Home
Magic Rubber
Contents
1. 3 Self regulating heating cables for comfort tracing and to avoid moisture formation on floors Without thermal insulation lan Ha Floor Floor configuration Product code temperature C MCA 10 Without 20 25 25 32 thermal insulation With 30 mm 20 25 25 32 thermal insulation with thermal insulation temperature C 1 Paving tiles 2 Adhesive 3 Self levelling cement min 2 cm max 6 cm 4 Self regulating cable 5 Metallic net option 6 Polystyrene or similar thermal insulation 30 mm min Cable metres Max Max cable length MCA10 for m2 exposition with switchgear temperature C 16A 20A 8 m m 65 70m 105 m 6 m m 65 70m 105 m Magneto thermic C type switch with a 30 mA differential protection Lengths estimated considering a starting temperature not lower than 10 C 4 Self regulating heating cables for antifreeze protection or for process temperature maintenace up to 65 C with exposure to mild inorganic solutions for classified and non classified areas Product code Power at 10 C Temperature classification Max circuit length W m EN50014 starting temperature of 25 C Switch TTL CD MCA3 10 T6 30A 195 MCA5 15 T6 30 A 160 MCA8 25 T6 40A 125 MCA type cable polyolefine internal and external sheaths Max continuous operating temperature with connected cable 65 C Max intermittent exposition temperature with disconnected
2. FSCP 600 720 x 750 x 150 about 1 7 kg For other dimensions please contact Raytech 22 Building and Thermoidraulic division 9 FSCF fire stop barriers for spotlights covering Incombustible barrier dome for the covering and protection of spotlights in false ceilings to maintain the integrity of the fire resistance of ceilings Characteristics Made of non toxic fireproof mineral fibres and expandable compounds which expand up to 5 times the initial volume it inhibits the propagation of fire and reduces the temperature in the interstices between false ceiling and the slab With ventilation holes it avoids the overheating of the lamp Flexible light and self supporting it is easy to install and remove Approval e Up to class REI 120 e Non toxic e t expands up to 5 times Installation No special care is required The protection must be placed on the spotlight adhering to the panel Ranges of use Product code Dimensions mm FSCF 250 250 x 280 Cone shaped type FSCF 350 350 x 230 Dome shaped type For other dimensions please contact Raytech io FSCI fire stop barrier for switchgear covering Incombustible intumescent barrier for the switchgear to maintain the integrity of the fire resistance of the walls Characteristics Made of fireproof fibres and intumescent materials it reduces the temperature in the wall interstices protecting from the fire propagation Approval e Up to
3. Company profile Raytech has always been synonymous with research and innovation quality safety and environmental care It is located close to Milan and it operates according to qua lity standards which comply with the International Standards with respect for the environment Raytech is certified UNI EN ISO 9001 ISO 9001 2000 It is provided with advanced production equipments in struments for a precise check of the process and a wide sto rehouse for the finished products Raytech can satisfy the requirements of its customers with a shipment service within 24 hours from order receipt This is thanks to Raytech research the company uses a wide experience and testing laboratories Self extinguishing rubber either in paste or liquid fast in cross linking insulating and sealing gel suitable also for high depth installation professional non toxic adhesives which can replace welding and screwing are some of the recent products developed thanks to Raytech research Besides these products Raytech has in its catalgoue also well established products such as tapes and electrical com ponents self regulating heating cables for electric tracing and fire stop barriers Building and Thermoidraulic division MRa Tech wWW raytechit Index Sky Plast Two components Insulating rubber in paste it is mouldable fire retarded and does not propagate flame it is fast in cross linking and re ent
4. Ray fasc B 48 290 Ray fasc N 48 290 4 8 290 Ray fasc B 48 360 Ray fasc N 48 360 4 8 360 Ray fasc B 48 390 Ray fasc N 48 390 4 8 390 Ray fasc B 48 430 Ray fasc N 48 430 4 8 430 Ray fasc B 78 180 Ray fasc N 78 180 7 8 180 Ray fasc B 78 240 Ray fasc N 78 240 7 8 240 Ray fasc B 78 300 Ray fasc N 78 300 T8 300 Paang BO Leg Ray fasc N 78 365 7 8 365 j Black colour UV stabilised particularly suitable for outdoors installations l Cold expandable braid in dispenser Flexible self extinguishing resistant to mineral oils hydrocarbons alcohol ammonia and hydroxide resins paints Easy and quick to install it allows the cold insulation connections making them high heat resistant up to 250 C Working temperature 80 250 C Standard colour brick red Ray exp 3 8 3 mm 8 mm 10m Magic Gel m Magic Rubber Super Magic Adhesive Magic Plast Adhesive E Sky Plast E Magic Box 100 RGPO B MTR ny J age Box 200 i Raytech S r l via E Fermi 11 13 17 20019 Settimo M se Mi Italy Tel 39 0233500147 Fax 39 0233500287 info info raytech it web site www raytech it
