Home

Sony Notebook User Guide

Contents

1. See SEES A Vee S27 A SSF 2 Press the power button 2 of the computer until the green power indicator 3 light turns on 3 If necessary press lt Fn gt lt F5 gt to adjust the brightness controls for the LCD display To increase the brightness use the up or right arrow keys To decrease use the down or left arrow keys n lt Fn gt lt F5 gt is only possible if Windows is running If you press the power button for more than four seconds the computer will turn off Using your notebook 28 Shutting down your notebook It is important that you shut down your computer properly so you do not lose unsaved data To shut down your computer proceed as follows 1 2 gt Click the Start button Click Turn Off Computer The Turn off computer screen appears Click Turn Off Wait for your computer to turn off automatically The power indicator turns off Turn off any peripherals connected to your computer Respond to any prompts warning you to save documents or to consider other users If you are unable to shut down your computer Close all software in use If applicable remove the PC Card To do so double click the Safely Remove Hardware icon in the taskbar Select the hardware you want to unplug and click Stop Disconnect any USB devices Press lt Alt gt lt F4 gt and select Turn Off trom the screen that appears If this does not work you can press the power button for more than
2. 2 Check that the phone number the program is dialling is correct 2 In the Phone and Modem Options dialog box Control Panel Phone and Modem Options check that your modem is listed on the Modems tab and that the location information is correct on the Dialing Rules tab 4 Each time you use your modem while travelling make sure that the country of the active location defined in the Phone and Modem Options dialog box matches the country you are dialling from My modem cannot establish a connection The modem dialling mode may be incompatible with your telephone line My modem connection is slow Many factors influence modem connection speed including telephone line noise or compatibility with telephone equipment such as fax machines or other modems If you think your modem is not connecting properly to other PC based modems fax machines or your Internet Service Provider check the following 2 Have your phone company check that your phone line is free from any line noise 2 If your problem is fax related check that there are no problems with the fax machine you are calling and that it is compatible with fax modems 2 Ifyou are having a problem connecting with your Internet Service Provider check that the ISP is not experiencing technical problems 2 If you have a second phone line available try connecting the modem to that line Getting help 96 About peripherals I cannot use DV devices The message DV equipme
3. The standard is regarded in the audio video and IT industries as the most suitable interface for connecting computers and digital audio video devices such as digital cameras etc An ISP Internet Service Provider is a company which provides you with a user name password and telephone number in order to connect to the Internet Glossary Term L2 cache memory LAN LCD LED Lithium ion battery MAPI Maximum RAM Motherboard 112 Definition Cache memory is RAM like memory that enables quick access to data that has already been read by the computer L1 and L2 are levels of cache memory in a computer A LAN Local Area Network is a group of computers connected together within a limited geographical area It enables users to share devices such as printers and information using one processor or server Short for Liquid Crystal Display Flat notebook display technology using liquid crystals and light polarisation to provide sharp flicker free images on a screen comprised of millions of tiny cells Colour can be produced by two basic techniques Passive matrix is the less expensive of the two technologies The active matrix technology or TFT produces better quality but is also more expensive Short for Light Emitting Diode A semiconductor device that lights up when electricity passes through it A lithium ion battery uses lithium cobalt oxide and carbon as electrodes and ions move from one electrode to the othe
4. A recovery process that enables you to recover any of the applications initially available on the computer Performing an application recovery is useful when an individual application does not run properly or to reinstall a driver when a device does not work properly CD ROM that enables a VAIO computer user to recover all the applications that were available when the computer was purchased The CD ROM is supplied with the computer An acronym for Basic Input Output System The BIOS is a program that enables the computer to start when you turn it on It monitors the data stream between the operating system and the computer s hardware devices CardBus is the commercial name for an advanced PC Card The CardBus technology allows computer users to enjoy higher performances as far as data transfer and operating speed are concerned See PCMCIA Abbreviation for Compact Disc Read Only Memory A high capacity optical disc usually 650 MB in size capable of being read from but not written to Glossary Term CD RW CPU DC In Docking station Driver DVD ROM Ethernet EULA LINK ISP 117 Definition Short for Compact Disc ReWriteable Compact Disc that can be used to write or rewrite data to it A CD RW can be written to several times a CD R can only be written to once The CPU Central Processing Unit is the brains of the computer it processes the instructions of your system s programs The CPU is also known as
5. Alternatively 1 Click Start and then Turn Off Computer 2 Inthe Turn off computer screen press Standby The computer enters Standby mode Using your notebook 53 To return to Normal mode proceed as follows Press any key If you press the power button for more than four seconds the computer will switch off automatically When the computer is in Standby mode you cannot insert a disc Standby requires less time than Hibernate Standby uses more power than Hibernate If you do not work with your computer on AC power for 30 minutes it will enter System Standby mode As aresult if you are using the CD RW DVD ROM drive the operation will be interrupted To avoid this change the settings in the Control Panel Using Hibernate mode The state of the system is saved on the hard disk and power is turned off The power indicator light is off in this mode To activate Hibernate mode proceed as follows Press lt Fn gt lt F12 gt The Hibernating screen appears and the notebooks enters Hibernate mode Alternatively Click Start and then Turn Off Computer In the Turn off computer screen hold down the lt Shift gt key and press Hibernate To return to Normal mode proceed as follows Turn on the computer by pressing the power button The computer returns to its previous state 0 See o a 5 e fe Ke co a fe a gt e Vi 1g your notebook If you press the power butto
6. Connecting to a network LAN You can connect your computer to 10BASE T 100BASE TX type networks via an Ethernet network cable For the detailed settings and devices needed to connect to the network consult your Network Administrator YI 990990900 Q00000 E game E The default settings make your computer able to connect to the network If the main unit is docked you can only use the Ethernet network connector on the port replicator For more information about connecting your notebook to the network please consult the Hardware troubleshooting section of the VAIO Link website How to troubleshoot network problems Do not plug a phone cable into your computer network jack Getting help 82 Getting help This section describes how to get help and support from Sony and provides troubleshooting tips for your computer Sony support options Sony provides several support options for your computer Printed documentation supplied with your notebook Q E COOU O A Getting Started brochure where you will find a brief description of the items in your box and how to setup your notebook A Troubleshooting Guide where you will find all the basic information you need to start using your notebook as well as troubleshooting and VAIO Link information An Application CD Guide Your Sony Guarantee conditions A Wireless LAN Regulations leaflet A Channel Selection leaflet A Safety Regulation
7. Normal mode from Standby mode or Hibernate mode The computer will return to its original state if you restart it The PC Card slots can accommodate at the same time two Type I two Type Il or one Type Ill PC Card These slots are compatible with Card Bus ports Use the lower slot for PC Type Ill cards Some PC Cards may require you to disable idle devices when using the PC Card You can use Sony Notebook Setup to disable devices Make sure you use the most recent software driver provided by the PC Card manufacturer If an mark appears on the Device Manager tab in the System Properties dialog box remove the software driver and then reinstall it You do not need to shut down the computer before inserting or removing a PC Card Do not force a PC Card into the slot It may damage the connector pins If you have difficulty inserting a PC Card check that you are inserting the PC Card in the correct direction See the manual supplied with your PC Card for more information on use For some PC Cards if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is inserted you may find that a device connected to your system is not recognised Reboot your system to correct the problem Do not carry your notebook while touching the head of a PC Card as pressure or shock may damage the connector pins Using your notebook 40 Removing a PC Card Follow the steps below to remove the PC Card wh
8. application Managing drivers explains how to install update or uninstall a driver Using the Product Recovery CD ROMs explains how to perform a system and application recovery Using partitioned drives tells you what you can do with partitioned drives Getting help 84 In the VAIO Link Customer Service Guide you will find all the VAIO Link information you need including specific contact numbers and addresses for each country Consult the Online Help files of the software you are using for detailed information on features and troubleshooting Refer to the Microsoft Quick Start manual for more information on Windows Go to http www club vaio sony europe com to find online tutorials about your favourite VAIO software Other sources of information Q Q E The online help files that accompany your pre installed software contain instructions on using the software VAIO Link website if you have any problem with your computer you can access the VAIO Link web site Go to http www vaio link com VAIO Link Before contacting VAIO Link try to solve the problem by reading the User Guides and help files for the peripherals or software 0 You need to plug in the phone line and configure your modem for use before using the communication features described in this manual Getting help 85 Troubleshooting This section describes how to solve common problems you might encounter when using your notebook Many problems have
9. enabled products on the market or announced for introduction world wide ranging from camcorders and portable music players to voice recorders and many other electronic devices You can currently use Memory Sticks with the following Sony products Visual 232 Cybershot digital camera 232 Mavica digital camera 2 PC TRV and VX series digital video cameras LC data projector Audio 32 MS Walkman 2 MS Hi fi system Network Walkmans 1 Voice recorders Other 2 VAIO notebooks VAIO desktops 2 CLIE Handheld Entertainment Organiser Using your notebook 47 232 Sony mobile phones 2 Digital printers 2 AIBO the Sony Entertainment Robot To find out more about the products available in your country go to http Awww sonystyle europe com Write protecting a Memory Stick Memory Sticks are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting Move the tab to the right or left to set or release write protection When the erasure prevention switch is off data can be saved on the Memory Stick When the erasure prevention switch is on data can be read from but not saved on the Memory Stick The 128 MB Memory Stick has a vertical lock Using your notebook 48 Inserting a Memory Stick There are 2 ways you can insert a Memory Stick in your notebook 2 Using the Memory Stick slot Using one of the PC Card slots To do
10. four seconds This will shut down the computer This operation may result in loss of data If you are not using the computer for a short period of time you can save power by using the Standby mode To enter Standby mode press the lt Fn gt and lt Esc gt keys simultaneously Or go to the Start menu select Turn Off Computer and then click Stand By For more details on power management see Using power saving modes page 52 Using your notebook 29 Using the keyboard Your keyboard is very similar to a desktop computer s but has additional keys that perform specific notebook related tasks 1 4 Delete Break 2 11 kol 9 8 6 5 Using your notebook Keys Escape key 1 Function keys 2 Print Screen key 3 Correction keys 4 Navigation keys 5 Application key 6 Numeric keypad area 7 Operator keys 8 11 12 Windows key 9 lt Fn gt key 10 A H Descriptions The lt Esc gt Escape key is used to cancel commands The twelve function keys along the top of the keyboard are used to perform designated tasks For example in many applications lt F1 gt is the Help key The task associated with each function key may vary from one application to the other The lt Print Screen gt key takes an electr
11. in speakers may be turned off Press lt Fn gt lt F3 gt to turn on the speakers The speaker volume may be turned to the minimum Press lt Fn gt lt F4 gt and then press 4 or gt to increase the volume If your computer is powered by battery check that the battery is inserted properly and that it is charged If you are using an application that has its own volume control check that the volume is turned up Check the volume controls in Windows If you use external speakers check that the speakers are properly connected and the volume is turned up If the speakers have a mute button make sure it is off If batteries power the speakers check that the batteries are inserted properly and that they are charged If you have connected an audio cable or a set of headphones to the headphone connector disconnect the cable The sound of my notebook s fan is too loud Use the PowerPanel utility to change the Thermal Control Strategy setting to Quiet This setting slows down the CPU speed See PowerPanel Help for more information My microphone does not work If you are using an external microphone check that the microphone is plugged into the microphone connector correctly Getting help 95 About the modem My internal modem does not work 2 Check that the phone line is plugged into your computer 2 Check that the phone line is working You can check the line by plugging in an ordinary phone and listening for a dial tone
