Home

Avaya 4610 - IT Services

1. Using the Speed Dial Application describes how to set up update and remove labels from speed dial buttons Calling using a speed dial button is covered in Using Your 4610SW IP Telephone Call Log Application The Call Log application provides three lists each showing up to 15 outgoing incoming answered or missed calls Use this application to call a person directly from the Call Log display or to add a log entry s name and phone number to a speed dial button Using the Call Log Application covers log viewing deleting log entries and adding a Call Log entry to a speed dial button Making a call from the Call Log is covered in Using Your 4610SW IP Telephone Issue 2 0 December 2003 Introducing Your 4610SW IP Telephone 4610SW IP Telephone Applications a a Web Access Application Optional The Web Access application allows you to access web pages reachable through links from a Home page and connected pages This application is optional and is specifically administered by your System Administrator Depending on the Home page links available you may browse Corporate intranet sites or browse the World Wide Web Using the Web Access Application covers navigating web access screens and pages and provides information about entering text on web pages Making a call from the Web Access application is covered in Using Your 4610SW IP Telephone 4610SW Telephone Options Access the Options function using the Opti
2. CALL LOG APPLICATION You cannot dial out after selecting a Call log entry You cannot add an entry to the Speed Dial list Dialing from this application does not go through The Call Log is empty Verify the procedure and retry Check below to troubleshoot the specific application with which you are working Ensure that any options have not been changed Contact your System Administrator if these actions do not produce the desired result Please review the previous section Basic Troubleshooting Chart Verify that all call appearances incoming outgoing lines are not already in use If all lines are in use wait until a line is available to make your call You have 48 Speed Dial entries the maximum allowed You must delete at least one entry before adding a new entry Check that all call appearances incoming outgoing lines are not already in use If all lines are in use wait until a line is available to make your call You have 48 Speed Dial entries the maximum allowed You must delete at least one entry before adding a new entry Your administrator must administer settings for the Enhanced Dialing feature beyond the defaults Many events can clear the Call Log including power failures restarting the telephone after logging off etc Issue 2 0 December 2003 8 7 Troubleshooting 4610SW Applications Troubleshooting 4610SW Applications Telephone Management and Troubleshooting Problem Symptom S
3. Contact your System Administrator for assistance or additional troubleshooting information 8 4 Issue 2 0 December 2003 Telephone Management and Troubleshooting Basic Troubleshooting Chart Basic Troubleshooting Chart Problem Symptom Suggested Solution Phone does not activate after connecting it the first time Phone does not activate after a power interruption Phone worked earlier but does not currently seem to work Display shows an error informational message Speakerphone does not operate Characters do not appear on the Display screen Unless your System Administrator has already initialized your telephone you might experience a delay of several minutes before it becomes operational Upon plug in your telephone immediately begins downloading its operational software its IP address and any special features programmed by your System Administrator from the server to which it is connected Report any delay of more than 10 minutes to your System Administrator Allow a few minutes for re initialization after unplugging powering down the phone server problems or other power interruption causes Contact your System Administrator Most messages involve server phone interaction If you cannot resolve the problem based on the message received contact your System Administrator for resolution Ask your System Administrator if your Speakerphone was disabled See Phone does not activate after connec
4. NOTE These symbols precede additional information about a topic gt NOTES Typographic Conventions This guide uses the following typographic conventions Document Blue underlined type indicates a section or sub section in this document containing additional information about a topic Document Italic type enclosed in quotes indicates a reference to an external document or a specific chapter section of an external document italics Italic type indicates the result of an action you take or a system response in step by step procedures Conference In step by step procedures words shown in bold represent a single telephone button that should be pressed selected Related Documentation Training This guide and other related documentation is available online at the following URL http www avaya com support For a quick reference to 4610SW IP Telephone features and applications see the 4610SW IP Telephone Quick Reference Document Number 16 300004 For information related to installing an IP Telephone see the 4600 Series IP Telephone Installation Guide Document Number 555 233 128 For information on desk wall mounting the 4610SW see 4670SW IP Telephone Stand Instructions Document Number 555 233 165 For information related to maintaining an IP Telephone System on a Local Area Network see the 4600 Series IP Telephone LAN Administrator s Guide Document Number 555 233 507 Standard t
5. solutions specific to a 4610SW application Phone Speed Dial Call Log or Web Access Resetting or power cycling your phone when Basic Troubleshooting does not resolve a problem Additionally Chapter 6 describes several status screens to use to troubleshoot certain problems as requested by your System Administrator For all other IP Telephone questions or problems contact your System Administrator Issue 2 0 December 2003 8 1 Interpreting Ringer Tones Interpreting Ringer Tones Telephone Management and Troubleshooting As you become more familiar with your IP Telephone you will recognize the various tones you hear in response to an incoming call or while using the handset The chart below provides an overview of the tones you hear Check with your System Administrator to verify if the descriptions are accurate for your system Ringing Tones accompany an incoming call Feedback Tones are those which you hear through the handset receiver or the speaker gt NOTE The PBX not the telephone generates these tones which can differ from this list This difference is especially true when the PBX is outside the United States Ringing Incoming Tones Meaning Half Ring ring ping Feedback Handset Tones Call from another extension Call from outside or the System Administrator Priority call from another extension or from an Automatic Callback call you placed A call is being redirected from
6. 15 Setting the Automatic Backup Option 6 13 Setting the Call Timers Display 6 5 Setting the Message Display Rate 6 6 Setting the Phone Screen on Answer Option 6 4 Setting the Phone Screen on Calling Option 6 5 Setting the Redial Option 6 4 Setting Visual Alerting 6 6 Softkeys 1 4 1 7 Speaker button 1 4 Speaker LED Indicator 1 4 Speakerphone Changing from the handset or headset to the Speakerphone 2 9 Changing from the Speakerphone to the handset or headset 2 9 Ending a call while the Speaker is active 2 9 Turning the Speaker off during a call 2 9 Turning the Speaker on during a call 2 9 Speakerphone feature 2 8 Speed Dial Application 1 8 Troubleshooting 8 7 Using the 3 1 Speed Dial Button Adding a 3 4 Adding a Call Log Entry to a 4 4 Adding for a Website Telephone Number 5 7 Deleting a Label 3 7 Dialing a party using a 2 4 Updating Label Information 3 5 Issue 2 0 December 2003 IN 3 4610SW IP Telephone Speed Dial Screens Using the Speed Dial Application 3 1 Editing During or After Entry 3 2 Using the Web Access Application 5 1 Entering Characters Using the Dialpad 3 1 Using Your 4610SW IP Telephone 2 1 Entering Data on 3 1 Status Screen Viewing Options 6 7 V T Viewing a Call Log 4 3 Viewing the Network Audio Quality 6 8 Telephone Button Feature Descriptions 1 4 Visual Alerting Setting 6 6 Telephone Lights and Display Testing the 8 4 Voice Mail Message Retrieving a 2 10 Telephone Management and Troubleshooting 8 1
7. 2003 Introducing Your 4610SW IP Telephone The 4610SW IP Telephone Table 1 1 4610SW IP Telephone Button Feature Descriptions Continued Callout Button Feature Button Feature Number Name Description 11 Headset With a headset connected changes audio control from Cn the handset or speaker to the headset 12 Mute LED Lights steadily when the handset headset or Indicator Speakerphone is muted 13 Mute Turns off the active Speakerphone handset or headset microphone to prevent the other person from hearing D you 14 Volume Control Adjusts the handset speaker headset or ringer volume gt depending on which item is in use When you increase or lt gt decrease the volume the top display area shows an icon to indicate the item for which you are adjusting the D volume A visual volume meter that shows the volume SD level follows the icon This button also controls the volume of the key click sounds Key clicks sound when you press fixed buttons on the phone such as the dialpad or softkeys 15 Headset Jack Provides a port for connecting a headset on the underside of the phone 16 Hold Red button used to place a call on hold gt 17 Transfer Transfers a call to another phone Pad 18 Conference Sets up conference calls with more than one other person 19 Drop Drops the last person added to a Conference call or ends gt the current call if you are not on a Conference call 20 Redial Redials the last number d
8. Arrow softkey to move the cursor to right of the character s to be changed Press the Backspace button to remove that character and re enter the correct character To change the name press the Line Feature button on either side of the Name field to move from the Number to the Name field Use the Left Arrow softkey and or the Right Arrow softkey to move the cursor to the right of the character s to be changed Press the Backspace button to remove that character and re enter the correct character After you update the Name and or Number press the Save softkey to add the information to a Speed Dial button Press the Cancel or Delete softkey to exit without saving The Name Number entry is updated and all Speed Dial buttons are re sorted in alphabetical order by Name The Speed Dial Main screen re displays To exit the Speed Dial application press the Phone Exit CD button December 2003 Using the Call Log Application Deleting Call Log Entries Deleting Call Log Entries You can delete a single Call Log entry or all entries on a specific Call Log Deleting a Single Call Log Entry 1 Access the Call Log application by pressing the Log softkey The Missed Calls Main screen displays If the entry to be deleted is shown proceed to Step 3 If the entry to be deleted is not shown use the Page Left and or Page Right buttons to scroll through the Missed Calls Log or press softkey for that ent
9. Main screen are as follows Application Options provides access to allow you to set the Redial option set the Phone screen display upon answering or calling options set the display of Call Timers set the rate at which messages display across the top of the screen and set Visual Alerting flashing message light on incoming calls View IP Settings provides access to the View Status Main screen 1 from which you may view IP Address information status quality of service audio and signaling status and interfaces status and the View Status Main screen 2 from which you may view miscellaneous phone status data Network Audio Quality provides access to the Audio Status screen 1 on which you can troubleshoot received coding packet loss and packetization delay and the Audio Status screen 2 on which you can troubleshoot network delay and audio quality Note that this option displays only when you are on a call The three options categories displayed on the second Options Main screen are Contrast Control provides access to the Contrast Option screen on which you adjust the 4610SW s display area contrast Feature Button Labeling allows you to customize a label on a Feature Button if desired Log off allows you to log the phone off for privacy and security purposes Issue 2 0 December 2003 4610SW IP Telephone Options Application Options a The three options on the third Options Main
10. agent subcontractor or is not working on your company s behalf Whereas a malicious party is anyone including someone who may be otherwise authorized who accesses your telecommunications equipment with either malicious or mischievous intent Such intrusions may be either to through synchronous time multiplexed and or circuit based or asynchronous character message or packet based equipment or interfaces for reasons of Utilization of capabilities special to the accessed equipment Theft such as of intellectual property financial assets or toll facility access Eavesdropping privacy invasions to humans Mischief troubling but apparently innocuous tampering Harm such as harmful tampering data loss or alteration regardless of motive or intent Be aware that there may be a risk of unauthorized intrusions associated with your system and or its networked equipment Also realize that if such an intrusion should occur it could result in a variety of losses to your company including but not limited to human data privacy intellectual property material assets financial resources labor costs and or legal costs Responsibility for Your Company s Telecommunications Security The final responsibility for securing both this system and its networked equipment rests with you Avaya s customer system administrator your telecommunications peers and your managers Base the fulfillment of your responsibility on
