DVR900 manual.qxd - Pdfstream.manualsonline.com
Contents
1. channels interface display as shown below OPERATION INSTRUCTION continu Multi_Ch_Rec On Off are the 2 different status settings available Use the cursor to select and press Enter to confirm this function While On is selected there will be 4 multiple channels interface display as shown below Alarm Record Settings Multiple Channel Alarm Recording setting Alarm Channel Ch Alarm In_Mode 1 2 3 4 5 6 7 8 1 On Close Alarm_Delay 005s 2 Off Open Out_Delay 005s 3 On Open Keep_Delay 005s 4 Off Open Multi_Ch_Rec On Multi_Ch_Output On Return ON OAR WN Return Horizontal Row Channel 1 8 for 4 channels device only 4 available Vertical Column Alarm Channel 1 8 for 4 channels device only 4 available e Press Enter to select and cancel this Example As seen from above for the row 1 while alarm channel 1 received signal the channel 1 and 2 start recording channel 3 and 4 not taking any action e Example For the row 2 while alarm channel 2 received signal only channel 2 start recording other channels not taking any action Multi_Ch_Output On Off 2 difference status setting Using the cursor to select and press Enter to confirm this function While On selected there will be 4 multiple channels inter face display as shown above A 6 Channel Setting Highlight and select Channels then press Enter for this selection the sub menu will shown as below then select the required are2. Press the Play button to return to normal speed ON Fast Forward Press the FF button to perform fast forward playback with speeds at X2 or X4 Press the Play button to return to normal speed Fast Backward Press the FB button to perform fast backward playback with speed at X2 or X4 Press the Play button to return to normal speed E 1 2 3 ADJUSTMENT FOR PICTURE PARAMETER AND SOUND LEVE Parameter adjustment Use the Adjust button to adjust brightness color contrast and the motion detect sensitivity level Use the or button for adjustment up and down Returns to menu after 5 seconds idle time without any adjustment Digital Com po Parameter adjustment Use the Adjust button to adjust brightness color contrast and the motion detect sensitivity level Use the or button for adjus Ul Language English Simplified Chinese Traditional Chinese User Interface Icon operation interface OSD menu Security Video Input User level passw ord administer level passw ord 4 independent input w ith 1 0Vp p 75U BNC Video Output 1 PAL NTSC output with 1 0Vp p 75U BNC composite video 1 VGA output Video Display 1 channel and 4 channels with difference display mode Video Standard PAL 25 frames per second CCIR625 lines 50 Hz NTSC 30 frames per second CCIR525 lines 60 Hz System Resource Real time recording with 1 channel playback
3. this allow to show all the machine ID number and software version Info Menu Machine Info All Alarm Unit ID 43743746194619463289573296 Alarm Version Operate Channel HDD Machine Return Exit B 8 Exit Highlight and select Exit then press Enter to confirm for save the change of setting then return back to main menu COMPACT FLASH CARD UPGR AND OPERATION INSTRUCTION F 1 Compact Flash Card Upgrade Using a PC to make sure your Compact Flash card formated into FAT32 format if not already in the FAT32 format Insert the Compact Flash card into the DVR CF Slot while the DVR is turned off Press ON OFF button without release to switch on the power Within 2 3 seconds the LED light SYS and POWER should be flashing and that means that the upgrading is in progress 5 Upgrading will take approx 1 minute and both LEDs will turn off once upgrading has completed 6 Turn off the device and then remove the Compact Flash card from the slot 7 Restart the device and the new software should be installed AUN C 2 Compact Flash Card Backup In order to copy the data from hard disk into the Compact Flash card please follow the following procedures 1 Insert the Compact Flash card into CF Slot before the DVR s power is on 2 Power on the device and stop all recording activity 3 Press the CF card button in remote control or front panel this will allow the copying of all required information and da
4. 00 18 00 1 1 1 14 00 18 00 1 1 14 00 18 00 e Date Select either Everyday Sun Mon Tue Wed Thu Fri Sat and Peak When Peak time is selected the device does not have the stand by function e Period 1 and Period 2 Available to select the start time and end time In_Mode Open Close are the 2 different input modes for alarm signal input When the alarm system is set to the Close option when open signal starts the alarm signal is produced The input mode in here should be set as Open Alarm_Delay Key in the number key to setup the time delay range from 0 to 300 seconds for alarm recording default setting as 10 seconds Out_Delay Key in the number key to setup the time delay range from 0 to 300 seconds for alarm output default setting as 10 seconds Keep_Delay Key in the number key to setup time delay range from 0 to 300 seconds for alarm warning signal default setting as 10 seconds For example If an alarm is produced at 23 30 50 the device should start the recording from time 23 30 40 since the system per recording time was set as 10 seconds The system will release the alarm warning signal Whole recording depends on the alarm time per recording alarm time and alarm warning signal to perform recording Multi_Ch_Rec On Off are the 2 different status settings available Use the cursor to select and press Enter to confirm this function While On is selected there will be 4 multiple
