Avaya 4610SW IP Telephone End User Guide
Contents
1. You cannot dial out using any Speed Dial button You cannot add an entry to the Speed Dial list CALL LOG APPLICATION You cannot dial out after selecting a call log entry You cannot add an entry to the Speed Dial list Dialing from this application does not go through The Call Log is empty WEB ACCESS APPLICATION Pressing the Web softkey does not display a website Dialing from this application does not go through You cannot add an entry to the Speed Dial list OPTIONS No Options other than View IP Settings display Suggested Resolution Verify the procedure and retry Check below to troubleshoot the specific application with which you are working Ensure that any options have not been changed Contact your System Administrator if these actions do not produce the desired result Please refer to the Basic Troubleshooting Chart Verify that all call appearances incoming outgoing lines are not already in use If all lines are in use wait until a line is available to make your call You have 48 Speed Dial entries the maximum allowed You must delete at least one entry before adding a new entry Check that all call appearances incoming outgoing lines are not already in use If all lines are in use wait until a line is available to make your call You have 48 Speed Dial entries the maximum allowed You must delete at least one entry before adding a new entry Your administrator must admini2. sk Right Arrow softkey to move the cursor one space to the right 666 0 Case Softkey 2 to change the o to upper case Symbol Softkey 3 to display the Symbol Character screen Line Feature Button 6 Apostrophe 44 h Case Softkey 2 to change the h to upper case 2 a 77 1 2 a Conventions Conventions Used in the Procedure Descriptions Feature and Feature xxxxx Each of these represents a button that has a feature assigned to it The button is labeled with the feature name sometimes followed by an extension number shown as xxxxx or a person s name LWC CnLWC AutCB Timer Information that is offset represents the display screen The second line appearing on the display will most likely list the features you can access with the softkeys handset tones The tone that appears in curly quotes after a step such as dial tone indicates what you should hear from your handset or speakerphone after successfully performing that step Special Instructions Use the following special instructions for operating your telephone e The first time you use these procedures you will need to customize them for yourself by obtaining the following information from your system manager 4610SW IP Telephone End User Guide 9 Page O CCC Technologies Inc Tha Eonaretg ence Congar a Your system manager may assign call appearances or features to the 10 call appearance feature buttons on your telephone You may also be ab
3. Softkey 3 Displays the Symbol Character screen from which you may select one of the following attributes o Period Line Feature Button 1 Inserts a period at the cursor position o Comma Line Feature Button 2 Inserts a comma at the cursor position In a Number field a comma creates a short pause when the telephone automatically dials that number o Hyphen Line Feature Button 3 Inserts a hyphen at the cursor position o Space Line Feature Button 4 Inserts a blank space at the cursor position o Slash Line Feature Button 5 Inserts a slash at the cursor position o Apostrophe Line Feature Button 6 Inserts an apostrophe at the cursor position Some of the above commands such as Case appear only when there is data in the field in which the cursor is positioned Pressing one of these buttons causes the respective action to be taken at the current cursor position 46108 W IP Telephone End User Guide 8 Page O CCC Technologies Inc Tha Eonaretg ence Congar a Name Entry Example To add a Speed Dial button for Jane O Hara you would typically press the following dialpad number button Right Arrow softkey in sequence 5 J 2 a 66 n 33 e 666 0 44 h 2 a 777 1 2 a After entering the above sequence the display shows Janeohara By incorporating the editing Line Feature buttons and softkeys during entry your actual key press sequence should be 5 J 2 a 66 n 33 e
4. another phone Redirection could be to the extension of a receptionist secretary co worker AUDIX or message center A person who provides coverage is a covering user DEFINITY Communications System Generic 1 and Generic 3 The Avaya switch to which your telephone may be connected Both DEFINITY Communications System Generic 1 and Generic 3 are communications systems which transmit and receive voice and data signals for all communications equipment in a network dial pad The 12 pushbuttons that you use to dial a number and access features enhanced list One of the four types of Abbreviated Dialing lists programmable only by the system manager Contains phone numbers useful to all system members and stores each of those numbers as a 1 2 or 3 digit list item extension A dialing number of 1 to 5 digits assigned to each phone connected to your DEFINITY Communications System Generic 1 or Generic 3 switch feature A special function or service such as Conference Hold Send All Calls etc feature code A dial code of 1 2 or 3 digits that you use to activate or cancel the operation of a feature group list One of the four types of Abbreviated Dialing lists programmable only by the system manager Contains phone numbers useful to members of a specific group and stores each of those numbers as a 2 digit list item handset The handheld part of the telephone that you pick up talk into and listen from This is sometimes called the rec
5. button is now available for automatic dialing To add another Speed Dial button repeat this procedure from Step 2 To exit the Speed Dial application press the Phone Exit C button Note You can position an entry at the beginning of the list out of alphabetical order by placing a space asterisk etc as the first character of the name For example Bruce would be placed before Aaron on the list To add a speed dial button for a website telephone number l Press the AddToSD softkey o The Speed Dial Name Entry screen is displayed to allow you to make a change to the name o The cursor appears to the right of the current name entry 461058 W IP Telephone End User Guide I7 Page O CCC Technologies Inc Tha Benaretg ence Conyers a 2 Ifyou need to change the name use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed Press the Backspace Line Feature button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the name entirely then retype it 3 Press Done o The Speed Dial Number Entry screen displays the prompt Use dialpad to edit Number lt 25 with the cursor positioned at the end of the Number field 4 Ifyou need to change the telephone number use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move to the cursor to the r
6. call from your telephone to another extension or outside number Use when your caller needs to speak further with someone else Call Park Puts a call on hold at your telephone for retrieval at any extension Use when you need to go elsewhere to get information during a call or whenever you wish to complete a call from a different location Also if the call received is for someone else use it to hold the call until the called party can answer it from the nearest available telephone Call Pickup Lets you answer a call at your telephone for another extension in your pickup group Use when you wish to handle a call for a group member who is absent or otherwise unable to answer Note You can use this feature only if you and the called party have been assigned to the same pickup group by your system manager Conference Allows you to conference up to six parties on a call including yourself so that you can conduct a 6 way discussion Use to set up timesaving conferences or to spontaneously include an additional party important to a conversation Call Forwarding All Calls The Call Forwarding feature temporarily forwards all your calls to another extension or to an outside number depending on your system Send All Calls Temporarily sends all your calls to the extension of a person designated by your system manager to answer them when you cannot perhaps a secretary or receptionist Use when you will be away from your desk for awhile or when