11. authority to operate this equipment Product Safety Standards This product complies with and conforms to the following international Product Safety standards as applicable Safety of Information Technology Equipment IEC 60950 3rd Edition including all relevant national deviations as listed in Compliance with IEC for Electrical Equipment IECEE CB 96A Safety of Information Technology Equipment CAN CSA C22 2 No 60950 00 UL 60950 3rd Edition One or more of the following Mexican national standards as applicable NOM 001 SCFI 1993 NOM SCFI 016 1993 NOM 019 SCFI 1998 Electromagnetic Compatibility EMC Standards This product complies with and conforms to the following international EMC standards and all relevant national deviations Limits and Methods of Measurement of Radio Interference of Information Technology Equipment CISPR 22 1997 and EN55022 1998 Information Technology Equipment Immunity Characteristics Limits and Methods of Measurement CISPR 24 1997 and EN55024 1998 including e Electrostatic Discharge ESD IEC 61000 4 2 e Radiated Immunity IEC 61000 4 3 e Electrical Fast Transient IEC 61000 4 4 Lightning Effects IEC 61000 4 5 e Conducted Immunity IEC 61000 4 6 Federal Communications Commission Statement Part 15 Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the IFCC Rules These limits are designed to provid
12. how to use your new 4610SW IP Telephone The 4610SW is simple to use while offering the latest advances in telephony systems IP Internet Protocol telephones obtain their operational characteristics from your central telephone server rather than residing in the phone unit itself Updates and new features are downloaded to your phone without intervention or the need for phone replacement This guide contains eight chapters geared to how you actually use the phone each of which is described in the section titled Document Organization Intended Audience This document is intended for IP telephone users who have a 4610SW IP Telephone It is not intended to be a technical reference guide for System Administrators or phone technicians Issue Date This document was issued for the first time in December 2003 Issue 2 0 December 2003 xi How to Use This Document How to Use This Document About This Guide This guide is organized to help you find topics in a logical manner Read it from start to finish to get a thorough understanding of how to use your 4610SW IP Telephone Or use the Table of Contents or Index to locate information specific to a task or function you want to perform Document Organization xii This guide contains the following chapters Chapter 1 Introducing Your 4610SW IP Telephone Chapter 2 Using Your 4610SW IP Telephone Chapter 3 Using the Speed Dial Application Chapter 4 Using t
13. in the text entry field Then Press the appropriate application specific softkey for example Submit or Save Note Application specific softkeys are determined by the application developer therefore the method of saving entered text is subject to the application s design Press the Mode softkey until ALPHA upper case or alpha lower case displays as appropriate Then use the dialpad to select the characters you want to appear in that case Mode alpha displays all characters entered in lower case and is the default mode Mode ALPHA displays characters in upper case Pressing the softkey toggles from one mode to the next Press the Mode softkey until Num displays then use the dialpad to select the appropriate number s Press the Mode softkey until Symbol displays If the desired symbol is not currently displayed press the More softkey to view additional symbols To insert a symbol press the Line Feature button to the right left of the desired symbol as appropriate Issue 2 0 December 2003 5 5 Entering Text on Web Pages De 5 6 Using the Web Access Application Entering Characters Using the Dialpad Use the dialpad keys 0 through 9 and to enter characters in a text entry field line When entering a name or other alphabetic text the first press of a dialpad key displays the first alphabetic character associated with that key to the right of the current cursor position This character is
14. may be required to take corrective actions COREL PRA ES BRS ERMA VCCI OF CES TFA APR CH COREA RERE CHEATS BK GELNSRIOFLLBHVEF COBIAN RES SZELIBRENAZLEBHVETF To order copies of this and other documents Call Avaya Publications Center Voice 1 800 457 1235 or 1 207 866 6701 FAX 1 800 457 1764 or 1 207 626 7269 Write Globalware Solutions 200 Ward Hill Avenue Haverhill MA 01835 USA Attention Avaya Account Management E mail totalware gwsmail com For the most current versions of documentation go to the Avaya support Web site http www avaya com support Contents About This Guide Overview xi a Intended Audience xi a Issue Date xi a How to Use This Document xii Document Organization xii Conventions Used xiii Symbolic Conventions xiii Typographic Conventions xiii a Related Documentation Training xiii es 1 Introducing Your 4610SW IP Telephone a Introduction 1 1 The 4610SW IP Telephone 1 1 a Navigating Application Screens 1 6 4610SW IP Telephone Applications 1 8 Phone Application 1 8 Speed Dial Application 1 8 Call Log Application 1 8 Web Access Application Optional 1 9 4610SW Telephone Options 1 9 Issue 2 0 December 2003 v Contents 2 Using Your 4610SW IP Telephone m Introduction 2 1 Call Appearances 2 1 a Making Calls 2 2 Manual Dialing 2 2 Automatic Dialing 2 3 Receiving Calls 2 6 Call Handling Features 2 7 Conference 2 7 Hold 2 8 Mute 2 8 Spe
15. person being added to a Speed Dial button Use up to 13 characters or press Cancel to return to the Speed Dial Main screen without adding a name After completing the Name field press Done The Speed Dial Number Entry screen displays with the prompt Use dialpad to edit Number lt 25 Use the dialpad to enter the telephone number of the person for whom you are adding the Speed Dial button Use up to 24 characters and the Symbol softkey to insert appropriate spaces hyphens slashes etc in the number being entered Include any trunk number s needed to obtain an outside line Verify the Name and Number entered in Steps 3 and 5 are correct To change an entry use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed Press the Backspace Line Feature Button to remove that character and re enter that character Alternately to erase a field entirely select that field by pressing the Clear Line Feature button you can then enter new data in the cleared field December 2003 Updating Speed Dial Button Label Using the Speed Dial Application Information 7 When the Name and Number are correct press the Save softkey to add the information to a Speed Dial button Press the Cancel softkey to exit without saving The Name Number entry is added to the Speed Dial list in alphabetical order by Name The Speed Dial Main screen redi
16. shown in the case displayed on the alpha softkey The cursor does not move A subsequent press of the same key replaces the character shown with the next alphabetic character assigned to that key You can use the and keys to display those symbols even in alpha and ALPHA mode For example with the Mode softkey displaying ALPHA or alpha pressing the 2 on your dialpad displays the letter A or a depending upon which alphabetic mode is active Pressing the 2 key again replaces the A with a B or b pressing it again replaces the B with a C or c Pressing the same key again replaces the C with an A or a and so on Pressing a different key moves the cursor one position to the right and displays the first alphabetic character associated with that key Repeat this key press entry process to complete the text field You may also use Bksp or Space softkeys to delete the character to the left of the cursor or to insert a space respectively When the Mode softkey displays Num your 4610SW IP Telephone recognizes a key press as a numeral or a typographic character such as or and advances the cursor one position to the right When the Mode softkey displays Symbol use the Line Feature buttons to select the desired symbol Access additional pages of symbols using the More softkey or the Page Right or Page Left buttons on the phone When selected the symbol is automatically i
17. the field in which the cursor is positioned Pressing one of these buttons causes the respective action to be taken at the current cursor position Name Entry Example To add a Speed Dial button for Jane O Hara you would typically press the following dialpad number button Right Arrow softkey in sequence 5 J 2 a 66 n 33 e 666 0 44 h 2 a 777 r 2 a After entering the above sequence the display shows Janeohara By incorporating the editing Line Feature buttons and softkeys during entry your actual key press sequence should be 5 J 2 a 66 n 33 e Right Arrow softkey to move the cursor one space to the right 666 0 Case Softkey 2 to change the o to upper case Symbol Softkey 3 to display the Symbol Character screen Issue 2 0 December 2003 3 3 Adding a Speed Dial Button Using the Speed Dial Application Line Feature Button 6 Apostrophe 44 h Case Softkey 2 to change the h to upper case 2 a 77 r 2 a Adding a Speed Dial Button 3 4 1 Issue 2 0 Access the Speed Dial application by pressing the SpDial softkey The Speed Dial Main screen displays Press the Add softkey The Speed Dial Name Entry screen displays with a cursor in the Name field gt NOTE For assistance with entering information on this screen see the previous section titled Entering Data on Speed Dial Screens Use the dialpad to enter the name of the
18. using the extension you entered If this is your extension you can force the other user off the system by pressing the pound key to answer OK to both the Extension and the Password prompts Issue 2 0 December 2003 2 11 Logging Off the Phone Using Your 4610SW IP Telephone 2 12 Issue 2 0 December 2003 a eS Using the Speed Dial Application Introduction This chapter describes how to add update and delete a Speed Dial button label Up to 48 Speed Dial buttons are allowed each containing a name and corresponding telephone number Entering Data on Speed Dial Screens Review this section if you are unfamiliar with entering data using a telephone dialpad or using softkeys for editing functions Entering Characters Using the Dialpad Use the dialpad keys 0 through 9 and to enter characters in a Name or Number field To select a field press the Line Feature button on either side of the field to which you want to move When entering a Name the first press of a dialpad key displays the first alphabetic character associated with that key to the right of the current cursor position This character is shown in lower case and the cursor does not move A subsequent press of the same key replaces the character shown with the next alphabetic character assigned to that key still in upper case or the number assigned to that key if all three alphabetic characters have been displayed Issue 2 0 Decemb
19. your phone to another because Send All Calls or Call Forwarding All Calls is active Meaning Call Waiting Ringback Tone _ Confirmation Coverage Intercept Time out _ _ _ 8 2 Issue 2 0 December 2003 Low pitched rapid tone repeated 60 times per minute signifying the number dialed is in use A ringback tone with lower pitched signal at the end This indicates the extension called is busy and the called party has been given a Call waiting tone Three short tone bursts This indicates a feature activation or cancellation was accepted One short tone burst This indicates your call will be sent to another extension for a covering user to answer Continuous tone indicating dialing can begin Alternating high and low tone indicating a dialing error denial of a requested service or failure to dial within a preset interval usually 10 seconds after lifting the handset or dialing the previous digit Telephone Management and Troubleshooting Interpreting Display Icons Feedback Handset Tones Meaning Recall Dial Three shorts tone bursts followed by a steady dial tone indicate a feature request was accepted and dialing can start Reorder Fast busy tone repeated every half second indicates all phone trunk lines are busy Ringback Low pitched tone repeated 15 times a minute indicates the number dialed is ringing Interpreting Display Ic
20. 0 December 2003 6 17 Selecting a Display Language 6 18 4610SW IP Telephone Options 3 Select the Line Feature button next to the language you want your phone to display when in use If the currently active language was selected the third Options Main screen re displays and no action is taken If any language other than the currently active language was selected the Language Confirmation screen displays The prompt Are you sure displays in the currently active language and in the new language you selected The four softkeys at the bottom of the display are labeled respectively Yes and No in both the currently active language and the selected new language 4 Choose one of the following options If you want to Proceed to change the current language to the new language Retain the currently active language without changing the user interface display language Issue 2 0 December 2003 Then Select either Yes softkey The active language changes to the new language you selected The second Options Main screen re displays All screens now display the new user interface language Select either No softkey The language remains unchanged and the Language Selection screen re displays Repeat the procedure from Step 2 to select a different language or select Return to return to the second Options Main screen 4610SW IP Telephone Options Changing a Phone PC Ethernet Interface _ SS ee
