Smeg Instruments
Contents
1. B6040L STAINLESS STEEL BASE The frame with detergent compartment allows bringing the machine loading level up to an ergonomic height approximately 70 cm from the ground Made of stainless steel 7 Dimensions Ixdxh 2 600x530x400 mm T6040 STAINLESS STEEL FRAME The frame allows bringing the machine loading level up to an ergonomic height approximately 70 cm from the ground The frame also facilities cleaning the machine underneath Made of stainless steel a Dimensions x d x h 600x530x400 mm DETERGENTS Specific detergents are needed to obtain accurate washing and the most effective thermal disinfection of the treated medical instruments with professional instrument washers Smeg offers a complete range of alkaline detergents to be used during the washing phase and acid neutralizers to be used during the neutralization phase that are specially designed to guarantee efficient cleaning so much so that it favors a temperature disinfection action in the final thermal disinfection phase Smeg also offers numerous disinfectants used for treating thermolabile instruments and anesthesia instruments to be used in the machine during the thermal chemical procedure Special lubricants and additives that prolong the life of medical devices are available as well DENTAL NE Weak alkaline liquid detergent for delicate washing of handpieces and instruments made of titanium aluminium and stainless steel Package 1 box containing ten2. MAX 50 dB WD1160 TECHNICAL FEATURES OPTIONAL ELECTRONIC CONTROL MICROPROCESSOR STANDARD PROGRAMS STORED 15 CUSTOMISABLE PROGRAMS 6 DISPLAY WITH SEGMENTS AND COMMUNICATION LED ICONS YES TANK INTERNAL TEMPERATURE FROM ROOM TEMPERATURE TO 95 C TEMPERATURE SENSORS IN TANK 2 X PT 1000 CLASS B IEC 60751 DETERGENT DOSING SYSTEM MAX 8 LIQUID PUMPS DETERGENT LEVEL SENSOR YES SAFETY LOCK YES WITH ELECTROMAGNETIC RELEASE AND AUTOMATIC OPENING SAFETY DEVICES SAFETY THERMOSTATS DOOR INTERLOCK TRACEABILITY STORAGE OF DATA FOR 100 MOST RECENTLY RUN PROGRAMS RS232 SERIAL PORT FOR PC CONNECTION PRINTER YES CYCLE STORAGE YES WD TRACE EXCEL FORMAT STEEL WASH CHAMBER EXTERNAL PANELS AISI 316L AISI 304 WATER SUPPLY COLD AND DEMI WATER INLET 60 cm INCORPORATED WATER SOFTNER YES STEAM CONDENSER YES WATER HEATING ELECTRICAL 6 3kW ON TRI PHASE 2 3Kw ON MONO PHASE VERSION EXTERNAL DIMENSIONS WITH TOP EMBEDDED 600X605X850 830 MM INTERNAL DIMENSIONS 520X515X545 MM ELECTRICAL POWER SUPPLY 1 N PE 230V 50Hz 3 3 Kw 400V 50Hz 7 0 Kw 50 dB NOISE MAX 50 dB 088 23 TECHNICAL DATASHEET E E gt ag le OPTIONAL WD4060 TECHNICAL FEATURES ELECTRONIC CONTROL MICROPROCESSOR STANDARD PROGRA
3. ess Smeg INSTRUMENTS n Integrate solutions for dental sterilization centrals esgesmeg ese SINE For over 25 years Smeg Instruments has been recognized for its excellence in the medical instrument field The vast experience gained in sterilization centers in hospitals and private medical facilities is adopted in the dental field where avant garde eguipment for instrument treatment constructed in compliance with the latest standards is offered on a smaller scale Smeg Instruments a reliable partner at the service of dental studios ese SERVICE seggesmegser vice 00000 Smeg Instruments has numerous highly specialized service centers located in Italy and throughout the world Our customer support number assures prompt and qualified technical support for all your product needs Replacement parts are despatched within 24 hours of placing the order INNOVATION Smeg Instruments offers avant garde products carefully overseen in the finest details and developed by a team of engineers with the aid of the latest tools and instruments International patents guarantee the innovative features that make Smeg Instruments brand exclusive WARRANTY 4 Boasting tens of thousands of machines installed worldwide Smeg Instruments has acquired vast experience in the medical field For more than 25 years Smeg Instruments has offered the world of dental in