12. indicator Num Lock indicator Caps Lock indicator Scroll Lock indicator page 55 page 55 page 33 page 33 page 33 page 33 16 Using your notebook 17 Back 1 ventilation slot page 12 2 DC In page 19 3 printer connector page 76 4 monitor VGA page 64 connector 5 AV Out connector page 67 6 Ethernet connector page 81 network 7 2 USB ports page 73 8 modem connector page 50 9 microphone connector page 71 10 headphone connector page 70 for headphone or external speakers 11 USB port page 73 1 4 5ile 7 l8 911011 D ss Y y There is a ventilation slot located on the left side of the back panel Do not cover the ventilation slot when the computer is on J J Sees Y a 5 e e Ke 0 Per e Z PA e Vi 1g your notebook Bottom multi purpose bay release lever page 20 port replicator connector cover page 61 18 Using your notebook 19 Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source Using the AC adapter To use the AC adapter proceed as follows 1 Plug the cable attached to the AC adapter 1 into the DC In connector 2 on the computer Plug one end of the power cord 3 into the AC adapter Plug the other end of the power cord into an AC outlet m 0 Use your notebook only with the supplied AC adapter To disconnect your not
13. inserted in the battery bay on the right side of the computer Turns on when the Memory Stick is in use Turns off when the Memory Stick is no longer in use On Off Data is read from or written to the hard drive The hard drive is not being accessed Turns on when the number keys in the numeric Turns off when the alphanumeric character keys in keypad are active the keypad area are active Turns on when the characters appear in uppercase as Turns off when the characters appear in lowercase you type The lt Shift gt key lowers the case of typed as you type unless you hold down the lt Shift gt key characters when Caps Lock is on Turns on when the screen scrolls differently Turns off when the information moves across the depends on the application no effect in many display normally applications Using your notebook Using the touchpad 34 The keyboard contains a cursor pointing device your touchpad 1 You can point to select drag and scroll objects on the screen using the built in touchpad Action point click double click right click drag scroll Description Slide one finger on the touchpad to place the pointer 2 on an item or object Press the left button 3 once Press the left button twice Press the right button 4 once In many applications this action displays a shortcut menu Slide one finger while pressing the left button Move your finger along the right edge
14. it uses power from the AC outlet 1g your notebook lt _ lt PS 23 Removing the battery pack To remove the battery pack proceed as follows 1 Turn off the computer 2 Open the cover of the battery bay 3 Pull out the battery pack 1 gt UO 2a Q a e fe Ke co a fe Z gt e WV 4 Close the cover of the battery bay 0 You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in Standby mode Using your notebook 24 Using the second battery pack You can purchase a second rechargeable battery pack With two battery packs you can extend the time you use your computer with battery power When using two battery packs the battery pack you insert first charges first The battery pack you insert second charges when the first battery pack is 85 percent full You can monitor which battery pack is charging by observing the battery indicator lights Inserting the second battery pack To insert a second battery pack proceed as follows 1 If the weight saver or the optical disc drive is in the multi purpose bay 1 remove it 2 Insert the battery pack 2 into the multi purpose bay The battery 2 indicator light turns on Ss SED Oe lt gt 2 SESE ESS SSS SRSA gt AS 2 CES EES N s S2 3 Attach the weight saver 3 to the computer to stabilize the batt
15. its disks and other hardware Windows 2000 Windows Millennium Edition Windows XP Professional and Windows XP Home Edition are examples of operating systems found on VAIOs A partition is a logical division of a computer s hard disk A two partition hard drive would typically contain C and D drives Partitioning is particularly useful if you run more than one operating system or to clearly separate your data files from your installed software A PBX Private Branch Exchange isa private telephone network within an enterprise Under this system the calls between the enterprise members are local and the phone numbers are made up of 3 or 4 digits Companies generally choose this phone system for internal communication because it is less expensive than the regular network The users can still share a number of outside lines for making calls external to the PBX A PCMCIA card The term PC Card is more widely used than PCMCIA See PCMCIA PCMCIA Personal Computer Memory Card International Association is the name of the group that produced the specification for the credit card sized plug in boards for laptop computers The cards used to be called PCMCIA cards but as this was rather unpronounceable these cards are now termed PC cards An example of a PC card is a credit card sized modem A pixel Picture Element is a part of your screen Your screen is made up of thousands of pixels enabling you to see colours and pictures on it The more pixe
16. may present a fire or chemical burn hazard if mistreated Do not disassemble heat above 60 C 140 F or incinerate Dispose of used batteries promptly and properly Keep away from children In some areas the disposal of lithium ion batteries in household or business waste may be prohibited Use the public collection system Disposing of internal memory backup battery Q E Your notebook is equipped with an internal memory backup battery that should not have to be replaced during the lifetime of the product For changing this battery please contact VAIO Link Danger of explosion if the battery is incorrectly replaced Dispose of properly at end of life In some areas the disposal of lithium ion and other non hazardous batteries in household or business waste may be prohibited Please use the public collection system Welcome Welcome Congratulations on purchasing a Sony VAIO notebook Sony has combined leading edge technology in audio video computing and communications to provide you with state of the art personal computing Here are just some of the features your VAIO notebook has to offer E Q E Exceptional performance Your PC includes a fast processor a fast CD RW DVD ROM drive and an internal modem Portability The rechargeable battery pack provides hours of use without AC power Sony audio and video quality A high resolution LCD screen enables you to take advantage of today s advanced mult
17. of the touchpad to scroll vertically Move your finger along the bottom to scroll horizontally The scroll function is available only with applications that support a touchpad scroll feature Using your notebook 35 Using the CD RW DVD ROM drive Your computer is equipped with a CD RW DVD ROM drive To insert a disc proceed as follows 1 Turn onthe computer 2 Press the eject button 1 to open the drive The tray slides out 3 Place a disc in the middle of the tray with the label side facing up until the disc clicks into place 4 Close the tray by pushing it gently 0 When the computer is in Standby or Hibernate mode you cannot insert or remove a disc Be sure to seat the disc firmly over the disc drive hub fingers If you do not seat the disc firmly you could damage your disc drive and you may not be able to open the tray When you finish using a disc wait until the LED indicator turns off and then press the eject button to remove the disc If the disc does not come out when you press the eject button go to Windows Explorer or My Computer Select the drive click the right button of your mouse and select Eject or press lt Fn gt lt E gt keys to open the disk tray If it still does not work turn off the computer and insert a thin pointed object e g a paper clip into the manual eject hole Using your notebook 36 Using the CD RW function Your notebook is equipped with a CD RW DVD ROM drive To burn CDs you can
18. on the computer only after turning off all peripherals Do not move your computer while the system is in Standby mode The magnetic properties of some objects can have serious consequences for your hard disk drive They can erase the data on the hard disk drive and cause the computer to malfunction Do not place your computer near or on any objects which emit magnetic fields mainly 2 TV sets Speakers E 2 Magnets 32 Magnetic bracelets Read this first Audio video Q Audio and picture distortion may occur if this equipment is positioned in close proximity to any equipment emitting electromagnetic radiation Connectivity 2 Never install modem or telephone wiring during a severe lightning storm Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations 2 Be cautious when installing or modifying telephone lines Use your notebook only with the supplied AC adapter To disconnect your notebook completely from mains voltage unplug the AC adapter 32 Please make sure that the socket outlet is easily accessible 2 Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface Optical disc drive 4 Misuse of the optical instruments supplied with your notebook can cause eye hazard As the laser beam used in this product is harmful to eyes do not attempt any disassembling process For servicing refer to qualif
19. one external device at the same time Of course you can always connect an external USB mouse or keyboard See Connecting a Universal Serial Bus USB device page 73 Before you connect or disconnect the mouse or the keyboard turn off the computer To connect an external mouse or keyboard proceed as follows 1 Plug the mouse cable 1 or the keyboard cable 2 with the 4 symbol facing up into the PS 2 mouse keyboard connector 3 identified by MOUSE KEYBOARD 0 See the manual supplied with your mouse or keyboard for more information on installation and use Connecting peripheral devices 73 Connecting a Universal Serial Bus USB device You can connect a USB device for example a mouse floppy disk drive keyboard printer to your computer Before connecting or disconnecting a USB peripheral you do not need to shut down the computer You may need to install software device drivers supplied with your USB device before using the USB device There are 3 USB ports at the back of your notebook and 2 USB ports at the back of the optional port replicator Connecting a USB mouse To connect a USB mouse proceed as follows 1 Choose the USB connector you prefer to use at the back of the notebook 1 or the optional port replicator 2 Plug the USB mouse cable 2 into the USB connector You can use your USB mouse 3 1 The VAIO USB mouse software driver
20. player it could be that the DVD ROM you are trying to play is incompatible with the DVD ROM drive on your notebook The region code is listed on the packaging of the disc If you hear sound but cannot see a picture your computer s video resolution may be set too high For best results change the resolution in the Windows Control Panel Display to a lower resolution If you see a picture but cannot hear any sound check all of the following 2 Make sure the mute setting is off on your DVD player 2 Check the master volume setting of the Volume Control If you have connected speakers externally check the volume settings of your computer speakers and check the connections between your speakers and the computer Q Inthe Device Manager check that the correct drivers are installed properly To display the Device Manager click Start and select Control Panel Double click the System icon On the Hardware tab click the Device Manager button A dirty or damaged disc may cause the computer to hang while it tries to read the disc If necessary reboot the computer remove the disc and then check that it is not dirty or damaged Check your PG Parental Guidance in the DVD software as this might be preventing you from playing certain DVDs when it is activated On your computer the default DVD region code is 2 Do not change this setting using the Region Code Change function in Windows or using any other software applications System malfu
21. the connectors or open the memory panel Please contact VAIO Link if you need assistance Adding and removing memory In the future you may want to install memory modules to expand the functionality of your notebook 256 MB of memory is preinstalled in one of the two available memory module bays 256 MB x 1 When only 256 MB of memory is preinstalled you can add an optional 256 MB memory module to increase memory up to 512 MB For memory upgrades use only DDR266 CL2 5 DDR SDRAM SO DIMMs gold lead contacts Electrostatic discharge can damage electronic components Before touching a memory expansion board ensure the following Handle the memory module gently 2 The procedures described in this document assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment 2 Disconnect the system from its power source and from any telecommunication links networks or modems before you open the system Failure to do so may result in personal injury or equipment damage Precautions 101 Electrostatic Discharge ESD can damage memory modules and other components Install the memory module only at an ESD workstation If such a station is not available do not work in a carpeted area and do not handle materials that produce or hold static electricity cellophane wrappers for example Ground yourself
22. to another in a single and instant transfer Using your notebook 42 The main advantages of the Memory Stick are its Q E Compactness with dimensions of just 21 5 mm W x 2 8 mm H x 50 mm D compatible products can also be small lightweight and attractive in their design Capacity Its data capacity far exceeds that of a floppy disk Security its lock option means you can protect your data from accidental erasure Versatility memory capacity ranges from 4 MB up to 128 MB the equivalent capacity of 88 floppy disks Reliability by way of protecting the hardware and its contents the number of terminals is reduced to only 10 pins This and the overall robust structure of the stick gives it a longer lifespan than other storage devices Durability the same Memory Stick can be used tens of thousands of times Forward compatibility the Memory Stick s current format is designed to be compatible with future products and higher capacity Memory Sticks Using your notebook 45 Generic Memory Stick The original Memory Stick blue in colour can be used to record image data taken with digital still cameras etc or data from the PC With it you can record play back and transfer various kinds of data at any given time Because it is easy to remove and transport safely you can use Memory Stick anywhere by inserting it into any compatible device to transfer and share the information you ha
