Home

INSTRUCTIONS FOR USE

image

Contents

1. porizer is sent in to them Any attempt by the customer to re place the battery by him herself is potentially dangerous and leads to loss of any claims under the warranty and exempts Storz amp Bickel from any liability Mains operation The MIGHTY Vaporizer can also be operated with the power adapter or 12 volt car adapter even when the batteries are completely discharged Proceed as described in Section 7 1 Charging the battery and then con nect up the vaporizer Automatic switching off The automatic switching off is used to save battery capacity so that the va porizer can be used as long as pos sible without charging The device switches off automatically one minute after the last press of a but ton or the last application The switch ing off of the vaporizer is indicated by a short vibration A short press of the ON OFF switch during operation can reset the automatic switching off to one minute 7 2 Heating up Switch on the device heating up the vaporizer with full filling chamber and cooling unit mounted is recommend ed To do this press the orange ON OFF switch for at least one second The vaporizer responds with a short vibration The vibration does not take place if there is a fault 7 COMMISSIONING AND OPERATION The display signals that heating is in progress by showing the set and ac tual temperatures Set the desired temperature using the temperature buttons to the left
2. The aromas and fragrances from the plant materials listed below may be vaporized Plant name Botanical name Eucalyptus Hops Chamomile Lavender Lemon balm Sage Thyme Eucalyptus globulus Humulus lupulus Matriarca chamomilla Melissa officinalis Salvia officinalis Thymus vulgaris WARNING Please consult your doctor or pharmacist if you have any medical concerns It is possible that some plants may cause allergic reac tions for the user If this occurs it is urgently recommended to refrain from further use of such plants Only use the plant parts which are found in this list and which have been verified according to the regulations of the European or any other pharma copoeia with regard to genuineness purity and pathogenic germs You can purchase such plants or plant parts in pharmacies Lavandula angustifolia Any other use is inappropriate and po tentially dangerous Information and up to date news about plants suitable for vaporization will be published on www storz bick el com Portion of the Temperature plant used setting 130 C 266 F 154 C 309 F 190 C 374 F the leaves C 130 C 266 F the cones the blossoms the blossoms the leaves the leaves the herb 142 C 288 F 190 190 374 374 C F C F It is important to observe the following instructions in order to set the MIGHTY Vaporizer with the plant material in the best
3. 78532 Tuttlingen Germany 12 C DECLARATION OF CONFORMITY The devices comply with the following EC Directives gt DIN EN 60 335 gt DIN EN 60 950 gt Electromagnetic Compatibility 2004 108 EG 13 WARRANTY LIABILITY REPAIR SERVICE Manufacturer s representations and warranties These representations and warranties are applicable to all end customers the Customers and each individu ally a Customer purchasing prod ucts the Products sold by Storz amp Bickel GmbH amp Co KG or Storz amp Bickel America Inc the Company Warranty and limitations Company warrants solely to the origi nal purchaser of the Products that for the warranty period as defined below the Products will be free from defects in materials and workmanship under normal use and will conform to Company s published specifications of the Products Notwithstanding the foregoing Company retains its right to deviate from its published specifica tions due to the latest innovations and improvements in function and design of the Products The foregoing war ranty is subject to the proper storage transportation and use of the Prod ucts and does not include defects due to normal wear and tear or deteriora tion including but not limited to de fects in batteries screens and similar parts subject to wear and tear Upon delivery Customer shall imme diately inspect the Products for con formity and visibl
