Philips FWC139 Mini Hi-Fi System
Contents
1. Tape playback Adjust the source selector to select TAPE source gt Display shows TUNER throughout tape operation Press STOP OPEN to open the tape door Insert a recorded tape and close the tape door gt Load the tape with the open side downward and the full spool to the left Press PLAY P to start playback To pause press PAUSE Press again to resume Press REW 44 or F FWD P to fast wind tape in either direction To stop the tape press Notes During playback the keys are automatically released at the end of a tape switch off the set press STANDBY ON During fast forwarding rewinding the keys will not be released at the end of a tape stop fast winding press STOP OPEN Tape Operation Recording General information on recording Recording is permissible insofar as copyright or other rights of third parties are not infringed For recording use only NORMAL IEC type tapes on which the tabs have not yet been broken This deck is not suited for recording on METAL IEC IV type tapes The best recording level is set automatically Altering the VOLUME or DBB controls will not affect the recording in progress The recording sound quality might differ depending on the quality of your recording source and the recording t2. Setting the clock In any mode press CLOCK TIMER twice gt The clock digits for the hours flash Press SEARCH I 4 gt gt 14 0 on the remote to set the hours Press CLOCK TIMER again gt The clock digits for the minutes flash Press SEARCH 144 gt gt 4 gt on the remote to set the minutes Press CLOCK TIMER to confirm the time Note If the clock has not been set will be displayed Setting the timer The system can be used as an alarm clock CD or TUNER can be set to switch on at a preset time The clock time needs to be set first before the timer can be used If no button is pressed within 90 seconds during timer setup the system will exit timer setting mode automatically In standby mode press CLOCK TIMER for more than 2 seconds Press SEARCH I 4 gt gt 14 0 on the remote to set the hours Press CLOCK TIMER again gt The clock digits for the minutes flash Press SEARCH 4 PPI 4 gt on the remote to set the minutes Press CLOCK TIMER to confirm the time gt The timer is now set and actiated Activating and deactivating TIMER In standby or during playback press TIMER ON OFF once gt Display shows 6 if activated and disappears if deactivated 17 Clock Timer Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time Press SLEEP on the remote co
3. to start playback Finding a passage within a track Press and hold down SEARCH 4 or press 44 on the remote gt The disc is played at high speed and low volume When you find the passage you want release 44 or PP or press 44 on the remote gt Normal playback continues CD Operation Different play modes SHUFFLE and REPEAT You can select and change the various play modes before or during playback REPEAT plays the current track continuously REPEAT ALL repeats the entire disc programme SHUF tracks of the entire disc are played in random order SHUF and REPEAT ALL repeats the entire disc programme continuously in random order To select your play mode press SHUFFLE or REPEAT on the remote control before or during playback until the display shows the desired function Press PII to start playback if in the STOP position gt If you have selected SHUFFLE playback starts automatically To return to normal playback press SHUFFLE or REPEAT on the remote control until the various SHUFFLE REPEAT modes are no longer displayed You can also press STOP to cancel your play mode Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence If you like store any track more than once Up to 20 tracks can be stored in the memory Press PROGRAM PROG on the remote to enter the programming mode Use
4. for clock timer adjusts the hours and minuts for clock timer functions for CDs fast searches back and forward within a track CD m PHILIPS TUNING IMPORTANT Before you operate the system complete the preparation procedures Switching the system on Press STANDBY ON gt The system will switch to the last selected source To switch the system to standby mode Press STANDBY ON gt The volume level up to a maximum volume level of 31 interactive sound settings last selected source and tuner presets will be retained in the player s memory Power saving automatic standby The power saving feature automatically switches to standby 30 minutes after a tape or CD playback has ended and no control is operated Adjusting volume and sound Press VOLUME AY to increase or decrease volume gt Display shows the volume level Z a4 anda number from 0 31 Basic Functions Press DBB to switch bass enhancement on or off gt Display shows DBB if the DBB is activated AC A Press DSC repeatedy to repeatedly to select the desired sound effect CLASSIC JAZZ POP or ROCK Press MUTE on the remote control to stop sound play back instantly gt Playback will continue without sound and the display shows MUTE To start sound playback you can press MUTE again adjust the volume controls
