Home

HT-CT350 - Sony Europe

1. sBuljes pooueapy olor buttons isplays an operation 20 Color b Display perati guide on the TV screen when the color buttons are available Follow the operation guide to perform a selected operation 26 Number buttons Selects channels and tracks directly For TV press and hold 14 TV yellow and press the number buttons to select channels For other components press and hold IE SHIFT and press the number buttons to select channels The 5 C and SOUND FIELD buttons or tracks have a tactile dot Use it as a guide during operation continued 4368 To control a TV While pressing and holding 14 TV yellow press the buttons with a yellow dot or yellow printing Remote Button Function 4 lt k Previous channel Returns to the channel previously watched for at least five seconds ja Unfo Text reveal In digital mode Displays brief details of the program currently being watched In analog mode Displays information such as current channel number and screen format In text mode Reveals hidden information e g answers to a quiz N TOOLS OPTIONS Enables you to access
2. Rear cover C Rear cover B 1468 8 Attach the cover for the TV supplied and cover 1 removed in step 1 Insert the two projecting parts of the cover for the TV into the holes on the TV For details on attaching cover 1 refer to the operating instructions of the TV e As a protective measure secure the TV For details see Preventing the TV from toppling over page 18 continued 1508 peyeys buije5 i Hanging the speaker and TV on a wall You can hang the speaker with the following TV models not supplied KDL 40 46LX9001 KDL 40 46NX80U KDL 40 46HX800 KDL 40 46EX700 KDL 40 46NX700 In the actual model names the L indicates numbers and or characters specific to each model e To hang the TV on the wall refer to the operating instructions of the TV 1 Remove covers 1 and 2 from the rear of the TV For details on removing the covers refer to the operating instructions of the TV e Some Sony TVs do not have cover 2 Cover 2 Cover 1 160 3 Secure the speaker to the extension bracket with the large screws PSW5 x 16 mm supplied 4 Reattach the TV Note e Make sure to place the TV on a soft thick cloth with the screen side down to prevent damaging the surface of the LCD 6 Hang the TV on the wall For details on hanging the TV on the wall refer to the operating instructions of the TV Note e When hanging the SS CT350 sp
3. Available sound fields Sound field Effect STANDARD Suits various sources MOVIE Recreates powerful and realistic sound along with clear dialog DRAMA Suited for TV dramas NEWS Produces the announcer s voice clearly SPORTS Produces the play by play commentary clearly and realistic sound with surround effects such as cheering etc GAME Produces powerful and realistic sound suited for playing video games MUSIC Suited for music programs or music videos on Blu ray Discs DVDs 2CH STEREO Suited for music CDs P AUDIO Suited to replay portable audio source These sound fields are not available when DMPORT is selected by pressing INPUT SELECTOR PB AUDIO appears only when DMPORT is selected e You can set a different sound field for each input source The sound field default setting for DMPORT is P AUDIO and for other sources STANDARD When DMPORT is selected by pressing INPUT SELECTOR the center speaker produces no sound the input signal such as monaural programs the center speaker produces no sound Some speakers will not produce sound depending on When 2CH STEREO or P AUDIO is selected If you press the THEATRE button on a Sony TV remote when CTRL HDMI is set to ON the sound field changes to MOVIE some Sony TVs excluded 37 uolouny punowns j BRAVIA
4. Rear of the S subwoofer e Do not place the AM loop antenna aerial near the system or other AV component as noise may result e Adjust the direction of the AM loop antenna aerial for best AM broadcast sound 4 Make sure the AM loop antenna aerial is connected firmly by pulling softly on the cord continued 2508 peyeys Guije5 i Connecting the FM wire antenna aerial Connect the FM wire antenna aerial to the FM 75 Q COAXIAL jack Rear of the subwoofer FM 75 Q COAXIAL jack or FM wire antenna aerial supplied a e Be sure to fully extend the FM wire antenna aerial e After connecting the FM wire antenna aerial keep it as horizontal as possible e Do not use the FM wire antenna aerial while it is bundled up e Insert the FM wire antenna aerial fully and firmly to the terminal e If you have poor FM reception use a 75 ohm coaxial cable not supplied to connect the subwoofer to an outdoor FM antenna aerial as shown below Rear of the subwoofer Outdoor FM antenna aerial FM 75a COAXIAL Connecting the AC power cord mains lead Before connecting the AC power cord mains lead of the system to a wall outlet mains connect all the other components and TV to the system a e After connecting the AC power cord mains lead wait about 20 seconds before turning on the power by pressing 1 0 e Connect the system to an easily accessible AC
5. x x E AAG S amp S SS DVD IN BD IN SATICATV IN WOUT fera SS CT350 R CENTER L Green Red Speaker Q Speaker cord supplied 2168 peyeys Buma i Connecting the TV and player etc Connect the TV and or player etc with HDMI jacks to the system using an HDMI cable By connecting Sony BRAVIA Sync compatible components using HDMI cables and by setting the Control for HDMI function via the TV for each connected component operation can be simplified See BRAVIA Sync Features page 38 DVD player etc TV HDMI cable HDMI OUT not supplied HDMI cable C not supplied HDMI IN ap Digital Audio OUT Rear of the o o optical subwoofer Digital optical cord for a TV HDMI supplied SS a SS S DVDIN BDIN SAT CATV IN TVOUT Satellite tuner or cable television tuner etc with an HDMI jack Ke o Q 9 Blu ray Disc player Digital Audio OUT optical Digital optical cord not supplied HDMI OUT HDMI OUT ap css HDMI cable HDMI cable O not supplied not supplied 2268 Notes e The system is compatible with the Audio Return Channel ARC function If you connect the system to the ARC compatible TV s HDMI jack via an HDMI cable you do not need to connect the TV to the syst
6. N EEO Press T X or gt to select the menu items Then press to enter the selection Enjoying TV Press to adjust the volume SOUND FIELD page 37 suondo y eq eld i TVI THEATRE D0 AVO AN 1O E aes ae 24 6 VO of 28 9 5 eE CLEAR o O ENTER POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG 3 _bISPLAY RETURN EXIT sHOME OPTIONS TUNING TUNING PRESET PRESET PROG e lt SOUND FIELD The 5 amp OD and SOUND FIELD buttons have a tactile dot Use it as a guide during operation 1 1 on standby 2 Input buttons Press one of the buttons to select the component you want to use 3 AMP MENU page 48 aD O a CH RETURN EXIT TUNING PRESET HOME AMP MENU eTOOLS OPTIONS TUNING PRESET PROG lt 1 SOUND FIELD 1 Turn on the TV and choose a program Refer to the operating instructions of your TV for details A 6 PO Turn the system on Press TV on the remote Adjust the volume by pressing 4 continued 2968 e The sound may be output from the TV s speaker In this case turn the volume of the TV s speaker down to minimum If you are using BRAVIA Sync System Audio Control You do not need to perform steps 2 and 3 above When you turn on the TV the system is also turned on and the input source
7. Sync Features What is BRAVIA Sync By connecting Sony components that are compatible with BRAVIA Sync via an HDMI cable not supplied operation is simplified as below e One Touch Play page 39 e System Audio Control page 40 e System Power Off page 41 BRAVIA Sync is compatible with Sony TVs Blu Ray Disc DVD players AV amplifiers etc with the Control for HDMI function CONTROL FOR HDMI is a mutual control function standard used by CEC Consumer Electronics Control for HDMI High Definition Multimedia Interface The Control for HDMI function will not operate correctly in the following cases e When you connect the system to components which do not correspond with the Control for HDMI function e When you connect the system and components using other than an HDMI connection e When you connect non Sony components which are compatible with the Control for HDMI function We recommend that you connect products featuring BRAVIA Sync to this system e Depending on the connected components the Control for HDMI function may not work Refer to the operating instructions of the components 38 48 Preparing for BRAVIA Sync To use BRAVIA Sync set the Control for HDMI function to on for the connected components When you connect a Sony TV with the Control for HDMI function the Control for HDMI function for the system and the connected components can be set simultaneo
8. afr Ww Na 6 Select the input of the system connected to the component you want to use the Control for HDMI function for SAT CATV DVD BD 7 Set the Control for HDMI function of the connected component to on For details on setting the connected component refer to its operating instructions If you add or reconnect a component Perform steps of Preparing for BRAVIA Sync page 38 and If COMPLETE does not appear after performing the steps above again Notes If the Control for HDMI function for the connected component cannot be set simultaneously by setting CONTROL FOR HDMI of the TV set the Control for HDMI function using the menu of the connected component e For details on setting the TV and the connected components refer to their operating instructions Tip e The default setting of the Control for HDMI function of the system is ON Setting the Control for HDMI function to off Set the Control for HDMI function to off when you connect components not compatible with BRAVIA Sync or that do not have HDMI jacks etc POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG E DISPLAY aD E Ca A T BO soinjeed UAS WIAVHG i AMP MENU Press AMP MENU Press t repeatedly until SET HDMI appears then press or gt Press T to select CTRL HDMI then press or gt Press t to select OFF Press AMP MENU The
