Quick Start Guide Digital Phone Card™
Contents
1. In the System Properties screen click on the System tab STEP 1 Register Your Card Register your DPC online at www socketcom com product prodreg htm You can also use the product registration form included in your DPC package STEP 2 Activate Data Service for Your Phone Some mobile phone carriers activate data service only when requested and may charge small fees If necessary ask your phone carrier for this feature Important If data service is not activated for your mobile phone then you will not be able to use your phone for any data connections STEP 3 Network Information Form Contact your office network administrator or Internet Service Provider ISP for the information below If you plan to use ISP services offered by your mobile phone carrier contact your carrier For a text only form that you can email go to the Docs folder on the installation CD or visit www socketcom com pdf dpcform txt 1 Please provide the following dial up information Dial up number ___ User name Password Domain 2 Does the network support DHCP Dynamic Host Configuration Protocol _ YES If Yes then STOP You do NOT need to answer Question 3 _ NO If No then continue to Question 3 You may need only some of the IP addresses listed below 3 Please specify any applicable IP addresses a Mobile Computer IP address b Subnet Mask c Default Gateway tj d Primary DNS we e Secondary2. functionally equivalent screens except where otherwise noted 1 Go to Start Settings Connections 2 Pocket PC Tap on Modem In the next screen tap New Connection Es Settings Es Settings 10 43a ok AvantGo New Connection Connect E a ee PE Socket LP E To start a modem connection go bo the Connections connections Folder Connections screen Modem Connections screen Pocket PC 2002 Tap on Connections In the next screen in the top field select Internet Settings Tap Modify In the next screen tap New EF Settings Internet Settings When needed automatically connect Create a connection or tap and hold on an Internet Settings ka When needed automatically connect to Work using these settings ig My network card connects ta Connections Dialing Locations a Connections screen Internet Settings screen 3 In the Make New Connection screen enter a name for the connection In the Select a modem field select Socket DPC Connection Make sure the Baud Rate is set to 19200 bps a 10 16 Make New Connection Enter a name For the connection Acmenet Wireless Select 4 moder Socket DPC Connection Baud rate Make New Connection screen 4 Tap on Advanced Do NOT change the default settings in Port Settings e If using DHCP you can probably keep the default settings in the TCP IP and Name Servers screens Tap ok e If NOT using DHCP click on the TCP IP and o
3. commands may be inserted into the dial string Call Options screen 6 In Make New Dial Up Connection tap on TCP IP Settings 11 7 Inthe TCP IP Settings screen follow your Network Information Form to enter settings appropriate to your office network or ISP e If using DHCP check Use server assigned IP address Tap OK TCP IP Settings General TCP IP Settings screen e If NOT using DHCP uncheck Use server assigned IP address Enter your mobile computer IP address in the IP address field and tap on the Name Servers tab to enter DNS and or WINS addresses Tap OK TCP IP Settings Name Servers screen 8 In the Make New Dial Up Connection screen tap Next gt 9 In the next screen enter the phone number of your office network or ISP Check Force long distance then tap on the Finish button Dial Up Connection Phone number screen 12 STEP 8 Make a Data Call Preliminary Checklist Is the card properly inserted into your mobile computer and is the cable connected securely to your mobile phone Is the phone receiving a digital signal A IB or equivalent will appear on the display of some phones Is the mobile phone s signal strength sufficient A minimum strength of two bars is recommended but some phones can send data with one For a better signal raise the antenna hold the phone upright and or relocate Does your phone have enough battery power for your data call Making a Data Call