5. alarm output 2 voltage output 2 open switch with output at 12VDC 500MA Alarm mode Serial Port Open Short RS485 extendable w ith external modem Serial Port _ RS232 common serial port Netw ork port a ork por RJ 45 10IW 100M boardband port Internet Protocol Support TCP IP UDP IP Transfer mode Dial up ADSL ISDN internet intranet Brow er IE brow er TECHNICAL SPECIFICATION DATA Pow er AC 220V 20 50Hz 2 Consumption 15W excluding with hard disk Working Temperature 0 50 Working Humidity 80 Outer Dimension 2U Standard device box 440 W x90 H 420 D mm Weight 5 5KG Excluding hard disk Clock Build in system clock and calendar APPENDIX l 1 IDE requirement There are 2 IDE ports in the main board 1 is master and 1 is slave J4 IDE the one close with power port as master IDE port J10 IDE as slave IDE port Master hard disk must connect first before slave hard disk operate Also while 2 hard disks connect with IDE they must be set with different jumpers to make this functional OU Pe NS l 2 Playback DVR Hard disk with PC The DVR file information requires the conversion program STMTOAVI EXE which comes with the product to make it as PC compatible and readable It simply convert those stm file into avi file which can play with media player from PC Here are some steps for STMTOAVI software instruction C
6. and select Operate Log then press Enter for this selection the sub menu will be shown as below this allow to show the recent operate status and report Info Menu Operate Log All Record Alarm Record 2003 11 28 23 30 Parameter Change Alarm Log Operate Log Channel Status Return Page Up Page Down First Page HDD Status Machine Info Exit B 5 Channel Status Highlight and select Channel Status then press Enter for this selection the sub menu will be shown as below this allows to show the 4 channel s status including image quality sharpness frame rate Info Menu Channel Status All Motion Alarm Ch Status i Frames Alarm Detection Alarm 1 Record 25 Alarm Close Operate 2 Idle 25 Alarm Close Channel 3 Record 25 Alarm Close HDD 4 Record 25 Alarm Close Machine Return Exit B 6 HDD Status Highlight and select HDD Status then press Enter for this selection the sub menu will be shown as below this allow you to view the hard disk status for 4 channels including total hard disk space and available space Info Menu HDD Status All Record Status Capacity Free_Space Alarm Record Work 040GB 012 000MB Alarm Log None 000GB 000 000MB Operate Log Work 000GB 000 000MB Channel Status Record 000GB 000 000MB HDD Status Machine Info Exit OPERATION INSTRUCTION continue B 7 Machine Info Highlight and select Machine Info then press Enter for this selection the sub menu will be shown as below
7. filled up System Select one of two options PAL and NTSC then press Enter to confirm NTSC is the standard for North American video systems while PAL is standard for European recording systems Admin_pwd_modify Allows the you to change the administrator password press Enter to enter this function It will require you to key in the new password twice to confirm the new password this option only available with the administrator authorization level Operate_pwd_modify Allows the you to change the operator password press Enter to enter this function Require the user to key in the new password twice to confirm HDD Format This will allow you to format the hard disk drive while non recording status while this option being selected select with START and press Enter to confirm this function Restore Default Setting Restore all the settings to the factory level settings A confirmation option will appear to reconfirm system restore A sample chart is shown on the next page Return Go back to previous menu OPERATION INSTRUCTION Example below is the record default setting Record Settings Channel Quality Definition Frame Mode CIF 25 CBR CIF 25 CBR CIF 25 CBR CIF 25 CBR HDD Store Mode Centralize Individual Compound Return A 2 Record Parameter Setup While system operated select Record Setting to changing some setting in here GENERAL SETTINGS Record Settings Record Settings Channel Quality Definition Fra
8. not allow to change any setting for current channel GENERAL SETTINGS Record Settings Timer Record Motion Detection Alarm Record Channels Housings Network Language Exit A 1 General Parameter Setting Highlight and select General Settings then press Enter for this selection the sub menu will shown as below then select the desired area GENERAL SETTINGS Date Time 2003 05 08 23 59 00 Saturday Unit ID Location HDD Overwrite Yes System PAL NTSC Admin_pwd_modify Operate_pwd_modify HDD Format Restore Default Setting Return Date Time Highlight and press Enter to confirm for change for date and time range will apply following e YEAR from 2000 to 2099 only change the last 2 digits eg 03 for Year 2003 e MONTH Range 01 12 e DAY Range 01 31 e HOUR Range 00 23 e MINUTE Range 00 59 e SECOND Range 00 59 After the Return key is pressed the settings will be saved while power is on However the settings will not be saved when the system restarts Unit ID Changing the ID from 000 to 999 this ID used for the login identification Location Key in the address for the location of the unit HDD Overwrite Select one of two options ON and OFF When ON is selected this will allow recording continuously even if the hard disk space fulls up The video will be recording into FIFO First In First Out format When OFF is selected the recording function will stop once the HDD has
9. the device Do not use chemicals to clean the device Live voltage does exist while the device is connected to a power supply even when the device is not turned on Disconnect the DVR when not in use for an extended period This device had been certified with the international safety standard PRODUCT FUNCTIONS FEATURE High speed embedded CPS and real time embedded control operation system are adapted with the product It provides operation stability no hang up error more reliability and ease for maintainance Operation with front panel and remote control menu language also available in English Chinese Simplified Chinese Security with double password lock System management requires authority code in order to provide safety system Uses a hardware MPEG 4 encoder to provide better streaming quality it also supports D1 1 2D1 CIF resolution and has an adjustable frame rate and provides space efficiency with compact video size Video storage using FAT32 format suitable for 1 4 IDE hard drive connections there are 3 types of storage methods in use here individual compound and mixed Provides multi channel operation such as 4 channel video audio input capture 2 channel video monitor and reply output with VGA reply output 4 channels alarm input with programmable setting Time setting to activate recording system with auto switching system re activate after power shut down Alert system for any video signal loss or dis
