Quick Start Guide
Contents
1. Schedule Setup Be sure you have already set the date and time for your recorder before setting a recording schedule Day and Night Schedule 1 Click Day Time Start and select the time to start daytime recording as desired 2 Click Day Time End and select the time to end daytime recording as desired 3 Repeat for Night Time Start and Night Time End Weekend Schedule Click Weekend Schedule and select On 2 Click Weekend Start and select the day of the week and the time to start weekend recording 3 Click Weekend End and select the day of the week and the time to stop weekend recording SEARCH BY EVENT You can search video that has been capture based on alarm motion video loss or other pre configured events Right click the Live screen and then click Search 2 Set the appropriate dates and times to start and end your search in the From and End fields respectively 3 Select the type of event you want to search for To search for all recorded events select All 4 Select the appropriate camera channels to search for these events To serch the video from all camera channels select All Click Enter in the Event List field Locate your event in the list and click to view the event Click Replay to start playback at the time of the event To return to the event list click Back to List gor ea D E G To search video from before or after the event click Play You can also search video based on the time of reco2. About this Guide This guide is a quick reference for users to install and operate HDIP video surveillance systems It provides only basic information regarding the network recorders and cameras For further details on installation and operation please refer to the Remote Access Quick Start Guide DDNS Installation and Activation Sheet and User Manual START HERE KO Connect power to your recorder 2 Turn the power on 3 Connect cameras to the recorder O Connect mobile devices 31327AD O0 SI cP Cl ss w Remove the contents of your HDIP packaging Choose a location for your recorder that has adequate air circulation to allow the fans to operate properly Connect your monitor to either the VGA or HDMI port depending on your chosen monitor Connect the mouse included in your packaging to the USB port on the front or back of the recorder Attach the power cord to the port on the back of the recorder and plug it in to a standard household outlet Press the power button on the front of the recorder and hold for three seconds The button will stay lit when the recorder is on Remove the dome cover using the supplied Torx tool Mark the positions of the 2 screw holes on the base of the camera at your chosen location Drill each hole slightly smaller than the supplied screw anchors Insert the anchors into the drilled holes Fasten the camera to the wall or ceiling with the supplied screws Conn
3. T Tet ttt ty nse I See TTTLLLELELLL LLL CLIT ETI ITL rit Reset Switch HDMI Port e SATA Port Power Reset the For a monitor Network Camera Ports Backup to an Plug in your connection to with an HDMI Connect up to 16 external e SATA recorder your cameras connector high definition cameras hard drive Connection LEDs VGA Port Alarmi LAN Network Port USB Port Lit when camera is F Connect to your local Connect a flash or a monitor Connect your 5 connected and with a VGA alam sensos network for remote drive keyboard working properly connection and outputs monitoring or mouse 31327AD
4. cessary cables to your cameras and recorder and turn the recorder on Syam Sece Network USB 2 Right click in the Live screen and then click Menu Set the date time and unit Manage password pro Configure network com Configure camera channel set name export import or reset tection user accounts munication options and tings including camera name 3 Log on as an Admin using the default password 1234 system configurations restart passwords and per setup your recorder for camera settings and Power or shut down the recorder mission settings remote access over Ethernet 4 Click System 5 Click Date Time 6 Click Date and select the appropriate date on the calendar 7 Select Time and use the up and down arrow buttons to set the correct hour and minute 8 Click the screen and then click Yes Schedule Schedule Configure recording quality and resolution set up a recording schedule Alarms Set up how the re corder will respond to alarm events Display settings Change video output Info View hardware version software version and network address info upgrade software view the system log Right Click Menu Non Decoding Mode gt Menu m Mode amp Sequence A Search amp Export a PTZ gt Fast PB 3 EXIT Right click on the Live screen to access the Main Menu and other functions such as Non Decoding Mode Display Mode Sequence Search Export PTZ control Fast Playback or user logou
5. ect the Ethernet cable to the camera Connect the Ethernet cable to the recorder Adjust the camera to the desired angle If desired adjust the camera focus Replace the dome cover Screw the two Torx screws on the side of the dome cover to tightly fasten the cover in place Set up your recorder for remote viewing using the information provided in the Remote Access Quick Start Guide Connect to your recorder over the web using a PC smart phone or tablet NETWORKING CAN BE DIFFICULT Call AvertX Technical Support for a trained professional to walk you through remote connection on your HDIP system 1 855 228 3789 Why Should I Connect a Mouse Using a mouse simplifies the process of setting up the configurations on your recorder Remote Control Once your recorder is configured you can use the remote control to search saved video find alarm events change your recording schedule and cycle through live video Power Over Ethernet The AvertX IP cameras included with this system use Power over Ethernet PoE Both power and video are trasmitted over a single cable simplifying installation and helping you start using your system faster SETTING A RECORDING c70 a 2 8 E Use the Schedule Setup menu to define the start and end times for day night and weekend recording schedules To access Schedule Setup right click in the Live screen and then click Schedule In the Schedule menu click
6. rding For further instructions on Search please refer to the User Manual Copyright 2012 Avertx All rights g reserved Information contained in this AVERT document is subject to change wtihout prior notice AvertX does its best to provide 1 855 2avertX accurate information but cannot be held x i 1 855 228 3789 responsible for typos or mistakes www avertx com AVERT UICK HDD ailea START NETWORK VIDEO U i D E RECORDER AND CAMERAS VIDEO SURVEILLANCE SYSTEM USING THE RECORDER FRONT SOFTWARE MAIN MENU Use the main menu to configure all of the recorder settings schedule recording configure the alarms set up user access network display and system options To access the menu DATE AND TIME SETUP Once your HDIP system is operating you are already recording video Follow these instructions to set the time and date on your recorder For easy navigation you can connect a mouse to a USB port on the recorder For further instructions regarding date and time setup details and configuration see the user manual Power Press and hold this button to turn off the recorder Network Rec Alarm Iluminates when Blinks when Blinks when an recorder is connected video is recording alarm is triggered to the network USB IR Receiver Connect a flash drive Receves signals for backup or a USB from remote keyboard controller right click the Live screen and click Menu 1 Connect the ne
7. t Non Decoding Mode will disble Live video but the HDIP System will continue to record When Non Decoding mode is enabled you can still observe live video using the web viewer or AvertX Go To enable remote access refer to the Remote Access Quick Start Guide included in your packaging Onscreen Menu Bar Click Channel on the Onscreen Menu Bar to choose a channel to view full screen Click Function to choose Main Menu Display Mode Sequence Search Export PTZ control Fast Playback or user logout 9 Select Time Zone and use the arrow buttons to select your appropriate time zone In the United States the Eastern Time Zone is 5 00 the Central Time Zone is 6 00 the Mountain Time Zone is 7 00 and the Pacific Time Zone is 8 00 10 Close Date Time 11 Right click to return to the Main Menu 12 Right click again to return to the Live screen SET UP USER AUTHENTICATION AvertX strongly recomments securing your recorder by setting up user authentication 1 Right click the Live screen and then click Menu 2 Click System and set Basic Advanced Setup Mode to Advanced 3 Click Users 4 Set Password Protection to On The default name and password are as follows Username admin Password 1234 5 Click Account Setup to change admin and user passwords BACK 10 12 14 16 eee0e letwork Camera Ports eooo GATE KAJ 00W Total Max Power eeeee 9 11 13 15 Sa Reset ALARM I O PET T TEE PE
Download Pdf Manuals
Related Search