Contents Pdf

Home

1. 6 2 Charging EnergyPak outside its holder e EnergyPak Front 1 Switch off the EnergyPak refer to 7 2 ON OFF button 2 Insert the key and unlock the EnergyPak holder then push the EnergyPak upward along the down tube direction 3 Lift out the EnergyPak 4 Connect the charger to the EnergyPak 5 Connect the charger to an AC outlet 6 During charging the LED will be RED when charging is finish the LED will be GREEN 7 Disconnect the charger first from the outlet and then from the EnergyPak 8 Place back the EnergyPak and make sure 9 Push back the EnergyPak the slots fitted correctly 10 Pull out the key 11 e EnergyPak Central e EnergyPak Rear Vertical Ke RIDE CONTROL gt a SPORT Average TRIP DIST ODO Speed kmumvy PA 71 Tami Comes Comes MI ap ap i in j TRIP TIME lt T TIME AMPM _ G 88 88 as GIANT Lat nove TO A CI NORMAL 1 Switch off the System refer to 7 2 ON OFF button Switch off the system 2 Insert the key to unlock the EnergyPak 4 Connect the charger to the EnergyPak holder and push the EnergyPak outward 5 Connect the charger to a AC outlet 3 Lift out the EnergyPak 6 During charging the LED will be RED when charging is finish the LED will be GREEN 7 Disconnect the charger first from th
2. TRIP DIST ODO Speed km mH FAT HH pa am am Ii TRIP TIME NORMAL am Sas m TIME AMPM I 66 88 os GIANT ese During charging the LED will be RED when charging is finish the LED will be OFF Switch off the system Unlock the EnergyPak holder and push the Pull out the key and fold out the grip Disconnect the charger first from the outlet Fold in the grip EnergyPak outward and then from the EnergyPak i Chargers for 36V double battery bikes have two charging plugs EnergyPaks will not be charged simultaneously but one at the time When charging is finished the LED on the 36V charger will be green This is the right position to charge the Connect the charger to the EnergyPak Push back the EnergyPak EnergyPak 16 17 e EnergyPak Rear Horizontal 1 Switch off the system refer to 7 2 ON OFF button 2 Put in the key 3 Unlock the EnergyPak holder and pull the EnergyPak backward 4 This is the right position to charge the EnergyPak 5 Connect the charger to the EnergyPak 6 Connect the charger to a AC outlet 7 During charging the LED will be RED when charging is finish the LED will be GREEN 8 Disconnect the charger first from the outlet and then from the EnergyPak 9 Hold the grip then push bac
3. e Keep the charger away from water e Do not use the charger for other purposes e Do not subject the charger to shocks e g by dropping e Do not cover the charger or place objects on it e Avoid contact during the charge The charger heats up i Also take notice of the information at the backside of the charger 2 3 Luggage carrier See to it that while transporting luggage the EnergyPak holders cannot get damaged i Maximum rear carrier load 25 KG 110 230 V 3 Range A Overview 3 1 Range conditions 4 1 EnergyPak System The running distance on one charge varies depending on several circumstances such as e Outdoor temperatures e Wind resistance e Tire pressure e Hilly and rough surface e Rider weight and luggage e Acceleration e Poor maintenance e The number of charges discharges The more charges discharges the less capacity it will have The table below gives an approximate range based on different road patterns Condition Eco km Normal km Sport km Models with EnergyPak Flat road A 50 65 40 55 30 40 Front Li lon battery 10Ah Sloping road B 40 55 35 50 20 30 Steep road C 35 50 25 40 15 25 Models with EnergyPak Flat road A 60 75 50 70 40 50 Central Li lon battery Sloping road B 45 60 40 55 30 40 9Ah Steep road C 40 55 30 45 20 30 Front motor models with Flat road A 70 85 55 70 45 55 EnergyPak Rear Horizon
4. off the lights e RideControl The LCD backlight will automati cally switch on i The EnergyPak supplies power to the lights The lights will remain on when the bicycle is standing still RideControl Sport City 21 Pi Speed xy TRIP DIST LED RideControl li Speed kmH TRIP DIST LED RideControl Sign settings RideControl Press button C to select the following display indications e Speed trip distance amp trip time e Average speed ODO total distance amp time RideControl Sport City with Full LCD Display Press button C to select the following display indications e Speed trip distance amp time e Average speed ODO total distance amp trip time 22 Average A TRIP DIST ODO Speed kmn Aar PT J l TIME AM EHRT Fig Li km h TRIP ri Fi TME TOTAL 0D0 LIL km Operation settings e Time setting RideControl 1 Press and hold the buttons B and D simultaneously until 00 blinks 2 Press button C less than 2 5 seconds to enter the hour setting mode 3 Press button B to set the hour indication to 12 H or 24 H 4 Press button C less than 2 5 seconds to set the hour format The hour digits blink 5 Press button B to lower the hour digits and press button D to add the value 6 Press button C hour is set The minute digits blink 7 Press button B to lower the minute dig
