Home

2.0 Supplement for SPARC Enterprise T5120 and T5220 Servers

1. gt set HOST diag trigger user reset power on reset gt show HOST diag trigger user reset power on reset The default value is the combination of power on reset error reset Related Information m Managing Host Diagnostics on page 12 m Manage Diagnostics Settings Using the Web Interface on page 15 V Specify the Level of Diagnostics Using the CLI Use the HOST diag level property to specify the level of diagnostic testing to be executed when diagnostics are enabled e Atthe gt prompt type gt set HOST diag level value where value is one of the following m min Run the minimum level of diagnostics to verify the system m max Run the maximum set of diagnostics to fully verify system health the default value Related Information m Managing Host Diagnostics on page 12 m Manage Diagnostics Settings Using the Web Interface on page 15 Y Choose the Amount of Verbosity in Diagnostic Output Using the CLI Use the HOST diag verbosity property to specify the verbosity level of the output from POST diagnostics if diagnostics are enabled 14 ILOM 2 0 Supplement for Sun SPARC Enterprise e Atthe gt prompt type gt set HOST diag verbosity value where value is one of the following m none Diagnostics do not print any output on the system console when running unless a fault is detected m min Diagnostics print a limited amount of output on th
2. rsa dsa usershow username Displays a list of all user accounts show SP users permission levels and whether passwords are assigned useradd username Adds a user account to ALOM CMT create SP users username 54 ILOM 2 0 Supplement for Sun SPARC Enterprise TABLE ALOM CMT Command ALOM CMT Shell Configuration Commands Continued Summary Comparable ILOM Command userdel username userdel y username userpassword username userperm username c u a r Deletes a user account from ALOM CMT The y option enables you to skip the confirmation question Sets or changes a user password Sets the permission level for a user account delete SP users username delete script SP users username set SP users username password set SP users username role permissions where permissions are Administrator or Operator TABLE ALOM CMT Shell Log Commands ALOM CMT Command showlogs b lines e lines v g lines p logtype r p consolehistory b lines e lines v g lines boot run Summary Displays the history of all events logged in the ALOM CMT RAM event log or major and critical events in the persistent log The p option selects whether to display entries only from the RAM event log logtype r or the persistent event log logtype p Displays the host server console output buffers Comparable ILOM Command show SP logs event list
3. Display the Host s POST Version Using the CLI on page 10 m Specify Host Behavior When the Watchdog Timer Expires Using the CLI on page 10 m Specify Host Behavior When an Error Is Discovered During Diagnostics Using the CLI on page 11 m Manage Host Information Using the Web Interface on page 11 Display the Host s MAC Address Using the CLI The HOST macaddress property is automatically configured by the system software so you cannot set or change the property The value is read and determined from the server s removable system configuration card SCC PROM and then stored as a property in ILOM The HOST macaddress is the MAC address for the net 0 port The MAC addresses for each additional port increments from the HOST macaddress For example neti is equal to the value of HOST macaddress plus one 1 To view the current setting for this property type gt show HOST macaddress Related Information m Viewing Host Information and Setting System Policy Concerning Error Conditions on page 8 m Manage Host Information Using the Web Interface on page 11 Display the Host s OpenBoot Version Using the CLI The HOST obp_version property displays information about the version of OpenBoot on the host To view the current setting for this property type gt show HOST obp_version Related Information m Viewing Host Information and Setting System Policy Conce
4. Manage Diagnostics Settings Using the Web Interface on page 15 Description Tasks Manage system user Enable the System to Send a Break Signal or Force a Core Dump interactions Using the CLI on page 17 Display Host Status Information Using the CLI on page 17 Reset the Host Host reset behavior has changed to support the additional functionality of domains The reset command still generates a graceful or forced hardware reset of the host but now offers additional options to manage a control domain See the available options for both the ILOM and ALOM compatibility CLIs in ILOM and ALOM CMT Command Comparison on page 52 Related Information m ILOM and ALOM CMT Command Comparison on page 52 4 Managing Host Boot Mode Use the boot mode properties to specify how ILOM handles boot m Boot Mode on page 4 m Manage the Host s Boot Mode LDoms Configuration Using the CLI on page 5 m Manage the Host s Boot Mode Script Using the CLI on page 6 m Change the Host s Boot Mode Behavior at Reset Using the CLI on page 6 m Display the Host s Boot Mode Expiration Date Using the CLI on page 7 m Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Boot Mode Boot mode bootmode properties enable you to override the default method the server uses when it boots This ability is useful to override particular OpenBoot or LDoms settings to set up O
5. m Generate a New Set of SSH Keys Using the CLI on page 35 m Change the Type of SSH Keys Using the CLI on page 34 m Restart the SSH Server Using the CLI on page 35 m Enable or Disable the SSH Service Using the CLI on page 35 Manage the Service Processor 37 38 ILOM 2 0 Supplement for Sun SPARC Enterprise Managing Virtual Keyswitch Settings This chapter contains information on using the Sun SPARC Enterprise T5120 and T5220 servers virtual keyswitch useful for managing devices m Control the Virtual Keyswitch Using the CLI on page 39 m Control the Virtual Keyswitch Using the Web Interface on page 40 m Display Component Status Using the CLI on page 41 V Control the Virtual Keyswitch Using the CLI Use the SYS setkeyswitch_state property to control the position of the virtual keyswitch e At the gt prompt type gt set SYS keyswitch_state value where value is one of the following m normal The system can power itself on and start the boot process the default m standby Powers off the HOST cannot power itself on m diag The system can power itself on using preset values of diagnostic properties HOST diag level max HOST diag mode max HOST diag verbosity max to provide thorough fault coverage This option overrides the values of diagnostic properties that you might have set m locked The system can power itself on however you are prohibited from
6. AC power sensor Power Supply 0 1 DC power sensor Power Supply 0 1 Presence sensor Power Supply 0 1 Temperature Fault sensor Power Supply 0 1 AC voltage sensor Power Supply 0 1 DC voltage sensor ILOM 2 0 Supplement for Sun SPARC Enterprise TABLE Sensors on Sun SPARC Enterprise T5120 and T5220 Servers Continued Name Path Description PSn VOLT_FAULT SYS PSn VOLT_FAULT Power Supply 0 1 Voltage Fault sensor SASBP PRSNT Inaccessible used internally Disk Backplane Presence sensor SYS VES SYS SYS VPS Total system power in watts sensor XAUIn 0V9_FAULT Inaccessible used internally XAUI 0 1 0 9 Volt Fault sensor XAUIn 1V2_FAULT Inaccessible used internally XAUI 0 1 1 2V Fault sensor XAUIn 1V8_FAULT Inaccessible used internally XAUI 0 1 1 8V Fault sensor XAUIn 3V3_FAULT Inaccessible used internally XAUI 0 1 3 3V Fault sensor XAUIn 5V0O_FAULT Inaccessible used internally XAUI 0 1 5 0V Fault sensor Related Information m Indicators on the Sun SPARC Enterprise T5120 and T5220 on page 48 IPMI Sensor Reference 47 Indicators on the Sun SPARC Enterprise T5120 and T5220 TABLE Indicators on the Sun SPARC Enterprise T5120 and T5220 Servers Name Path Description ACT SYS ACT System Power Activity indicator Bn CHn Dn FAIL SYS MB CMP0 BRn CHn Dn SERVICE Branch Service indicator FAN_FAULT SYS FAN_FAULT Fan Fault indicator FBn FM
7. Daemons ready Integrated Lights Out Manager Version 2 0 0 0 Copyright 2007 Sun Microsystems Inc All rights reserved Use is subject to license terms sc gt In the ALOM CMT compatibility shell with a few exceptions you can use commands that resemble the commands of ALOM CMT Remember that the ALOM CMT compatibility shell is an ILOM interface The comparisons between the ILOM CLI and the ALOM CMT compatibility CLI are described in ILOM and ALOM CMT Command Comparison on page 52 Related Information m ILOM and ALOM CMT Command Comparison on page 52 ILOM and ALOM CMT Command Comparison The following table provides a command by command comparison between the command sets of ALOM CMT and the default ILOM CLI command set Only the supported ALOM CMT command options are listed in the tables below Where there are ALOM CMT command line arguments that have no corresponding ILOM properties those ALOM CMT arguments have been omitted The command set of the ALOM compatibility shell provides a close approximation of the equivalent commands and arguments where supported in ALOM CMT ILOM 2 0 Supplement for Sun SPARC Enterprise Note By default when displaying information ALOM CMT commands limit their output to a terse format offering more verbose output if a v flag is supplied with the command ILOM s show commands do not have a terse output format They always provide verbose output TABLE ALOM CMT S
8. No equivalent in ILOM show SP console history ALOM CMT Compatibility Shell 55 TABLE ALOM CMT Command ALOM CMT Shell Status and Control Commands Summary Comparable ILOM Command showenvironment showpower v shownetwork v console console f break c break D bootmode normal reset_nvram config configname bootscript string flashupdate s IPaddr f pathname v Displays the environmental status of the host server This information includes system temperatures power supply status front panel LED status hard disk drive status fan status voltage and current sensor status Displays power metrics for the host server Displays the current network configuration information The v option shows additional information about your network including information about your DHCP server Connects to the host system console The f option forces the console write lock from one user to another Drops the host server from running the Solaris OS software into OpenBoot PROM or kmdb depending upon the mode in which the Solaris software was booted Controls the host server OpenBoot PROM firmware method of booting Downloads and updates system firmware both host firmware and ALOM CMT firmware For ILOM ipaddr must be a TFTP server If DHCP is used ipaddr can be replaced by the name of the TFTP host show o table level all SYS show SP powermgmt show SP netwo
