x 8 0 26 8 x 21 1 x 7 9 26 66cm 125 W lt 1 W 100 250 V 50 60 Hz 26PFL5322D 16 9 Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control 37 4 Ibs 28 6 lbs 33 1 x 22 5 x 8 0 26 8 x 21 1 x 7 9 26 66cm 125 W lt 1 W 100 250 V 50 60 Hz 29 32PFL5322D 32PFL5332D 16 9 16 9 Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control Auto Picture 6 modes Color Contrast Sharpness Control Pixel Plus Progressive Scan 3 2 2 2 motion pull down Active Control
35. ding to your own preference Select a color and one of the type options Sleeptimer This sets a time period after which the TV automatically turns to standby Select Sleeptimer Press the cursor right Select a value with the cursor up down The list will have values from 0 to 180 minutes When 0 is selected the sleeptimer is turned off You can always turn off your TV earlier or select another time set Child lock menu _ lock menu Child lock menu Features Child lock ons Lock after Channel lock TV ratings lock on Movie ratings lock Child lock m This menu can control special functions for the TV channels Select Child lock in the Features menu with the cursor up down Press the cursor right to enter the child lock menu You will be summoned to enter your PIN See below Follow the instructions screen Set Change PIN V Select Set or Change PIN with the cursor down If no PIN code exists yet the menu item is set to Set PIN Follow the instructions on screen If a PIN code has previously been entered the menu item is set to Change PIN Follow the instructions on screen All number combinations from 0000 to 9999 are valid numbers The Menu preferences menu reappears with a message confirming that the PIN has been created 14 Lock after Note Lock after is only selectable if time is known See Clock menu p 21 Child lock lock Lock after Channel lock
36. e jpg pic003 jpg pic004 jpg pic005 jpg pic006 jpg pi _ n EEEE COOC London2005 pic001 jpg 1024 768 Notes e Your TV supports slide shows with background music See Annex 2 p 33 e The playback will continue to play even if temporarily switched to browser screens The audio will be stopped when another song starts playing or when the end has been reached Progressive JPEG files are not supported The length of the files should not exceed 128 characters Do not use a dot in folder naming More technical remarks can be found in Annex 3 p 23 Following icons may appear C folder pictures j music E self made playlist album USB device The Multimedia browser application is invoked from the main menu press the MENU button by selecting the USB device and pressing the cursor right Notes Following file formats can be reproduced s For pictures JPEG e For audio MP3 MP3 Pro Only FAT DOS formatted memory devices are supported If your digital camera is not supported make sure your camera is switched on and verify if its configuration settings are correct see the manual of your camera Philips cannot be responsible if your USB device is not supported Multimedia Browser menu Insert a USB device Select the USB device under Multimedia with the cursor up
37. er Press SOURCE button on the remote control until AV1 or AV2 appears on TV screen Insert pre recorded videotape DVD into DVD VCR player or recorder and press PLAY to verify correct connection Next go to Menu gt TV menu gt Installation gt Connections gt Audio in LIR gt AVI Back of DVD VCR Remote Control 22 Video Camera Games Console to TV Using Composite Audio Video Input Connect the video cable yellow from the video output on camera or other device to the video input yellow located on the side of TV OR Connect S video cable to S video input on side of TV and to the output AUDIO VIDEO Connect audio cables red white from audio outputs on device to audio f inputs red white on the side of the TV ao A Tip For mono devices connect only white audio cable from device s audio B output to white audio input on the side of TV seit err SWDEO Turn on the TV and the device Press the SOURCE button on the remote control until SIDE appears on TV screen Press PLAY on the device to verify connection a A Note Interference will occur when S video and Composite audio video are a connected alee Source Button HO Side connections USB Headphone Headphone Insert the plug into the headphone socket l i as shown Press the MUTE button on the remote control to switch off the internal loudspeakers of the TV The headphone impedance must be betwee
38. erences menu 7 menu Preferences Press the MENU button Location Select Installation with the cursor down and press the cursor right to select OSD the Preferences menu Show ent Download rating ta Location This allows you to select the location of your TV If you choose for Shop it will result in fixed settings of picture and sound The location Home will give full flexibility to change any predefined settings for picture and sound de OSD Q Select OSD Press the cursor right to select Normal or Minimum Normal to activate the continuous display of the channel number for max 10 minutes and extended display of TV channel and program information on screen E g information on the main or auxiliary program input signal quality of connected accessory devices the display format sound mode availability of Closed Caption service the audio language the rating sleeptimer setup Minimum to activate the display of reduced channel information Note When Closed Captions is switched on continuous display of the channel number and clock is not possible Volume indication bar will not be visible Show emergency alerts EAS This allows you to select the alert priority level of the information disseminated by the cable operator The standard SCTE18 defines an Emergency Alert signalling method for use by cable TV systems to signal emergencies to digital devices such as digital set top boxes digital TVs and digital