9. Blu ray Disc recorder gt The initial setting of the DVD button Sony DVD recorders are operated with a DVD1 or DVD3 setting For details refer to the operating instructions supplied with the DVD recorders The initial setting of the SAT CATV button To clear all remote button assignments While holding down 4 press I and 2 Then release the buttons The remote is reset to its initial settings 47 sbuijes pooueapy il Settings and adjustments using the amplifier menu Using the AMP menu You can set the following items with AMP MENU on the remote The default settings are underlined AMP MENU LEVEL CNT 6 5 0 LEVEL 5 6 m SW LEVEL 6 5 0 w 5 6 AUDIO MAX DRC STD OFF TONE BASS 6 5 0 5 6 TREBLE 6 5 0 5 6 AUDIO A V SYNC ON OFF DUAL MAIN MONO SUB MAIN SUB NIGHT ON MODE OFF INPUT AUTO MODE OPT ages SET CTRL ON HDMI HDMI L OFF t VOL MAX 49 48 LIMIT 2 1 MIN PASS AUTO THRU ON ARC ON L OFF _ SYSTEM DIMMER ON L OFF DISPLAY ON L OFF SLEEP OFF 10M 20M 80M 90M AUTO ON STBY L OFF See BRAVIA Sync Features page 38 This setting appears only when CTRL HDMI is set to ON POP UP TOP MENU MENU MEMORY
10. e Before operating the system check that the operating voltage is identical to your local power supply The operating voltage is indicated on the nameplate at the rear of the subwoofer e If you are not going to use the system for a long time be sure to disconnect the system from the wall outlet mains To disconnect the AC power cord mains lead grasp the plug itself never pull the cord e AC power cord mains lead must be changed only at the qualified service shop On heat buildup Although the system heats up during operation this is not a malfunction If you continuously use this system at a large volume the system temperature of the back and bottom rises considerably To avoid burning yourself do not touch the system On placement e Place the system in a location with adequate ventilation to prevent heat buildup and prolong the life of the system e Do not place the system near heat sources or in a place subject to direct sunlight excessive dust or mechanical shock e Do not place anything at the rear of the subwoofer that might block the ventilation holes and cause malfunctions e Do not place the system near equipment such as a TV VCR or tape deck If the system is being used in combination with a TV VCR or tape deck and is placed too close to that equipment noise may result and picture quality may suffer This is especially likely when using an indoor antenna Therefore we recommend using an outdoor
11. 18 4 494 Selects a menu item and enters the selection 2 D Selects the audio format track 24 Selects the subtitle language when multilingual subtitles are recorded on a BD ROM DVD VIDEO 23 TOP MENU Displays the top menu disc menu 24 POP UP MENU Displays the BD ROM s Pop up Menu or the DVD s menu To control the HDD DVD COMBO Remote Button Function 6 PS Switches to other viewing angles when multi angles are recorded on a DVD VIDEO 23 TOP MENU Displays the top menu disc 9 lt gt To fast reverse or to fast menu forward the disc when 24 POP UP MENU Displays the BD ROM s pressed during playback Pop up Menu or the 10 lt gt PI To specify the previous or DVD s menu next chapter or track 11 playback Ml Play mode buttons pause press again to resume normal playback stop 18 47494 Moves the highlight cursor and selects the item Selects the audio format track 21 OD 2 Selects the subtitle language when multilingual subtitles are recorded on a BD ROM DVD VIDEO Displays the top menu disc 23 TOP MENU menu Displays the BD ROM s Pop up Menu or the DVD s menu sBuijes pooueapy il 24 POP UP MENU To control the SAT Remote Button 8 MENU HOME iag e t 4 9 G 19 amp Gu
12. D TUNING DIGITAL ANALOG E DISPLAY amp CLCC Ea Press AMP MENU to turn on the AMP menu Press 4 gt repeatedly to select the item and the setting Press AMP MENU to turn off the AMP menu N e These settings are retained even if you disconnect the AC power cord mains lead The following pages show details for each setting Setting the speaker level CNT LEVEL SW LEVEL You can adjust the level and the balance of the center speaker and subwoofer 1 Select LEVEL in the AMP menu then press or gt 2 Select CNT LEVEL or SW LEVEL then press or gt e CNT LEVEL Adjusts the center speaker level e SW LEVEL Adjusts the subwoofer level 3 Select the parameter you want and press The parameter of CNT LEVEL and SW LEVEL is from 6 to 6 in 1 step increments The default setting is 0 Enjoying Dolby Digital sound at low volume AUDIO DRC Narrows the dynamic range of the sound track Useful for enjoying movies at low volume AUDIO DRC only applies to Dolby Digital sources 1 Select LEVEL in the AMP menu then press or gt 2 Select AUDIO DRC then press or gt 3 Select the setting and press e OFF No compression of dynamic range e STD Reproduces the sound track with the kind of dynamic range that the recording engineer intended e MAX Compresses dynamic range fully Adjusting t
13. Press 7t repeatedly until ARC appears then press G or gt 4 Press t to select OFF ON The ARC function turns on OFF The ARC function turns off D press AMP MENU The AMP menu turns off Note e When CTRL HDMI is set to OFF the ARC function and its setting are not available To control the component Advanced Settings 1 Press one of the input buttons 3 BD DVD SAT CATV TV VIDEO or Controlling connected DMPORT to select the component you want to operate Sony components with the The component assigned to the selected remote input button becomes operable 2 Referring to the following table press You can control connected Sony components the corresponding button for the operation with the remote of this system Some functions may not be selectable depending Common operations on the equipment In that case select them using the remote control supplied with the equipment nemore Bullen Function 1 TV Turns on or off the Sony AVVO TV or audio video on standby components that the remote is assigned to operate Press 1 TV I O AV 1 0 and 2 1 at the same time to turn off the system and all other components that the remote is assigned to operate SYSTEM STANDBY 4 ENTER Enters the selection While pressing and holding 13 SHIFT press 4 ENTER 18 t v gt Selects a menu item and enters the selection
14. antenna e Use caution when placing the system on surfaces that have been specially treated with wax oil polish etc as staining or discoloration of the surface may result On operation Before connecting other components be sure to turn off and unplug the system If you encounter color irregularity on a nearby TV screen The system is magnetically shielded to allow it to be installed near a TV set However color irregularities may still be observed on certain types of TV sets If color irregularity is observed Turn off the TV set then turn it on again after 15 to 30 minutes If color irregularity is observed again Place the system further away from the TV set On cleaning Clean the system with a soft dry cloth Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine If you have any question or problem concerning your system please consult your nearest Sony dealer Copyrights This system incorporates Dolby Digital and Pro Logic Surround and the DTS Digital Surround System Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS Digital Surround and the DTS logos are tr
15. install the products over or under an air conditioner If the products are exposed to wind from the air conditioner for an extended period of time or get wet by water leakage from the air conditioner this may cause a fire an electric shock or malfunctions 9 E 10 Do not allow the cords to be pinched e If the AC power cord mains lead or connecting cords are pinched between the products and the wall floor or other object or bent or twisted by force the internal conductors may become exposed and cause a short circuit or an electrical break This may cause a fire or an electric shock e Do not step on the AC power cord mains lead or connecting cords when you carry the products The cord may be damaged and this may result in a fire or electric shock Do not cover the ventilation holes of the products e If you cover the ventilation holes with a cloth etc heat may build up inside and cause a fire Do not stumble over the cords e You may trip or may cause the products to topple over and cause injury CAUTION If the following precautions are not observed injury or property damage may occur Do not install any equipment other than the specified product e The WS CT350EB accessories supplied are designed for use with the specified equipment only If you install equipment other than that specified it may fall or break and cause injury e Do not m
16. or a cable television tuner etc set CTRL HDMI to OFF in the AMP menu of the system page 39 Other audio components etc DVD player etc Ske a6 Digital Audio OUT Audio cord Digital coaxial cord coaxial not supplied not supplied i gt VIDEO OUT as H To the VIDEO IN of the TV Rear of the fe subwoofer Satellite tuner or cable television tuner etc without an HDMI jack Digital Audio OUT optical DIGITAL MEDIA PORT adapter ere Digital optical cord notsuppiied To the VIDEO IN of the TV e Do not connect or disconnect the DIGITAL MEDIA PORT adapter while the system is turned on e When you connect the DIGITAL MEDIA PORT adapter be sure the connector is inserted with the arrow mark facing toward the arrow mark on the DMPORT jack To detach the DIGITAL MEDIA PORT adapter press and hold and then pull out the connector 2468 Connecting the antenna aerial Connecting the AM loop antenna aerial The shape and the length of the antenna aerial is designed to receive AM signals Do not dismantle or roll up the antenna aerial 1 Remove only the loop part from the plastic stand 2 Set up the AM loop antenna aerial 3 Connect the cords to the AM antenna aerial terminals While pushing down the terminal clamp insert the part of the cords The cords can be connected to either terminal