9. entit en rapport avec ce document ou tout produit ou toute technologie d crit e dans les pr sentes correspondent aux garanties express ment stipul es dans le contrat de licence r gissant le produit ou la technologie fourni e SAUF MENTION CONTRAIRE EXPRESSEMENT STIPULEE DANS CE CONTRAT FUJITSU LIMITED SUN MICROSYSTEMS INC ET LES SOCIETES AFFILIEES REJETTENT TOUTE REPRESENTATION OU TOUTE GARANTIE QUELLE QU EN SOIT LA NATURE EXPRESSE OU IMPLICITE CONCERNANT CE PRODUIT CETTE TECHNOLOGIE OU CE DOCUMENT LESQUELS SONT FOURNIS EN L TAT EN OUTRE TOUTES LES CONDITIONS REPRESENTATIONS ET GARANTIES EXPRESSES OU TACITES Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALIT MARCHANDE A L APTITUDE A UNE UTILISATION PARTICULI RE OU A L ABSENCE DE CONTREFA ON SONT EXCLUES DANS LA MESURE AUTORIS E PAR LA LOI APPLICABLE Sauf mention contraire express ment stipul e dans ce contrat dans la mesure autoris e par la loi applicable en aucun cas Fujitsu Limited Sun Microsystems Inc ou l une de leurs filiales ne sauraient tre tenues responsables envers une quelconque partie tierce sous quelque th orie juridique que ce soit de tout manque gagner ou de perte de profit de probl mes d utilisation ou de perte de donn es ou d interruptions d activit s ou de tout dommage indirect sp cial secondaire ou cons cutif m me si ces entit s ont t pr alablement inform es d une telle ventualit LA DOCUMENTATION E
10. gt set SP services ssh state value where value is one of the following m enabled the default Manage the Service Processor 35 36 m disabled Related Information m Restart the SSH Server Using the CLI on page 35 m Manage SSH Server Settings Using the Web Interface on page 36 V Manage SSH Server Settings Using the Web Interface 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Configuration gt SSH Server Settings File Edit View ABOUT Role User Admini History Bookmarks Tools Help strator root SP Hostname SUNSP00144FAC Sun Integrated Lights Out Manager Sun 7M Integrated Lights Out Manager Mozilla Firefox stem Informa System Management Access Alert Management Network Serial Port Clock Settings Web Server stem Configuration User Mat ment Syslog SMTP Client Policy SNMP SSL Certificate SSH Server SSH Server Settings Configure Secure Shell server access and key generation Newly generated keys are not used until the SSH server is restarted When the SSH server is restarted or disabled any CLI sessions running over SSH will be immediately terminated SSH Server RSA Key RSA Fingerprint RSA Key Length RSA Public Key DSA Key DSA Fingerprint DSA Key Length DSA Public Key Enabled El 71 60 91 80 2a 10 a9 3b 12 4 26 d5 16 be 4c aa 1024 bi
11. DIMM 0 1 Presence sensor Bn CHn Dn TEMP SYS MB CMPO BRn CHn Dn Branch 0 3 Channel 0 1 T_AMB DIMM 0 1 Temperature sensor FBn FMn Fn TACH SYS FANBDn FMn Fn TACH Fan Board 0 1 Fan Module 0 2 Fan 0 1 Speed sensor FBn FMn PRSNT SYS FANBDn FMn PRSNT Fan Board 0 1 Fan FBn PRSNT HDDn PRSNT MB CMP0 T_BCORE MB CMP0 T_TCORE MB I_USBn MB I_VCORE MB I_VMEML MB I_VMEMR MB P0 CPUS_BITTn MB T_AMB SYS FANBDn PRSNT SYS HDDn PRSNT SYS MB CMPO T_BCORE SYS MB CMPO T_TCORE SYS MB T_USBn Inaccessible used internally Inaccessible used internally Inaccessible used internally Inaccessible used internally SYS MB T_AMB Module 0 2 Presence sensor Fan Board 0 1 Presence sensor Hard Disk 0 15 Presence sensor Bottom of Core Temperature sensor Top of Core Temperature sensor USB Port 0 1 Current sensor CPU Core Current Threshold sensor Left memory bank current sensor Right memory bank current sensor CPU attachment 0 11 sensor Ambient Temperature Threshold sensor ILOM 2 0 Supplement for Sun SPARC Enterprise TABLE Sensors on Sun SPARC Enterprise T5120 and T5220 Servers Continued Name Path Description MB T_BUS_BARn MB V_ 12V0_MAIN MB V_1V0_VDD MB V_1V1_VDD MB V_1V2_VDD MB V_1V5_VDD MB V_1V8_GBEn MB V_ 3V3_MAIN MB V_ 3V3_STBY MB V_5V0O_VCC
12. Service Processor Settings to Factory Defaults Using the CLI on page 22 Display Console History Using the CLI on page 23 Reset the Service Processor Settings to Factory Defaults Using the Web Interface on page 23 Change Console Escape Characters Using the CLI on page 24 Specify Backup of the User Database Using the CLI on page 25 Specify Host Power On Policy Using the CLI on page 26 Disable or Re Enable Power On Delay Using the CLI on page 27 Manage Configuration Policy Settings Using the Web Interface on page 27 View Power Management Properties Using the CLI on page 30 View the Total Power Consumed By the System on page 31 View Power Management Properties Using the Web Interface on page 32 Disable or Re Enable Network Access to the SP Using the CLI on page 33 Display the DHCP Server s IP Address on page 33 Change the Type of SSH Keys Using the CLI on page 34 Generate a New Set of SSH Keys Using the CLI on page 35 Restart the SSH Server Using the CLI on page 35 Enable or Disable the SSH Service Using the CLI on page 35 Manage SSH Server Settings Using the Web Interface on page 36 19 20 Storing Customer Information This section describes ILOM features that enable you to store information for purposes such as inventory control or site resource management on the SP and FRU PROMs m Change Customer FRU Data Using
13. an immediate poweroff otherwise the command attempts a graceful shutdown reset SYS reset script SYS reset f SYS reset HOST domain control reset HOST domain control set HOST domain control auto boot disable reset HOST domain control set HOST domain control auto boot disable reset f HOST domain control stop SYS start SYS stop script SYS start script SYS stop force SYS start force SYS ALOM CMT Compatibility Shell 57 TABLE ALOM CMT Command Comparable ILOM Command Summary ALOM CMT Shell Status and Control Commands Continued poweroff poweroff y poweroff f poweron setlocator on off showfaults v clearfault UUID Removes the main power from the host server The y option enables you to skip the confirmation question ALOM CMT attempts to shut the server down gracefully The option forces an immediate shutdown Applies the main power to the host server or FRU Turns the Locator LED on the server on or off Displays current valid system faults Manually repairs system faults stop SYS stop script SYS stop force SYS start SYS set SYS LOCATE value value show SP faultmgmt set SYS component clear_fault_action true showlocator Displays the current state of the show SYS LOCATE Locator LED as either on or off TABLE ALOM CMT Shell FRU Commands ALOM CMT Command Summary Comparable ILOM Command setf
14. as an SNMP and IPMI interfaces For general information about ILOM see the Integrated Lights Out Manager 2 0 User s Guide Related Information m Platform Specific ILOM Features on page 2 m ILOM Features Not Supported in SPARC Enterprise Servers on page 2 Platform Specific ILOM Features ILOM operates on many platforms supporting features that are common to all platforms Some ILOM features belong to a subset of platforms but not to all This document describes features that belong to Sun SPARC Enterprise T5120 and T5220 servers augmenting the set of features described in the Integrated Lights Out Manager 2 0 User s Guide Related Information m ILOM Overview on page 1 m ILOM Features Not Supported in SPARC Enterprise Servers on page 2 ILOM Features Not Supported in SPARC Enterprise Servers Among the ILOM features supported on other platforms ILOM does not support the following features on Sun SPARC Enterprise T5120 and T5220 servers m ILOM Remote Console m Chassis Monitoring Module CMM features such as single sign on Related Information m ILOM Overview on page 1 m Platform Specific ILOM Features on page 2 2 ILOM 2 0 Supplement for Sun SPARC Enterprise Manage the Host This section contains information about ILOM features on the Sun SPARC Enterprise T5120 and T5220 servers that augment the array of properties that are common to ILOM on other platforms In particular this
15. chapter describes the properties in the HOST namespace This section consists of Description Tasks Understand new Host reset behavior Manage the Host boot mode View Host information and set system policy concerning error conditions Manage Host diagnostics Reset the Host on page 4 Boot Mode on page 4 Manage the Host s Boot Mode LDoms Configuration Using the CLI on page 5 Manage the Host s Boot Mode Script Using the CLI on page 6 Change the Host s Boot Mode Behavior at Reset Using the CLI on page 6 Display the Host s Boot Mode Expiration Date Using the CLI on page 7 Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Display the Host s MAC Address Using the CLI on page 9 Display the Host s OpenBoot Version Using the CLI on page 9 Display the Host s POST Version Using the CLI on page 10 Specify Host Behavior When the Watchdog Timer Expires Using the CLI on page 10 Specify Host Behavior When an Error Is Discovered During Diagnostics Using the CLI on page 11 Manage Host Information Using the Web Interface on page 11 Change the Diagnostics Mode Using the CLI on page 13 Specify Diagnostic Trigger Conditions Using the CLI on page 13 Specify the Level of Diagnostics Using the CLI on page 14 Choose the Amount of Verbosity in Diagnostic Output Using the CLI on page 14
16. contain up to 1 Mbyte of information If ILOM senses a host server reset it writes boot information and initialization data into the console buffer until ILOM is notified by the server that the Solaris OS is up and running Note You must have Administrator level user permissions to use this command Manage the Service Processor 23 e At the gt prompt type the following command gt set SP console history property option gt show SP console history where property can be one of the following m line_count This option accepts a value within the range of 1 to 2048 lines Specify for an unlimited number of lines The default is all lines m pause_count This option accepts a value of 1 to any valid integer or for infinite number of lines The default is not to pause m start_from The options are m end The last line most recent in the buffer the default a beginning The first line in the buffer If you type the show SP console history command without having set any arguments with the set command ILOM displays all lines of the console log starting from the end Note Timestamps recorded in the console log reflect server time These timestamps reflect local time and the ILOM console log uses UTC Coordinated Universal Time The Solaris OS system time is independent of the ILOM time 24 V Change Console Escape Characters Using the CLI Use the SP c
