PVS15 Personal Viewing System
Contents
1. PVS15 Personal Viewing System Operation and Maintenance Guide CARDIO sage THEATER Important Safety Instructions Always follow basic safety precautions when using this equipment to reduce the chance of injury fire or damage e Read all instructions before installing and using the equipment Follow any labels on the equipment e Use the power adapter provided with the equipment Plug the power adapter into an appropriate grounded power outlet as marked on the equipment Do not use accessory attachments that are not recommended by the manufacturer as such attachments may cause injuries e Position power cables so that they are not walked on or pinched by items placed upon or against them e Make sure that the equipment has adequate ventilation Do not place anything on top of or over the equipment Do not use on a cushioned surface that could block the ventilation openings e Keep the equipment away from water and moisture e Locate the equipment away from sources of heat such as radiators heat registers and stoves Avoid temperature extremes e Avoid dropping anything on or spilling anything inside the equipment because doing so can damage the electronics e Do not attempt to service the unit yourself except to follow the maintenance instructions found in this manual Operation and Maintenance Guide Important Safety Instructions Radio Frequency Interference RFI Federal Communications Commission Par2. altered or defaced Service calls to correct installation of the product or instruct owners on how to use the product Pickup and delivery involved with repairs Any labor costs incurred beyond the applicable labor warranty period The user is cautioned that changes or modifications not expressly approved by the manufacturer of the product could void the user s authority to operate the product 17 Disclaimer and Release The warranties provided herein are the exclusive warranties given by Precor and supersede any prior contrary or additional representations whether oral or written ANY IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW OR OTHERWISE WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN ANY PRODUCT INCLUDING BUT NOT LIMITED TO A ANY OBLIGATION LIABILITY RIGHT CLAIM OR REMEDY IN TORT WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS WHETHER ACTIVE PASSIVE OR IMPUTED AND B ANY OBLIGATION LIABILITY RIGHT CLAIM
3. controller only 1 Press both Volume A and Y buttons simultaneously until the LED begins flashing about 5 seconds The flashing LED indicates that the PVS screen has entered Program Device mode Note While you are in Program Device mode if you do not press a button within 15 seconds the PVS screen will time out and return to normal viewing mode Operation and Maintenance Guide Using the Standalone Controller to Set Up Custom Features 2 Choose one based on what you want to do e To enable this feature specify the desired default channel using the 0 9 buttons on the standalone controller and entering up to three numbers for cable TV mode or two numbers for air TV mode The specified channel appears on the screen Then either wait for the timeout or press a Volume button The standalone controller stores the specified channel in memory as the default e To disable this feature press one of the Volume buttons without pressing any number keys The PVS screen returns to normal viewing mode and the LED stops flashing TV and DVD CD Setup Enable this feature when the PVS screen is connected to a DVD or CD player Then a person can press the Source button on the standalone controller to switch from normal TV mode to the DVD player and watch a movie Or if a CD player is connected a person can press the Audio button and listen to a favorite CD while watching a TV program Only one of these features is available at a t
4. feature is typically used to conserve power and lengthen screen life This procedure uses the standalone controller only 1 Press both Volume A and Y buttons simultaneously until the LED begins flashing about 5 seconds The flashing LED indicates that the PVS screen has entered Program Device mode If nothing happens try pressing both Volume A and VW buttons at the same time again Note While you are in Program Device mode if you do not press a button within 15 seconds the PVS screen will time out and return to normal viewing mode 2 Choose one based on what you want to do e To enable the feature press the Channel A e To disable the feature press the Channel Y As soon as you press a button the PVS screen returns to normal viewing mode and the LED stops flashing Default Channel Setup This feature lets you determine what channel appears when the PVS screen is turned on Your fitness facility can offer an in house channel or special informative channel when the Default Channel feature is enabled With this feature enabled when someone turns off the PVS screen it will go through a specific power down sequence that sets the screen to the desired channel before it turns off Then when the screen is turned on that channel appears When this feature is not enabled the PVS screen just turns off Then when someone turns it on the last channel being viewed will appear on the screen This procedure uses the standalone