23. up your data regularly Restore the original application programs from the Product Recovery CD ROM On handling floppy disks E Q Q Do not open the shutter manually or touch the surface of the floppy disk Keep floppy disks away from magnets Keep floppy disks away from direct sunlight and other sources of heat On handling CD ROMs Q E E Do not touch the surface of the disc Do not drop or bend the disc Fingerprints and dust on the surface of a disc may cause read errors Always hold the disc by its edge and its central hole as shown Precautions Q 108 Proper care of the disc is essential to its continuous reliability Do not use solvents such as benzine thinning agents commercially available cleaners or anti static spray as they may cause damage to the disc For normal cleaning hold the disc by its edge and use a soft cloth to wipe the surface from the centre out If the disc is badly soiled moisten a soft cloth with water wring it out well and use it to wipe the surface of the disc from the centre out Wipe off any remaining moisture with a dry soft cloth On using the battery pack Q Q E UOU O O O E Never leave the battery pack in temperatures above 60 C such as in a car parked in the sun or under direct sunlight Battery life is shorter in a cold environment This is due to decreased battery efficiency at low temperatures Charge the batteries at temperatures between 10 C
24. with the Windows key Combinations Functions me F1 Displays Help and Support Center Au Tab Switches the selected button on the taskbar me E Displays My Computer Au F Displays the Search Results window to find a file or folder This is equivalent to selecting Search from the Start menu Au Ctrl F Displays the Search Results Computers window where you can locate other computers Ax M Minimises all displayed windows Shift Au M Returns all minimised windows to their previous size ma R Displays the Run window This is equivalent to selecting Run from the Start menu lt Fn gt gw Insert Displays the System Properties window This is equivalent to double clicking the System icon in the Control Panel or to right clicking My Computer then clicking Properties from the Start menu Using your notebook 32 Combinations and functions with the lt Fn gt key Combinations Feature Zz lt Fn gt _ ESC Standby lt Fn gt ax F3 speaker switch lt Fn gt L F4 speaker volume lt Fn gt F5 brightness control lt Fn gt F7 switch to the external display lt Fn gt V F8 lt Fn gt F12 Hibernate Functions Puts the system into Standby mode a power management state To return the system to the active state press any key Toggles the built in speaker on and off Adjusts the built in speaker volume To increase volume press lt Fn gt lt F4 g
25. 4x for CD RW discs Huw A WN The disc tray does not eject even when the eject button is pressed 2 Check that the notebook is turned on The CD writing application software may be stopping the disk from being ejected Getting help 93 The reading speed of CD RW is very slow Generally the reading speed of a CD RW is slower than that of a CD ROM or CD R The reading speed can also vary depending on the type of format The disc tray ejects even when it has been locked into place E Q E Ensure that the disc is placed with the label side facing up The disc may be scratched Place another disc to see if that is the reason There may be condensation in the drive Remove the disc and leave the drive open for approximately one hour The optional PCGA UFD5 A USB floppy disk drive is not recognised as drive A To set the UFD5 A to A proceed as follows O 0O N nu BP WN Turn the system power on Connect the UFD5 A Select Control Panel from the Start menu Double click System Select the Hardware tab then click Device Manager Select Universal Serial Bus controllers then Y E Data USB Floppy From the Action menu click Uninstall Keep clicking OK until the Confirmation of deletion of device message appears Select Scan for hardware changes from the Action menu The UFD5 A is recognised as drive A Getting help 94 About sound My speakers are not producing sound E E U O U O The built
26. MI Secure Digital Music Initiative Compliance SonicStage software So that you further distinguish a MagicGate Memory Stick from a generic one look for E Q the logo printed on it a protruding dot located on the back Using your notebook 45 1 MagicGate is a copyright protection technology that complies with the standards set by SDMI Secure Digital Music Initiative an organization working to draw up industry standard specifications in order to protect copyrights of digital music The logo indicates the copyright protection system devised by Sony It is not meant to guarantee compatibility with other media MagicGate MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick and other MagicGate Memory Stick compatible devices The Memory Stick Walkman and MagicGate Memory Stick work together to check the data and ensure it complies with copyright protection If no problems are detected the data is exchanged in encrypted form if authentication is not passed data cannot be exchanged or played back SonicStage SonicStage uses copyright protection technology designed to manage the digital music content downloaded to the PC from CDs the Internet and or other sources Software installed on the PC records music content in encrypted form onto the hard disk As well as allowing you to enjoy music on the PC this technology protects against unauthorized distribution on the In
27. Sony Notebook User Guide PCG GRS Series NANIO Read this first Read this first Notice 2002 Sony Corporation All rights reserved This manual and the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval Sony Corporation provides no warranty with regard to this manual the software or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual the software or such other information In no event shall Sony Corporation be liable for any incidental consequential or special damages whether based on tort contract or otherwise arising out of or in connection with this manual the software or other information contained herein or the use thereof Macrovision This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorised by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation Reverse engineering or disassembly is prohibited Sony Corporation reserves the right to make any modification to this manual or the information contai
28. This means that channel selection will be required when using WLAN outdoors in France For more information on channel selection see the Wireless LAN Regulations leaflet and the Channel Selection leaflet cd See Y a 5 e e 2 cd Per e Z a e Vi Connecting peripheral devices 60 Connecting peripheral devices You can add functionality to your computer by connecting or using any of these peripherals Before you connect peripherals turn off the computer and all peripherals Connect the power cord only after connecting all cables Turn on the computer only after turning on all peripherals Connecting a port replicator page 61 Connecting an external display page 64 Connecting external speakers page 70 Connecting an external microphone page 71 Connecting an external mouse or keyboard page 72 Connecting a Universal Serial Bus USB device page 73 Connecting a printer page 76 Connecting an i LINK device page 78 Connecting to a network LAN page 81 RUUUUUUUOUOP Hot plug and play devices should be plugged when the computer is switched on USB devices are hot plug and play devices You do not need to shutdown your computer prior to connecting these devices unless the manual supplied with the device states differently Connecting peripheral devices 61 Connecting a port replicator Your notebook supports the use of an optional port replicator Attaching a port r
29. adjust the image The window I have just closed continues to appear on my LCD Press the lt Windows gt key and lt D gt key twice to refresh the screen Getting help 90 I cannot switch from LCD display to TV and vice versa If a DVD disc is inserted in the DVD ROM drive remove the disc About CD ROMs and floppy disks My CD RW DVD ROM drive tray does not open Q Q Q Make sure the computer is turned on Press the eject button on the disc drive If the disc does not come out when you press the eject button go to Windows Explorer or My Computer Select the drive click the right button of your mouse and select Eject or press the lt Fn gt lt E gt keys to open the disk tray If the eject button does not work you can open the tray by inserting a sharp pointed object into the hole to the right of the eject button I cannot play a CD ROM Q Q Q E After inserting the CD wait for a few seconds for the system to detect it before you try to access it Make sure the label of the disc is facing up If the disc requires software make sure the software is installed according to the instructions of the program Check the volume of your speakers Clean the disc with an appropriate cleaner Moisture condensation may have occurred Do not use the computer for at least 1 hour before turning it on Getting help 91 I cannot play a DVD ROM Q If a region code warning appears when you are using the DVD
30. book with the following devices Computer display monitor Multimedia computer display TV Projector RODDODD Turn off your computer and the peripherals unplug the AC adapter and the power cord before connecting the external display Connect the power cord after connecting all other cables Turn on the peripherals then turn on your computer Connected external displays are used as second screens On Windows systems only you can also use an external display to set up a virtual desktop Connecting peripheral devices 65 Connecting a computer display You can connect a computer display monitor either directly to your notebook or via the optional port replicator To connect a computer display proceed as follows 1 Plug the display cable 1 not supplied into the monitor VGA connector 2 O on the notebook 2 If necessary plug one end of the display s power cord 3 into the display and the other end into an AC outlet You cannot use the monitor connector on your notebook when the port replicator is connected to the notebook Connecting peripheral devices 66 Connecting a multimedia computer display You can connect the notebook to a multimedia computer display that includes built in speakers and a microphone To connect a multimedia computer display proceed as follows 1 Plug the display cable 1 into the monitor VGA connector 2 O on the computer 2 Plug the speaker cable 3
31. by maintaining contact with an unpainted metal portion of the chassis while performing the procedure Do not open the memory module package until you are ready to install the module The package protects the module from ESD Use the special bag delivered with the memory module or wrap the module in aluminium foil to protect it from electrostatic discharge Do not place the memory module in places subject to Heat sources such as radiators or air ducts Direct sunlight Excessive dust Mechanical vibration or shock Strong magnets or speakers that are not magnetically shielded Ambient temperature of more than 35 C or less than 5 C High humidity Introducing any liquids or any foreign substances or objects into the memory slots or other internal components of the computer will result in damage to the computer Be careful when adding memory Mistakes on installation or removal of the memory module may cause a malfunction Depending on the configuration of your notebook the available slots can vary Precautions 102 Changing or adding a memory module To change or add a memory module proceed as follows 1 Shut down your computer and disconnect all peripheral devices 2 Unplug the computer and remove the battery packs 3 Wait until the computer cools down Turn your computer upside down Open the cover on the bottom by unscrewing the screw turn counter clockwise 6 Toremove the memory mod
32. by typing in the model name in the search box above A list of matching documents will be displayed and can be downloaded Please note that the availability of declarations depends on the scope of the EU Directives and the individual product specifications Before activating the built in modem please read the Modem Regulations leaflet The optical disc drive is classified as a CLASS 1 LASER PRODUCT and complies with the Laser Product Safety Standard EN 60825 1 Repair and maintenance only by authorised Sony technicians Improper repairs and use can create safety hazards Read this first 6 Depending on the country usage of the Wireless LAN functionality may be restricted For country specific details please refer to the Wireless LAN Regulations leaflet The Wireless LAN functionality which is incorporated into this unit has passed Wi Fi certification and complies with the interoperability specifications established by WECA Wireless Ethernet Compatibility Alliance W TH The Standard for Wireless Fidelity Read this first Disposing of lithium ion batteries E Q E U OU U O Do not handle damaged or leaking lithium ion batteries Dispose of promptly and properly at end of life Danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions The battery pack used in this device
33. connector of the notebook with the connector on the port replicator 6 and push down until it clicks into place Connecting peripheral devices 63 6 Turn on the notebook 1 When you use the port replicator for the first time the installation of the network drivers starts automatically When attaching your computer to the port replicator do not attempt to insert or remove the battery pack Lifting and turning the computer with the attached port replicator may cause a temporary loss of power Use the AC adapter that comes with your notebook or the optional Sony adapter Disconnecting your computer from the port replicator To disconnect your computer from the port replicator proceed as follows 1 Stop the connected peripherals 2 Close the cover and pull the levers on each side of the port replicator to disconnect the computer from the port replicator 3 Lift the notebook away from the port replicator Connecting peripheral devices 64 4 Close the port replicator connector cover on the bottom of your computer Itis extremely important to close the port replicator connector cover after removing your computer from the port replicator If the cover is left open dust may get inside and damage the computer To disconnect your port replicator completely from the mains voltage unplug the AC adapter Connecting an external display You can connect an external display to your notebook For example you can use your note
34. creen Use a soft dry cloth to wipe the LCD screen On using power source E Q Q UOU O O O Your computer operates on 100V 240V AC 50 60 Hz Do not share the AC outlet with other power consuming equipment such as a photocopier or shredder You can purchase a power strip with a surge protector This device prevents damage to your computer caused by sudden power surges such as those that may occur during an electrical storm Do not place heavy objects on the power cord To disconnect the cord pull it out by the plug Never pull the cord itself Unplug your computer from the wall outlet if you will not be using the computer for a long time When the AC adapter is not used unplug it from the AC outlet Use only the supplied AC adapter Do not use any other AC adapter Precautions 106 On handling your notebook E Clean with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine as these may damage the finish of your computer Should any solid object or liquid fall into the computer shut down your computer and then unplug it You may want to have the computer checked by qualified personnel before operating it any further Do not drop the computer or place heavy objects on top of the computer Do not place your computer in a location subject to Heat sources such as radiators or air ducts Dir