4. reduces water and energy consumption Innovative Speed Design Water and energy savings e Technology User friendly Flexibility and easy maintenance Compliance to standards 985 7 WHY CHOOSE AUTOCLAVE B One Innovative Autoclave B One carries out sterilization cycles with fractioned vacuum class B It is therefore able to sterilize hollow items such as loose or bagged resistant thermoplastic materials handpieces and turbines Production and steam emission take place in autoclave B One thanks to a patented double chamber system with incorporated steam generator that cuts down sterilization times and drastically reduces water and energy consumption Speed The length of the sterilization cycles plays a key role as it determines when instruments are available B One takes approximately 50 less time compared to common autoclave while at the same time assuring perfect results In fact B ONE performs class B sterilization cycles with bagged products including the drying stage in less than 20 minutes No time is wasted between cycles as the machine does not have to be preheated once started B One is always ready for use Design From its simple and essential lines B One does not lack style that has always gone hand in hand with the renowned Smeg design Ice white its appearance evokes accurate geometric symmetries its door does not have any handles
5. CS2 Made of stainless steel Dimensions Ixdxh 300x130x145 mm D ST10 TRAY CONTAINER SUPPORT Support for 10 basins trays Suggested position standard bottom trolley D CS2 or CS2 Made of stainless steel Dimensions Ixdxh 440x170x175 mm D SCT8l CONTAINER COVER SUPPORT Support for 8 tray covers Can be positioned on the lower level only Occupies 2 3 of D CS2 trolley 1 2 of CS2 trolley Made of stainless steel Dimensions Ixdxh 385x310x115 mm D ST11 TRAY SUPPORT Support for 11 trays Can be positioned on the lower level only Occupies 2 3 of D CS2 trolley 1 2 of CS2 trolley Made of stainless steel Dimensions 7 Ixdxh 335x305x115 mm 088 29 ACCESSORIES D ST16 TRAY SUPPORT Support for 16 trays Can be positioned on the lower level only Occupies 2 3 of CS2 trolley complete D CS2 trolley Made of stainless steel Dimensions Ixdxh 460x310x115 mm D SIMS SUPPORT FOR IMS UNITS Support for 6 IMS units or 12 IMS half units Can be positioned only on standard lower trolley D CS2 or CS2 Made of stainless steel Dimensions Ixdxh 445x230x155 mm SPD PLIERS SUPPORT Support for forceps Support for vertical positioning of forceps Made of stainless steel Dimensions Ixdxh 305x150x135 mm D SCT8S SUPPORT FOR CONTAINER COVERS Support for 8 tray covers Recommended for the D CS1 trolley Made of stainless steel Dimensions Ixdxh 445x310x120 mm
6. HOUSING AISI304 088 35 PROFESSIONAL FURNISHING Smeg Instruments offers a number of integrated solutions that allow you to obtain a highly professional and functional sterilization area constructed entirely in materials well known for ease of disinfecting and sterilizing 18 10 stainless steel and corian The professional furniture is designed to guarantee the correct flow in the instrument treatment process Ease of disinfecting and sterilization Functionality Design e Resistance Exclusivity 088 37 PROFESSIONAL FURNISHING Ease of disinfecting and sterilization The material single piece work surfaces without any fissures finely satin finished outside and mirror finished inside assure complete disinfection and sterilization Functionality The structures are designed based on modularity strict ergonomic criteria and ease of use Design The design favors functional aspects and distinguishes itself for its thin essential appearance suitable for all dental offices Resistance The sturdiness of stainless steel and expert workmanship offer unparalleled resistance over time Exclusivity The stringent concepts which Smeg Instruments integrated solutions are based on allow structures to be developed that clearly distinguish themselves from the other solutions present on the market 088 39 INTEGRATE SOLUTIONS FOR DENTAL STERILIZATION C