5. place the receiver on the neoprene mounting pad or rubber adapter mounts and then attach it to the equipment with the wire ties Use the pliers to tighten the wire ties so the receiver cannot move Important Be sure to secure the receiver so that it cannot move If the receiver moves it may damage the exercise equipment as well as itself and void the Limited Warranty lf you re attached the receiver cut off the excess plastic from the wire ties being careful not to leave any sharp edges on the wire ties Check the rubber boot over the connector to make sure it covers the connector with a tight seal 16 Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR CARDIO THEATER PRODUCT BY USING THE EQUIPMENT YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS Limited Warranty Precor Incorporated Precor warrants all new Cardio Theater products to be free from defects in materials and manufacture for the warranty periods set forth below The warranty periods commence on the invoice date of the original purchase This warranty applies only against defects discovered within the warranty period and extends only to the original purchaser of the product Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only To claim under this warranty the buyer must notify Precor or your autho
6. their defaults Version Shown in the center of the menu this displays the software version of the PVS screen Operation and Maintenance Guide Using the Main Menu Main Menu Setup Second Level Auto Program Information Allows you to select the TV format and run automatic programming to set up channels Manual Program If needed allows you to add and remove a channel Language Shows a list of languages available for this screen Model Lists the TV format for your country 13 Maintenance and Troubleshooting In general the PVS screen and standalone controller require little Checking the Standalone Controller maintenance and will rarely experience problems once installed However you may find the information in this section useful Check the standalone controller often to make sure it is secure and cannot be moved Also make sure that the controller is positioned so This section also explains how to replace the headphone jack when that moisture from people exercising cannot enter through the it no longer provides good audio quality connection and damage the electronics Make sure that the rubber boot around the RJ45 connector is Cleaning the PVS and Controller properly positioned Push the rubber boot firmly into the recess around the connector to ensure a tight seal For the Precor exercise equipment follow the daily cleaning instructions and cautionary statements found in
7. useful as a quick reference Remember these features can only be set up using the standalone controller Table 1 Quick reference to customized features Automatic Power Default Channel TV and DVD CD Action On Off Feature Feature Feature Access Press both Volume Press both Volume Press both Volume feature A and Y buttons A and Y buttons A and Y buttons Enable Press Channel Enter a channel Press Source number then press button Volume Disable Press Channel Y Press Volume W Press Audio button Operation and Maintenance Guide Using the Standalone Controller to Set Up Custom Features 11 Using the Main Menu The PVS screen offers a number of features that are accessible only Table 3 Main Menu from the Main Menu You access the Main Menu using the remote Main Menu Selection Description control Access to this menu and its features should be limited to Picture Allows you to adjust contrast brightness hue facility personnel and other features to improve the quality of the picture shown on the screen While you are in the Main Menu if you do not press a button for a aon 5 m EE EEE T RER oun rovides controls for changing the quality o short period of time the Main Menu disappears and the PVS screen the audio and adjusting audio through the will return to normal viewing mode speakers Table 2 gives an overview of how to use the menu Tab
8. when a person uses the Channel buttons to scroll Move to Memorize and press the SEL button through the available channels channel 127 will not appear 8 Press the Menu button as needed to exit and return to normal Important You will need the remote control to add or delete viewing mode channels The standalone controller does not access the Main Menu so you cannot use it for this procedure While you are in the Main Menu if you do not press a button or complete a sequence after a short period of time the Main Menu disappears and the PVS screen will return to normal viewing mode 1 Make sure the PVS screen is turned on 2 Press the Menu button on the remote control The Main Menu appears on the PVS screen 3 Use the Channel button to move to Setup and then press the SEL button 4 Move to Manual Program using the Channel button and then press the SEL button 5 At Channel use the Volume buttons to select the channel you want to add or delete You could also specify the channel with the number buttons Operation and Maintenance Guide Manually Adding or Deleting Channels 7 Using the Standalone Controller to Set Up Custom Features Cardio Theater has customized a number of features that are commonly used in a fitness facility The customization allows you to easily enable or disable a feature using the standalone controller Use of these features Is optional e Automatic Power On Off feature cau