39. ervice channels 13 Digital caption options TV menu Features Digital caption options Reset to default Text color Digital caption options Text opacity Background color Background opacity Edge type This allows you to modify how digital captions are displayed on your TV Select from the following options to change the visual characteristics of your TV s digital captioning Reset to default Select this option to reset the digital caption options back to the captions provider default settings Press the OK button to confirm Size Select this option to select the size of caption display according to your own preference Select Default Automatic Small Standard or Large and press the OK button to confirm Style Select this option to select the font style of caption display according to your own preference Select Default Monospaced serif Serif Monospaced sans serif Sans serif Casual Cursive or Small caps Text Select this option to select the text color or the opacity of the text box of caption display according to your own preference Select a color and one of the opacity options Background Select this option to select the character background color or one of the background opacity options of caption display according to your own preference Select a color and one of the opacity options Edge Select this option to select the edge color or type options of caption display accor
40. ess the cursor right to enter the list of Active Control values Press the cursor right repeatedly to select the Active Control values Off or On The picture settings are being optimized continuously Those menu items can not be selected Press the OK button or wait for the time out to dismiss the Active Control display Picture format This menu item performs the same as the FORMAT button on the remote control See Use of the remote control p 6 11 C Sound menu __ TV settings Sound ista Equalizer Volume Balance Digital audio language Alternate audio Mono Stereo Sound mode Headphone volume 5 x TV menu TV settings Sound Auto surround On On anguag LL O Auto surround pia DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of DIGITAL Dolby Laboratories Sound menu Select Sound in the TV Settings menu Press the cursor right to enter the sound menu Select the menu items with the cursor up down and adjust the settings with the cursor left right Remember control settings are at normal mid range levels when the bar scale is entered Equalizer Allows you to change the frequency response of the sound to match your personal taste Volume This will adjust the sound output level Balance This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your lis
41. ext item in the list The list will be removed automatically after 6 seconds or press OK to remove immediately POWER Press to turn on off the TV from or to standby mode POWER The TV is never powered off completely unless it is __ physically unplugged DEMO Demo menu on off See p 9 Color buttons When functions attached to the color buttons the color buttons are shown on screen OPTION To select the Audio Language Closed Captions Picture format Equalizer and Clock OK to activate a setting to display the list of channels stored according to the selection made in the Installation mode Antenna or Cable p 18 starts playing content in the Home Multimedia Browser application p 25 MENU Settings menu on off see p 9 Exit menu from sub menu VOL Volume Press or to adjust the volume MUTE Turn off or on sound SOURCE Press this button repeatedly to select the source AV 1 AV 2 HDMI 1 HDMI 2 SIDE or TV when in TV mode according to where you connected the accessory devices p 21 To be continued FAVORITES CC ACTIVE CTRL we 9 C C2 DEMO a a 9 INFO O v a O zZ J DAE GEORGIO ele 4 SOURCE PHILIPS TELEVISION Cursor buttons Press the cursor buttons up down left right to navigate through the menus CH Channel selection To browse through the TV channels To select between
42. ia de Uso Rapido Incluida For Customer Use A l usage du client Para Uso del Cliente AE Enter below the Serial No which is located on the rear of the cabinet Retain this information for future reference asistencia en linea en www philips com usasupport while with your product and Model Serial number FR Entrez ci dessous le num ro de s rie qui se trouve a l arri re du bo tier du dispositif Conservez ces informations pour r f rence ult rieure ES Escriba a continuaci n el N de serie el cual se encuentra en la parte posterior del gabinete Guarde esta informacion para referencia futura Model Mod le Modelo Serial S rie Serie 26PFL5302D 26PFL5322D 32PFL5322D 37PFL5332D 42PFL5332D 42PFP5332D 42PFP5342D 50PFP5332D 32PFL5332D 50PFP5342D M6 18mm x 4 p M5 25mm x 2 26PFL5302D 26PFL5322D 37PFL5332D 32PFL5322D 42PFL5332D 32PFL5332D 42PFP5332D 42PFP5342D 50PFP5332D 50PFP5342D No wall mounting bracket provided Montage pour mur non inclus Montaje para pared no incluido How to make the optimal connection These cables are not provided with the set Comment r aliser une bonne connexion Ces c bles ne sont pas fournis avec votre t l viseur Como realizar la mejor conexion Estos cables no se proporcionan con el aparato BT OEN HET T DX PE 11 1 Audio Best HDMI High Definition Multimedia Inter face
43. icture quality These are 2 separate Y C video signals from the S VHS and Hi 8 recording standards The luminance signals Y black and white and chrominance signals C colour are recorded separately on the tape This provides better picture quality than with standard video YHS and 8 mm where the Y C signals are combined to provide only one video signal Process by which digital sound can be transmitted Refers to the ratio between the length and height of the screen Wide screen televisions have a ratio of 16 9 conventional screen TV sets have a ratio of 4 3 Provides an uncompressed all digital audio video interface between the TV and any HDMI equipped audio video component such as set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two channeldigital audio Television pictures are not broadcast in the same way in all countries There are different standards BG DK I and LL The System setting p 5 is used to select these different standards This is not to be confused with PAL or SECAM colour coding PAL is used in most countries in Europe Secam in France Russia and most African countries The United States and Japan use a different system called NTSC The inputs EXT1 and EXT2 are used to read NTSC coded recordings A specification developed by Intel for protecting digital entertainment that uses the DVI interface HDCP encrypts content the transmission of digital content between the vi