5. Cable ties Ka Ray exp Cold expandable braid Ki Building and Thermoidraulic division PROBLEM Sticking of plates paving tiles street numbers and labels on the wall Sealing of balconies and terraces Elastic closing for expansion joints cracks and fissures Sealing of wells boxes and cesspools by forming the relevant gaskets Repair and sticking of wooden rafters Repair and reproduction of surfaced elements friezes frames moulds for plaster resin and cement Sealing and repair of leaks of chimney caps or roof walls Sealing connection and repair of gutters and downpipes Gutter antifreezing tracings Protection against the corrosion of earthing rods Fixing of awnings and verandas preparation of chemical and elastic plugs Frame fixing glass seaking to avoid glass vibration Fixing of baseboard indoor and outdoor Antifreeze heating for box ramps Antifreeze stair tracing Antifreeze tracing of external pipes and meters Lighting and irrigation systems in gardens IP68 Lighting of exteriors and swimming pools Building and Thermoidraulic division PROBLEM Sealing of fire fighting tanks Sealing of showers bath tubs sanitary fixtures Anti vibration systems for washing machines and white goods Comfort and anticondensate tracing of floors Gaskets for taps and bathroom pipes Mats for bath tubs and showers Qu
6. cable max cumulative 1000 hours during cable life 85 C Dimensions of the cables 10 5 mm width x 5 0 5 mm thickness Certifications KEMA 03 ATEX 2042 U for the classified areas Il 2 G Eex e according to EN50014 and EN50019 standards Resistant to chemicals suitable for the exposure to light inorganic so lutions Type of surfaces that can be traced steel painted surfaces stainless steel and plastic Min installation temperature 30 C Building and Thermoidraulic division 17 MCA6 COMPACT 18 10A 41 Magnetothermic C type Swicth with 30 mA differential gear MCA6 compact cable internal and external sheaths polyolefines Max continuous operating temperature with connected cable 65 C Max intermittent exposition temperature with disconnected cable max cumulative 1000 hours during cable life 85 C Dimensions of the cable 7 7 mm width x 5 0 5 mm thickness Certifications KEMA 03 ATEX 2042 U for the classified areas Il 2 G Eex E Universal gel accessory for self regulating heating cables which can replace any other solution on the market It allows to realize with a degree of protection IP 68 e Integrated connections to the power cable Pot ends joints between heating cables Branch joints Characteristics Versatile ready to use not shelf life protection degree hi gher than IP 68 submerged installation re enterable non Thermal insulation pass through kit It
7. class REI 120 e Non toxic Installation No special care is required The protection must be placed on the box adhering to the wall fh Ranges of use Product code Dimensions FSCI 150 150 x 150 For other dimensions please contact Raytech Building and Thermoidraulic division 23 1 FSCC fire stop barrier for boxes covering System for the protection of electric and termination boxes made of a fire resistant closing it protects the wall from heat and fire propagation Characteristics The is casing made of calcium silicate and it contains the box Approval e Up to class REI 120 e Non toxic and asbestos free they do not emit toxic gases and dense fumes e In compliance with circular no 91 61 Installation After the opening edges have been finished and cleaned the protection is properly placed and fixed to the wall by means of screws and putty Ranges of use Product code Dimensions mm FSCC 150 150 x 120 x 75 FSCC 200 200X 170X75 For other dimensions please contact Raytech 24 Building and Thermoidraulic division 12 FIRE STOP TUBE PROTECTION fire stop intumescent sleeve Fireproof intumescent sleeve to close the pass through of metal or plastic tubes to ensure the protection against fire propagation Available in a wide range of diameters they are ap plied to seal the opening In case of fire the sleeve expands avoiding the passage of the fla mes Characteristi