17. outlet mains Should you notice an abnormality in the system disconnect the main plug from the AC outlet mains immediately Setting up the sound output of the connected component To enjoy sound in multi channel format DTS Dolby Digital multi channel LPCM you need to make the audio output settings of the connected component Set the connected component to output sound in multi channel format For details on audio output settings refer to the operating instructions supplied with the connected component 2608 Playback Options Index to parts and controls a 2 For more information see the pages indicated in parentheses za z Subwoofer Q S Top view 2 3 4 n 1 1 on standby 3 VOLUME 2 INPUT SELECTOR 4 VOLUME Press to select the input source to play back 5 Front panel display Every time you press the button the input source changes cyclically as follows TV gt BD DVD gt SAT CATV VIDEO SA CD CD TUNER FM gt TUNER AM DMPORT gt TV continued 2768 Front panel display subwoofer E O POWER ACTIVE STANDBY POWER ACTIVE STANDBY indicator Lights as follows Green Amber The system is turned on Only HDMI parts of the system are on The Control for HDMI function is working No light The system is turned off N
18. turn off the system and check the following item after STANDBY disappears e Is anything blocking the ventilation holes of the system After checking the above item and fixing any problems turn on the system If the cause of the problem cannot be found even after checking the above item consult your nearest Sony dealer If the system still does not operate properly after performing the above measures reset the system as follows Use buttons on the system for the operation 1 Press I to turn on the power 2 Press I 5 while pressing INPUT SELECTOR and VOLUME COLD RESET appears and the system is reset AMP menu sound field etc return to the default settings 5460 Specifications Formats supported by this system Digital input formats supported by this system are as follows Format Supported Not supported Dolby Digital O DTS O Linear PCM 2ch O Linear PCM 5 1ch O 7 1ch Only on HDMI Dolby Digital Plus x Dolby True HD x DTS HD Linear PCM accepts sampling frequencies of no more than 48 kHz Amplifier section Power output rated Front L Front R 65 W 65 W at 4 ohms 1 kHz 1 THD Power output reference Front L Front R 100 W per channel at 4 ohms kHz Center 100 W at 4 ohms 5 kHz Subwoofer 100 W at 4 ohms 100 Hz Inputs TV SA CD CD Analog TV SAT CATV Digital Optical VIDEO Digital Coaxial HDMI sectio
19. various viewing options and change make adjustments according to the source and screen format MENU HOME Allows you to select channels or input sources and change the settings for your TV ine PROG E EY In TV mode Selects the next or previous channel In text mode Selects the next G4 or previous E page 15 OX Muting Turns off the sound Remote Button Function 25 Text Displays text 27 THEATRE Automatically sets the optimal picture settings for watching movies such as low light settings when you connect a Sony TV that is compatible with the THEATRE button function Also audio is automatically switched to the audio output of this system when you connect the TV and the system with HDMI connection and the Control for HDMI function is set to on 28 Input select Text hold In TV mode Selects input In analog text mode Holds the current page To control the DVD recorder Blu ray Disc recorder Remote Button Function 6 PS Switches to other viewing angles when multi angles are recorded on a DVD VIDEO 8 MENU HOME Displays the menu 9 lt lt gt gt To fast reverse or to fast forward the disc when pressed during playback 10 lt gt PI To go to the beginning of the previous or next chapter or track 11 pl
20. via the system you need to set the speaker settings of the TV to output the sound from external audio equipment For details refer to the operating instructions of the TV The system is not turned on when you turn the TV on if sound was being output from the TV speakers the last time the TV was turned off The System Power Off function does not work e Change the setting of the TV to turn connected components off automatically when you turn off the TV For details refer to the operating instructions of the TV The system is turned off when you turn off the TV e When the Control for HDMI function is on the System Power Off function is active and the system is turned off when you turn off the TV The system is turned off automatically e The AUTO STBY function is working page 51 5260 SOUND Dolby Digital or DTS multi channel sound is not reproduced e Check that the Blu ray Disc DVD etc is recorded in Dolby Digital or DTS format e When connecting the Blu ray Disc DVD player etc to the digital input jacks of this system check the audio setting settings for the audio output of the connected component The surround effect cannot be obtained e Depending on the digital signal the surround processing may not work page 37 Press DISPLAY to show the sound format in the front panel display If 2 0CH or 1 0CH is displayed in the front panel display the signal is stereo or mona
21. AMP menu turns off Enjoying Blu ray Disc DVD One Touch Play ofr GO Na Play back a connected component The TV turns on automatically and switches to the appropriate HDMI input continued 3948 Tip e Even if the system is turned off active standby mode the HDMI signal will be sent from the connected component to the TV via the HDMI connection You can enjoy image and sound of the component on the TV e Depending on the TV the start of the content may not be output Enjoying the TV sound from the system System Audio Control You can enjoy the TV sound from the speakers of the system by means of a simple operation You can also adjust the volume and turn off the sound of the system using the TV remote For details refer to the operating instructions of the TV TVI 17 THEATRE D AVI O Vo Vo TEM CJ eSciear 0 10 POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG 3 _bIsPLay AMP MENU AMP MENU ET 4 3 Press I to turn on the system The sound is output from the speaker of the system Sound output reverts to the TV s speaker when you turn the system off 40 e When the TV is turned on before this system is turned on the TV sound will not be output for a moment e Depending on the TV when you adjust the system s volume using TV s remote the volume level appears on the TV screen in the same way it would appear when you adjust the TV s volume In this cas
22. HOME TH MENU TUNING PRESET PRESET PRESET Ssh 1 Press TUNER repeatedly until TUNER FM or TUNER AM appears in the front panel display The last received station is tuned in continued 33 GB suoloung Jouny i 2 Press PRESET repeatedly to select the preset station Each time you press the button the system tunes in one preset station You can select the preset number directly by pressing the number buttons while pressing and holding SHIFT 3 Adjust the volume by pressing 1 To turn off the radio Press I C to turn off the system or change to another function To listen to non preset radio stations Use manual or automatic tuning in step 2 For manual tuning see Direct tuning page 32 For automatic tuning press and hold TUNING The automatic tuning stops when the system tunes in a station To stop the automatic tuning while automatic tuning is in progress press TUNING If an FM program is noisy If an FM program is noisy you can select monaural reception There will be no stereo effect but reception will improve T Press MENU 2 Press t repeatedly until FM MODE appears in the front panel display then press or gt 3 Press t to select MONO e STEREO Stereo reception e MONO Monaural reception 4 Press G The setting is made D Press MENU Tip e To improve reception reorient the FM wire antenna a
23. S ONY 4 181 486 21 1 Home Theatre System Operating Instructions HT CT350 mae Sdts Homi CARDS S FORCC S MAaSTer EO DIGITAL a ee Sins xv Colour fort 2010 Sony Corporation Do not install the appliance in a confined space such as a bookcase or built in cabinet To reduce the risk of fire do not cover the ventilation opening of the apparatus with newspapers tablecloths curtains etc Do not place the naked flame sources such as lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus The unit is not disconnected from the mains as long as it is connected to the AC outlet even if the unit itself has been turned off As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine fire or the like In door use only Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems STs This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it
24. TV stand page 12 For details see Hanging the speaker and For details see Installing the speaker on TV on a wall page 16 a wall page 20 e Do not block the heat ventilation on the rear panel of the subwoofer continued 7 peyeys Buma i Connecting the speaker cord to the speaker The connectors of the speaker cord are color coded depending on the type of speaker Connect the connectors of the speaker cord to match the color of the speaker jacks 1 Remove the screw of the cover at the rear of the speaker and then remove the cover Rear of the speaker R_CENTER L Q Speaker cord supplied 3 Guide the speaker cord through the square notch at the bottom of the cover and then reattach the cover to the speaker and secure it with the screw removed in step 1 If you install the speaker to the TV do not reattach the cover Perform the steps in Installing the speaker on the TV stand page 12 or Hanging the speaker and TV on a wall page 16 Notes e When you install the speaker or a TV on a wall be careful not to stumble over the cord connected to the speaker e Be careful not to pinch the speaker cord when you reattach the cover 8e Warning about installing the system s speaker to the TV stand or a wall To Customers Sufficient expertise is required for installing this product Be sure to subcontract the installation to Sony dealers or li