44. improvements are made depends on the upgrade software you are using as well as the software your TV contained before the upgrade You can execute the software upgrade procedure yourself Be aware that the content of this document is addressing technical or software skilled users Preparing a portable memory for software upgrade For the procedure you will require e A personal computer with web browsing capability e An archive utility that supports the ZIP format e g WinZip for Windows or Stufflt for Mac OS e A preferably empty USB memory stick Note Only FAT DOS formatted portable memory is supported New software can be obtained from your dealer or can be downloaded from the www philips com usasupport website Go to www philips com usasupport using the web browser on your PC Follow the procedure to find the information and the software related to your Select the latest software upgrade file and download it to your PC Decompress the ZIP file and copy the file autorun upg to the root directory of the USB portable memory Note Only use software upgrades that can be found on the www philips com usasupport web site TV menu Installation Verifying the version of the TV software Language Chanel Before starting the software upgrade procedure it is advised to check what the RR aeaee current TV software is Connections Select Software Upgrade in the Installation menu Clock Press the cur
45. ings ee T 8 Select the menu language ss 17 To use the menus 9 Channel menu 17 MWh OUNCE ONE aa E eee nn es 9 Store TY channels cccucasosacessisceansanasaenssanaceavanntanecaanebanebsasadeasaiaianvaieanes 17 How to navigate through the TV menus 9 InSallationupdat 2 18 DO a anced 9 Weak channel installation e eooo ee oeoeennn oe oonono 18 Picture MENU esssseeesecceeeeeccccceeceecccceeceececcceeccecccceeceeccccceeceecee 10 SATA a an a Lu 18 CO ee ee ene een 10 Uninstall channels c ccccccccccccccoccecccccecccccccccccecccsceececcseccecsecsecceceeceeee 18 SE I SEMIS S ae ee on 10 Preferences MENU ccccccccccccccccccccccccccccccecccccccccccceccccccccccscoeece 18 C OO a 10 LOCAtION T 18 PR de E A E 10 Ee ETE TEAT E A ee AETA 19 S e E E a een 10 Show emergency alerts EAS 19 a Color C MID T 10 Download rating table eee 19 Custom color temperature 10 CGC CLIO tS une 20 SPICED PUS AA 10 Cine 20 Dynamic CONS Re noie 11 Auto clock MOUS ceccccccccecccccccccccccccucccceccsccccsecsecseceecsscsecsecsecceceeees 20 DNR Digital Noise Reduction 11 Auto clock channel A nant 20 MPEG altifaet r dUCtiOn s nn 11 B cT lt TTT 20 Color ENAANCSM NE nn A 11 r ZONE ed na lun 20 a Active Go OMEN Ol esp a a stekes raii 11 secant canes 20 s Picture T ed ee 11 Reset AV settings sssssssossssossssosssooesssessssoessscessssossssosssses 21 Souma KTT
46. l screens you are prompted to select your preferred picture sound and ambilight settings to finally arrive at a complete setting which satisfies you See First time installation p 5 Press the green color button to return to the TV menu again TV settings Settings assistant Settings assistant ard Reset to standard Start s s This allows you to reset your settings for viewing and listening to predefined factory settings Select Reset to standard and press the cursor right A menu appears which allows you to select one of the standard settings for viewing and listening Current shows your current settings for viewing and listening Natural allows you to set your picture and sound settings to the recommended standard values In most cases this will give the best balanced viewing experience Vivid allows you to set your picture and sound settings to rich values making use of the TV capabilities to its full extend Subtle allows you to set your picture and sound settings to the purest representation of the original source content TV settings Reset to standard Press the green color button to store the selected setting C To use the menus _ How to navigate through the TV menu The TV menu allows you to access and change settings and preferences e Press the MENU button on the remote control to summon the TV menu On the left panel the highlight can be set on a menu ite
47. ly tune to channel 3 or 4 Just change channels until picture appears Cable Signal IN from Cable Company O Connect cable box to TV using HDMI cable Note If the accessory device has DVI output only use a DVI to HDMI adapter cable to connect to the HDMI connector You need to also connect the audio Eadie eh able Bak cable to L and R AUDIO jacks Next go to Menu gt TV menu gt Installation gt Connections gt Audio in LIR gt AV1 DVD D OUT Using RF Cable Q Connect RF cable from wall to input at the back of the cable box Use second RF to connect the cable box to the TV s antenna input This connection gives mono sound For stereo sound use also composite audio video connection Refer to panel 3 HDMI Input 75Q Input Set Top Box to TV Next Source AV 1 Using Component Video Input Cable Signal IN PERE E ae Q Connect Component Video cable to input at back of the cable box pany O Turn on TV and DVD Player DVD recorder Press CH or CH on remote control to tune to the video supplied by AV2 m 5288 cD E Insert a prerecorded DVD into DVD player DVD recorder and press PLAY to verify correct connection OPTICAL SPDIF Back of Cable Box HDMI 1 AUDIO 0 DIGITAL 21 Progressive Scan DVD Player or DVD Recorder to TV Next Source ee Back of DVD Player Recorder Usi ng H D M l L 6
48. m with the cursor E up down ettings assistant lt i i i wa The right panel shows the content of the highlighted menu item in the left Reset to standard E Bez panel Picture Note Sometimes not all the menu items are visible on the screen Use the cursor a Sauni down to reveal all items Use the cursor right to enter the right panel The content of the right panel is moved to the left panel and the right panel shows the content of the newly highlighted item in the left panel Note In some cases it is important that the picture can be watched while adjusting the settings This means that when the highlight is on the right side panel the other menu items hide away When the cursor left is pressed again the hidden menu items re appear and the highlight moves to the left panel e Press the cursor left to go one menu level up again Press the OK button on the highlighted item to activate and to dismiss the menu Press the MENU button again to exit the Settings menu Note The menu is also dismissed by pressing one of the color buttons if present referring to certain actions which may be executed C Demo D Pixel Plus Ambilight The Demo menu allows the user to get an idea of the features that are part of the television Select Demo in the Features menu and press the cursor right Highlight a desired demo with the cursor up down Press OK to start playing the highlighted demo Press the red
