Home

tps-12g-qm_tps-15g-qm_tps-g-tpi_3.001.0124

1. as follows MANUAL Places the panel in RGB manual mode for that input connector When a new RGB source is obtained nothing happens Any previous RGB settings regardless of whether they were set manually by a previous calibration or by recalling a preset remain in effect note that if the previous source was not RGB the settings may be somewhat strange looking The user may adjust the settings and load or Store presets as desired AUTO Places the panel in RGB auto mode for that input connector and when changing from manual mode performs a calibration Fromthat point on when an RGB source is obtained the panel looks for a matching preset and if one is found the preset is loaded and the Settings applied including color Settings If no matching preset is found the panel performs a calibration In either case the tee user may still adjust the settings and load or store presets as esire PERFORM CALI BRATI ON Regardless of whether in manual or auto mode the panel performs a calibration and applies the settings The reserved joins UPX RGB1_ INPUT CALI B_DEFAULT and UPX RGB2_INPUT_CALIB DEFAULT which were previously used to place the panel in default mode now trigger the perform calibration function Regardless of mode when reserved join UPX RGB1_ INPUT CALI B DEFAULT or UPX RGB2 INPUT CALIB_ DEFAULT is set high and then set back low when calibration completes the panel begins a calibration the NOTE This new
2. procedure no longer automatically stores presets It s up to the user to do this Bug Fixes Addressed several Auto detect issues that did not function properly Addressed Video RGB size position and overscan issues Change behavior so that TPI 12G 15G G TPI mouse cursor does not turn OFF after panel reboot 12g qm tps Ai an t ps g tpi 3 001 0124 ReleaseNotes Fixed mator ommna to set Auto Detec Fixed Percent object in 0 10 ae Fixed Signed timer to not truncate rightmost digit if value is negative Notes Annotation requires a Pad area be defined in the project for the video window Reserved Joins To enable disable annotation ENABLE 19180 DISABLE 19181 default To clear all marks CLEAR 19182 To select the brush width BRUSH THIN 19183 BRUSH MED 19184 default BRUSH THICK 19185 To select the brush color COLOR_RED 19186 default COLOR GREEN 19187 COLOR _ BLUE 19188 COLOR YELLOW 19189 COLOR_ CYAN 19190 COLOR MAGENTA 19191 COLOR_ WHITE 19192 COLOR_ BLACK 19193 COLOR_ERASE 19196 To Freeze Unfreeze the video applies to both sources TELESTRATE FREEZE OFF 19194 default TELESTRATE_FREEZE_ON 19195 The USB host support was initially designed to be limited to USB mice HID protocol only and the following touch panels 3M Microtouch ELO 15 SMART T DT770 WACOM 17 WACOM 21 CINTIQ and LG M3200C from Cybertouch However the current versions of the hardware with a revision of the CPU which has a p
3. projects and similar user projects New Commands FASTLOCK ON OFF Turns fast lock of NTSC PAL sources on or off Bug Fixes Fix array overflow bug with many overlapping subpages made with PNG i mages Fixed bug with remote annotation groups larger than 3 Notes None TPS 12G QM TPS 0 15G QM TPS G TPI Release Notes Version 3 001 2 02 Description This release offers many new features and fixes fromthe last release New Features D Nav Object Support Requires VTPRO e 3 8 and Database 19 6 xxxx Remote Annotation Support 16 Level Alpha Fonts Requires VTPRO e 3 7 and Database 19 1 xxxx Auto Brightness Control Touch on Startup Control Dynamic GFX Aspect ratio enforcement Dynamic GFX Loading Icon Video aspect ratio enforcement Video window user digital feedback join support Page Flip Backbuffer drawing support Ethernet DHCP warning failure messages Ethernet Auto Discovery New test patterns Grid Lines Grayscale Secondary Ethernet Console Updated Indirect Text handler Allows 4000 serial joins Multiple mouse cursor sizes TPI only New Commands ADDPeer Add a PEER entry to the IP table AUTODI scovery Enable disable auto discovery AUTOSPEed Page 3 tps 12g qmtps 15g qmtps g tpi_3 001 0124 ReleaseNotes Auto Brightness Control Transition Speed ANENable Enable disable annotation ANCLear Clear all windows ANCOl or Select pen color ANBRush Select brush wi
4. TPS 12G QM panel only Page 8 tps 12g 15g qmtps g tpi 3 001 0124 ReleaseNotes Special note ee bu T Tor 0015 for the TPS 15G QM panel only Known issues Specific to 1 002 0015 and 1 002 0016 Device extenders not supported Video source auto detect not supported Active state of video object is not supported Possible artifacts in RGB window depending on video object size QM Out not supported Some minor rendering issues with very specific parameters of specific objects 3D Rectangles if very small with thick frames may cause page to not display kan Flash SanDisk Ultra I not supported Touch Out not supported TPS G TPI not supported Page 9