5. be processed Claims made outside the country of purchase may be subject to fees and additional restrictions Warranty duration and detail may differ by frame type and or by country This warranty gives you specific legal rights and you may also have other rights which may vary from place to place This warranty does not affect your statutory rights For 2011 and older model bicycles please consult your owner s manual or contact Giant or your Authorized Giant dealer for the applicable warranty information 30 Inhoudsopgave 10 Algemeen 1 1 Zo gebruikt u deze handleiding goed 1 2 Service en technische ondersteuning Veiligheid 2 1 EnergyPak 2 2 Oplader 2 3 Bagagedrager Bereik 3 1 Factoren die het bereik be nvloeden 3 2 Overige gegevens Overzicht 4 1 Overzicht van de onderdelen 4 2 Oplader 4 3 RideControl 4 4 Sleutels Afstellen van de RideControl 5 1 Afnemen van de RideControl 5 2 Terugplaatsen van de RideControl 5 3 Afstellen van het panel 5 4 Het volledige LCD display verwijderen 5 5 Het volledige LCD scherm terugplaatsen 5 6 Afstellen EnergyPak opladen 6 1 Overzicht van de onderdelen 6 2 Opladen EnergyPak buiten de houder 6 3 Opladen EnergyPak in de houder RideControl 7 1 Overzicht van het paneel 7 2 Instellingen van de RideControl unit Onderhoud Problemen oplossen BEPERKTE GARANTIE O GIANT aa D wow OW NN aooo O1 OOONNN N NL
6. off 26 Power assist setting RideControl Sport City with Full LCD Display and LED RideControl Press button D1 to choose the higher Power assist level E Press button D2 to choose the lower Power assist level E e NORMAL Normal power assist e SPORT High power assist Gives the smallest range e ECO Low power assist Gives the maximum range e OFF For riding without power assist but with 3 l Irec Va ry E cycle computer and light functions JU ri LED RideControl of the LED for power assist Ha J a setting will be off L kmn W O A H ug Tite ve 00 on ag 8 Maintenance Giant Hybrid uses plastic shells to cover the electrical parts so it is forbidden to use excessive water to wash the plastic Use a soft cloth with a neutral solution to wipe the dirt off the plastic shells After that wipe it dry with a clean soft cloth Do not wash these plastic components with water When the internal electrical parts are de tected with water the insulator may corrode which leads to power leakage or other problems Do not use other soap solutions to wash these plastic components Non neutral solutions may cause color change distortion scratch etc Do not use high pressure water or air hoses for cleaning It can force water into electrical components which may cause malfunctioning Avoid leaving the bike outdoors When not riding keep the bike in a location where it will be protected from snow ra
7. Contents 8 9 General 1 1 Use of the manual 1 2 Service and technical support Safety 2 1 EnergyPak 2 2 Charger 2 3 Luggage carrier Range 3 1 Range conditions 3 2 Other data Overview 4 1 EnergyPak system 4 2 Charger 4 3 RideControl 44 Keys RideControl adjustments 5 1 Take away the RideControl 5 2 Place back the RideControl 5 3 Adjustment 5 4 Take away the Full LCD Display 5 5 Place back the Full LCD Display 5 6 Adjustment EnergyPak charging 6 1 Overview components 6 2 Charging EnergyPak outside its holder 6 3 Charging EnergyPak inside its holder RideControl 7 1 Overview panel 7 2 RideControl unit setting Maintenance Troubleshooting 10 Guarantee conditions O GIANT NN AR A www W Doon O1 OMDONNN N Z E 1 General Welcome and congratulations On your purchase of a new Giant hybrid power bicycle the fun of pedaling is only moments away Ride Life Ride Giant Nothing makes us happier than seeing people out riding bikes For over thirty years Giant has manufactured quality bikes for every type of terrain and rider imaginable Giant bicycles have allowed millions of cyclists just like you the opportunity to live happier healthier lives because of the joy exercise and sheer exhilaration that riding a bicycle brings And it is this commitment to sharing the joy of the ride that inspires us to continually offer the world s most innovative bicycles 1 1 Use of the ma