7. compartment and an external chamber form a jacket which saturated steam directly produced by an incorporated steam generator is let into Thanks to this solution it is not necessary to preheat the water and even temperature distribution is assured It is therefore possible to optimize heat exchange and limit condensate formation on the instruments and bagged items thereby speeding up the process improving performance while making the final drying stage more efficient Automatic closure Correct door closure is assured by a motor that automatically starts up when the door is placed against the autoclave Inspectable tanks The loading and unloading tanks assembly con be fully inspected simply take off the cover to access the inside of the compartments In addition two front fittings allow the used water and clean water tanks to be emptied entirely Programmed turn on It is possible to set the turn on time to heat up the sterilization chamber The following items can be set turn on time turn on day repeated or single turn on s d bai a ku EN 13060 Autoclave B One is constructed and engineered to meet the essential requirements of European standard EN 13060 This standard describes the most important sterilization principles for example Classification of loads and sterilization cycles B S and N removal of air from load and steam penetratio
8. 0CM Basic lower trolley for the WD1160 and WD4060 model It holds baskets and supports for surgical instrument treatment WASHING HANDPIECES To meet these specific requirements of injection washing and disinfection of the instruments Smeg has designed and produced accessories D SM6 WD2145 D SM8 WD1160 and WD4060 These accessories enable to wash the outer parts of the instruments and delicately but thoroughly wash the inside ducts by forcing the washing solution into them D SM6 HAND PIECE WASHING SUPPORT Hand piece washing support for WD2145 It is supplied with a standard set consisting of 6 silicone rings 6 filters and 2 nozzles Made of stainless steel D SM8 HAND PIECE WASHING SUPPOR Hand piece washing support for WD1160 and WD4060 It is supplied with a standard Set consisting of 8 silicone rings 8 filters and 6 nozzles Made of stainless steel D SM6 D CS1 HAND PIECE ON TROLLEY Hand piece washing support D SM6 must be positioned on D CS1 trolley as shown in the figure at the side D SM8 CS1 1 HAND PIECE ON TROLLEY Hand piece washing support D SM8 must be positioned on CS1 1 trolley as shown in the figure at the side 088 27 ACCESSORIES SUPPORTS amp BASKETS CSMICRO1 INSTRUMENT BASKET WITH HANDLES AND COVER Suitable for dental instruments 2x2 mm mesh Made of stainless steel Dimensions Ixdxh 240x235x55 mm CSK1 3 INSTRUMENT BASKET WITH HANDLE
9. 1 litre bottles DENTAL AC Liquid acid based neutralizer for stainless steel instruments Package 1 box containing ten 1 litre bottles DENTALNE5 Weak alkaline liquid detergent for delicate washing of handpieces and instruments made of titanium aluminium and stainless steel Package one 5 litre can DENTALAC5 Alkaline detergent powder to wash stainless steel instruments Package one 5 litre can 088 31 UV ULTRASOUND CLEANERS The line of Smeg VU ultrasound cleaner constitutes an extremely useful aid in eliminating residues insoluble in water and represents the ultimate technology in ultrasonic cleaning They are available in different volumes from 3 to 90 It Technology Electronic time and temperature control Electronically controlled adjustable heating stage Efficiency Fast self degassing system to increase washing efficiency Optimization system for multi frequency washing SWEEP function Power efficiency function for extra cleaning effect BOOST function Reliability e Embebbed drain system e Safety disconnect Safety switch off Duration The service life of the apparatus is notably extended thanks to the 38 Khz frequency high performance transducer provided and construction materials employed TECHNICAL DATASHEET SERIE VU TECHNICAL FEATURES VUO3H VUO6H VU13H ULTRASOUND FREQUENCY 38k