17. login prompt The factory default password is changeme XXXXXXXXXXXXXXXXXX login root Password Waiting for daemons to initialize Daemons ready Integrated Lights Out Manager Version 2 0 0 0 Copyright 2007 Sun Microsystems Inc All rights reserved Use is subject to license terms 50 ILOM 2 0 Supplement for Sun SPARC Enterprise Warning password is set to factory default 2 Create a user named admin and set the admin account role to Administrator and the CLI mode to alom gt create SP users admin Creating user Enter new password Enter new password again Created SP users admin gt set SP users admin role Administrator Set role to Administrator gt set SP users admin cli_mode alom Set cli_mode to alom Note The asterisks in the example will not appear when you enter your password You can combine the create and set commands on a single line gt create SP users admin role Administrator cli_mode alom Creating user Enter new password Enter new password again Created SP users admin 3 Log out of the root account after you have finished creating the admin account gt exit ALOM CMT Compatibility Shell 51 52 4 Log in to the ALOM CLI shell indicated by the sc gt prompt from the ILOM login prompt XXXXXXXXXXXXXXXXX login admin Password Waiting for daemons to initialize
18. supported by all OS versions Related Information m Display Host Status Information Using the CLI on page 17 Vv Display Host Status Information Using the CLI Use the show HOST status command to display information about the host server s status e At the gt prompt type gt show HOST status The command returns information similar to the following gt show HOST status Properties status Running Commands show gt Related Information m Enable the System to Send a Break Signal or Force a Core Dump Using the CLI on page 17 Manage the Host 17 18 ILOM 2 0 Supplement for Sun SPARC Enterprise Manage the Service Processor This section contains information on ILOM properties on the Sun SPARC Enterprise T5120 and T5220 servers that augment the array of properties that are common to ILOM on other platforms In particular this section covers properties in the SP namespace Description Task Store customer information Change service processor setting to the defaults Modify console escape characters Change configuration policy settings Display power management metrics Manage network access Manage SSH server settings Change Customer FRU Data Using the CLI on page 20 Change System Identification Information Using the CLI on page 20 Change Customer Identification Information Using the Web Interface on page 21 Reset the
19. the CLI on page 20 m Change System Identification Information Using the CLI on page 20 m Change System Identification Information Using the CLI on page 20 Change Customer FRU Data Using the CLI Use the SP customer_frudata property to store information in all FRU PROMs e At the gt prompt type gt set SP customer frudata data Note The data string data must be enclosed in quote marks Related Information m Change System Identification Information Using the CLI on page 20 m Change Customer Identification Information Using the Web Interface on page 21 Change System Identification Information Using the CLI Use the SP system_identifier property to store customer identification information e At the gt prompt type gt set SP system identifier data Related Information m Change Customer FRU Data Using the CLI on page 20 ILOM 2 0 Supplement for Sun SPARC Enterprise m Change Customer Identification Information Using the Web Interface on page 21 V Change Customer Identification Information Using the Web Interface ILOM provides features that enable you to store information on FRUs and the SP 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select System Information gt Identification Information S ni TM Integrated Lights Out Manager Mozilla Firefox File Edit View History Bookm
20. 3 v Specify Diagnostic Trigger Conditions Using the CLI 13 v Specify the Level of Diagnostics Using the CLI 14 v Choose the Amount of Verbosity in Diagnostic Output Using the CLI 14 v Manage Diagnostics Settings Using the Web Interface 15 Managing System User Interactions 16 v Enable the System to Send a Break Signal or Force a Core Dump Using the CLI 17 v Display Host Status Information Using the CLI 17 Manage the Service Processor 19 Storing Customer Information 20 v Change Customer FRU Data Using the CLI 20 v Change System Identification Information Using the CLI 21 v Change Customer Identification Information Using the Web Interface 21 Changing Service Processor Settings to Factory Defaults 22 v Reset the Service Processor Settings to Factory Defaults Using the CLI 22 v Reset the Service Processor Settings to Factory Defaults Using the Web Interface 23 v Display Console History Using the CLI 23 v Change Console Escape Characters Using the CLI 24 Changing Configuration Policy Settings 25 v Specify Backup of the User Database Using the CLI 25 v Specify Host Power On Policy Using the CLI 26 vi ILOM 2 0 Supplement for Sun SPARC Enterprise v Disable or Re Enable Power On Delay Using the CLI 27 v Manage Configuration Policy Settings Using the Web Interface 27 Displaying Power Management Metrics 28 Power Management Terminology 29 v View Power Management Properties Using the CLI 30 v View the Total Power Consumed By the Sy
21. LDom Configuration Manage the Host 7 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Remote Control gt Boot Mode Settings Sun 7M Integrated Lights Out Manager Mozilla Firefox File Edit View History Bookmarks Tools Help Role User Administrator root SP Hostname SUNSPO0144FA0ACD9 Sun Integrated Lights Out Manager I System Information System Monitoring Configuration User Management Remote Control Maintenance Remote Power Control Diagnostics Host Control Boot Mode Settings Keyswitch Boot Mode Configure boot mode settings Select an option for state either Normal or Reset_nvram Enter the boot script and LDOM configuration State Normal x Expiration Date Script LDOM Config 3 Select the Boot Mode State if desired 4 View the Expiration Date 5 Specify a boot script if desired 6 Specify an LDoms configuration file if desired 7 Click Save Related Information m Reset the Host on page 4 m Managing Host Boot Mode on page 4 8 Viewing Host Information and Setting System Policy Concerning Error Conditions Use the host information properties to view system configuration and firmware version information m Display the Host s MAC Address Using the CLI on page 9 m Display the Host s OpenBoot Version Using the CLI on page 9 ILOM 2 0 Supplement for Sun SPARC Enterprise m
22. MB V_VBAT MB V_VCORE MB V_VCORE_POK MB V_VDDIO MB V_VMEML MB V_VMEMR MB V_VTTL MB V_VTTR MB VMEML_POK Inaccessible used internally SYS MB V_ 12V0 MAIN Inaccessible used internally Inaccessible used internally Inaccessible used internally Inaccessible used internally Inaccessible used internally SYS MB V_ 3V3 MAIN SYS MB V_ 3V3_STBY Inaccessible used internally SYS MB V_VBAT SYS MB V_VCORE SYS MB V_VCORE_POK SYS MB V_VDDIO SYS MB V_VMEML SYS MB V_VMEMR Inaccessible used internally Inaccessible used internally SYS MB VMEML_POK Motherboard Bus Bar 0 1 Temperature sensor 12V Main Voltage Threshold sensor 1 0V Main Voltage Threshold sensor 1 1V Main Voltage Threshold sensor 1 2V Main Voltage Threshold sensor 1 5V Main Voltage Threshold sensor NET 0 1 Voltage Threshold sensor 3 3V Main Voltage Threshold sensor 3 3V Standby Voltage Threshold sensor 5V Main Voltage Threshold senso Battery Voltage Threshold sensor CPU Core Voltage Threshold sensor Core Power for CPU Within Specification sensor Voltage Threshold sensor Left Memory Branch Voltage Threshold sensor Right Memory Branch Voltage Threshold sensor Left Memory Riser 0 1 VTT Voltage Right Memory Riser 0 1 VTT Voltage Left Memory Branch Power Within Specification sensor IPMI Sensor Reference 45 TABLE Se
23. Monitoring Configuration User Management Sensor Readings Indicators EventLogs Power Management Power Management View power management settings from this page Actual Power 1859 watts Permitted Power 2767 watts 3 View the Actual Power consumption 4 View the Permitted Power consumption 5 View the Available Power Related Information m Power Management Terminology on page 29 m View the Total Power Consumed By the System on page 31 m View Power Management Properties Using the CLI on page 30 Managing Network Access This section describes managing network access to the SP using ILOM m Disable or Re Enable Network Access to the SP Using the CLI on page 33 m Display the DHCP Server s IP Address on page 33 32 ILOM 2 0 Supplement for Sun SPARC Enterprise Y Disable or Re Enable Network Access to the SP Using the CLI Use the SP network state property to enable or disable the service processor s network interface e At the gt prompt type gt set SP network state value where value can be m enabled the default m disabled Related Information m Display the DHCP Server s IP Address on page 33 V Display the DHCP Server s IP Address To display the IP address of the DHCP server that provided the dynamic IP address requested by the service processor view the dhcp_server_ip property To see the dhcp_server_ip property type show SP netw
24. PRESSLY SET FORTH IN SUCH AGREEMENT FUJITSU LIMITED SUN MICROSYSTEMS INC AND THEIR AFFILIATES MAKE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND EXPRESS OR IMPLIED REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS DOCUMENT WHICH ARE ALL PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID Unless otherwise expressly set forth in such agreement to the extent allowed by applicable law in no event shall Fujitsu Limited Sun Microsystems Inc or any of their affiliates have any liability to any third party under any legal theory for any loss of revenues or profits loss of use or data or business interruptions or for any indirect special incidental or consequential damages even if advised of the possibility of such damages DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID Copyright 2008 Sun Microsystems Inc 4150 Network Circle Santa Clara Californie 95054 tats Unis Tous droits r serv s Revue technique fournie par FUJITSU LIMITED sur des parties de
25. RS amp UN microsystems Sun Integrated Lights Out Manager ILOM 2 0 Supplement for Sun SPARC Enterprise T5120 and T5220 Servers Sun Microsystems Inc www sun com Part No 820 2180 12 July 2009 Revision 01 Submit comments about this document by clicking the Feedback link at http docs sun com Copyright 2009 Sun Microsystems Inc 4150 Network Circle Santa Clara California 95054 U S A All rights reserved FUJITSU LIMITED provided technical input and review on portions of this material Sun Microsystems Inc and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this document and such products technology and this document are protected by copyright laws patents and other intellectual property laws and international treaties The intellectual property rights of Sun Microsystems Inc and Fujitsu Limited in such products technology and this document include without limitation one or more of the United States patents listed at http www sun com patents and one or more additional patents or patent applications in the United States or other countries This document and the product and technology to which it pertains are distributed under licenses restricting their use copying distribution and decompilation No part of such product or technology or of this document may be reproduced in any form by any means without prior written authorization of F