7. displayed 3 Press the Edit softkey o The prompt Select entry to edit is displayed 4 Press the Line Feature button corresponding to the button you want to update o The Speed Dial Name Entry screen is displayed with the cursor to the right of the current name entry 5 Edit the field as appropriate Note To change the name use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed To remove the character s press the Backspace button and re enter the character s Or press the Clear Line Feature button to remove the name entirely then retype it Note You can enter up to 13 characters in the Name field 6 After changing the name or to change the number without changing the name press Done o The Speed Dial Number Entry screen is displayed with the prompt Use dialpad to edit Number lt 25 and the cursor positioned at the end ofthe Number field 7 Edit the field as appropriate Note To change the telephone number use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move to the cursor to the right of the character s to be changed To remove the character s press the Backspace button and re enter the character s Or press the Clear Line Feature button to remove the number entirely then retype it The Number field allows up to 24 characters Note Pressing Cancel at any time returns you to the Speed Dial Main sc
8. new entry unless you remove an entry first 5 Press the AddToSD softkey o The Speed Dial Editing screen is displayed to allow you to make a change to the name or number o The prompt Use dialpad to edit Number lt 25 is displayed with the cursor positioned at the end of the Number field 6 Make any needed changes to the telephone number Note Use the Left Arrow softkey and or the Right Arrow softkey to move the cursor to right of the character s to be changed Press the Backspace button to remove that character and re enter the correct character 7 To change the name press the Line Feature button on either side of the Name field to move from the Number to the Name field Note Use the Left Arrow softkey and or the Right Arrow softkey to move the cursor to the right of the character s to be changed Press the Backspace button to remove that character and re enter the correct character 8 Press the Save softkey to save the modified information on that Speed Dial button Note To exit without saving press the Cancel or Delete softkey o The Name Number entry is updated o A Speed Dial buttons are re sorted in alphabetical order by Name o The Speed Dial Main screen is redisplayed 9 To exit the Speed Dial application press the Phone Exit DD o To dial a party using a Speed Dial button Note Automatic dialing of pre stored numbers is the most common method of automatic dialing You can set up Speed Dial buttons and select the pa
9. to another phone Speed Dial Application The Speed Dial application provides access to speed dial buttons which facilitate automatic dialing Use this application to e set up buttons for speed dialing e update speed dial button label information e remove the label from a speed dial button 46108 W IP Telephone End User Guide 6 Page O CCC Technologies Inc Tha Eonaretg ence Congar a Call Log Application Call logs are useful for e tracking who called while you were away from the phone e redialing the number of a previous call you made e obtaining telephone numbers from previous calls The IP telephone also allows you to set up a Speed Dial button for any call listed facilitating dialing of frequently called numbers All calls made to or from your IP telephone are added to one of three Call Logs Outgoing Calls Incoming Answered Calls and Missed unanswered Calls The Missed Call Log displays automatically whenever you access the Call Log application but you can quickly access a different log if desired Each log has a main screen which lists the calls in chronological order newest to oldest and a details screen The main screens provide the Name and Number of the calling or called party if available and a time for the current date or date for calls prior to the current date The details screen displays all this information in a wider format shows what type of call it was and allows you to take certain actions
10. you do not wish to be interrupted by telephone calls Call Log The Call Log application provides three lists each showing up to 15 outgoing incoming answered or missed calls Use this application to call a person directly from the Call Log display or to add a log entry s name and phone number to a speed dial button 4610SW IP Telephone End User Guide 10 Page O CCC Technologies Inc Tha Eenaretg ence Coma prenenag a Priority Calling Allows you to call an extension with a distinctive 3 burst ring to indicate your call requires immediate attention Use when you have important or timely information for someone Reset Phone Reset your IP Telephone when other Troubleshooting suggestions do not correct the problem or after being advised to do so by your System Administrator Note Use a Power Cycle only with the approval of your System Administrator and only when a reset does not resolve the problem Power cycling may cause stored information such as the telephone options and preference settings and Speed Dial lists to be lost Message The Message light goes on when a caller has left a message You can then follow your system manager s local message retrieval procedures to get your message Mute For turning off and then back on again the microphone of the handset or the speakerphone so the other person on the call cannot hear you Speakerphone Allows you to place and answer calls or access other voice features without lift
11. your IP telephone include e redialing a previously called number e speed dialing a number programmed on a Speed Dial button e using an administered Abbreviated Dialing Feature button to initiate a call e dialing a party listed on your Call Log e dialing a party from a web page displayed via the Web Access application Note The IP telephone often receives telephone numbers through the Call Log or Web Access application that are not immediately dialable For example the Call Log may contain an incoming call from the following U S phone number 732 555 1234 In general if you try to dial that number as is the call cannot go through first you have to dial one or more digits to obtain an outside line access your corporate telephone network or add some other code before you can return the call The IP telephone can if appropriately administered automatically dial those extra digits for you So with one touch the telephone automatically dials 91 732 555 1234 Your Telephone Administrator has information on setting up this Enhanced Dialing capability Note If all lines are in use automatic dialing will not work Navigating Application Screens Your IP telephone uses a combination of Phone Feature buttons Line Feature buttons and Softkeys to allow you maximum flexibility in operating the phone and working with its applications Phone Feature buttons are used in the Phone application and appear on the face of the telephone around the dia
12. O CCC Technologies Inc The Eonretgence Compare a HEADSET TRANSFER DEF wah 3 CONFERENCE f MNO u WXYZ Hj 3 Avaya 4610SW IP Telephone End User Guide 4610SW IP Telephone End User Guide 1 Page O CCC Technologies Inc A ls Arden Congar a Table of Contents About YOU TG COMO AA AU O E OI A 3 Telephone DIAM ii Ann o aan a ana 4 Navigating Application SCLCCUS seri Ataca 5 IP Eee piony App CANON as oran an nenas e OAT Ra Pu SN PASAR Ana EE 6 Phone ApplicaHO Ria 6 Speed rat Api an Oh toi A ES 6 CUT TOS AP O OU ias 7 WED ACCESS APPOLON arriva ici 7 W Lelenhone ONL 00S na naat asn an santi 7 Gal App aan CS en ma La an na en aa Mantan Aan an Isa ena ana Ana nasbans NS nn Anna 8 Enter Characters Uas Wie al A an naa em nana ema ama aa RA aa 8 Edun Dara OF Ate Bon nan E en ne On A en ne Ono asn 8 Name Ent Example ena aman stan aaa e ONE RN SA SAM BNN BNN SS ASN Un aa 9 on Mon ana aa at 9 Conventions Used in the Procedure DeSCTiptionS ccoocoocooooooooWoooWooooooooooooooooooooo o 9 ESAS ane nb sasa Hoa 10 A PPP A sa SN Bana 11 TAINS Ga naa A e PSOE ROO O II NN AN 12 E PO E OO 12 PCR care r E E E E E E E EE E E E E E E E E E ER A EER 2 RS OE Ne see sien a Aa 13 AAA SAA A 13 e CAS no o ER o o In BP AE Dana 14 CALOR tt iO UU laca 14 An en 15 AS A AE e OR aman ena Un eat na Ran San Raba estate tases 16 UP A E an aan SAp Pa ECO RI Bi Daan Bana 16 DVIS E PA o ro O a AB ANA Un 16 PEKEMO senantias