21. AVAYA 4610SW IP Telephone Release 2 0 User s Guide 555 233 784 Issue 2 0 December 2003 Copyright 2003 Avaya Inc All Rights Reserved Notice Every effort was made to ensure that the information in this document was complete and accurate at the time of printing However information is subject to change Warranty Avaya Inc provides a limited warranty on this product Refer to your sales agreement to establish the terms of the limited warranty In addition Avaya s standard warranty language as well as information regarding support for this product while under warranty is available through the following Web site http www avaya com support Preventing Toll Fraud Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party for example a person who is not a corporate employee agent subcontractor or is not working on your company s behalf Be aware that there may be a risk of toll fraud associated with your system and that if toll fraud occurs it can result in substantial additional charges for your telecommunications services Disclaimer Avaya is not responsible for any modifications additions or deletions to the original published version of this documentation unless such modifications additions or deletions were performed by Avaya Customer and or End User agree to indemnify and hold harmless Avaya Avaya s agents servants and employees against all claims la
22. Calling a Party from the 2 5 Deleting a Single Entry 4 5 Deleting All Entries 4 6 Troubleshooting 8 7 Viewing a 4 3 Call Log Application 1 8 Call Log Application Using the 4 1 Call Log Entries Deleting 4 5 Deleting a Single Entry 4 5 Deleting all entries from a log 4 6 Call Log Entry Adding to a Speed Dial Button 4 4 Call Timers Display Setting the 6 5 Calling a party from the Call Log 2 5 Calling a party from the Web Access Application Changing the Display Contrast 6 9 Conference Adding a held call to the current call 2 7 Adding another party to a call 2 7 Dropping the last person added to the call 2 7 Conference button 1 5 Conference feature 2 7 D Deleting a Speed Dial Button Label 3 7 Deleting Call Log Entries 4 5 Issue 2 0 December 2003 IN 1 4610SW IP Telephone Dialing Automatic 2 3 Automatically using an administered Line Feature button 2 5 Calling a Party from the Call Log 2 5 Calling a Party from the Web Access Application 2 6 Manual 2 2 Redialing 2 3 using a Speed Dial button 2 4 Dialpad Entering Characters Using the 3 1 Display Contrast Changing the 6 9 Display description 1 4 Display Icons Interpreting 8 3 Drop button 1 5 Dropping the last person added to the call during Conference 2 7 Editing During or After Data Entry 3 2 Enhanced Dialing 2 3 2 6 8 7 8 8 Entering Characters Using the Dialpad 3 1 5 6 Entering Data on Speed Dial Screens 3 1 Entering Text on Web Pages 5 4 Feature and Telepho
23. IP Telephone Options 2 Choose one of the following options 3 6 10 If you want to Re label one or more Feature buttons View the default labels for your Feature buttons Restore the default label to a single Feature button Restore the default labels to all your Feature buttons Then Select Relabel feature buttons The Feature Button Relabeling screen displays Proceed to Step 3 Select View default labels The Default Feature Button View screen displays Review the default labels then select Return to re display the Feature Button Labeling Options screen Repeat Step 2 selecting a different option Select Relabel feature buttons The Feature Button Relabeling screen displays Proceed to Step 3 Select Restore default labels The Restore Default Feature Button Labels screen displays The prompts Restore all Feature Button labels to default settings and Press Default to confirm display To restore the default labels select Default To return to the Feature Button Labeling Options screen without making a change select Cancel The Feature Button Labeling Options screen displays If Right Left Page indicators appear in the softkey button area your phone has more than one page of Feature buttons Use the Right or Left Page Indicator to move to the page on which you want to re label one or more Feature buttons As you move from page to page the top display area shows the curren
24. NING Because the type of power cycle mentioned in Step 2 involves reprogramming certain values Step 2 should only be performed by your System Administrator 8 10 Issue 2 0 December 2003 Index Numerics 4600 Series IP Telephones Handsets 7 2 Headsets for 7 1 4610SW Applications Troubleshooting 8 7 4610SW IP Telephone about the 1 1 Application Options 6 3 Applications 1 8 Button Feature Descriptions 1 4 Icons Background Colors for administered features 1 7 Illustration of 1 3 Introduction 1 1 Logging Off 2 11 6 11 Options 6 1 Reinstating the Phone After a Log Off 2 11 6 12 Resetting and Power Cycling 8 9 Telephone Button Feature Descriptions 1 4 Telephone Options 1 9 Troubleshooting 8 1 Using Your 2 1 A About the Call Log 4 2 Accessing the Options Main Menus 6 2 Adding a Call Log Entry to a Speed Dial Button 4 4 Adding a held call to the current call during Conference 2 7 Adding a Speed Dial Button 3 4 Adding a Speed Dial Button for a Website Telephone Number 5 7 Alternate Language Selecting an 6 17 Application Options 6 3 Application Screens Navigating 1 6 Applications for 4610SW IP Telephone 1 8 Authentication for Web Access 5 2 Automatic Backup Option Setting the 6 13 Automatic Dialing 2 3 B Backup File Retrieving and Restoring Data from 6 14 Backup Restore Options 6 12 Basic Troubleshooting Chart 8 5 C Call Appearances 2 1 Call Handling Features 2 7 Call Log About the 4 2
25. See Using the Call Log Application for more information about the Call Log Calling a party from the Web Access Application Your 4610SW s optional Web Access application can automatically dial web links designated as phone numbers by the web page author To call a party using a web link just select that link gt NOTE If your administrator has set up the Enhanced Dialing feature selecting a link to call a party causes the 4610SW to automatically add any appropriate digits such as those required to get an outside line to phone numbers If you select a call link but the call does not go through check with your Telephone Administrator to ensure that the Enhanced Dialing feature is set up properly for your environment Receiving Calls 2 6 When someone calls you and the Phone screen is active the Bell icon appears as the phone rings and if so administered the Voice Message light flashes When the Phone screen is active call information displays on the incoming call appearance line If the Phone screen is not active call information appears on the top display line To receive the call pick up the handset activate the headset or press the Speakerphone button and talk gt NOTE You can set an option for whether the Phone screen displays when you receive an incoming call or whether the current screen remains displayed You can also set an option to flash the Message Waiting Lamp when the phone rings See Applic
26. The table below summarizes Avaya s corded headset connectors and cordless headset choices and provides ordering codes Headset Connector Type Ordering Code M12LUCM Corded 407639715 HIP Cord Corded 700212442 LKA10 includes Headset Cordless Solution 408271385 MIP 1 Accessory 700281074 gt NOTE If your IP telephone does not have a fixed headset button your System Administrator must administer your phone for headset operation when using the HIP Cord Handsets for 4600 Series IP Telephones 7 2 Specialized handsets are available for noisy environments hearing impaired users and other special purposes See the following table for specialized handsets and replacement handsets for your phone Headset Connector Type Ordering Code AK1A 2001 Replacement Handset 700203797 AK5A 1001 Push to Talk 700229727 AK6A 1001 Amplified 700229735 AK8A 1001 Noisy Location 700229743 Issue 2 0 December 2003 Telephone Management and Troubleshooting Introduction The 4600 Series IP Telephones are relatively trouble free This chapter provides helpful information for Interpreting the different ringer tones you hear Interpreting the 4610SW s display symbols Testing your telephone to be sure it is operating correctly a Basic Troubleshooting This chart provides the most common problems an end user might encounter and suggested resolutions Application specific troubleshooting This chart describes problems and
27. Voice Message Light 1 4 Testing Your Phone 8 4 Volume Control buttons 1 5 Text entering 3 1 3 2 5 4 5 6 Transfer Sending a call to another telephone 2 10 Transfer button 1 5 W Transfer feature 2 10 Troubleshooting 4610SW Applications 8 7 eer Troubleshooting Chart Basic 8 5 Web Access Application Calling a party from the 2 6 Troubleshooting and Telephone Management 8 1 Troubleshooting 8 8 Using the 5 1 Web Access Authentication 5 2 Web Pages U Entering Characters Using the Dialpad 5 6 Entering Text on 5 4 Updating Speed Dial Button Label Information 3 5 Navigating 5 3 User ID 6 15 Website Telephone Number Adding a Speed Dial Using the Call Log Application 4 1 Button for 5 7 IN 4 Issue 2 0 December 2003
28. acquired knowledge and resources from a variety of sources including but not limited to e Installation documents e System administration documents e Security documents e Hardware software based security tools e Shared information between you and your peers Telecommunications security experts To prevent intrusions to your telecommunications equipment you and your peers should carefully program and configure e Your Avaya provided telecommunications systems and their interfaces e Your Avaya provided software applications as well as their underlying hardware software platforms and interfaces e Any other equipment networked to your Avaya products TCP IP Facilities Customers may experience differences in product performance reliability and security depending upon network configurations design and topologies even when the product performs as warranted Standards Compliance Avaya Inc is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Avaya Inc The correction of interference caused by such unauthorized modifications substitution or attachment will be the responsibility of the user Pursuant to Part 15 of the Federal Communications Commission FCC Rules the user is cautioned that changes or modifications not expressly approved by Avaya Inc could void the user s
29. age Display Rate 6 6 Miscellaneous Status 6 8 Network Audio Quality 6 8 Password setting 6 15 Phone Screen on Answer 6 4 Phone Screen on Calling 6 5 Quality of Service QoS Status 6 8 Redial 6 4 Status Screen Viewing 6 7 User ID setting 6 15 Viewing IP Address Status 6 7 Visual Alerting 6 6 Options button 1 4 Options Main Menus Accessing the 6 2 Options Screens Troubleshooting 8 8 Options for 4610SW IP Telephone 1 9 Page Right Left buttons 1 4 Paging indicator 1 4 Password 6 15 Phone Application 1 8 Phone Application Troubleshooting the 8 7 Phone Feature buttons 1 6 Phone Screen on Answer Option 6 4 Phone Screen on Calling Option 6 5 Phone Exit button 1 4 Phone PC Ethernet Interface Changing 6 19 Placing a call on hold 2 8 Power Cycling the Phone 8 10 Q Quality of Service QoS Status Viewing 6 8 R Receiving Calls 2 6 Redial button 1 5 Redial Option Setting the 6 4 Redialing a party 2 3 Redialing the last number called 2 3 Redialing using a list of the last six numbers called Reinstating the Phone After a Log Off 2 11 6 12 Resetting and Power Cycling the 4610SW IP Telephone 8 9 Resetting Your Phone 8 9 Restoring Data from a Backup File 6 14 Retrieving a held call 2 8 Retrieving a Voice Mail Message 2 10 Retrieving and Restoring Data from a Backup File 6 14 Ringer Tones Interpreting 8 2 S Sending a call to another telephone 2 10 Setting a User ID Password and other FTP Options 6
30. akerphone 2 8 Transfer 2 10 a Retrieving a Voice Mail Message 2 10 Logging Off the Phone 2 11 Reinstating the Phone After a Logoff 2 11 Forcing a Login to the Phone 2 11 3 Using the Speed Dial Application a Introduction 3 1 a Entering Data on Speed Dial Screens 3 1 Entering Characters Using the Dialpad 3 1 Editing During or After Entry 3 2 Name Entry Example 3 3 Adding a Speed Dial Button 3 4 a Updating Speed Dial Button Label Information 3 5 a Deleting a Speed Dial Button Label 3 7 vi Issue 2 0 December 2003 Contents 4 Using the Call Log Application a Introduction 4 1 About the Call Log 4 2 a Viewing a Call Log 4 3 a Adding a Call Log Entry to a Speed Dial Button 4 4 a Deleting Call Log Entries 4 5 Deleting a Single Call Log Entry 4 5 Deleting All Entries from a Call Log 4 6 es 5 Using the Web Access Application m Introduction 5 1 Web Access Authentication 5 2 a Navigating Web Pages 5 3 Navigating the Home Page and Other Standard Size Web Pages 5 3 a Entering Text on Web Pages 5 4 Entering Characters Using the Dialpad 5 6 a Adding a Speed Dial Button for a Website Telephone Number 5 7 Issue 2 0 December 2003 vii Contents 6 4610SW IP Telephone Options a Introduction 6 1 Accessing the Options Main Menus 6 2 a Application Options 6 3 Setting the Redial Option 6 4 Setting the Phone Screen on Answer Option 6 4 Setting the Phone Screen on Calling Option 6 5 Setting the Call Timers Displ