26. ST FOURNIE EN L ETAT ET TOUTES AUTRES CONDITIONS DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE A L APTITUDE A UNE UTILISATION PARTICULIERE OU A L ABSENCE DE CONTREFACON Contents Preface ix ILOM for the Sun SPARC Enterprise T5120 and T5220 Servers 1 ILOM Overview 1 Platform Specific ILOM Features 2 ILOM Features Not Supported in SPARC Enterprise Servers 2 Manage the Host 3 Reset the Host 4 Managing Host Boot Mode 4 Boot Mode 4 v Manage the Host s Boot Mode LDoms Configuration Using the CLI 5 v Manage the Host s Boot Mode Script Using the CLI 6 v Change the Host s Boot Mode Behavior at Reset Using the CLI 6 v Display the Host s Boot Mode Expiration Date Using the CLI 7 v Manage Boot Mode Configuration Settings Using the Web Interface 7 Viewing Host Information and Setting System Policy Concerning Error Conditions 8 Display the Host s MAC Address Using the CLI 9 v Display the Host s OpenBoot Version Using the CLI 9 v Display the Host s POST Version Using the CLI 10 v Specify Host Behavior When the Watchdog Timer Expires Using the CLI 10 v Specify Host Behavior When an Error Is Discovered During Diagnostics Using the CLI 11 v Manage Host Information Using the Web Interface 11 Managing Host Diagnostics 12 v Change the Diagnostics Mode Using the CLI 1
27. abled When power is restored returns the server to the state it was in before the power was removed m disabled Keeps the server off when power is applied the default If you enable HOST_LAST_POWER_STATE you should also configure SP policy HOST_POWER_ON_DELAY as well For further information see Disable or Re Enable Power On Delay Using the CLI on page 27 Use SP policy HOST_AUTO_POWER_ON to power on the host automatically when the service processor has been booted If this policy is set to enabled the service processor sets HOST_LAST_POWER_STATE to disabled 2 At the gt prompt type gt set SP policy HOST AUTO POWER ON enabled where the value for this property is one of the following m enabled When power is applied automatically powers on the host when the SP has been booted m disabled Keeps the host power off when power is applied the default 26 ILOM 2 0 Supplement for Sun SPARC Enterprise Related Information m Manage Configuration Policy Settings Using the Web Interface on page 27 V Disable or Re Enable Power On Delay Using the CLI Use the SP policy HOST_POWER_ON_DELAY property to cause the server to wait for a short time before powering on automatically The delay is a random interval of one to five seconds Delaying the server poweron helps minimize current surges on the main power source This poweron delay is important when multiple servers in racks power on after a p
28. actory default Related Information m Reset the Host on page 4 m Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Manage the Host 5 V Manage the Host s Boot Mode Script Using the CLI e Atthe gt prompt type gt set HOST bootmode script value where script controls the host server OpenBoot PROM firmware method of booting It does not affect the current HOST bootmode setting string can be up to 64 bytes in length You can specify a HOST bootmode setting and set the script within the same command For example gt set HOST bootmode state reset_nvram script setenv diag switch true 6 After the server resets and OpenBoot PROM reads the values stored in the script it sets the OpenBoot PROM variable diag switch to the user requested value of true Note If you set HOST bootmode script ILOM sets the script to empty If you set HOST bootmode config ILOM sets the config to empty Related Information m Reset the Host on page 4 m Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Change the Host s Boot Mode Behavior at Reset Using the CLI The HOST bootmode state property controls how OpenBoot nonvolatile random access memory NVRAM variables are used Normally the current settings of these variables are retained Setting HOST bootmode state reset_nvram changes the OpenBoot NVRAM variables to th
29. arks Tools Help inistrator root SP Hostname SUNSPO0144FADACD3 Sun Integrated Lights Out Manager il System Information System Monitoring Configuration User Management Remote Control Maintenance i Versions Session Time Out Components Fault Management Identification Information Identification Information Configure identification information Customer FRU Data SP Hostname SUNSPO0144FADACD9 SP System Identifier 3 Edit the Customer FRU data field if desired 4 Edit the SP Hostname if desired 5 Edit the SP System Identifier field if desired 6 Click Save Related Information m Change Customer FRU Data Using the CLI on page 20 m Change System Identification Information Using the CLI on page 20 Manage the Service Processor 21 Changing Service Processor Settings to Factory Defaults This section describes how to set service processor settings back to the factory defaults m Reset the Service Processor Settings to Factory Defaults Using the CLI on page 22 m Reset the Service Processor Settings to Factory Defaults Using the Web Interface on page 23 V Reset the Service Processor Settings to Factory Defaults Using the CLI Use the set SP reset_to_defaults command to set all ILOM configuration properties back to their factory default values The a11 option sets the ILOM configuration and all user information back to the factory default values 1 At the gt pro
30. ce mat riel Sun Microsystems Inc et Fujitsu Limited d tiennent et contr lent toutes deux des droits de propri t intellectuelle relatifs aux produits et technologies d crits dans ce document De m me ces produits technologies et ce document sont prot g s par des lois sur le copyright des brevets d autres lois sur la propri t intellectuelle et des trait s internationaux Les droits de propri t intellectuelle de Sun Microsystems Inc et Fujitsu Limited concernant ces produits ces technologies et ce document comprennent sans que cette liste soit exhaustive un ou plusieurs des brevets d pos s aux Etats Unis et indiqu s l adresse http www sun com patents de m me qu un ou plusieurs brevets ou applications brevet es suppl mentaires aux Etats Unis et dans d autres pays Ce document le produit et les technologies aff rents sont exclusivement distribu s avec des licences qui en restreignent l utilisation la copie la distribution et la d compilation Aucune partie de ce produit de ces technologies ou de ce document ne peut tre reproduite sous quelque forme que ce soit par quelque moyen que ce soit sans l autorisation crite pr alable de Fujitsu Limited et de Sun Microsystems Inc et de leurs ventuels bailleurs de licence Ce document bien qu il vous ait t fourni ne vous conf re aucun droit et aucune licence expresses ou tacites concernant le produit ou la technologie auxquels ie rapporte Par ailleur
31. d Toutes les marques SPARC sont utilis es sous licence et sont des marques de fabrique ou des marques d pos es de SPARC International Inc aux Etats Unis et dans d autres pays Les produits portant les marques SPARC sont bas s sur une architecture d velopp e par Sun Microsystems Inc SPARC64 est une marques d pos e de SPARC International Inc utilis e sous le permis par Fujitsu Microelectronics Inc et Fujitsu Limited L interface d utilisation graphique OPEN LOOK et Sun a t d velopp e par Sun Microsystems Inc pour ses utilisateurs et licenci s Sun reconnait les efforts de pionniers de Xerox pour la recherche et le d veloppement du concept des interfaces d utilisation visuelle ou graphique pour l industrie de l informatique Sun d tient une license non exclusive de Xerox sur l interface d utilisation graphique Xerox cette licence couvrant galement les licenci s de Sun qui mettent en place l interface d utilisation graphique OPEN LOOK et qui en outre se conforment aux licences crites de Sun Droits du gouvernement am ricain logiciel commercial Les utilisateurs du gouvernement am ricain sont soumis aux contrats de licence standard de Sun Microsystems Inc et de Fujitsu Limited ainsi qu aux clauses applicables stipul es dans le FAR et ses suppl ments Avis de non responsabilit les seules garanties octroy es par Fujitsu Limited Sun Microsystems Inc ou toute soci t affili e de l une ou l autre
32. d the Fujitsu logo are registered trademarks of Fujitsu Limited All SPARC trademarks are used under license and are registered trademarks of SPARC International Inc in the U S and other countries Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems Inc SPARC64 is a trademark of SPARC International Inc used under license by Fujitsu Microelectronics Inc and Fujitsu Limited The OPEN LOOK and Sun Graphical User Interface was developed by Sun Microsystems Inc for its users and licensees Sun acknowledges the pioneering efforts of Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry Sun holds a non exclusive license from Xerox to the Xerox Graphical User Interface which license also covers Sun s licensees who implement OPEN LOOK GUIs and otherwise comply with Sun s written license agreements United States Government Rights Commercial use U S Government users are subject to the standard government user license agreements of Sun Microsystems Inc and Fujitsu Limited and the applicable provisions of the FAR and its supplements Disclaimer The only warranties granted by Fujitsu Limited Sun Microsystems Inc or any affiliate of either of them in connection with this document or any product or technology described herein are those expressly set forth in the license agreement ee to which the product or technology is provided EXCEPT AS X