5. dth ANFReeze Enable disable video freeze ANOVERride Enable disable remote override DYNGFxi con Dynamic Graphics Loading Icon settings FONT16 Enable disable support for 16 level alpha fonts KEYLEvel Set Key Backlight Brightness Levels KEYTRi gger Trigger Key Backlight Leve KI LLSOCKET Cancel an active TCP console socket LCDTRi gger Trigger LCD Brightness Leve NTSC443 Enable disable support for NTSC 443 and PAL 60 PAGEFLI P Enable disable page flips using the backbuffer POI NTersize Set the size of the mouse pointer PROCREV Display Processor Revision REMPeer Remove a PEER entry fromthe IP table VI DEO NFO Displays the current video info Generate a report of the Ethernet consoles Changes in Product Behavior Dynamic GFX files load in opposite order Top images load first Touch calibration points are recorded on the release instead of the press The keyclick beep has been replaced with the improved beep Bug Fixes Support es Smart Technologies I D3X0 and DT770 with vendor firmware 12 2007 or earlier TPI only Fixes redrawing of anti aliased text partially PR oa by a subpage Allows server response of 200 instead of 200 OK Fixes Clock stopping bug when closing a e Fixes video windows cutting out when closing subpages Http parses for port number in URL Http Host Port Dir Filename ext Add to Dynamic Graphics the Keep Aspect Ratio Requires VTPRO e 3 7 2 8 and Da
6. eo object with no source connected or source Selected to 0 to have the no video color selected as White and annotation to be used Similar to a White Board Changes in Product Behavior Video objects with no pad areas no longer have annotation data restored over them so long as they do not overlap video objects with pad areas New Commands ANLOCAL turns on off LOCALSMART turns on lo annotation control off ANTI ME Enables and sets a 0 a local smart control the time in seconds before annotation data is auto le k cking of SD video c erased Set to zero to di FASTLOCK Enable fast Bug Fixes Fixed message page being cleared too early during external touch screen conflict message Fixed annotation being restored incorrectly over subpages Fixed partial Dynamic Graphic SMB data transfers corrupting dynamic images Fixed gateway connection failure auto retry when failure occurs during the initial connection Removed unnecessary under draw of subpages on activation while maintaining Subpage z order Fixed crash with DNAV and a serial string that only contains a r is received Notes None Page 2 tps 12g qmtps 15g qmtps g tpi_3 001 0124 ReleaseNotes TPS 12G QM TPS 15G QM TPS G TPI Release Notes June 12 2008 Version 3 001 0032 New Features None Changes in Product Behavior Addressed issue with the new ROHS 12 screens Increased indirect text storage size for large System Builder
7. roduct Behavior LEDs are turned on at start of unit boot eee or setup screens are not displayed until the panel has finished initializing Instead the message Starting System is dis The panel will not run projects not compiled projects complied for a TPS 15G wi Touch screen cal timeout an error is reported on screen and in the error log then the panel returns to the QM presets function like video color presets When autocomp is disabled user settings are applied Option to hide controls on the full screen QM setup page Headphone audio balance controls in setup and from console commands played r for the specific panel type l e not run on a TPS 12G Instead an error message is displayed bration will time out 1 minute after calibration begins On a Page 5 tps 1l2g qm_tps ee at me g tol Foyer eens Project will ae load if Man ile is missing Video if forced to relock A re ng from standby mode Error reported to console Toolbox a the error log when bad firmware is loaded to the panel a RESTORE command now deletes any user project as well as restoring to factory efaults Coldfire processor version is reported in the SHOWHW command fr nd RGB Calibration works differently now There is no longer a DEFAULT button Users should not have to interact with the Video settings as the behavior now works in 99 of all cases If manual control of the RGB Calibration is needed the three buttons behavior is now
8. supported output resolutions 800x600 1024x768 or 1280x768 Device extenders supported QM Output supported Touch Out supported Additions to the Audio setup screen restore defaults button is for the values Shown on that page only Audio hardware initialization you will be able to see display before you can hear Sounds from pane Fixes all known rendering issues Known issues USB not supported PCMCIA Slot not supported Dynamic Graphics not supported Annotation not supported Console access may be blocked during periods of heavy traffic i e flooding the panel with analog joins JNR not supported Video auto detect working may have difficulty switching away from certain component sources RGB Autocalibration not supported Recommend setting Overscan to maximum for all component sources Some artifacts on video display of only certain sources at specific output resolution settings IP Table is not accessible when booting directly to the setup screens The hardkey joins 1 4 are sent over Cresnet even when in the setup screens The feedback for the Hardkeys in the Setup page will show active if your program has any of joins 1 4 active Some limitations of compatible mouse for Mouse Input Kensington mouse fully Supported KEKKKKKKKK KKK KKK KKK KKK KKK KEK KKKKKKK KKK KKKKKKKKKKKK KKK KKK KEK KKK KKK AEKKKKKKKK KEKE Version 1 002 0016 amp version 1 002 0015 Initial releases Special note Use build 1 002 0016 for the