31. all is in a Call Log other than the one for Missed calls press the softkey that represents the Call Log where that entry appears either Outgo or InAns The selected Call Log displays 3 If the party you want to call appears proceed to Step 4 If the party you want to call is not displayed press the Page Right button to display the next page of entries Continue until the number party you want displays You can also press the Page Left lt 3 button to display the preceding page of entries 4 Press the Line Feature button associated with the name number of the person you want to call The associated Call Detail screen displays Issue 2 0 December 2003 2 5 Receiving Calls Using Your 4610SW IP Telephone 5 Select Call The phone goes off hook and the selected party s number is dialed If the Phone Screen on Calling option is set to Yes as described in Chapter 6 the Phone application screen displays A Call Log entry is created for this call gt NOTE If your administrator has set up the Enhanced Dialing feature selecting Call causes the 4610SW to automatically add any appropriate digits such as those required to get an outside line to phone numbers in the Missed and InAns Call Logs If you press Call but the call does not go through check with your Telephone Administrator to ensure that the Enhanced Dialing feature is set up properly for your environment 6 Proceed with the call as usual
32. andling Features Using Your 4610SW IP Telephone Hold The Hold feature puts a call on hold until you retrieve it Placing a call on hold Press the Hold B button The line s display area changes to white text with a dark gray background and the Hold Sami icon displays Retrieving the held call Press the Line Feature button on which the call is being held or press the Hold button The call is now active Mute During an active call the Mute feature prevents the party with whom you are speaking from hearing you You generally use this feature in conjunction with the Speakerphone but you can hold an off line conversation at any time during a call Preventing the other person on the line from hearing you 1 Press the Mute ED button The other party cannot hear you The indicator next to the Mute button lights when Mute is active 2 To reinstate two way conversation press the Mute QD button again Speakerphone A two way built in Speakerphone lets you place and answer calls without lifting the handset gt NOTE It is also possible to disable the Speakerphone feature or limit it to one way operation If your Speakerphone does not operate as indicated contact your System Administrator to ensure that your telephone s Speakerphone is properly administered 2 8 Issue 2 0 December 2003 Using Your 4610SW IP Telephone Call Handling Features Placing or answering a call without li
33. ates Follow your standard voice mail retrieval procedures to retrieve your messages If you have voice mail related questions contact your Telephone System Administrator Issue 2 0 December 2003 Using Your 4610SW IP Telephone Logging Off the Phone Logging Off the Phone Log your 4610SW IP Telephone off to prevent unauthorized use during an absence Logging off erases your unique set of Options deletes your Call Log and restores any relabeled Feature buttons to their default values Logging off does not change your Speed Dial entries You can also log off directly through the Options menu See Chapter 6 Logging Off the 4610SW IP Telephone for details gt NOTE Before you can log off ensure that the telephone is on hook and idle no call appearance lines in use 1 To log your phone off press the Mute button then press the following numbers on the dialpad 5 6 4 6 3 3 which stands for LOGOFF A request to un register the phone is sent to the server The phone is now in a logged off state and displays Ext Reinstating the Phone After a Logoff 1 Using the dial pad enter your Extension number then press the Pound key The display prompts for entry of your password 2 Using the dial pad enter your Password then press the key The 4610SW is now ready for use Forcing a Login to the Phone If you try to log your phone in and Extension in Use displays another person is already
34. ation Options in Chapter 6 for details Issue 2 0 December 2003 Using Your 4610SW IP Telephone Call Handling Features SS Call Handling Features The features described in this section are available while calls are in progress Use the dedicated Feature buttons on the telephone itself or administered Feature buttons available using the 4610SW s softkeys as applicable Conference The Conference feature allows you to conference up to the maximum number of parties set by your System Administrator Adding another party to a call 1 Dial the first party then press the Conference Cy button The line s display area changes to white text with a dark gray background The current call is placed on hold the Soft Hold Wa icon displays and you hear a dial tone 2 Dial the number of the next party and wait for an answer 3 Press the Conference q button again to add the new party to the call 4 Repeat Steps 1 3 for each party you want to conference in to the call Adding a held call to the current call 1 Press the Conference gt button The icon on the current line changes to the Soft Hold Wam icon 2 Press the Line Feature button of the held call 3 Press the Conference Cc J button again All parties are now connected Dropping the last person added to the call Press the Drop q gt button The last party connected to the conference call is dropped from the call Issue 2 0 December 2003 2 7 Call H
35. ation Options screens using the standard paging indicators To change or set any Application screen option press the Line Feature button on either side of that option For example if an option is set to No pressing the corresponding Line Feature button changes the setting to Yes Issue 2 0 December 2003 6 3 Application Options 4610SW IP Telephone Options 6 4 Setting the Redial Option The Redial option provides one of two redial choices Automatically redial the last number called when the Redial button is pressed or Display a list of the last 3 numbers called when the Redial button is pressed allowing you to choose the number you want redialed This is the default setting 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the next setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changing it press the Cancel softkey After saving or cancelling the first Options Main screen displays Setting the Phone Screen on Answer Option When the Phone Screen on Answer option is set to Yes the Phone screen appears in the display area when you answer a call regardless of the screen you were working with at that time You lose any unsaved work in progress for example labeling a Speed Dial button when the Phone screen displays The only exception is the Web Access application wh
36. atus screen press the Return softkey Each option is described in the following sub sections Viewing IP Address Status IP Internet Protocol address information encompasses two screens and identifies certain components and connections IP Address information includes the location address of your phone on your system s Call Server the location and port connection of the Call Server itself a the call routing and mask addresses and the identification of the File Server with which your telephone interacts Although technical in nature your System Administrator might ask you for information to track questions about or problems with phone functions or connections Issue 2 0 December 2003 6 7 Viewing the Network Audio Quality 4610SW IP Telephone Options ee Viewing Quality of Service QoS Status QoS refers to a number of mechanisms used to improve audio quality over the network Viewing Interface Status Your phone interfaces with several system hardware devices and system software This screen provides information about three of the main interfaces Viewing Miscellaneous Status Five miscellaneous status screens provide additional information about your telephone and its connections Viewing the Network Audio Quality If you experience poor audio quality during a call the problem is likely with your network Your LAN Administrator might ask you to display these screens to diagnose or tr
37. ay 6 5 Setting the Message Display Rate 6 6 Setting Visual Alerting 6 6 Status Screen Viewing Options 6 7 Viewing IP Address Status 6 7 Viewing Quality of Service QoS Status 6 8 Viewing Interface Status 6 8 Viewing Miscellaneous Status 6 8 a Viewing the Network Audio Quality 6 8 a Changing the Display Contrast 6 9 Feature Button Labeling 6 9 a Logging Off the 4610SW IP Telephone 6 11 Reinstating the Phone After a Log Off 6 12 Backup Restore Options 6 12 Setting the Automatic Backup Option 6 13 Retrieving and Restoring Data from a Backup File 6 14 Setting a User ID Password and other FTP File Transfer Protocol Options 6 15 a Selecting a Display Language 6 17 a Changing a Phone PC Ethernet Interface 6 19 es 7 Headsets and Handsets a Introduction 7 1 Headsets for 4600 Series IP Telephones 7 1 Handsets for 4600 Series IP Telephones 7 2 viii Issue 2 0 December 2003 Contents Telephone Management and Troubleshooting a Introduction 8 1 a Interpreting Ringer Tones 8 2 a Interpreting Display Icons 8 3 Testing Your Phone 8 4 Testing the Telephone s Lights and Display 8 4 Basic Troubleshooting Chart 8 5 Troubleshooting 4610SW Applications 8 7 a Resetting and Power Cycling the IP Telephone 8 9 Resetting Your Phone 8 9 Power Cycling the Phone 8 10 ee Index IN 1 Issue 2 0 December 2003 ix Contents x Issue 2 0 December 2003 rer About This Guide Overview This guide covers
38. ays on the active call appearance line and the 4610SW IP Telephone initiates the call 3 Hang up the handset deactivate the headset or press the Speakerphone button to end the call 2 2 Issue 2 0 December 2003 Using Your 4610SW IP Telephone Making Calls Automatic Dialing Automatic dialing includes redialing a previously called number speed dialing a number programmed on a Speed Dial button m using an administered Abbreviated Dialing Feature button to initiate a call dialing a party listed on your Call Log or dialing a party from a web page displayed via the Web Access application gt NOTES The 4610SW IP Telephone often receives telephone numbers through the Call Log or Web Access application that are not immediately dialable For example the Call Log may contain an incoming call from the following U S phone number 732 555 1234 In general if you try to dial that number as is the call cannot go through first you have to dial one or more digits to obtain an outside line access your corporate telephone network or add some other code before you can return the call The 4610SW IP Telephone can if appropriately administered automatically dial those extra digits for you So with one touch the telephone automatically dials 91 732 555 1234 Your Telephone Administrator has information on setting up this Enhanced Dialing capability e If all lines are in use automatic dialing will not wo
39. d Options Main screen This displays the Backup Restore Main screen containing all related backup restore options and settings gt NOTE On the Backup Restore Main screen check the Automatic Backup setting to determine if your phone is already set for automatic backups The default setting is Disabled meaning automatic backup will not occur unless you change the setting to Enabled Issue 2 0 December 2003 4610SW IP Telephone Options Backup Restore Options Setting the Automatic Backup Option You must change the Automatic Backup setting to Enabled to automatically back up your options settings Feature Button labels and Speed Dial button labels names and numbers whenever you change any of these values If this setting is Disabled you might have to first provide additional information such as the FTP server on which your backed up data will reside before you can change the setting 1 Check below the FTP Status line for one of the following messages and proceed as directed If The message Options SD entries amp feature button labels may be saved displays No message displays The message An FTP Server IP Address must be provided for this feature displays Then Automatic backup is already enabled and no further action is required Select Return to display the second Options Main screen Proceed to Step 2 to change the automatic backup setting from Disabled to Enabled or select Retur
40. d from which data is restored User ID and Password unique identifiers assigned to a phone user for server security purposes gt NOTES il All FTP settings are set to blank upon phone manufacture and repair e Because FTP information may impact server operation and the proper backup of your phone data contact your System Administrator before updating any settings The User ID and Password in the following procedure provide access to your server Such access allows you to perform backup and other future server related features The User ID and Password are not the Avaya Communication Manager registration ID and password which identify you as an authorized user of your respective system To update any of the FTP settings select FTP Setup from the Backup Restore Main screen The FTP Settings Main screen displays Issue 2 0 December 2003 6 15 Backup Restore Options 4610SW IP Telephone Options 2 Choose one of the following options If you want to Add or update the Server IP Address Add or update the directory path to which backup saves your data Add or update the Server User Name 6 16 Issue 2 0 December 2003 Then Select the Line Feature button next to Server IP Address The FTP Server Address Input screen displays The top display area prompts Enter IP address if no server name is currently assigned or IP Address or DNS name lt 17 if you are modifying an existi