13. Release To retrieve a call parked at any extension 1 Dial the Answer Back code 6 dial tone 2 Dial the extension number where the call is parked confirmation tone Note If you receive intercept tone parked call has been disconnected or retrieved by someone else To return to a call parked at your extension 1 Press Call Park or Dial the Answer Back code 6 and then your extension number o You are connected to the call Call Pickup To answer a call placed to your pickup group when your phone is idle Note You can only use this feature if you and the called party have been assigned to the same pickup group by your system manager 1 Press Call Pickup or Dial the Call Pickup code 7 o You are connected to the ringing call To answer a new call while active on another 1 Press Hold o The present call is put on hold o The green light flutters 2 Press Call Pickup 4610SW IP Telephone End User Guide 12 Page O CCC Technologies Inc Tha Eonaretg ence Corn prenenag a o The called telephone stops ringing o You are connected to the incoming call Note To return to the call on hold after completing call pickup press the fluttering call appearance button Conference To add another party to a call 1 Dial the first party 2 Press the Conference LD tion o The line s display area changes to white text with a dark gray background o The current call is placed on hold o The Soft Hold SamMicon is
14. a Daan Ban ea asean ran an sana oa an bani 16 Pe Dn E PD AA AN 17 GI ono A PA IE DAs Ans NBAN MAN BASA Gn 19 one and Mn on an ut Lina 20 RENTO TONES ais 20 Feedback TOUS vovssevcctenecseseasantwacnsacanesdoasenesasss assures ONN ENA EN ENE N E soensesneteesmenoneeusesetens 20 Interpretine Display ICONS ecese rE aneka E E EEEE E EE EE 21 MA A O A e O oO Banana anta BG na 21 Basic Ironbleshooti no CHAT kei asn kanan anon eni emas gobn anai 21 Troubleshooting IP Telephony Applications coooooooooooooocoocoocoocoocooooooooooooooooooooo oooooo o 22 RGIS SEY ias 23 PROCESS OCICS una Ba E sie asacetecee 24 461058 W IP Telephone End User Guide 21 Page O CCC Technologies Inc Tha Eonaretg ence Com prenenag a About Your Telephone The 4610SW IP telephone is an innovative telephone that gives you access to the World Wide Web while offering the latest features and applications The display area allows up to six application specific buttons to be presented and labeled at one time Additionally six Line Feature buttons and four softkeys provide access to powerful capabilities such as e call server based features e speed dialing e aCall Log and e aWML Wireless Markup Language a web development protocol browser The WML browser provides access to websites tailored specifically for devices with smaller display screens like cell phones and Personal Data Assistants In addition to these features and applications the IP telepho
15. all Forward again while on hook or Dial the Call Forward Cancel code 2 confirmation tone Note If you have console permission next dial the extension number whose calls are to be deactivated o Your calls will now ring at your own telephone 4610SW IP Telephone End User Guide 13 Page O CCC Technologies Inc Tha Eonaretg ence Corgans a Send All Calls Note At a station where an EAS agent is logged in this feature will direct calls placed to the station extension on to the station s coverage path Calls to the EAS agent login ID are sent to the EAS agent login ID coverage path To send all calls except priority calls to coverage 1 Press Send All Calls while on hook or Dial the Send All Calls code 3 confirmation tone Note You may hear a ring ping tone from your telephone as each call is forwarded To cancel Send All Calls 1 Press Send All Calls again while on hook or Dial the Send All Calls Cancel code 3 confirmation tone Call Log To scroll through a Call Log of more than six entries using the scroll buttons 1 Use the Scroll buttons at the bottom left of the screen as follows If you want to scroll downward one screen six entries at a time press the Page Right button If you want to scroll upward one screen six entries at a time press the Page Left button To view a call log 1 Access the Call Log application by pressing the Log softkey o The Missed Call Log Main screen displays the Call
16. buttons take up half the display width The half width display area allows more Line Feature buttons per screen With half width call appearances only the Line Feature buttons on the appropriate left or right side of the button can be used to select that call appearance Any call associated messages for that call appearance show on the top display line Entering Characters Using the Dialpad Use the dialpad keys 0 through 9 and to enter characters in a Name or Number field To select a field press the Line Feature button on either side of the field to which you want to move When entering a Name the first press of a dialpad key displays the first alphabetic character associated with that key to the right of the current cursor position This character is shown in lower case and the cursor does not move A subsequent press of the same key replaces the character shown with the next alphabetic character assigned to that key still in upper case or the number assigned to that key if all three alphabetic characters have been displayed For example pressing the 2 on your dialpad displays the letter A Pressing the 2 key again replaces the A with a B pressing it again replaces the B with a C and pressing it again replaces the C with a 2 Pressing it again redisplays the letter A and so on Pressing a different key moves the cursor one position to the right and displays the first alphabetic character associated with that key All letters a
17. display area changes to white text with a dark gray background o The Hold nsmaicon is displayed To retrieve the held call 1 Press the Line Feature button on which the call is being held or Press the Hold SS o The call is now active 461058 W IP Telephone End User Guide 11 Page O CCC Technologies Inc Tha Eonaretg ence Coryn a Transfer To send a call to another telephone 1 With the call active or with only one held call and no active calls press the Transfer lt gt button o The call is placed on hold o The Hold Masllicon is displayed dial tone o The next available line activates 2 Dial the number to which you want to transfer the call 3 If you wish to wait for an answer and announce the call remain on the line and announce the call Note If the line is busy orif no one answers return to the held call by pressing the Line Feature button on which it is being held 4 Press the Transfer gt button again o The call is sent to the extension or number you dialed o Atwo second display message indicates the transfer is complete 5 Hang up your handset Call Park To park a call for retrieval from any extension Note If Call Park has been assigned to your telephone simply press Call Park then press Release otherwise follow the instructions below 1 Press Transfer dial tone 2 Dial the Call Park code 6 confirmation tone 3 Press Transfer again o The call is parked 4 Press
18. display that Call Log 3 Press the Delete All softkey o The prompt Press Delete again to confirm is displayed Note To cancel the deletion without removing all of this Call Log s entries press Cancel No deletion occurs and the Call Log s Main screen is displayed 4 To complete the deletion of all entries for this Call Log press Delete o The entries are removed o The Call Log s Main screen is displayed 5 To exit the Call Log application press the Phone Exit DY o To delete a single call log entry Note You can delete a single Call Log entry or all entries on a specific Call Log 1 Access the Call Log application by pressing the Log softkey o The Missed Calls Main screen is displayed 2 Ifthe entry to be deleted is not shown use the Page Left and or Page Right buttons to scroll through the Missed Calls Log or press the softkey for that entry s Call Log Outgo InAns 3 With the entry to be deleted displayed press the Line Feature button corresponding to that entry o The selected entry s Detail screen is displayed 4 Press the Delete softkey o The prompt Press Delete again to confirm is displayed at the top of the screen Note To cancel the deletion without removing this Call Log entry press Cancel No deletion occurs and the Call Log s Main screen is displayed 5 To complete deleting this Call Log entry press Delete o The entry is removed o The remaining entries on this Call Log remain sorted in chronological orde