4. Customer may also have other rights that vary by state country or other jurisdiction The information contained in these Instructions for Use are based on our experience and is current and com plete to the best of our knowledge and ability at the time of printing Storz amp Bickel GmbH amp Co KG does not ac cept responsibility for errors omis sions or incorrect interpretations of the contents or any information herein Users are advised that all applications and uses of the Products described must conform to applicable local laws ordinances and codes and users of the Products are advised that they are solely responsible for determining and assuring the suitability of any Product for the intended application Repair service After the warranty period has expired or if there are any defects which are not covered under warranty our ser vice department will repair the defect after providing the Customer with an estimate and receiving the payment Copyright No part of this document may be repro duced in any form by printing photo copying or other means or processed duplicated or circulated electronically without the prior written approval of Storz amp Bickel GmbH amp Co KG www storz bickel com STORZ amp BICKEL GMBH amp CO KG Rote Strasse 1 78532 Tuttlingen Germany Tel 49 74 61 96 97 07 0 Fax 49 74 61 96 97 07 7 eMail info storz bickel com STORZ amp BICKEL AMERICA INC 1078 60th St
5. Suite A Oakland CA 94608 phone 510 451 1553 fax 510 451 2053 email america storz bickel com CE by STORZ amp BICKEL GmbH amp Co KG MAL 30 202 07 2014 sec_EN Subject to alterations All rights reserved
6. and right of the set temperature display Heating up the 7 3 Temperature setting Set temperature display Minus temperature button Battery charging display The temperature can be set between 40 C and 210 C 104 F and 410 F see Section 4 Overview of plants When you press the plus button the set value is increased and when you press the minus button the set value is decreased When you briefly tap on the plus or minus button the set values are increased or decreased respectively in 1 degree increments If you keep the plus or minus button pressed the set values start running continuously in the corresponding di rection am ce vege A a heat exchanger can take up to two minutes depending on the set temper ature and battery charge level Once the set temperature is reached this is signaled by a short double vibration Actual temperature display Plus temperature button The current acutal temperature can be read from the upper line of the display Fahrenheit Celsius If you simultaneously tap on the plus button and the minus button the dis play changes from degree Celsius to degree Fahrenheit and vice versa 8 FILLING THE FILLING CHAMBER Turn the cooling unit with a 90 rotation plant material too much so that the counterclockwise in order to remove it airflow is not unnecessarily impeded from the vaporizer Remove any excess plant material left around the filling apertur
7. are damaged The charging time for the battery de pends on how old it is and how high the charge is on starting it takes about two hours if the battery is com pletely discharged Connect the power adapter to the charging socket of the vaporizer and then plug into a suitable power socket Note When the power adapter is plugged into the mains the display lights up for a moment and the vapor izer vibrates for a short time This is a functional check and indicates that the charging operation has started The battery charging display lights up and starts to flash i e the battery is being charged As soon as the battery is fully charged the battery charging display stops flashing and indicates the charge level full all six fields Once the charging operation is com plete first disconnect the power adapter from the mains socket and then unplug from the vaporizer 7 COMMISSIONING AND OPERATION The battery can also be charged via the optional 12 volt car adapter Connect the 12 volt car adapter to the power socket of the vaporizer and then plug into the cigarette lighter or suitable 12 V sock et Charge and complete the operation in the same way as with the power adapter see Section 7 1 Charging the battery Connecting the vaporizer using the power adapter or 12 volt car adapter Batteries are specially as sembled consumable items that can only be replaced by Storz amp Bickel when the MIGHTY Va
8. herb mill Upper cap Plug Bowl Lower cap To fill the filling aid remove the up per cap and fill the bowl incl plug with ground plant material Replace the up per cap and close it Filled filling aid upper cap removed 8 FILLING THE FILLING CHAMBER 8 2 Filling the filling chamber us ing the filling aid Remove the cooling unit from the va porizer and remove any residues that may be in the filling chamber The fill ing chamber tool can be a help in do ing this Remove the lower cap of the filling aid by turning counterclockwise Place the filling aid on the vaporizer and at tach by turning it clockwise Remove the upper cap from the filling aid Pull the plug and use it to fill a portion of plant material through the central opening into the filling chamber Make sure that the filling chamber is not overfilled see Section 8 Filling the filling chamber Fill the filling aid to the lower rim see drawing to the right The lower rim of the filling aid must be above the top level of the plant material Overfilling leads to clogging of the screens and can make inhaling more difficult Filling the filling chamber with the filling aid The lower rim of the filling aid must be above the top level of the plant material Then re insert the plug into the central opening and screw on the upper cap of the filling aid Unscrew the filling aid with a 90 rotation and screw on the
