WiFi Detector - StarTech.com
Contents
1. will be activated immediately Input a file name and click Save Current to write the current setting values to a Save Current profile in the Profile Name list Delete Delete a selected profile Other Advanced Setting Accesses advanced settings Information Displays the driver version firmware and the MAC Adaress of the adapter 12 Instruction Manual WEP and WPA Encryption WIFIDETG supports WPA Wi Fi Protected Access which combines IEEE 802 1x and TKIP Temporal Key Integrity Protocol technologies Client users are required to authorize before accessing access point routers and the data transmitted in the network is encrypted decrypted using a dynamically changed secret key This adapter also has a built in AES engine which ensures the highest degree of security and authenticity for digital information and provides the most advanced solution defined by IEEE 802 11i for wireless network security WEP Key Setting WEP Key Setting Key Length 64bit 128bit C 256 bit Default Key ID 1 Key Format Hexdecimal C ASCII Key Value 1 e NNUS See 2 e 3 pe ee ee ae we sa em WEP Settings Parameter Description Key Length Choose from 64 bit 128 bit or 256 bit to encrypt transmitted data A larger key length will provide higher level of security but the throughput will be lower Default Key ID Select one of the keys 1 4 as the en2. j n i Seek Lock LCM Display Charging the Wi Fi detector 1 Remove the cap from the Wi Fi detector and slide the power switch to the ON position Carefully insert the USB connector into an available USB port on your computer The following will appear on the display e THE ACT Eecharaina Battery strength Indicator The Battery Strength indicator will be animated while the Wi Fi detector is being recharged The Link Act icon will blink when the Wi Fi detector is being used as a wireless USB adapter to surf the Internet 2 When the Wi Fi detector is finished recharging it will automatically stop charging the battery Once fully charged you will see the Charge Finish message displayed and the battery strength indicator will stop blinking el IHE ACT Charse Finish 5 Instruction Manual 3 If you slide the power switch to the OFF position while recharging the Wi Fi detector will stop recharging the battery and you will see Stop charging displayed The battery strength indicator will stop blinking el IHE ABCT Shor Dharaeins el Using the Wi Fi detector 1 Slide the power switch to the ON position The Welcome Screen will appear as follows 2 After the Welcome Screen is displayed the Wi Fi detector will automatically enter scanning mode to detect nearby Wi Fi signals Unencrypted 9 Rb Encrypted 9 AL TN e Z I
3. Maximum Bandwidth 2 4000 2 4835GHz Operating Systems supported Windows 98SE Me 2000 XP 2003 Server Certifications Regulatory and other FCC CE RoHS WEEE Operating Temperature 32 140 F 0 60 C Operating Humidity Humidity 0 85 NonCondensing Dimensions 14 x 28 5 x 91mm 55 x 1 12 x 3 58 Technical Support StarTech com s lifetime technical support is an integral part of our commitment to provide industry leading solutions If you ever need help with your product visit www startech com support and access our comprehensive selection of online tools documentation and downloads Warranty Information This product is backed by a one year warranty In addition StarTech com warrants its products against defects in materials and workmanship for the periods noted following the initial date of purchase During this period the products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not warrant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or their officers directors employees or agents for any damages whether direct or indirect special punitive incidental consequential or otherwise loss of profits loss of business or any pecuniary loss arising out of
4. connect to the access point should share the same channel Select the basic data transmission speed supported by the access point When the access point works in 11b mode the maximum data rate is 11Mbps allowing two options including 1 2 Mbps and 1 2 5 5 11Mbps to be selected Tx Rate There are several transmit options including Auto 1 2 5 5 11 6 9 12 18 24 36 48 54Mbps When Auto is selected the device will choose the most suitable transmission rate automatically The higher the data rate used the shorter the distance allowed between the adapter and the wireless stations When the adapter works in 11b mode the maximum data rate is 11Mbps leaving only Auto 1 2 5 5 11Mbps options to be selected SSID The SSID up to 32 printable ASCII characters is the unique name identified in a WLAN which prevents the unintentional merging of two co located WLANs The default SSID of the access point is WLAN_AP Wireless adapters connecting to the access point should set up the same SSID as the access point Hide SSID If the Hide SSID check box is enabled the access point will not appear in the site survey list of any wireless adapters It means only the wireless adapters with the same SSID can connect to the access point avoiding unauthorized access Tx Power There are four levels to chose from to configure the transmission power of the access point The higher transmission power the larger transmission distance and wirel