10. F 25 e Title Channel name e Recording Time Period for the recording time the length for each at 60 minutes e Recording method R for timer record M for manual record A for alarm record e Sharpness D1 HD1 and CIF to indicate the level of the recording information e Frame Rate While in PAL video system 25 12 06 03 01 0 5 frame rate levels will available While in NTSC video system 30 15 08 04 02 01 frame rate levels will be available OPERATION INSTRUCTION continue Press Enter to see the recording video audio signal press Fl for time select playback and press SLOW for slow motion playback at a different speed Press FF for fast forward playback and FB for fast backward playback press PAUSE key to pause the video RETURN to exit the playback window and back to main menu B 2 Alarm Record Highlight and select Alarm Record then press Enter for this selection the sub menu will be displayed as below Then select the required channel and date press Start to see the record at a specific requirement Info Menu Input date and time of alarm record All Record Alarm Record Alarm Log Operate Log Channel Status HDD Status Machine Info Exit Channel 01 Time 2003 11 28 23 30 Start Return After pressing Start there will be a sub menu shown as below and the calendar will dis play as well from date 1 to 31 at the selected month Move the cursor to select different dat
11. HDD1 and channel 2 recording into HDD2 e Compound Channel 1 and 2 video and sound signal only record into HDD1 and HDD2 taking into HDD first and then using HDD2 after the HDD1 is full At the same meaning that Channel 3 and 4 video signal and sound signal only recording into HDD3 and HDD4 taking into HDD3 first and then using HDD4 after HDD3 full Return Using the cursor to select and press Enter to confirm back to main menu A 3 Timer Record Setting Highlight and select Timer Record then press Enter for this selection the sub menu will shown as below GENERAL SETTINGS Timer Record Settings Record Settings Timer Record Ch Timer Motion_Mode Motion Detection On On Off Alarm Record On On Off Channels On On Off Housings On On Off Network Language Exit Timer Record On Off are the 2 different status settings Use the cursor to select and press Enter to confirm this function While timer selected there will be 16 different setting tasks for timer setup in each channel 8 different day types and 2 different period settings avail able for each type Channel 1 Timer Record Settings Date Period 1 Period 2 Everyday 08 00 12 00 14 00 18 00 08 00 12 00 14 00 18 00 08 00 12 00 14 00 18 00 08 00 12 00 14 00 18 00 08 00 12 00 14 00 18 00 08 00 12 00 14 00 18 00 1 1 1 08 00 12 00 14 00 18 00 1 1 08 00 12 00 14 00 18 00 Return NU OPERATION INSTRUCTION conti e Date Select either Eve
12. Highlight and select Copy Information then press Enter for this selection the sub menu will be shown as below CF Card Operation CF Card Operation CF Card Manage CF Card Manage Copy Information Copy Information Renew setting Renew setting Exit Exit Copy in progress For copying 1 device setting into other devices 2 Get all necessary settings in 1 device and then insert CF card into slot insert CF card before power on 3 After the device is powered on select Copy Information and press the Enter button 4 When copying is completed there will be a message reading Completed 5 For a failed copy operation the message Failed Copy will be displayed C 3 3 Renew setting Highlight and select Renew setting then press Enter for this selection the sub menu will be shown as below CF Card Operation CF Card Manage Copy Information Renew setting Exit Renew in progress For copying 1 device setting into other devices When all necessary settings are in already copied into the CF Using this card and insert into device slot before power on Then after the device power is on select Renew Setting with Enter button When the renew is completed there will be a message saying Completed Restart the device and all new settings will be restored SaRwn gt D D RECORDING AND PLAYBACK INSTRUCTION D 1 Recording Manual Recording 1 Use the Record button to start recordi
13. Model CVDVR900 MPEG 4 Embedded DVR User Manual NOW LOV can see www svat com INSTALLATION GUIDELINE A Installation Environment In order to ensure the safety with the DVR product and maximize product per formance please notice the following while before you install the product vi vii Only use with AV220V voltage supply please check with the power supply with correct voltage before installation DO NOT USE WITH ANY OTHER ADAPTER DO NOT PLUG INTO AC380V HIGH VOLTAGE SUPPLY Away from a humid place or exposure with rain iii DVR should be installin in a horizontal position Avoid placing the DVR in a location where electric conductivity is high Avoid exposure to direct sunlight for prolinged periods and do not store in areas with extreme temperature conditions For the heat transfer and ventilation purposes locate the DVR at least 15cm from another object such as awall while installing the device Avoid placing the DVR near any chemical product Accidental contact may harm the device viii Avoid placing the device in areas that are dusty and unkept Dust may ix damage the unit Use correct grounding for the DVR device while operating B Other notices iv Vv Vi Do not operate the device with wet hands Keep away from any wet place fire hazard can occur by short circuit damage by any liquid dropped to device Do not place anything on the top of device Use a clean cloth to clean