9. switch for at least one sec ond The vaporizer acknowledges the switching off with a short vibration Pull the power adapter if it is used from the socket and disconnect from the vaporizer Allow the vaporizer and the power adapter to cool down before they are packed away 10 DISASSEMBLING CLEANING AND ASSEMBLING When the vapors are cooled it is in evitable that a small fraction is con densed on the internal surfaces of the cooling unit The component parts of the cooling unit including the mouthpiece must be thoroughly cleaned on a regular basis to guarantee proper operation and pure flavor For hygienic reasons it is also neces sary to clean these components when the vaporizer is to be used by a differ ent person The condensate can be sticky The cooling unit can be dis mantled more easily when it first warmed up Product overview of the MIGHTY Cooling Unit The cooling unit consists of Cap ock ie na Mouthpiece Mouthpiece seal ring Cooling unit cap Base seal ring peee ae small Cooling unit base Upper screen Base seal ring large 10 DISASSEMBLING CLEANING AND ASSEMBLING 10 1 Disassembling and reassem bling the MIGHTY Cooling Unit Turn the cooling unit with a 90 rotation counterclockwise in order to remove it from the vaporizer Pull out the mouthpiece from the cool ing unit cap rotate slightly back and forth while doing this and pull off the m
10. Canadian customers under this warranty shall be directed to Storz amp Bickel America Inc 1078 60th Street Suite A Oakland CA 94608 Phone 510 451 1553 Fax 510 451 2053 email service america storz bickel com All requests and notices from all other Customers under this warranty shall be directed to Storz amp Bickel GmbH amp Co KG Rote Strasse 1 78532 Tuttlingen Germany Phone 49 7461 969707 0 Fax 49 7461 969707 7 email service storz bickel com The warranty set forth in section Warranty and limitations is made in lieu of all other warranties whether express or implied rights or condi tions and Customer acknowledges that except for such limited warranty the Products are provided as is Company specifically disclaims with out limitation all other warranties ex press orimplied of any kind including without limitation the implied warran ties of merchantability and fitness fora particular purpose non infringement and those warranties arising from a course of performance a course of dealing or trade usage Liability Handling of these Products is to be as stated in the Instructions for Use The user accepts full liability for improper handling and usage of these Products The intended application only refers to the plants named by us Repair of these Products is only to be done by us or one of our authorized cus tomer services Only original Storz amp Bickel parts are
11. HTY cannot be Please ensure that the MIGHTY s battery is charged or switched on the vaporizer is connected via the power adapter toa functioning mains socket If the vaporizer still does not work then the device is faulty In this case disconnect from the mains without delay and get in touch immediately with our Service Center The display of the MIGHTY shows ERR 001 The display of the MIGHTY shows ERR 002 The display of the MIGHTY shows ERR 003 The display of the MIGHTY shows ERR 004 Battery temperature is too high Allow the vaporizer to cool down Battery temperature is too low Warm up the vaporizer The power adapter is not suitable Please use an original Storz amp Bickel power adapter or 12 volt car adapter The vaporizer is faulty In this case disconnect from the mains without delay and get in touch immediately with our Service Center If the preceding tips do not yield the desired results or for any other defects or problems not mentioned here please unplug the power adapter and contact our Ser vice Center immediately Do not open the vaporizer or the power adapter Without special tools and specialized knowledge any attempt to open either of these devices will cause damage to them Such an attempt will invalidate the warranty claim Do not try to remedy the defect your self Contact our Service Center di rectly Disposal If the vaporizer or the power adapter