19. displayed dial tone 3 Dial the number of the next party and wait for an answer 4 Press the Conference QD 0000 again to add the new party to the call 5 Repeat Steps 2 4 for each party you want to conference in to the call To add a held call to the current call 1 Press the Conference LD tion o The icon on the current line changes to the Soft Hold Wesicon 2 Press the Line Feature button of the held call 3 Press the Conference O again o All parties are now connected To drop the last person added to the call 1 Press the Drop QD on o The last party connected to the conference call is dropped from the call Call Forwarding All Calls To temporarily redirect all calls Note Calls to an EAS agent login ID extension cannot be forwarded Also with EAS if calls need to be forwarded for the station you are logged into forwarding must be done before you actually log in 1 Press Call Forward or Dial the Call Forward code 2 dial tone Note If you have console permission and are not forwarding your own calls dial the extension number whose calls are to be forwarded You will receive dial tone 2 Dial the extension or phone number where calls are to be sent confirmation tone Note Some telephones have restrictions on where calls can be forwarded see your system manager 3 Press Release Note You may hear a ring ping tone from your telephone as each call is forwarded To cancel Call Forwarding 1 Press C
20. ecific buttons in the Call Log or other applications For example pressing a Line Feature button in the Call Log application selects the corresponding entry allowing you to take further action with your selection When you enter text on a screen for example labeling a Speed Dial button several Line Feature buttons provide editing features like backspacing or hyphenation Here is an example of the difference between a Line Feature button s functionality in the Phone application versus other applications To call someone from the Phone application the default display screen you press the first Line Feature call appearance button and dial your party But in the Call Log application pressing the first Line Feature button selects highlights the first call log entry and displays detail information about that call In addition to the call related icons and features the icons and background display colors are associated with certain administrable features on the call server and may appear on the display Several features such as flash wink and flutter are associated with Call Center operations and might not apply to many IP telephone users Icon Description Condition Feature Button Display Background Color None Feature is on active Light Gray None Feature is off inactive Light Gray None Feature denied Broken Flutter This is a temporary condition accompanied by an error Light Gray beep the first time 1t occurs This condition t
21. eiver message retriever A person authorized by the system manager to retrieve messages for other users off hook When the handset is removed from the cradle for example when you lift the handset to place or answer a call or speaker is on on hook When the handset is left on the cradle and speaker is off party A person who places or answers a call personal list One of the four types of Abbreviated Dialing lists programmable by the system manager or by you the user Contains phone numbers of your choice and stores each of them as a single digit list item personal list item One of the 10 available slots on an Abbreviated Dialing personal list T he first nine personal list items are given digits 1 to 9 with 0 for the tenth item pickup group A group of telephone users who can answer calls for each other through the Call Pickup feature Group members are determined by the system manager and are usually located in the same work area or perform similar job functions 4610SW IP Telephone End User Guide 23 Page O CCC Technologies Inc Tha Eonaretg ence Corparseng e priority call An important or urgent call that sends a special 3 burst ring program reprogram To use your dial pad to assign a phone number to a personal list item or an AD xxxxx button for Abbreviated Dialing retrieve To collect phone messages with the Message or Voice Message Retrieval features Also with Call Park to resume a call from a
22. elated to this problem Contact your LAN Administrator with as complete a description of the problem as possible Check that both the handset and line cords into the phone are securely connected 4610SW IP Telephone End User Guide 21 Page O CCC Technologies Inc Fe Eenaretg ence Congar a Phone does not ring A feature does not work as indicated in this guide for example the Redial button doesn t operate as described All other IP Phone problems Note that there might be a slight operational delay if you unplug and reconnect the phone Reset or power cycle the phone with your System Administrator s assistance Contact your System Administrator if the above steps do not produce the desired result Use the Up Down Volume keys to set your ringer volume to a higher level From another phone place a call to your extension to test this suggested solution Verify the procedure and retry For certain features you must lift the handset first or place the phone off hook Contact your System Administrator if the above action does not produce the desired result Your telephone system might have been specially programmed for certain features applicable only to your installation Contact your System Administrator Troubleshooting IP Telephony Applications Problem Symptom GENERAL A feature does not work as indicated in this guide or does not work as it had previously worked PHONE APPLICATION SPEED DIAL APPLICATION
23. eld Use the dialpad to enter the name of the person being added to a Speed Dial button Note You can enter up to 13 characters Note To return to the Speed Dial Main screen without adding a name press Cancel After completing the Name field press Done o The Speed Dial Number Entry screen is displayed with the prompt Use dialpad to edit Number lt 25 Use the dialpad to enter the telephone number of the person for whom you are adding the Speed Dial button Note Use up to 24 characters and the Symbol softkey to insert appropriate spaces hyphens slashes etc in the number being entered Note Include any trunk number s needed to obtain an outside line Verify that the Name and Number entered are correct Note To change an entry use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed Press the Backspace Line Feature Button to remove that character and re enter that character Alternately to erase a field entirely select that field by pressing the Clear Line Feature button you can then enter new data in the cleared field When the Name and Number are correct press the Save softkey to add the information to a Speed Dial button Note To exit without saving press the Cancel softkey o The Name Number entry is added to the Speed Dial list in alphabetical order by Name o The Speed Dial Main screen is redisplayed allowing you to verify that the new
24. er procedural messages Four grayscale colors indicate phone application activity Line Feature buttons W Six Line Feature buttons provide both call appearances lines for incoming and outgoing calls and application specific functionality other call related features that are provided with your telephone system or administered by your System Administrator in the Phone application Line Feature buttons also serve as application specific buttons in other applications such as the Call Log Softkeys gt Used to navigate to or start application specific actions such as Call a number Cancel the current activity Save entered data and Store a speed dial label Phone Exit LP Displays the Phone application main screen or if applicable exits the current call server based feature and normalizes the display Options 2 Displays the first Options main screen from which display and application settings can be updated Page Right Left O Shifts from one page to another in the same application when the display presents the paging indicator These buttons have no effect when the Paging Indicator is not displayed Speaker LED Indicator Lights steadily when the Speakerphone is active Speaker AUD Accesses the Speakerphone feature Headset LED Indicator Lights steadily when the headset is active Ti dre With a headset connected changes audio control from the handset or speaker to t