49. mera and the TV isn t working you can try the solutions below to resolve your problem e Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct see the manual of your digital camera for more information e Some digital cameras allow you to switch off the USB interface Make sure that the USB interface is switched on before connecting to the TV e If you have a digital camera with only internal memory no removable memory you can try to copy the content manually to a a USB memory device e g Philips KEY product using a personal computer e Some digital cameras allow you to switch between PTP Picture Transfer Protocol or PC Link and USB Mass Storage or PC Drive Make sure that you select USB Mass Storage or PC Drive on your digital camera e If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera to find out the correct setting USB Memory Device Issues e Devices connected to the USB port of your TV must be Mass Storage Class compliant If your device digital camera MP3 player portable harddisk is not Mass Storage Class compliant it will not be detected by the content browser of the TV e The following subsets of the Mass Storage Class specification are supported The implementation of the TV is based on the Universal Serial Bus Mass Storage Class Specification Overview
50. n 8 and 4000 Ohm The headphone socket has a 3 5 mm jack In the Sound menu select Headphone volume to adjust the headphone volume Viewing content from a USB device Inserting a USB device Note USB devices are not supplied with this TV Insert a USB device in the USB connector at the side of the TV When a USB device is inserted the Multimedia browser menu is displayed automatically see further Removing the USB device First switch off the menu To do so navigate to the Multimedia browser menu and press the MENU button to exit the menu Remove the USB device C Digital Surround receiver_ Surround receiver Back of TV Connect a Digital MultiChannel Surround receiver to the AUDIO OUT DIGITAL connector at the bottom of the TV The TV can output Digital audio via the AUDIO OUT DIGITAL connector to an external amplifier or receiver If your amplifier or receiver has a matching connector for Digital Audio In you can connect it with a single cable to the TY s AUDIO OUT DIGITAL AUDIO OUT DIGITAL See Connect Accessory Devices p 22 23 Multimedia browser gt browser Multimedia browser lets you display pictures or play audio files stored on a Television TV menu _ Channel list Multimedia USBDevice UsBDevicel Pictures Picture London2005 Music The Beatles Xmas2004 alb arnold jpg eagle jpg Pictures London2005 Done i The Beatles Xmas2004 alb arnold jpg eagl
51. necessity e If an error occurs during the upgrade you should retry the procedure or contact your dealer When the software upgrade was successful remove the USB portable memory and restart your TV with the power switch at the right side of the TV Your TV will start up with the new software Note Once the upgrade is finished use your PC to remove the IV software from your USB portable memory Manual software upgrade procedure For a manual software upgrade copy the autorun upg file in a directory called Upgrades located in the root of the USB portable memory Insert the portable memory that contains the downloaded software upgrade The TV will automatically start the content browser menu Exit the menu by pressing the MENU key Select Software Upgrade in the Installation menu Go to Local upgrades The TV will list all compatible images available on the USB portable memory and display the data for each selected upgrade image Select the correct upgrade image and press the red color button to start the upgrade Your TV will restart and will automatically go to the upgrade mode After a few seconds it will display the status of the upgrade procedure Warning If you try to upgrade to a software version equal or lower than the current version a confirmation will be asked Downgrading to older software should only be done in case of real necessity When the software upgrade was successful remove the
52. ns gt Audio in LIR gt AVI Clock This allows you to use your TV as a clock Auto clock mode Select Clock in the TV menu Press the cursor right to select the Auto clock mode Press the cursor right to instruct the TV to get the time automatically or manually Auto clock channel only available when Auto clock mode is set to Automatic With the cursor buttons select the channel number where time can be found by the TV Typically time can be found on PBS as well as some other channels Note If Manual has been selected in the Auto clock mode the Auto clock channel menu item can not be selected Time Day only available when Auto clock mode is set to Manual With the cursor buttons select and enter the correct time and day lf Auto clock mode Manual has been selected and no clock search has been done the system will keep the entered time and day Time zone only available when Auto clock mode is set to Automatic This function allows you to select your local time zone Broadcasted time information will correct the clock display for your local time Select Time zone with the cursor down Press the cursor right to select your local time zone Daylight saving only available when Auto clock mode is set to Automatic Daylight saving time is automatically set by specially broadcasted signals This menu item allows you to disable the automatic setting of daylight saving time This is useful if you live in an a
53. ntrada de 75 Details refer to page 21 D tails consultez le page 21 Para detalles consulte la pag 21 AE Set Top Box to TV FR Bo tier de d codage AI r o Cable Signal IN vers televiseur from Cable Company s i H Signal de t l distribution ES De la caja DAS IRON d entr e IN du service du c ble O Caja de cable al TV A Entrada de se al de cable desde la compa ia de cable TO TV VCR DVD D OUT S VIDEO TV OPTICA PASSCARD SPDIF Back of Cable Box Arriere du bo tier de connaxion Parte posterior de la caja de cable TV T l viseur TV CABLE ANTENNA ale HDMI 1 Component Video Input Entr e vid o composant Entrada de video componente Details refer to page 21 D tails consultez le page 21 Para detalles consulte la pag 21 AE Progressive Scan DVD Player Recorder to TV FR Lecteur DVD Enregistreur DVD vers le t l viseur ES Del reproductor o grabador de DVD al TV me HDMI Details refer to page 22 D tails consultez le page 22 Para detalles consulte la pag 22 AE Progressive Scan DVD Player Recorder to TV FR Lecteur DVD ou Enregis treur vers le t l viseur Del reproductor o grabador de DVD al TV ES Component Video Input Entr e vid o composant Entrada de video componente Details refer to page 22 D tails consultez le page 22 Back of DVD