14. a GENERAL SETTINGS Channel Settings Record Settings Timer Record Channel Title Cover Time Insert Motion Detection 1 Warehouse Yes Yes Alarm Record Cash No No 2 Channels 3 Cash 2 No No 4 Housings Main Desk No No Network Language Exit e Title Channel name Use the cursor to select and press Enter to key in the name and re press Enter to confirm this function e Cover On Off 2 difference status setting Using the cursor to select and press Enter to confirm this function While On selected there will be cover display setting as shown below UE OPERATION INSTRUCTION contir e Use the directional key to move small yellow block selection When 4 points of yellow block are produced there will be q region wet up for the coverage setting area Time insert On Off are the 2 different status settings Use the cursor to select and press Enter to confirm this function While On selected a system clock will be shown while recording A 7 Housing Setting Highlight and select Housings then press Enter for the selection the sub menu will shown as below then select the required area GENERAL SETTINGS Housing Settings Record Settings Timer Record Channel Protocol BaudRate Motion Detection 1 pelco d 1200 Alarm Record 2 pelco p 2400 Channels 3 enkel 4800 Housings 4 ccr 20g 9600 Network Language Return Exit Pr
15. and 4 channels monitoring Audio Input Online real time monitor 4 channels independent input L R Channels 600U RCA Audio Output 1 channel from monitor mode 1 channel from playback mode 600U RCA Basic output 1 0 2 2V S N 2 30dB Recording Format Video and sound at same time Compression Encoding PCM MPEG 4 Variable encode rate Fixed encode rate Image Format CIF 352x288 pixels 1 2D1 704x288 pixels D1 704x576 pixels Video Standard 1SO14496 Audio Standard PCM Video Freq 12 5K 112 5Kbyte s 25K 150Kbyte s 50K 300Kbyte s Audio Freq 8Kbyte s Audio Size Rate 28 8Mbyte hour Video Size Rate 45M 405Mbyte hour 90M 540Mbyte hour 180M 1080Mbyte hour Storage 4 IDE hard disk support 200G or larger hard disk size Image Quality 8 Adjustable levels Max Frame Rate 25 frames sec channel 12 5 frames sec channel 6 25 frames sec channel Resolution Playback 352x288 pixels Real time 704x576 pixels VGA output 720x576 pixels Playback 704x288 pixels Real time 704x576 pixels VGA output 720x576 pixels Playback 704x576 pixels Real time704x576 pixels VGA output 720x576 pixels Data capture Motion Detect Bi directional Independent setting with each channel with 92 detect region for each channel and adjustable motion sensitivity Input 4 independent input channels Output 4 independent
16. back to operating screen from setup menu GE GOP eae eannan ai While CF card inserted this button can activate for the CF function for more details please refer with your CF Card operation instruction manual Language bs iiss icra e English Simplified Chinese Tradition Chinese selectable NSTWOFK nei eee scccharaeg semeion aad Network parameter setting RECO hese we eeehes woe teased For 4 channels monitor system Can activate 4 manual records or for single channels the monitor system can activate 1 manual record Stoplar ustearen ee g Stop manual recording Bening mesc sereirtit iedos ai esia Setting with system configuration and parameters EI EET E E EAE Time select while in Playback mode F2 dicicccnncteeen apse EE For single channel system control menu activation while this key being pressed While left right up down key pressed adjusted with station recorder left right up down direction movement press ENTER return to original position Zoom In Zoom Out Zooming adjustment Brightness Brightness Brightness adjustment FOCUS j FOCUS s eutditsccteaenceened Image Sharpness adjustment AUTO errea a Stud Meme E Auto Mode activate MONG s c c 00g deacon deine tanec Manual Adjustment Platform Def lhi c skrasmirsr arises Taa Use with Default configuration Window Wiper Lighting Control with window rain wiper and lighting Control menu quit with re press F2 FSI a de
17. d light will turn off then the monitor will be activated to show as 4 channel windows status There will be channel numbers shown to indicate each input signal Also the top of screen will show the system time number of hard disk and CF card status if applicable shown in the center of the screen there would be an alert warning for no hard disk installed all of the information will be shown on the screen for 5 6 seconds There will be a count down from 100 to 0 seconds shown in red color font The system will be locked up after the count down reaches 0 seconds Notice If the device is being set for timer record function there is no need for standby status after the system turns on the system will go to multi channel screen 2 System Login While the system is in lock in status press the Login Logoff button in the front panel or remote control then the screen will have pop up window appear stating Unit ID Unit ID 000 Select the desired unit ID Password required then key in your login password to enter into the system The DVR will accept User password or Administrator password 1 After the user password is keyed in correctly the message USER PASSWORD CORRECT will be shown Then the user can enter into restricted functional feature level functions with the device default password is 00000000 2 After the Administrator password is keyed in correctly a message ADMIN PASSWORD CORRECT will appear then the a