5. and or symbols of third party companies not related in any way to StarTech com Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech com or an endorsement of the product s to which this manual applies by the third party company in question Regardless of any direct acknowledgement elsewhere in the body of this document StarTech com hereby acknowledges that all trademarks registered trademarks service marks and other protected names and or symbols contained in this manual and related documents are the property of their respective holders Instruction Manual Table of Contents Introduction 21 Lll ree reae way nena et aca Rie a ARRIBA RC ow ieee ae 1 Aul rs IPIE 1 Before You Begin sseseeeeeeeeeeee nnn nnn nnn 1 System Requirements ssese eee 1 Contents op eae ate Yee eie veins 1 Installation and usage sseeeeee RII 2 Charging the Wi Fi adapter sslseseee essen 2 Using the Wi Fi detecter 0 0 eee eee 3 Driver and Utility installation 2 0 2 eee 5 Using the Configuration Utility 0 0 eee eee 8 Wireless connection status 00 00 cece eee 9 General Connection Setting 0 cee eee 11 WEP and WPA Encryption 00sec ees 13 WPA Setting ol nee ea ea ee 14 Advanced Settings 0 0 0 liliis 15 Software Access Point mode lil
6. iilii 16 Access Point general connection settings 17 MAC Address Filter liliis 19 Specifications 2 bee i ee aee beue uk er RR urn 20 Technical Support 2 22sie ceci c ae ceive es nar ua py rur mua 20 Warranty Information lesse nh 20 Instruction Manual Introduction Thank for purchasing a StarTech com 802 11b g WLAN USB adapter with Wi Fi detector This convenient device acts as a wireless network adapter and can turn a wireless station into a WLAN access point Plus WIFIDETG allows you to instantly detect wireless hotspots and offers an LCM display for simplified hot spot monitoring as well as a rechargeable Li Polymer battery that can be charged each time the detector is connected to a powered USB port Features Compliant with IEEE 802 11b g 2 4GHz standards Up to 54 Mbps data transfer Supports software access point function converting a wireless station into an access point Complies with IEEE 802 11d country roaming standards USB 2 0 compliant backward compatible with USB rev 1 1 Small footprint design offers the perfect addition to laptop or desktop PCs Before You Begin System Requirements A Pentium based computer running Windows 98SE ME 2000 XP or 2003 Server Contents This package should contain 1xWi Fi Detector e 1x Instruction Manual e 1 x Driver CD Instruction Manual Installation and use Top View Bottom View On Off Back Next
7. or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limitations or exclusions contained in this statement may not apply to you 20 About StarTech com StarTech com is The Professionals Source for Hard to Find Computer Parts Since 1985 we have been providing IT professionals with the quality products they need to complete their solutions We offer an unmatched selection of computer parts cables server management solutions and A V products and serve a worldwide market through our locations in the United States Canada the United Kingdom and Taiwan Visit www startech com for complete information about all our products and to access exclusive interactive tools such as the Parts Finder and the KVM Reference Guide StarTech com makes it easy to complete almost any IT solution Find out for yourself why our products lead the industry in performance support and value Revised 19 January 2007 Rev A
8. 8 SSID Indicator Displays the SSID If the SSID is too long to fit on the display it will scroll to indicate the complete SSID Instruction Manual 4 If you wish to detect a signal with a dedicated SSID simply hold down the Scan button for 4 seconds to enter Lock mode When the detector is in Lock mode an icon with a capitalized L will appear in the upper middle corner of the display Y uis i un a ng ps LH ar IN OPFEH In In Lock mode the detector constantly refreshes the signal strength so the user can move around to find where the detected signal strength is at it s peak Hold down the Scan button for 4 seconds again to unlock from Lock mode m zm wale Lar im will Driver and Utility installation Note Please do not install the USB adapter into the computer prior to installing the necessary software Note If the Wireless PC Card driver and Utility were previously installed on the host computer please uninstall the original version prior to attempting to install a second time The following instructions depict installation on a Windows XP system Please note that installation procedures are similar for Windows 98SE ME 2000 and 2003 Server To install the USB adapter 1 Insert the Installation CD into the CD DVD ROM drive Browse to and execute the Setup program to launch installation InstallShield Wizard Welcome to the InstallShield Wizard for ZyDAS IEEE 802 119 Wireless LAN USB The InstalStv