8. for the box closing after filing with Magic Fluid vertical installation 3 M25x1 5 cable glands 1 Magic Fluid bag for the filling of the box Magic Box 100 100x100x50 Magic Box 120 120x80x50 Magic Box 150 150x110x70 Approvals and specification CEI 23 48 IEC 60670 boxes CEI EN 50393 LV cable accessories In Class 2 according to standard CEI 64 8 Protection degree higher than IP68 according to standard IEC 529 when filled with Magic Fluid Halogen free according to CEI EN 50267 2 2 Low cloudy fumes emission according to CEI EN 50268 standard Flame retarded according to CEI EN 50265 standard Self extinguishing and fire and abnormal heat resistance Glow wire test at 750 C according to EN 60695 2 11 29 8 25 6 29 10 A Typical applications Ray Box IP55 boxes with pre prepared knock out walls and cover with hokk closing Package e box 1 cover with hook closing 4 insulating coverings for screw heads 1 cap to close the box after filling with Magic Fluid vertical installation Approvals and specifications Characteristics e CEI 23 48 IEC 60670 boxes e Great shock resistance e P55 protection degree according to IEC 529 standard e Halogen free e Halogen free according to CEI EN 50267 2 2 standard e Non toxic and safe e Low cloudy fumes emission according to CEI EN 50268 e No shelf life standard e Self extinguishing e Flame retarded according to CEI EN 50265 standa
9. openings both in walls and floor slabs At a temperature of 200 the material starts to compact sealing the gaps thus avoiding the passage of the flames Characteristics Packed with fireproof material filled with mineral fibres and expandable compounds Approval e Up to class REI 180 for plasterboard walls refer to REI 120 e Non toxic and asbestos free e In compliance with circular no 91 61 Installation Finish and opening then lay the bags as bricks staggered and overlapped Product code Bag dimensions mm FSB 11 200 x 80 x 20 FSB 12 200 x 250 x 30 For the application on plasterboard walls please contact Raytech 2 FIRE STOP PANEL fire stop barriers in panels Incombustible panels treated on the surface with intumescent paint to stop the passage of fire as through openings in walls Building and Thermoidraulic division Their application allows the sealing ofopenings in walls in a safe and cheap way Characteristics Made of mineral wool and treated on the surface with intumescent bacteria and mould resistant paint Approval e Up to class REI 180 for plasterboard walls refer to REI 120 e Non toxic asbestos and solvent free e In compliance with circular no 91 61 Installation Finish and clean the opening edges then cut the panels with a cutters and position them in the opening The edges and the jointing lines as well as the interstices among the cables are sea led and covered with FIRE
10. site It does not need thermostats It can be safely overlapped without the risk of overheating risks It optimizes the costs reducing the power output as the required temperature is reached very easy to install Applications Antifreeze protection or temperature maintenance of pipes silos and tanks Heat tracing of ramps sidewalks stairs terraces balconies and gutters to prevent the formation of ice and to remove the snow Please contact Raytech for the project or fill in the on line forms on our site www raytech it O Typical applications 5 r i t 1 Self regulating heating cables Technical characteristics l Self regulating heating cables for antifreee tracing of ramps stairs terraces balconies and sidewalks Suitable for areas with a temperate MCA10 50 65 40A 100 climate with minimum ambient temperatures not lower than 8 C MCA20 RAMP 90 120 40A 64 Suitable for areas with severe climate with minimum ambient temperatures below 8 C Magnetothermic switch C or D type with a 30 mA differential protection 2 Self regulating heating cables for the antifreeze protection of gutters and downpipes Tracing of the on K gutters insertion wa of the cable in the downspout and tracing of the pitch MCA8 24 40 40A 100 Magnetothermic C switch type with a 30 mA differential protection Building and Thermoidraulic division
11. STOP SEAL FSS sealant Product code Panel colour Panel dimensions FSP 11 Grey 600 x 500 x 54 For the application on plasterboard walls please contact Raytech fire stop barrier for the pass through of plastic pipes Prefabricated metal collars for the closing of pass through of plastic tubes Available in a wide range of dimensions they are applied to surround the plastic tube and fixed to the wall Features Made of stainless steel they are supplied with internal gaskets made of intumescent mate rialt which expands in case of fire to completely close the plastic tube Approval e Up to class REI 180 for plasterboard walls refer to REI 120 e Non toxic asbestos and solvent free e In compliance with circular no 91 61 Installation They do not need particular care the opened collar is positioned around the cable supporting tube closed and fixed to the wall by means of plugs Product code Diameter mm FSC 11 From 40 to 110 FSC 12 From 140 to 160 FSC 13 200 For other dimensions and the installation in plasterboard walls please contact Raytech 4 FIRE STOP TAPE fire stop barrier in intumescent tape for the closing of the pass through of plastic tubes Preformed intumescent tape with high expansion properties for the closing of pass throughof plastic tubes PVC PE PP Geberit etc on walls It is surrounds the tube in the pass through the with the heat caused by the fire it expands to close all inters