18. dministrator can enter into all functional feature levels with the device default password is 88888888 Remark There will be a difference between administrator and user level authorizations 1 User can only playback all existing files however they can not stop the recording or access record setup While the administrator can access all setup features 2 After the password key in correctly the count down timing shown in top right corner will change from red to green color this indicates that the user can access different operations There will be a 100 seconds operation time allowance after each key in button is pressed before system locked The user will be required to re enter their password to returnto normal operation level once the LOCK indicator shown in top right corner 3 The user must key in unit ID and password to enter into the operation system while in LOCK status 3 System Logoff Press Login Logoff button in the front panel or remote control after the record stop the system will go into standby mode Remark Please make sure the system status is in standby mode before powering off Please do not power off the machine while it is in recording or playback system setting OPERATION INSTRUCTION A Menu Setup While system is powered up select General Setting to alter the system setup The setup menu can be seen below highlight the item for selection and then press Enter to confirm while system recording
19. e cas sistas anne dart ae Auto Mode activate MOG ss saen e Manual Adjustment Platform Detayli i meen a Use with Default configuration Window Wiper Lighting Control with window rain wiper and lighting 4 Playback function ROY sn wna i RERNE Oy Definition PIGY ROCK serrr nnee eiaa aroedndes Playback function activate RENA EE ET EE EEEE Playback with slow motion with speed at 1 2X 1 4X 1 8X resume at normal speed with Playback pressed Pause POY aa earned Pause video while press once frame to frame at re press Playback Key for resume to normal Fast Forward senenin X2 X4 Speed available Playpack Key for resume at normal play Fast Backward siers ccs ares cee tia X2 X4 Speed available Playback Key for resume at normal play REMOTE CONTROL Remote Control Key Definition Function 5 Other options Key Power ON Power Off Login Locked Key Status Display Swap Channel Config Adjustment Return CF Card Language Network Record Stop Zoom In Zoom Out Brightness Brightness Focus Focus Auto Manual Default Window Wiper Lighting Definition System turn on and off Stand by and start Login to enter to operate mode with require password and lock current setting activate Checking with record information store inside of hard drive Swapping between multi channel and single channel monitor system Channel configuratio
20. ere are objects moving in the selected region the block will turn yellow and flashing This will activate the recording if there had been pre set already e Alarm On Off 2 different status settings Using the cursor to select and press Enter to confirm this function A 5 Alarm Record Setting OPERATION INSTRUCTION conti UE Highlight and select Alarm Record then press Enter for this selection the sub menu will shown as below then select the required area GENERAL SETTINGS Alarm Record Settings Record Settings Timer Record Ch Alarm In_Mode Motion Detection 1 On Alarm Record 2 Off Channels 3 On Housings 4 Off Network Language Return Exit Close Alarm_Delay 005s Open Out_Delay 005s Open Keep_Delay 005s Open Multi_Ch_Rec On Multi_Ch_Output On Alarm On Off are the 2 different status settings available Use the cursor to select and press Enter to confirm this function While On is selected there will be 16 different task settings for timer setup in each channel 8 different day types and 2 different period settings available for each type Channel 1 Alarm Record Settings Date Period 1 Everyday 08 00 12 00 Mon 08 00 12 00 Tue 08 00 12 00 Wed 08 00 12 00 Thurs 08 00 12 00 Fri 08 00 12 00 Sat 08 00 12 00 Peak 08 00 12 00 Return Period 2 14 00 18 00 14 00 18 00 14 00 18 00 14 00 18 00 14 00 18 00 14
21. es to check the record and press Enter to see The dates shown in a yellow font are dates where there has been an alarm record When no recording exists for a certain date No exist record will be displayed Using page up UP and down DO key for dates when more than 1 page recording list is available Press Enter to see the recording video audio signal Press F1 for time select playback press SLOW for slow motion playback at different speeds Press FF for fast forward play back and FB for fast backward playback with PAUSE key to make the frame pause Press RETURN to exit the playback window and back to main menu Channel 1 2003 11 28 Recording Info Channel 1 2003 11 28 Recording Info 01 02 03 04 05 06 07 08 09 10 11 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 UP DO 23 24 25 26 27 28 29 30 31 UP DO CASH 1 08 30 09 00 R CIF 25 NO EXIST RECORD CASH 2 09 30 10 00 M CIF 25 FRONT 11 30 12 00 A CIF RETURN CASH 1 17 00 18 00 R CIF R CIF WAREH 20 10 21 10 RETURN B 3 Alarm Log Highlight and select Alarm Log then press Enter for this selection the sub menu will be shown as below this allows you to see the recent alarm status and report Info Menu Alarm Log All 2003 11 28 23 30 Alarm at 1 Alarm Alarm Return Page Up Page Down First Page Operate Channel HDD Machine Exit B 4 Operate Log Highlight