25. ademarks of DTS Inc Product includes software DTS Inc All Rights Reserved This system incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries BRAVIA Sync is a trademark of Sony Corporation PlayStation is a registered trademark of Sony Computer Entertainment Inc x v Colour x v Color and x v Colour x v Color logo are trademarks of Sony Corporation 368 Table of contents PreCaUtiOns cniri 3 Getting Started Unpacking eeina cies aans 5 Positioning the system ceseseeeeeees 7 Warning about installing the system s speaker to the TV stand or a wall 9 Connecting the speaker 21 Connecting the TV and player etc 22 Connecting other components Connecting the antenna aerial Connecting the AC power cord mains Tea yiccie Quo E EAE EA 26 Setting up the sound output of the connected component eee 26 Playback Options Index to parts and controls ee 27 Enjoying TV 4 00en ih ated ney 29 Enjoying other components 30 Tuner Functions Direct tuning renatin 32 Presetting radio stations 0 0 0 33 Listening to the radio eee 33 Naming preset stations 0 cece 34 Viewing the station name or frequency in the front panel di
26. ayback i i 16 a Adjusts the volume 17 4 gt RETURN EXIT Returns to the previous screen of any displayed menu zl Tt 4 gt Selects a menu item and enters the selection 19 Guide Displays the guide when you are watching analog or digital channels 21 OD Selects the audio format track 23 DIGITAL Changes to digital mode 24 ANALOG Changes to analog mode 44 8 pause press again to resume normal playback MM stop Play mode buttons ia t gt C Selects a menu item and enters the selection 2 OD Selects the audio format track Ze Selects the subtitle language when multilingual subtitles are recorded on a BD ROM DVD VIDEO Remote Button Function Remote Button Function To control the DVD player Blu ray Disc player Remote Button Function 6 PS Switches to other viewing angles when multi angles are recorded on a DVD VIDEO 8 MENU HOME Displays the menu 9 lt p gt To fast reverse or to fast forward the disc when pressed during playback 10 lt gt PI To go to the beginning of the previous or next chapter or track 11 playback Ml pause press again to resume normal playback MM stop Play mode buttons
27. censed contractors and pay special attention to safety during the installation Sony is not liable for any damages or injury caused by mishandling or improper installation or installing anything other than the specified product Your statutory rights if any are not affected On Safety Products by Sony are designed with safety in mind If the products are used incorrectly however it may result in a serious injury through fire electric shock the product toppling over or the product dropping Be sure to observe the precautions for safety to prevent such accidents WARNING If the following precautions are not observed serious injury or death through fire or electric shock the product toppling over or falling can result Do not drop the products or install them where there is a possibility of them falling down e Be sure to subcontract installing moving or dismounting the products to licensed contractors and keep small children away during the procedure e Unauthorized installation may result in serious injury or property damage e Having an unauthorized dealer carry or dismount the SS CT350 speaker or SS CT350 speaker installed TV may lead to the products falling and result in serious injury or property damage Make sure that two or more persons carry or dismount the product s e Do not remove screws etc after mounting the SS CT350 speaker or SS CT350 speaker installed TV e Do not handle the products
28. changes automatically You can also adjust the system s volume using the TV s remote If you turn off the system sound is output from the TV s speaker For details on setting BRAVIA Sync see Preparing for BRAVIA Sync page 38 Tip e The system is not turned on when you turn the TV on if sound was being output from the TV speakers the last time the TV was turned off Enjoying other components TVIZ 17 THEATRE AVI O O Input buttons POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG _ Q 3 _bIsPLay Coc IC Ie AMP MENU RETURN T00L8 exit SHOME OPTIONS MENU TUNING TUNING PRESET PRESET PROG lt 1 sound FIELD 1 Play the connected component 2 Turn on the system 304 3 Press the input buttons to display the input source in the front panel display Input source Playable component TV TV etc connected to the TV jack BD Blu ray Disc player etc connected to the BD jack DVD DVD player etc connected to the DVD jack SAT CATV Satellite tuner or cable television tuner etc connected to the SAT CATV jack VIDEO DVD player etc connected to the DIGITAL COAX IN VIDEO jack SA CD CD CD player etc connected to the SA CD CD AUDIO IN jack TUNER FM The built in FM radio TUNER AM The built in AM radio DMPORT Portable audio player etc connected to the DMPORT jack Press TUNER repeatedly to sw
29. ct AUDIO in the AMP menu then press or gt 2 Select DUAL MONO then press or gt 3 Select the setting and press 4 e MAIN Plays back only the main channel e SUB Plays back only the sub channel e MAIN SUB Main sound is output from the left speaker and sub sound is output from the right speaker Enjoying the sound at low volume NIGHT MODE You can enjoy sound effects and hear the dialog clearly even at a low volume level using this function 1 Select AUDIO in the AMP menu then press or gt 2 Select NIGHT MODE then press or gt 3 Select the setting and press ON Turns on the NIGHT MODE function OFF Turns off the function Tip e You can listen to Dolby Digital sound at low volume by using AUDIO DRC page 49 5062 Setting the sound from the satellite tuner INPUT MODE Even if you connect the satellite tuner to the HDMI SAT CATY input jack of the system multi channel sound may not be output depending on the satellite tuner In this case connect a digital optical cord to the SAT CATV OPT IN jack of the system in addition to an HDMI cable and make the following setting 1 Select AUDIO in the AMP menu then press or gt 2 Select INPUT MODE then press or gt 3 Select OPT and press e AUTO Preferentially output the sound signal from the HDMI SAT CATV input jack e OPT Output the signal from
30. e the volume level that appears on the TV screen and the system s front panel display may differ Using the Volume Limit function When the System Audio Control function is active and the output method changes from the TV speaker to the system speakers automatically loud sound may be output depending on the volume level of the system You can prevent this by limiting the volume level T Press AMP MENU Press t repeatedly until SET HDMI appears then press or gt 3 Press t repeatedly until VOL LIMIT appears then press or gt Press to select the volume limit you want The volume limit changes as follows MAX lt gt 49 gt 48 2 gt 1 gt MIN 5 Press AMP MENU The AMP menu turns off Notes e This function is available only when the Control for HDMI function is set to on e This function is not available when the output method changes from the system speakers to the TV speaker e We recommend that you set the volume limit to a little lower than the volume you usually listen to e Regardless of the volume limit you set the VOLUME buttons of the system and the 4 buttons of the remote are operable e If you do not want to limit the volume level select MAX Turning off the system TV and the connected components System Power Off When you turn the TV off by using the power button on the TV s remote the system and the connected c
31. eaker on the TV stand following this procedure 1 Remove covers 1 and 2 from the rear of the TV For details on removing the covers refer to the operating instructions of the TV e Some Sony TVs do not have cover 2 Cover 2 Cover 1 2 Remove the screws of the TV and then detach the TV from the TV stand Note e Make sure to place the TV on a soft thick cloth with the screen side down to prevent damaging the surface of the LCD 1268 3 Secure the extension bracket supplied to the TV stand with the large screws PSW5 x 16 mm Supplied Extension bracket 4 Secure the speaker to the extension bracket with the large screws PSW5 x 16 mm supplied 5 Reattach the TV continued 1348 peyeys buije5 i 6 Secure the TV with the screws removed in step 2 7 Attach the rear covers A B and C supplied Secure the rear cover A to the extension bracket with the small screw M3 x 8 mm supplied Guide the speaker cord through the rectangular notch of the rear cover B and insert the three projecting parts of the rear cover B into the holes on the extension bracket and the speaker Insert the three projecting parts of the rear cover C into the holes on the extension bracket and the speaker Note e When carrying the SS CT350 speaker installed TV do not hold it by the SS CT350 speaker part Doing so may cause damage or injury Rear cover A