12. allows the cable to pass through the me tallic covering of the thermal insulation avoiding abrasions and the moisture or water entry under the covering Cable gland It allows the cable to enter in boxes to pass through walls Support device for gutters and down pipes It supports and fixes the cable in gutters and down pipes For other accessories please contact Raytech C2000 C2000 SR e according to EN50014 and EN50019 standards Resistant to chemicals suitable for the exposure to mild inorganic so lutions Type of surfaces that can be traced steel painted surfaces stainless steel and plastic Box Box with IP 55 degree of protection com plete of terminal blocks Glass Fiber tape For the fixing of cables to the pipes 3 turns of adhesive tape every 0 3 meters 50 meter roll Aluminium SELF adhesive tape For the fixing of the cable 50 meter rolls Connection kit for classified areas Warning label To be applied for warning over traced C2000 SUG C2000 STG For ramps and stairs control unit C2000 operates only when connected to sensor C2000 SR For gutters and downpipes control unit C2000 operates only when connected to both sensors C2000 STG and C2000 SUG FIRE STOP barriers FIRE STOP BAG fire stop barrier in intumescent bags Intumescent incombustible bags which stop the passage of fire through openings in walls They are available in different sizes and they have to be placed to seal the
13. cs Made of a fireproof and intumescent material they have a standard length of 300 mm and a thickness of 25 mm Available for internal diameters from 15 to 170 mm In case of plastic tubes the expansion completely close the opening Approval e Up to class REI 120 e Non toxic and asbestos free e In compliance with circular no 91 61 Installation After the opening edges have been finished and cleaned the sleeve is cut to measure opened longitudinally inserted on the tube then positioned in the wall Ranges of use Product code Inner dimensions mm FSTP 25 25 FSTP 50 50 For other dimensions please contact Raytech Building and Thermoidraulic division 29 es PVC adhesive tape for electrical applications and mechanical protection for general use It is self extinguishing and does not propagate fire Conforms to UL510 CEI 15 15 CEI 60454 EN60454 VDE approved Rayteam 1925 19 mm 0 15 mm 25 mM Rayteam 1510 15mm 0 15 mm 10m Rayteam 2525 25mm 0 15 mm 25m Available colours black red blue grey white brown yellow green Rayteam 2525 is available only in black white and grey EPR self amalgamating taper for low and high voltage applications up to 72kV Conforms to ASTM D 4388 HH 1 553C Grade A MIL I 3825 B Available colour black Raytech 2 3 19mm 0 76 mm 9m ulila Ba Uh Insulating and sealing tape based on synthetic rubber applied on an EPR backing suitable for the covering a
14. er extremely confor mable flexible and elastic fire retardant with high dielec tric thermal mechanic and elastic characteristics Characteristics Non toxic and safe Fast in cross linking 7 minutes at 23 C Flame proof and fire retardant Low smoke and toxic and corrosive fumes emission Flexible and elastic High mechanical elastic and thermal properties It cross links at low temperature Accuracy on the reproduction of details Re enterable No shelf life Protection degree IP68 For installations up to 1 kV UV resistant and weatherproof Use sequence Magic Rubber 2 bottles for a total of 500 gr 1 small basin 1 mixing spoon Pour the 2 components 1 1 in a becker Mix the poured components Pour the product in the parti in the becker 30 sec max cular to be filled min max In a few minutes the product becomes rubber A Typical applications Universal branch kit IP68 suitable for any kind of installation also directly submerged Characteristics Great shock resistance Halogen free Non toxic and safe whether filled or empty No shelf life Re enterable even after long working periods Self extinguishing Suitable for any kind of installation also directly submerged thanks to the use of Magic Fluid Perfect for installation and filling in vertical Pre prepared knock out walls Package 1 box 1 cover with hook closin 4 insulating covering for screw heads 1 cap