41. e Changing a Phone PC Ethernet Interface The 4610SW IP Telephone ordinarily communicates with any optionally attached PC in auto negotiation mode This basically means the PC and telephone together decide how to communicate when they are connected Although unlikely there may be an occasion where you or your System Administrator will want to force the communication to a particular setting 1 Select PC Ethernet interface from the third Options Main screen The first PC Ethernet Interface screen displays showing the current setting 2 If the setting to which you want to change appears on the first screen see Step 3 If the setting to which you want to change does not display on the first screen use the Page Right indicator to move to the second screen 3 Press the Line Feature button on either side of the desired setting The Current setting on the first screen changes to your selected setting 4 To save your selection select Save To restore the original setting without changing it select Cancel The third Options Main screen redisplays Issue 2 0 December 2003 6 19 Changing a Phone PC Ethernet Interface 4610SW IP Telephone Options 6 20 Issue 2 0 December 2003 Headsets and Handsets Introduction This chapter provides information about headsets and specialized handsets that are compatible with your IP telephone Headsets for 4600 Series IP Telephones Avaya supports only those headsets and heads
42. e reasonable protection against harmful interference when the equipment is joperated in a commercial environment This equipment generates luses and can radiate radio frequency energy and if not installed land used in accordance with the instruction manual may cause lharmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Part 68 Answer Supervision Signaling Allowing this equipment to be operated in a manner that does not provide proper answer supervision signaling is in violation of Part 68 rules This equipment returns answer supervision signals to the public switched network when e answered by the called station e answered by the attendant or e routed to a recorded announcement that can be administered by the customer premises equipment CPE user This equipment returns answer supervision signals on all direct inward dialed DID calls forwarded back to the public switched telephone network Permissible exceptions are e A call is unanswered e A busy tone is received e A reorder tone is received Avaya attests that this registered equipment is capable of providing users access to interstate providers of operator services through the use of access codes Modification of this equipment by call aggregators to block access dialing codes is a violation
43. elephone features are described in Chapter 17 Telephony of the Overview for Avaya Communication Manager Document Number 555 233 767 Issue 2 0 December 2003 xiii Related Documentation Training About This Guide ts xiv Issue 2 0 December 2003 Introducing Your 4610SW IP Telephone Introduction This chapter introduces you to the layout of the 4610SW IP Telephone It provides a description for each functional button and other phone characteristics briefly describes each 4610SW application and provides basic instructions for navigating display screens The 4610SW IP Telephone The 4610SW IP Telephone is an innovative telephone that gives you access to the World Wide Web while offering the latest features and applications The display area allows up to six application specific buttons to be presented and labeled at one time Additionally six Line Feature buttons and four softkeys provide access to powerful capabilities such as call server based features speed dialing aCall Log and aWML Wireless Markup Language a web development protocol browser This last feature is covered in Chapter 5 The WML browser provides access to websites tailored specifically for devices with smaller display screens like cell phones and Personal Data Assistants In addition to these features and applications the 4610SW provides a robust menu of options to customize your phone preferences Issue 2 0 Decembe
44. en press the Pound key The display prompts for entry of your password 2 Using the dialpad enter your PBX switch Password then press the Pound key The phone is now ready for use Backup Restore Options 6 12 The 4610SW IP Telephone s backup and restore options allow you to a Back up your options preference settings your Speed Dial button labels names and numbers and Feature button labels This occurs automatically whenever you save a change to any one of those settings or buttons Automatic backup protects this data against system failure by allowing you to restore your backup file of active settings and button labels Restore options settings Speed Dial button labels names and numbers and Feature button labels following a phone failure or replacement Establish or modify FTP File Transfer Protocol settings such as the network server address directory path for saving backed up data and a User ID and Password for server access through your phone Verify whether an automatic backup has occurred Because each telephone system has unique characteristics and settings modifying the Backup Restore options usually requires your System Administrator s assistance For example it is unlikely that you know the specific Server IP Address to enter when setting up FTP parameters without consulting your System Administrator To verify or change any of the above options select Backup Restore from the thir
45. er 2003 3 1 Entering Data on Speed Dial Screens ee 3 2 Using the Speed Dial Application For example pressing the 2 on your dialpad displays the letter A Pressing the 2 key again replaces the A with a B pressing it again replaces the B with a C and pressing it again replaces the C with a 2 Pressing it again redisplays the letter A and so on Pressing a different key moves the cursor one position to the right and displays the first alphabetic character associated with that key All letters after the first display by default in lower case Repeat this key press entry process to enter the rest of the party s name And you can use the Left Arrow fm and Right Arrow m softkeys to move the cursor to the left or right respectively When entering a telephone number in the Number field your 4610SW IP Telephone recognizes a key press as a numeral or typographic character such as or and automatically moves the cursor to the right gt NOTE You can enter text while on a call however you automatically exit text entry mode if you go off hook either via the headset handset or by a fixed button like Transfer Also you automatically exit text entry mode if you cause another screen to display for example by pressing Save or Cancel or pressing the T button Editing During or After Entry Editing commands display below the Name or Number field next to certain Line Feature butt
46. er for redialing while in this state an error beep tone sounds and no further action occurs 3 Proceed with the call A Call Log entry is created for this call Dialing a party using a Speed Dial button Automatic dialing of pre stored numbers is the most common method of automatic dialing You can set up Speed Dial buttons and select the party you want to call by pressing that button For information on setting up Speed Dial buttons see Using the Speed Dial Application Because the 4610SW IP Telephone s advanced capabilities allow up to 48 speed dial entries speed dialing as described here is convenient and efficient 1 Press the SpDial softkey at the bottom of the display screen The first six Speed Dial buttons display one name number per button and the prompt Select entry to dial appears at the top of the display area 2 Ifthe party you want to call appears on the display proceed to Step 3 If the party you want to call is not shown press the Page Right E button to display the next page of entries Continue until the number party you want displays You can also press the Page Left button to display the preceding page of entries 3 Press the Line Feature button associated with the name number of the person you want to call The number of the selected person dials automatically 4 Pick up the handset activate the headset or use the Speakerphone to proceed with the call 5 Hang up the handset deac
47. es no yes 3 Choose one of the following If you want to Reset the phone without resetting any assigned values Reset the phone and any previously assigned programmed values Use this option only if your phone has programmed static values Then Press asterisk A confirmation tone sounds and the display prompts Restart phone no yes Press the pound key The display shows the message Resetting values while your IP Telephone resets its programmed values such as the IP address to its default values and re establishes the server connection The display then prompts Restart phone no yes 4 Press to restart the phone or to terminate the restart and restore the phone to its previous state gt NOTE Any reset restart of your phone may take a few minutes Issue 2 0 December 2003 8 9 Resetting and Power Cycling the IP Telephone Telephone Management and Troubleshooting ee Power Cycling the Phone Use the power cycle with your System Administrator s approval Use power cycling only if the basic or programmed reset procedure cannot be performed or does not correct the problem 1 Unplug the phone and plug it back in The phone connection is re established 2 If power cycling does not correct the problem your System Administrator can perform a more severe power cycle routine by unplugging both the phone and the Ethernet cables A WAR
48. et adapters that carry an Avaya brand or logo There are a variety of Avaya headsets that are compatible with your 4600 Series IP Telephone To see the available headsets view the Freedom of Choice Headsets brochure To access the Freedom of Choice Headsets brochure 1 Go to http AWwww avaya com 2 Mouse over Products amp Services and select Products A Z 3 Select Headsets 4 Under Find out More select Brochures then Freedom of Choice Headsets Issue 2 0 December 2003 7 1 Handsets for 4600 Series IP Telephones Headsets and Handsets Headsets require headset adapters connectors to operate Avaya offers three types of headset adapters for 4600 Series IP Terminals The MIP 1 provides remote call answering and call initialization features with the Avaya Cordless Headset a The Modular base amplifier M12LUCM which is a high performance solution for users who continuously wear headsets and a An HIP cord which allows basic direct headset connection to your Avaya IP telephone Avaya also offers a cordless headset solution LKA10 with up to a 150 ft mobile range from the base The LKA10 when used with an MIP 1 offers remote call answering and call initialization features on the 4610SW 4620 4620SW and 4630SW IP Telephones The MIP 1 must be ordered separately The LKA10 when used without an MIP 1 operates with other Avaya IP telephones but cannot be used for remote call answering or call initialization
49. ext setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changing it press the Cancel softkey After saving or cancelling the first Options Main screen displays Setting the Call Timers Display Your 4610SW IP Telephone is capable of displaying two types of call timers The Call Timer displays in the top display area showing the elapsed time you are connected on a call in h mm ss hours minutes seconds format The Hold Timer displays in the applicable call appearance area showing the elapsed time a call has been on hold When the Display Call Timers option is set to Yes the Call Timer displays on either the active call appearance line if the Phone screen is displayed or the top display line if a screen other than the Phone screen is displayed Likewise when a call is on hold the Hold Timer displays in the corresponding call appearance area or the top display line depending on whether the Phone screen is or is not displayed This is the default setting When the Display Call Timers option is set to No neither the Call Timer nor the Hold Timer displays Call time data is still maintained by the phone for Call Log purposes 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the next setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changi
50. fting the handset or using the Speakerphone with any feature 1 Press the Speaker button The indicator next to the Speaker button lights and the speaker handles voice control The first available call appearance line activates 2 Place or answer the call or access the selected feature 3 Adjust the speaker volume if needed by pressing the Volume Control vy button until you reach the desired volume level As you press the Volume Control button the top display area shows the volume level Changing from the Speakerphone to the handset or headset Pick up the handset or activate the headset The Speaker indicator next to the Speaker button goes off and audio control reverts to the handset or headset as applicable Changing from the handset or headset to the Speakerphone Press the Speaker Ep button then hang up the handset the headset is automatically deactivated The indicator next to the Speaker button lights and voice control is handled by the speaker Turning the Speaker on during a call Press the Speaker ED button The Speaker indicator next to the Speaker button lights The Speaker is now operational Turning the Speaker off during a call Lift the handset or activate the headset at any time The Speaker and the corresponding indicator light turn off voice control reverts to the handset headset Ending a call while the Speaker is active Press the Speaker button The Speaker and the corre