8. e outlet and then from the EnergyPak Unlock the EnergyPak holder and push the EnergyPak outward 8 Place back the EnergyPak 10 Pull out the key 9 Fit the battery slot to the lock and push back the EnergyPak Lift out the EnergyPak Connect the charger to the EnergyPak 12 13 110 230V During charging the LED will be RED when charging is finish the LED will be OFF Disconnect the charger first from the outlet and then from the EnergyPak Fold in the grip Push back the EnergyPak Refer the caution on page 17 14 e EnergyPak Rear Horizontal 1 Switch off the system refer to 7 2 ON OFF button 2 Insert the key into the key hole to unlock the EnergyPak holder then pull the EnergyPak backward to remove the EnergyPak from the EnergyPak holder 3 Connect the charger to the EnergyPak 4 Connect the charger to an AC outlet 5 During charging the LED will be RED when charging is finish the LED will be GREEN 6 Disconnect the charger first from the outlet and then from the EnergyPak 7 Place back align the EnergyPak to the slot and push it forward till hear the lock click sound 8 Pull out the key 15 6 3 Charging EnergyPak inside its holder e EnergyPak Rear Vertical an RIDE CONTROL Ceo SPORT Average
9. in sun etc Snow and rain can cause the bike to corrode The ultraviolet from the sun can fade the paint or crack any rubber or plastic on the bike 27 9 Troubleshooting LED status Cause Solution L1 blinks The EnergyPak is completely empty Charge the EnergyPak L2 blinks Pedal plus sensor malfunction Reset the power Contact an authorized dealer if the malfunction persists L3 blinks RideControl Overheated 1 driver unit Allow the bike to cool down for ten minutes LED RideControl and Full LCD Display Speed sensor malfunction Adjust the sensor magnet position Contact an authorized dealer Contact an authorized dealer Contact an authorized dealer L4 blinks Syncdrive malfunction L5 blinks Battery communication error e The power assist is not available when an indicator L1 L2 L4 blinks e If the LED is not on during use check the EnergyPak charge level and or the fitting of the EnergyPak In event of an error the power assist is inactive RideControl cu rel 3 SPEED Li km h 6 55 eae po 1 LED RideControl LCD Display 28 O GIANT 10 LIMITED WARRANTY Giant warrants for the original owner only the frame rigid fork or original component parts of each new Giant brand bicycle to be free from defects in material and workmanship for the following specified periods Warranty of lifetime for e The bicycle frame except on models intended for downhill purposes Warrant
10. its and press D to add the value 8 Press button C minute is set 23 TRIP DIST Speed kmH arn 7 Li lkm lt TIME AM 7 EHRE d d p Koa 1 1 t 1 m EC SO ent pe l Fot g B l See TRIP DIST Speed kmH CO E i e Time setting e Unit setting for distance and speed RideControl Only RideControl Sport City with Full LCD Display 1 Press button B to change the distance speed unit to km and km h or to Mi and Mi h 2 Press button C the distance speed unit is set Pressing this button also gives access to the reset mode 1 Press button B for 5 seconds to enter the time setting mode 7 Speed km H mv IFicc ri cu J mit i Reset trip information to zero m km h p Jp Hia HEM J RideControl TA zee 1 Press and hold Mode button C for 2 3 mt ahead seconds to reset the values of trip distance trip L g 1 4g time and average speed to zero 2 Press button C to switch the time setting mode the digits blink in each time setting mode a i o the frequency of switching time setting mode is g RideControl Sport City with Full LCD Display fel 1 Press and hold button D1 for 5 seconds to Minute setting Hour setting Date setting 3 f trio dist trio ti r Month setting Back to Minutes setting ele adore a Panes 5 3 Press button D1 to add the time
11. k the EnergyPak and pull out the key 18 7 RideControl 7 1 Overview panel NORMAL rare om lal i RideControl LED RideControl 19 O GIANT Z E c I 0Tn m 68 Py Ug SE Oo Altar ors EEE EI cf I E E RideControl Sport City LCD Display On Off EnergyPak selector Lighting B1 Lighting indication Mode Power assist set button D1 Assist up D2 Assist down Power assist indication Speed Average speed Trip distance ODO Total distance Trip time K Time vO UvO EnergyPak charge indicator L1 EnergyPak charge indicator battery 1 L2 EnergyPak charge indicator battery 2 EnergyPak select indicator left or right M1 EnergyPak select indicator battery 1 M2 EnergyPak select indicator battery 2 Temperature RideControl plug socket RideControl Communication cable plug MotionAssist Power assist level indication bar Synchronized with the motor supporting level to the rider pedaling 20 7 2 RideControl unit settings ON OFF button Press the ON OFF button A e to switch on the system e more than 2 5 seconds to switch off the system e less than 2 5 seconds for a EnergyPak switch over applies for bikes with two EnergyPaks When the RideControl is switched on the display shows its initial settings without backlight AN Release pedal pressure while switching between EnergyPaks RideControl Sport City Lighting Press button B to switch on