32. eaker installed TV on the wall or taking it off the wall do not hold it by the SS CT350 speaker part Doing so may cause damage or injury continued 17 peyeys buije5 i Preventing the TV from toppling over As a protective measure secure the TV If you fail to do so the TV may topple over resulting in serious injury When installing the TV on a rack Screw for the support belt PSW4 x 20 mm Wood screw for the support belt M3 8 x 20 mm Place the TV on the center of the rack N Fit the support belt supplied to the TV then firmly fasten with the screw for the support belt PSW4 x 20 mm supplied using a screw driver ao Fasten the support belt to the rack with the wood screw for the support belt M3 8 x 20 mm supplied e Be careful not to pinch your fingers when setting up the TV and rack e Install the rack after allowing for a space of less than 25 cm from the wall The wall will prevent the TV from falling from the rack even if the TV leans backward towards the wall Side view Less than 25 cm X 1808 When installing the TV on the floor near a wall Prepare strong string or chain not supplied and a fastener not supplied for fastening to the wall Secure the fastener to a reinforced wall 1 Fasten the clamp screws supplied to the rear of the TV L Clamp screw 2 Secure the fastener to the wall and then thread the string or chain th
33. ed components the system and the TV are also turned on and the input source changes automatically You can also adjust the system s volume using the TV s remote For details on setting BRAVIA Sync see Preparing for BRAVIA Sync page 38 e The system is not turned on when you turn the TV on if sound was being output from the TV speakers the last time the TV was turned off 31 suondo y eq ejd Tuner Functions Direct tuning You can enter the frequency of a station directly using the number buttons TVI l THEATRE AVI O VQ Number buttons TUNER ENTER D TUNING DIGITAL ANALOG 3 DISPLAY ICJIA AMP MENU RETURN TOOLS EXIT sHOME OPTIONS TUNING TUNING JC PRESET PRESET PR lt lt 1 SOUND FIELD 1 I e i TV SHIFT O SHIFT lt i 8 l 6 ha Tah o Aia GE 1 Press TUNER repeatedly until TUNER FM or TUNER AM appears in the front panel display 2 Press D TUNING 3260 3 While pressing and holding SHIFT press the number buttons to enter the frequency Example 88 00 MHz While pressing and holding SHIFT select 8 8 0 0 4 While pressing and holding SHIFT press ENTER e If you have tuned in an AM station adjust the direction of the AM loop antenna aerial for optimum reception If you cannot tune in a station Make sure you have entered the right frequency I
34. em with the digital optical cord page 42 e You can see the letters ARC beside the TV s HDMI jack if it is compatible with the ARC function Even if you connect an HDMI cable to the jack if the HDMI input jack is not compatible with the ARC function you cannot use the ARC function e The ARC function is available only when Control for HDMI is set to on e Depending on the satellite tuner multi channel sound may not be output In this case connect a digital optical cord in addition to an HDMI cable and set INPUT MODE to OPT in the AMP menu page 50 e Connect a PlayStation 3 etc to any available HDMI jack All the HDMI jacks on the system function in the same way e The HDMI jack connections have priority when you connect different components to the system using the INPUT OPT INPUT COAX and HDMI jacks e When connecting a TV that does not have a digital optical audio output jack connect the TV to the system using an analog audio cord not supplied Tip e Even if the system is turned off active standby mode the HDMI signal will be sent from the connected component to the TV via the HDMI connection You can enjoy image and sound from the component on the TV Notes on HDMI connections e Use a High Speed HDMI cable If you use a Standard HDMI cable 1080p Deep Colour or 3D images may not be displayed properly e Sony recommends that you use an HDMI authorized cable or Sony HDMI cable e Check the setup
35. erial supplied 346 Naming preset stations You can enter a name for preset stations These names for example XYZ appear in the front panel display when a station is selected You can enter a name of up to 10 characters Note that no more than one name can be entered for each preset station Note e You cannot enter a name for a preset station for which a Radio Data System RDS broadcast is received page 35 TVI THEATRE avi o Q COCO oe WON C2 Gel Go ek J A TUNER ee CLEAR e0 10 9 ENTER CLEAR POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG DISPLAY T 4 9 RETURN TOOLS Rex HOME OPTIONS MENU TUNING TUNING xa e PRESET of PRESET SHIFT 1 Press TUNER repeatedly until TUNER FM or TUNER AM appears in the front panel display The last received station is tuned in 2 Press PRESET repeatedly to select the preset station you want to create a name for 3 Press MENU 4 Press t repeatedly until NAME IN appears in the front panel display TUNED ST Press Create a name by using gt o1 Press 4 to select a character then press gt to move the cursor to the next position Letters numbers and other symbols can be input for a radio station name If you enter a wrong character Press gt repeatedly until the character to be changed flashes then press t
36. ermanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Notice for customers the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents Precautions On safety e Should any solid object or liquid fall into the system unplug the system and have it checked by qualified personnel before operating it any further e Do not climb on the subwoofer as you may fall down and injure yourself or system damage may result On power sources
37. f not repeat steps 2 to 4 If you still cannot tune in a station it is likely that the frequency is not used in your area Presetting radio stations You can preset 20 FM and 10 AM stations Before tuning make sure to turn down the volume to minimum TVI co oe AIO ce E STANDBY Ea TUNER eS CLEAR 0 10 ENTER POP UP TOP MENU MENU MEMORY D TUNING CIC E C DISPLAY MEMORY H ANALOG Ee AMP MENU RETURN TOOLS EXIT sHOME OPTIONS MENU TUNING TUNING TUNING 1 Press TUNER repeatedly until TUNER FM or TUNER AM appears in the front panel display 2 Press and hold TUNING until the auto scanning starts Scanning stops when the system tunes in a station TUNED and ST for FM stereo program light up in the front panel display 3 Press MEMORY A preset number appears in the front panel display 4 Press 7 to select the preset number you want D press O COMPLETE appears in the front panel display and the station is stored w 6 Repeat 2 to 5 to store other stations To change the preset number Restart from step 3 Listening to the radio Preset radio stations in the system s memory first see Presetting radio stations page 33 TVI O THEATRE De AVI O VQ VO ey TG EA TUNER eE CLEAR e0 10 ENTER POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG D DISPLAY 4 eRETURN
38. function is only for this system not for the connected TV or other components Auto Standby function AUTO STBY You can reduce power consumption The system enters standby mode automatically when you do not operate the system for about 30 minutes and the system is not outputting sound for about 30 minutes The default setting is ON 1 Select SYSTEM in the AMP menu then press G or gt 2 Select AUTO STBY then press or gt 3 Select the setting and press G ON Turns on the AUTO STBY function OFF Turns off the function Notes e When the system is turned off via the AUTO STBY function the system may not be turned on automatically when you turn on the TV next time e AUTO STBY begins to flash in the front panel display about two minutes before the system enters standby mode 51 sBuljes pooueapy il Additional Information Troubleshooting If you experience any of the following difficulties while using the system use this troubleshooting guide to help remedy the problem before requesting repairs Should any problem persist consult your nearest Sony dealer POWER The power is not turned on e Check that the AC power cord mains lead is connected securely The system is not turned on when the TV is turned on e Check the TV speaker settings The TV speaker settings control how the system is automatically turned on with the TV To enjoy the TV sound
39. he bass and treble level BASS TREBLE You can adjust the bass and treble level easily 1 Select TONE in the AMP menu then press or gt 2 Select BASS or TREBLE then press or gt e BASS Adjusts the bass level e TREBLE Adjusts the treble level 3 Select the parameter you want and press The parameter is from 6 to 6 in 1 step increments The default setting is 0 Adjusting the delay between the sound and the image A V SYNC You can delay the sound using this function when the image is slower than the sound 1 Select AUDIO in the AMP menu then press or gt 2 Select A V SYNC then press or gt 3 Select the setting and press e OFF No adjustment e ON Adjusts the difference between picture and sound e You may not be able to adjust the delay between sound and image perfectly using this function e This function is useful only for Dolby Digital DTS and Linear PCM 2ch input via digital coaxial cord digital optical cord or HDMI cable continued ages sbuijes pooueapy Enjoying multiplex broadcast sound DUAL MONO You can enjoy multiplex broadcast sound when the system receives an AC 3 multiplex broadcast signal e To receive an AC 3 signal you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable and set the digital output mode of the digital satellite tuner to AC 3 1 Sele
40. ide Function Displays the menu Selects a menu item and enters the selection Displays the guide menu e The above explanations are intended to serve as an example only Depending on the component the above operations may not be possible or may operate differently than described To control the connected component through DMPORT connection Remote Button Function 5 DISPLAY Press to select the setting of the front panel display 8 MENU Displays the menu 8 MENU HOME Displays the menu continued 4508 Remote Button Function 9 lt lt gt gt Press to fast reverse or to fast forward the disc when pressed during playback 10 ea gt PI Press to skip chapters 11 playback Hll pause Ml stop Play mode buttons 17 4 gt RETURN Returns to the previous screen of any displayed menu ia e t 4 gt C Selects a menu item and enters the selection Changing the input button assignments of the remote You can change the factory settings of the input buttons to suit the components in your system For example if you connect a Blu ray Disc player to the DVD jack on the system you can set the DVD button on this remote to control the Blu ray Disc player You cannot change the remote assignments for TV DMPORT and TUNER 4608 A 2 8 AV 1 Vv Input Number but