51. g a Call Log Entry to a Speed Dial Button Using the Call Log Application Adding a Call Log Entry to a Speed Dial Button 4 4 1 Issue 2 0 Access the Call Log application by pressing the Log softkey The Missed Calls Main screen displays If the party for whom you want to create a Speed Dial button is listed on the Missed Calls Log proceed to Step 3 If the Missed Call Log does not list the party for whom you want to create a Speed Dial button press the softkey for that entry s Call Log Outgo InAns The Outgoing or Incoming Answered Call Log Main screen displays as applicable Press the Line Feature button to the left of the party for which you want to create a Speed Dial button The Detail screen for that entry displays If the AddToSD softkey is not displayed you have the maximum number 48 of Speed Dial buttons labeled and cannot add a new entry unless you remove an entry first Press the AddToSD softkey The Speed Dial Editing screen displays to allow you to make a change to the name or number The prompt Use dialpad to edit Number lt 25 displays with the cursor positioned at the end of the Number field gt NOTE For assistance with entering information on this screen see the section in Chapter 3 titled Entering Data on Speed Dial Screens If no Name Number changes are needed proceed to Step 8 To change the telephone number use the Left Arrow softkey and or the Right
52. he Backup Restore Main screen The 4610SW attempts to initiate FTP File Transfer Protocol to retrieve the latest backup file from the server The message FTP Retrieval in progress displays Any one of the following additional messages may display as appropriate 6 14 If Following server connection the backup file is retrieved with data in the proper format Connection to the FTP server cannot be made Connection is made with the FTP server but the file is not in the specified directory or cannot be retrieved for any reason Issue 2 0 December 2003 Then The messages File successfully retrieved and Press Save to replace current data with data from retrieved file display Select Save All previous values are replaced with the backup file data The Backup Restore Main screen re displays The message Cannot access FTP server displays Select Retry If the connection is made review the messages above for a successful retrieval and proceed accordingly If the connection still cannot be made the server might be busy or not functioning Select Cancel to return to the Backup Restore Main screen and try the Restore procedure again later Optionally verify with your System Administrator that the Server s IP Address is correct The message Cannot obtain file displays Contact your System Administrator for instructions on how to proceed 4610SW IP Telephone Options Backu
53. he Call Log Application Chapter 5 Using the Web Access Application Chapter 6 4610SW IP Telephone Options Chapter 7 Headsets and Handsets Chapter 8 Telephone Management and Troubleshooting Issue 2 0 December 2003 Describes each element on the face of the telephone and telephone applications Covers all call related information such as initiating calls receiving calls speed dialing calling a party on the call log conferencing and transferring calls logging off the phone for security purposes and logging back on to the phone Describes how to add update and remove speed dial buttons to facilitate quick dialing of frequently called numbers Describes how to view entries on each of the three types of call logs add a log entry toa speed dial button and delete one or more call log entries Explains how to use the 4610SW s web access functions Provides setup and maintenance procedures for 4610SW telephone options Also covers troubleshooting certain phone functions Provides ordering information for 4610SW compatible headsets and specialized handsets Covers testing your phone s operation and provides basic troubleshooting actions if you encounter errors or experience problems About This Guide Related Documentation Training SES Conventions Used This guide uses the following textual symbolic and typographic conventions to help you interpret information Symbolic Conventions
54. hone is idle the top area displays the current date and time When someone is calling you the name phone number of that person displays in the top area The display has five lines Three lines are devoted to the current application One line shows softkey labels for the current application and the top line shows Help and other procedural messages Four grayscale colors indicate phone application activity 3 Line Feature Six Line Feature buttons provide both call appearances buttons lines for incoming and outgoing calls and application specific functionality 4 Softkeys Used to navigate to or start application specific actions such as Call a number Cancel the current activity Save entered data and Store a speed dial label 5 Phone Exit Displays the Phone application main screen or if applicable exits the current call server based feature and gt normalizes the display 6 Options Displays the first Options main screen from which display and application settings can be updated rv play pp g p 7 Page Right Left Shifts from one page to another in the same application when the display presents the paging indicator K These buttons have no effect when the Paging gt Indicator is not displayed 8 Speaker LED Lights steadily when the Speakerphone is active Indicator 9 Speaker Accesses the Speakerphone feature gt 10 Headset LED Lights steadily when the headset is active Indicator 1 4 Issue 2 0 December
55. ialed from the phone or D displays a list of the last six numbers dialed for selection o Set using the Options button described in Chapter 6 21 Numeric Standard 12 button pad for dialing phone numbers Dialing Pad Issue 2 0 December 2003 1 5 Navigating Application Screens Introducing Your 4610SW IP Telephone er Navigating Application Screens Your 4610SW IP Telephone uses a combination of Phone Feature buttons Line Feature buttons and Softkeys to allow you maximum flexibility in operating the phone and working with its applications While reviewing this section it may be helpful to refer to Figure 1 1 on page 1 3 Phone Feature buttons are used in the Phone application and appear on the face of the telephone around the dialpad Phone buttons have an icon on the top of the button to indicate the button s function These buttons provide mostly call handling features like Transfer Conference Hold or Redial Two additional phone feature buttons available on the 4610SW are a Phone Exit C used to exit call server based features and restore the Phone screen to the display and Options used to access the Options function to set certain phone parameters and view phone server connection status and other information for troubleshooting The Page Right and Page Left buttons daD between the Phone Exit and Options buttons are also considered phone buttons Use them to mo
56. ich remembers the current web page When the Phone Screen on Answer option is set to No answering an incoming call has no impact on the application screen displayed The top display line however provides an appropriate message This is the default setting 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the next setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changing it press the Cancel softkey After saving or cancelling the first Options Main screen displays Issue 2 0 December 2003 4610SW IP Telephone Options Application Options Setting the Phone Screen on Calling Option When the Phone Screen on Calling option is set to Yes the Phone screen appears in the display area when you make a call regardless of the screen you were working with at that time You lose any unsaved work in progress for example labeling a Speed Dial button when the Phone screen displays The only exception is the Web Access application which remembers the current web screen When the Phone Screen on Calling option is set to No making a call has no impact on the application screen displayed The top display line however provides an appropriate message This is the default setting 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the n
57. ight Gray aake Ce Four softkeys HP appear directly below the display area They allow you to access the other 4610SW applications In an application they allow you to perform application specific functions like add save edit delete or cancel The labels above the softkeys reflect their function relative only to that specific screen Issue 2 0 December 2003 1 7 4610SW IP Telephone Applications Introducing Your 4610SW IP Telephone ee 4610SW IP Telephone Applications 1 8 Your 4610SW IP Telephone provides four applications Phone Speed Dial Call Log and Web Access Additionally use the Options function to define settings personalize your phone and troubleshoot certain functions All applications appear in the display area accessed by the softkeys appearing below the display A brief description of each application follows Phone Application The Phone application is the primary application Use this application to make and receive calls and perform call handling operations like conference calling or transferring calls to another phone Using Your 4610SW IP Telephone provides information on using the Phone application Speed Dial Application The Speed Dial application provides access to speed dial buttons which facilitate automatic dialing Use this application to setup buttons for speed dialing update speed dial button label information or remove the label from a speed dial button
58. ight and Page Left buttons are available to help you scroll through the log three entries at a time Calls are listed in order from top to bottom the most recent call first Issue 2 0 December 2003 Using the Call Log Application Viewing a Call Log Viewing a Call Log i 2 Access the Call Log application by pressing the Log softkey The Missed Call Log Main screen displays the Caller s name number and time date of the first six unanswered calls gt NOTE All Call Log screens have the same fields characteristics and softkeys Choose one of the following options If you want to Review the next three calls Review the last three calls Review outgoing calls you made Review calls you received and answered Review missed calls Delete one or all entries from the log displayed See detailed information about a call Return to the Call Log Main screen from a Detail screen Then Press the Page Right button Press the Page Left button Press the Outgo softkey The Outgoing Calls Main screen displays Press the InAns softkey The Answered Calls Main screen displays Press the Missed softkey The Missed Calls Main screen displays See the section in this chapter titled Deleting Call Log Entries Press the Line Feature button to the left or right of that entry The appropriate Detail screen displays as applicable Press the Return softkey Issue 2 0 December 2003 4 3 Addin
59. in this chapter titled Entering Characters Using the Dialpad 2 Press the Line Feature button to the left of the Password field and enter your password 3 Choose one of the following options If you want to Authenticate the ID and Password Exit the Web application without authentication 5 2 Issue 2 0 December 2003 Then Press the Submit softkey When your ID and password have been authenticated the next page displays If your ID and or password cannot be authenticated appropriate error messages display Press the Cancel or Back softkey The previous application or options screen displays Using the Web Access Application Navigating Web Pages _ a Navigating Web Pages The Web Access application browser performs similarly to those on your PDA or cell phone Navigate web pages using a combination of Line Feature buttons and softkeys gt NOTE Calls made or received while working with the Web application have no impact on web access web page navigation or web page text entry Navigating the Home Page and Other Standard Size Web Pages ats Access the Web Access screen by selecting the Web softkey at the bottom of the display area The Home page displays 2 Ifa line is not selected highlighted first press the Line Feature button to the left of that line to bring the line in focus before proceeding 3 Navigate the Home page and other web
60. increased or decreased depending on which arrow softkey you press Chevron symbols provide visual confirmation of the current level 3 Save the contrast level you set by pressing the Save softkey or to restore the previous setting without changing the contrast press the Cancel softkey The first Options Main screen displays Feature Button Labeling SS Line Feature buttons D appear on both sides of the telephone s display area These buttons provide call appearances Lines These buttons also provide other call related features provided with your telephone system or administered by your System Administrator in the Phone application Line Feature buttons also serve as application specific buttons in other applications such as the Call Log You can use the Feature Button Labeling option to re label any of the Phone application Feature buttons For example one of your Feature buttons may be labeled CFwd for Call Forwarding but you want it to read simply Fwd Alternatively if you have re labeled several Feature buttons and want to restore the default original labels this option lets you view the default label values and restore them if desired 1 Select Feature Button Labeling on the second Options Main screen The Feature Button Labeling Options screen displays This screen always starts by displaying the first page of the telephone s Line Feature buttons Issue 2 0 December 2003 6 9 Feature Button Labeling 4610SW