33. e SP you will lose the new property setting Instead change the network configuration property then commit it using setsc netsc_commit in the ALOM compatibility CLI or set SP network commitpending using the ILOM CLI To change the serial port configuration property first set the desired property and then commit it using setsc ser_commit in the ALOM compatibility CLI or set SP serial external commitpending using the ILOM CLI For example set a static IP address using the ALOM compatibility CLI sc gt setsc netsc_ipaddr xXXX XXX XXX XXX sc gt setsc netsc_commit true 49 To set the same property using the ILOM CLI gt set SP network pendingipaddress xxx xxx xXX XXx Set pendingipaddress to XXX XXX XXX XXX gt set SP network commitpending true Set commitpending to true gt In summary you must commit the changes before they can take effect TABLE ALOM CMT commit Variables and Comparable ILOM Properties ALOM CMT Variable Comparable ILOM Property netsc_commit SP network commitpending ser_commit SP serial external commitpending V Create an ALOM CMT Compatibility Shell Your server is configured to operate under an ILOM shell by default You can create an ALOM compatibility shell if you prefer to use commands that resemble ALOM CMT commands to administer your server 1 Log onto the service processor with the username root When powered on the SP boots to the ILOM
34. e system console m normal Diagnostics print a moderate amount of output on the system console the default value m max Diagnostics print full output on the system console including the name and results of each test being run m debug Diagnostics print extensive debugging output on the system console including devices being tested and debug output of each test Related Information Managing Host Diagnostics on page 12 Manage Diagnostics Settings Using the Web Interface on page 15 Manage Diagnostics Settings Using the Web Interface ILOM provides several ways to view or configure diagnostics There are four aspects to host control Trigger Verbosity Level Mode Log in to the ILOM web interface as Administrator root to open the web interface Select Remote Control gt Diagnostics Manage the Host 15 Sun TM Integrated Lights Out Manager Mozilla Firefox Eile Edit View History Bookmarks Tools Help Role User Administrator root SP Hostname SUNSP00144FA0ACD9 Sun Integrated Lights Out Manager N System Information System Monitoring Configuration User Management Remote Control Maintenance a Remote Power Control J Diagnostics Host Control Boot Mode Settings Keyswitch Diagnostics Select the level of embedded diagnostics to run on the host during start up The Trigger contains all possible states to cause diagnostics to be run The Verbosity leve information wil
35. efaults all set SYS keyswitch_state value set target property value No equivalent in ILOM show HOST No equivalent in ILOM ALOM CMT Compatibility Shell 53 TABLE ALOM CMT Shell Configuration Commands Continued ALOM CMT Command Summary Comparable ILOM Command showusers Displays a list of users currently show SP sessions logged in to ALOM CMT The display for this command has a similar format to that of the UNIX command who The g option pauses the display after the number of lines you specify for showusers g lines lines No equivalent in ILOM showhost Displays version information for show HOST host side components The version option displays the same information as the showhost command with no option showhost version showkeyswitch Displays status of virtual keyswitch show SYS keyswitch_state showsc param Displays the current non volatile show target property random access memory NVRAM configuration parameters showdate Displays the ALOM CMT date ALOM show SP clock datetime CMT time is expressed in Coordinated Universal Time UTC rather than local time The Solaris OS and ALOM CMT time are not synchronized ssh keygen 1 Generates Secure Shell SSH host keys show SP services ssh keys and displays the host key fingerprint rsa dsa on the SC ssh keygen r set SP services ssh generate_new_key_action ssh keygen t rsa dsa true set SP services ssh generate_new_key_type
36. eir default settings at the next reset e Atthe gt prompt type gt set HOST bootmode state value where value is one of the following ILOM 2 0 Supplement for Sun SPARC Enterprise m normal At next reset retains current NVRAM variable settings m reset_nvram At next reset returns OpenBoot variables to default settings Note The state reset_nvram command will return to normal after the next server reset or 10 minutes see expires property in Display the Host s Boot Mode Expiration Date Using the CLI on page 7 config and script properties do not expire and will be cleared upon the next server reset or manually by setting value to uu Related Information m Reset the Host on page 4 m Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Display the Host s Boot Mode Expiration Date Using the CLI e Atthe gt prompt type gt show HOST bootmode expires Properties expires Thu Oct 18 18 24 16 2007 where expires is the date and time when the current bootmode will expire Related Information m Reset the Host on page 4 m Manage Boot Mode Configuration Settings Using the Web Interface on page 7 Manage Boot Mode Configuration Settings Using the Web Interface ILOM provides several ways to configure the server s firmware environment There are four aspects to configuring the boot mode m State m Expiration Date m Script m
37. enough system components to keep relative utilization at 70 at all times even if workload fluctuates e Regulated N A e Siesta N A Related Information m Power Management Terminology on page 29 m View the Total Power Consumed By the System on page 31 m View Power Management Properties Using the CLI on page 30 m View Power Management Properties Using the Web Interface on page 32 Manage the Service Processor 29 V View Power Management Properties Using the CLI e At the gt prompt type gt show SP powermgmt For example gt show SP powermgmt SP powermgmt Targets Properties actual_power 534 permitted_power 2626 available power 2626 control local policy performance regulated_budget none elastic_budget none Commands cd set show where m actual_power displays the input power in watts consumed by all power supplies in the system m available_power displays the input power capacity in watts that is available to system components m permitted_power displays the maximum power consumption in watts expected m control option not currently supported on this platform m policy option not currently supported on this platform m regulated_budget option not currently supported on this platform m elastic_budget option not currently supported on this platform Related Information m Power Management Terminology on pa
38. ew Set of SSH Keys Using the CLI on page 35 m Manage SSH Server Settings Using the Web Interface on page 36 ILOM 2 0 Supplement for Sun SPARC Enterprise V Generate a New Set of SSH Keys Using the CLI Use the set SP services ssh generate_new_key_action command to generate a new set of Secure Shell SSH host keys e At the gt prompt type gt set SP services ssh generate_new_key_action true Related Information m Change the Type of SSH Keys Using the CLI on page 34 m Manage SSH Server Settings Using the Web Interface on page 36 V Restart the SSH Server Using the CLI Use the set SP services ssh restart_sshd_action command to restart the SSH server after you have generated new host keys using the set SP services ssh generate_new_key_action command This action reloads the keys in to the server s dedicated data structure in memory e At the gt prompt type gt set SP services ssh restart_sshd_action true Related Information m Enable or Disable the SSH Service Using the CLI on page 35 m Manage SSH Server Settings Using the Web Interface on page 36 Y Enable or Disable the SSH Service Using the CLI Use the SP services ssh state property with the set command to enable or disable the SSH service If the SSH service has been disabled you can re enable it through the Serial Management SER MGT port or the ILOM web interface e At the gt prompt type
39. ge 29 30 ILOM 2 0 Supplement for Sun SPARC Enterprise m View the Total Power Consumed By the System on page 31 m View Power Management Properties Using the Web Interface on page 32 Vv View the Total Power Consumed By the System The value of SYS VPS is equivalent to the value of SP powermgmt actual_power e Atthe gt prompt type gt show SYS VPS For example gt show SYS VPS SYS VPS Targets Properties type Power Unit class Threshold Sensor value 528 031 Watts upper_nonrecov_threshold upper_critical_threshold upper_noncritical_threshold lower_noncritical_threshold lower_critical_threshold lower_nonrecov_threshold Commands cd show N A N A N A N A N A N A Related Information m Power Management Terminology on page 29 m View Power Management Properties Using the CLI on page 30 m View Power Management Properties Using the Web Interface on page 32 Manage the Service Processor 31 V View Power Management Properties Using the Web Interface 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select System Monitoring gt Power Management Sun TM Integrated Lights Gut Manager Mozilla Firefox Eile Edit View History Bookmarks Tools Help Role Useri Administrator root SP Hostname SUNSP00144FADACD9 Sun Integrated Lights Out Manager System Information System
40. hell Configuration Commands ALOM CMT Command password restartssh setdate mmdd HHMM mmddHHMM cclyy SS setdefaults setdefaults setkeyswitch normal stby diag locked setsc param value setupsc showplatform v showfru Summary Changes the login password of the current user Restarts the SSH server so that new host keys generated by the ssh keygen command are reloaded Sets ALOM CMT date and time Resets all ALOM CMT configuration parameters to their default values The a option resets the user information to the factory default one admin account only Sets the status of the virtual keyswitch Setting the virtual keyswitch to standby stby powers off the server Before powering off the host server ALOM CMT asks for a confirmation Sets the specified ALOM CMT parameter to the assigned value Runs the interactive configuration script This script configures the ALOM CMT configuration variables Displays information about the host system s hardware configuration and whether the hardware is providing service The v option displays verbose information about the displayed components Displays information about the field replaceable units FRUs in a host server Comparable ILOM Command set SP users username password set SP services ssh restart_sshd_action true set SP clock datetime value set SP reset_to_defaults configuration set SP reset_to_d