4. for Pocket PC Devices This section primarily shows Pocket PC 2002 screens Pocket PCs will have functionally equivalent screens except where otherwise noted Placing a Data Call l If not already open start the connection you created for the DPC during remote networking setup Pocket PC Go to Start Programs Connections Tap on the connection you created for the DPC Pocket PC 2002 Go to Start Settings Connections Connections In the top field select Internet Settings Tap Connect od 236 D when needed automatically connect to The Internet using these settings Internet Settings Connect When needed automatically connect to Work using these settings My Connection 10 Connect g My network card connects to Work Connections Dialing Locations wy Connections screen Important For Internet Settings the Pocket PC 2002 must be set to use i e always dial your wireless DPC connection Tap Modify to adjust 13 2 Enter your User name and Password Pocket PC In the Dial from field select Home HF Logon to Network Servi 2 2 11 Network Log On Resource Acmenet Wireless User name gw erty _ Save password Network Log On screen 3 Optional For convenience you can check the Save password box but your password will be saved only after you start the connection 4 For some mobile computers you need to modify the dial properties For instructions refer to t
5. on the host PC screen until setup is done Note After completing setup your host PC may display an Application Downloading Complete screen Click OK 5 Disconnect the mobile computer from the host computer 6 Soft reset the mobile computer Push the reset button often on the back of the mobile computer STEP 6 Insert the Card and Attach the Phone Insert the Card With the mobile computer turned ON insert the DPC into your mobile computer s card slot Make sure the card s purple label is on top Plug the card into a PC Card adapter then insert combined unit into a PC Card slot Plug the card directly into a CompactFlash J I O slot OR D CASSIOPEIA PocketPC When properly inserted the card will be fully contained within the slot with only the connector and cable protruding Your mobile computer may not do anything to signal successful card insertion Warning Do NOT insert the DPC upside down or damage may occur Attach the Phone After inserting the DPC connect the free end of the data cable to the data port of your mobile phone The data port is typically on the bottom or side of the mobile phone In most cases it is the same port used for charging your phone STEP 7 Set up Remote Networking You will need your completed Network Information Form for this step Remote Networking for Pocket PC Devices This section primarily shows Pocket PC 2002 screens Pocket PCs will have
6. you tried to correct the problem Part Number Revision Level ARUN ADIA ITT 10 00078 B 2001 HELMIM ILII Mi Made in USA 01020001 00 E MAAN Serial Number To reach Socket s technical support department e Visit www socketcom com e Email techsupport socketcom com e Phone 510 744 2720 e Fax 510 744 2727 Copyright 2001 Socket Communications Inc The Digital Phone Card includes technology licensed under United States Patent Nos 4 543 450 4 603 320 4 686 506 and 4 972 470 6430 00181 C Printed in U S A
7. DNS f Primary WINS we g Secondary WINS _____ For remote ActiveSync only If your server does NOT have WINS services enabled you must use the IP address of your host computer instead of a Primary WINS address h Host computer IP address STEP 4 Uninstall Old Socket DPC Software Delete any old Socket DPC software that you may have previously installed on the mobile computer Refer to the README on the installation CD for uninstall procedures STEP 5 Install the Software Important For HP Jornada 500 series Pocket PCs the software drivers are pre installed Go ahead and connect the hardware Follow these steps for software installation BEFORE inserting the DPC 1 Make an active partnership between the mobile computer and a host PC An active partnership exists if data can be transferred between the mobile computer and host PC via a serial USB Ethernet connection cable or cradle 2 Insert the Socket Digital Phone Card Installation CD into the host PC 3 Run the SETUP HTM or SETUP EXE file on the CD ROM depending on what web browser your host PC uses by default gt IF YOUR DEFAULT WEB BROWSER IS INTERNET EXPLORER run the SETUP HTM file a Click Start Run on the host PC Type X SETUP HTM Replace X with your CD drive letter b In the File Download screen select the option that lets you run or open the file from its current location IMPORTANT YOU MUST RUN THE FILE DO NOT SA
8. Specially Designated Nationals or the U S Department of Commerce s Table of Denial Orders By using the SOFTWARE you represent and warrant that you are not located in under control of or a national or resident of any such country or on any such list GOVERNMENT END USERS If the SOFTWARE is supplied to the U S Government the SOFTWARE is classified as restricted computer software as defined in clause 52 227 19 of the FAR The U S Government s rights to the SOFTWARE are as provided in clause 52 227 19 of the FAR CONTROLLING LAW AND SEVERABILITY This License shall be governed by the laws of the United States and the State of California If for any reason a court of competent jurisdiction finds any provision or portion thereof to be unenforceable the remainder of this License shall continue in full force and effect 19 TECHNICAL SUPPORT If you have trouble installing or using the DPC please refer to the Troubleshooting section in the User s Guide in the Docs folder on the Socket Digital Phone Card Installation CD If you still have trouble contact Socket s technical support prepared with the following e The part number including revision level and serial number of your DPC See the diagram below e The manufacturer model number and operating system of your mobile computer e The manufacturer model number and carrier of your mobile phone e If applicable the Windows version on your host PC e How