61. lays Visually verify that you want to delete all entries for the Call Log then choose one of the following options If you want to Then Cancel the deletion without Press Cancel removing all of this Call Log s No deletion occurs and the Call entries Log s Main screen displays Complete the deletion of all Press Delete entries for this Call Log The entries are removed The Call Log s Main screen displays 5 To exit the Call Log application press the Phone Exit D button Issue 2 0 December 2003 as Using the Web Access Application Introduction One of the exciting aspects of the 4610SW IP Telephone is its optional Web Access application You can actually use your telephone to access your Corporate intranet and the World Wide Web Your System Administrator can optionally design a Home page on which your web options reside or using a Home page provided by Avaya for this purpose For security purposes your System Administrator can also optionally require that an authentication screen display upon selection of the Web Access application In this case you must submit a User Name and Password before gaining access to the Home and other web pages sites Note that the Web Access application offers a basic browser capability The application does not support all Internet data types nor is it intended to replace your PC s browser The 4610SW s web functions are geared towards use on a small three line di
62. n displays the prompt Use dialpad to edit Number lt 25 with the cursor positioned at the end of the Number field To change the telephone number use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move to the cursor to the right of the character s to be changed Press the Backspace button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the number entirely then retype it The Number field allows up to 24 characters gt NOTE Pressing Cancel at any time returns you to the Speed Dial Main screen without updating the label When the Name and or Number have been updated press the Save softkey to update the Speed Dial button The Name Number entry is added to an available Speed Dial button All Speed Dial buttons are re sorted in alphabetical order by Name The Speed Dial Main screen redisplays To exit the Speed Dial application press the Phone Exit CD button or select another application if applicable Issue 2 0 December 2003 5 7 Adding a Speed Dial Button for a Website Telephone Number Using the Web Access Application 5 8 Issue 2 0 December 2003 rey 4610SW IP Telephone Options Introduction EEEESSESEEEEEEeEEEEEoEEEeEEEEEEEeEeseye gt E Ee LSS SSS Sa_ z This chapter describes how to set or view phone parameters including Displaying the Phone screen upon dialing answering Dete
63. n to display the second Options Main screen You must first provide the server address and or directory in which to store your backup data Contact your System Administrator for this information and any specific instructions for your telephone system Then add the server address as described in Setting a User ID Password and other FTP File Transfer Protocol Options on page 6 15 before proceeding to Step 2 2 To automatically back up all your options settings your Feature button labels and your Speed Dial information following a save to any of these values select the Line Feature button to the right or left of Automatic Backup The setting changes from Disabled to Enabled 3 To save your selection select Save To exit without making a change select Cancel The Backup Restore Main screen re displays with the Backup Restore setting Enabled Issue 2 0 December 2003 6 13 Backup Restore Options 4610SW IP Telephone Options Retrieving and Restoring Data from a Backup File Restoring data from your most recent backup file is a two step process First you initiate backup file retrieval usually following a system failure or phone replacement Then you confirm that you want the retrieved data to replace the phone s current data gt NOTE Retrieving and restoring backup data takes only a few seconds however while in progress no other phone activity is allowed 1 Select Retrieve restored data from t
64. ne Button Descriptions 1 4 Feature Button Labeling 6 9 File Transfer Protocol See FTP FTP Options 6 15 H Handsets and Headsets 7 1 Headset Headset button 1 5 Headset Jack 1 5 Headset LED Indicator 1 4 Headsets and Handsets 7 1 Hold Placing a call on 2 8 Retrieving a held call 2 8 Hold button 1 5 Hold feature 2 8 IN 2 Issue 2 0 December 2003 Icons Background Colors for Features Administered on the 4610SW Call Server 1 7 Illustration of phone 1 3 Interface Status Viewing the 6 8 Interpreting Display Icons 8 3 Interpreting Ringer Tones 8 2 Introducing Your 4610SW IP Telephone 1 1 IP Address Status Viewing 6 7 Labeling Feature Buttons 6 9 Language Selecting an Alternate 6 17 Line Feature buttons 1 4 1 6 Log Off Reinstating the Phone after a 2 11 6 12 Logging Off the 4610SW IP Telephone 2 11 6 11 M Making Calls 2 2 Manual Dialing 2 2 Message Display Rate Setting the 6 6 Miscellaneous Status Viewing 6 8 Mute button 1 5 Mute feature 2 8 Mute LED Indicator 1 5 N Navigating Application Screens 1 6 Web Pages 5 3 Navigating Web Pages Home Page and Other Standard Size Web Pages 5 3 Network Audio Quality Viewing the 6 8 Numeric Dialing Pad 1 5 Index O Options Alternate Language 6 17 Application 6 3 Automatic Backup 6 13 Backup File retrieval restore 6 14 Backup Restore 6 12 Call Timers 6 5 Display Contrast 6 9 FTP 6 15 Interface Status 6 8 Labeling Feature Buttons 6 9 Mess
65. ne Feature button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the name entirely then retype it The Name field allows up to 13 characters Issue 2 0 December 2003 3 5 Updating Speed Dial Button Label Information 3 6 Using the Speed Dial Application After changing the name or to change the number without changing the name press Done The Speed Dial Number Entry screen displays the prompt Use dialpad to edit Number lt 25 with the cursor positioned at the end of the Number field To change the telephone number use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move to the cursor to the right of the character s to be changed Press the Backspace button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the number entirely then retype it The Number field allows up to 24 characters gt NOTE Pressing Cancel at any time returns you to the Speed Dial Main screen without updating the label When the Name and or Number have been updated press the Save softkey to update the Speed Dial button The Name Number entry is updated and all Speed Dial buttons are re sorted in alphabetical order by Name The Speed Dial Main screen redisplays To update another Speed Dial button repeat this procedure from Step 2 To exit the Speed Dial application pre
66. ned by the Responsible Party in the U S can be obtained by contacting your local sales representative and are available on the following Web site http www avaya com support All Avaya media servers and media gateways are compliant with FCC Part 68 but many have been registered with the FCC before the SDoC process was available A list of all Avaya registered products may be found at http www part68 org by conducting a search using Avaya as manufacturer European Union Declarations of Conformity CE Avaya Inc declares that the equipment specified in this document bearing the CE Conformit Europe nne mark conforms to the European Union Radio and Telecommunications Terminal Equipment Directive 1999 5 EC including the Electromagnetic Compatibility Directive 89 336 EEC and Low Voltage Directive 73 23 EEC This equipment has been certified to meet CTR3 Basic Rate Interface BRI and CTR4 Primary Rate Interface PRI and subsets thereof in CTR12 and CTR13 as applicable Copies of these Declarations of Conformity DoCs can be obtained by contacting your local sales representative and are available on the following Web site http www avaya com support Japan This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment VCCI If this equipment is used in a domestic environment radio disturbance may occur in which case the user
67. ng server address Use the dialpad and any applicable Line Feature buttons to enter the 16 character or fewer server address name See Entering Characters Using the Dialpad and Editing During or After Entry in Chapter 3 for information about data entry Select Save to save the setting and return to the Backup Restore Main screen Select Directory Path The FTP Directory Path Input screen displays The top display area prompts FTP Directory Path lt 23 Use the dialpad and any applicable Line Feature buttons to enter the path provided by your System Administrator 22 or fewer characters See Entering Characters Using the Dialpad and Editing During or After Entry in Chapter 3 for information about data entry Select Save to save the setting and return to the Backup Restore Main screen Alternately you can select Clear to remove the current path prior to entering a new path Or you can select Cancel to return to the Backup Restore Main screen without changing the current path Select User Name The FTP User Name Input screen displays The top display area prompts FTP User Name lt 16 Use the dialpad and any applicable Line Feature buttons to enter the User Name 15 or fewer characters that gives you access to the server Either your System Administrator provides the name or you select the name using parameters provided by the administrator See Entering Characters Using the Dialpad and Editing During o
68. ng it press the Cancel softkey After saving or cancelling the first Options Main screen displays Issue 2 0 December 2003 6 5 Application Options 4610SW IP Telephone Options Setting the Message Display Rate Although rare the call server can send messages to your phone that are longer than the display area If this occurs the first and then the second part of the message display for a specific time interval The Message Display Rate can be either Fast display interval is 2 seconds or Slow display interval is 3 seconds The default rate is Slow 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the next setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changing it press the Cancel softkey Upon saving the first Options Main screen displays Setting Visual Alerting When this option is set to No the default ringing is the only notification of an incoming call When set to Yes your phone rings and your voice message indicator light flashes to alert you to an incoming call 1 To change this option press the corresponding Line Feature button 2 Press the Line Feature button for the next setting you want to change or save this setting by pressing the Save softkey To restore the previous setting without changing it press the Cancel softkey Upon saving or cancelling the first O
69. nserted in the position to the right of the last character in that filed on that line and you automatically return to the alpha mode Issue 2 0 December 2003 Adding a Speed Dial Button for a Website Using the Web Access Application Telephone Number Adding a Speed Dial Button for a Website Telephone Number Some websites might include the ability to pass names and associated telephone numbers to the 4610SW IP Telephone In such cases applicable web pages display an AddToSD softkey as provided by the website s author 1 Press the AddToSD softkey The Speed Dial Name Entry screen displays to allow you to make a change to the name The cursor appears to the right of the current name entry gt NOTE For assistance with entering information on either the Name or Number Entry screen see the section in Chapter 3 titled Entering Data on Speed Dial Screens If no Name change is needed proceed to Step 3 To change the name use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed Press the Backspace Line Feature button to remove the character s and re enter the character s Or press the Clear Line Feature button to remove the name entirely then retype it The Name field allows up to 13 characters After changing the name or to change the number without changing the name press Done The Speed Dial Number Entry scree
70. ntry and displays detail information about that call In addition to the call related icons and features explained in Table 1 1 the icons and background display colors in Table 1 2 are associated with certain administrable features on the call server and may appear on the display Several 1 6 Issue 2 0 December 2003 Introducing Your 4610SW IP Telephone Navigating Application Screens features such as flash wink and flutter are associated with Call Center operations and might not apply to many 4610SW users Table 1 2 Icons Background Colors for Features Administered on the 4610SW Call Server Description Feature Button Display Icon Condition Background Color None Feature is on active Light Gray None Feature is off inactive Light Gray None Feature denied Broken Flutter This is a temporary Light Gray condition accompanied by an error beep the first time it occurs This condition then changes to the off inactive state None Idle Indicates a call appearance line is available White Ringing Indicates an incoming call is arriving on this White line Active Indicates the line is in use Light Gray On Hold Indicates a call is on hold on this line Dark Gray Soft Hold Indicates this line s call was put on hold Dark Gray pending a conference or a transfer Flash Used for Call Center operations Light Gray Flutter Used for Call Center operations Light Gray Wink Used for Call Center operations L