22. for recording status for the 4 channel model only works for LED 1 4 others will be off LEDs that are on indicate recording in progress and LEDs that are off indicate that the system is in standby e 1 4 HD indicate 4 different hard disk working status LEDs that are on indicate hard disk work in progress and LED off indicate that the hard disk is in standby e LINK ACT Lights on when the internet is connected and blinks for data transferring e 100M 10M indicates internet speed LED will be on when transmitting 100M bps LEDs will be off for 10M bps e VGA indicates VGA connection status LED will be on when the VGA is connected LED off when disconnected 2 Menu Operation e Up Down directional keys e Left Right directional keys e ENTER Key Confirm OR Time display while in monitor mode 3 Playback function ROY e su awk lt 4 enna eee Deda eee Definition PIGY BROCK srrrsrireiansoua isid Playback function activate ENA E E T note E EE Playback with slow motion with speed at 1 2x 1 4x 1 8x resume at normal speed with Playback pressed PAUSE APIAY eei nnna anaa Pause video while press once frame to frame at re press PIGYBOCK a cis teins cetera Key for resume to normal Fast Forward occ snare 2x 4x Speed available Playback Key for resume at reg play Fast Backward 2x 4x Speed available Playback Key for resume at reg play RECOMING 242 422 cnnranecvvarse Available for 4 channels recording sin
23. gle online monitor system can play with manual recording STOB essen iew leis ood eae Stop manual recording 4 Platform Control Key KEY paresan eee eneibeee oabd dared Definition OPP stots E EEE Numeric buttons for number key in or video swapping For non menu screen 1 2 3 and 4 represent for the video channel 1 2 3 and 4 respectively Zoom In Zoom Out Zooming adjustment Brightness Brightness Brightness adjustment Focus FOCUS lt ss treina a Image Sharpness adjustment AUTO a ei AT N Auto Mode activate MANUA an Bae ogee ened Manual Adjustment Platform Default serres nannaa aai Use with Default configuration Window Wiper Lighting Control with window rain wiper and lighting FRONT PANEL continued 5 Other options Key seneese o EEEE E E Definition Power ON Power Off 4 System turn on and off Stand by and start Login Locked Key Login to enter to operate mode with require password and lock current setting activation SHOTS 2 cs E E EA EAE Checking with record information store inside of hard drive Display SWap siei Swapping between multi channel and single channel monitor system Channel Config Channel configuration ACIUSIMONT ss ssmied cde aie onssa Display with the setting of brightness colour contrast motion detect sensitivity adjust with Relu sascec essa ainie ene co ae Eaa Return
24. hown below highlight the item for selection and then press Enter to confirm Info Menu All Record Alarm Record Alarm Log Operate Log Channel Status HDD Status Machine Info Exit B 1 All Record Highlight and select All Record then press Enter for this selection the sub menu will shown as below then select the required channel and date press Start to see the record at specific requirement Info Menu Input date and time of all record AN Record Channel 01 Alar Record Time 2003 11 28 23 30 Alarm Log Start Operate Log Channel Status HDD Status Machine Info Exit Return After pressing enter there will be a sub menu shown as below and the calendar will dis play dates 1 to 31 as per selected month move the cursor to select different dates in order to check the record and press Enter to view A yellow font represents recording existance for this If no recording exists for certain date No exist record will be displayed Using page up UP and down DO key for those more than 1 page recording list Channel 1 2003 11 28 Recording Info Channel 1 2003 11 2 9 Recording Info 01 04 5 06 01 02 03 04 05 06 07 08 09 10 11 07 08 09 10 11 12 13 14 15 16 17 12 13 14 15 16 17 18 19 20 21 22 18 19 20 21 22 23 24 25 26 27 28 23 24 25 26 27 28 29 30 31 UP DO 29 30 31 UP DO CASH 1 08 30 09 00 R CIF 25 NO EXIST RECORD CASH 2 09 30 10 00 M CIF 25 FRONT 11 30 12 00 A CIF 25 CASH 1 17 00 18 00 R CI
25. iccne teens AA mee tua ee Se SA No specific function set for this key can be reserve for other function FAI eeru gta nET rN RO AEREE E While in monitor system swap with BNC VGA output Connection CF Card Compact Flash Card slot for upgrade and backup function IR Infra red receiver BACK PANEL continued Back Panel and connection outlet Ventilation fan AC220V power in Power switch Alert signal in out RS 485 4 channels input output Audio input provide 4 channels audio input Audio output 2 channels for audio out left side for replay output right side for the surveillance output Video output 2 channels for video signal output channel 1 for surveillance output channel 2 for mixed video output Video input Channel 1 4 for video signal input VGA output with external computer monitor only for Playback screen or on time recording screen not for surveillance review aAaanRWN N sO Method Press F2 in remote control after key in password then switch the screen from display output with monitor screen 10 RS 232 Standard RS 232 connection 11 Ventilation fan for main unit MPEG4 Alarm connector pin definition 180000000000000001 WBOOOOV GOOD GOO0 G16 i lerelelereleleleleralelelere t Pin definition PIN DEF FUNCTION PIN DEF FUNCTION ING shhh es Channel 1 Alarm input 16 4COM Channel 2 Alarm output 2 IND cee eead Channel 2 Alarm input 17 4NO 3 INZ 2 cere ees Channel 3 Alarm inpu
26. lick the STMTOAVI program to start Open file with select those stm file Start the conversion Provided with the output file name and output path After conversion there will be a new file with avi and must used with DIVX playback software to run the avi file DIVX version prefer with 5 03 or better NOTES Oe ONS
27. me Mode Timer Record 1 14 CIF 25 VBR Motion Detection 2 02 DI 12 CBR Alarm Record 3 03 HD1 6 VBR Channels 4 04 DI 3 VBR Housings HDD Store Mode Network Centralize Individual Compound Language Return Exit Channel 4 Channels Move the cursor to enable channel recording function If there is an X to the left of a channel recording is not allowed Pressing Enter will enable the channel HDD Format This will allow you to format the hard disk drive while in non recording status Select START and press Enter to confirm this function Image Quality From 1 to 8 levels 1 is the best quality Use the cursor to select and press Enter to confirm this function with and to move the level Definition Sharpness From D1 HD1 CIF 3 difference levels Using the cursor to select and press Enter to confirm this function D1 DVD picture sharpness quality HD1 SVCD picture sharpness quality CIF VCD picture sharpness quality Frame Rate While in PAL video system choose from 25 12 06 03 01 0 5 frame rate levels While in NTSC video system choose from 30 15 08 04 02 01 6 difference frame rate levels Using the cursor to select and press Enter to confirm this function and with and to move the level PAL video system D1 Provided with totally 25 frame second in 4 channels HD1 Provided with totally 50 frame second in 4 channels CIF Provided with totally 100 frame second in 4 channels NTSC video sys
