L S 2 1 0 0 S e r i e s
Contents
1. Scan Scan Beam Beam ES Bar Code Bar Code Bar Code Scan the Entire Symbol e The scan beam must cross every bar and space on the symbol as in the left bar code below e The larger the symbol the farther away you should hold the scanner e Hold the scanner closer for symbols with bars that are close together Right Wrong 012345 MANA What Does The Beep Mean When you hear 1 beep short high tone it means data has been decoded successfully If any other beeps are heard contact the technical person in charge of scanning Troubleshooting If the scanner does not work after you ve followed these operating instructions e Check the system power e Check for loose cable connections e Be sure the scanning system is programmed to read the type of bar code you are trying to scan e Check to be sure the symbol is not defaced Cleaning Note LS 2100 series scanners require no user maintenance Wipe the scanner window periodically with a lens tissue or other material suitable for cleaning optical material such as eyeglasses Caution Do not pour spray or spill any liquid on the scanner Quick Reference Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the user s authority2. ii in which the defects or damage to the Product result from normal wear and tear misuse negligence improper storage water or other liquids battery leakage or failure to perform operator handling and scheduled maintenance instructions supplied by Seller iii which has been subjected to unusual physical or electrical stress abuse or accident or forces or exposure beyond normal use within the specified operational and environmental parameters set forth in the applicable Product specification nor shall the above warranty provisions apply to any expendable or consumable items such as batteries supplied with the Product EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE SELLER DISCLAIMS ALL WARRANTIES ON PRODUCTS FURNISHED HERUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABLILTY AND FITNESS FOR A PARTICULAR USE ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS IN SUCH STATES OR COUNTIRES FOR SUCH PRODUCTS SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages including but not limited to special indirect or consequential damages arising out of or in connect
3. to operate the equipment Ergonomic Recommendations Caution In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below Consult with your local Health amp Safety Manager to ensure that you are adhering to your company s safety programs to prevent employee injury e Reduce or eliminate repetitive motion e Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures AN Laser Devices Symbol devices using lasers comply with US 21CFR1040 10 and IEC825 1 1993 EN60825 1 19944 A11 1996 The laser classification is marked on one of the labels on the device Class 1 Laser devices are not considered to be hazardous when used for their intended purpose The following statement is required to comply with US and international regulations Caution Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure Class 2 laser scanners use a low power visible light diode As with any very bright light source such as the sun the user should avoid staring directly into the light beam Momentary exposure to a Class 2 laser is not known to be harmful
4. 148 5 168 149 5 180 904 5 216 232 5 229 591 5 230 088 5 235 167 5 243 655 5 247 162 5 250 791 5 250 792 5 260 553 5 262 627 5 262 628 5 266 787 5 278 398 5 280 162 5 280 163 5 280 164 5 280 498 5 304 786 5 304 788 5 306 900 5 324 924 5 337 361 5 367 151 5 373 148 5 378 882 5 396 053 5 396 055 5 399 846 5 408 081 5 410 139 5 410 140 5 412 198 5 418 812 5 420 411 5 436 440 5 444 231 5 449 891 5 449 893 5 468 949 5 471 042 5 478 998 5 479 000 5 479 002 5 479 441 5 504 322 5 519 577 5 528 621 5 532 469 5 543 610 5 545 889 5 552 592 5 557 093 5 578 810 5 581 070 5 589 679 5 589 680 5 608 202 5 612 531 5 619 028 5 627 359 5 637 852 5 664 229 5 668 803 5 675 139 5 693 929 5 698 835 5 705 800 5 714 746 5 723 851 5 734 152 5 734 153 5 742 043 5 745 794 5 754 587 5 762 516 5 763 863 5 767 500 5 789 728 5 789 731 5 808 287 5 811 785 5 811 787 5 815 811 5 821 519 5 821 520 5 823 812 5 828 050 5 848 064 5 850 078 5 861 615 5 874 720 5 875 415 5 900 617 5 902 989 5 907 146 5 912 450 5 914 478 5 917 173 5 920 059 5 923 025 5 929 420 5 945 658 5 945 659 5 946 194 5 959 285 6 002 918 6 021 947 6 029 894 6 031 830 6 036 098 6 047 892 6 050 491 6 053 413 6 056 200 6 065 678 6 067 297 6 082 621 6 084 528 6 088 482 6 092 725 6 101 483 6 102 293 6 104 620 6 114 712 6 115 678 6 119 944 6 123 265 6 131 814 6 138 180 6 142 379 6 172 478 6 176 428 6 17