9. B adapter to act as a wireless client Mode Access Point Set the USB adapter to function as a wireless access point Network Adapter Displays USB Adapter product information Connect Station List Displays all MAC Addresses of wireless adapters connected to the access point Current Network Displays the connection settings of the current network including Channel SSID WEP Setting and TX Power Level More Setting Function settings include disable enable WEP MAC Address Filter and Bridge Adapter TX Frame Displays the number of data frames successfully transmitted by the access point RX Frame Displays the number of data frames successfully received by the access point 16 Instruction Manual Access Point general connection settings The More Setting button allows users to configure access point connection settings encryption settings and other advanced functions Access Point Setting General Connection Setting USB 1 1 Limited Channel fe x Basic Rate 1 2 5 5 11 Mbps Tx Rate Auto SSID wLAN AP f Hide SSID Tx Power EEICT Apply wep Disable Seting Authentication Mode Open System Fragment Disable RTS CTS Disable Preamble MAC Address Filter Bridge Adapter No bridge Parameter Description General Connection Settings Channel Basic Rate Select the number of radio channels used by the access point The wireless adapters that
10. General Connecton Setting Channel Tx Rate faut sso sc Network Type infrastructure Encryption Disable WEP Authentication Mode Auto Encryption Setting WEP Encryption Key Setting WPA Encryption Setting Profile Profile name l tosd Save Current Delete Other For more advanced setting information Advanced Setting Information Parameter Description General connection Select the channel used for networking The channel settings of the wireless stations within setting channel a network should be identical There are several options including Auto 1 2 5 5 11 6 9 12 18 24 36 48 54Mbps When Auto is selected the device will automatically choose the most suitable transmission rate The higher the data rate designated in the network the shorter the distance allowed between the adapter and wireless stations When the adapter works in 11b mode the maximum data rate is 11Mbps so that there are only Auto 1 2 5 5 11Mbps options available Tx Rate The SSID up to 32 printable ASCII characters comprises the unique name identified in a SSID WLAN This ID prevents the unintentional merging of two co located WLANs You may specify an SSID for the adapter allowing only the device with the same SSID to connect to the adapter If the Any check box is enabled the adapter will survey and connect to an available Any wireless station without verifying the channel consistency and SSID of the wirel
11. WiFi Detector WiFi Access Point Detector with LCD WIFIDETG Instruction Manual Actual product may vary from photo _StarTech com pP The Pi ce for Hard to Find Computer Parts FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Use of Trademarks Registered Trademarks and other Protected Names and Symbols This manual may make reference to trademarks registered trademarks and other protected names
12. Y SETTING to setup the WEP key Setup WEP keys by clicking this button Change Apply Clicking on Change will enable you to adjust WPA settings In the meantime the button will switch to Apply for settings confirmation Advanced Settings Advanced Setting allows users to enable disable country roaming and power consumption mode and setup the fragmentation and RTS CTS threshold of the adapter Advanced Setting User Interface Power Consumption Setting Language Continuous Access Mode CAM Maximum Power Saving Mode Country Roaming World Mode User Select Fast Power Saving Mode USA Fragmentation Threshold 256 2346 Disable RTS CTS Threshold 0 lt 2347 Disable gt Parameter Description User Interface Select the display language of the utility Two languages are enabled English and Chinese Country Roaming IEEE 802 11d Country Roaming is a standard that enables wireless devices to work at the proper transmission power and radio channel as regulated by the country where the user is located World Mode Enable the country roaming function the adapter will follow the settings of the connecting access point automatically User Select Disable the country roaming function to select the current location Power Consumption Setting Continuous Access Mode CAM The adapter will remain in active mode Maximum Power Saving Mode Enables the ada
13. allation now and wn contact the hardware vendor for software that has ZD1211U sys passed Windows Logo testing To CAWINDOWS System32 DRIVERS menma 7 At the following screen click Finish to conclude installation Found New Hardware Wizard Completing the Found New Hardware Wizard The wazard has fireshed installing the software for Ba CD1211JEEE 802 11b g USB Adapter Click Finish to close the wad Lm Instruction Manual Using the Configuration Utility To setup the USB adapter double click on the icon in the system tray ee 5 52 AM By default Windows XP utilizes the Windows Zero Configuration Tool to setup wireless clients If you wish to use the Wi Fi Utility included with WIFIDETG you can begin by using one of two methods First method a Double click the utility icon in the system tray b Click Yes to use the USB adapter utility Second method a Double click on the connectivity icon located in the System tray b Click Advanced c Remove the checkmark located next to Use Windows to configure my wireless network settings The Connectivity icon can also be found in the Windows Control Panel under Network Connections Wireless Zero Configuration d Wireless LAN is Controlled by the Windows Zero Configuration Do you wart to use ZDWLan as the mm m NT VAN configuration tool Wireless Network Connection 2 The following witeless network s are ava