12. le of the LCD mount e Tighten the bolt e Place back the LCD Display refer to section 5 5 RideControl City e Unscrew the bolt F a few turns e Adjust the RideControl City e Tighten the bolt LED RideControl e Unscrew the bolt E a few turns e Adjust the LED RideControl e Tighten the bolt RideControl Sport e Unscrew the bolt G a few turns e Adjust the RideControl Sport e Tighten the bolt 6 EnergyPak charging 6 1 Overview Components EnergyPak Rear Horizontal EnergyPak Rear Vertical A EnergyPak B Charger C Charging socket i The EnergyPak must be fully charged before the first ride or if the bike has not been rid den for over a month e Charge the EnergyPak in a room with a temperature between 0 C 32 F and 40 C 104 F e Discharge the EnergyPak completely by riding the bicycle after 15 normal charges or at least every three months totally before charging the EnergyPak again It leads to an increase of the life span AN e Stop the charging procedure immediately if you notice a strange smell or smoke Take the EnergyPak to an authorized dealer for service or replacement e Do not recharge the EnergyPak for over 24 hours The charge of the EnergyPak can be done in two ways e With the EnergyPak outside its holder see 6 2 e With the EnergyPak inside its holder see 6 3 EnergyPak Front and EnergyPak Central should not be charged inside its holder 10
13. nual Read this manual carefully before you start riding on your new Giant hybrid power bicycle By doing so you will have a better understanding for the general operation of the various bike parts You will learn many of the components you once recognized as part of a Twist bike have changed significantly Safe riding instructions are equally important and should not be overlooked Instructions about how to ride safely are as important as always and must not been overseen So take a moment to read this manual before you start riding i This manual is not intended to be an extensive reference book about service repair and maintenance Consult for that your dealer 1 2 Service and technical support Approval and conformity This hybrid power bicycle fulfills the requirements of the EC directive 2004 108 EC The Aspiro Twist and Escape Hybrid bikes conform e City Trekking bicycles EN 14764 e Electric bicycles EN 15194 The Roam XR Hybrid amp Talon 29 Hybrid bikes conform e Mountain bicycles EN 14766 e Electric bicycles EN 15194 2 Safety 2 1 EnergyPak e Keep the EnergyPak away from water and open fire e Do not use the EnergyPak for other purposes e Do not connect positive and negative terminals e Keep the EnergyPak away from children and pets e Watch the specified voltage The grip A also serves as a plug cover i Also take notice of the information at the backside of the EnergyPak 2 2 Charger
14. r Normal wear and tear on parts such as tires chains brakes cables and gearwheels in situations where there are no assembly or material defects Bicycles serviced by other than an Authorized Giant dealer Modifications from the original condition Use of the bicycle for abnormal competition and or commercial activities or for purposes other than those for which the bicycle was designed Damage caused by failing to follow the owner s manual Paint finish and decal damage resulting from taking part in competitions jumping downhill and or training for such activities or events or as a result of exposing the bike to or riding the bike in severe conditions or climates Labor charges for part replacement or changeover Except as is provided by this warranty and subject to all additional warranties Giant and its employees and agents shall not be liable for any loss or damage whatsoever including incidental and consequential loss or damage caused by negligence or default arising from or concerning any Giant bicycle Giant makes no other warranties express or implied All implied warranties including the warranties of merchantability and fitness for a particular purpose are limited in duration to that of the express warranties stated above Any claim against this warranty must be made through an Authorized Giant Dealer or distributor The purchase receipt or other proof of the date of purchase is required before a warranty claim may
15. tal Sloping road B 60 75 40 55 35 45 Li lon battery 10Ah Steep road C 50 65 30 45 25 35 Rear motor models with Flat road A 65 80 55 65 45 55 EnergyPak Rear Horizontal Sloped road B 50 65 40 50 35 45 Li lon battery 10Ah Steep road C 45 60 35 45 25 35 Models with EnergyPak Flat road A 65 80 50 65 40 50 Rear Vertical Li lon Sloping road B 45 60 35 50 30 40 battery 8Ah Steep road C 40 55 30 45 20 30 Models with EnergyPak Flat road A 110 140 85 120 70 85 Rear Vertical two Li lon Sloping road B 95 110 70 95 50 70 batteries 8Ah x 2 Steep road C 75 95 50 75 35 50 e Do not ride with under inflated tires and keep the chain clean and well lubricated EnergyPak Rear Vertical RV EnergyPak Rear Horizontal RH 3 2 Other data A EnergyPak holder E Grip EnergyPak RV Grip G Energy level check EnergyPak life span B EnergyPak lock cover charging socket H Tail light EnergyPak Rear If used and maintained properly approximately 600 charge cycles C Key F Charging socket Horizontal D EnergyPak Extended storage Charge the EnergyPak to full level and from then on every three months Push Energy level check button once and wait for 1 2 seconds The LEDs will show the Storage temperature 0 C 32 F to 40 C 104 F remaining battery energy level 4 2 Charger G wl ANY i la U Charger J Charger plug 2x for 36V double battery bikes 4 3 RideControl K RideControl N RideControl Ci