5. 11 CD Operation 12 PHILIPS MAS139 IMPORTANT The lens of the CD player should never be touched Playing a disc This CD player plays Audio Discs including CD Recordables and CD Rewritables CD ROM CD I CDV VCD DVD or computer CDs however are not possible Adjust the source selector to select CD source Press OPEN CLOSE on the system to open the CD compartment PEE LHP ET is displayed when you open the CD compartment Insert a disc with the printed side facing up and press down on OPEN CLOSE to close the CD door gt d is displayed as the CD player scans he contents of a disc The total number of racks and the total playing time are also shown Press to start playback gt Current track number followed by elapsed playing time of the track are displayed during disc playback To pause playback press PIL Press again to resume play gt Display The current track number and elapased time flash when playback is paused To stop disc playback press STOP Note CD playback will also stop when the CD door is opened the disc has reached the end you select another source TAPE TUNER you select standby Selecting a different track Press SEARCH M lt or BPI 14 0 on the remote once or repeatedly until the desired track number appears in the display Press
6. specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment The making of unauthorized copies of copy protected material including computer programmes files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes Be responsible Respect copyrights General Information Safety Information Before operating the system check that the operating voltage indicated on the typeplate or the voltage indication beside the voltage selector of your system is identical with the voltage of your local power supply If not please consult your dealer Place the system on flat hard and stab surface Place the system in a location with adequate ventilation to prevent internal heat build up in your system Allow at least 10 cm 4 inches clearance from the rear and the top of the unit and 5 cm 2 inches from each side The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc Do not expose the system batteries or discs to excessive moisture rain sand or heat sources caused by heating equipment or direct sunlight No naked flame sources such as lighted candles should be placed on the apparatus No objects filled with liquids such as vases shall be placed on the apparat
7. Playing etre Selecting a different track Finding a passage within a track E Different play modes Shuffle and Repeat 13 Programming track numbers H Reviewing the programme Erasing the programme sss Radio Reception Tuning to radio stations sss 14 Tape Operation Recording Tape playback General information on recording Synchro start CD recording Recording from the radio 15 16 Clock Timer Setting the clock Setting the timer 17 Activating and deactivating TIMER 17 Activating and deactivating SLEEP 18 Specifications 18 Troubleshooting 19 20 IMPORTANT PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY FOR COUNTRIES THAT OPERATE AT 110V 127V PLEASE ADJUST TO 110V 127V BEFORE YOU SWITCH ON THE SYSTEM Supplied accessories 2 speaker boxes remote control Environmental Information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a
8. SEARCH MAPP 4 on remote to select your desired track number gt The selected track number and PROG flash on the display panel Press PROGRAM PROG on the remote control to confirm the track number to be stored Repeat steps 2 3 to select and store all desired tracks To start playback of your disc programme press Pil Note If you wish you can add further tracks to your current program Make sure you are in the STOP position and that you have not exceeded 20 tracks Erasing the programme You can erase the programme by pressing STOP once in the STOP mode pressing STOP twice during playback opening the CD compartment selecting another sound source PROG disappears from the display 13 Radio Reception 14 PHILIPS Tuning to radio stations Adjust the source selector to select TUNER source gt WER is displayed Adjust the band selector to select your waveband MW FM mono or FMST stereo Adjust the TUNING control knob to tune to a desired radio frequency Note The system is equipped with a built in MW antenna and a fixed FM antenna For optimal MW reception adjust the position of the whole set until the strongest signal is found For optimal FM reception fully extend and adjust the position of the FM antenna until the strongest signal is found ud