14. are vendor for software that has passed Windows Logo testing gertrum Anyway STOP instalation 4 Insert WIFIDETG into an available USB port on the host computer 5 The Found New Hardware Wizard will display Select Install the software automatically recommended and click Next Found New Hardware Wizard Welcome to the Found New Hardware Wizard Thes wnzard helps you instal software for 2D 1211 PEEE 802 11b g USB Adapter M your hardware came with an installation CD SE o floppy disk insert it now What do you want the wazard to do natal the software automatically Recommended Install from a kst or pocte locabon Advanced Click Next to continue Instruction Manual 6 If you receive a notification that the software you are installing has not passed Windows Logo testing please click on Continue Anyway to begin installing the USB Adapter Found New Hardware Wizard Hardware Installation Please wait while the wizard installs the software The software you are installing for this hardware HAY ZD1211 EEE 802 11b g USB Adapter 2 ZD1211JEEE 802 11b g USB Adapter has not passed Windows Logo testing to verify Rs compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this inst
15. cryption key Default Key ID Hexadecimal Only A F a f and 0 9 are allowed to be set as the WEP key ASCII Numerical values characters or signs are allowed to be used as the WEP key The keys are used to encrypt data transmitted in the wireless network Fill in the text box by following the rules below 64 bit Input 10 digit Hex values or 5 digit ASCII values as the encryption keys For example 0123456aef or Guest Key1 Key4 128 bit Input 26 digit Hex values or 13 digit ASCII values as the encryption keys For example 01234567890123456789abcdef or administrator 256 bit Input 58 digit Hex values or 29 digit ASCII values as the encryption keys Change Apply Clicking Change will enable you to setup the WEP key In the meantime this button will change to Apply to be used for settings confirmation 13 Instruction Manual WPA Setting The adapter can automatically detect the WPA setting of the access point to which the adapter is intended to connect There are two kinds of WPA mode WPA and WPA PSK WPA is designed for enterprise which requires a RADIUS Server and Certificate Server for the authentication WPA PSK is a special mode designed for home and small business users who do not have access to network authentication servers In this mode the user manually enters the starting password in their access point or gateway as well as in each wireless station in the network WPA takes over a
16. dhoc mode If you wish to enable 11g connectivity please follow these steps Go to Network Connections Right click on the Wireless Network Connection and select Properties From the pop up screen click Configure Select Advanced from the Properties screen Enable IBSS G Mode ARON gt Wireless Connection Status When the Configuration Utility is opened the system will scan all channels to locate the access points stations within the accessible range of your adapter automatically connect to the wireless device with the highest signal strength and provide all information about the wireless connection Wireless LAN Configuration Tool Plus Network Adapter zD1211 tEEE 802 11b g USB Adapter Available Network Current Network Information SSID Strength uAP 43 Channel 6 so 64 Type Infrastructure SSID SO Tx Rate 11 Mbps Encrypt None More Setting Er Link Status Connected to Access Point BSSID 00 50 FC BA 18 C8 Signal Strength BEBSSSESESSESERESEES 58 Link Quality BEBSSSSESSSERERESEESESES 68 Tx Frame 301 Rx Frame 134265 D For a description of each function please refer to the chart on page 10 9 Instruction Manual Parameter Description Station Set the USB adapter as a wireless client Mode Access Point Set the USB adapter to function as a wireless access point Network Adapter Displays USB adapter properties Available Network Displays all SSIDs and
17. eid Wizard vell install ZyDAS IEEE 802 119 Weeless LAN USB on your computer To continue click Next Instruction Manual 2 If you want to install the software to a location other than that specified by default please click on Browse and select an alternate destination Then click Next InstallShield Wizard j InstallShield Wizard Choose Destination Location EA Setup Status Select folder where Setup wil install files Setup wil instal ZOAS IEEE 802 119 Wireless LAN USB in the following folder ZyDAS IEEE 802 119 Wireless LAN USB Setup it performing the requested operations To install to this folder cick Next To install to a diferent folder click Browse and select another folder lesbain CA XZyOAS 802 119 Utity InsDrvTemp_USB ZD 1 1UXP sys Destination Folder C AZyDAS 902 11g Utity 3 If you receive a notification that the software you are installing has not passed Windows Logo testing please click on Continue Anyway Please note that the software has been thoroughly tested for compatibility and reliability Software Installation The software you are installing has not passed Windows Logo testing to verily its compatibaity with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the softw