35. e For more information on channel selection see the Wireless LAN Regulations leaflet and the Channel Selection leaflet Using your notebook 58 Communicating with an Access Point infrastructure An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point for example the Sony PCWA A200 Access Point The Access Point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN The Access Point coordinates transmission and reception from multiple wireless devices within a specific range RESIS REY To communicate with an Access Point infrastructure proceed as follows 1 Turn onthe Wireless switch on the front side of the computer Right click the network icon a in the taskbar displaying the Wireless Network Connection message Click View Available Wireless Networks The Connect to Wireless Network dialog box appears 4 Select the network you want to use Type the Network Key If you are using the Sony Access Point PCWA A200 by default the network key has the same name as the network ID but without the first digit For example ID of the network 09316a 6 digits Network key 9316a 5 digits 6 Type the Network Key again for confirmation 1g your notebook lt _ P 59 7 Click Connect After 30 seconds the connection is established In France only channels 10 and 11 are legally allowed when using WLAN outdoors
36. ebook LCD screen and the external monitor by pressing the key combination lt Fn gt lt F7 gt sends ee E of INA o oll Connecting peripheral devices 70 Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers To connect external speakers proceed as follows 1 Plug the speaker cable 1 into the headphone connector 2 2 Plug the other end of the speaker cable into the external speaker 3 Turn down the volume of the speakers before you turn them on 0 Make sure your speakers are designed for computer use Do not place floppy disks on the speakers their magnetic field may damage the data on the disks Connecting peripheral devices 71 Connecting an external microphone Your VAIO notebook does not contain an internal microphone If you need to use a sound input device for example to chat on the Internet you need to plug in an external microphone To connect an external microphone proceed as follows 1 Plug the microphone cable 1 into the microphone connector 2 identified by the symbol 1 n Make sure your microphone is designed tor computer use Connecting peripheral devices 72 Connecting an external mouse or keyboard You can connect an external mouse or keyboard to the optional port replicator using the PS 2 mouse keyboard connector There is only one PS 2 connector so you can only connect
37. ebook completely from mains voltage unplug the AC adapter Make sure that the socket outlet is easily accessible Using your notebook 20 Using the battery pack You can use one or two batteries as a source of power You can insert the second battery pack into the multi purpose bay on the left side of the computer Additional battery packs are available as a separate option The battery pack supplied with your computer is not fully charged at the time of purchase Inserting the battery pack To insert the battery pack proceed as follows 1 Open the cover of the battery bay 2 3 Close the cover of the battery bay until it clicks 0 When the computer is directly connected to AC power and has a battery pack inserted in the battery bay it uses power from the AC outlet Using your notebook 21 Charging the battery pack To charge the battery pack proceed as follows 1 2 Connect the AC adapter to the computer Insert the battery pack The computer automatically charges the battery 1 the battery indicator 2 light flashes in a double blink pattern as the battery charges When the battery is 85 full the battery indicator light turns off There are two battery indicator lights on the computer 1 indicates the status of the battery pack in the battery bay on the right side of the computer 2 indicates the status of the battery pack in the multi purpose bay on the left side of the computer battery indicator lig
38. ect sunlight Excessive dust Moisture or rain Mechanical vibration or shock Strong magnets or speakers that are not magnetically shielded Ambient temperature of more than 35 C or less than 10 C High humidity Do not place electronic equipment near your computer The electromagnetic field of your computer may cause a malfunction ME m m a a a DU Provide adequate air circulation to prevent that internal heat builds up Do not place your computer on porous surfaces such as rugs or blankets or near material such as curtains or draperies that may block its ventilation slots The computer uses high frequency radio signals and may cause interference to radio or TV reception Should this occur relocate the computer a suitable distance away from the set Use only specified peripheral equipment and interface cables otherwise problems may result Precautions 107 Do not use cut or damaged connection cables Your computer cannot be connected to a coin operated telephone and may not work with a private branch exchange PBX If the computer is brought directly from a cold location to a warm one moisture may condense inside your computer In this case allow at least one hour before turning on your computer If any problem occurs unplug your computer and contact VAIO Link Make sure to disconnect the power cord before cleaning the computer As you may lose important data once your computer is damaged you should back
39. ect to Wireless Network dialog box appears 3 Click the Advanced button The Wireless Network Connection Properties dialog box appears Select the Wireless Networks tab 5 Click the Add button The Wireless Network Properties dialog box appears 6 Enter a Network name SSID You can choose a 6 digit name 7 Select the Data encryption WEP enabled check box Select the Network Authentication Shared mode check box Using your notebook 10 11 12 13 14 15 16 57 Clear the The key is provided for me automatically check box Some information becomes visible Fill in the Network key The network key should be 5 digits You can choose whatever you want Fill in exactly the same Network key again for confirmation Click OK Your Network name SSID appears in the Preferred networks box Click Advanced The Advanced dialog box appears Select the Computer to computer ad hoc networks only check box Click Close Click OK Your computer is ready to communicate with another computer If you want to communicate between two or more computers you need to configure all these computers in exactly the same way This means that you need to enter the same Network name SSID and the same Network key on all computers as on the first computer you configure In France only channels 10 and 11 are legally allowed when using WLAN outdoors This means that channel selection will be required when using WLAN outdoors in Franc
40. ed the default settings you will enter the Task Manager where you can close any application that cannot close normally and restart your system If this does not work press lt Alt gt lt F4 gt to get to the Turn off computer screen from where you can shut down or restart your computer If this does not work press the power button and hold it for at least four seconds This turns off the power Unplug the computer from the AC adapter and remove the battery pack from your computer Getting help 88 My computer locks up If you suspect one application is locking your system you can try to stop it To do this press lt Ctri gt lt Alt gt lt Delete gt simultaneously If you have not changed the default settings you will enter the Task Manager Select the application or process that is locking your system and then click End Task 2 Ifthe above method does not work or you do not know which application is locking your system restart the computer On the Windows taskbar click the Start button click Turn Off Computer and then select Turn Off 2 If the above method does not work press the power button and hold it for at least four seconds This turns off the power o If your computer locks up while playing a CD ROM stop the CD ROM and shut down the computer by pressing lt Alt gt lt F4 gt and clicking Turn Off in the Turn off computer screen My software program locks up or crashes 2 Contact the software publisher or d
41. eplicator enables you to connect additional peripherals to your computer such as a printer or an external display 4 5 6 z 8 91110 11 O A oo oo Cee ORTA 50000000 coro 870r T OR N 0000000 Er 1 DC In port page 19 7 Monitor VGA port page 64 2 USB port page 73 8 S Video out connector page 67 3 PS 2 mouse keyboard connector page 72 9 Video out connector page 67 4 Serial port page 77 10 Line in connector page 67 5 Printer port page 76 11 USB port page 73 6 Ethernet port 10BASE T 100BASE TX page 81 The port replicator can be powered only with the AC adapter supplied with your notebook Do not remove the AC adapter from the port replicator or the AC outlet when using the port replicator this may cause data damage or hardware malfunctions When connecting video cables to S Video out and Video out simultaneously only the S Video out connector can be used Connecting peripheral devices 62 Attaching your computer to the port replicator To attach your computer to the port replicator proceed as follows 1 Disconnect all peripherals from the computer 2 Plug the cable attached to the AC adapter 1 into the DC In port 2 on the port replicator 3 3 Plug the power cord 4 into the AC adapter and an AC outlet The power indicator DC IN 5 of the port replicator turns green 4 Close the tilt stands before attaching the notebook to the port replicator 5 Align the bottom
42. ery pack 4 Slide the eject lever on the bottom of the weight saver toward the front of the computer to lock it Ifyou attach two battery packs you can remove one of them without shutting down the computer When removing one battery pack make sure that the other battery pack indicator is on If the indicator of the battery pack you are going to remove is on right click the battery icon in the system tray and click the Switch Battery option 9 J ba o a gt D4 fe fe Ke 0 Pr fe Z PA e WV 1g your notebook Charging the second battery pack To charge the second battery pack proceed as follows 1 Keep the battery pack 1 3 in the computer while it is connected to AC power The battery indicator 2 flashes while the battery is charging 2 When the battery indicator stops flashing the battery is 85 charged 25 1g your notebook lt _ P 26 Removing the second battery pack To remove the second battery pack proceed as follows 1 Slide the multi purpose bay release lever on the bottom of the computer in the direction of the arrow 0 Ses o 1 5 e e Ke co a fe Z gt c e WV 2 Remove the weight saver 3 Pull out the battery pack 4 Reinsert the weight saver Using your notebook 27 Starting your notebook To start your computer proceed as follows 1 Slide the LCD lock lever 1 in the direction of the arrow and lift the cover
43. esignated provider for technical support 2 Make sure the software is compatible with your equipment and operating system 2 Try re installing the software My touchpad interprets a single tap as a double click Open the Mouse icon in the Control Panel and change the button assignments in the Mouse Properties dialog box One of the buttons is assigned to the double click action Getting help 89 My mouse does not work Q E Q If you are using an external serial PS 2 mouse check that the mouse is plugged into the mouse connector of your optional port replicator If you are using an optional Sony USB mouse check that the appropriate driver and software are properly installed Check that the USB mouse is plugged into the USB connector About the display My LCD does not display anything UCO OU OUO O Check that the computer and display are both plugged into a power source and that they are turned on Check that the power indicator on the front panel of the computer is on Check that the battery packs are inserted properly and that they are charged Adjust the brightness of the LCD The computer may be in LCD video standby mode Press any key to activate the display The display mode may be set to external display mode Press and hold the lt Fn gt key while pressing lt F7 gt several times The screen image on my external display is not centred or sized properly Use the controls on your external display to
44. esolution is expressed in pixels Frequent computer screen resolutions are 640 x 480 pixels VGA resolution appropriate for a 14 inch screen 800 x 600 appropriate for a 15 inch screen 1 024 by 768 appropriate for a 17 inch screen and 1 280 by 1 024 LCD displays usually use a higher resolution than a CRT of the same size RGB stands for Red Green Blue A cable that requires separate transmission types for the three colours on the display Synchronous DRAM is a kind of dynamic random access memory running at a much higher clock speed than regular memory The amount of RAM that is available on your computer when you purchase it Glossary Term System recovery System recovery CD ROM TFT UPS USB VAIO WAN XGA 115 Definition A recovery process that enables you to recover the hard disk image initially available on the computer Performing a system recovery is useful in the event of a serious system crash or if you want to modify the size of your partitions CD ROM that is supplied with your computer and that enables a VAIO computer user to recover the hard disk image that was available when the computer was purchased Short for Thin Film Transistor Top of the range notebook display for excellent picture quality The TFT technology offers the sharpest resolution for flat displays each pixel is supported by one to four transistors A UPS Uninterruptible Power Supply is a device including a battery that p
45. four seconds or longer to shut down the notebook Getting help 98 About I LINK devices cannot establish an 1 LINK connection between two VAIO computers 4 Disconnect then reconnect the i LINK cable If you still have no connection after waiting for a while restart both computers If either computer has just returned from a power saving mode the connection may be affected In this case make sure you perform a full restart before connecting them About Wireless LAN cannot use the Wireless LAN function QO Check if the Wireless switch on the front side of the machine is turned on The Wireless LAN Access Point and your computer cannot communicate Check if the Wireless LAN switch on the front side of the computer is turned on 2 Check if the power of the Access Point is turned on 2 Check if the Access Point is displayed in the Available networks window To check this click Start and then Control Panel Double click the Network Connections icon Right click the Wireless Network Connection icon and select Properties Select the Wireless Networks tab Check if the Access Point is displayed in Available networks Connection availability is affected by distance and obstructions You may need to move your computer away from obstructions or neared to any Access Point you may be using UOO OUO O Getting help 99 The data transfer speed is slow 2 The maximum communication speed can vary depending on the ob