25. er s name number and time date of the first six unanswered calls Note All Call Log screens have the same fields characteristics and softkeys 2 To review the outgoing calls you made press the Outgo softkey o The Outgoing Calls Main screen is displayed To review the calls you received and answered press the InAns softkey o The Answered Calls Main screen is displayed To review the missed calls press the Missed softkey o The Missed Calls Main screen is displayed To see detailed information about a call press the Line Feature button to the left or right of that entry o The appropriate Detail screen is displayed To return to the Call Log Main screen from a Detail screen press the Return softkey To call a party from the Call Log Note Your IP telephone maintains a log of up to 45 outgoing incoming answered and incoming unanswered calls to from your phone Each log can have up to 15 calls 1 Press the Log softkey at the bottom of the display area o The first three missed calls display one name number per button and the prompt Select entry for details appears at the top of the display area 2 Ifthe party you want to call is in a Call Log other than the one for Missed calls press the softkey that represents the Call Log where that entry appears either Outgo or InAns o The selected Call Log is displayed 3 If the party you want to call appears proceed to Step 4 If the party you want to call is not displayed press the Pa
26. familiar with your IP telephone s display you will recognize the icons or symbols associated with the state of a call or the state of the phone This chart provides an overview of the icons you might see Check with your System Administrator to verify if the descriptions are accurate for your system Icon Meaning No Icon Displayed Idle Indicates the line is available l Indicates the line is in use Active Tr On Hold Indicates a call is on hold on this line Ringing Indicates an incoming call is arriving on this line TF Soft Hold Indicates this line s call was put on hold pending a conference or a transfer Troubleshooting Basic Troubleshooting Chart Problem Symptom Suggested Solution Phone does not activate after connecting it the first time Phone does not activate after a power interruption Phone worked earlier but does not currently seem to work Display shows an error informational message Speakerphone does not operate Characters do not appear on the Display screen Audio quality is poor specifically you hear an echo while using a handset static sudden silences gaps in speech clipped or garbled speech etc No dial tone Unless your System Administrator has already initialized your telephone you might experience a delay of several minutes before it becomes operational Upon plug in your telephone immediately begins downloading its operational software its IP address and any special features
27. fter the first display by default 1n lower case Repeat this key press entry process to enter the rest of the party s name And you can use the Left Arrow mand Right Arrow softkeys to move the cursor to the left or right respectively When entering a telephone number in the Number field your IP telephone recognizes a key press as a numeral or typographic character such as or and automatically moves the cursor to the right Note You can enter text while on a call however you automatically exit text entry mode if you go off hook either via the headset handset or by a fixed button like Transfer Also you automatically exit text entry mode if you cause another screen to display for example by pressing Save or Cancel or pressing the y button Editing During or After Entry Editing commands display below the Name or Number field next to certain Line Feature buttons The commands and their actions are e Backspace Line Feature Button 3 Deletes the character to the immediate left of the cursor e Clear Line Feature Button 6 Removes all characters from the field in which the cursor currently resides e Case Softkey 2 Changes the character to the right of the cursor from lower case to upper case or vice versa depending upon its original case Note that when entering a name the first character entered is initially displayed in upper case with subsequent characters initially displayed in lower case letters e Symbol
28. ge Right button to display the next page of entries Continue until the number party you want is displayed You can also press the Page Left Y button to display the preceding page of entries 4 Press the Line Feature button associated with the name number of the person you want to call o The associated Call Detail screen is displayed 5 Select Call o The phone goes off hook o The selected party s number is dialed 4610SW IP Telephone End User Guide 14 Page O CCC Technologies Inc Tha Eonaretg ence Corn prenenag a o Ifthe Phone Screen on Calling option is set to Yes the Phone application screen is displayed o A Call Log entry 1s created for this call Note If your administrator has set up the Enhanced Dialing feature selecting Call causes the IP telephone to automatically add any appropriate digits such as those required to get an outside line to phone numbers in the Missed and InAns Call Logs If you press Call but the call does not go through check with your Telephone Administrator to ensure that the Enhanced Dialing feature is set up properly for your environment 6 Proceed with the call as usual To delete all entries from a call log 1 Access the Call Log application by pressing the Log softkey o The Missed Calls Main screen is displayed 2 If you want to clear the Incoming Answered Calls Log press the InAns softkey to display that Call Log If you want to clear the Outgoing Calls Log press the Outgo softkey to
29. he headset Indicator Lights steadily when the handset headset or Speakerphone is muted Turns off the active Speakerphone handset or headset microphone to prevent the other person from hearing you 4610SW IP Telephone End User Guide 4 Page O CCC Technologies Inc Tha Eenaretg ence Congar e 14 Volume Control Adjusts the handset speaker headset or ringer volume depending on which item is in use When you increase or decrease the volume the top display area shows an icon to indicate the item for which you are adjusting the volume A visual volume meter that shows the volume level follows the icon This button also controls the volume of the key click sounds Key clicks sound when you press fixed buttons on the phone such as the dialpad or softkeys 15 Headset Jack Provides a port for connecting a headset on the underside of the phone 16 Hold gt Red button used to place a call on hold 17 Transfer YD Transfers a call to another phone 18 Conference Dp Sets up conference calls with more than one other person 19 Drop lt Drops the last person added to a Conference call or ends the current call if you are not on a Conference call 20 Redial ED Redials the last number dialed from the phone or displays a list of the last three numbers dialed for selection Set using the Options button 21 Numeric Dialing Pad Standard 12 button pad for dialing phone numbers Automatic dialing abilities using
30. hen changes to the off inactive state None Idle Indicates a call appearance line is available White A Ringing Indicates an incoming call is arriving on this line White Active Indicates the line is in use Light Gray Ss On Hold Indicates a call is on hold on this line Dark Gray P Soft Hold Indicates this line s call was put on hold pending a conference or a transfer Dark Gray ap Flash Used for Call Center operations Light Gray Flutter Used for Call Center operations Light Gray 7 Wink Used for Call Center operations Light Gray Four softkeys appear directly below the display area They allow you to access the other IP telephone applications In an application they allow you to perform application specific functions like add save edit delete or cancel The labels above the softkeys reflect their function relative only to that specific screen IP Telephony Applications Y our IP telephone provides four applications Phone Speed Dial Call Log and Web Access Additionally use the Options function to define settings personalize your phone and troubleshoot certain functions All applications appear in the display area accessed by the softkeys appearing below the display A brief description of each application follows Phone Application The Phone application is the primary application Use this application to make and receive calls and perform call handling operations like conference calling or transferring calls