28. n Display with the setting of brightness colour contrast motion detect sensitivity adjust with Return back to operating screen from setup menu While CF card inserted this button can activate for the CF function details please refer with CF Card operation instruction English Simplified Chinese Tradition Chinese selectable Network parameter setting For 4 channels monitor system can activate 4 manual record or for single channels monitor system can activate 1 manual record Stop manual recording Setting with system configuration and parameters Time select while Playback mode For single channel system control menu activate while this key being pressed While left right up down key pressed adjusted with station recorder left right up down direction movement press ENTER return to original position Zooming adjustment Brightness adjustment Image Sharpness adjustment Auto Mode activate Manual Adjustment Platform Use with Default configuration Control with window rain wiper and lighting Control menu quit with re press F2 No specific function set for this key can be reserve for other function While in monitor system swap with BNC VGA output SYSTEM START UP SHUT DOWN 1 System Start up Plug in your AC power turn on the main unit the red light will turn on while the system boots up The system will be in standby mode Press the ON OFF button in front panel or remote control the re
29. ng will be a red dot on the top right side corner of the monitor which indicates the recording is in progress 2 Press the Stop button to stop the recording and the red dot will turn off Timer Recording Refer to section A 3 Remark The Channel 1 timer setting has the Peak time setting from number 16 option the peak setting is not available for other channel After the Peak had been selected the device will not have any stand by mode while no setting required Alarm Recording Refer to section A 4 Remark When the device is in stand by mode there would be a 15 20 second time delay when the alarm recording activates and recording starts 2 Playback Playback all record Refer to section C 1 Playback Alarm record Refer to section C 2 Playback the recent record Press the Play button to playback current channel information 3 Playback with time select 1 Use the F1 button for current playback channel to select the time for playback 2 Use the Stop button to stop the playback D 4 Stop Playback 1 Use the Stop button to stop the playback D 5 Slow Playback 1 Use the Slow button to slow motion the playback with speeds at 1 2 1 4 or 1 8 2 Use the Play button to return to normal speed D 6 Pause Playback and Frame by Frame playback fe N gt N s N gt Use the Pause button to pause the motion While motion is paused using Pause again to play frame by frame playback
30. otocol Using the cursor to select and press Enter to confirm difference protocol pelco d p 02 15 etc BaudRate Using the cursor to select and press Enter select difference rate at 1200 2400 4800 9600 No Using the cursor to select and press Enter select difference housing number at 01 63 A 8 Network Setting Highlight and select Network then press Enter for this selection the sub menu will be shown as below then select the required area GENERAL SETTINGS Network Settings Record Settings Timer Record IP Address 029 010 001 100 Motion Detection Subnet mask 255 255 255 000 Alarm Record Default gateway 029 010 001 254 Channels Transport protocol TCP IP Housings Network Return Language Exit e IP Address Use the cursor to select and press Enter to enter the IP address Subnet mask Use the cursor to select and press Enter to enter the subnet mask at current location e Default Gateway Use the cursor to select and press Enter select default gateway according to current IP address e Transport protocol Use the cursor to select and press Enter select A 9 Language Setting Make sure that English is the default setting OPERATION INSTRUCTION conti A 10 Exit Highlight and select Exit then press Enter to confirm for save the change of setting then return back to main menu B Info Menu While system is in use select Info Menu to check the menu content The info menu can be seen as s
31. ryday Sun Mon Tue Wed Thu Fri Sat and Peak when Peak time selected the device will not use the stand by function e Period 1 and Period 2 Select start time and end time Motion Mode On Off are the 2 different status settings to enable and disable this func tion respectively Using the cursor to select and press Enter to confirm this function A 4 Motion Detection Setting Highlight and select Motion Detection then press Enter for this selection the sub menu will shown as below then select the required area GENERAL SETTINGS Motion Detection Record Settings Channel Effective Timer Record Region Motion Detection Settings Alarm Record Settings Channels Settings Housings Settings Network Language Exit Effective Region Use the cursor to select Settings and press Enter to confirm this function Then there will be a region setting screen with full of square grid as picture shown below press Setting to get the detect area as full screen all the grid squares will turn a light green square as selected re press Setting to cancel the selected areas all grid squares will turn back to clear and there will be purple flashing cursor right in the centre of screen for selection e Using the directional key to move purple cursor for selection When the grid block being selected press Enter to select the block will turn light green e Cancel with re press Enter key in the block e When th