46. gonomic considerations to both stationary and portable environments Q Position of your computer Place the computer directly in front of you 1 Keep your forearms horizontal 2 with your wrists in a neutral comfortable position 3 while using the keyboard touchpad or external mouse Let your upper arms hang naturally at your sides Have breaks during sessions with your computer Excessive use of the computer may strain muscles or tendons Q Furniture and posture Sit in a chair with good back support Adjust the level of the chair so your feet are flat on the floor A footrest may make you more comfortable Sit in a relaxed upright posture and avoid slouching forward or leaning far backwards Welcome 13 Viewing angle of the computer s display Use the display s tilting feature to find the best position You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position Adjust the brightness setting of the display as well Lighting Choose a location where windows and lights do not create glare and reflection on the display Use indirect lighting to avoid bright spots on the display You can also purchase accessories for your display that help reduce glare Proper lighting adds to your comfort and work effectiveness Positioning an external display When using an external display set the display at a comfortable viewing distance Make sure the display screen is at eye level or slight
47. hannels Therefore before activating the WLAN functionality read the Wireless LAN Regulation and Channel Selection leaflets carefully WLAN uses the IEEE 802 11b standard which specifies the used technology The standard includes the encryption method Wired Equivalent Privacy WEP which is a security protocol Data encryption protects the vulnerable wireless link between clients and Access Points Besides that there are other typical LAN security mechanisms to ensure privacy such as password protection end to end encryption virtual private networks and authentication Wireless LAN devices using the IEEE 802 11a standard and the ones using the IEEE 802 11b standard cannot communicate because the frequencies are different The standard access is 11 Mbps or about 30 to 100 times faster than a standard dial up Depending on your model See the Specifications sheet Using your notebook 56 Communicating without Access Point ad hoc An ad hoc network is a network in which a local network is created only by the wireless devices themselves with no other central controller or Access Point Each device communicates directly with other devices in the network You can set up an ad hoc network easily at home To communicate without Access Point ad hoc proceed as follows 1 Turnon the Wireless LAN switch on the front side of the computer 2 Double click the network icon in the taskbar displaying Wireless Network Connection The Conn
48. ht status meaning On The computer is using battery power Single blink The battery is running out of power Double blink The battery is charging Off The computer is using AC power Using your notebook 22 0 When the battery is running out of power both the battery and power indicators blink Keep the battery pack in the computer while it is directly connected to AC power The battery pack continues to charge while you are using the computer If the battery level falls below 10 you should either attach the AC adapter to recharge the battery or shut down your computer and insert a Tully charged battery You can extend battery life by changing the power management modes in the PowerPanel utility The battery pack supplied with your computer is a lithium ion battery and can be recharged any time Charging a partially discharged battery does not affect battery life The battery indicator light is on while you use the battery pack as a power source When the battery life is nearly depleted both the battery and power indicators start flashing For some software applications and some peripheral devices your computer may not enter Hibernate mode even when battery life is low To avoid loss of data when using battery power you should save your data frequently and manually activate a power management mode such as Standby or Hibernate When the computer is directly connected to AC power and has a battery pack inserted in the battery bay
49. ied personnel only OQ There are visible and invisible radiations when the optical disc drive is open avoid direct exposure to the laser beam Read this first Regulatory information Sony hereby declares that the product is in compliance with the essential requirements and other relevant provisions of European Directive 1999 5 EC radio equipment and telecommunications terminal equipment Directive CEO This product complies with EN 55022 Class B and EN 55024 for use in following areas residential commercial and light industrial This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables not longer than 3 metres 9 8 feet Declaration of Conformity The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade This effort has resulted in several EU Directives asking that manufacturers make their products comply with essential standards Manufacturers are required to affix the CE mark on the products they sell and to draw up a Declaration of Conformity DoC Primarily the Declarations of Conformity are intended for the market surveillance authorities as proof that products satisfy the required standards Additionally Sony provides these EU DoC s on the website http www compliance sony de as a service to our customers You can search for all Declarations of Conformity available for a specific product
50. ile your computer is on If it is not removed properly your system may not work properly If you want to remove a PC Card when your computer is off skip steps 1 to 7 To remove a PC Card proceed as follows 1 Double click the Safely Remove Hardware icon in the system tray The Safely Remove Hardware dialog box appears Select the hardware you want to unplug Click Stop In the Stop a Hardware Device dialog box confirm that the device can be safely removed from the system Click OK A dialog box appears explaining that it is safe to remove the device Click OK Click Close Push the PC Card release button so that the release button pops out Push the PC Card release button a second time so that the PC Card pops out Gently take hold of the Card and pull it out of the slot If you unplug the PC Card from the computer when itis still turned on your system might crash and you might lose data that you did not save before Before you remove the PC Card click the PC Card icon in the taskbar and close the card Close any applications that use the PC Card before removing the card Otherwise data may be lost While the card is inserted your computer may not enter the Hibernate power management mode It may enter Standby mode It is recommended that you remove the card before your computer enters Hibernate mode by pressing the lt Fn gt lt F12 gt keys or by using the PowerPanel Utility and when it is set to enter Hibernate automa
51. imedia applications games and entertainment software Multimedia features Enjoy audio and video CDs Interconnectivity Your computer has Ethernet and i LINK functionalities i LINK is a bi directional digital interface for exchanging data Wireless technology Thanks to the Wireless LAN IEEE 802 11b technology you can communicate freely without cables or wires Windows Your system includes the Microsoft Windows XP Professional Service Pack 1 operating system Communications Access popular online services send and receive e mails browse the Internet and more Excellent customer support If you are experiencing any problems with your computer please check the VAIO Link website for a possible solution http www vaio link com Before contacting VAIO Link you may try to solve the problem by reading the User Guide or the manuals and help files for the peripherals or software Depending on your model See the printed Specification sheet Welcome Documentation pack Your Documentation Pack contains printed information and online user guides on your Hard Disk Printed documentation The printed part of your documentation contains Q E COOU LU A Getting Started brochure where you will find a brief description of the items in your box and how to setup your notebook A Troubleshooting Guide where you will find all the basic information you need to start using your notebook as well as
52. into the headphone connector 4 Q on the computer 3 Plug the microphone cable 5 into the microphone connector 6 4 on the computer 550568 GEE e of D0 o oll O Connecting peripheral devices Connecting a TV 67 You can connect a TV to the notebook or to the optional port replicator To connect a TV to the notebook proceed as follows 1 Plug one end of the audio video cable 1 optional into the AV Out connector 2 yellow and the other end into the TV 2 Plug the power cord of the TV 3 into an AC outlet Switch the input channel of the TV to external input Set up the TV configuration system 2 See the manual supplied with your peripheral for more information on installation and use If you insert a DVD in your DVD ROM drive to watch a video on your TV the lt Fn gt lt F8 gt key combination might not activate the function to toggle between your LCD and TV Solution 1 Eject your DVD from your computer 2 Once the DVD is ejected toggle between your LCD and your TV with the combination lt Fn gt lt F8 gt Your image displays now on both LCD and TV Re insert your DVD to launch your DVD software If the display resolution of your computer is more than 800 x 600 pixels a part of the image cannot be displayed on your TV The hidden area on your TV can be seen by moving the cursor on your computer If you want to display the ful
53. is preinstalled on your notebook therefore you only need to plug the USB mouse into the USB connector and you can start working Connecting peripheral devices 74 Connecting a USB floppy disk drive As an optional extra you can purchase a USB floppy disk drive and connect it to your computer To connect a USB floppy disk drive proceed as follows 1 Choose the USB connector you prefer to use 2 Plug the USB floppy disk drive cable into the USB connector The VAIO logo on the disk drive should be facing up Your USB floppy disk drive is now ready for use To remove a USB floppy disk drive proceed as follows Q If your computer is on wait until the floppy drive LED indicator turns off and then unplug the USB cable If the floppy disk drive is not removed properly your system may crash and you may lose any unsaved data 2 If your computer is off you can directly unplug the USB cable from the computer Connecting peripheral devices 75 Inserting a floppy disk To insert a floppy disk proceed as follows 1 Hold the disk 1 with the label side facing up 2 Gently push the disk into the drive 2 until it clicks into place Removing a floppy disk To remove a floppy disk proceed as follows When you have finished using the floppy disk wait until the LED indicator 1 turns off and then press the eject button 2 to remove the disk 0 Before pressing the eject button make sure that the LED indicat
54. k is equipped with an internal modem You need to connect to a phone line to take advantage of online services and the Internet as well as to register your computer and software online and to contact VAIO Link To connect a phone line proceed as follows 1 Plug one end of the phone cable 1 into the phone line jack on the computer 2 Plug the other end into the wall jack 2 1 Do not pull the flexible cover too forcefully A country specific phone plug is supplied with your VAIO notebook allowing you to plug the phone line into the wall jack We recommend you to use the supplied plug because the usage of any other phone plug can decrease the connection quality Your computer cannot be connected to a coin operated telephone and may not work with multiple phone lines or a private branch exchange PBX If you connect the modem to a parallel connected phone line the modem or the other connected device may not function properly Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem Only DTMF Dual Tone Multi Frequency signalling tone dialling is supported Before using the modem it will be necessary to select the country where you are actually using it The detailed procedure for selecting the actual country is explained in Configuring your modem in the Software User Guide Using your notebook 51 Using the correct phone plug If there are two phone plugs in the bo
55. k the cable to see if you do not have missing of bend pins Getting help 97 Q Try a printer self test if available to see if the printer itself is still working properly For more information please consult the manual supplied with your printer 4 Some printers have a specific installation procedure Please check the manual supplied with your printer About digital video captures and DVgate While am recording images to a digital video device using DVgate my system displays the message Recording to DV device failed Check the power and cable connections to the DV device and try the operation again 4 Close all open applications and restart your computer Frequent recording of images to a digital video device while using DVgate sometimes causes this error 4 Your DV device will need to have DV In Out in order to be able to transfer your files to the DV device About power management The power management setting is not responding Your notebook s operating system may become unstable if a lower power state such as Hibernate is initiated and then changed before the notebook completely enters the lower power state To restore the notebook to its normal operating stability proceed as follows 1 Close all open applications 2 Press lt Ctri gt lt Alt gt lt Delete gt simultaneously and select Restart from the drop down list The notebook restarts 3 If the procedure does not work press and hold the power button for
56. l image change the display resolution of your computer to 640 x 480 pixels Connecting peripheral devices 68 To connect a TV to the port replicator proceed as follows 1 Attach the port replicator to your notebook 2 Plug one end of the audio video cable 1 optional into the headphone connector 2 green and the other end into the Audio Left and Audio Right connectors on your TV 3 Plug oneend of the S video cable 3 optional into the S Video out connector 4 and the other end into the S video connector on your TV 4 Switch the input channel of the TV to external input Set up the TV configuration system Jo pee o Connecting peripheral devices 69 Connecting a projector You can connect a projector such as the Sony LCD projector directly to your notebook or via the port replicator To connect a projector proceed as follows Plug the RGB signal cable 1 into the monitor VGA connector 2 identified by the O symbol Plug the audio cable 3 not supplied into the earphone connector 4 identified by the Q symbol Plug the RGB signal cable and the audio cable into the connectors of the projector 5 Connect the power cord 6 of the projector into an AC outlet Aa W N 9 You may not be able to display the computer s LCD and the external display together depending on the types of computer oe f O display and projector used You can toggle the output between the not