12. STORZ amp BICKEL GMBH amp CO KG INSTRUCTIONS FOR USE Read carefully before using the device and save these instructions INSTRUCTIONS FOR USE ENGLISH Table of contents 0 00 00 page 1 Product overview Scope of delivery eseese 4 2 Safety recommendations Explanation of symbols 6 Ke Ramm 1 190 lt 0 KO ep E E ET 10 4 Overview of plants scssi 10 5 Factors influencing vaporization sssini 12 6 The MIGHTY Vaporizer cecceeeeeeeeeeeeeeeeeeee 12 7 Commissioning and operation cee eee 15 7 4 Charging the battery eseese 15 T2 HEINU drein eae ceases 16 8 Temperature Setting sssrini 17 8 Filingth filing chamber smesssannie ene 18 g RINGA on anne ee ees 19 8 2 Filling the filling chamber using the tiling aid naisien 20 9r AppheatO yi in sne eRe eo ee OR 21 10 Disassembling cleaning and assembling 22 10 1 Disassembling and reassembling the MIGHTY Cooling Unit 0 ee 23 10 2 Cleaning the MIGHTY Cooling Unit 25 11 Technical specifications sssrinin 26 12 CE Declaration of conformity eee eee 27 13 Warranty Liability Repair Service cece 28 1 PRODUCT OVERVIEW MIGHTY VAPORIZER Scope of delivery Instructions for Use Power adapter an p th Herb mill Cleaning brush Fillingaid Liquid pad 1 set of spare seal rings 3 pc Spare screens optional accessory 12 volt car ada
13. ammable objects such as curtains tablecloths or paper Keep the vaporizer and power adapter away from pets e g hamsters mice and other animals which could damage the insulation of the power adapter cord The vaporizer and power adapter may only be repaired by our Ser vice Center Incorrectly performed repairs without the use of original spare parts can prove dangerous to the user Danger to life when opening the power adapter as live components and connections are exposed The vaporizer must never be repaired or transported when the power adapter is plugged in The vaporizer and power adapter must never be operated when the power adapter cord is faulty Do not put any objects into the openings of the device gt Do not leave the vaporizer unat tended while it is being operated After use switch off the heater The ventilation slots and the hot air outlet of the vaporizer may not be closed obstructed or blocked while the device is being used nor while it is cooling down A Caution Hot surfaces gt gt gt gt gt The filling chamber is made of metal do not touch it when it is hot Before cleaning disconnect the power adapter from the socket The vaporizer and the power adapter should be cleaned only with a dry cloth or a damp cloth if absolutely necessary Never im merse the vaporizer or the power adapter in water or any other liquid nor clean it w
14. e defects Customer shall give Company immediate written notice of any non conformities or vis ible defects regarding the Products and contact Company in writing con cerning return or repair as the case may be Warranty Customer shall notify Company in writing of any defects of the Products Company s sole obligation under the foregoing warranty is at Company s option to repair or correct any such covered defect or to replace or ex change the Product provided Cus tomer has returned the Products with a copy of the original invoice to the Company or one of its author ized repair shops at his own cost Any repaired corrected replaced or exchanged Products shall be subject to the warranty set forth in section Warranty and limitations follow ing their repair correction replace ment or exchange If Company has received notification from Customer and no defects of the Product could be discovered Customer shall bear the costs that Company incurred as a result of the notice The warranty period for the MIGHTY Vaporizer begins on the date when the Product is physically delivered to the Customer s site and is valid for twen ty four 24 months thereafter Company does not authorize any per son or party to assume or create for it any other obligation or liability in con nection with the Products except as set forth herein 13 WARRANTY LIABILITY REPAIR SERVICE All requests and notices from U S and
15. e so that it is clean and allows the cooling unit to be fitted If the filling chamber is only partially filled then the vapori zation material may shift around the hot air then bypasses the vaporization material so that no va porization can occur Removal of cooling unit with mouthpiece Always fill the filling chamber com pletely up to the plastic rim with ground plant material Do not compress the Filling chamber properly filled If the filling chamber is not to be filled completely it is recomended to place the included liquid pad over the herbs and then mount the cooling unit on the vaporizer Filling chamber partially filled with liquid pad placed on top 8 FILLING THE FILLING CHAMBER Take care that the screens are not obstructed with plant ma terial To guarantee optimal results we recommend cleaning the screens after each vaporization cycle with the enclosed cleaning brush The upper screen especially can be come clogged with plant material and so make inhaling difficult In this case remove the screen as in Section 10 Disassembling cleaning and as sembling and clean or insert a new screen Then re mount the cooling unit by ro tating it clockwise through 90 8 1 Filling aid The filling aid supplied with the unit makes filling the filling chamber an easy and clean operation and serves as a magazine for transporting and storing plant material already ground in the