10. ENTRALS CLEANING Ultrasound cleaners D STERILIZATION Autoclave WASHING AND DISINFECTION Thermal disinfection washers STERILIZATION CENTRAL Professional furnishings PACKAGING Thermal sealing A FSC www fsc org MIX Paper from responsible sources FSC C016473 This catalogue hos been printed on FSC certified paper Forest Stewardship Council and cellulose produced from forest managed responsible in accordance with strict environmental social and economic tules http www fsc org esgesmeg ese SINE Smeg S p A Via Leonardo da Vinci 4 42016 Guastalla RE Italy E mail instruments smeg it www smeg instruments com SMEG reserves the right to make any changes required for the purposes of product improvement 03 2013
11. Hz 38kHz 38kHz MAXIMUM PEAK ULTRASOUND 320W 600W 800W POWER HEATER POWER 200W 400W 800W TOTAL POWER CONSUMPTION 280W 500W 1000W ULTRASOUND INTENSITY 4 1W cm 2 6W cm 2 6 W cm BOOST YES YES YES SWEEP YES YES YES DEGASIFICATION YES YES YES AUTODEGASIFICATION DIMENSIONS CHAMBER VOLUME 2 75 5 75 12 75 INTERNAL CHAMBER 240x137x100mm 800x151x150mm 800x240x200mm DIMENSIONS x d x h EXTERNAL CHAMBER 300x170x214mm 365x186x264mm 365x278x321mm DIMENSIONS x d x h NET WEIGHT 3 3kg 6 0 kg 7 5kg HANDLE YES YES YES STAINLESS STEEL CHAMBER AISI 304 AISI304 AISI 304 EXTERNAL HOUSING AISI 304 AISI 304 AISI 304 POWER SUPPLY VOLTAGE 230V 50Hz 230V 50Hz 230V 50Hz 088 33 SG THERMAL SEALERS The instruments remain sterile only if the sterilized material is protected in a package that is perfectly airtight and durable in the surrounding environment Smeg Instruments offers two solutions that differ from each other as concerns the sealing system employed a model with impulse sealing and one with rotating sealing Design Space saving compact models in which the materials employed stainless steel and plastic are elegantly combined paying special attention to details Functionality The SGI250 model impulse sealer is able to hold rolls of different widths according to the objects to be bagged The temperature of the heating element is electronically controlled and assures continuous sealing in little t
12. MS STORED 15 CUSTOMISABLE PROGRAMS 6 DISPLAY WITH SEGMENTS AND YES COMMUNICATION LED ICONS TANK INTERNAL TEMPERATURE FROM ROOM TEMPERATURE TO 95 C TEMPERATURE SENSORS IN TANK 2 x PT 1000 CLASS B IEC 60751 DETERGENT DOSING SYSTEM 3 LIQUID PUMPS DETERGENT LEVEL SENSOR YES YES WITH ELECTROMAGNETIC RELEASE AND SAFETY LOCK AUTOMATIC OPENING SAFETY THERMOSTATS DOOR INTERLOCK SAFETY DEVICES TRACEABILITY STORAGE OF DATA FOR 100 MOST RECENTLY RUN PROGRAMS RS232 SERIAL PORT YES FOR PC CONNECTION PRINTER CYCLE STORAGE _ YES WD TRACE EXCEL FORMAT STEEL WASH CHAMBER EXTERNAL PANELS AISI 316L AISI 304 DRYING SYSTEM YES PREFILTER CLASS C 9896 YES AND HEPA FILTER CLASS S 99 999 WATER SUPPLY COLD AND DEMI WATER INLET 60 cm INCORPORATED WATER SOFTNER YES STEAM CONDENSER YES WATER HEATING ELECTRICAL 6 3 Kw ON TRI PHASE 2 3 Kw ON MONO PHASE VERSION EXTERNAL DIMENSIONS WITH TOP EMBEDDED 600 x 605 x 850 830 mm INTERNAL DIMENSIONS 520 x 515 x 545 mm 1 N PE 230V 5 2 3 3 Kw ELECTRICAL POWER SUPPLY 3 N PE 400V 50Hz 7 0 Kw NOISE MAX 50 dB WD2145 WD1160 AND WD4060 CONFIGURATIONS The machine bodies in the WD series must be equipped with carriages and supports most suited to the specific treatment requirements of the different types of instruments supports used in the medical sector The various possible machin
13. S Suitable for dental instruments 5x5 mm mesh Made of stainless steel Dimensions Ixdxh 435x160x50 mm CSMICRO2 AND CSMICROS FINE DRAWN MESH BASKET WITH COVER Suitable for housing rotary cutters and small instruments CSMICRO2 Dimensions Ixdxh 100x80x45 mm Made of stainless steel 4 CSMICRO3 Dimensions Ixdxh 280x168x45 mm CSK2 INSTRUMENT BASKET WITH HANDLES Suitable for dental instruments 5x5 mm mesh Only for the WD1050D model Made of stainless steel Dimensions Ixdxh 450x225x50 mm CSK1 6 BASKET WITH COVER Suitable for various instruments 5x5 mm cover mesh 3x3 mm basket mesh Made of stainless steel Dimensions Ixdxh 130x225x50 mm D CM1 BASKET WITH HANDLES Basket with handles suitable for various instruments 3x3 mm mesh Made of stainless steel Dimensions Ixdxh 300x155x115 mm D SV SUPPORT TO PLACE VARIOUS INSTRUMENTS Support to place various instruments in the vertical position Should be positioned on trolleys D CS1 and D CS2 Made of stainless steel Dimensions Ixdxh 295x160x165 mm D SB2 BASKET SUPPORT Support for two CSMICRO or two CSK1 6 or two IMS half units Should be positioned on the upper trolley D CS1 or CS1 Made of stainless steel Dimensions Ixdxh 415x130x150 mm D SB3 BASKET SUPPORT Support for three CSMICRO1 or three CSK1 6 or three IMS half units Should be positioned on standard lower trolley D CS2 or