54. ore intense than other programs in the TV Y7 category TV G programs suitable for all ages These programs contain little or no violence no trong language and little or no sexual dialogue or situations TV PG programs contain elements that some parents may find unsuitable for younger children and which may need parental guidance The program may contain moderate violence sexual dialogue and or situations and some strong language TV 14 programs contain elements that may not be suitable for children under 14 years of age These programs include one or more of the following intense violence intense sexual situations suggestive dialogue and strong language TV MA programs are designed to be viewed by adults and may be unsuitable for children under the age of 17 These programs may contain graphic violence explicit sexual activity and or crude or indecent language 15 Child lock TV ratings lock All Movie ratings re Child lock Region ratings lock _ Please enter your PIN Region ratings me Movie ratings lock This function allows you to control access to individual movies based on their MPAA ratings Motion Picture Association of America Select Movie ratings lock with the cursor down Press the cursor right to enter the list Select a movie rating with the cursor up down Press OK to activate de activate the selected rating Each rating item has a box graphic in front of it to indicate whether or not progr
55. pressure is possible However at high altitudes or local air pressure equal or below 800 hPa the picture on this display may become unstable and picture performance can deteriorate In addition the plasma display may produce a humming sound in these conditions These possible adverse effects relate to the altitude and are common of all plasma displays Once the set is brought below aprox 6562 ft and or local air pressure equal or above 800 hPa its function will most likely return to normal Note Transportation at high altitudes has no negative effect on the set or picture performance How to dispose of batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations 27 C Glossary gt DVI Digital Visual Interface VGA Video Graphics Array RGB signals S VHS signals NICAM sound 16 9 HDMI High Definition Multi media Interface System HDCP High bandwidth Digital Content Protection YPbPr A digital interface standard created by the Digital Display Working Group DDWG to convert analog signals into digital signals to accommodate both analog and digital monitors a common standard graphics display system for PCs These are the three video signals Red Green Blue which make up the picture Using these signals improves p
56. rea or state where daylight saving is not applied but you receive channels from other areas where daylight saving signals are broadcasted Select Daylight saving with the cursor down Press the cursor right to select Automatic for automatic clock correction for daylight saving time based on specially broadcasted signals Select Off to disable automatic clock correction based on the specially broadcasted signals 20 Reset AV settings This function allows you to reset most of the picture and sound settings to their predefined factory states a Select Reset AV settings with the cursor down Reset Press the cursor right Press the OK button to erase settings and reset them to their default values Software upgrade This menu allows you to upgrade your TV software using a USB device USB upgrade It is possible to initiate an upgrade procedure from a USB portable memory The memory device must be filled with the appropriate upgrade image and structure which can be found on the www philips com usasupport website How to upload a new software version on your portable memory device see Annex 1 p 31 C Connect Accessory Devices _ Accessory Devices Set Top Box to TV Using HDMI Next Source Q Connect RF cable from wall to input at back of the cable box Set output switch on set top box to CH 3 or 4 and tune TV to same channel In some cases cable box will automatical
57. s menu Select Features in the TV menu Press the cursor right to enter the features menu Select the menu items with the cursor up down and adjust the settings with the cursor left right TY menu Features Closed captions Closed captions Features Caption service This displays the transmitted CC or CS text on the screen according to your Digital caption service chosen CC or CS service in the caption service This text can either be permanently displayed assuming that the service is available in the broadcast or Digital caption options Rs only when mute is active Sleeptimer Child lock Set PIN Select On Off or On during mute Press the cursor right after having selected Closed captions O _ On timer Caption service This allows you to select the Closed Captions service levels of analog broadcasting to be displayed Closed Captioning allows you to read the voice content of television programs on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in progress Captions will appear on the screen during captioned broadcasts Select Captions service Press the cursor right Select the desired Caption service CC1 2 3 0r 4 Dialogue and descriptions for the action on the captioned TV program shows on screen Usually CC 1 is the most used CC 2 may be used for alternate
58. s of 4 3 programs With minimal distortion When in Movie expand 14 9 Movie expand 16 9 or Super zoom picture format you can make subtitles visible with the cursor up down Note With HD sources not all screen formats will be available FAVORITES e VIEW To display a list of all channels marked as favorite incl subchannels oc vo No function CC Closed captions Select On or Off to activate de activate Closed captions See p 13 ACTIVE CONTROL The TV continues measures and corrects all incoming signals in order to provide the best picture possible Select On or Off to activate de activate Active control Control Buttons on the TV POWER CHANNEL omar MENU Should your remote be lost or broken you can still change some of the basic settings with the buttons on your TV Press the power switch to switch the TV on Press e the VOLUME button to adjust the volume e the CHANNEL buttons to select the TV channels or sources The MENU button can be used to summon the Settings menu without the remote control Use e the VOLUME buttons to select left right menu items and the CHANNEL buttons to select up down menu items VOLUME C TV settings gt Settings assistant PHILIPS a list Each time you have made a selection press the green color button to confirm your selection Select Settings assistant and press the cursor right Note By means of several split screens ful