16. is irreparably damaged please do not simply throw them away As they are made of high quality completely recy clable component parts they should be brought to a material recycling center in your town or sent to our Ser vice Center for disposal 7 COMMISSIONING AND OPERATION Do not leave the device unat tended during operation Place the MIGHTY Vaporizer only on ahard heat resistant flat sta ble surface never on soft surfaces or flammable material Check whether the power adapter supply voltage cor responds to the voltage rating listed on the power adapter The power adapter cord and power adapter must be in perfect condition Connect the power adapter only to a properly in stalled socket 7 1 Charging the battery Explanation of the battery charging display The battery charging display shows a battery symbol with six fields indi cating the charging status If the bat tery is almost discharged the battery frame starts to flash if fully charged the frame and all six fields are visible The number of status fields visible depends on the extent of the battery charge Battery charging display Check the housings of the va porizer and the power adapt er for signs of damage each time before using or charing The battery charge of the new product has a level of up to 80 Fully charge before using for the first time The vaporizer may not be charged and neither vaporizer nor power adapter used if these
17. ith direct jets of water or steam The vaporizer and the power adapter must not be used in damp or wet conditions Do not expose the vaporizer or the power adapter to rain Do not use in the bathroom or above water Never touch the vaporizer or power adapter with wet or damp parts of the body Never operate the vaporizer or power adapter when it is wet or damp If the vaporizer or the power adapter gets wet it must be checked by our Service Center for damage to electrical components Do not use in an atmosphere with risk of explosion or ignition Never allow the vaporizer or the power adapter to be used by children or unqualified persons Only use original Storz amp Bickel accessories and spare parts ao 2 SAFETY RECOMMENDATIONS The manufacturer is not re sponsible for any damage or personal injury caused by inappropriate incorrect or irre sponsible use 3 INTENDED USE The MIGHTY Vaporizer releases fra grances or aromas from the herbs and other plant materials listed below These aromatic substances are re leased through vaporization by heated air and may be directly inhaled The device may only be used with the recommended vaporizing media The use of other substances can present a health risk The MIGHTY Vaporizer is notintended for medical therapeutic purposes 4 OVERVIEW OF PLANTS Below is an overview of the plants that are suitable for vaporization in the MIGHTY Vaporizer
18. jury or ma terial damages for which the manufacturer cannot be held respon sible Application and operation This vaporizer was developed for vaporizing the plant mate rials listed in the plant over view as well as their extracts Any other use is inappropriate and poten tially dangerous The user should always follow the instructions listed here for use and maintenance If you have any concerns or if there are any problems immediately switch off the vaporizer and pull the power adapter cord if used from the sock et Do not try to remedy the defect yourself Contact our Service Center directly After using the vaporizer and power adapter allow them to cool down be fore placing them in storage Storage Store the vaporizer and the power adapter in a dry place protected against the effects of weather and out of the reach of children or unqualified persons In case of problems If the power adapter has been in use unplug it at the socket and ensure that no one can connect the vaporizer to the mains supply again without this being noticed Before any maintenance work is done the vaporizer has to be switched off and the power adapter unplugged from the power supply Put the vaporizer in the original pack aging or pack it properly in other pack ing material and send it to our Service Center 6 THE MIGHTY VAPORIZER Possible faults Troubleshooting Problem Possible cause remedy MIG