41. itch between TUNER FM and TUNER AM 4 For video components change the TV s input to the HDMI input you chose in step 3 For details refer to the operating instructions of your TV 5 Adjust the volume by pressing 1 e The sound may be output from the TV s speaker In this case turn the volume of the TV s speaker down to minimum e Even if you playback Dolby True HD Dolby Digital Plus or DTS HD with a connected component compatible with these sound formats the system accepts the signal as Dolby Digital or DTS When you playback these high quality sound formats set the connected component to output the sound in multi channel PCM if possible Notes e When you connect the video output jack of the DIGITAL MEDIA PORT adapter to the video input jack of the TV set CTRL HDMI to OFF in the AMP menu of the system page 39 The images of a component connected to the DIGITAL MEDIA PORT adapter will not be played on the TV if CTRL HDMI is set to ON e To enjoy the sound of a component without displaying the images when CTRL HDMI is set to ON turn off the TV first and then reset the power of the system If you turn on the system first and then turn off the TV all components connected to the TV will be turned off because of the Control for HDMI function If you are using BRAVIA Sync One Touch Play You do not need to perform steps 2 to 4 above When you turn on the connect
42. m x 66 mm x 72 mm w h d Mass approx 2 4 kg Speaker cords 3m Subwoofer SA WCT350 Subwoofer Bass reflex 130 mm cone type Speaker system Speaker unit Rated impedance 4 ohms Dimensions approx 196 mm x 450 mm x 410 z mm w h d gt Mass approx 10 5 kg 2 WS CT350EB 9 2 Extension bracket 5 Dimensions approx 180 mm x 147 mm x 26 S mm w h d 3 Mass approx 555 g A 5 Rear cover A Dimensions approx 80 mm x 85 mm x 14 mm w h d Mass approx 25 g Rear cover B 80 mm x 82 mm x 47 mm w h d 35 g Dimensions approx Mass approx Rear cover C Dimensions approx 80 mm x 82 mm x 47 mm w h d Mass approx 35 g Cover for the TV Dimensions approx 273 mm x 245 mm x 31 mm w h d Mass approx 165 g continued 55 GB General Power requirements 220 V 240 V AC 50 60 Hz Power consumption On 80 W Standby mode 0 3 W or less Control for HDMI is off Power output DIGITAL MEDIA PORT DC OUT 5 V 700 mA Design and specifications are subject to change without notice e Standby power consumption 0 3 W or less e Halogenated flame retardants are not used in the certain printed wiring boards e Over 85 power efficiency of amplifier block is achieved with the full digital amplifier S Master 5648 Index A A V SYNC 49 AMP menu 48 ARC 23 42 AUDIO DRC 49 AUTO STBY 51 BASS 49 BRAVIA Sync 38 C CNT LEVEL 49 Connecting AM lo
43. n Connector Video inputs outputs Video inputs outputs 3D Audio inputs Tuner section System FM tuner section Tuning range Antenna aerial Antenna aerial terminals Intermediate frequency AM tuner section Tuning range Antenna aerial Intermediate frequency HDMI connector BD DVD SAT CATV 640 x 480p 60 Hz 720 x 480p 59 94 60 Hz 1280 x 720p 59 94 60 Hz 1920 x 1080i1 59 94 60 Hz 1920 x 1080p 59 94 60 Hz 720 x 576p 50 Hz 1280 x 720p 50 Hz 1920 x 1080i 50 Hz 1920 x 1080p 50 Hz 1920 x 1080p 24 Hz BD DVD SAT CATV 1280 x 720p 59 94 60 Hz Frame packing 1920 x 1080i1 59 94 60 Hz Frame packing 1920 x 1080i1 59 94 60 Hz Side by Side Half 1920 x 1080p 59 94 60 Hz Side by Side Half 1280 x 720p 50 Hz Frame packing 1920 x 1080i 50 Hz Frame packing 1920 x 1080i 50 Hz Side by Side Half 1920 x 1080p 50 Hz Side by Side Half 1920 x 1080p 24 Hz Frame packing BD DVD SAT CATV Linear PCM 7 1ch Dolby Digital DTS PLL quartz locked digital synthesizer 87 5 108 0 MHz 50 kHz step FM wire antenna aerial 75 ohms unbalanced 10 7 MHz 531 kHz 1 602 kHz with the interval set at 9 kHz AM loop antenna aerial 450 kHz Speaker SS CT350 Front speaker unit Speaker system Full range Speaker unit 40 mm x 70 mm cone type x2 Rated impedance 4 ohms Center speaker unit Speaker unit 40 mm cone type x 2 Rated impedance 4 ohms Dimensions approx 996 m
44. nd is output from specific speakers e Check that the connectors of the speaker cord are fully inserted into the jacks e Depending on the sound source that is input to the system or selected sound field of the system page 37 no sound is output from the center speaker Sound is interrupted or there is noise e Check Formats supported by this system page 54 IMAGE No image appears on the TV e Check that the TV and the system are connected correctly e Check that the TV is selected correctly Set the TV to the appropriate input mode e Check whether HDMI IN and HDMI OUT are connected in reverse e Check that the cords are fully inserted into the jacks on both the component and this system pages 22 24 No 3D image appears on the TV e Depending on the TV or the video component 3D images may not be displayed Check the 3D image formats supported by the system page 55 When the system is in standby mode there is no image or sound on the TV e CTRL HDMI is set to OFF e When the system is in standby mode image and sound are output from the HDMI component selected the last time you turned off the system If you want to play a component other than the HDMI component you selected last time play the component via One Touch Play or turn on the system to select the HDMI component you want to enjoy Make sure PASS THRU is set to ON in the AMP menu if you connect components n
45. o e Clamp screw 2 FM wire antenna aerial 1 e Warranty 1 e Operating Instructions 1 e Digital optical cord for a TV 2 5 m 1 e Rear cover C 1 VY e Cover for the TV 1 T continued Bae Inserting batteries into the remote Insert two R6 size AA batteries supplied by matching the and ends on the batteries to the markings inside the compartment To use the remote point it at the remote sensor in the front panel display of the subwoofer e Do not leave the remote in an extremely hot or humid place e Do not use a new battery with an old one e Do not drop any foreign object into the remote casing particularly when replacing the batteries e Do not expose the remote sensor to direct sunlight or lighting apparatus Doing so may cause a malfunction e If you do not intend to use the remote for an extended period of time remove the batteries to avoid possible damage from battery leakage and corrosion 68 Positioning the system The illustrations below are examples of how to install the subwoofer and speaker You can install the speaker with the following TV models not supplied KDL 40 46LX90H KDL 40 46NX800 KDL 40 46HX800 KDL 40 46EX700 KDL 40 46NX700 Tn the actual model names the O indicates numbers and or characters specific to each model For details see Installing the speaker on Install the speaker on a rack the
46. o select the desired character To delete the character press 9 repeatedly until the character to be deleted flashes then press CLEAR while pressing and holding SHIFT 7 Press COMPLETE appears in the front panel display and the station name is stored TUNED ST 8 Press MENU Tip e You can check the frequency in the front panel display by pressing DISPLAY repeatedly Viewing the station name or frequency in the front panel display When the system is set to TUNER FM or TUNER AM you can check the frequency using the front panel display TVI O l THEATRE DO AVI O O CoCo SYSTEM STANDBY 1 22 23 4 cD 8 9 5 eS CLEAR e0 10 ENTER POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG D Q DISPLAY DISPLAY suonouny Jouny i Press DISPLAY Each time you press DISPLAY the station name and the frequency alternate in the front panel display e The station name is displayed if you have entered a name for a preset station e The frequency in the front panel display switches to the station name after several seconds Using the Radio Data System RDS What is the Radio Data System The Radio Data System RDS is a broadcasting service that allows radio stations to send additional information along with the regular program signal This tuner offers convenient RDS features such as station name display Not all FM stations provide RDS ser
47. odify the products e Do not place anything hot directly on the products The heat may cause discoloration or deformation of the products Be sure to secure the system s speaker and TV e Secure the SS CT350 speaker and TV firmly when installing them together Then secure the SS CT350 speaker installed TV firmly on the stand or wall If the SS CT350 speaker and TV are not installed securely they may fall or topple over and cause injury Do not apply weight to the products or subject them to any kind of impact e When installing the SS CT350 speaker to a TV stand or hanging the SS CT350 speaker installed TV on a wall do not apply weight to the speaker or TV with your hand Do not hit the speaker or TV with hard objects such as a screwdriver etc When moving the SS CT350 speaker installed TV If you move the products forcefully damage or injury may result Be sure to follow the proper procedures and advice given below e Be sure that two or more persons carry the SS CT350 speaker installed TV and only after unplugging and removing the connected equipment e Be careful not to allow your hands or feet to be pinched under the bottom of the SS CT350 speaker installed TV e When carrying the SS CT350 speaker installed TV do not hold it by the SS CT350 speaker part Doing so may cause damage or injury e Do not drag the SS CT350 speaker installed TV The base part may come off and damage the floor peye