32. t 18 4NC 4 Ngere Channel 4 Alarm input 19 COM 5 IN4 NC 20 NO 6 Nirean NC 21 NG Shoat due eed Power fault report output 7 ING raaa NC 22 COM 8 INA 2 5 s Ssztud NC 23 NO 9 OUTO Channel 3 Alarm output DAS snd NC Aang ica ds Fault report output 10 OUTI suena Channel 4 Alarm output 25 ABSA aarre 485A 11 OUT2 26 a oe ABSB oranica 485B 12 OUT3 27 38 iG ND ise aca Ground B ICOM visas Channel 1 Alarm output 39 44 12V 12V 14 3NO 15 3NC 2 4 channels alert layout definition 1 2 channels for open socket switch output no need for additional alarm driver 3 4 channels for power levels output OUT for low power out require additional alarm drive add in here REMOTE CONTROL Remote Control Key Definition Function 1 Numeric Key 0 9 Keys Numeric for number key in or video swapping For non menu screen 1 2 3 and 4 represent for the video channel 1 2 3 and 4 respectively Keys Use for volume control or while checking can play as next pervious page even changing some parameters for configuration 2 Menu Operation a v Up Down directional keys 4 gt Left Right directional keys ENTER Key Confirm OR Time display while in monitor mode 3 Platform Control Key KEV urinei ees p EEEE E AAA Definition Zoom In Zoom Out Zooming adjustment Brightness Brightness Brightness adjustment FOCUS FOCUS ci nrar Image Sharpness adjustment AUTO nes
33. ta into Compact Flash card 4 Re Press the CF card button on the remote control or front panel to stop copying C 3 Playback Compact Flash Card Content In order to playback the data from the Compact Flash card press CF card to enter the Compact Flash card menu and use the cursor to select operation C 3 1 Compact Flash card management Highlight and select CF Manage then press Enter for this selection the sub menu will be shown as seen below this allows you to view all the information of the current CF card CF Card Operation CF Card Management CF Card Manage No Record Copy Information Renew setting Previous Page Next Page Delete Help Press Enter to playback press right key butto Exit then Enter to delete Disk Space 000 060MB Availability 000 057MB Return CF OPERATION INSTRUCTION 1 No Record will be shown if there is no data in the Compact Flash Card 2 There will be a record list to viewed for data from the Compact Flash Card as shown below 3 Pressing Enter button for selected record data to playback and press the ESC button to stop the playback CF Card Operation CF Card Management CF Card Manage XXXX 09 15 09 16 M CIF 25 Copy Information XXXX 10 10 10 12 M CIF 25 Renew setting Previous Page Next Page Delete Exit Help Press Enter to playback press right key button then Enter to delete Disk Space 000 060MB Availability 000 057MB SIZE 7 813KB Return C 3 2 Copy Information
34. tem D1 Provided with totally 30 frame second in 4 channels HD1 Provided with totally 60 frame second in 4 channels CIF Provided with totally 120 frame second in 4 channels Mode VBR CBR are the 2 different encoding methods available in here Using the cursor to select and press Enter to confirm this function VBR Variable Bit Rate encoding method CBR Constant non variable Bit Rate encoding method OPERATION INSTRUCTION contir UE Conversion Table for Image Quality and Encoding Rate Image Quality Encode Rate Kbit Second Sharpness 1 2 3 4 5 6 7 8 D1 Fixed 2400 2200 2000 1800 1600 1200 1000 800 CBR HD1 Fixed 1200 1100 1000 900 800 600 500 400 E CIF Fixed 900 800 700 600 500 400 300 200 E D1 MAX 2400 2200 2000 1800 1600 1200 1000 800 MIN 2000 1800 1400 1200 1000 800 600 400 E VBR HD1 MAX 1200 1100 1000 900 800 600 500 400 MIN 900 800 700 600 500 400 300 200 MAX 900 800 700 600 500 400 300 200 Clk MIN 600 600 500 400 300 200 200 100 HDD Store Mode Centralize Individual Compound are 3 different hard disk storing modes available in here Using the cursor to select and press Enter to confirm this function e Centralize All video signal and sound signals are stored into same one hard disk and then continuously with the next hard disk after the current one becomes full e Individual Each channel of video signal and sound signals are stored into a different hard disk for example channel 1 recording into
35. turbance Available with manual time setting alert playing this will make the unit more effectively and hard space efficient The motion detect function is available with a setting for 16x12 detect region area with adjustable senitivity detect level Pre setting record function and extended alert function in order to ensure alert information capture with user requirement Has fastforward backward x2 and x4 function and slow motion rate at x1 2 x1 4 and x1 8 as well as pause and frame by frame function PAL NTSC system compatible Individual setting for each capture channel for brightness contrast color motion detect setting Complete daily report for alarm record and operation record Good for monitor records and analysis RJ 45 network inlet outlet available for the internet function for ADSL ISDN intranet etc setting with local IP and hosting address Optimized with Internet Explorer browser for remote viewing RS 485 connection for the platform decoder available for difference frequency setting and decoder parameter as well as extendable function for the decode function VGA output provides video quality and progressive scan option Supports Compact Flash card storage and IBM Microdrive disk Upgradeable with latest firmware and backup file system provide reliable storage solution FRONT PANEL F Front Panel and key definition 1 LED Indicator status area e 1 8 LED Indicators indicate 8 different channels
Download Pdf Manuals
Related Search