19. lower cap again Then re mount the cooling unit by rotating it clockwise through 90 9 APPLICATION Mount the cooling unit on the vaporizer and heat up This ensures that both the filling chamber and the material to be vaporized are preheated and the vaporizing can begin as soon as the heating process is completed Caution Hot surface After using the MIGHTY Va porizer do not touch any com ponents of the filling chamber until they have cooled down again Once the vaporizer has reached the set temperature set and actual tem peratures are the same also signaled by a short double vibration and the mouthpiece is folded out the inhaling process can then begin Using the MIGHTY Vaporizer Take the mouthpiece between the lips and inhale slowly and evenly for sev eral seconds Please note the following about vapor generation the more intense the va pors the greater the impairment of the flavor Avery high intensity density of the vapor can lead to irrita tion of the respiratory pas sages from the concentration of the aromas and fragrances In this case the temperature should be lowered so that the intensity of the vapors is reduced Inhale only half of air you can normally manage Hold your breath for a few seconds and exhale slowly It is advisable to delib erately concentrate on your breathing process After vaporization turn offthe MIGHTY Vaporizer To do this press the orange ON OFF
20. lts it is advisable to replace the vaporization material before this point 6 THE MIGHTY VAPORIZER Unpacking The box contains all components as well as the Instructions for Use Keep the Instructions for Use for future ref erence Remove the vaporizer and the acces sories from the box Immediately after unpacking check whether the vapor izer the accessories the power adapter and the device plug are all included in the delivery and work properly If you notice any defects in form the seller or the delivery agent immediately The packing material plastic bags boxes etc must be kept out of the reach of chil dren as it is a potential source of dan ger Please dispose of the packing mate rial in a proper and environmentally friendly manner We recommend keeping the original packaging in case it is required later transport Storz amp Bickel Service Center etc 6 THE MIGHTY VAPORIZER Power connection Before connecting up the vaporizer make sure that the information given on the power adapter type label cor responds to the local power supply voltage All parts of the electrical system must comply with currently applicable offi cial regulations Place the heated vaporizer only ona hard stable surface and not on any soft or heat sensitive material Take care that the power adapter cord cannot be damaged through kinking crushing or pulling Improper installation may lead to personal in
21. nized Component Mark This symbol indicates that the corresponding devices are listed by UL Z R HS Restriction on the use of certain hazardous substances in o electrical and electronic equipment Efficiency Level 5 Efficiency of power adapter Symbol for FCC declaration of conformity Fe electromagnetic interference approval in the USA Equipment with this symbol may only be used in the house dry surroundings 2 SAFETY RECOMMENDATIONS gt gt gt Safety recommendations The packaging material plastic bags boxes etc must be kept out of the reach of children as itis a potential source of danger People who require assistance must be supervised constantly during application Such persons often underestimate the hazards involved e g strangulation with the power adapter cord thus resulting in a risk of injury The device contains small parts which can block the respiratory tract and lead to choking There fore make sure that you always keep the vaporizer and the acces sories out of the reach of babies and infants When charging the battery only use the power adapter supplied with the vaporizer or the 12 volt car adapter available as an acces sory from Storz amp Bickel The use of products from other sources can damage the battery If you have any concerns ask a specialist to check whether the electrical system is in accordance with the local safety regulations If there are any problems d