9. previous next track fast searches back and forward within a track CD for clock timer adjusts the hours and minutes for clock timer functions D Source selector CD TAPE TUNER selects the respective sound source for CD TAPE TUNER CLOCK TIMER sets the clock or timer function 9 Band selector MW FM FMST selects waveband MW FM mono or FM stereo OPEN CLOSE open close the CD door 17 STOP for CD stops CD playback or erase a CD program 2 TUNING tunes to a radio station 3 DISPLAY display the current time DBB Dynamic Bass Boost enhances the bass 5 VOLUME A Y adjusts the volume level 10 N connect headphones Kg Tape Deck Operation starts recording starts playback REW 4 F FWD gt gt fast rewinds forwards the tape STOP OPEN stops the tape opens the tape compartment PAUSE II pauses recording or playback REPEAT for CD repeats a track CD programme entire CD SHUFFLE for CD sacs plays CD tracks in random order SLEEP activates deactivates or selects the sleeper time MUTE switches playback sound off and on 02 TIMER ON OFF activates deactivates the timer 3 DSC Digital Sound Control selects sound characteristics CLASSIC JAZZ POP ROCK m gt for CD skips to the beginning of a current track previous next track
10. HT and left speaker to LEFT coloured marked wire to and black unmarked wire to Fully insert the stripped portion of the speaker wire into the terminal as shown as Notes For optimal sound performance use the supplied speakers Do not connect more than one speaker to any one pair of speaker terminals Do not connect speakers with an impedance lower than the speakers supplied Please refer to the SPECIFICATIONS section of this manual Preparations Inserting batteries into the remote control Insert two batteries type RO3 or AAA into the remote control with the correct polarity as indicated by the and symbols inside the battery compartment CAUTION Remove batteries if they are exhausted or will not be used for a long time Do not use old and new or different types of batteries in combination Batteries contain chemical substances so they should be disposed of properly Controls illustrations on page 3 Controls on the system and remote control 1 LCD Display shows the status of the system 2 iR SENSOR infrared sensor for remote control 3 PROGRAM PROG for CD programs tracks and reviews the program 4 STANDBY ON switches the system to standby on 5 for CD duca starts or pauses CD playback 6 SEARCH 4 gt gt for C aes skips to the beginning of a current track
11. Mini Hi Fi System FWC139 User manual 5 PHILIPS PHILIPS ME ME CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation ATENCION uso de mando o ajustes o la ejecucci n de m todos que no sean los aqu descritos puede ocasionar peligro de exposici n a radiaci n 4 English Contents General Information Environmental information Supplied accessories Safety information Preparation Rear connections 8 Inserting batteries into the remote control 9 Controls Controls on the system and remote Control ooo eseeesseesstessesssesssesssesssessseesseesseesssesssesseessee 10 Basic Functions Switching the system uti Power saving automatic standby Adjusting volume and sound CD Operation
12. ape At the very beginning and end of the tape no recording will take place during the 7 seconds when the leader tape passes the recorder heads To protect a tape from accidental erasure have the tape in front of you and break out the left tab Recording on this side is no longer possible f however you wish to record over this side again cover the tabs with a piece of adhesive tape Synchro start CD recording Adjust the source selector to select CD source Insert a disc and if desired programme track numbers Press STOP OPEN to open the tape door Insert a suitable tape into the deck and close the tape door Press RECORD to start recording gt Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds It is not necessary to start the CD player separately 15 Tape Operation Recording To select and record a particular passage within a CD track Press and hold down on REW 44 or gt gt Release the control when you recognize the passage you want To interrupt CD playback press PHI Recording starts from this exact point in the track when you press RECORD To pause press PAUSE Press again to resume To stop recording press STOP OPEN Maintenance 16 Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasives Cleaning Disc