14. a light touch is all that is needed to open close the door automatically The only visible parts that have a pleasant colored decoration are the control handpiece and display when the autoclave is running the ergonomically designed handpiece is backlit by a light blue light the same color used in the display Water and energy savings B One absorbs only 1500 watt compared to more than 2000 used in common autoclaves this translates into significant energy savings that allow the dental studio to be more effectively managed allowing simultaneous use of several medical devices In addition B One utilizes approximately 200cc of demineralized water in other words 4 times less compared to the best machines sold on the market remarkable water savings and for those who fill by hand less time is taken to top up the tank Technology Featuring 4 sterilization and 2 test cycles autoclave B One has exceptional autonomy it is able to carry out up to 15 cycles with just one load of water Thanks to the programmed turn on function it is possible to set the time the sterilization chamber is to be preheated and therefore start and use the machine without having to wait In addition B One signals when the demineralization cartridges have to be replaced and as it is equipped with a solenoid valve no other power supply is needed for the purifying device User friendly Easy and intuitive select
15. condenser The steam condenser is a system that quickly vents the saturated steam created when the washing water is heated up and in particular during the thermal disinfection process This device prevents condensate from forming near the instrument washers and exhalation of humidity and odors mainly in solutions in which the apparatus is placed under the counter In addition in air conditioned rooms it reduces the air conditioning system s work load by limiting heat dispersion of the thermal disinfection washers Peristaltic pumps The thermal disinfection washers are equipped with 2 peristaltic pumps one for metering the alkaline detergent during washing while the other is used to meter the acid detergent during the neutralization stage Each pump comes complete with a level sensor to be placed directly in the canisters for the products used Electric locking system The electric locking system prevents the door from being accidentally or forced opened while it is automatically released at the end of the cycle moving it a few centimeters from the tank body to keep condensate formation on the instruments handled down to minimum Printer The importance of tracing the washing and disinfection cycles performed in professional instrument washers is essential for verifying whether the operations executed were successful or not A printer is a necessary accessory as
16. e record keeping and report of the errors Luminous visualization on the selector knob PASSWORD Possibility to insert user password to monitor the process DOOR OPENING CLOSING Automatic HEATING SYSTEM Double chamber with integrated steam generator patented AUXILLIARY FUNCTIONS EXTERNAL PROBES _ Test connection G1 4 as required by the norm UNI EN 13060 SERIAL PORT RS232 Yes possibility to connect an external printer or to acquire data via PC CYCLE RECORDING Yes on internal memory and on SD card HYDRAULIC CONNECTIONS MANUAL FILLING Yes SEMI AUTOMATIC FILLING Yes AUTOMATIC FILLING Possibility to connect the autoclave to a Equipped with demineralised water plant and to an N 4 trays in anodised aluminium automatic drain POWER SUPPLY N 1 SD Card DATA ONE VOLTAGE 230VAC 50Hz N 1 SD reader USB output POWER CONSUMPTION 1500W N 1 stainless steel tray extractor DIMENSIONS N 1 semi automatic filling tube EXTERNAL DIMENSIONS L X D X H 480 x 430 x 600mm N 1 drain pipe CHAMBER CAPACITY 17 Litres NET WEIGHT 62kg 088 13 OPTIONAL AUTOCLAVE B One Tray CSKAA CSKAI The trays are available in 2 versions CSKAA standard aluminum anosided CSKAI in electropolished AISI 304 stainless steel to streamline drying performance WD PRINTER printer The 24 character dot matrix printer with real time clock function comes complete wi