15. erable SUPER MAGIC adhesive A single component adhesive gel for pro fessional use on metals wood paper cardboard and their derivates Ko MAGIC PLAST adhesive A single component adhesive and sea lant gel a complete solution for sticking fixing and sealing plastic glass ceramic cement plaster etc RAY FAST adhesive An instantaneous and invisible adhesive It glues ceramic metals hard stone hide leather plastic except polyethy lene polypropylene and PTFE wood rubber paper Magic Gel Two component gel in bottles fast in cross linking non toxic ad safe without shelf life with very dielectric and thermal characteristics Magic Rubber Bi component liquid insulating rubber in bottles fast in cross linking non toxic and safe without shelf life with very high electric mechanical and elastic charac teristics Magic Box Universal termination box IP68 which is suitable for any kind of installation also directly submerged US Ray Box Termination boxes IP55 with quick clo sing release cover system and pre pre pared knock out walls 14 Ray Press Metric and PG Cable gland 14 Self regulating heating cables E Fire Stop Fire stop barriers ig Rayteam Insulating tapes KI Raytech 2 3 Self amalgamating tape K3 Raysbar 28 Insulating and sealing tape 126 MCA ALL75 Self adhesive aluminium tape KO MCA FV Fiberglass adhesive tape Ha Ray fasc
16. ick repair of cracked or fissured bathroom pipes Flame retardant protection Gaskets for taps and kitchen pipes Quick repair of cracked or fissured kitchen pipes Wall and ceiling protection against fire where spotlights and lamps wall switches are installed Protection against fire of wall pass through of conduits and pipes Antifreeze protection and temperature maintenance of water fuels etc Sealing of technical passages and pipes even at high temperature Insulation of pipes and facilities against moisture condensate Insulation and fixing with high temperature tape Sealing of pipes and condensate water tanks even at high temperature Sticking and sealing of pipes and bell butt joints Building and Thermoidraulic division Two component insulating rubber in paste it is mouldable and fire retardant ideal to cover protect seal and make flame retardant any component Once mixing the two components 1 1 portion max 2 mi nutes to obtain and a uniform compound it quickly cros slinks at room temperature in less than 5 minutes Once moulded around the component to protect Sky Plast becomes shortly a rubber layer with high mechanical cha racteristics and strong fire resistance Characteristics e Non toxic and safe to use e Flameproof and Fire retardant e Low smoke and toxic and corrosive gases emission e Mouldable e Re enterable e Quickly ready for use e High mechanical and therma
17. inished and cleaned the sealant is applied with a spa tula for products in drums with a gun for silicone in case of products in cartridge or applied with a spatula or sprayed in case of the S type product Ranges of use Product code Package FSS 310 0 3 kg cartridge FSS 5 Spatula type 5 kg drumg FSS 15 Spatula type 15 kg drum FSS S 5 Spray or spatula type 5 kg drum For other dimensions or the application on plasterboard walls please contact Raytech s FIRE STOP FOAM fire stop barriers in expanding foam Sealing and expanding one component foam for the sealing of small openings in walls with a thickness of at least 100 mm The expanded volume of every can is about 45 It Characteristics Made of polyurethane fireproof foam charged with graphite it hardens when in contact with air Also Suitable for the protection of plasterboard walls Approval e Up to class REI 120 e Non toxic asbestos free they do not emit toxic gases or thick fumes e In compliance with circular no 91 61 Installation After the edges of the openings have been cleaned shake the can for at least 30 seconds then turn upside down and spray the product Ranges of use Product code Package FSF 700 700 ml can Ales m Building and Thermoidraulic division 21 KASI See x 7 FSM fire stop barriers in incombustible plaster Protective coating to seal and prevent fire propagation of openings in wal