9. x Your software may be different from that described in this guide Required Tools You will need a remote control CXITVRMT to perform functions on the PVS screen that cannot be done using the standalone controller You may find it useful to have more than one remote control in your facility Contact your Cardio Theater dealer to order one or more remote controls as desired Operation and Maintenance Guide Before You Begin Obtaining Service Do not attempt to service any of the equipment provided in the Cardio Theater PVS system except as described in this guide For information about product operation or service refer to the Cardio Theater web site at www cardiotheater com or contact an authorized Cardio Theater Technical Support Representative at 1 800 776 6695 or service cardiotheater com Representatives are available to serve you from 6 00 am to 5 00 pm Monday through Friday U S A Pacific Time Returning Equipment to Cardio Theater To return equipment to Cardio Theater for any reason you must contact Cardio Theater Technical Support and obtain a return authorization RMA number When requesting the RMA number explain why you are returning the equipment for example you ordered too many controllers and the extra controller can be returned to stock or the equipment needs repairs Important Equipment must be shipped with an RMA number in order for Cardio Theater to process it Any equipment received without an RMA numbe
10. 4 Troubleshooting the PVS ccecsaiccsssdetecsudensraiceeetsestatecderstdenniets 15 Replacing the Headphone Jack csessssseeseeseseeeeaeeaeeees 16 Limited Warranty ssssnssennnnunnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnna 17 3 Before You Begin The Cardio Theater Personal Viewing System PVS adds personalized entertainment to workouts A person steps on the exercise equipment plugs headphones into the jack selects a TV program using the Channel buttons and begins exercising The program appears on a bright full color liquid crystal display LCD directly in front of the person rather than at a distance on the wall Volume buttons on the standalone controller allow a person to change the audio level Depending on how the PVS screen is configured Closed Captioning may appear allowing people to exercise without headphones PVS screen Figure 1 Overview of PVS15 screen and CNTE standalone controller Operation and Maintenance Guide Before You Begin The LED turns on when PVS screen is on and flashes to indicate programming mode Channel buttons let you scroll through the available channels Fitness facilities can add a PVS screen to any Precor exercise equipment using an integrated bracket assembly The bracket assembly allows the PVS screen to be installed conveniently close to people exercising For exercise equipment from other manufacturers fitness facilities can use a stand designed to safely suppor
11. OR REMEDY FOR LOSS OF OR DAMAGE TO ANY PRODUCT This disclaimer and release shall apply even if the express warranty set forth above fails of its essential purpose Exclusive Remedies For any product described above that fails to conform to its warranty Precor will provide at their option one of the following 1 repair 2 replacement or 3 refund of the purchase price Limited Warranty service may be obtained by contacting the authorized dealer from whom you purchased the item Precor compensates Servicers for warranty trips within their normal service area to repair commercial product at the customer s location You may be charged a trip charge outside the service area THESE SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY BREACH OF WARRANTY Operation and Maintenance Guide Limited Warranty EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES PRECOR AND OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY WHETHER ARISING IN CONTRACT INCLUDING WARRANTY TORT INCLUDING ACTIVE PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY OR OTHERWISE FOR DAMAGE TO THE PRODUCT PROPERTY DAMAGE LOSS OF USE REVENUE OR PROFIT COST OF CAPITAL COST OF SUBSTITUTE PRODUCT ADDITIONAL COSTS INCURRED BY BUYER BY WAY OF CORRECTION OR OTHERWISE OR ANY OTHER INCIDENTAL SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER RESULTING FROM NONDELIVERY OR FROM THE USE MISUSE OR INABILITY TO USE THE PRODUCT This exclusion applies ev
12. de Typically you would select the Cable STD mode Operation and Maintenance Guide Initial Search for Channels 7 After selecting the TV format use Channel button to move to Start and then press SEL to begin the automatic search process The search process may take several minutes to finish As it scrolls through the list of channels each channel number appears on the screen When it finds a channel with enough signal strength the color of the channel number changes When the process completes the lowest programmed channel number appears on the screen Note You can stop the automatic programming process at any time by pressing the Menu button Manually Adding or Deleting Channels Sometimes if the signal for a channel is not strong enough the PVS 6 Move to Skip using the Channel button and then change the screen may not catch it during automatic programming Follow these setting as desired using the Volume buttons instructions to add a missed channel or delete an unwanted channel If you want the channel to Then select Deleting an unwanted channel will not keep people from selecting it Appear Off Skip Off if they use the number buttons This process does not block access Not appear On Skip On so it will skip that to that channel For example if you delete channel 127 and a person channel enters 127 with the number buttons that channel will appear on the screen However