16. ty Compact with LCD Display L LED RideControl O RideControl Sport Compact with LCD Display M Full LCD Display LCD Display 4 4 Keys The bike comes standard with two lock keys Keep the spare key in a safe place for emergencies A qualified locksmith may duplicate the keys Record the key number for future reference and replacement If the keys are ever lost or stolen contact an authorized Giant dealer for replacement 5 RideControl adjustments 5 1 Take away the RideControl e Push the release button A to release the RideControl 5 2 Place back the RideControl 1 Place the RideControl into the holder B 2 Push the RideControl in the holder AN Make sure that contact surface of RideControl and bracket are dry before mounting the RideControl 5 3 Adjustment e Unscrew the bolt C a few turns e Adjust the panel e Tighten the bolt 5 4 Take away the Full LCD Display e Hold the LCD Display and turn it clockwise to release the LCD Display from the holder 3 w Ane Peto g pe ii Beco BABE 6 5 5 Place back the Full LCD Display 1 Place the LCD Display into the holder C 2 Turn the LCD Display counterclockwise AN Make sure that contact surface of LCD Display and bracket are dry before mounting the LCD Display 5 6 Adjustment Full LCD Display e Take away the LCD display refer to section 5 4 e Counterclockwise to unscrew the bolt D a few turns e Adjust the ang
17. value and or er e N g press button D2 to lower the value Reset total ODO for RideControl Sport City with 4 Press button B for 5 seconds to complete the Full LCD Display time setting 1 Press and hold button D2 for 5 seconds to 5 If button B is not pressed for 5 seconds the reset the values of total ODO to zero new setting will be saved automatically i The maximum of ODO distance show 9999km operate this function when the J30 rt ri ODO distance is reached 9999km Ae i SPEED ae km h AFA rae rir LiL E total ono LIN km 24 25 Reset to factory setting 1 Press and hold the buttons B and D simulta neously until 00 blinks 2 Press button D less than 2 5 seconds to enter the reset mode 3 Press button D twice for less than 2 5 seconds the system will be reset to the initial factory setting MotionAssist operation RideControl City MotionAssist works only the speed under 6km hr e Turn MotionAssist backward to increase the assist speed e Turn MotionAssist forward to reduce the assist speed Power assist setting RideControl Press button D to choose the Power assist level E e NORMAL Normal power assist SE ge es e SPORT High power assist Gives the smallest range e ECO Low power assist Gives the maximum range e OFF For riding without power assist but with cy cle computer and light functions LED for power assist setting will be
18. y of ten years for e Rigid forks Warranty of three years for e Frames on models intended for downhill purpose Warranty of two years for e Batteries and electric HPB components e Other electronically equipments Warranty of one year for e Paint finish and decals e All other original parts including rear shock linkages but excluding non Giant Brand parts suspension forks and rear shock absorbers All non Giant brand parts suspension forks and rear shock absorbers shall be covered exclusively by the stated warranty of their original manufacturer REQUIRED ASSEMBLY WHEN PURCHASED This warranty applies only to bicycles and framesets purchased new from an Authorized Giant Dealer and assembled by that dealer at the time of purchase LIMITED REMEDY Unless otherwise provided the sole remedy under the above warranty or any implied warranty is limited to the replacement of defective parts with those of equal or greater value at the sole discretion of Giant This warranty extends from the date of purchase applies only to the original owner and is not transferable In no event shall Giant be responsible for any direct incidental or consequential damages including without limitation damages for personal injury property dam age or economic losses whether based on contract warranty negligence product liability or any other theory 29 Z LL EXCLUSIONS The above warranty or any implied warranty does not cove

Contents

Contents

Download Pdf Manuals

Related Search

Related Contents