9. tabase 19 0 xx Fixed bug with dynamic graphics not appearing on multi mode buttons Notes Page 4 tps 12g qmtps 15g qmtps g tpi_3 001 0124 ReleaseNotes None Known Issues None TPS 12G QM TPS 15G QM TPS G TPI Release Notes Version 3 000 0026 Description This release offers many new features and fixes fromthe last release New Features DHCP support Dynamic Graphics support HTTP FTP SMB and Compact Flash C or CF0 JNR support Ethernet amp DHCP parameters are now settable fromthe setup screens Video Annotation Including Freeze and erase es Volume and Balance Only visible in Setup when connected always from console Hi Res TPI modes 1152x864 mode 3 1280x1024 mode 4 1366x768 mode 5 Limited USB support See Notes below New Commands el ts returns LCD low med high brightness levels Primary DNS server IP Secondary DNS server V Gas S P N s Primary WNS server IP N mm L e Se l N ets N ets l l INS Set l INS Sets Secondary WINS server IP D ON OFF to enable disable DHCP R W Renew the DHCP settings ore Release current the DHCP IP address ip address 0 0 0 0 and off the net wor HEADBALANCE Sets Headphone L amp R balance O L 100 R HEADVOL Sets Headphone volume 0 100 PROCREV Reports the version of the coldfire processor PAGE OLNTRANSmit Enable disable page join transmission m Geu UO Z200 wou o u L D D W W P E Changes in P
10. tps 12g qmtps 15g qmtps g tpi_3 001 0124 ReleaseNotes TPS 12G QM TPS 15G QM Tee G TP Release Notes June 10 2010 Version 3 001 0124 New Features None Changes in Product Behavior The Fan will run for 5 Seconds when booting up to confirm fan is functional New Commands None Bug Fixes Fixed bugs with DNAV gesture not working on a Sub page Fixed bug with NavList on a sub page drawing poorly Fixed bug where Fullscreen mode ON for a Endless Scrolling on NavLlist would not work Notes None TPS 12G QM TPS 15G QM TPS G TPI Release Notes January 25 2010 Version 3 001 0122 New Features Enhancements to DNAV object behavior and functionality Added new USB driver for Hatteland monitor Changes in Product Behavior New Commands None Bug Fixes None Notes None TPS 12G QM TP G QM TPS G TPI Release Notes 8 December h 01 S 15 t 2008 Version 3 0 0049 New Features None Changes in Product Behavior Page 1 tps 12g qmtps 15g qmtps g tpi 3 001 0124 ReleaseNotes Adjusted Fan behavior for the TPS 17G version New Commands None Bug Fixes None Notes None TPS 12G QM TPS 15G QM TPS G TPI Release Notes October 10 2008 Version 3 001 0048 New Features Support for Local Smart Control See WEB site for Quick Start Guide to this feature Adds new cache to speed up DNAV objects over graphical page backgrounds Whiteboard annotation support This feature allows for a Vid
11. ublished erratum for the PCI bus Since the USB host support relies on the PCI bus a workaround has been built into the firmware which may cause graphics and annotation to draw more slowly when this USB device is connected Crestron is working to get new Hardware to support USB devices fully Please contact Crestron for further information There s a TPSG issue involving horizontal jitter on some RGB resolutions when coming in through 3rd party splitters such as the Altinex Known Issues DTT 18 not supported at this time Page 7 tps 12g qmtps 15g qmtps g tpi_3 001 0124 ReleaseNotes Loading TPI projects for higher than the current resolution may fail and Toolbox will trigger a panel reboot To work around the problem change the TPIMODE to the desired resolution then reboot and load the project If enabling or disabling DHCP or changing any static IP settings fromthe setup Screens there is no notice that a reboot is required Console access can be blocked when running large native animations Workaround is to enter setup via a reboot and touch click on startup KKK KKK KKK KKK KKK KKK KKK KKK KKKKKKKKKKK KKK KKKK KK KKK KKK KK KKK KKK KKK KKK EKKKKKKKK KKK Version 1 002 0021 NOTE Loading this version over an earlier version or downgrading fromthis version to an earlier version will force a restore of factory defaults You will need to recalibrate the touch screen and check all settings Maximum project size is 170MB TPS G TPIl

tps-12g-qm_tps-15g-qm_tps-g-tpi_3.001.0124

Contents

Download Pdf Manuals

Related Search

Related Contents