17. e carriage configurations described below are meant as a guide to help you choose the most appropriate solution for the type of instruments supports used WD2145 CONFIGURATION WD1160 AND WD4060 CONFIGURATION UPPER LEVEL UPPER LEVEL D CS1 UPPER TROLLEY WITH CS1 1 TROLLEY WITH support for washing handpieces D SM6 e Support for washing handpieces D SM8 basket D CM1 1 instrument basket CSK1 3 1 basket for CSMICRO2 rotary cutters 1 vertical support D SV LOWER LEVEL LOWER LEVEL D CS2 LOWER TROLLEY WITH CS2 TROLLEY WITH 1 vertical support D SV 1 support D ST10 e 1 instrument basket CSK1 6 1 support D SIMS basket D CM1 088 25 ACCESSORIES BASIC TROLLEYS Basic basket and support holding trolleys for washing surgical instruments used in the operating room They include incorporated sprayers on the upper level and a sprayer on the bottom of the machine lower level Made in stainless steel D CS1 BASIC UPPER TROLLEY 45CM Basic upper trolley with sprayer for the WD2145 model It holds baskets and supports for surgical instrument treatment D CS2 BASIC LOWER TROLLEY 45CM Basic lower trolley for the WD2145 model It holds baskets and supports for surgical instrument treatment CS1 1 BASIC UPPER TROLLEY 60CM Basic upper trolley with sprayer for the WD1160 and WD4060 model It holds baskets and supports for surgical instrument treatment CS2 BASIC LOWER TROLLEY 6
18. ime Both audible and visual signals are given to inform the user the sealing cycle has been completed The SGRO10S model automatic rotating sealer assures sealing at a speed of 10 mt sec with electronic temperature control Safety The sealing process of model SGRO10S satisfies the requirements of standard EN868 4 5 whereas model SGI2590 also meets the requirements of standard DIN 58953 7 Both products are CE certified Care The supreme quality of the stainless steel and plastic materials used for the outside surfaces assure durability and easy cleaning Care operations are reduced to minimum as the components can be easily reached TECHNICAL DATASHEET SGI250 SGR10S TECHNICAL FEATURES TECHNICAL FEATURES SEAL MARGIN SEAL MARGIN 5 35mm SEALING TEMPERATURE Automatic SEALING TEMPERATURE 0 220 C SEALING SEAM WIDTH 8mm SEALING SEAM WIDTH 12mm SEALING SEAM LENGTH MAX 250mm SEALING SEAM LENGTH MAX unlimited SEALING SPEED SEALING SPEED 10m s POWER SUPPLY POWER SUPPLY VOLTAGE 230 50Hz 115 60Hz VOLTAGE 230 50Hz 115 60Hz POWER CONSUMPTION MAX 850W POWER CONSUMPTION MAX 500W TEMPERATURE CONTROL Min O max 9 TEMPERATURE CONTROL electronic DIMENSIONS I x d x h DIMENSIONS I x d x h EXTERNAL DIMENSIONS 420 x 360 x 220mm EXTERNAL DIMENSIONS 500x 260 x 140mm NET WEIGHT 8kg NET WEIGHT 13kg STAINLESS STEEL STAINLESS STEEL EXTERNAL HOUSING AISI304 EXTERNAL
19. ion of all functions thanks to a single turn and push handpiece that is backlit when the machine is operating The top quality display 128x128 pixel is user friendly the operations to be performed are indicated by icons and texts the main operating parameters are displayed and the cycle in progress can be directly monitored thanks to the time pressure chart provided Special audible and visual alert signals let the user know when maintenance operations are required Flexibility and easy maintenance The machine can be filled with demineralized water in the following ways manually connection to a fixed system automatic supply from canisters The loading tank is fitted with a sensor that checks the quality of the water put in The autoclave cover is easily removed to conveniently access the tank which can be fully inspected Compliance to standards Autoclave B One is equipped with a system that recognizes the operator through a password and comes with a memory card capable of automatically saving all information about the sterilization process The documents can be consulted directly on the pc using a USB pen drive In addition the autoclave is equipped with a serial port for connection to a printer so that the saved information can be periodically printed out 88 9 TECHNICAL SPECIFICATIONS Double chamber with incorporated steam generator An instrument loading