18. l characteristics e Flexible and elastic Sky Plast 250 2 cans 250 gr total Sky Plast 2 cans 500 gr total Use sequence Take equal parts of the components from each can Mould pH the mixture i on oraround the component Mix max 2 minutes until a uniform compound is obtained The product becomes rubber in 5 minutes and it is ready a Typical applications on metals woods paper cardboard and their derivates Characteristics Flexible and elastic Very high adhesion between similar and dissimilar metals High adhesion to wood Non toxic and safe Application at room temperature Without using primer High tensile characteristics and ultimate tensile stress Thixotropic and self adhesive Skin formation within 5 hours allowing a long working period it cross links in 12 hours e Very sticky e Suitable for external exposition e Insulates and seals LV components O Typical applications MAGIC PLAST adhesive One component professional adhesive and sealant gel a complete solution for sticking fixing and sealing on pla stic glass ceramic cement plaster etc Characteristics e Non toxic and safe e Suitable for sticking and sealing of plastic materials plaster cement glass etc Suitable for indoor and outdoor use Flexible and elastic Paintable Resistant to mould chemicals weathering agents and UV radiation Warnings it is not suitable fo
19. ls it can be ap plied manually or sprayed It can be easily mixed in big quantities with suitable mixer e g concrete mixer Characteristics Made of mineral fibres it can be mixed with water also by means of concrete mixers Once applied product is insensitive to moisture Water quantity about 0 8 It kg volume 1 kg about 2 dm Approval e Up to class REI 180 e Non toxic asbestos and solvent free it does not emit toxic gases and dense fumes e In compliance with circular no 91 61 Installation After the edges of the openings have been finished and cleaned the incombustible plaster is mixed with water than applied manually with a spatula or a pump and left to dry in air Ranges of use Product code Package FSM 20 20 kg bag For other applications please contact Raytech s FSCP fire stop barriers for ceiling lights coverinG Incombustible barrier for the ceiling lights covering to maintain the integrity of the fire resi stance at ceilings Characteristics Made of non toxic mineral fire resistant fibres it avoids the propagation of the fire and re duces the temperature in the space between slabs and false ceiling Flexible light self supporting and easy to install and remove Approval e Up to class REI 120 Installation No special care is required The protection must be placed on the ceiling light grid adhering to the panel Ranges of use Product code Dimensions mm Weight
20. nd the sealing od tubes and their connections also when fissured Very high adhesion and sealing characteristics with high resistence to ozone and weathering Working temperature from 40 to 90 C Self adhesive aluminium tape for fixing on flat surfaces it is used also for holes or abrasion repairs on metallic or plastic surfaces Strong adhesion MCA ALL75 75 mm 0 06 mm 50 m t Self adhesive mono directional fibreglass tape with poly propylene support It is suitable for any kind of strong fixing Inextensible it is suitable for temperatures up to 130 MCA FV 12 mm 0 13 mm 50 m Cable ties self extinguishing according to UL94 UV resistant mainly the black coloured halogen free high resistance to the basis oils fats hydrocarbons chlorinated solvents Working temperature 40 85 C Ray fasc B 22 75 Ray fascN 22 75 22 75 Ray fasc B 25 98 Ray fasc N 25 98 24b 98 Ray fasc B 25 135 Ray fasc N 25 135 2 5 135 Ray fasc B 26 160 Ray fasc N 26 160 2 6 160 Ray fasc B 26 200 Ray fasc N 26 200 216 200 Ray fasc B 36 140 Ray fasc N 36 140 3 6 140 Ray fasc B 36 200 Ray fasc N 36 200 3 6 200 Ray fasc B 36 290 Ray fasc N 36 290 3 6 290 Ray fasc B 26 370 Ray fasc N 26 370 3 6 370 Ray fasc B 45 160 Ray fasc N 45 160 4 5 160 Ray fasc B 48 178 Ray fasc N 48 178 4 8 178 Ray fasc B 48 200 Ray fasc N 48 200 4 8 200 Ray fasc B 48 250 Ray fasc N 48 250 4 8 250
21. our Limpid colourless e Total setting time 24 hours e Setting speed on steel steel 10 20 sec e Cutting resistance sandblasted steel gt 15 N mm e Tensile strength sandblasted steel gt 18 N mm A Typical applications i X N r Af F Magic Gel Two component gel with high dielectric thermal and sealing characteristics contained in 2 bottles the needed quantity of the 2 components is poured in the small basin in the range of 1 1 than mixed with a mixing spoon and poured into the particular to be filled Characteristics Non toxic and safe Fast in cross linking 5 minutes at 23 C It cross links also at very low temperature Low viscosity Always re enterable No shelf life Protection degree higher than IP68 For installations up to 1 kV Volume resistivity gt 2x1015 Q cm Dielectric strength gt 20 kV mm Specific weight 0 96 gr cm Product code Kit composition Magic Gel 300 2 bottles for a total of 300 cc of product Magic Gel 1000 2 bottles for a total of 1 of product 1 small basin 1 mixing spoon Magic Gel 2000 2 bottles for a total of 2 product 1 small basin 1 mixing spoon Building and Thermoidraulic division Magic Gel 300 Magic Gel 2000 Pour the 2 components 1 1 ratio in a becker Mix the components 30 sec max Pour the product in the particular to fill 1 min max Bi component insulating liquid rubb