59. slide_4_url lt slide gt lt slide gt slide_5_url lt slide gt lt slide gt slide_6_url lt slide gt lt slide gt slide_N 1_url lt slide gt lt slide gt slide_N_url lt slide gt lt slides gt lt philips slideshow gt 33 Supported XML tags The following table gives a description of the XML syntax abee e Beet ooo philips slideshow Philips slideshow signature including the version audio optional The audio URL following this tag will define the music playing in the background during the slideshow A single song or playlist m3u amp pls are the only valid audio references Other reference will not result in any audio playback If a single song is referenced the song will be repeated forever Ifa playlist is referenced the playlist will be played in sequence with a repeat at the end of the playlist Slap optional The default display time in 0 1 second of a slide The TV application isn t obliged to support this tag The TV application can force the use of one or multiple predefined display times Identifies the slides to show Identifies the URL of the individual slide Examples See on this CD in the directory Files Slideshw Copy the directory with the slideshow files to your portable memory lt xml version 1 0 encoding ISO 885h9 1 gt lt philips slideshow version 1 0 gt lt title gt Philips AlbumFile lt title gt lt qudio gt Music Nature mp3 l
60. sor right O Reset AV SCORE The Software Upgrade menu moves to the left panel Sof d _ ae Select Current Software Info to observe the version and the description of the we _ a Info 31 PHILIPS Software Upgrade Application Upgrade busy Software Id TL32E 234 Programming SE TV menu Installation Software upgrade Current software RS Software upgrade X 9 ettings Automatic software upgrade procedure For an automatic software upgrade copy the autorun upg file in the root directory of the USB portable memory Power off your TV and remove all memory devices Insert the USB portable memory that contains the downloaded software upgrade Switch on your TV with the power switch D at the right side of the TV At startup the TV will scan the USB portable memory until it finds the update content The TV will automatically go to the upgrade mode After a few seconds it will display the status of the upgrade procedure Warning e You are not allowed to remove the USB portable memory during the software upgrade procedure s In case of a power drop during the upgrade procedure don t remove the USB portable memory from the TV The TV will continue the upgrade as soon as the power comes back e If you try to upgrade to a software version lower than the current version a confirmation will be asked Downgrading to older software should only be done in case of real
61. t audio gt lt slide duration gt 50 lt slide duration gt lt slides gt lt slide gt lt slide gt lt slide gt lt sli mages mages mages mages mage01 jpg lt slide gt mage02jpg lt slide gt mage03jpg lt slide gt mage04 jpg lt slide gt mage05 jpg lt slide gt mage0 jpg lt s ide gt ide gt mac enre ide gt mage09 jpg lt slide gt mage10 jpg lt slide gt mage11 jpg lt slide gt mage 2 jpg lt slide gt Qa D V OD V a D N T7 S A A A a UO OQ OO OD D OD DM D nN nn WN 3 g UO O oS N Es UO A ie lt sli lt sli lt slide gt lt slide gt lt slide gt lt slides gt lt philips slideshow gt nS n n So o_ Ss _ Ss oS o_o Qa D V mages mages mages mages i 34 C Annex 3 Philips TV USB 3 Philips TV USB Notes The latest version of this document can be found on the Philips support website www philips com usasupport The software of your TV is upgradeable If you have problems first check if you have the latest software installed on your TV The latest software together with instructions can be found on the Philips support website Use the type number of your TV e g 32PFL7332D 37 to find this documentation and other related files Philips can t be held responsible neither for any errors in
62. t the menu item is set to Set PIN Follow the instructions on screen If a PIN code has previously been entered the menu item is set to Change PIN Follow the instructions on screen All number combinations from 0000 to 9999 are valid numbers The Menu preferences menu reappears with a message confirming that the PIN has been created 16 On timer From standby this automatically switches the TV to the specified channel number at a specified time Select On timer Press the cursor right to enter the On timer menu Select Timer and press the cursor right Select On Select Channel and then the TV channel you want your TV to switch to on a selected time and day Select Day and then a day of the week or select Daily Select Time and enter the time with the digit keys or with the cursor up down Press the OK key to activate Press the cursor left to return to the Features menu or press the MENU key to switch off the menu C Installation menu _ menu Select the menu language ae Press the MENU button on the remote control Channels Use the cursor down to select Installation in the TV menu Preferences Use the cursor right to enter the Installation menu Connections Select Language and enter the list of available languages with the cursor Clock right Reset AV setti eset NT Select your language with the cursor up down and press the OK button to Software
63. tening position Digital audio language only selectable with digital broadcast signals This allows you to select your language preference in case of multilingual audio track programs if available with digital broadcast signal Note The default language for the digital channels is the installed menu language Alternate audio only selectable with analog broadcast signals This gives you the possibility to swap between the Main and Second audio Program SAP when it is available Mono Stereo This selects per TV channel Mono or Stereo sound when analog stereo broadcasts are available Sound mode This selects the modes for stereo or surround sound reproduction dependent on the broadcast signals or signals from external inputs received Headphone volume This controls the level of sound through the headphones AVL Automatic Volume Leveler only available with analog broadcast and non Digital signals This automatically reduces the volume differences between channels and programs providing a more constant overall level This will also reduce the dynamics of sound Delta volume This allows you to correct for any permanent volume differences between TV channels or external sources Auto surround Sometimes the broadcaster transmits special signals for Surround sound encoded programs The TV automatically switches to the best surround sound mode when Auto surround is switched On 12 Features menu _ menu Feature