18. ess coverage Change Apply Click Change to configure the parameters of General Connection Setting The button will change to Apply for you to confirm your settings 17 Instruction Manual Parameter Description Cont d Cont d WEP Enable or disable the WEP encryption function If the WEP function is enabled only wireless adapters with the same WEP key setting can connect to the access point Setting Click Setting to configure the WEP key Please refer to Section 6 3 for more description Open System No authentication is needed for connecting to the access point Authentication Mode Shared Key Only wireless adapters using a shared key WEP Key identified are allowed to connect to the access point This value defines the maximum packet size Any packet size larger than the designated Fragment value will be fragmented If you have decreased this value and experience high packet 9 error rates you can increase it again but it will likely decrease overall network performance Select a setting within a range of 256 to 2346 bytes Minimum packet size required for an RTS CTS Request To Send Clear to Send For RTS CTS packets smaller than this threshold an RTS CTS is not sent and the packet is transmitted directly to the WLAN Select a setting within a range of 0 to 2347 bytes The preamble defines the length of the CRC block for communication among the wireless Preamble networks There a
19. ess station Ad Hoc Select this mode if there is no access point or router in the network Network Type Infrastructure This mode requires the presence of an 802 11 Access Point All communication is done via the access point or router Clicking Change will enable you to configure General Connection Setting In the Change Apply meantime this button will change to Apply for you to confirm your settings Encryption Setting Users may enable disable WEP and WPA encryption within the network 11 Instruction Manual Parameter Cont d Description Cont d This setting needs to be consistent with the wireless networks to which the adapter connects Open System No authentication is needed among the wireless network Authentication Mode Shared Key Only wireless stations using a shared key WEP Key identified are allowed to connect to each other Auto Auto switches the authentication algorithm depending on the wireless networks to which the adapter is connecting WEP Encryption Key lick thi tton t tup the WEP key Setting Click this button to setup the ey WPA Encryption Setting Click this button to setup the WPA function Profile Profile Name You can save network settings as a profile To connect to the network without making additional configuration you can load the profile L Load the setting values from the file in the Profile Name list The new settings oad
20. ilable To accest weeless network select it from the fist and then cick Connect Available wweless networks i i GAME ADP This witeless network is not secure Because a network key WEP is not used for authentication ox for data encryplion data sent over this network might be subject to accen Allow me to connect to the selected wireless network even s not secure It you are having difficulty connecting to a network click Advanced 4 Wireless Network Connection 2Properties 2 X General Wireless Networks Advanced 7 Use Windows to configure my weeless network sethnas Available networks To connect to an avaiable network click Configure i 50 GAME ADP Erelened networks Automatically connect to avaiable networks in the order listed below Instruction Manual The Configuration Utility allows you to configure the Wireless LAN USB adapter and monitor the link status during the communication process The Utility can be opened by double clicking on the icon located in the system tray tO GM 5 52AM Or to close the Configuration Utility right click on the icon and select Exit ZDWlan Please note The adapter will run at lower performance when connected using USB 1 1 As such if you wish to connect to an 11g up to 5AMbps network please ensure that the adapter has been installed using a USB 2 0 port for maximum performance The adapter will work in 11b mode when the network is set to A
21. n scanning mode the display will indicate the total number of unencrypted and encrypted Wi Fi signals detected Instruction Manual 3 Once scanning mode is complete the detector will enter its standard display mode The detector will automatically sort the signals according to signal strength followed by encrypted access points according to signal strength 4 ull 7 E 3 CHa OPE In 6 ooo SSID MEE 5 im 4 Oberating Channel Indicates the current operating channel of the detected Wi Fi signal 2 Access Points detected The left digit indicates which detected Wi Fi signal is currently displayed and the right digit indicates the total number of Wi Fi signals detected 3 Encryption indicator WEP for WEP encryption WPA for WPA encryption and WPA2 for WPA2 encryption Open indicates that the detected signal is unencrypted 4 G indicates that the signal is an 802 119 wireless signal B indicates that the signal is an 802 11b wireless signal 5 Signal Strength indicator Signal Strength is measured in increments ranging from 5 full strength to 1 low strength 6 IN indicates that the signal is an infrastructure mode signal Ad indicates that the signal is an Adhoc mode signal 7 Battery indicator with 3 bars indicates battery power When displaying as empty please recharge the detector