20. it can provide a detailed report containing all the information regarding cycles that have already been executed EN15883 The thermal disinfection washers meet standard EN15883 that sets forth the technical requirements in terms of product and process quality assurance which professional grade instrument washers and their accessories must satisfy to assure washing cycles that can be controlled checked and repeated Parameter A The thermal D disinfection washers have a wide range of programs available offering different thermal disinfection solutions and are able to calculate parameter AO in real time The value obtained is shown directly on the display screen and if the printer is present it is stated on the end of cycle report Connection RS232 One of the most important points required by the EN15833 standard is being able to make a complete check of the executed thermal disinfection process using professional instrument washers Therefore the new generation of devices must include the equipment necessary for communicating all executed process information The new generation WD range includes a RS232 output for PC connection This permits all the executed washing and disinfection program information to be downloaded Drying System The forced air g Drying System consisting of an effective hot air generator and powerful blower fan provides extremely efficient a
21. n Critical parameters temperature pressure time test and validation methods of sterilization processes 6 PROGRAMS all dental practices All cycles necessary for process validation according to the m B One has different programs capable of satisfying the needs of sterilisation in norms in force are also foreseen CYCLE TABLE 134 FAST 134 PRION 135 B121 VACUUM B amp D TEST HELIX TEST TEMPERATURE C 134 8 134 8 134 8 121 9 134 8 PRESSURE bar 3 1 3 1 3 1 2 1 0 17 3 1 STERILIZATION 4 4 22 16 3 30 PHASE TIME min DRYING PHASE T 2 ieu 7 i TIME min TOTAL 23 10 38 31 18 18 CLASS CYCLE 134 C bar min e 8 11 TECHNICAL DATASHEET B One Ewe vee TECHNICAL FEATURES Porta tray ELECTRONIC CONTROL Microprocessor CYCLES CC cycles The reversible tray holder constructed 1 Class B 121 C in AISI 304 stainless steel supplied 2 Class 134 C with the autoclave is capable of 3 Fast Cycle at 134 C holding 4 low trays or 3 high ones 4 Special prion cycle Auto Test cycle 1 Vacuum test according to UNI EN 13060 specifications 2 B amp D test and HELIX test INTERFACE Backlit LCD display 128 x 128 pixel push and turn selector knob with luminous indications alarms DIGITAL CLOCK AND DATE Yes possibility to set the switching on time of the autoclave ALARM INDICATIONS Yes process monitored in each phas
22. nd quick drying Air is collected through dual filtering firstly by a class C pre filter with 98 efficiency and then by a class S HEPA absolute filter with 99 99996 efficiency This assures maximum sterility of the blown air on the treated instruments at all times TECHNICAL DATASHEET WD2145 TECHNICAL FEATURES OPTIONAL ELECTRONIC CONTROL MICROPROCESSOR STANDARD PROGRAMS STORED 15 CUSTOMISABLE PROGRAMS 6 DISPLAY WITH SEGMENTS AND COMMUNICATION LED ICONS YES TANK INTERNAL TEMPERATURE FROM ROOM TEMPERATURE TO 95 C TEMPERATURE SENSORS IN TANK 2 X PT 1000 CLASS B IEC 60751 DETERGENT DOSING SYSTEM MAX 2 LIQUID PUMPS DETERGENT LEVEL SENSOR YES SAFETY LOCK YES WITH ELECTROMAGNETIC RELEASE AND AUTOMATIC OPENING SAFETY DEVICES SAFETY THERMOSTATS DOOR INTERLOCK TRACEABILITY STORAGE OF DATA FOR 100 MOST RECENTLY RUN PROGRAMS RS232 SERIAL PORT FOR PC CONNECTION PRINTER YES CYCLE STORAGE YES WD TRACE EXCEL FORMAT STEEL WASH CHAMBER EXTERNAL PANELS AISI 316L AISI 304 WATER SUPPLY COLD WATER INLET 45 cm INCORPORATED WATER SOFTNER YES STEAM CONDENSER YES WATER HEATING ELECTRICAL 3 0kW MAX EXTERNAL DIMENSIONS WITH TOP EMBEDDED 450X650X850 830 MM INTERNAL DIMENSIONS 380X480X590 MM ELECTRICAL POWER SUPPLY 1 N PE 230V 50Hz 3 3 kW NOISE