13. en if the above warranty fails of its essential purposes and regardless of whether such damages are sought for breach of warranty breach of contract negligence or strict liability in tort or under any other legal theory Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Complete this portion and keep for your records Purchased From Dealer or store name Phone Number Dealer or store telephone number Product Model For example Transmitters Receivers Serial Number The serial number is found on the shipping container or item Effective 30 June 2006 P N CX30037 102 18 Notes Operation and Maintenance Guide 19 Notes Operation and Maintenance Guide 20 Cardio Theater Precor and EFX are registered trademarks and Cardio Theater PVS and Cardio Theater Quick Change Headphone Jack are trademarks of Precor Incorporated Copyright 2006 Precor Incorporated R ii H F A F R www cardiotheater com A Division of Precor Incorporated NOTICE PVS15 OMG CX30438 101 20031 142nd Ave NE Due to continuing advancements in technology Precor Incorporated reserves the right to make changes in Warranty Statement CX30037 102 Woodinville WA USA 98072 4002 hardware packaging and any accompanyin
14. g documentation without prior written notice 06 November 2006
15. ime For example a person cannot watch a movie and listen to a CD at the same time When a person is watching a DVD the CD player option is not available If you enable this feature you might consider enabling the Closed Captioning feature as well This will allow people watching the TV and listening to a CD to better follow the TV programming by reading the text that appears You enable Closed Captioning through the Main Menu using the remote control Refer to Using the Main Menu for more information This procedure uses the standalone controller only 1 Press both Volume A and Y buttons simultaneously until the LED begins flashing about 5 seconds The flashing LED indicates that the PVS has entered Program Device mode Note While you are in Program Devide mode if you do not press a button within 15 seconds the PVS screen will time out and return to normal viewing mode Choose one based on what you want to do e To enable this feature press the Source button on the standalone controller Both Source and Audio buttons can now be used e To disable this feature when no DVD or CD player is connected press the Audio button The PVS screen returns to normal viewing mode and the LED stops flashing Operation and Maintenance Guide Using the Standalone Controller to Set Up Custom Features 10 Quick Reference Once you are familiar with setting up the customized Cardio Theater features you may find the following table
16. lace the headphone jack if necessary Operation and Maintenance Guide Maintenance and Troubleshooting 15 Replacing the Headphone Jack When someone using a controller experiences no sound or poor sound quality such as intermittent sound or crackling you should check the headphone jack Try moving the headphone plug in the headphone jack If the problem continues the jack should be replaced The controller is designed to make changing the headphone jack a quick and easy job one easily done at the facility You will need a Phillips head screwdriver to replace the headphone jack You do not need to disconnect the power cable from the controller to perform this procedure 1 Determine whether or not you need to remove the receiver from its location to access the two screws on the back that hold the headphone Jack 2 If needed cut the two wire ties holding the receiver to the equipment Remove the wire ties from the receiver and toss 3 Remove the two screws at the bottom of the receiver with a Phillips head screwdriver See Figure 2 Remove these two screws Figure 2 Remove screws holding headphone jack Operation and Maintenance Guide Maintenance and Troubleshooting 4 Remove the headphone jack 5 Insert anew headphone jack Insert the two screws and tighten 6 If needed to re attach the receiver insert two wire ties through the holes in the mounting bracket on the back of the controller If needed
17. les 3 and 4 Special Provides access to features such as Closed show the first and second level menus Captioning and Parental Control You can also reset values that have been changed Table 2 How to use the Main Menu such as on the Picture menu If needed use this menu to determine the Action Remote Control software version of screen Move up and down through Use Channel CH and buttons the menu Select an item Press SEL button Change a parameter value Use Volume VOL and buttons Go back to the previous menu Press MENU button level Enter a password Use the number buttons Operation and Maintenance Guide Using the Main Menu 12 Table 4 Second level menu Main Menu Picture Sound Special Second Level Information Color Temperature Contrast Default 75 Brightness Default 65 Color Default 75 Sharpness 80 Tint 0 Equalizer Balance 0 AVL Automatic Volume Level Off Surround Off Blue Back Lets you change the background when there is no signal on a channel Auto Sleep With this feature turned on the screen will automatically switch to standby mode approximately 10 minutes after the TV program ends Childlock N A Caption Displays any captioning provided by the TV programming Parental Control Allows you to block unwanted TV programs based on different ratings Auto On N A Reset Resets any changed values to
18. nnel it may be station trouble Make sure picture coaxial cable is securely connected to its connector on the back of the PVS screen Check for local interference TV program Specify channel using 0 9 keys on the standalone cannot be controller or remote control If necessary rerun the watched Auto Program feature see nitial Search for Channels What to Do No power Make sure the LED is lit on the screen and on the controller Check the power adapter to see if the green LED is lit lf Automatic Power On Off feature is enabled connect head phones to the jack No Closed Make sure Caption is On under the Caption feature in Captioning the Special menu Closed Captioning may not be available on that channel try a different channel Closed A delay between captioning and the actual dialogue is captioning is common in live broadcasts delayed No picture Make sure PVS screen is fully plugged into a power outlet Push the Power button Try a new channel it may be station trouble Turn the PVS screen off and then turn it back on after one minute Poor picture Adjust controls such as Brightness Color and Sharpness under the Picture menu in Main Menu No audio Increase the audio level with the Volume A button Check the headphone jack Replace the headphone jack if necessary Poor audio Re insert the plug into the headphone jack Try moving the plug in the jack to see if the sound improves Rep