31. ight of the character s to be changed Press the Backspace button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the number entirely then retype it Note Pressing Cancel at any time returns you to the Speed Dial Main screen without updating the label 5 Press the Save softkey to update the Speed Dial button o The Name Number entry is added to an available Speed Dial button o All Speed Dial buttons are re sorted in alphabetical order by Name o The Speed Dial Main screen is redisplayed 6 To exit the Speed Dial application press the Phone Exit GP o or select another application if applicable To add a call log entry to a speed dial button 1 Access the Call Log application by pressing the Log softkey o The Missed Calls Main screen is displayed 2 Ifthe party for whom you want to create a Speed Dial button is listed on the Missed Calls Log proceed to Step 4 3 Ifthe Missed Call Log does not list the party for whom you want to create a Speed Dial button press the softkey for that entry s Call Log Outgo InAns o The Outgoing or Incoming Answered Call Log Main screen is displayed as applicable 4 Press the Line Feature button to the left of the party for which you want to create a Speed Dial button o The Detail screen for that entry is displayed Note If the AddToSD softkey is not displayed you have the maximum number 48 of Speed Dial buttons labeled and cannot add a
32. ing the handset When you press Shift when on hook and then Speaker the built in speakerphone performs a test of the surrounding acoustic environment by using a sequence of tones When the tones stop your speakerphone has finished adjusting itself for optimal performance It is now ready for use See Reset Speakerphone Use the built in speakerphone any time you prefer hands free communication both speaking and listening or for group conference situations Note Your telephone has either the Speaker listen only or the Speakerphone listen and speak feature Check with your system manager to see how your telephone is administered Speed Dial Screen Allows you to store up to 104 speed dial entries in your personal telephone directory for quick dialing access to those numbers Redial Depending on how you have set up your Redial option selecting Redial automatically dials the most recent number dialed or displays a list of the last three outgoing calls for selection of the number to be dialed Both procedures follow Your Telephone Administrator can turn off the Redial feature or can restrict your phone to dialing only the last number dialed If the Redial feature is turned off pressing the Redial button generates an error tone If the Redial feature is restricted to only the last number dialed follow the instructions below for Redialing the Last Number Called Hold To place a call on hold 1 Press the Hold BO to o The line s
33. le to use up to 12 other features accessed with the softkeys and display control buttons These features are in addition to the features that are administered on the call appearance feature buttons on your telephone Check with your system manager to see which softkey features are available to you You may also be able to use the Speakerphone or the Speaker feature Check with your system manager to see what other features you can use with your switch Any feature not appearing on a button or accessed with the display and softkeys can be activated or canceled by dialing a 1 2 or 3 digit feature access code Ask your system manager for the feature access codes for the features you need e To operate a feature you must have the handset off hook removed from the cradle of the telephone or the speaker or speakerphone on unless otherwise noted e Ifyou receive an intercept tone high pitched alternating high and low tone while attempting to operate any feature you have taken too much time to complete a procedural step or have made a dialing error Hang up get dial tone and return to Step 1 Feature Finder Hold Puts a call on hold until you can return to it While a call is on hold you can place another call activate another feature answer a waiting call or leave your telephone to perform another task Use when you have a call you do not wish to drop but which you have to interrupt briefly to do something else Transfer Transfers a
34. lpad Phone buttons have an icon on the top of the button to indicate the button s function These buttons provide mostly call handling features like Transfer Conference Hold or Redial Two additional phone feature buttons available on the IP telephone are e Phone Exit lt gt used to exit call server based features and restore the Phone screen to the display and e Options OD to access the Options function to set certain phone parameters and view phone server connection status and other information for troubleshooting The Page Right and Page Left buttons qb between the Phone Exit and Options buttons are also considered phone buttons Use them to move forward Right Arrow or backward Left Arrow from one display screen to another These paging buttons work in conjunction with the paging indicators you may see on an application screen Paging indicators show that a screen has more than one page and allow you to navigate forward and back through those additional pages To activate the function or feature represented by a phone button simply press the appropriate button Line Feature buttons appear on both sides of the display area These buttons provide call appearances Lines and other call related features as administered by your System Administrator in the Phone application They also serve as application 461058 W IP Telephone End User Guide 5 Page O CCC Technologies Inc Tha Eonaretg ence Corparseng a sp
35. mber dialed is automatically redialed To redial using a list of the last three numbers called 1 Press the Redial He Feature button O O The Redial screen displays the last three unique numbers dialed The prompt Select number to dial appears at the top of the display 2 Press the Line Feature button associated with the number you want to redial O O If the call can be dialed the Phone application screen displays and the selected number dials automatically If the selected number cannot be dialed for example 1f all call appearance lines are currently on Hold all Redial entries are disabled If you press a number for redialing while in this state an error beep tone sounds and no further action occurs 3 Proceed with the call e A Call Log entry is created for this call Tones and Their Meanings The tables below describe the defaults for each ringing and feedback tone Check with your system manager to verify if the descriptions in the Meaning column are accurate for your system Ringing Tones are produced by an incoming call Rings l ring 2 rings 3 rings ring ping half ring Ringing Tones Meaning A call from another extension A call from outside or from the attendant A priority call from another extension or from an Automatic Callback call you placed A call redirected from your telephone to another because Send All Calls or Call Forwarding All Calls is active Feedback tones are those which