9. VE IT File Download Ea You have chosen to download a file from this location setup exe from R LPE CD 101C WinCE What would you like to do with this file Save this program to disk M emas ask beoe apening this Wipe of fle Cancel More Info File Download screen from Internet Explorer 5 5 c A Security Warning screen will appear Click Yes gt IF YOUR DEFAULT WEB BROWSER IS NETSCAPE DO NOT run the SETUP HTM file on Netscape because it will not work properly Instead choose either of two options OPTION ONE Use Internet Explorer to run the SETUP HTM file a In the Internet Explorer screen click File Open b In the Open screen type X SETUP HTM Replace X with your CD drive letter Open 21 x Type the Internet address of a document or folder and S24 Internet Explorer will open it for you Open x lt SETUP HTM I Open as Web Folder Cancel Browse Open screen from Internet Explorer 5 5 c Proceed with the instructions described on the previous page for Internet Explorer OPTION TWO Run the SETUP EXE file Click on My Computer or use Windows Explorer to manually browse the CD to the WinCE or other appropriate directory and manually launch the SETUP EXE file found there Important Be sure to choose the SETUP EXE file NOT the SETUP HTM file The two file types have different icons Z PE im m EXE icon HTM icon for Netscape 4 Follow the instructions
10. ed to click on Remote Networking 2 Tap on the icon for your wireless DPC connection 3 In the next screen enter your User name and Password Dial Up Connection User Name Wireless Phone 11234567 Password fz Dial from Horne Domain Dial Properties Save password Connection settings screen 4 Optional For convenience you can check the Save password box but your password will be saved only after you start the connection 5 For some mobile computers you must modify the dial properties so the mobile computer can dial properly For instructions refer to the mobile computer s user manual 6 Tap Connect When your mobile computer starts calling you should see the call status on both the mobile computer screen and phone display Connecting to Acmenet Wireless Dialing T1234567 Hide this message it j Cancel connection Connection status screen 7 When a screen reports that you have Connected a connection icon DF will also appear in your mobile computer s task tray Connected to Acmenet Wireless Connected Hide this message Connection status screen 16 Ending a Data Call 1 Tap on the connection icon DF in the task tray 2 In the status screen that appears tap Disconnect The task tray icon will disappear and your mobile phone will hang up Connected to Acmenet Wireless Connected Hide this message Connection status screen 17 Limited Warranty Socke
11. he device s user manual 5 Ona Pocket PC tap Connect or on a Pocket PC 2002 tap OK 6 When your mobile computer starts calling you should see the call status on both the mobile computer screen and the phone display F Settings i212 0 Connecting to Acmenet Wireless Dialing From Horne Using Socket DPC Connection Connecting Dialing 99933386 Co 123 1 2 3 4 5 6 7 8 9 0 Tabjqajwje r t yjujijojejE cAPja sja fjgjhnjijkjif shift z xs c Y b njm coat a te SE Connection status screen 14 7 When a screen reports that you have Connected a connection icon Z will also appear in your mobile computer s task tray Connected to Acmenet Wireless From Home J Using Socket DPC Connection Connected Change connection settings New aS Connection status screen Ending a Data Call 1 Go to Start Today 2 Tap on the connection icon in the task tray 3 The call status screen will appear shown above On a Pocket PC tap Disconnect On a Pocket PC 2002 tap End The task tray icon will disappear and your mobile phone will hang up 15 Making a Data Call for Palm size and Handheld PC Devices This section primarily shows Handheld PC screens Palm size PCs and pen tablets will have functionally equivalent screens Any significant differences will be noted Placing a Data Call 1 Go to Start Programs Communication On some mobile computers you may also ne