19. nt of Communications The PVS does not exceed the Class A limits for radio noise emissions from a digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de la class prescrites dans le R glement sur le brouillage radio lectrique dict par le minist re des Communications du Canada Operation and Maintenance Guide Important Safety Instructions Table of Contents Important Safety Instructions nee 1 Radio Frequency Interference RFI sense 1 Canadian Department of Communications cccceeeeeeeee 2 Before You Begin ssssennennnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nunnana 4 Required Tools Sn iranienne 5 Obtaining Service ua oran sans nul 5 Initial Search for Channels ssusssnnunnnnnnnnnnnnnnnnnnnnunnunnnnnnnnnnnnnn 6 Manually Adding or Deleting Channels mn 7 Using the Standalone Controller to Set Up Custom Features mms 8 Automatic Power On Off Setup cessececeseseseseesseetssseeeseneteaees 8 Default Channel Setup 9 TV and DV DISD Setup fedora maman 10 Q ick R LU nr ne 11 Using the Main Menu mnmnmmnmmnnnnnnnnennnne 12 Operation and Maintenance Guide Table of Contents Maintenance and Troubleshooting mn 14 Cleaning the PVS and Controller sesser 14 Checking the Standalone Controller c sees 1
20. r will be returned to the sender Initial Search for Channels After you install the PVS hardware and all power and cable or antenna connections are completed you can turn on the PVS screen and run the automatic program feature This feature identifies the TV channels that are available After the feature runs the PVS screen displays only those channels that are available Important You will need the remote control to run the automatic program feature The standalone controller does not access the Main Menu so you cannot use it for this procedure While you are in the Main Menu if you do not press a button or complete a sequence after a short period of time the Main Menu disappears and the PVS screen will return to normal viewing mode To exit from any menu screen you can press the Menu button Each press of the Menu button moves you back one menu until you reach normal viewing mode 1 Turn on the PVS screen by pressing the red Power button on the remote control 2 Press the Menu button on the remote control The Main Menu appears on the PVS screen Use the Channel button to move to Setup Press the SEL button to select Setup The Setup menu appears Press the SEL button again to select Auto Program which is already highlighted The Auto Program menu appears with Table highlighted 6 At the Table option select the appropriate TV format mode for the PVS by using the Volume buttons to move to the appropriate mo
21. rized Cardio Theater dealer within 30 days after the date of discovery of any nonconformity and make the affected product available for inspection by Precor or its service representative Cardio Theater product deemed defective by a Cardio Theater representative will be issued a return authorization number Precor will not accept returns without a return authorization number Precor reserves the right at their option to repair or replace the product after verification of defect Product that fails after the warranty period expires will be repaired or replaced at the current part and labor pricing after authorization from the customer Repairs are warranted for 90 days Precor s obligations under this warranty are limited as set forth below Warranty Periods and Coverage Cardio Theater Transmitters 3 Years Parts amp Labor XTV T Wireless or Wired Floor Models XTVFM system transmitter Cardio Theater Receivers 1 Year Parts amp Labor XTV R Wireless or Wired Upper Models XTVFM system receiver Cardio Theater LCD Screen PVS 1 Year Parts amp Labor e Cardio Theater Screen Controllers 1 Year Parts amp Labor Quick Change Headphone Jack 90 Day Parts Only Optional DVD Player 1 Year Parts CT Experience Series Screen PVS1 2 2 Years Parts amp Labor CT Experience Series Screen Controller 2 Years Parts amp Labor CT Experience Series 900 amp 863 Receiver 2 Years Parts amp Labor CT Experience Series Quick Change 90 Days Par
22. ses the PVS screen to turn off automatically when headphones are removed and turn on when headphones are inserted Default Channel feature lets you specify a channel that will appear whenever the screen is turned on You might use this feature if you offer an in house channel e TV and DVD CD feature allows access to a DVD or CD player when one is installed Once the feature is enabled a person can press the Source button on the standalone controller to switch to the DVD player and watch a movie Or with the TV on a person can press the Audio button and listen to a favorite CD while watching a TV program This section provides instructions for setting up each of these features At the end of this section you will find a table that provides a quick reference to the buttons you press Once you are familiar with setting up these features you may find the table is all you need Important You must use the standalone controller to set up these features The remote control accesses the standard PVS features not the customized Cardio Theater features Operation and Maintenance Guide Using the Standalone Controller to Set Up Custom Features Automatic Power On Off Setup The Automatic Power On Off feature turns the PVS screen on automatically when headphones are inserted into the headphone jack At the end of the exercise session when the headphones are disconnected from the jack the screen turns off after approximately 30 seconds This