23. nt level sensors Employing peristaltic pumps for metering assures in accordance with current standards precise measuring of the additives used Safety An electric locking system prevents the door from being accidentally or forced opened while it is automatically released at the end of the cycle moving it a few centimeters away from the tank body This solution assures the instrument handled is almost completely dried Traceability The printer provides a detailed report containing all the information about the completed cycle Thermal disinfection washers manufactured by Smeg Instruments are also equipped with an RS232 output for connection to a PC to download all the information regarding the washing and thermal disinfection programs performed Conformity The new generation thermal disinfection washers manufactured by Smeg Instruments are class lia medical devices constructed in compliance with the technical requirements set forth by standard EN15883 Compact size The compact dimensions of the thermal disinfection washers manufactured by Smeg Instruments allow it to be easily placed in sterilization rooms Model WD2145 single phase is 450 mm wide model WD1160 that works in single phase and three phase is 600 mm wide and model WD4060 that works in single phase and three phase is 600mm wide with drying system included 088 19 TECHNICAL SPECIFICATIONS Steam
24. strument disinfection a complete range of technologically advanced products that meet and exceed the most recent safety standards RELIABILITY MADE IN ITALY Smeg group today has 2000 employees and 11 branches worldwide the excellence of Made in Italy Smeg Instruments has successfully become a renown leader in the market of manufacturers of professional equipment with its unique profile thanks to the supreme quality of its products synonym of innovation design and technology 83 Smeg Instruments offers a range of products that regard the entire instrument sterilization process It is therefore able to supply dental offices all the equipment needed for sterilization from autoclave to thermal disinfection washers from ultrasound tanks to heat sealers up to professional grade stainless steel healthcare furniture INTEGRATE SOLUTIONS FOR DENTAL STERILIZATION CENTRALS CLEANING Ultrasound cleaners page 32 STERILIZATION WASHING AND Autoclave DISINFECTION page 6 Thermal disinfection STERILIZATION washers CENTRAL Professional furnishings page 16 page 36 PACKAGING Thermal sealing page 34 083 5 El Hurt 7 AUTOCLAVE B One Core product of the range of Smeg Instruments for dental studios autoclave B One guarantees outstanding performance thanks to its exclusive patented system that cuts down sterilization times and drastically
25. th thermal paper External electrical connexion needed DEMI One water purifier The water purifier is directly connected to the municipal water line and high quality demineralized water No electrical connections are required as it is directly controlled by the autoclave water gun pressure reducer vessel close system for resins cartridges WD THERMAL DISINFECTION WASHERS A remarkable advantage of thermal disinfection washers is the ability to repeat medical instrument treatment under the same conditions in terms of performance and safety while at the same time preventing the possibility of errors occurring during sterilization cycles Supreme performance reliability cost effectiveness and full safety are just a few of the features that make thermal disinfection washers manufactured by Smeg Instruments unique Technology e Precision Safety Traceability Conformity Compact size 088 17 WHY CHOOSE THERMAL DISINFECTION WASHERS Technology Thermal disinfection washers manufactured by Smeg Instruments are equipped with two temperature sensors Two PT1000 probes placed on the bottom of the washing well permit the temperature to be crosschecked An electronic monitoring system assures that the water temperature never exceeds the maximum allowable values Precision Both models come with two high precision peristaltic pumps and efficie
Download Pdf Manuals
Related Search