5. 8 426 6 186 400 6 188 681 6 209 788 6 209 789 6 216 951 6 220 514 6 243 447 6 244 513 6 247 647 6 308 061 6 250 551 6 295 031 6 308 061 6 308 892 6 321 990 6 328 213 6 330 244 6 336 587 6 340 114 6 340 115 6 340 119 6 348 773 6 380 949 6 394 355 D305 885 D341 584 D344 501 D359 483 D362 453 D363 700 D363 918 D370 478 D383 124 D391 250 D405 077 D406 581 D414 171 D414 172 D418 500 D419 548 D423 468 D424 035 D430 158 D430 159 D431 562 D436 104 Invention No 55 358 62 539 69 060 69 187 NI 068564 Taiwan No 1 601 796 1 907 875 1 955 269 Japan European Patent 367 299 414 281 367 300 367 298 UK 2 072 832 France 81 03938 Italy 1 138 713 rev 06 02 Quick Reference Introduction The LS 2100 Series scanners are lightweight laser scanners which combine the best in basic scanning performance and value The 2100 series is made up of three versions of the scanner which differ in their host interface capability The three versions are as follows e LS 2100 the undecoded version e LS 2104 the RS 232 and Synapse version e LS 2106 the Keyboard Wedge and Synapse version This Quick Reference Guide provides basic instruction on the set up and use of the scanner Unless otherwise noted the term LS 21xx refers to all versions of the scanner Setting up the LS 2Ixx To set up the scanner you must first attach the interface cable to the bottom of the scanner ensu
6. LASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN NORSK KLASSE 1 LASERPRODUKT KLASSE 1 KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRALEN LASERPRODUKT KLASSE 2 PORTUGUESE PORTUGUES CLASSE 1 PRODUTO LASER DA CLASSE 1 CLASSE 2 LUZ DE LASER NAO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 SPANISH ESPANOL CLASE 1 PRODUCTO LASER DE LA CLASE 1 CLASE 2 LUZ LASER NO MIRE FIJAMENTE EL HAZ PRODUCTO LASER DE LA CLASE 2 SWEDISH SVENSKA KLASS 1 LASERPRODUKT KLASS 1 KLASS 2 LASERLJUS STIRRA INTE MOT STRALEN LASERPRODUKT KLASS 2 Power Supply Note Use only a Symbol approved power supply 50 04000 083 output rated 5Vdc and minimum 1 A The power supply is certified to EN60950 with SELV outputs Hinweis Benutzen Sie nur eine Symbol Technologies genehmigt Stromversorgung 50 04000 083 in den Ausgabe 5 Vdc und minimum 1 A Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben Radio Frequency Interference Requirements Tested to comply with FCC Standards FOR HOME OR OFFICE USE Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the
7. Scanner Labeling LASER LIGHT DO NOT STARE mo BEAM Sete 6B0nm 1 0m CLASS 11 LASER TUNG ASESTINLLASERLASSE 2 MONT IN DEN ia LIEN LIERE Las PAREIL CAUTION LASER LIONI 0O MOT STARE INTO BENI ic CLASS 2 LASER PRODUCT 630nm 680rM 1 0 nil LASER IEC CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 KLASSF 1 LASER IEC 825 1 1993 EN60825 1 1994 The scanner will also be marked with the following certification label Laser Bar Code Scanner 9B97 UL c 2 us Listed Accessory ITE Quick Refe rence In accordance with Clause 5 IEC 825 and EN60825 the following information is provided to the user ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF SE IKKE IND I STRALEN KLASSE 2 LASERPRODUKT DUTCH NEDERLANDS KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLICHT NIET IN STRAAL STAREN KLASSE 2 LASERPRODUKT FINNISH SUOMI LUOKKA 1 LUOKKA 1 LASERTUOTE LUOKKA 2 LASERVALO L TUIJOTA S DETT LUOKKA 2 LASERTUOTE FRENCH FRAN AIS CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASSE 2 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 GERMAN DEUTCH KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASSE 2 LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 HEBREW 1nnr 19 AsV inn RDI DN 2mm DUN DN IN WINI pr 27107 19 AV ITALIAN ITALIANO C
8. Ss 2 1 0 0 S er i eos symbol 1998 2002 SYMBOL TECHNOLOGIES INC All rights reserved Symbol reserves the right to make changes to any product to improve reliability function or design Symbol does not assume any product liability arising out of or in connection with the application or use of any product circuit or application described herein No license is granted either expressly or by implication estoppel or otherwise under any patent right or patent covering or relating to any combination system apparatus machine material method or process in which Symbol products might be used An implied license exists only for equipment circuits and subsystems contained in Symbol products Symbol and the Symbol logo are registered trademarks of Symbol Technologies Inc Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged Symbol Technologies Inc One Symbol Plaza Holtsville N Y 11742 1300 http www symbol com Patents This product is covered by one or more of the following U S and foreign Patents USS Patent No 4 593 186 4 603 262 4 607 156 4 652 750 4 673 805 4 736 095 4 758 717 4 760 248 4 806 742 4 816 660 4 845 350 4 896 026 4 897 532 4 923 281 4 933 538 4 992 717 5 015 833 5 017 765 5 021 641 5 029 183 5 047 617 5 103 461 5 113 445 5 130 520 5 140 144 5 142 550 5 149 950 5 157 687 5 168
9. instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Radio Frequency Interference Requirements Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Statement of Compliance Symbol Technologies Inc hereby declares that this device is in compliance with all the applicable Directives 89 336 EEC 73 23 EEC A Declaration of Conformity may be obtained from http www2 symbol com doc Quick Reference Warranty A Seller s hardware Products are warranted against defects in workmanship and materials for a period of twelve 12 months from the date of shipment provided the Product remains unmodified and is operated under normal and proper conditions Warranty provisions and durations on software integrated insta
10. ion with the use or performance of the Product or service Seller s liability for damages to Buyer or others resulting from the use of any Product or service furnished hereunder shall in no way exceed the purchase price of said Product or the fair market value of said service except in instances of injury to persons or property Service Information Before you use the unit it must be configured to operate in your facility s network and run your applications If you have a problem running your unit or using your equipment contact your facility s Technical or Systems Support If there is a problem with the equipment they will contact the Symbol Support Center United States 1 800 653 5350 Canada 905 629 7226 1 631 738 2400 United Kingdom 0800 328 2424 Asia Pacific 337 6588 Australia 1 800 672 906 Austria Osterreich 1 505 5794 0 Denmark Danmark 7020 1718 Finland Suomi 9 5407 580 France 01 40 96 52 21 Germany Deutchland 6074 49020 Italy Italia 2 484441 Mexico M xico 5 520 1835 Netherlands Nederland 315 271700 Norway Norge 47 2232 4375 South Africa 11 8095311 Spain Espafia 91 324 4000 Inside Spain Sweden Sverige 84452900 34 91 324 40 00 Outside Spain Latin America 1 800 347 0178 Inside US Sales Support 1 561 483 1275 Outside US Europe Mid East Contact local distributor or call Distributor Operations 44 118 945 7360 Customer support is available 24 hours a day 7 days a week For the latest version of this guide go to ht
11. lled systems Product modified or designed to meet specific customer specifications Custom Products remanufactured products and reconditioned or upgraded products shall be as provided in the applicable Product specification in effect at the time of purchase or in the accompanying software license B Products may be serviced or manufactured with parts components or subassemblies that originate from returned products and that have been tested as meeting applicable specifications for equivalent new material and Products The sole obligation of Seller for defective hardware Products is limited to repair or replacement at Seller s option on a return to service depot basis with prior Seller authorization Shipment to and from Seller will be at Seller s expense unless no defect is found No charge will be made to Buyer for replacement parts for warranty repairs Seller is not responsible for any damage to or loss of any software programs data or removable data storage media or the restoration or reinstallation of any software programs or data other than the software if any installed by Seller during manufacture of the Product The aforementioned provisions do not extend the original warranty period of any Product that had either been repaired or replaced by Seller C The above warranty provisions shall not apply to any Product i which has been repaired tampered with altered or modified except by Seller s authorized service personnel
12. ring that the connection is secure p Scanning with the LS 21 xx Before you can use the scanner it should have already been installed and programmed If not consult the appropriate LS 21xx Product Reference Guide for your specific scanner If you need assistance contact your local supplier or Symbol Technologies 1 Before you use the scanner make sure all cable connections are secure 2 Aim the scanner away from you Press the trigger the scan beam lights and an orange light illuminates at the rear of the scanner 3 Make sure the bar code is in the correct scanning range Aim and press the trigger The scanner has read the symbol when You hear a beep The orange light turns green The red laser turns off Quick Reference Aiming Hold at an angle Do not hold the scanner directly over the bar code Laser light reflecting directly back into the scanner from the bar code is known as specular reflection This strong light can blind the scanner and make decoding difficult The area where specular reflection occurs is known as a dead zone You can tilt the scanner up to 55 forward or back and achieve a successful decode Simple practice quickly shows what tolerances to work within y y 1 Successful 2 Possible Specular 3 Successful Scanning Reflection Scanning 8 a a Se SE Z LN i 7 Wy wv WY Shaded area represents f dead zone 2 S
13. tp www symbol com manuals 70 32817 02 Revision E July 2002 Symbol Technologies Inc One Symbol Plaza Holtsville NY 11742 1300
Download Pdf Manuals
Related Search