36. n extension other than the one where the call was first placed or received ringer The device that produces the electronic ringing sound in your telephone stored number A phone number that has been programmed and stored as a 1 2 or 3 digit list item for use with Abbreviated Dialing It can be a complete or partial phone number an extension number or a trunk or feature code Once programmed a number can be accessed by first dialing the list then the list item digit s under which it is stored if the number is stored on an AD xxxxx button the number can be accessed by simply pressing that button switch The device that makes connections for all voice and data calls for a network and also contains software for features Also known as a system switching system or ECS Enterprise Communications Server system list One of the four types of Abbreviated Dialing lists programmable only by the system manager Contains phone numbers helpful to all system users and stores each of those numbers as a 2 digit list item system manager The person responsible for specifying and managing the operation of features for all the voice and data equipment in your network trunk A telecommunications channel between your switch and the local or long distance calling network Trunks of the same kind connecting to the same end points are assigned to the same trunk group trunk code A dial code of 1 2 or 3 digits that you dial to access a trunk gro
37. ne activates 2 Place or answer the call or Access the selected feature 3 Ifneeded adjust the speaker volume by pressing the Volume Control gt GSD button until you reach the desired volume level o As you press the Volume Control button the top display area shows the volume level 4610SW IP Telephone End User Guide 16 Page O CCC Technologies Inc Tha Convvtge ALE Congar a To change from the speakerphone to the handset or headset l Pick up the handset or Activate the headset o The Speaker indicator next to the Speaker button goes off and audio control reverts to the handset or headset as applicable To turn the speaker off during a call l Lift the handset or activate the headset at any time o The Speaker and the corresponding indicator light turn off o Voice control reverts to the handset headset To turn the speaker on during a call l Press the Speaker ED on o The Speaker indicator next to the Speaker button lights o The Speaker is now operational To end a call while the speaker is active l Press the Speaker button o The Speaker and the corresponding indicator light turn off o The call terminates Speed Dial To add a speed dial button l 2 3 Access the Speed Dial application by pressing the SpDial softkey o The Speed Dial Main screen is displayed Press the Add softkey o The Speed Dial Name Entry screen is displayed with a cursor in the Name fi
38. ne provides a robust menu of options to customize your phone preferences Your IP telephone s display area coincides with how your System Administrator sets up the Line Feature buttons On the phone itself these features provide ease of use and flexibility e 4 softkeys which assist you in using the IP telephone s applications and features e 14 standard labeled buttons which assist in IP telephone operation and call handling e a built in two way speakerphone You can also attach the IP telephone to an adjustable stand to optimize your viewing position 4610SW IP Telephone End User Guide 31 Page CCC Technologies Inc The Eonretgence Compare a Telephone Diagram This diagram illustrates the face of the IP telephone and contains numbered callouts which identify the phone s primary features and buttons Headset Mute LED Mute AVAYA S E un oo ToT z4 a b JJ Message Waiting Lamp SEP When lit indicates you have a message waiting on your voice messaging system This indicator can also be optioned to flash for incoming calls Display When the phone is idle the top area displays the current date and time When someone is calling you the name phone number of that person displays in the top area The display has five lines Three lines are devoted to the current application One line shows softkey labels for the current application and the top line shows Help and oth
39. ompts Restart phone no H yes 4 If you want to restart the phone press 5 If you want to terminate the restart and restore the phone to its previous state press Note If the above reset procedure cannot be performed or does not solve the problem and your System Administrator approves the phone may be power cycled To power cycle the phone 1 Unplug the phone then plug it back in o The phone reconnects to the server and reinitializes everything Note It may take a few minutes before the phone can be used again Message To retrieve a message 1 See your system manager for instructions regarding your local message retrieval procedures Note If the stutter dial tone Audible Message Waiting feature is not presently administered for your station request that your system manager do the necessary administration Mute To prevent the other person on the line from hearing you 1 Press the Mute ED o The other party cannot hear you The indicator next to the Mute button lights when Mute is active To reinstate two way conversation 1 Press the Mute UD again o The other party can hear you again o The indicator next to the Mute button turns off Speakerphone To place or answer a call without lifting the handset or to use the Speakerphone with any feature 1 Press the Speaker button o The indicator next to the Speaker button lights and the speaker handles voice control The first available call appearance li
40. programmed by your System Administrator from the server to which it is connected Report any delay of more than 10 minutes to your System Administrator Allow a few minutes for re initialization after unplugging powering down the phone server problems or other power interruption causes Contact your System Administrator Most messages involve server phone interaction If you cannot resolve the problem based on the message received contact your System Administrator for resolution Ask your System Administrator if your Speakerphone was disabled See Phone does not activate after connecting it the first time Check all lines into the phone to ensure that it is properly connected Check the power source to ensure that your telephone is receiving power Perform the following Test procedure with the telephone idle on hook press and release the Mute button then press the following numbers on the dialpad 8 3 7 8 which stands for TEST The display should indicate the self test has started then report 1f the test was successful or failed If nothing appears on the display and the phone is receiving power your phone may need to be replaced If these suggested solutions do not resolve the problem reset or power cycle the phone with your System Administrator s assistance Various potential network problems may be causing the problem Access the Network Audio Quality screen to provide your System Administrator with specific information r
41. r o The Call Log s Main screen is displayed 6 To exit the Call Log application press the Phone Exit GP our Priority Calling To place a priority call Press Priority or Dial the Priority Calling code 1 dial tone 2 Dial the extension Note If your call is not answered and you wish to redirect it to coverage press Go to Cover while the call is ringing To change a regular call into a priority call 1 Press Priority 2 Wait for the called party to answer Note If you still receive a call waiting ringback tone wait a few minutes and try again 461058 W IP Telephone End User Guide 15 Page O CCC Technologies Inc Tha Eonaretg ence Corgans a Reset Phone To reset the IP phone Note Restarting of the telephone may take a few minutes 1 Press the Mute button 2 Using the dial pad press the following keys in sequence 73738 o The display shows the message Reset values no yes 3 If you want to reset the phone without resetting any assigned values press asterisk o The display prompts Restart phone no yes If you want to reset the phone and any previously assigned programmed values press the pound key Note Use this option only if your phone has programmed static values o The display shows the message Resetting values while your conference phone resets its programmed values such as the IP address to its default values and re establishes the connection to the server o The display pr