22. pter to remain in power saving mode when it is idle Fast Power Saving Mode Enables the adapter to remain in power saving mode when in idle but some components of the adapter are still alive In this mode power consumption is larger than Max mode 15 Instruction Manual Parameter Description Fragmentation Select the display language of the utility Two languages are enabled English and Chinese Threshold IEEE 802 11d Country Roaming is a standard that enables wireless devices to work at the proper transmission power and radio channel as regulated by current location aa World Mode Enable the country roaming function the adapter will automatically follow the settings of the connected access point User Select Disable the country roaming function to select the current location Software Access Point Mode This adapter can be used as a wireless access point The relative configurations of the access point include Channel SSID MAC Address Filtering WEP encryption and so on are described as follows Wireless LAN Configuration Tool Plus B Network Adapter Mode access Point v 201211 1EEE 802 11b g USB Adapter ind Connect Station List Station MAC AU ES Current Network Setting 00 0E 2 80 00 48 Channel 6 SSID WLAN_AP WEP Disable Tx Power Level 0 More Setting Tx Frame 393 Rx Frame 134756 Parameter Description Station Set the US
23. re two modes including Long and Short High network traffic areas should use a shorter preamble 3 This access point can protect against unauthorized users accessing the connection using MAC Address Filter MAC address filtering Wireless adapters connected to the access point can access the wired network through Bridge Adapter the bridge adapter You can select an Ethernet adapter in the list to bridge the connection between wireless and wired networks 18 Instruction Manual MAC Address Filter Access Point Setting Filter Type Disable X Disable er Reject 00 08 09 10 11 12 13 14 15 Parameter Description Disable Disable the MAC Address filter function Accept Only the wireless adapters with the MAC Address setup in the table can connect Filter Type to the access point Reject The wireless adapters with the MAC Address setup in the table will be rejected to connect to the access point Filter MAC Address MAC Address is a unique identification for hardware devices in the network It is a 12 digit hexadecimal values Up to fifty unique MAC Addresses can be setup in the table Fill in the MAC Addresses of wireless adapters you want to accept or reject access to the access point in this table 19 Instruction Manual Specifications Bus Type USB 2 0 Connectors USB Type A Male Maximum Data Transfer Rate 54Mbps
24. signal strengths of wireless stations nearby To re survey the available wireless devices please click Refresh There are two ways to view the connections between the USB adapter and the wireless stations on the list 1 Double click the wireless station on the list directly 2 Select the station you intend to connect and then click Connect this site Current Network Information Displays information about the wireless network to which the adapter is connecting This information includes Channel Type SSID TX Rate and Encrypt settings More Setting Set functions including disable enable WEP and Power Saving Mode etc Link Status Displays the status of the wireless connection BSSID Displays the MAC Address of the network to which the adapter is connecting Signal Strength Displays the signal strength level This indicator can help to find the proper position of the wireless station for quality network operation This bar indicates the quality of the link The higher the percentage the Link Quality better the quality TX Frame Displays the number of data frames successfully transmitted by the adapter RX Frame Displays the number of data frames successfully received by the adapter 10 Instruction Manual General Connection Setting By clicking on More Setting users are able to configure how the USB adapter is encrypted as well as other advanced functions More Setting
25. utomatically from that point keeping unauthorized users that don t have the matching password from joining the network while encrypting the data traveling between authorized devices WPA Setting Connect Infomation Protocol User Name Password Pre shared Key Passphrase ASCII format the length must be in 8 63 Certificate WEP Key WEP KEY SETTING Parameter Description Connect Displays settings for WPA mode Information This adapter supports two kinds of protocol for authentication including TLS and PEAP Protocol TLS and PEAP require a certificate provided by the Certificate Server PEAP requires a user name and password as well To get the certificate and the personal user name and password please contact your administrator TLS Select a certificate from the Certificate list PEAP Input the User Name and Password and also select a certificate from the Certificate list User Name Used for PEAP protocol Password Used for PEAP protocol Pre shared Key Input 8 to 63 digits of ASCII format to be used as the password for authentication within the network Certificate All available certificates for TLS or PEAP will display in the list Please select a proper certificate for wireless authentication 14 Instruction Manual Parameter Description WEP Key WEP key Setting If the access point uses WEP data encryption function please clcik WEP KE
Download Pdf Manuals
Related Search