48. of the connected component if an image is poor or the sound does not come out of a component connected via the HDMI cable e Audio signals sampling frequency bit length etc transmitted from an HDMI jack may be suppressed by the connected component e Sound may be interrupted when the sampling frequency or the number of channels of audio output signals from the playback component is switched e When the connected component is not compatible with copyright protection technology HDCP the image and or the sound from the HDMI TV OUT jack may be distorted or may not be output In this case check the specification of the connected component e We do not recommend using an HDMI DVI conversion cable e When TV DMPORT SA CD CD VIDEO TUNER FM or TUNER AM is selected for the input source of the system video signals via the HDMI input jack BD DVD SAT CATV that was selected last time are output from the HDMI TV OUT jack e This system supports Deep Colour x v Colour and 3D transmission e To enjoy 3D images connect 3D compatible TV and video components Blu ray Disc player Blu ray Disc recorder PlayStation 3 etc to the system using High Speed HDMI cables put on 3D glasses and then play back 3D compatible content 2308 peyeys Buma A Connecting other components When connecting components that do not have HDMI jacks such as a PlayStation 2 a DVD player a satellite tuner
49. omponents turn off automatically Also when you turn the TV off by using the system s remote the system and the connected components turn off automatically TVI O I THEATRE DO AVIO VQ mm m SYSTEM STANDBY 1 22 23 SAT 24 Si cD AVVO O ENTER 20 10 oS CLEAR POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG O E DISPLAY cCc3J3CI3ICICI ea AMP MENU REX HOME Geriohs MENU TUNING TUNING PRESET PRESET Oe PRO lt 1 SOUND FIELD e gt G e _ e SHIFT O TV yellow While pressing and holding TV yellow press AV 1 0 The TV the system and the connected components are turned off e Depending on the status the connected components may not be turned off For details refer to the operating instructions of the connected components Using the power saving function HDMI PASS THRU When using BRAVIA Sync you can enjoy image and sound from a Blu ray Disc etc on the TV even if the system is in standby mode Power consumption in standby mode is also reduced automatically when the TV is turned off if PASS THRU is set to AUTO The default setting is AUTO Note e This function is available only when CTRL HDMI is set to ON POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG _ O 3 DisPLAY Press AMP MENU 2 Press t repea
50. op antenna aerial 25 Blu ray Disc player 22 cable television tuner 22 24 DIGITAL MEDIA PORT adapter 24 DVD player 22 24 FM wire antenna aerial 26 PlayStation 2 24 PlayStation 3 23 satellite tuner 22 24 TV 22 D Digital optical cord 22 DIMMER 50 DISPLAY 35 51 DUAL MONO 50 F Front panel display 28 INPUT MODE 50 INPUT SELECTOR 27 Installing 7 M Muting 29 N NIGHT MODE 50 P Positioning the system 7 Preventing the TV from falling 18 PROTECTOR 54 R Radio 33 Radio stations 33 Remote before use 6 operating 29 43 S Sleep timer 51 Sound field 37 SW LEVEL 49 T TREBLE 49 V VOLUME 27 29 Volume Limit function 40 5768 uonewoyu jeuonippY i 41 8 148621 1 Sony Corporation Printed in Malaysia http www sony net
51. ot compatible with BRAVIA Sync to the system page 41 The remote does not function Point the remote at the remote sensor J on the system e Remove any obstacles in the path between the remote and the system e Replace both batteries in the remote with new ones if they are weak e Make sure you select the correct input on the remote OTHER Control for HDMI does not work properly e Check the HDMI connection page 22 e Set up Control for HDMI on the TV page 38 e Make sure the connected component is compatible with BRAVIA Sync e Check the Control for HDMI settings on the connected component Refer to the operating instructions supplied of the connected component e If you change the HDMI connection connect disconnect the AC power cord mains lead or if there is a power failure repeat the procedures of BRAVIA Sync Features page 38 e When you plug in or unplug the AC power cord mains lead wait 15 seconds or more before operating the system continued 53 GB uopewuoyu jeuonippy a e If you connect the audio output of the video component and the system using other than an HDMI cable no sound may be output because of BRAVIA Sync In this case set CTRL HDMI to OFF page 39 or connect the audio output jack directly to the TV instead of the system If PROTECTOR and PUSH POWER appear alternately in the front panel display Press 1 to
52. ote e The amber light turns off 30 seconds after you turn off the TV However if you set PASS THRU to ON in the AMP menu the indicator stays amber even if you turn off the TV Audio format indicators Light up according to the audio format that is being input to the system MD Dolby Digital OI PLII Dolby Pro Logic II LPCM Linear PCM DTS NIGHT page 50 Lights up in NIGHT MODE 2808 aja SLEEP page 51 Flashes when the sleep timer is active HDMI page 22 Lights up when HDMI components are being used or when an ARC signal is being input to the system while TV is selected as the input source COAX OPT Light up according to the cable which you are using TUNED page 33 Lights up when tuned to a station ST page 33 Lights up when a stereo program is received MUTING Lights up when the sound is turned off Remote sensor Message display area Displays volume selected input source audio input signal etc Remote control This section describes subwoofer and speaker button operation See page 43 for details on the button operation of connected components e Point the remote towards the remote sensor ff of the subwoofer TVI O THEATRE D AVI O VO oweorr une C ETER 20710 O ENTER POP UP TOP MENU MENU MEMORY D TUNING vane ANALOG Q Po DISPLAY anamma era X muting A e e
53. rough the holes of the clamp screws and the fastener Firmly tie both ends of the string or chain together continued 1988 peyeys buije5 i Installing the speaker on a wall You can install the speaker on the wall e Use screws that are suitable for the wall material and strength As a plaster board wall is especially fragile attach the screws securely to a wall beam Install the speaker on a vertical and flat reinforced area of the wall e Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation e Sony is not responsible for accidents or damage caused by improper installation insufficient wall strength improper screw installation or natural calamity etc 1 Prepare screws not supplied that are suitable for the holes on the back of the speaker See the illustrations below fm Ammi more than 25 mm 5 mm h 10mm Hole on the back of the speaker 2 Fasten the screws to the wall The screws should protrude 6 to 7 mm S 6 to 7 mm 3 Hang the speaker onto the screws Align the holes on the back of the speaker to the screws then hang the speaker onto the two screws 2088 Connecting the speaker The connectors of the speaker cord are color coded depending on the type of speaker Connect the connectors of the speaker cord to match the color of the SPEAKERS jacks Rearofthe gt subwoofer
54. shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please 268 contact your local Civic Office your household waste disposal service or the shop where you purchased the product Disposal of waste batteries applicable in the European Union and other European countries with separate collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a p
55. splay 0 0 0 0 35 Using the Radio Data System RDS 35 Surround Function Enjoying the surround effect 00 0 37 BRAVIA Sync Features What is BRAVIA Sync eee 38 Preparing for BRAVIA Sync 38 Enjoying Blu ray Disc DVD 39 One Touch Play Enjoying the TV sound from the SYSTEMI cs a EESSI F 40 System Audio Control Turning off the system TV and the connected Components 41 System Power Off Ace Using the power saving function 41 HDMI PASS THRU Setting the Audio Return Channel function Advanced Settings Controlling connected Sony components with the remote 0 cece 43 Changing the input button assignments of the TEMOLE ro e a 46 Settings and adjustments using the amplifier MENU eee 48 Additional Information Troubleshooting ceeeseeeeeseeeeeees 52 Specifications sranani as 54 MIER r E E avevienes 57 az Getting Started p f Unpacking a wn S e Subwoofer SA WCT350 1 Remote commander RM e Screws for the extension bracket Pi AAU074 1 large PSW5 x 16 mm 6 2 Screws for the rear cover small M3 x 8 mm 1 gt e Support belt 1 e Speaker SS CT350 1 e R6 size AA batteries 2 e AM loop antenna aerial 1 OO lt P gt e Screw for the support belt SS e WS CT350EB PSW4 x 20 mm 1 Extension bracket 1 ce e Wood screw for the support belt M3 8 x 20 mm 1 o
56. tedly until SET HDMI appears then press or gt Press T 4 to select PASS THRU then press or gt continued 41 s n e 4 UAS WIAWHG i 4 Press t to select the setting e AUTO When the TV is turned on while the system is in standby mode the system outputs HDMI signals from the system s HDMI output jack We recommend this setting if you use a TV that is compatible with BRAVIA Sync This setting saves power in standby mode compared with the ON setting e ON When the system is in standby mode the system continuously outputs HDMI signals from the system s HDMI output jack Note e When AUTO is selected it may take a little more time for the picture and sound to be output to the TV than when ON is selected 5 Press AMP MENU The AMP menu turns off Setting the Audio Return Channel function to off If the TV is compatible with the Audio Return Channel ARC function an HDMI cable connection also sends a digital audio signal from the TV You do not need to make a separate audio connection for listening to TV sound If you do not use the ARC function connect the system and TV via digital optical cord and set ARC to OFF in the AMP menu POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG 3 _ DISPLAY aD o cJ CJ CJI Press AMP MENU 2 Press t repeatedly until SET HDMI appears then press or gt 42ce 3