42. reen without updating the label 8 When the Name and or Number have been updated press the Save softkey to update the Speed Dial button o The Name Number entry is updated and all Speed Dial buttons are re sorted in alphabetical order by Name o The Speed Dial Main screen is redisplayed 9 To update another Speed Dial button repeat this procedure from Step 2 10 To exit the Speed Dial application press the Phone Exit button To delete a Speed Dial button label 1 Access the Speed Dial application by pressing the SpDial softkey o The Speed Dial Main screen is displayed 2 Use the Page Left and or Page Right buttons as appropriate until the entry you want to delete is displayed 3 Press the Delete softkey o The prompt Select label to delete is displayed 4 Press the Line Feature button corresponding to the button you want to remove o The Speed Dial Deletion screen displays the prompt Press Delete again to confirm Note If you want to cancel the deletion without removing this Speed Dial button press Cancel 5 To finish deleting this Speed Dial button press Delete o The label is removed o The remaining Speed Dial buttons are re sorted by Name o The Speed Dial Main screen displays the page from which the entry was removed To redial the last number called 1 Press the Redial Feature button 461058 W IP Telephone End User Guide 19 Page O CCC Technologies Inc Fe Eenaretg ence oryan a O The last nu
43. rty you want to call by pressing that button Because the IP telephone s advanced capabilities allow up to 48 speed dial entries speed dialing as described here is convenient and efficient 1 Press the SpDial softkey at the bottom of the display screen o The first six Speed Dial buttons display one name number per button and the prompt Select entry to dial appears at the top of the display area 461058 W IP Telephone End User Guide 18 Page O CCC Technologies Inc Tha Benaretg ence Corn prenenag a 2 Ifthe party you want to call appears on the display proceed to Step 3 If the party you want to call is not shown press the Page Right button to display the next page of entries Continue until the number party you want is displayed You can also press the Page Left button to display the preceding page of entries 3 Press the Line Feature button associated with the name number of the person you want to call o The number of the selected person dials automatically 4 Pick up the handset activate the headset or use the Speakerphone to proceed with the call 5 Hang up the handset deactivate the headset or press the Speakerphone ED to end the call To change the name or number associated with a Speed Dial button 1 Access the Speed Dial application by pressing the SpDial softkey o The Speed Dial Main screen is displayed 2 Use the Page Left and or Page Right buttons as appropriate until the entry you want to update is
44. ster settings for the Enhanced Dialing feature beyond the defaults Many events can clear the Call Log including power failures restarting the telephone after logging off etc Check with your LAN Administrator to determine if the web server is not operating if there are network connectivity problems or other network problems Your administrator must administer settings for the Enhanced Dialing feature beyond the defaults You have 48 Speed Dial entries the maximum allowed You must delete at least one entry before adding a new entry Your administrator has turned off all user settable options 4610SW IP Telephone End User Guide 22 Page O CCC Technologies Inc Tha Eonaretg ence Conyers e Glossary activate To begin or turn on the operation of a feature attendant The person who handles incoming and outgoing calls at the main console AUDIX Audio Information Exchange an optional voice mail and message service that provides coverage for calls to you by recording callers messages and reporting Leave Word Calling messages call appearance button A button used exclusively to place receive or hold calls It has an assigned extension number and is equipped with a red in use light and a green status light console permission The authorization from your system manager to initiate Call Forwarding All Calls for an extension other than your own coverage Automatic redirection of calls from an unanswered phone to
45. up to place an outside call Access Codes Feature Code Answer Back 6 Call Forward es Call Forward Cancel 2 Call Park 6 Call Pickup l Priority Calling l Send All Calls ies Send All Calls Cancel 3 4610SW IP Telephone End User Guide 24 Page
46. with that entry Each Call Log can contain a maximum of 15 entries When a log contains more than three entries Page Right and Page Left buttons are available to help you scroll through the log three entries at a time Calls are listed in order from top to bottom the most recent call first Web Access Application One of the exciting aspects of the IP telephone is its optional Web Access application You can actually use your telephone to access your Corporate intranet and the World Wide Web Your System Administrator can optionally design a Home page on which your web options reside or using a Home page provided by Avaya for this purpose For security purposes your System Administrator can also optionally require that an authentication screen display upon selection of the Web Access application In this case you must submit a User Name and Password before gaining access to the Home and other web pages sites Note that the Web Access application offers a basic browser capability The application does not support all Internet data types nor is it intended to replace your PC s browser The IP telephone s web functions are geared towards use on a small three line display screen more like those of a Personal Data Assistant PDA or cellular telephone The functions you can perform in the Web Access Application include e accessing and navigating pages linked to the Home page e entering text on applicable web pages e setting up a Speed Dial entr
47. y for a name and associated telephone number found on applicable websites Because your System Administrator can customize the Web Access application for specific business use not all features described in this section may apply Other features which result from customizing may not be described here For this reason contact your System Administrator for specific information about your Web Access application before proceeding Because customizing may affect the flow of web related activity this document only describes the primary web screen types Depending on how your Web Access application is administered you might have to provide identification before gaining access to web pages If you do not know your User ID or Password contact your System Administrator for assistance IP Telephone Options Access the Options function using the Options OD below and to the right of the display area Using Options menus you set certain phone parameters such as display area contrast how you want the Redial button to work when you want your saved information backed up or restored the language you want displayed or how you want your Feature buttons labeled You can also view telephone status screens for troubleshooting or information purposes 46108 W IP Telephone End User Guide 7 Page O CCC Technologies Inc Tha Eonaretg ence Com prenenag a Call Appearances In the Phone application both call appearance lines and administered feature
48. you hear through the handset headset or the speaker Tones busy call waiting ringback confirmation coverage dial intercept time out recall dial reorder ringback Feedback Tones Meaning A low pitched tone repeated 60 times a minute indicates the number dialed is in use A ringback tone with lower pitched signal at the end indicates the extension call is busy and the called party has been given a call waiting tone If you hear this tone you may wish to activate Automatic Callback Three short bursts of tone indicates a feature activation or cancellation has been accepted One short burst of tone indicates your call will be sent to another extension to be answered by a covering user A continuous tone indicates dialing can begin An alternating high and low tone indicates a dialing error a denial of the service requested or a failure to dial within a preset interval usually 10 seconds after lifting the handset or dialing the previous digit Three short bursts of tone followed by a steady dial tone indicates the feature request has been accepted and dialing can begin A fast busy tone repeated 120 times a minute indicates all trunks are busy A low pitched tone repeated 15 times a minute indicates the number dialed is being rung 4610SW IP Telephone End User Guide 20 Page O CCC Technologies Inc Fe Eonaretg ene Com prenenag a Interpreting Display Icons As you become more
Download Pdf Manuals
Related Search