41. is User s Guide Documentation Support and Training TABLE Function URL Documentation http www sun com documentation Support http www sun com support Training http www sun com training Third Party Web Sites Sun is not responsible for the availability of third party web sites mentioned in this document Sun does not endorse and is not responsible or liable for any content advertising products or other materials that are available on or through such sites or resources Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content goods or services that are available on or through such sites or resources Preface xi xii ILOM 2 0 Supplement for Sun SPARC Enterprise ILOM for the Sun SPARC Enterprise T5120 and T5220 Servers This section introduces ILOM for the Sun SPARC Enterprise T5120 and T5220 servers and provides references to more generic ILOM documentation m ILOM Overview on page 1 m Platform Specific ILOM Features on page 2 m ILOM Features Not Supported in SPARC Enterprise Servers on page 2 ILOM Overview Integrated Lights Out Manager ILOM is system management firmware that is preinstalled on some SPARC servers ILOM enables you to actively manage and monitor components installed in your server ILOM provides a browser based interface and a command line interface as well
42. l be given The Update Mode contains all the possible OPS modes specified to POST Trigger None gt Verbosity Normal Level Max gt Current Mode off Update Mode Off a 3 Select a value for Trigger if desired 4 Select a value for Verbosity if desired 5 Select a value for Level if desired 6 View the Current Mode 7 Select a value for Update Mode if desired Related Information m Managing Host Diagnostics on page 12 16 Managing System User Interactions The system user properties enable you to customize the way ILOM identifies and interacts with the host server m Enable the System to Send a Break Signal or Force a Core Dump Using the CLI on page 17 m Display Host Status Information Using the CLI on page 17 ILOM 2 0 Supplement for Sun SPARC Enterprise Vv Enable the System to Send a Break Signal or Force a Core Dump Using the CLI Use the set HOST send_break_action command to bring the server to a menu from which you can choose to go to the OpenBoot PROM prompt ok If you have configured the kmdb debugger then specifying the send_break_action break brings the server in to debug mode Specify send_break_action dumpcore to force a core dump e Atthe gt prompt type gt set HOST send_break_action value where value is one of the following m break Sends a break to the host m dumpcore Forces a panic core dump of the managed system OS not
43. mpt type gt set SP reset_to_defaults all where for reset_to_defaults can be set to one of the following m none Make no changes m all At the next SP reset clear the user database and change all configuration properties to their defaults 2 Reset the service processor so that the new property value can take effect Related Information m Reset the Service Processor Settings to Factory Defaults Using the Web Interface on page 23 22 ILOM 2 0 Supplement for Sun SPARC Enterprise V Reset the Service Processor Settings to Factory Defaults Using the Web Interface 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Maintenance gt Configuration Management Sun TM Integrated Lights Out Manager Mozilla Firefox OG Eile Edit View History Bookmarks Tools Help Role User Administrator root SP Hostname SUNSP00144FADACD9 Sun Integrated Lights Out Manager Firmware Upgrade fesetsP Configuration Management Configuration Management Manage the SP configuration on this page Clicking Reset Defaults will restore the SP configuration to factory settings Reset Defaults None 3 Select a Reset Defaults value 4 Click Reset Defaults Related Information m Reset the Service Processor Settings to Factory Defaults Using the CLI on page 22 V Display Console History Using the CLI The console buffer can
44. n SERVICE SYS FANBDn FMn SERVICE Fan Board 0 1 Fan Module 0 3 Service indicator HDDn OK2RM SYS HDDn OK2RM Hard Disk 0 15 Okay to Remove indicator HDDn SERVICE SYS HDDn SERVICE Hard Disk 0 15 Service indicator LOCATE SYS LOCATE Locate indicator PS_FAULT SYS PS_FAULT Power Supply Fault indicator SERVICE SYS SERVICE Service indicator TEMP_FAULT SYS TEMP_FAULT Related Information m Sensors on Sun SPARC Enterprise T5120 and T5220 on page 44 48 ILOM 2 0 Supplement for Sun SPARC Enterprise Temperature Fault indicator ALOM CMT Compatibility Shell ILOM supports some of the features of the ALOM CMT command line interface by means of a compatibility shell There are significant differences between ILOM and ALOM CMT This appendix describes those differences This appendix includes the following topics m Commit ILOM Network Configuration Properties on page 49 m Create an ALOM CMT Compatibility Shell on page 50 m ILOM and ALOM CMT Command Comparison on page 52 Commit ILOM Network Configuration Properties When changing the values of some ALOM CMT variables such as network and serial port configuration variables it was necessary to reset the system controller before the changes took effect By comparison in ILOM it is not necessary to reset the service processor after changing the values of comparable properties In ILOM if you change the value of the property and then reset th
45. nsors on Sun SPARC Enterprise T5120 and T5220 Servers Continued Name Path Description MB VMEMR_POK MB XAUIn PRSNT PDB 5V0_POK PSn AC_POK PSn CUR_FAULT PSn DC_POK PSn FAIL PSn FAN_FAULT PSn I_IN_LIMIT a PSn I_IN_MAIN ati PSn I_OUT_LIMIT PSn I_OUT_MAIN PSn IN_POWER PSn OUT_POWER PSn PRSNT ie PSn TEMP_FAULT ee PSn V_IN_MAIN Ni PSn V_OUT_MAIN SYS MB VMEMR_POK Inaccessible used internally Inaccessible used internally SYS PSn AC_POK SYS PSn CUR_FAULT SYS PSn DC_POK Inaccessible used internally SYS PSn FAN_FAULT SYS PSn I_IN_ LIMIT SYS PSn I_IN_ MAIN SYS PSn I_OUT_LIMIT SYS PSn I_OUT_MAIN SYS PSn IN_POWER SYS PSn OUT_POWER SYS PSn PRSNT SYS PSn TEMP_FAULT SYS PSn V_IN_MAIN SYS PSn V_OUT_MAIN Right Memory Branch Power Within Specification sensor XAUI 0 1 Presence sensor PDB 5 0V Power Within Specification sensor Power Supply 0 1 Power Within Specification sensor Power Supply 0 1 Current Fault sensor Power Supply 0 1 DC power sensor Power Supply 0 1 Alert sensor Power Supply 0 1 Fan Fault sensor Power Supply 0 1 AC current limit sensor Power Supply 0 1 AC current sensor Power Supply 0 1 DC current limit sensor Power Supply 0 1 DC current limit sensor Power Supply 0 1
46. onsole escapechars property to change the escape character sequence to switch from a system console session back to ILOM e At the gt prompt type gt set SP console escapechars xx The sequence is limited to two characters The default value is Hash Period The sequence can be customized where xx are any printable characters ILOM 2 0 Supplement for Sun SPARC Enterprise Note Changing the escape character does not take effect in a currently active console session Related Information m Reset the Host on page 4 Changing Configuration Policy Settings This section describes managing configuration system policies using ILOM m Specify Backup of the User Database Using the CLI on page 25 m Specify Host Power On Policy Using the CLI on page 26 m Disable or Re Enable Power On Delay Using the CLI on page 27 m Manage Configuration Policy Settings Using the Web Interface on page 27 Vv Specify Backup of the User Database Using the CLI The SP policy BACKUP_USER_DATA property specifies whether the local user database on ILOM that is user password and permission information should be backed up When this property is set to enable this data is backed up on the removable system configuration card SCC PROM on the system e At the gt prompt type gt set SP policy BACKUP_USER_DATA value where the value is one of the following m enabled Back
47. ontain information on basic UNIX commands and procedures such as shutting down the system booting the system and configuring devices See one of the following for this information m Software documentation that you received with your system m Solaris Operating System documentation which is at http docs sun com Shell Prompts TABLE Shell Prompt C shell machine name C shell superuser Bourne shell and Korn shell Bourne shell and Korn shell superuser ILOM service processor ALOM compatibility shell OpenBoot PROM firmware Related Documentation machine name gt sc gt ok For more information about how to work with your host server see the documents available at http docs sun com app docs prod sparc t5120 http docs su n com app docs prod sparc t5220 The following documentation provides information about how to perform certain tasks related to ILOM TABLE Task Title Information that is common to all platforms managed by ILOM ILOM 2 0 Supplement for Sun SPARC Enterprise Sun Integrated Lights Out Manager 2 0 User s Guide TABLE Continued Task Title Performing diagnostic tests SunVTS User s Guide SunVTS Quick Reference Guide SunVTS Test Reference Manual Sun Management Center Software User s Guide System and network administration Solaris System Administrator Guide SPARC Installing Solaris Software Using the operating system Solar
48. ork For example gt show SP network SP network SP network Targets Properties commitpending Cannot show property dhcp_server_ip 10 8 31 5 ipaddress 10 8 31 188 ipdiscovery dhcp ipgateway 10 8 31 248 ipnetmask 255 255 252 0 macaddress 00 14 4F 7E 83 4F pendingipaddress 10 8 31 188 pendingipdiscovery dhcp pendingipgateway 10 8 31 248 pendingipnetmask 255 255 252 0 state enabled Manage the Service Processor 33 Commands cd set show Related Information m Disable or Re Enable Network Access to the SP Using the CLI on page 33 34 Managing SSH Server Settings m Change the Type of SSH Keys Using the CLI on page 34 m Generate a New Set of SSH Keys Using the CLI on page 35 m Restart the SSH Server Using the CLI on page 35 m Enable or Disable the SSH Service Using the CLI on page 35 m Manage SSH Server Settings Using the Web Interface on page 36 Change the Type of SSH Keys Using the CLI Use the set SP services ssh generate_new_key_type command to change the type of Secure Shell SSH host keys generated on your server After changing the type you must use the set SP services ssh generate_new_key_action command to generate a new set of keys of the new type e At the gt prompt type gt set SP services ssh generate_new_key_ type value where value can be rsa or dsa Related Information m Generate a N
49. ower outage This property takes effect only if SP policy HOST_LAST_POWER_STATE is set to enabled e At the gt prompt type gt set SP policy HOST_POWER_ON_DELAY value where value can be m enabled m disabled the default V Manage Configuration Policy Settings Using the Web Interface 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Configuration gt Policy Manage the Service Processor 27 System ManagementAccess Alert Management Network SerialPort Clock Settings Syslog SMTP Client Policy Suni TM Integrated Lights Out Manager Mozilla Firefox File Edit View History Bookmarks Tools Help Role User Administrator root SP Hostname SUNSP00144FA0ACD9 Sun Integrated Lights Out Manager Policy Configuration Configure system policies from this page To modify a policy select the radio button next to that policy then choose Enable or Disable from the Action drop down list Service Processor Policies Actions gt Description Auto power on host on boot enabling this policy disables Set host power to last power state policy Set host power to last power state on boot enabling this policy disables Auto power on host policy 999 oE Set to delay host power on Set to enable backing up of user account info to SCC card 3 Click the Policy radio button of the policy you