57. leca eae of IM e oll oy a OO000000000000 OO00000000000 Before using the printer you may need to change the Printer settings in the Sony Notebook Setup software Connecting peripheral devices 78 Connecting an 1 LINK device Your computer includes an i LINK IEEE1394 connector which you can use to connect to an i LINK device such as a digital video camera recorder or to connect two VAIO notebooks in order to copy delete or edit files The i LINK connector of your notebook does not supply power to external devices generally powered by I LINK connectors The i LINK connector supports transfer rates up to 400 Mbps however the actual transfer rate depends on the transfer rate of the external device The i LINK features available may vary depending on the software applications you use Refer to the documentation that came with your software for more information i LINK cables compatible with your VAIO notebook include cables with the following part numbers VMC IL4415A a 1 5 meter cable with a 4 pin connector at each end VMC IL4408Series a 0 8 meter cable with a 4 pin connector at each end 0 An iLINK connection with other compatible devices is not fully guaranteed The i LINK connection varies depending on the software applications operating system and i LINK compatible devices you use Refer to the documentation that came with your software for more information Check the working conditio
58. ls the higher the resolution and the better the image quality Glossary Term Port replicator Processor Product recovery CD ROM PS 2 PSTN RAM Resolution RGB signal cable SDRAM Standard RAM 114 Definition An additional device that you can connect to your notebook The port replicator contains ports that enable you to connect additional peripherals such as a printer or a monitor to your VAIO A port replicator is similar to a docking station but does not include additional slots for adding expansion boards or storage devices The processor is the brains of the computer it processes the instructions of your system s programs The processor is also known as the CPU or microprocessor and can be found on the motherboard see this word of your computer The product recovery CD ROMs include the application recovery CD ROM and the system recovery CD ROM s A type of mouse or keyboard port PSTN Public Switched Telephone Network refers to the plain old telephone service the national telecommunication networks implementing voice transmission by using analog signals Short for Random Access Memory the memory used to run programs and store data in current use RAM is the fastest kind of memory to read from and write to Information stored in RAM is lost when you turn off the computer The higher the RAM capacity the faster your current data can be processed The degree of sharpness and clarity of an image R
59. ly lower when you are sitting in front of the monitor Tilt stands Use the tilt stands 1 to place the computer at an angle that allows comfortable typing 0 See o a e fe Ke 0 Ee e Z gt e WV 1g your notebook lt _ lt _P 14 Using your notebook This section describes how to start using your computer and how to use your computer s internal and external devices Locating controls and connectors Right lo o ventilation slot page 17 3 battery bay page 20 1 Do not cover the ventilation slot when the computer is on 1 gt tes oO a fe e Ke co a fe Z gt e WV 1g your notebook lt _ lt _P 15 Left i LINK IEEE1394 S400 port page 78 Memory Stick slot page 41 a PC Card slots page 39 multipurpose bay for weight saver or second battery with weight saver or page 20 removable CD RW DVD ROM drive page 38 page 35 Using your notebook Front V SES pea E el lo N H Gl LCD screen speakers keyboard touchpad left right buttons power indicator battery 1 and 2 indicators oOo N AoA A WW N hard disk drive indicator CLF PEE ys SSO LL J page 105 9 page 70 10 page 29 11 page 34 12 page 34 13 page 33 14 page 33 page 33 7 8 9 fio Wireless LAN indicator Wireless LAN switch Memory Stick
60. m properly Leave the unit for a while until the battery is recharged then try to start it The message Press lt F1 gt to resume lt F2 gt to setup appears at startup If the floppy disk drive is empty proceed as follows to initialise the BIOS 1 2 3 Turn off the computer Remove any peripheral devices connected to the computer Turn on the computer and press lt F2 gt when the Sony logo appears The BIOS setup menu screen appears Set the date month day year Getting help O On cD UV 11 12 13 87 Press Enter Press the arrow keys to select System Time Set the time hour minute second Press Enter Press the arrow keys to select the Exit menu Press the arrow keys to select Get Default Values and then press lt Enter gt The message Load default configuration now appears Make sure that Yes is selected and then press lt Enter gt Press the arrow keys to select Exit save changes and then press lt Enter gt The Save configuration changes and exit now message appears Make sure that Yes is selected and then press lt Enter gt My computer does not shut down You are recommended to shut down your computer using the Turn Off command on the Windows Start menu Using other methods including those listed here may result in loss of unsaved data If the Turn Off command does not work properly proceed as follows Q Q Press lt Ctrl gt lt Alt gt lt Delete gt If you have not chang
61. most enjoyment out of your photographs taken with a digital camera Customizing your computer explains how to set your system and power management Installing and updating applications explains how to install run or uninstall a software application Managing drivers explains how to install update or uninstall a driver Using the Product Recovery CD ROMs explains how to perform a system and application recovery Using partitioned drives tells you what you can do with partitioned drives 3 In the VAIO Link Customer Service Guide you will find all the VAIO Link information you need including specific contact numbers and addresses for each country 4 Consult the Online Help files of the software you are using for detailed information on features and troubleshooting Refer to the Microsoft Quick Start manual for more information on Windows Go to http Awww club vaio sony europe com to find online tutorials about your favourite VAIO software 0 See o a e fe Ke co a fe Z A e WV Your notebook and its accessories The following hardware items are in the box main unit product recovery CD ROMs 8 powercord documentation pack 9 CD RWIDVD ROM rechargeable battery pack Pf meor 11 Welcome 12 Ergonomic considerations You will be using your notebook as a portable device in a variety of environments Whenever possible you should attempt to take account of the following er
62. n for more than four seconds the computer will switch off automatically When the computer is in Hibernate mode you cannot insert a disc Hibernate mode requires more time than Standby mode to be activated It takes more time to return to normal mode from Hibernate mode than from Standby mode Hibernate mode uses less power than Standby mode Do not move the notebook until its power indicator turns off 54 Using your notebook 55 Using Wireless LAN WLAN Thanks to Sony s Wireless LAN WLAN all your digital devices with built in WLAN functionality communicate freely with each other through a powerful network A WLAN is a network in which a mobile user can connect to a local area network LAN through a wireless radio connection So there is no need anymore to pull cables or wires through walls and ceilings The Sony WLAN supports all normal Ethernet activities but with the added benefits of mobility and roaming You can still access information internet intranet and network resources even in the middle of a meeting or as you move from one place to another You can communicate without an Access Point this means that you can communicate between a limited number of computers ad hoc or you can communicate through an Access Point which allows you to create a full infrastructure network infrastructure In some countries using WLAN products may be restricted by the local regulations e g individual licence limited number of c
63. nctions originating from the user changing the DVD region code are beyond the scope of your warranty and will result in service charges for repair My USB floppy disk drive cannot write to a floppy disk Q E E The floppy disk is write protected Disable the write protect feature or use a floppy disk that is not write protected Check that the disk is properly inserted into the floppy disk drive Your disk may be corrupt Try to insert another floppy disk Getting help 92 When I double click an application icon a message such as You must insert the application CD into your CD ROM drive appears and the software does not start 4 Some titles require specific files that are located on the application CD ROM Insert the disc and try starting the program again 4 Make sure you place the disc in the tray with the label side facing up Why does my CD RW drive not record at the highest speed You must use 8x CD R or 4x CD RW media or higher to achieve optimum performance If you want to use other media and are having difficulty formatting non 4x CD RW discs change the writing speed from 4x to a lower setting To change the writing speed from the default to a lower speed proceed as follows Go to My Computer from the Start menu Right click the disc drive icon Select Properties Select the Settings tab Change the Current Write Speed field Click OK 0 The VAIO notebook has a maximum recording rate of 8x for CD R and
64. ned herein at any time without notice The software described herein is governed by the terms of a separate user licence agreement Trademarks Sony DVgate Hotkey i LINK MovieShaker Network Smart Capture PictureGear Studio VAIO Web Phone Sony Notebook Setup UI Design Selector VAIO Edit Components Sony Style Imaging SonicStage Memory Stick and the Memory Stick logo VAIO and the VAIO logo are trademarks of Sony Corporation Microsoft Windows and the Windows logo Windows Media and Outlook are trademarks or registered trademarks of U S Microsoft Corporation in the U S and other countries i LINK is a trademark of Sony used only to designate that a product contains an EEE1394 connection Adobe Adobe Premiere Adobe Photoshop Elements and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated QuickTime and the QuickTime logo are trademarks used under licence QuickTime is registered in the U S and other countries Read this first RealOne Player is a trademark or registered trademark of RealNetworks Inc in the U S and other countries PowerPanel is a trademark of Phoenix Technologies Ltd Symantec Norton AntiVirus is a trademark of Symantec Corporation All other names of systems products and services are trademarks of their respective owners In the manual the or marks are not specified Specifications are subject to change without notice All other trademarks are trademarks of their respective o
65. nger or metallic objects Use only the label supplied with the Memory Stick as a label Do not bend drop or apply strong shock to the Memory Stick Do not disassemble or modify Memory Sticks Do not let Memory Sticks get wet Do not use or store Memory Sticks in a location subject to 2 Extremely high temperatures such as in a car parked in the sun 2 Direct sunlight 2 High humidity or near corrosive substances Use the storage case supplied with the Memory Stick Glossary Glossary This section refers to terms used in this manual These terms and definitions have been compiled to provide 110 you with a better understanding of your VAIO computer Term lt F1 gt key 1OBASE T 100BASE TX ACPI Application recovery Application recovery CD ROM BIOS CardBus CD ROM Definition The lt F1 gt key gives you access to the online help of most software Ethernet system providing data transfer rates of 10 Mbps megabits per second and 100 Mbps The 100BASE TX is a very direct derivative of 10BASE T Its 100 Mbps speed is achieved by simply sending the signal 10 times faster Short for Advanced Configuration and Power Interface a power management specification ACPI enables the operating system to turn peripherals on and off and to control the amount of power given to each device attached to the computer With ACPI a CD ROM player can be turned off by the operating system if it is not in use
66. ns and OS compatibility of i LINK compatible PC peripherals HDD CD RW drive etc before you connect them to your notebook Connecting peripheral devices 79 Connecting a digital video camera recorder To connect a digital video camera recorder proceed as follows 1 Plug one end of the i LINK cable 1 into the i LINK connector 2 of the computer and the other end into the DV Out connector 3 on the digital video camera recorder 2 Launch the DVgate application 0 On Sony digital video cameras connectors labelled DV Out DV In Out or i LINK are i LINK compatible The Sony digital video camera recorder is an example your digital video camera recorder may need to be connected differently If your digital video camera recorder includes a Memory Stick slot you can copy images from it to your computer via a Memory Stick To do so simply copy images on the Memory Stick then insert it into the Memory Stick slot of your computer necting peripheral devices lt SP 80 Connecting two VAIO notebooks You can copy edit or delete files on another VAIO computer to your computer with an optional i LINK cable You can also print a document on a printer connected to another VAIO computer 0 UO See o a e fe Ke co a fe Z PA e WV Se Se SS SSSSSS SSSSOSS S lt KISTAR IR AOAN SS RSS RSS o SSS g gt Connecting peripheral devices 81
67. nt seems to be disconnected or turned off appears Q E Check that the DV device is turned on and that the cables are properly connected If you are using multiple i LINK devices the combination of the connected devices may cause unstable operation In this case turn off the power of all connected devices and disconnect unused devices Check the connection and then turn on the power again Use manual import export in DVgate Motion if problems occur with third party cameras You are strongly advised to use only Sony i LINK cables as using other brands may cause problems with the i LINK devices My PC Card is not working Q Q E Make sure the PC Card is compatible with your version of Windows Use the Sony Notebook Setup utility to disable devices you are not currently using If you are using two PC Cards use the Sony Notebook Setup utility to disable the devices you are not currently using I cannot print Q E Q Check that the printer cables are correctly connected Check that your printer is correctly configured and that you have up to date drivers If needed contact your dealer The default setting for the printer port mode is correct for most printers If you cannot print try changing the printer port mode In Sony Notebook Setup select the Device tab If the printer port mode is set to ECP change it to bi directional If the printer port mode is set to bi directional change it to ECP Chec