23. t 15 WARNING To prevent fire or electrical shock do not expose this equipment to rain moisture or excess heat The unit has been tested and found to comply with the limits for Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment The PVS generates uses and can radiate radio frequency energy and if not installed and used in accordance with the assembly installation and maintenance instruction manuals may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If the unit does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into a separate outlet that uses a different circuit than the receiver Consult a Cardio Theater or an experienced radio TV technician for help WARNING Per FCC rules changes or modifications not expressly approved by Cardio Theater could void the user s authority to operate the equipment S y e A D Z V gt TI Z Mi Cc 0 fe r4 N Canadian Departme
24. t the PVS screen and place the stand near the equipment Figure 1 shows the PVS15 screen and CNTE standalone controller The standalone controller is attached during installation it can be attached to the handlebars of almost any exercise equipment except those with handlebars that move Power button turns the screen on and off Volume buttons let you adjust the audio level when using headphones Number keys let you enter specific channel numbers Headphone jack The PVS screen receives power from a DC power block which is plugged into a standard AC power outlet It does not rely on power from the exercise equipment The standalone controller receives power from the PVS screen The coiled power cable is connected to the screen and controller during assembly This guide explains how to set up some custom features on the PVS that the fitness facility might want to use such as Automatic Power On OFF and Default Channel It also lists all of the video setup options available and covers any maintenance requirements For proper operation and maintenance please read this guide thoroughly and follow the instructions For information about installing the PVS and standalone controller on equipment refer to the appropriate integrated bracket assembly instructions To install the PVS on a stand refer to the Personal Viewing System PVS Stand Assembly Instructions Important This guide covers PVS software version 1
25. the Product Owner s Manual Periodically dust the PVS screen with a soft clean cloth CAUTION Do not use liquid cleaners or aerosol cleaners to clean the screen Do not use any solvents such as alcohol and paint thinner or acidic cleaners Each week clean the standalone controller with a mild soap and water solution Lightly dampen a soft clean cloth with the solution and wipe the controller Do not use too much solution on the cloth or spray cleaning solution directly on controllers Doing so could cause moisture to enter through the connector and damage the controller Operation and Maintenance Guide Maintenance and Troubleshooting 14 Troubleshooting the PVS Table 5 may help you to understand and troubleshoot any problems that you encounter with the PVS screen and standalone controller If the suggestions in the table do not help you solve the problems that you encounter please contact Cardio Theater Technical Support Table 5 How to solve most problems What to Do Bars on Try anew channel it may be station trouble Make sure screen video cable is connected to connector on the back of the PVS screen Check for local interference Poor TV Adjust Sharpness under the Picture menu in Main reception Menu Try a new channel it may be station trouble Make sure coaxial cable is securely connected to its connector on the back of the PVS screen Check for local interference Ghosts in Try anew cha
26. ts Only Headphone Jack Operation and Maintenance Guide Limited Warranty Conditions and Restrictions This warranty is valid only in accordance with the conditions set forth below 1 w The warranty applies to the Cardio Theater product only while a it remains in the possession of the original purchaser and proof of purchase is demonstrated b it has not been subjected to accident misuse abuse improper service or mechanical electrical or non Precor modification c claims are made within the warranty period This warranty does not cover damage or product failure caused by electrical wiring not in compliance with electrical codes or Precor owner s manual specifications or failure to provide reasonable and necessary maintenance as outlined in the owner s manual This warranty excludes misuse or failures of for example poor quality CD s multiple discs inserted in the player failures caused by home produced copies of discs etc Except in Canada Precor does not pay labor outside the United States Warranties outside the United States and Canada may vary Please contact your local Dealer for details This Limited Warranty shall not apply to 1 2 3 O Software PROM version upgrades Normal wear and tear consumables and cosmetic items including but not limited to the following labels Repairs performed on Cardio Theater products missing a serial number or with a serial tag that has been
Download Pdf Manuals
Related Search