22. r gluing of PE PP bitumen acrylic glass and components on tension One component adhesive gel with high adhesion characteristics Properties e Colour Translucent e Working temperature C 60 150 e Shore A hardness 15 e Tensile strenght 1 1 MPa e Elongation at break 550 Product code Kit composition SUPER MAGIC adhesive In a 70 ml tube Elastic sealing of cracks Properties e Colour Translucent e Skin formation 10 15 minutes e Shore A hardness 60 e Tensile strenght 1 7 MPa e Elongation at break 250 e Working temperature C 40 100 e Cross linking 3 mm within 24 hours Product code Kit composition MAGIC PLAST adhesive In a 70 ml tube Typical applications Building and Thermoidraulic division T aa e Fixing of skirting board An instantaneous and invisible adhesive It rapidly glues ceramics metals hard sto nes plastic except polypropylene polyethylene and PTFE wood rubber paper It is very good for gluing immediately very small items it is perfect for repairing com mon usage objects knick knacks toys shoes costume jewellery white good frames eyeglasses etc Characteristics e Asingle component cyanoacrylic adhesive Instantaneous Invisible Perfect for the repair of common usage objects toys eyeglasses shoes Advantages e For strong fast and invisible bonding Suggestions e Apply on matching surfaces e Col
23. rd e Pre prepared knock out walls e Self extinguishing and fire abnormal heat resistance e Quick release cover Glow wire test at 750 C according to EN 60695 2 11 Product code Internal dimensions max knock Knock out no Max size of cable glands LxPxH mm out mm PG Metric Ray Box 100 100x100x50 29 8 21 25xX1 5 Ray Box 120 120x80x50 25 6 21 25x85 Ray Press Cable glands Metric Product code Metric assembly hole mm Diameter of the usable cables mm min max Ray PRESS 16 M16x1 5 16 6 10 Ray PRESS 20 M20x1 5 20 8 13 Ray PRESS 25 M25x1 5 25 12 18 De paso PG C digo art culo Paso PG agujero de montaje mm Di metro cables mm max Ray PRESS PG11 11 19 6 9 Ray PRESS PG13 5 13 5 20 9 12 Ray PRESS PG16 16 25 11 14 14 Building and Thermoidraulic division By exploiting a special physical principle the self regulating heating cables in contact with the external surface of products to be heated keep pipes tanks fire fighting systems stairs ramps sidewalks etc ice free or at the right temperature optimizing the installation and ser vice costs thanks to the self regulating conductive core which is the heating element of the cable which modulates the power output according to the room temperature Also available for exposition to chemicals up to 120 C working temperature for installa tion in safe or classified areas Advantages e The cable can be cut at the required length jointed or connected on
24. tices to prevent the fire propa gation Characteristics The tape is 1 m long and it can be cut to measure the remaining parts can be re used for other applications as the expansion due to the fire allows the adjacent pieces to give a con Approval e Up to class REI 180 e Non toxic asbestos and solvent free e In compliance with circular no 91 61 Installation They do not need particular care the tape is applied around the plastic tube according to the diameter between the tube and the hole in the wall It can be useful to seal the edges of the hole with FIRE STOP SEAL FSS sealant Ranges of use Product code Range of diameters on the tube mm Tape length 20 Building and Thermoidraulic division Intumescent tape Plastic tube FIRE STOP SEAL fire stop barrier in intumescent sealing mastic Intumescent mastic to seal and close small passages in walls also in addition to other types of barriers It is applied to seal the passage or to install barriers on cable ducts Characteristics Made of polymers fireproof fibres and intumescent non hygroscopic and thixotropic materials in water solution The S type more fluid can be sprayed or applied with a spatula Approval e Up to class REI 180 on plasterboard walls REI 120 e Non toxic asbestos and solvent free they do not emit toxic gases and dense fumes e In compliance with circular no 91 61 Installation After the edges of the openings have been f
Download Pdf Manuals
Related Search
Related Contents
Manual do Utilizador DS-820W/DS-920DW Stratagy DK Voice Mail PTM 200 User Manual Sistema radio-navegación MFD2 Télécharger - Vestel France RC004-16 NMS1 (REV.B) User Manual CasaTherm® W 1500/2000 Gold Transcend Memory JetRam 512MBsoDIMM DDR2 Copyright © All rights reserved.
Failed to retrieve file