22. otton towels may be used for cleaning As solvent we recommend alcohol ethanol or warm water with wash up liquid Manual cleaning of the disassembled cooling unit Do not immerse any plastic components in alcohol or eth anol for longer than an hour Extended contact with alcohol or etha nol can lead to discoloration or embrit tlement of plastic parts Before assembling allow all compo nent parts to dry properly After cleaning check all component parts for surface damage tears sof tening or hardening impurities distor tion and discoloration and set dam aged component parts aside Warning Alcohol ethanol A is flammable and may easi ly ignite Sets of new cooling units may be ordered from www storz bickel com 11 TECHNICAL SPECIFICATIONS Power adapter Power consumption 36 W Supply voltage 100 240 V 50 60 Hz Output voltage 12V DC MIGHTY Vaporizer Supply voltage 12V DC The voltage details are located on the respective type labels of the MIGHTY Vaporizer and power adapter Power required by MIGHTY Vaporizer 36 W Operating temperature 5 C 40 C 41 F 104 F Vaporization temperature adjustable between approx 40 C 210 C 104 F 410 F Weight approx 230 g Please unplug the power adapter from the mains socket to completely disconnect from the mains power supply Subject to technical changes Manufacturer Storz amp Bickel GmbH amp Co KG Rote Str 1
23. outhpiece seal ring Pulling the mouthpiece from the cooling unit cap Open the cap lock by pulling it rear wards Opening the cap lock Remove the cap lock from the cap by pulling up at one side Removal of the cap lock Separate the cooling unit cap from the cooling unit base by pulling off the cap upwards gy Pull the cooling unit cap from the cooling unit base 10 DISASSEMBLING CLEANING AND ASSEMBLING Remove the large and small base seal rings Lever out the large seal ring from the recess in the notch using the filling chamber tool Removal of the large base seal ring Push the upper screen downwards out of the filling chamber cap from above by using the filling chamber tool sup plied Reassemble in reverse order When assembling make sure that seal rings are properly seated The mouthpiece seal ring especially must sit completely in the cap and be no longer visible The upper screen must be inserted carefully into the groove provided Disregarding this may allow plant particles to enter the cooling unit so blocking this or be inhaled Pressing out the upper screen 10 DISASSEMBLING CLEANING AND ASSEMBLING 10 2 Cleaning the MIGHTY Cooling Unit The cooling unit can be disassem bled for cleaning purposes and then assembled again see Section 10 1 Disassembling and reassembling the MIGHTY Cooling Unit The cleaning brush cotton swabs and paper or c
24. possible way for your personal re quirements This statement has not been evalu ated by the FDA The MIGHTY Vapor izer is not a medical device and is not intended to diagnose treat cure or prevent any disease 5 FACTORS INFLUENCING VAPORIZATION The amount of aromas and fragrances released can be influenced by the fol lowing factors 1 Quality The amount of aroma or fragrance contained in the respec tive plant material that can be va porized 2 Quantity The amount of vaporiza tion material in the filling chamber 3 Surface The finer the plant is ground the greater the surface and the more aromas and fra grances can be released during the vaporization cycle 4 Temperature The higher the tem peratures the more aromas and fragrances will be released at once Please note Increasing the tempera ture should be the last resort because plant material tastes more roasted when using higher temperature Since the plant ingredients are re leased in a gentle manner the vapori zation cycle may be repeated with the same contents in the filling chamber Depending on the four factors de scribed above the filling chamber contents may be reused multiple times until the aromas and fragrances are released completely If no more vapor is produced at the highest temperature then the vapori zation material is completely exhaust ed and must be replaced with new material However for the best aroma resu
25. pter Please check whether all components have been included If not please inform the Storz amp Bickel Service Center In the case of technical problems questions about the device repairs warranty claims and disposal of the device customers in the US and Canada should contact the following address Storz amp Bickel America Inc 1078 60th Street Suite A Oakland CA 94608 Phone 510 451 1553 Fax 510 451 2053 email service america storz bickel com All other customers should contact this address Storz amp Bickel GmbH amp Co KG Rote Strasse 1 78532 Tuttlingen Germany Phone 49 7461 969707 0 Fax 49 7461 969707 7 email service storz bickel com 1 PRODUCT OVERVIEW MIGHTY VAPORIZER MIGHTY Vaporizer functional elements Mouthpiece Cooling unit Actual temperature display Minus temperature butto Plus temperature button Type label ne on the rear Set temperature display ON OFF switch Battery charging display Charging socket Filling chamber tool under the type label 2 SAFETY RECOMMENDATIONS Read the following safety recommendations thor oughly and carefully before using the device These Instructions for Use are a significant part of the vaporizer and power adapter and must be installation use and maintenance of the vaporizer and power adapter Please keep this brochure in a safe place for future reference You may download the current In structions for U