57. the SAT CATV OPT IN jack Changing the brightness of the front panel display DIMMER The brightness of the front panel display can be set to one of 2 levels 1 Select SYSTEM in the AMP menu then press or gt 2 select DIMMER then press gt or gt 3 Select the setting and press e ON Dim e OFF Bright Changing the display setting DISPLAY You can change the display behavior of the front panel display 1 Select SYSTEM in the AMP menu then press or gt 2 Select DISPLAY then press or gt 3 Select the setting and press G e ON The display stays turned on e OFF The display appears for a few seconds when you operate the system Tip e The display shows the kinds of input signal digital input only when you press DISPLAY even if you set DISPLAY to OFF e The display stays turned on when the muting or protection function is working even if you set DISPLAY to OFF Using the sleep timer SLEEP You can set the system to turn off at a preset time when you want to fall asleep listening to music You can preset the time in 10 minute increments 1 Select SYSTEM in the AMP menu then press or gt 2 Select SLEEP then press or gt 3 Select the preset time you want and press The minutes display remaining time changes as follows OFF gt 10M gt 20M t t 90M gt 80M 30M e This
58. tons buttons a ENTER 20 10 POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG e 2 DISPLAY D o Ce C AMP MENU RETURN TOOLS EXIT sHOME OPTIONS TUNING TUNING PRESET PRESET PROG sound FIELD Press and hold the input button whose assignment you want to change and then press and hold AV I at the same time Example While holding down DVD press and hold AV 1 While continuing to hold down AV 1 0 release the input button you selected in step 1 Example While continuing to hold down AV 1 0 release DVD While continuing to hold down AV 1 0 refer to the following table and press the corresponding number button for the category you want Example While continuing to hold down AV I O press 1 4 Release the number button you selected in step 3 and then release AV Vo Example Release 1 then release AV 1 0 Now you can use the DVD button to control the Blu ray Disc player Categories and the corresponding buttons for BD DVD SAT CATV VIDEO and SA CD CD Categories Press Blu ray Disc player 1 command mode BD1 Blu ray Disc recorder 2 command mode BD3 DVD player 3 command mode DVD1 DVD recorder 4 command mode DVD3 VCR command mode VTR3 5 CD player 6 DSS 7 a The initial setting of the BD button For details on the BD1 or BD3 setting refer to the operating instructions supplied with the Blu ray Disc player or
59. ural and does not include multi channel sound If 5 1CH etc is displayed the signal contains multiple channels but the surround effect may be subtle depending on the program or disc No TV sound is output from the system e Check the connection of the digital optical cord or audio cord that is connected to the system and the TV page 22 e Check the sound output of the TV If the TV is compatible with the ARC function set CTRL HDMI and ARC to ON The sound is output from both the system and the TV e If the Control for HDMI function is set to off or the selected component is not compatible with the Control for HDMI function turn off the sound of the system or the TV Sound lags behind the TV image e Set A V SYNC to OFF if A V SYNC is set to ON The volume turns down when the output method changes from the TV speaker to the system speakers The Volume Limit function is working For details see Using the Volume Limit function page 40 No sound or only a very low level sound of the connected component is heard from the system e Press 4 and check the volume level e Press X or 41 to cancel the muting function e Check that the input source is correctly selected e Check that all the cables and cords of the system and the connected components are fully inserted e Check the HDMI setting of the connected components No sou
60. usly by setting the Control for HDMI function of the TV TVI 1 THEATRE AVI O VQ Vo fer f CO e CLEAR 20 10 ENTER POP UP TOP MENU MENU MEMORY D TUNING DIGITAL ANALOG P DISPLAY OD CIUC IC IC ma AMP MENU k Make sure that the system is connected to the TV and the connected components via HDMI cables not supplied Turn on the system the TV and the connected components 3 Select the input of the system and the HDMI input of the TV SAT CATV DVD BD so that an image from a connected component is displayed 4 Display the list of the HDMI components on the TV menu and set the Control for HDMI function to on for the connected components The Control for HDMI function for the system and the connected components are simultaneously set to on After you finish the setting COMPLETE appears in the front panel display e For details on setting the TV and the connected components refer to their operating instructions If COMPLETE does not appear after performing the steps above Set the Control for HDMI function to on for both the system and the connected component individually Press AMP MENU Press t repeatedly until SET HDMI appears then press or gt Press t repeatedly until CTRL HDMI appears then press or gt Press t to select ON Press AMP MENU The AMP menu turns off The Control for HDMI function is set to on
61. vice nor do they provide the same type of services If you are not familiar with the RDS check with your local radio stations for details on RDS services in your area continued 35 GB Receiving RDS broadcasts Simply select a station When you tune in a station that provides RDS services the frequency in the front panel display switches to the station name Ifan RDS broadcast is not received a station name will not appear in the front panel display unless you set the station name manually e RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak e When a station name is displayed you can check the frequency by pressing DISPLAY repeatedly 3648 Surround Function Enjoying the surround effect Selecting the sound field This system can create multi channel surround sound You can select one of system s optimized pre programmed sound fields AMP MENU RETURN TOOLS EXIT sHOME OPTIONS TUNING TUNING JC ee PRESET PRESET PROG lt 1 sound FIELD SOUND FIELD Press SOUND FIELD The present sound field appears in the front panel display TPoM HOM Each time you press SOUND FIELD the display changes cyclically as follows STANDARD gt MOVIE gt DRAMA gt NEWS lt gt SPORTS GAME MUSIC 2CH STEREO gt P AUDIO lt gt STANDARD
62. with excessive force during cleaning or maintenance e If you hang the SS CT350 speaker or SS CT350 speaker installed TV on a fragile wall or a wall whose surface is not flat or perpendicular the product s may fall and cause injury or property damage e If the SS CT350 speaker or SS CT350 speaker installed TV is not installed firmly on the wall the product s may fall and cause injury or property damage peyeys Buma i Do not place any object on the products e Do not put anything on the products If you do so the system may fall and cause injury or property damage l i continued ges Do not lean or hang on the products e Do not lean or hang on the products as they may fall on you and cause serious injury Pay attention to the location e Do not install the products on wall surfaces such as a pillar where the corners or the sides of the products protrude away from the wall surface If a person or object happens to hit the protruded corner or side of the products it may cause injury or property damage e Do not expose the products to rain or moisture or spill liquid of any kind on them It may cause a fire or electric shock e Never place the products in hot humid or excessively dusty places or in a place where they are subject to mechanical vibrations Doing so may cause a fire or electric shock e Keep flammable objects or open flames e g candles away from the products e Do not
63. ys Buma i Notes on installation e When assembling spread a cloth on the floor to avoid damaging the floor e Install the products on a solid and flat floor e Be sure that two or more persons install the products Doing it alone may result in an accident or injury e Be sure to keep children away during the process Be sure to install the products securely following the instructions e Tighten the screws securely If the SS CT350 speaker is not installed securely it may fall and cause damage or injury e Be careful not to pinch your fingers or hands when assembling the products Notes on installation on a wall e If you use the products installed on a wall for a long time the wall behind or above the products may become discolored or the wallpaper may come unstuck depending on the material of the wall e If the products are removed after installed on the wall the screw holes will remain e Consult your licensed contractor regarding an appropriate location free from radio noise etc before installing continued 11 Installing the speaker on the TV stand You can install the speaker with the following TV models not supplied KDL 40 46LX9001 KDL 40 46NX80U KDL 40 46HX800 KDL 40 46EX700 KDL 40 46NX700 In the actual model names the L indicates numbers and or characters specific to each model Although the shape of the TV stand base differs depending on the TV model you can install the sp

HT-CT350 - Sony Europe

Contents

Download Pdf Manuals

Related Search

Related Contents