13. ere is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or service centre Problem Solution CD OPERATION aa oa is displayed Insert a disc Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc see Maintenance Use a finalised CD RW or CD R RADIO RECEPTION Radio reception is poor Increase the distance between the Micro HiFi System and your TV or VCR TAPE OPERATION RECORDING Recording or playback cannot be made Clean deck parts see Maintenance Use only normal IEC 1 tape for recording Apply a piece of adhesive tape over the missing tab space GENERAL The system does not react when buttons Remove and reconnect the AC power plug and are pressed switch on the system again Sound cannot be heard or is of poor Adjust the volume quality Disconnect the headphones Check that the speakers are connected correctly Check if the stripped speaker wire is clamped The left and right sound outputs are Check the speaker connections and location reversed 19 Troubleshooting 20 The remote control does not function Reduce the distance between the remote control and the system Inser
14. ntrol repeatly to select desired time before system shuts off gt Display shows SLEEP and series of time options for selection 120 90 50 45 30 Is OFF To deactivate press SLEEP on the remote control once or more until GFF is shown or press STANDBY ON on the system or remote control Specifications 18 AMPLIFIER Output power 2x15W RMS viec ae 1200W PMPO Signal to noise ratio s s 62 dBA IEC Frequency response 63 16000 Hz 3 dB Impedance loudspeakers nese 8 Impedance headphones 32 Q 1000 Q CD PLAYER Frequency range 63 16000 Hz Signal to noise 65 ABA TUNER FM wave range 87 5 108 MHz MW wave range 530 1700 kHz TAPE DECK Frequency response Normal tape type I 125 8000 Hz 8 dB Signal to noise ratio Normal tape type Wow and flutter 35 dBA 0 4 DIN SPEAKERS Bass reflex system Dimensions w x h x d 190 x 292 x 182 mm GENERAL INFORMATION AC 110 127 220 240V E 50 60 Hz Switchable Dimensions w x h x d 220 x 292 x 285 mm Weight with without speakers ees 4 9 2 3 kg Subject to modification Troubleshooting WARNING Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as th
15. s When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the centre out Do not use solvents such as benzene thinner commercially available cleaners or antistatic spray intended for analogue records Cleaning the disc lens After prolonged use dirt or dust may accumulate at the disc lens To ensure good playback quality clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner Follow the instructions supplied with cleaner Recording from the radio Tune to the desired radio station see Tuning to radio stations Press STOP OPEN to open the tape door Insert a suitable tape into the deck and close the tape door Press RECORD to start recording To pause press PAUSE Press again to resume To stop recording press STOP OPEN Cleaning the Heads and the Tape Paths To ensure good recording and playback quality clean the heads the capstan s and pressure roller s after every 50 hours of tape operation Use a cotton swab slightly moistened with cleaning fluid or alcohol You can also clean the heads by playing a cleaning tape once Demagnetising the heads Use a demagnetising tape available at your dealer PHILIPS Clock Timer PROG SHUFFLE cloceTIMER STOP bad VOLUME lt 4 S
16. t the batteries with their polarities signs aligned as indicated Replace the batteries Point the remote control directly toward IR sensor on the front of the system The timer is not working Set the clock correctly Press TIMER ON OFF to switch on the timer If a recording is in progress stop the recording The Clock Timer setting is erased Power has been interrupted or the power cord has been disconnected Reset the clock timer
17. us If the system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens of the disc unit inside the system Should this occur the CD player would not operate normally Leave the power on for about one hour with no disc in the system until normal playback is possible The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated When the system is switched to Standby mode it is still consuming some power To disconnect the system from the power supply completely remove the AC power plug from the wall socket e Preparations speaker right speaker left o Rear connections The type plate is located at the back of the system Power Before connecting the AC power cord to the wall outlet ensure that all other connections have been made If your system is equipped with a Voltage Selector set the VOLTAGE SELECTOR to the local power line voltage WARNING For optimal performance use only the original power cable Never make or change any connections with the power switched on Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS terminals right speaker to RIG
Download Pdf Manuals
Related Search