26. se for the MIGHTY on www storz bickel com provided to the user The instructions given in these In structions for Use must be strictly observed as they are extremely important to ensure safety during Explanation of symbols Please follow these instructions carefully Safety recommendations In order to avoid injuries to persons and damage to the equipment it is mandatory to observe instructions marked with this symbol Note Tip This symbol always gives you technical information or useful tips regarding the vaporizer Symbol for the manufacturer the manufacturer s name and address are next to the symbol The device was introduced after 13 August 2005 It may not be disposed of in normal household waste The X on the trash can indicates the necessity of disposing of this device separately EU conformity symbol C The manufacturer confirms with this symbol the compliance of the product with the applicable European directives and standards o 2 SAFETY RECOMMENDATIONS Nationally Recognized Testing Laboratory additional requirements of UL 499 and CAN CSA C22 2 No 64 have been tested on the basis of EN 60335 1 Safety tested and production monitored by TUEV SUED Germany Caution Hot surfaces Do not touch metal parts Keep away from sunlight Protect against moisture and humidity DC direct current The following symbols relate to the power adapter ol Safety Category Il device UL Recog
27. to be used Failure to comply with any of the points mentioned in these Instructions for Use release Storz amp Bickel GmbH amp Co KG from any and all liability 13 WARRANTY LIABILITY REPAIR SERVICE Limitation of liability In no event shall Company be liable for any indirect incidental punitive special or consequential damages including but not limited to damages for loss of profits revenue goodwill or use incurred by Customer or any third party whether in an action in contract tort strict liability or imposed by stat ute or otherwise even if advised of the possibility of such damages Company s liability for damages aris ing out of or in connection with this agreement shall in no event exceed the purchase price of the Products It is agreed and acknowledged that the provisions of this agreement allocate the risks between Company and Cus tomer that Company s pricing reflects this allocation of risk and but for this allocation and limitation of liability Company would not have entered into this agreement In jurisdictions that limit the scope of or preclude limitations or exclusion of remedies or damages or of liability such as liability for gross negligence or willful misconduct or do not allow implied warranties to be excluded the limitation or exclusion of warran ties remedies damages or liability set forth above are intended to apply to the maximum extent permitted by ap plicable law
28. uring operation immediately pull out the power adapter from the socket The power adapter cord must be unwound over its entire length avoid rolling up and overlapping gt gt the cord It must not be exposed to any impacts and must be kept out of the reach of children Also it must not be kept near liquids or sources of heat and must not be damaged Do not wind the power adapter cord tightly nor pull it over sharp edges and never crush or kink it If the power adapter cord is damaged please contact our Service Center to have it replaced Never try to repair a power adapter cord your self The use of multiple sockets and or extension cables is not recommended However if this is absolutely necessary only products with a quality certificate such as UL IMQ VDE S etc may be used provided the speci fied power exceeds the power required A Ampere by the devices that are connected After use the vaporizer must be placed on a stable flat surface To be used only at a sufficient distance away from heat sources ovens stoves fireplaces and in locations where the ambient temperature cannot drop below 5 C 41 F Store the vaporizer and power adapter in a dry place protected against the effects of weather and out of the reach of children or unqualified persons It cannot be used in damp locations such as bathrooms etc 2 SAFETY RECOMMENDATIONS gt Do not operate the vaporizer close to fl

Download Pdf Manuals

image

Related Search

Related Contents

Manual de instalación de los modelos HD920EV  MANUAL DE INSTRUCCIONES - Do My Own Pest Control  L2/L3スイッチ乗り換えキャンペーン    Verbatim Wireless Laser Desktop Mouse with Docking Station  Notes From Your Kitchens!  Nobo Clip Frames  Manuale per il prodotto Samsung SNB-5001  PresenterPLUS  ATV Cabin with Sunroof  

Copyright © All rights reserved.
Failed to retrieve file