64. ter When the TV is not receiving any signal from the antenna cable the message CHANNEL NOT AVAILABLE will appear on the TV screen When no transmission is received from the broadcaster a BLANK SCREEN will appear on the TV screen Note The TV will go on to standby after 10 minutes Press the POWER button on the remote control to on the TV You will not be able to receive pay channels when using direct antenna cable connection to the television When the Set top box is connected to the television using coaxial cable it is necessary to auto program the television for the single channel 3 or 4 that the Set top box outputs and change the channels at the Set top Box using the set top remote control to view the program Refer to the manual for more details Note The newly installed channels maybe sorted in a different sequence on this TV Please key using the CH buttons to get to know the new channel Also you can use the OK key to see the list of channels When the Set top box is connected to the television using one of the AV connections AV 1 AV 2 HDMI 1 HDMI 2 select that input source using the Source button to view the programs and change the channels at the Set top Box using the set top box remote control to view the program Part 2 Settings assistant By means of several split screens full screens you are prompted to select your preferred picture and sound settings to finally arrive at a complete setting which sa
65. tereo sound to the TV if it is being broadcast by the O G station you are watching pn Cable box with RF IN OUT Set Top Box e Connect the incoming cable TV signal to the cable IN jack 4 on the back of the cable box e Connect a coaxial cable not supplied from the TO TV jack on the back of the cable box to the CABLE ANTENNA 75 0 r gt jack 2 at the bottom of the TV Note Your cable box may have a different label for the TO TV jack such as OUTPUT or OUT e Set the OUTPUT CH switch 3 of the cable box to CH 3 or 4 whichever is correct for your cable box then tune the TV to the corresponding channel Once tuned change channels at the cable box not the TV Note This connection will not supply stereo sound to the TV The reason is that the RF output on a cable box labeled TO TV OUT or OUTPUT for example will not send a stereo signal to the tuner VHF UHF input on a TV Cable box with A V outputs e Connect the incoming cable TV signal 4 to a signal splitter not supplied The signal splitter enables you to avoid having to use the TO TV jack on the back of the cable box This jack will not supply stereo sound to the TV Seep ee Note Your cable box may have a different label for the TO TV jack such as OUTPUT or OUT e Connect a coaxial cable not supplied to a connector on the signal splitter and to the CABLE ANTENNA 75 fr jack 2 on the TV e Connect another coaxial cable not supplied to a connector on
66. tions AVL not working AVL does not work when Nothing the input signal is AC3 AVL does not work when the DVD disk is not Dolb Digital encoded If your problem is not solved Telephone number Philips Customer Turn your TV off and then on again once Care Center 1 888 PHILIPS 744 5477 Please have the Model and Product number which you can find at Never attempt to repair a defective TV yourself the back of your television set ready before calling Check with your dealer or call a TV technician CTips D Care of the screen Do not touch push or rub or strike the screen with anything hard as this may scratch mar or damage the screen permanently Do not rub the screen with chemically treated cloths Do not touch the surface with bare hands or greasy cloth some cosmetics are detrimental to the screen Unplug the TV before cleaning the screen When the surface becomes dusty please wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol because they cause chemical damage Do not use liquid cleaners or aerosol cleaners Wipe off saliva or water drops as soon as possible Their long time contact with the screen causes deformations and color fading Plasma display characteristics This Plasma display is designed to be used at altitudes up to 6562 ft above sea level and or local air pressure equal or above 800 hPa Operating this set at higher altitude lower air
67. tisfies you Press the green color button on your remote control to enter the Settings assistant menu Select your Location with the cursor up down and press the green color button If you choose Shop it will skip the Settings assistant The TV parameters for Picture and Sound will then be set to predefined fixed settings Press the green color button again to proceed If you choose Home it will display the Settings assistant Use the cursor left right to each time select your preferred screen Press the green color button to each time confirm your selection and to jump to the following screen The following items will be presented sequentially In the header it is mentioned how many screens have been completed and how many screens there are in total The Settings assistant will step sequentially through the following settings Picture and Sound O Press the green color button once to store all the settings and to return to the TV installation menu Note When you skip or stop the Settings Assistant then the Standard settings Philips selected for you will be chosen O Press the red color button to finish the First time installation procedure and to display the first stored TV channel Use of the remote control Note For most buttons pressing a button once will activate the function Pressing a second time will de activate it When a button enables multiple options a small list will be shown Press repeatedly to select the n