68. on subject to mechanical vibration or in unstable situation Do not move your computer while the power is on Do not turn off the power or restart the computer while reading or writing data Do not use your computer in a place subject to extreme change of temperature Do not move your computer while the system is in Standby mode n If the hard disk is damaged the data cannot be restored Precautions 105 On handling the LCD screen Q Q Do not leave the LCD facing the sun as it can damage the LCD Be careful when using the computer near a window Do not scratch the LCD or exert pressure on it This could cause malfunction Using the computer in low temperature conditions may produce a residual image on the screen This is not a malfunction When the computer returns to normal temperature the screen returns to normal A residual image may appear on the screen if the same image is displayed for a lengthy period of time The residual image disappears in a while You can use a screensaver to prevent residual images The screen becomes warm during operation This is normal and does not indicate a malfunction The LCD is manufactured using high precision technology You may however see tiny black points and or bright points red blue or green that continuously appear on the LCD This is a normal result of the manufacturing process and does not indicate a malfunction Avoid rubbing the LCD screen as this can damage the s
69. onic snapshot of the screen and moves it to the Windows Clipboard You can then paste the screenshot into a document and print it The lt Insert gt lt Back Space gt and lt Delete gt keys enable you to make corrections These keys enable you to move the cursor on the screen The Application key displays a shortcut menu pressing this key is equivalent to clicking the right mouse button Contains the keys found on a typical calculator Use the numeric keypad area to type numbers or to perform mathematical calculations such as addition and subtraction Note that you must press the lt Num Lock gt key to activate the numeric keypad When you do so the Num Lock indicator illuminates Several keys are always used with at least one other key lt Ctrl gt lt Alt gt and lt Shift gt When held down with another key the lt Ctrl gt Control and lt Alt gt Alternate keys offer another way to execute commands For example in many applications instead of choosing the Save command from a menu you can hold down lt Ctrl gt and press lt S gt referred to as lt Ctrl gt lt S gt The lt Shift gt key is used to produce capital letters or special symbols such as and The key with the Windows logo displays the Windows Start menu it is equivalent to clicking the Start button on the taskbar The lt Fn gt key is used in combination with other keys to execute commands 30 Using your notebook Combinations and functions
70. or is turned off If the disk does not come out by pressing the eject button disconnect the floppy disk drive from the computer Do not press the eject button while the LED indicator is on It may damage the floppy disk Connecting peripheral devices 76 Connecting a printer You can connect a Windows compatible printer to your computer to print documents Connecting a printer using the USB connector You can connect a USB printer compatible with your version of Windows to your computer To connect a printer using the USB connector proceed as follows 1 Plug a USB printer cable into one of the USB connectors on your notebook A USB connector is identified by the YY symbol on your notebook and printer 2 Plug the printer power cord into an AC outlet Before using the printer you may need to change the Printer settings in the Sony Notebook Setup software Turn off your computer and the printer unplug the AC adapter and the power cord before connecting the printer necting peripheral devices lt SP 77 Connecting a printer using the printer connector To connect a printer using the printer connector proceed as follows 1 Plug the printer cable 1 supplied with the printer into the printer connector 2 identified by the symbol 2 Plug the printer power cord 3 into an AC outlet 2 0 Ses Q a e fe Ke 0 Ee fe Z gt e W SS Sanne nll o BBSEES
71. r during charge and discharge Lithium ion batteries are the first choice for notebooks because of their light weight high energy density and because they have no memory effect In addition they do not use heavy metals like lead mercury or cadmium Short for Messaging Application Program Interface A Microsoft Windows interface enabling you to send e mail messages It allows e mail access and distribution among applications MAPI compatible applications include a Send Mail or Send in the File menu of the application The maximum amount of RAM that your computer can contain Once this amount is reached you can no longer add additional RAM to your computer The motherboard is the main circuit board inside your computer It holds the CPU the BIOS the memory and so on Glossary Term MPEG Operating system Partition PBX PC Card PCMCIA Pixel 113 Definition MPEG or Moving Pictures Experts Group is a standard for audio visual compression of video sequences MPEG achieves high compression rates by storing only the changes from one frame to another The decrease in data is generally imperceptible to the human eye MPEG 1 was developed for digital storage of video and audio data on CD ROM MPEG 2 achieves better image and audio quality and is more targeted to TV broadcasting and DVD The operating system is software that manages all the other programs in a computer It defines how the computer reads and writes information to
72. rotects your computer from data loss in the event of a power failure The battery takes over as soon as a power interruption is detected If you are using the computer when the power failure occurs you have time to save all unsaved data and to shut down your computer USB Universal Serial Bus is a hardware interface for attaching devices such as a keyboard mouse joystick scanner or printer You can connect up to 127 devices to a USB port The USB standard is Hot Plug and Play Short for Video Audio Integrated Operation Brand name covering Sony s PC products peripherals accessories and software VAIO branded items are all designed to make the best use of Sony s Audio Video AV and Information Technology IT skills WAN Wide Area Network is a computer network connected together and covering a relatively large geographical area This is in contrast to LAN where the network is usually set up within one building or small geographical area The largest existing WAN is the Internet Short for Extended Graphic Array a graphics standard An XGA board can provide up to 1 024 x 768 pixels and supports up to 65 thousand colours
73. s leaflet A Modem Regulations leaflet A Specifications sheet Getting help 83 Online user guides on your Hard Disk The Sony Notebook User Guide 1 Q Q E E Q Using your notebook shows you how to use the standard components of your system In this part of the manual you will also find out what you can do with a Memory Stick and how to use the Wireless LAN functions Connecting peripheral devices explains how you can add functionality by connecting various peripherals Getting help explains the support options available to you and offers basic troubleshooting tips Precautions provides facts and advice about using your notebook Glossary refers to terms used in this manual Refer to your Software Guide for information on the bundled software and the Sony applications Q Q About the Software is a short description of the features of the software that comes with your computer Using Video software explains how to use Sony video software DVgate MovieShaker and Network Smart Capture Managing audio files with SonicStage explains how to convert your existing MP3 WMA and WAV format audio files into ATRAC3 format Using PictureGear Studio explains how to get the most enjoyment out of your photographs taken with a digital camera Customizing your computer explains how to set your system and power management Installing and updating applications explains how to install run or uninstall a software
74. simple solutions Please try these suggestions before contacting VAIO Link About the computer and software page 86 About the display page 89 About CD ROMs and floppy disks page 90 About sound page 94 About the modem page 95 About peripherals page 96 About digital video captures and DVgate page 97 About power management page 97 About i LINK devices page 98 About Wireless LAN page 98 DuUNdDUODUODUOLHOU LE Getting help 86 About the computer and software My computer does not start UOO OUO O E Check that the computer is plugged into a power source and that it is turned on Check that the power indicator on the front panel of the computer indicates that the power is on Check that the battery packs are inserted properly and that they are charged Make sure there is no disk in the floppy disk drive Confirm that the power cord and all cables are connected firmly If you have plugged the computer into a UPS Uninterruptible Power Supply make sure the UPS is turned on and works If you are using an external display check that it is plugged into a power source and turned on Check that you have switched to the external display and that the brightness and contrast controls are adjusted correctly Moisture condensation may have occurred Leave the computer off for at least one hour and then turn it on When the internal backup battery is low on power it may not be able to start your syste
75. stacles or the distance between the communication devices the radio waves the operating system or the software you use Remove the obstacle or make the distance between the Access Point and your machine smaller Q It is possible that your Access Point communicates at the same time with another Access Point Read the manual of the Access Point 2 If several computers communicate with the same Access Point the concentration may be too high Wait a few minutes and try to access again I cannot access the Internet 2 Check the settings of the Access Point See the manual of the Access Point 4 Check if your computer and the Access Point are communicating 2 Make the distance between the Access Point and your machine smaller The maximum communication speed is not reached The maximum communication speed is 11 Mbps but this can never be reached The normal speed is 4 to 5 Mbps The communication speed slows down when transferring MPEG2 data Precautions 100 Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage Your notebook and memory modules use high precision components and electronic connectors technology To avoid the invalidation of your guarantee by mishandling it is recommended that 2 You contact your dealer to install anew memory module 2 You do not install it yourself if you are not familiar with upgrading memory on a notebook 2 You do not touch
76. t and then 4 or gt To decrease volume press lt Fn gt lt F4 gt and then or amp Adjusts the brightness of the LCD To increase lightness intensity press lt Fn gt lt F5 gt and then 4 or gt To decrease light intensity press lt Fn gt lt F5 gt and then or lt q Toggles between the LCD external display connected to the monitor connector and both LCD and external display This function can only be used by the first user to log in It will not work under a second user account Toggles between the LCD and both LCD and TV This function can only be used by the first user to log in It will not work under a second user account Provides for the lowest level of power consumption When you execute this command the states of the system and of the peripheral devices are written to the hard disk and the system power is turned off To return the system to its original state use the power switch to turn on the power This function can only be used by the first user to log in It will not work if you have switched to another user account Using your notebook Indicators Indicator l Power C Battery 1 Battery 2 Memory Stick sas Light hard disk Num Lock Caps Lock Scroll Lock PAG 33 Functions Power on lights green Standby mode flashes umber Indicates the status of the battery inserted in the battery bay on the left side of the computer Indicates the status of the battery
77. ternet Since it is compatible with MagicGate you can use SonicStage to transfer music that you have downloaded onto your PC to your MG Memory Stick and playback on other Magic Gate equipped devices and media Copyright protection People who create artistic works such as music are entitled to a copyright meaning that they have exclusive rights to dictate how their work is used When they are created artistic works are automatically protected by a copyright without having to submit notification or registration and may not be used without the permission of the person who created the work In the music world however illegal acts of distributing music without the permission of the artist particularly on the Internet have recently been on the increase That is why the Recording Industry Using your notebook 46 Association of America RIAA took the initiative to organize a forum called Secure Music Digital Initiative SDMI to study technology for protecting copyrights during the electronic distribution of music Sony offers the MagicGate Memory Stick and Memory Stick Walkman with a copyright protection function that complies with SDMI standards thereby providing an environment where individuals can record and enjoy third party music data without worrying about copyright infringement Literary works that are recorded by individuals are permitted for private usage only Compatible devices There are nearly 80 Memory Stick
78. the pre installed software Using your notebook 37 Using the DVD function To achieve optimum performance when playing DVD ROM discs you should follow these recommendations Q E You can play DVDs using the DVD ROM drive and the WinDVD for VAIO software See the help file on the WinDVD for VAIO software for details Your computer should not be connected to the port replicator while playing DVD movies or using DVD applications Close all open applications before playing a DVD ROM movie When playing DVD movies on battery power set the power management profile to DVD With other profiles the movies can be choppy Do not switch power saving modes while playing a DVD video Do not use resident disc utilities or resident utilities to speed up the access of discs because they may cause the system to become unstable Make sure that the screensaver is deactivated Depending on the display setup properties you selected you may use the lt Fn gt lt F gt command to expand the screen to full screen size Region codes indicators are labelled on the DVD discs to indicate in which region and on what type of player you can play the disc Unless a 2 Europe belongs to region 2 or all this means that you can play this DVD everywhere in the world is labelled on your DVD disc or on the packaging you cannot play the disc on this player Do not try to change the region code settings of the DVD ROM drive Any difficulties ca