12. ment of products damaged by abuse accident misuse or misapplication nor as a result of service or modification other than by Socket SOCKET IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY INCLUDING DAMAGE TO PROPERTY AND TO THE EXTENT PERMITTED BY LAW DAMAGES FOR PERSONAL INJURY THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Some states do not allow limitation of implied warranties or the exclusion or limitation of incidental or consequential damages so that the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state This product may contain fully tested recycled parts warranted as if new For warranty information phone 510 744 2700 18 Limited Software Warranty LIMITED WARRANTY SOCKET warrants that the original disk or CD ROM is free from defects for 90 days from the date of delivery of the SOFTWARE CUSTOMER REMEDIES SOCKET S entire liability and your exclusive remedy shall be at SOCKET S option either a return of the price paid or b replacement of the SOFTWARE which does not meet SOCKET S Limited Warranty and which is returned to SOCKET with a copy of your receipt Any replacement SOFTWARE will be warranted for the remainder of the original warrant
13. on Tap ok Create a connection or tap and hold on an existing connection and select a desired action My Connection 1 408 4929000 Ta 425 9998888 Always Dial Connect When dialing Use Acmenet Wireless Internet Settings screen 10 Remote Networking for Palm size and Handheld PC Devices This section primarily shows Handheld PC screens Palm size PCs HPC 2000s and pen tablets will have functionally equivalent screens Any significant differences will be noted 1 Palm size PC Go to Start Programs Communications Connections Make New Connection Handheld PC or pen tablet Go to Start Programs Communication Remote Networking Make New Connection 2 In the Make New Connection screen enter a name for the connection such as Mobile Phone Select Dial Up Connection then tap Next gt Make New Connection l Type a name for the connection Mobile Phone z l Laa O Direct Connection Make New Connection screen 3 The Make New Dial Up Connection screen will appear In the Select a modem menu select Socket DPC Connection Tap on Configure 4 In Device Properties ignore Port Settings and tap on the Call Options tab 5 In Call Options uncheck Wait for dial tone before dialing Tap OK Device Properties Port Settings Call Options Call Setup Cancel the call if not connected within 129 seconds Wait for credit card tone lo seconds Extra Settings special modem
14. r Name Servers tabs and follow your Network Information Form to enter any necessary IP addresses When done tap ok 4 10 17 O Advanced E Use server assigned IP address C3 Use specific IP address Use Slip Use software compression Use IF header compression TCP IP screen Advanced E Use server assigned addresses C4 Use specific server address BRS Alt DMS WINS Alt WINS Pork Settings TCPIIP Mame Servers Name Servers screen 5 When you return to the Make New Connection screen tap Next 6 In the next screen enter the dial up number and tap Next Spaces or dashes are not required within the phone number Tra Io T Settings m 10 19 Acmenet Wireless Country code rea code Phone number qqqesas Phone number screen 7 In the next screen uncheck Wait for dial tone before dialing Tap Finish fF Settings i 10 20 Acmenet Wireless Cancel call if not connected within seconds Wait For dial tone before dialing Wait For credit card tone b seconds Extra dial string modem commands Dialing settings screen 8 Pocket PC 2002 only After finishing connection setup you will return to Internet Settings If multiple connections exist then you must set up the device to dial the DPC connection Tap and hold your stylus on the DPC connection In the menu select Always Dial The bottom of the screen should now report that when dialing it will use this connecti
15. socket a Quick Start Guide for Digital Phone Card for Pocket PCs The Socket Digital Phone Card DPC allows you to connect your data capable mobile phone to your favorite Windows Powered Pocket PC Pocket PC 2002 or other Windows CE based mobile computer Now you can check email browse the web connect to your corporate network and synchronize files all wirelessly The DPC works with any application that you use with a regular modem You can use the DPC with these Windows CE based mobile computers e Mobile computers based on Windows CE v3 0 1 e Pocket PC Pocket PC 2002 and Handheld PC 2000 e Mobile computers based on Windows CE v2 11 i e Palm size PC Handheld PC and Handheld PC Pro This Quick Start Guide briefly describes how to set up and use the DPC for Windows CE based mobile computers For more detailed information please refer to the User s Guide in Adobe Acrobat PDF format in the Docs folder on the installation CD With the Upgrade Kit for Data Capable Phones you can also use the DPC with Windows 9x Me 2000 XP notebooks and Apple PowerBooks For more information please visit www socketcom com product dpc htm For software updates visit www socketcom com support support_dpc htm Your retail box may not completely list all the mobile phones compatible with your version of the DPC For a complete up to date listing please visit www socketcom com product dpc htm Installation S