50. penBoot variables using a script or similar tasks ILOM 2 0 Supplement for Sun SPARC Enterprise For example you can set the bootmode state property to reset_nvram then reset the server to its factory default OpenBoot settings Service personnel might instruct you to use the bootmode script property for problem resolution The full extent of script capabilities are not documented and exist primarily for debugging Because bootmode is intended to be used to correct a problem with the OpenBoot or LDoms settings the bootmode takes effect for a single boot only Additionally to prevent an administrator from setting a bootmode state property and forgetting about it a bootmode state property expires if the host is not reset within 10 minutes of the bootmode state property being set Related Information m Reset the Host on page 4 m Managing Host Boot Mode on page 4 Manage the Host s Boot Mode LDoms Configuration Using the CLI e Atthe gt prompt type gt set HOST bootmode config configname where the config property takes a configname value such as a named logical domain configuration downloaded to the SP using the Logical Domains software For example if you have created a logical domain configuration called ldm set1 gt set HOST bootmode config ldm set1 To return the boot mode config to the factory default configuration specify factory default For example gt set HOST bootmode config f
51. r that command Reboots ALOM CMT The y option enables you to skip the confirmation question help reset Sets the type of shell to shelltype where shelltype is default or alom Logs out from an ALOM CMT shell session exit Sets the ioreconfiguration parameter to value where value is true false or next boot Comparable ILOM Command reset SP script SP set SP users username cli_mode shelltype set HOST ioreconfigure value ALOM CMT Compatibility Shell 59 Related Information m Create an ALOM CMT Compatibility Shell on page 50 60 ILOM 2 0 Supplement for Sun SPARC Enterprise
52. rk start SP console No equivalent in ILOM set HOST break send_break_action set HOST send_break_action dumpcore set HOST bootmode property value where property is state config or script load source t tp ipaddr pathname 56 ILOM 2 0 Supplement for Sun SPARC Enterprise TABLE ALOM CMT Shell Status and Control Commands Continued ALOM CMT Command Summary Comparable ILOM Command reset c reset y c reset f reset d reset d f reset d n reset d f n powercycle y f powercycle y powercycle f Attempts to gracefully reset the system If that fails this option forcefully reset the system Forcfully resets the system Attempts to gracefully reset the control domain If that fails this option forcefully reset the control domain Forcefully resets the control domain When resetting the control domain this option may automatically boot this is the default behavior when the auto boot option is not specified When resetting the control domain this option does not automatically boot and stays at the OpenBoot ok prompt This option overrides all reboot variables and stops the control domain at the OpenBoot ok prompt after host reset The auto boot option remains unchanged thus subsequest reset commands automatically reboot host if the auto boot option is set to true poweroff followed by poweron The f option forces
53. rning Error Conditions on page 8 Manage the Host 9 m Manage Host Information Using the Web Interface on page 11 V Display the Host s POST Version Using the CLI The HOST post_version property displays information about the version of POST on the host To view the current setting for this property type gt show HOST post_version Related Information m Viewing Host Information and Setting System Policy Concerning Error Conditions on page 8 m Manage Host Information Using the Web Interface on page 11 Vv Specify Host Behavior When the Watchdog Timer Expires Using the CLI Use the HOST autorestart property to specify how ILOM should handle expiration of the Solaris watchdog timer e To set this property type gt set HOST autorestart value where values can be m none ILOM takes no action other than to issue a warning m reset ILOM attempts to reset the system when the Solaris watchdog timer expires the default m dumpcore ILOM attempts to force a core dump of the OS when the watchdog timer expires Related Information m Viewing Host Information and Setting System Policy Concerning Error Conditions on page 8 m Manage Host Information Using the Web Interface on page 11 10 ILOM 2 0 Supplement for Sun SPARC Enterprise Vv Specify Host Behavior When an Error Is Discovered During Diagnostics Using the CLI Use the HOST autorunonerror property
54. ru c data showfru g lines FRU removefru y FRU s d The c option enables you to store set SYS customer_frudata information such as inventory codes data on all FRUs in a system in a host server Displays information about the FRUs No equivalent in ILOM Prepares a FRU for example a power supply for removal The y option enables you to skip the confirmation question set SYS PSO prepare_to_remove_action true 58 ILOM 2 0 Supplement for Sun SPARC Enterprise TABLE ALOM CMT Command Summary ALOM CMT Shell Automatic System Recovery ASR Commands Comparable ILOM Command enablecomponent asr key disablecomponent asr key showcomponent asr key Removes a component from the asr db blacklist Adds a component to the asr db blacklist Displays system components and their test status ASR state set SYS component component_state enabled set SYS component component_state disabled show SYS component component_state clearasrdb Removes all entries from the asr db No equivalent in ILOM blacklist TABLE ALOM CMT Shell Miscellaneous Commands ALOM CMT Command help command resetsc resetsc y userclimode logout setsc sys_ioreconfigure value Summary Displays a list of all ALOM CMT commands with their syntax and a brief description of how each command works Specifying a command name as an option enables you to view the help fo
55. s il ne contient ni ne repr sente aucun engagement de quelque type que ce soit de la part de Fujitsu Limited ou de Sun Microsystems Inc ou des soci t s affili es eo ei SY Adobe PostScript Ce document et le pr duit et les technologies qu il d crit peuvent inclure des droits de propri t intellectuelle de parties tierces prot g s par copyright et ou c d s sous licence par des fournisseurs Fujitsu Limited et ou Sun Microsystems Inc y compris des logiciels et des technologies relatives aux polices de caract res Par limites du GPL ou du LGPL une copie du code source r gi par le GPL ou LGPL comme applicable est sur demande vers la fin utilsateur disponible veuillez contacter Fujitsu Limted ou Sun Microsystems Inc Cette distribution peut comprendre des composants d velopp s par des tierces parties Des parties de ce produit pourront tre d riv es des syst mes Berkeley BSD licenci s par l Universit de Californie UNIX est une marque d pos e aux Etats Unis et dans d autres pays et licenci e exclusivement par X Open Company Ltd Sun Sun Microsystems le logo Sun Java Netra Solaris Sun StorageTek docs sun com OpenBoot Sun VTS Sun Fire SunSolve CoolThreads J2EE et Sun SPARC Enterprise sont des marques de fabrique ou des marques d pos es de Sun Microsystems Inc ou ses filiales aux Etats Unis et dans d autres pays Fujitsu et le logo Fujitsu sont des marques d pos es de Fujitsu Limite
56. s up the user database to the SCC This is the default value m disabled No backup m For example if you want the local user database on ILOM to be backed up type gt set SP policy BACKUP USER _DATA enabled Manage the Service Processor 25 Related Information m Manage Configuration Policy Settings Using the Web Interface on page 27 Vv Specify Host Power On Policy Using the CLI Use the SP policy HOST_LAST_POWER_STATE property to control the behavior of the server after an unexpected power outage When external power is restored the ILOM service processor starts to run automatically Normally the host power is not turned on until you use ILOM to turn it on ILOM records the current power state of the server in non volatile storage If the HOST_LAST_POWER_STATE policy is enabled ILOM can restore the host to the previous power state This policy is useful in the event of a power failure or if you physically move the server to a different location For example if the host server is running when power is lost and the SP policy HOST_LAST_POWER_STATE property is set to disabled the host server remains off when power is restored If the SP policy HOST_LAST_POWER_STATE property is set to enabled the host server restarts when the power is restored 1 At the gt prompt type gt set SP policy HOST LAST POWER_STATE enabled where the value for this property is one of the following m en
57. stem 31 v View Power Management Properties Using the Web Interface 32 Managing Network Access 32 v Disable or Re Enable Network Access to the SP Using the CLI 33 v Display the DHCP Server s IP Address 33 Managing SSH Server Settings 34 Change the Type of SSH Keys Using the CLI 34 Generate a New Set of SSH Keys Using the CLI 35 Restart the SSH Server Using the CLI 35 Enable or Disable the SSH Service Using the CLI 35 4 4 a Manage SSH Server Settings Using the Web Interface 36 Managing Virtual Keyswitch Settings 39 v Control the Virtual Keyswitch Using the CLI 39 v Control the Virtual Keyswitch Using the Web Interface 40 v Display Component Status Using the CLI 41 IPMI Sensor Reference 43 Sensors on Sun SPARC Enterprise T5120 and T5220 44 Indicators on the Sun SPARC Enterprise T5120 and T5220 48 ALOM CMT Compatibility Shell 49 Commit ILOM Network Configuration Properties 49 v Create an ALOM CMT Compatibility Shell 50 ILOM and ALOM CMT Command Comparison 52 Contents vii viii ILOM 2 0 Supplement for Sun SPARC Enterprise Preface The Integrated Lights Out Manager ILOM 2 0 Supplement for SPARC Enterprise T5120 and T5220 Servers contains information about the Integrated Lights Out Manager ILOM service processor SP The SP enables you to remotely manage and administer your servers You should be an experienced system administrator with a knowledge of UNIX commands Using UNIX Commands This document might not c