79. the processor or microprocessor and can be found on the motherboard of your computer The Direct Current interface to which you connect your computer s AC adapter An additional device that you can connect to your notebook The docking station contains slots for expansion boards bays for storage devices and ports for additional peripherals such as printers or monitors A driver is software enabling you to use hardware devices For example in order for you to be able to use a printer you must first install its driver Many drivers such as the mouse driver come with the operating system Short for Digital Video Disc A type of read only CD with a minimum capacity of 4 7 GB maximum capacity can reach 17 GB This high storage power makes it the ideal medium for storing films Ethernet is the most widely implemented local area network LAN technology The Ethernet system called 10BASE T provides data transfer rates of 10 Mbps megabits per second A more recent version of Ethernet called 100BASE T provides data transfer rates of 100 Mbps Gigabit Ethernet supports data rates of 1 gigabit 1 000 megabits per second EULA End User License Agreement is the name given to a license governing the software on your computer The EULA can be found in the Read this first section at the beginning of the software guide or directly on the VAIO desktop i LINK is Sony s version of the IEEE 1394 standard for high speed digital serial interface
80. this you need an optional PC Card adapter You can only insert one Memory Stick at a time To insert a Memory Stick using the Memory Stick slot proceed as follows 1 Once you have stored your data from your digital device insert the Memory Stick with the arrow facing up and toward the Memory Stick slot 2 Carefully slide the Memory Stick into the slot until it clicks in place The Memory Stick is automatically detected by your system and appears in your My Computer window as a local drive under the appropriate letter depending on the configuration of your computer 0 Hold the Memory Stick with the arrow pointing in the correct direction when you insert it into the slot To avoid damaging the computer or the Memory Stick do not force the Memory Stick into the slot if it does not insert smoothly 0 S Y a 5 e fe Ke 0 Ee fe Z PA fe WV 1g your notebook Removing a Memory Stick To remove a Memory Stick using the Memory Stick slot proceed as follows 1 Check that the access light is off 2 Push the Memory Stick in towards the notebook The Memory Stick ejects 3 Pull the Memory Stick out of the slot 0 Always remove the Memory Stick gently or it may pop out unexpectedly It is recommended that you remove the Memory Stick before shutting down the computer 49 Using your notebook 50 Using the modem Your noteboo
81. tically while using a battery as the source of power Some PC Cards or their functions may not be compatible with this computer Using your notebook 41 Using Memory Stick Your VAIO computer is designed to support the Memory Stick The Memory Stick is a compact portable and versatile device especially designed for exchanging and sharing digital data with compatible products Because it is removable it can be used for external data storage Use the flash memory technology to download anything that can be converted into digital data such as pictures music words sounds movies and photographs Foreseen as the universal data storage device of the future the Memory Stick can already be used with an ever increasing range of compatible products including Audio systems Visual devices VAIO products CLIE handhelds Mobile phones UOU O O O There are currently two different types of Memory Stick 2 The generic Memory Stick coloured blue 2 The MagicGate Memory Stick coloured white 0 You can purchase Memory Sticks from the Sony Style website http www sonystyle europe com or from your local Sony dealer Why Memory Stick Sony s vision is to expand the world of communication promoting the portability of digital data The Memory Stick is the resulting medium through which digital devices can be instantly connected With it you can download data from any compatible device then transfer it
82. to 30 C Lower temperatures require a longer charging time While the battery is in use or being discharged the battery pack heats up This is normal and is not cause for concern Keep the battery pack away from all sources of heat Keep the battery pack dry Do not open or try to disassemble the battery pack Do not expose the battery pack to any mechanical shock If you are not using the computer for an extended period of time remove the battery pack from the computer to prevent damage to the battery If after fully charging the battery pack the battery power is still low the battery pack may be reaching the end of its life and should be replaced Precautions Q Q 109 You do not need to discharge the battery before recharging If you have not used the battery pack for a considerable amount of time recharge the battery On using headphones Q Road safety Do not use headphones while driving cycling or operating any motorized vehicle It may create a traffic hazard and is illegal in some areas It can also be potentially dangerous to play loud music while walking especially at pedestrian crossings Preventing hearing damage Avoid using headphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce the volume or discontinue use On handling the Memory Stick UOO OUO O Do not touch the Memory Stick connector with your fi
83. troubleshooting and VAIO Link information An Application CD Guide Your Sony Guarantee conditions A Safety Regulations leaflet A Wireless LAN Regulations leaflet A Channel Selection leaflet A Modem Regulations leaflet A Specifications sheet Online documentation The Documentation on your Hard Disk contains the following references 1 The Hardware Guide 2 Using Your Sony Notebook shows you how to use the standard components of your system In this part of the manual you will also find out what you can do with a Memory Stick and how to use the Wireless LAN functions 4 Connecting Peripheral Devices explains how you can add functionality by connecting various peripherals Welcome E E E 10 Getting Help explains the support options available to you and offers basic troubleshooting tips Precautions provides facts and advice about using your notebook Glossary refers to terms used in this manual 2 Refer to your Software Guide for information on the bundled software and the Sony applications Q Q E E About the Software is a short description of the features of the software that comes with your system Using Video software explains how to use Sony video software DVgate MovieShaker and Network Smart Capture Managing audio files with SonicStage explains how to convert your existing MP3 WMA and WAV format audio files into ATRAC3 format Using PictureGear Studio explains how to get the
84. ule pull the tabs in the direction of the arrows 1 The memory module is released 7 Pull the memory module in the direction of arrow 2 103 8 Remove the new memory module from its packaging 9 Install the memory module by sliding it into the memory module slot as shown 10 Press the module into place until it clicks 9 J S o 1 D fe fe Ke co J fe Z PA c fe W 11 Close the computer cover 12 Tighten the screw on the bottom of the notebook 13 Turn on the computer Precautions 104 Viewing the amount of memory To view the amount of memory proceed as follows 1 Turn on the computer 2 Goto Sony Notebook Setup via the Start menu The Sony Notebook Setup dialog box appears 3 Inthe About this Computer tab you can view the amount of system memory If the additional memory does not appear repeat the whole procedure and restart the notebook Other precautions On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time On the other hand it may be easily damaged by mechanical vibration shock or dust Although the hard disk has the safety device in itself to prevent losing data due to mechanical vibration shock or dust you should be careful when handling your computer To avoid damaging your hard disk DUUWUUOWUODU O Do not give a shock to your computer Keep away from magnets Do not place your computer in a locati
85. use CD RW and CD R discs E Q The CD RW CD ReWritable disc is a data memory medium that can be used to write erase and rewrite a program or other data The CD R CD Recordable disc is a data memory medium that can be used to write a program or other data but once only To achieve optimum performance when writing data on a CD RW disc follow these recommendations Q Q E To make a CD R s data readable on a CD ROM drive you need to close the session when you eject it To complete this process follow the instructions included with your software Only use circular discs Do not use discs with any other shape star heart card etc as this may damage the CD RW drive Do not strike or shake the computer while writing data to a disc For optimal writing speed deactivate the screensaver before writing data to a disc Memory resident disc utilities may cause unstable operation or data loss Deactivate these utilities before writing data to a disc For best results use the CD Rs that are compatible with 16x speed as the software pre installed on your computer is preset to that speed Your VAIO notebook does not support 1x or 2x writing speed When using a software application to burn CDs be sure to exit and close all other applications Never touch the surface of the disc Fingerprints and dust on the surface of a disc may cause writing errors Do not put your VAIO notebook into a power saving mode while using
86. used by changing the region code settings of DVD ROM drive are out of warranty When a DVD video disc is inserted in the DVD ROM drive you cannot toggle between LCD and TV by pressing lt Fn gt lt F8 gt When a TV is connected a part of the video screen will not appear with the factory settings Adjust the display resolution to 640x480 Using your notebook 38 Using the weight saver The weight saver protects the multi purpose bay when it is empty and secures the second battery when it is installed in the multi purpose bay To attach the weight saver proceed as follows 1 If another device is in the multi purpose bay remove the device 2 Slide the weight saver in the direction of the arrow until it clicks into place To remove the weight saver proceed as follows 1 Slide the multi purpose bay release lever on the bottom of the computer in the direction of the arrow 2 Remove the weight saver Using your notebook 39 Using PC Cards Your computer includes two PC Card slots PC Cards allow you to connect portable external devices Inserting a PC Card To insert a PC Card proceed as follows 1 Insert the PC Card into one of the PC Card slots with the front label facing up Gently push the PC Card slot into the connector The PC Card is automatically detected by your system The Safely Remove Hardware icon appears in the system tray Some devices may not function properly if you repeat Returning to
87. ve saved For you this means you can expand the capabilities of your VAIO computer in the following scenarios 2 With your still digital camera share your holiday pictures instantly by e mail 2 From your handycam to your VAIO make the most of your captured moments with the VAIO s movie editing tools Carry pictures on you by copying image files from the Internet to your VAIO to your CLIE handheld 2 With your voice recorder add your voice to e mails so your tone is never misunderstood The blue Memory Stick is currently available with a 4 8 16 32 64 or a 128 MB memory the equivalent capacity of 88 floppy disks 0 Generic Memory Sticks cannot be used with the Memory Stick Walkman or with data that is protected by copyright Using your notebook AA MagicGate Memory Stick The MagicGate Memory Stick white in colour records PC and image data just like its blue counterpart the difference is it uses the MagicGate copyright protection technology With this type of Memory Stick also called the MG Memory Stick you can enjoy the following features Q Q Q UOU O O O 32 64 and 128 MB capacity versions Storage of up to 120 minutes of audio data Download and save 2 digital music 3 pictures 2 movies and more Combine data files to add music to your home movies for example Transfer and share data between several digital products MagicGate Copyright Protection Technology SD
88. wners ENERGY STAR As an ENERGY STAR Partner Sony has determined that this product meets the Enercy Star guidelines for energy efficiency The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment The program backs the development and dissemination of products with functions that effectively reduce energy consumption It is an open system in which business proprietors can participate voluntarily The targeted products are office equipment such as computers displays printers facsimiles and copiers Their standards and logos are uniform among participating nations ENERGY STAR is a U S registered mark TIN Read this first Safety information Warnings General DUUDDUOUNUOOUODL Opening the unit for whatever reason could lead to damages that are not covered by the guarantee To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only To prevent fire or shock hazard do not expose your VAIO notebook to rain or moisture Avoid using the modem during a severe electrical storm Do not use the modem or a telephone to report a gas leak in the vicinity of the leak To change the backup battery please contact your nearest Sony Service Centre Before you connect peripherals turn off the computer and all peripherals Connect the power cord only after connecting all cables Turn
89. x make sure you use the correct one for the country you are in as follows UK The connector can be identified by its cuboid shape and flat pins Netherlands The connector can be identified by its protruding pins Using your notebook 52 Using power saving modes When you use a battery as the source of power for your computer you can take advantage of power management settings to conserve battery life In addition to the normal operating mode which allows you to turn off specific devices your computer has two distinct power saving modes Standby and Hibernate When using battery power you should be aware that the computer automatically enters Hibernate mode when the remaining battery charge drops below 7 percent regardless of the power management setting you select If the battery level falls below 10 percent you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully charged battery Using Normal mode This is the normal state of your computer when it is in use The green power indicator light is on in this mode To save power while not working you can turn off a specific device such as the LCD or the hard disk Using Standby mode The computer saves the current state of the system in RAM and switches off power to the CPU The umber power light flashes in this mode To activate Standby mode proceed as follows Press the lt Fn gt and lt Esc gt keys simultaneously

Download Pdf Manuals

Related Search

Related Contents

    ROYER Labs Model R-122V Vacuum Tube Ribbon  取扱説明書 はじめに ご注意 警 告 安全に関するご注意 注 意 警 告  Manuel d`installation PANNEAU SMARTLIGHT GRADUABLE  l® RESOL DeltaSol® BS Plus *48000510*  Westinghouse One-Light Indoor Multi-Directional Flush-Mount Ceiling Fixture 6662400 Instruction Manual    

Copyright © All rights reserved. Failed to retrieve file