68. tores de audio derecho rojo e izquierdo blanco de AV1 del TV a los conec tores de salida de audio del dispositivo Mejor Entrada de video componente Proporciona calidad de imagen superior al separar las se ales de luminancia verde azul y roja Se usa normalmente con cables de audio rojo blanco Nota La entrada de video componente se muestra en el panel de conexi n como YPbPr Buena S Video Brinda una mejor imagen que las con exiones RF y compuestas Se usa con cables de audio rojo blanco Basica Audio Video Compuesto Cables de video amarillo y audio rojo blanco que proporcionan una conexi n b sica de la caja de cable y otros dispositivos Nota El color de las entradas de audio puede diferir por ej rojo blanco o rojo negro Buena Cable RF Antena Cable Digital Basica Cable RF Antena Cable An logo Proporciona una conexi n de antena o cable b sica AE Set Top Box to TV Cable Signal IN vers t l viseur Signal de t l distribution l d entr e IN du service du c ble ES De la caja superior Entrada de se al de cable o caja de cable al TV desde la compa ia de cable Back of Cable Box Arriere du bo tier de connaxion Parte posterior de la caja de cable a Ge SPDIF N our i HDMI T i RES OR OU O A T l viseur HDMI Input RF 75Q Input TV Entr e HDMI Entr e 75Q Entrada HDMI E
69. upgrade confirm you selection Proceed with the Installation menu Store TV channels Bee E Select Channels in the Installation menu Autoprogram LR update Use the cursor right to enter the Channels menu m Weak chana Select Autoprogram in the Channels menu Installation mode Use the cursor right to enter the Autoprogram menu Uninstall channels O Press the OK button Select Cable or Antenna in the Installation mode When Antenna is selected the TV will detect antenna signals and will search for antenna TV NTSC and ATSC channels available in your local area When Cable is selected the TV will detect cable company supplied signals and will search for cable TV NTSC ATSC QAM modulated channels available in your area Make sure that registration with your cable TV provider and connection of equipment are completed Press the green button Next on the remote control Note All channels must be unlocked in order to autoprogram If requested enter your PIN code to unlock all channels See Set Change PIN p 17 G Press the green button Start to start autoprogramming The menu screen disappears and the progress of autoprogramming is displayed The progress bar indicates the number of analog and digital TV channels found When Autoprogramming is complete a message appears confirming the completion Press the red button Finish and the TV returns to the Installation menu 17
70. v1 2 June 23 2003 including all documents referenced by the document The document can be found on the USB standardisation website www usb org Full support of the USB Mass Storage Class Bulk Only Transport blnterfaceProtocol 50h Full support of SubClass Code 05h SFF 8070i spec Full support of SubClass Code 06h SCSI transparent command set e For large USB memory devices when you are in the Content Browser it may take a long time before you can access your files e When using a USB portable harddisk Due to the high power consumption of the harddisk it is advised to use the external power supply of the portable harddisk to guarantee proper working under all conditions 35 PHILIPS Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2005 Koninklijke Philips Electronics N V All rights reserved www philips com 5 3139 125 37763
71. water The equipment shall not be exposed to dripping or splashing Mounting the TV on the wall This TV is compatible with the VESA wall mounting standard Please contact your local electronics retailer for a VESA compliant bracket to wall mount this TV Basic connections to the TV Your integrated digital TV automatically decodes and displays the four basic DTV picture resolution standards SDTV Standard Definition TV are broadcast as 480i 480 line interlaced or 480p 480 line progressive scan video CABLE HDTV High Definition TV are broadcast either in the 1080i or 720p formats FS always with a widescreen picture Note Progressive scan video p is more like that you see in a movie theater Images are much more distinct and free of flicker and motion is smoother a Next to analog NTSC broadcast reception your TV has an integrated High r Definition TV tuner which receives decodes and displays terrestrial ATSC and unscrambled cable QAM signals HDTV quality is only reproduced when a broadcaster or cable provider broadcasts HDTV signals There are 2 ways to get HDTV content via cable via antenna KR Note This drawing is used wherever you can connect cable or antenna CABLE Cable TV Connect the cable TV signal to the CABLE ANTENNA 75 A jack at the bottom of the TV See page 18 for details on using Autoprogram to store channels in the TV s memory Note this connection will supply s
72. with this for TV Use a USB device which is less than 25mm wide for best connection Function buttons at the bottom of the screen Details to display a description of the selected file or directory Transitions to select if a transition during a slide show should be applied Slide time to select the duration a picture will be displayed in a slide show Rotate to rotate a picture Repeat one all to repeat the playback of a music file Shuffle to shuffle music collections in a random way 24 Record with your recorder Record a TV program You can record a TV program using your recorders tuner without affecting your TV Select the channel number on your recorder Set your recorder to record See the handbook for your recorder Switching channel numbers on your TV does not disturb recording To select connected devices 1 29 G Press the SOURCE button repeatedly or select Connections in the GEE Settings menu see p 21 to select AV1 AV2 HDMI 1 HDMI 2 Side or TV according to where you connected your devices DEES ECE Press the cursor up down am C0 Ca Press OK PHILIPS TELEViSiON S E fr Kensington Security Slot if present Your TV is equipped with a Kensington Security Slot to prevent it from getting stolen An anti theft Kensington lock has to be purchased separately The Kensington lock is a plastic coated steel cable with a lock One end has to

Download Pdf Manuals

Related Search

Related Contents

65-80000-509 - Powerbank - RP-PB17 - User Manual  Klipsch S3m  LARUCP Energy Conservation Plan check List  Modular emergency or weather alert interface system  Samsung Galaxy Tab  

Copyright © All rights reserved. Failed to retrieve file