58. t produces output similar to the following gt show components Target Property Value SYS MB RISER0 component_stat Enabled XAUIO SYS MB RISERO component_stat Enabled PCIEO SYS MB RISERO component_stat Enabled PCIE3 SYS MB RISER1 component_stat Enabled PCIET SYS MB RISER1 component_stat Enabled PCIEA SYS MB RISER2 component_stat enabled PCIE2 SYS MB RISER2 component_stat Enabled PCIE5 SYS MB GBEO component_s Enabled SYS MB GBE1 component_s Enabled SYS MB PCIE component_s Enabled SYS MB PCIE I0 component_s Enabled USB SYS MB SASHBA component_stat Enabled Managing Virtual Keyswitch Settings 41 42 ILOM 2 0 Supplement for Sun SPARC Enterprise IPMI Sensor Reference Your server includes a number of IPMI compliant sensors and indicators Sensors measure voltages temperature ranges and detection of when components are installed and removed Indicators such as Light Emitting Diodes LEDs notify you of important server conditions such as when service is required This appendix contains the following topics m Sensors on Sun SPARC Enterprise T5120 and T5220 on page 44 m Indicators on the Sun SPARC Enterprise T5120 and T5220 on page 48 43 44 Sensors on Sun SPARC Enterprise T5120 and T5220 TABLE Sensors on Sun SPARC Enterprise T5120 and T5220 Servers Name Path Description Bn CHn Dn PRSNT SYS MB CMPO BRn CHn Dn Branch 0 3 Channel 0 1 PRSNT
59. the Diagnostics Mode Using the CLI Use the HOST diag mode property to control whether diagnostics are enabled and to specify which diagnostic mode is enabled e Atthe gt prompt type gt set HOST diag mode value where value is one of the following off Do not run any diagnostics normal Run diagnostics the default value service Run service technician diagnostics equivalent to using the preset values of HOST diag trigger all resets HOST diag verbosity and HOST diag level max Setting HOST diag mode service has the same effect as issuing the set SYS keyswitch_state diag command Related Information m Managing Host Diagnostics on page 12 m Manage Diagnostics Settings Using the Web Interface on page 15 YV Specify Diagnostic Trigger Conditions Using the CLI Use the HOST diag trigger property to control the conditions under which POST runs if diagnostics are enabled e Atthe gt prompt type gt set HOST diag trigger value where value is one or a combination supplied within quote marks of the following user reset Run diagnostics when the system is reset error reset Run diagnostics when the system takes a fatal error that requires the system to reset itself to recover power on reset Run diagnostics when the system is powered on all resets Run diagnostics at any server reset Manage the Host 13 m none Skip diagnostics For example
60. to specify whether the host should continue to boot after system diagnostics have discovered an error To set this property type gt set HOST autorunonerror value where value is one of the following m false The system stops booting after an error has been discovered the default m true The system attempts to continue booting after an error has been discovered Related Information m Viewing Host Information and Setting System Policy Concerning Error Conditions on page 8 m Manage Host Information Using the Web Interface on page 11 V Manage Host Information Using the Web Interface This procedure describes how to view and configure several kinds of host information ILOM provides several ways to view or configure host control features There are six aspects to host control m MAC address m OpenBoot version m POST version m HOST status m Auto Run On Error m Auto Restart Policy 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Remote Control gt Host Control Manage the Host 11 Sun TM Integrated Lights Gut Manager Mozilla Firefox File Edit View History Bookmarks Tools Help Role User Administrator root SP Hostname SUNSP00144FADACD9 Sun Integrated Lights Out Manager Remote Power Control Diagnostics HostControl Boot Mode Settings Keyswitch Host Control View and config
61. ts AAAAB2NzaClyc 2ERAAABIWARAIEAqi fhr 3ExaZ TyDa gda 2y 312vhKe 6bvVhYSmkkt iqmRWex2 jw2BHAkEMF2SRPH245p SEOCLIcvi X2FSyARG wu2nR1x2 KR6PCorU 3VacQEHaxqnF 66m lt 0h6 35DughJ Jn 3BPAB GT ARhCiMye0 373 LDA j Fer 7 98aSwNB Generate DSA Key 4c 43 1b 45 13 ac 54 a3 56 e7 f2 61 2e 43 16 cb 1024 bits AAAAB3NzaCLke 3MAAACBAK 44 HGDII zeHtvaA 3r ORTKST 3h3jbKAtZBAZi TUKCOhWGNagi z9 PudObYbRgShasBalv H1m Kuyc P1H2018nRLRbvNnCp LSahB41FQAbPZ4EZy i vx PpB 0 K13jSRgHhlpzICkK9Ibp uyCazpF f 2FUveExnpnaW9QPxD3t AAAAFOCaevaNZYB2P5 Se MHZKyo 5 4 WQAAAIBCAv Akghhb0 i2zKva iHTS19MN4SPhHSPxWFEDE dni TUGHA I e10D5601 pSpldaJ68Vj olgCvYUUgHGhF lv Ek 26AWFEk kavvahUDGUS hAvSt 70Lh674LLHM2290CT 3nTjWwIa8Pyw9exD0U 45cG9 Yiu PDgL 2 7pAgErwgyAAAIBaxpOc t aMUHHEcrjOUKx eTB BRY xhd aRUAdunuD2Hgv1 3CDoII qHOHzVH5AAKDHVpOWT7 Z JAGS BBeg804V7DsgF SuDwjEmvtBARP1j 1jMyRv GAE GuyPLLOid az RwcjFYh2WA ut eOACyyWDia J5 33H zLelimazxW7D 3 Select an action from the SSH Server pulldown menu m Enable the SSH server m Disable the SSH server ILOM 2 0 Supplement for Sun SPARC Enterprise m Restart the SSH server 4 Click Generate RSA Key or Click Generate DSA Key to generate a new key type and a new key If you have generated a new key you must restart the SSH server for the new key to take effect Note When the SSH server is restarted or disabled any CLI sessions running over SSH will be terminated immediately Related Information
62. ujitsu Limited and Sun Microsystems Inc and their applicable licensors if any The furnishing of this document to you does not give you any rights or licenses express or implied with respect to the product or technology to which it pertains and this document does not contain or represent any commitment of any kind on the part of Fujitsu Limited or Sun Microsystems Inc or any affiliate of either of them This document and the product and technology described in this document may incorporate third party intellectual property copyrighted by and or licensed from suppliers to Fujitsu Limited and or Sun Microsystems Inc including software and font technology Per the terms of the GPL or LGPL a copy of the source code governed by the GPL or LGPL as applicable is available upon request by the End User Please contact Fujitsu Limited or Sun Microsystems Inc This distribution may include materials developed by third parties Parts of the produet may be derived from Berkeley BSD systems licensed from the University of California UNIX is a registered trademark in the U S and in other countries exclusively licensed through X Open Company Ltd Sun Sun Microsystems the Sun logo Java Netra Solaris Sun StorageTek docs sun com OpenBoot Sun VTS Sun Fire SunSolve CoolThreads J2EE and Sun SPARC Enterprise are trademarks or registered trademarks of Sun Microsystems Inc or its subsidiaries in the U S and other countries Fujitsu an
63. updating any of the flash devices or setting HOST send_break_action 39 Related Information m Control the Virtual Keyswitch Using the Web Interface on page 40 V Control the Virtual Keyswitch Using the Web Interface You can use the web interface to control the virtual keyswitch position of the system 1 Log in to the ILOM web interface as Administrator root to open the web interface 2 Select Remote Control gt Keyswitch Sun 7M Integrated Lights Out Manager Mozilla Firefox File Edit View History Bookmarks Tools Help ABOUT Role User Administrator root SP Hostname SUNSPO0144FAOACDS Sun Integrated Lights Out Manager System Information System Monitoring x User Management Remote Power Control Diagnostics Host Control Boot Mode Settings Keyswitch Keyswitch Configure keyswitch Keyswitch Normal 7f EE 3 Select the Keyswitch state value 4 Click Save Related Information m Control the Virtual Keyswitch Using the CLI on page 39 40 ILOM 2 0 Supplement for Sun SPARC Enterprise V Display Component Status Using the CLI Type the show components Command The show components command is a shortcut for the following CLI command string gt show o table level all SYS component_state The alias produces the same output as the above command Thus it enables users to restrict the table output to a single property below each target For example i
64. ure the host control information Auto Run on Error determines whether the host should continue to boot in the event of a non fatal POST error Auto Fi what action the Service Processor should take when it discovers the host is hung MAC Address 00 14 4t aD ac d0 OBP Version OBP 4 x build_17 PROTOTYPE BUILD 2008 01 29 20 42 stacie obp 0 POST Version POST 4 x 0 batoka build_17 2008 01 29 20 45 Post Status Solaris running Auto RunOnError False gt Auto Restart Policy Fieset 3 View the MAC address 4 View the OpenBoot version 5 View the POST version 6 Select a value for Auto Run On Error if desired 7 Select a value for Auto Restart Policy if desired 8 Click on Save Related Information m Viewing Host Information and Setting System Policy Concerning Error 12 Conditions on page 8 Managing Host Diagnostics Use the diagnostic control properties to specify how ILOM controls the diagnostics of the host server ILOM uses the following diagnostic system interface property m Change the Diagnostics Mode Using the CLI on page 13 ILOM 2 0 Sup Specify Diagnostic Trigger Conditions Using the CLI on page 13 Specify the Level of Diagnostics Using the CLI on page 14 Choose the Amount of Verbosity in Diagnostic Output Using the CLI on page 14 Manage Diagnostics Settings Using the Web Interface on page 15 plement for Sun SPARC Enterprise Y Change
65. want to change 4 Select an Action value to apply the Action enable or disable you have chosen Related Information m Manage Configuration Policy Settings Using the Web Interface on page 27 28 Displaying Power Management Metrics This section describes using ILOM to view the server s power metrics Power Management Terminology on page 29 View Power Management Properties Using the CLI on page 30 View the Total Power Consumed By the System on page 31 View Power Management Properties Using the Web Interface on page 32 ILOM 2 0 Supplement for Sun SPARC Enterprise Power Management Terminology TABLE Power Management Terminology Term Actual power The input power measured in watts This is the actual power consumed by all the power supplies in the system Permitted power The maximum power that the server will permit to be used at any time Available power The input power capacity in watts Available power is defined as the sum of all the power that the power supplies can provide Power policy The setting that governs system power usage at any point in time Four power policies are supported Performance Elastic Regulated and Siesta The characteristics of each policy setting are as follows e Performance The system is allowed to use all the power that is available e Elastic The system power usage is adapted to the current utilization level For example power up or down just

2.0 Supplement for SPARC Enterprise T5120 and T5220 Servers

Contents

Download Pdf Manuals

Related Search

Related Contents