16. t Communications Incorporated Socket warrants this product against defects in material and workmanship under normal use and service for the following periods from the date of purchase Plug in card Lifetime Three years if not registered Non removable cable Lifetime Three years if not registered Incompatibility is not a defect covered by Socket s warranty During the warranty period Socket will at its option repair or replace the defective product at no charge when furnished with proof of retail purchase provided that you deliver the product to Socket or to an authorized Socket Service Center The returned product must be accompanied by a return material authorization RMA number issued by Socket or by Socket s Authorized Service Center If you ship the product you must use the original container or equivalent and you must pay the shipping charges to Socket Socket will pay shipping charges back to any location in the contiguous United States This warranty applies only to the original retail purchaser and is not transferable Socket may at its option replace or repair the product with new or reconditioned parts and the returned product becomes Socket s property Socket warrants the repaired or replaced products to be free from defects in material or workmanship for ninety 90 days after the return shipping date or for the duration of the original warranty period whichever is greater This warranty does not cover the replace
17. teps Summary STEP 1 Register your card STEP 2 Activate data service for your mobile phone STEP 3 Complete the Network Information Form STEP 4 Uninstall old Socket DPC software STEP 5 Install the software STEP 6 Insert the card and attach the phone STEP 7 Set up remote networking STEP 8 Make a data call Software installation is not needed for HP Jornada 500 series Pocket PCs Different Windows CE Device Types Because the interface for different Windows CE based mobile computers varies some installation steps will be divided into sections based on Windows CE device type The two device types include e Pocket PC Devices 1 e Pocket PCs and Pocket PC 2002s e Palm size and Handheld PC Devices i e Palm size PCs Handheld PC 2000s Handheld PC Pros and pen tablets Warning Pocket PCs are not the same as Palm size PCs For some steps setup differs for the two mobile computers Pocket PCs and Pocket PC 2002s are based on Windows CE v3 0 while Palm size PCs are based on Windows CE v2 11 If you are not sure whether you have a Pocket PC or Palm size PC you can find out by identifying what Windows CE version your mobile computer has This is sometimes labeled as the Core System Version To determine the Windows CE version of your mobile computer go to either e Start Settings System On some mobile computers you also need to click on the About icon Start Settings Control Panel System
18. y period or 30 days whichever is longer THESE REMEDIES ARE NOT AVAILABLE OUTSIDE OF THE UNITED STATES OF AMERICA NO OTHER WARRANTIES SOCKET disclaims all other warranties either express or implied including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to the SOFTWARE and the accompanying written materials This limited warranty gives you specific legal rights You may have others which vary from state to state NO LIABILITY FOR CONSEQUENTIAL DAMAGES In no event shall SOCKET or its suppliers be liable for any damages whatsoever including without limitation damages for loss of business profits business interruption loss of business information or other pecuniary loss arising out of the use of or inability to use the SOFTWARE even if SOCKET has been advised of the possibility of such damages Because some states do not allow the exclusion or limitation of liability for consequential or incidental damages the above limitation may not apply to you EXPORT LAW ASSURANCES You may not use or otherwise export or reexport the SOFTWARE except as authorized by United States law and laws of the jurisdiction in which the SOFTWARE was obtained In particular but without limitation none of the SOFTWARE may be used or otherwise exported or reexported a into or to a national or resident of a United States embargoed country or b to anyone on the U S Treasury Department s list of
Download Pdf Manuals
Related Search