71. of the Telephone Operator Consumers Act of 1990 Means of Connection Connection of this equipment to the telephone network is shown in the following tables Canadian Department of Communications DOC Interference Information This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications This is confirmed by the registration number The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment Declarations of Conformity United States FCC Part 68 Supplier s Declaration of Conformity SDoC Avaya Inc in the United States of America hereby certifies that the equipment described in this document and bearing a TIA TSB 168 label identification number complies with the FCC s Rules and Regulations 47 CFR Part 68 and the Administrative Council on Terminal Attachments ACTA adopted technical criteria Avaya further asserts that Avaya handset equipped terminal equipment described in this document complies with Paragraph 68 316 of the FCC Rules and Regulations defining Hearing Aid Compatibility and is deemed compatible with hearing aids Copies of SDoCs sig
72. oftkey when entering text on web pages 2 Use the dialpad to enter text Use the softkey functions to facilitate your entry as described below If you want to Then Enter text If you are unfamiliar with 4610SW web text entry see Entering Characters Using the Dialpad below When you complete the current field text line either press the Line Feature button to the left of the next text line you want to enter press one of the Line Feature buttons on the right side of the display to move to a different line or page or press the Done softkey Pressing a left side Line Feature button displays a cursor in that line if it is a text entry box Pressing a right side Line Feature button produces the result indicated by the symbol next to that button Pressing Done deactivates the text entry mode Erase any data Press the appropriate application specific softkey entered and restore for example Clear ie taxt eniy ineto Any characters entered are removed its original format Note Application specific softkeys are determined by the application developer therefore the method of erasing or clearing entered text is subject to the application s design 5 4 Issue 2 0 December 2003 Using the Web Access Application Entering Text on Web Pages If you want to Save the text you have entered Change the case of an alphabetic character to from lower the default to upper case Enter a numeric character s Place a symbol
73. on related to this problem Contact your LAN Administrator with as complete a description of the problem as possible Check that both the handset and line cords into the phone are securely connected Note that there might be a slight operational delay if you unplug and reconnect the phone Reset or power cycle the phone with your System Administrator s assistance See the section titled Resetting and Power Cycling the IP Telephone for details Contact your System Administrator if the above steps do not produce the desired result Use the Up Down Volume keys to set your ringer volume to a higher level From another phone place a call to your extension to test this suggested solution Verify the procedure and retry For certain features you must lift the handset first or place the phone off hook Contact your System Administrator if the above action does not produce the desired result Your telephone system might have been specially programmed for certain features applicable only to your installation Contact your System Administrator Telephone Management and Troubleshooting Troubleshooting 4610SW Applications Problem Symptom Suggested Resolution GENERAL A feature does not work as indicated in this guide or does not work as it had previously worked PHONE APPLICATION SPEED DIAL APPLICATION You cannot dial out using any Speed Dial button You cannot add an entry to the Speed Dial list
74. ons As you become more familiar with your IP Telephone s display you will recognize the icons or symbols associated with the state of a call or the state of the phone This chart provides an overview of the icons you might see Check with your System Administrator to verify if the descriptions are accurate for your system Icon Meaning No Icon Displayed Idle Indicates the line is available Active Indicates the line is in use On Hold Indicates a call is on hold on this line Ringing Indicates an incoming call is arriving on this line C Soft Hold Indicates this line s call was put on hold pending a conference or a transfer Issue 2 0 December 2003 8 3 Testing Your Phone Telephone Management and Troubleshooting Testing Your Phone The Test feature allows you to verify that your telephone s lights and display are operating properly Testing the Telephone s Lights and Display 1 With the telephone idle on hook press and release the Mute button then press the following numbers on the dialpad 8 3 7 8 which stands for TEST The display indicates the self test has started If the test is successful the message Self test Passed end displays If the testis not successful the message Self test Failed end displays instead 2 Press to return to the Phone screen If nothing appears on the display and the phone is receiving power your phone might need to be replaced
75. ons The commands and their actions are Backspace Line Feature Button 3 Deletes the character to the immediate left of the cursor Clear Line Feature Button 6 Removes all characters from the field in which the cursor currently resides a Case Softkey 2 Changes the character to the right of the cursor from lower case to upper case or vice versa depending upon its original case Note that when entering a name the first character entered is initially displayed in upper case with subsequent characters initially displayed in lower case letters Symbol Softkey 3 Displays the Symbol Character screen from which you may select one of the following attributes a Period Line Feature Button 1 Inserts a period at the cursor position Comma Line Feature Button 2 Inserts a comma at the cursor position In a Number field a comma creates a short pause when the telephone automatically dials that number a Hyphen Line Feature Button 3 Inserts a hyphen at the cursor position Issue 2 0 December 2003 Using the Speed Dial Application Entering Data on Speed Dial Screens a Space Line Feature Button 4 Inserts a blank space at the cursor position a Slash Line Feature Button 5 Inserts a slash at the cursor position Apostrophe Line Feature Button 6 Inserts an apostrophe at the cursor position gt NOTE Some of the above commands such as Case appear only when there is data in
76. ons Cv button below and to the right of the display area Using Options menus you Set certain phone parameters such as display area contrast how you want the Redial button to work when you want your saved information backed up or restored the language you want displayed or how you want your Feature buttons labeled You can also view telephone status screens for troubleshooting or information purposes Chapter 6 4610SW IP Telephone Options covers all options Issue 2 0 December 2003 1 9 4610SW IP Telephone Applications Introducing Your 4610SW IP Telephone 1 10 Issue 2 0 December 2003 Se aS es Using Your 4610SW IP Telephone Introduction This chapter describes how to make calls receive calls retrieve voice mail messages and log off your 4610SW IP Telephone The telephone Line Feature buttons that assist in call handling are also covered in this chapter Call Appearances In the Phone application both call appearance lines and administered feature buttons take up half the display width The half width display area allows more Line Feature buttons per screen With half width call appearances only the Line Feature buttons on the appropriate left or right side of the button can be used to select that call appearance Any call associated messages for that call appearance show on the top display line Issue 2 0 December 2003 2 1 Making Calls Using Your 4610SW IP Telephone Making Calls You have seve
77. oubleshoot audio problems Although technical in nature these screens provide information that can help identify causes of poor audio quality gt NOTE The Network Audio Quality button displays only when you are on a call off hook 1 Select Network Audio Quality from the Options Main screen accessed by pressing the phone s Option button If administered the Audio Status screen 1 displays The bottom line presents a non technical summary of network audio quality 2 To return to the first Options Main screen press the Return softkey 6 8 Issue 2 0 December 2003 4610SW IP Telephone Options Changing the Display Contrast ee Changing the Display Contrast On first time startup your 4610SW IP Telephone s display area contrast is set to a mid level To adjust it to better suit your work environment and lighting 15 contrast levels are available gt NOTE You might not be able to distinguish between all 15 contrast level settings Some of the upper and or some of the lower contrast level settings may appear identical to adjacent settings This is normal 1 Select the Contrast Control option from the Options Main screen accessed by pressing the phone s Option button 2 To brighten the contrast press the Right Arrow softkey until you reach the desired contrast level To dim the contrast press the Left Arrow softkey until you reach the desired contrast level Each softkey press results in the level being
78. p Restore Options 2 If you want to return to the Backup Restore Main screen without retrieving or restoring the backup file select Cancel The retrieval or restoration of backup data is cancelled and any partially retrieved data is discarded The Backup Restore Main screen re displays gt NOTE Your Telephone Administrator can turn off the ability to make changes to Speed Dial buttons In this case you can retrieve the backup file as normal but any changes you might have made to that backup file s Speed Dial button label data are ignored Setting a User ID Password and other FTP File Transfer Protocol Options Your System Administrator establishes certain parameters for each 4610SW IP Telephone in your network Most parameters are established at the network server and apply to all telephones in the network Other parameters may be unique to a specific site department or group of telephones Those settings which may be unique to your phone appear on the FTP File Transfer Protocol Setup screen They are Server IP Address the specific server to which your 4610SW IP Telephone is connected for backup restore and other network related functions If your phone has been repaired this value is set to zero and should be re established Directory Path the server location to which your telephone s data for example Speed Dial labels names and numbers options and Feature Button labels is sent during a backup an
79. pages as follows If you want to Then Redisplay the Home page Press Line Feature button 5 Any web page loading processing stops and the Home page displays Move the web page down one Press Line Feature button 6 page to see the next three l lines Move the web page up one Press amp Line Feature button 4 page to see the previous three lines Traverse multiple pages Press the Page Right or Page Left button to navigate to the next or previous page respectively Use a link to go to another Press the Line Feature button to the left page of the line displaying an underlined link gt NOTE You can view and scroll through images if any are presented as well as text Issue 2 0 December 2003 5 3 Entering Text on Web Pages Using the Web Access Application ee Entering Text on Web Pages Text entry pages are those on which you can enter data for example a name a web address URL or other identifying information A set of square brackets each separated by three blank spaces CJ identifies a page s text entry areas 1 To enter data first press the Line Feature button to the left of the line on which you want to enter text Four new softkeys display Done Bksp and Space with the fourth softkey labeled alpha by default This softkey is called the Mode softkey because it changes the mode of text being entered Any reference in this manual to the Mode softkey refers to the fourth s
80. ptions Main screen displays 6 6 Issue 2 0 December 2003 4610SW IP Telephone Options Status Screen Viewing Options Status Screen Viewing Options Two Status Main screens provide views of telephone and system information You generally do not need to view this information However if problems occur your System Administrator might ask you to report certain values from any status screen gt NOTE Status screen data can be viewed but cannot be changed 1 Select View IP Settings from the Options Main screen accessed by pressing the phone s Option button The View Status Main screen 1 displays providing the options to view IP addresses the quality of service or interfaces 2 To select any option on this screen press the Line Feature button on either side of that option To display the second Status Main screen or when any screen has more than one page the Paging Indicator displays to allow scrolling from one page to another using the Page Right or Page Left Indicator buttons as applicable The View Status Main screen 2 displays providing access to additional settings and phone information 3 To select any option on this screen press the Line Feature button on either side of that option To display any additional screen s the Paging Indicator displays Use the Page Right or Page Left Indicator buttons to scroll from one page to another as applicable 4 To return to the first Options Main screen from any st
81. r 2003 1 1 The 4610SW IP Telephone Introducing Your 4610SW IP Telephone Your telephone s display area coincides with how your System Administrator sets up the Line Feature buttons On the phone itself these features provide ease of use and flexibility 4 softkeys which assist you in using the 4610SW applications and features a 14 standard labeled buttons which assist in telephone operation and call handling and abuilt in two way speakerphone You can also attach the telephone to an adjustable stand to optimize your viewing position This diagram illustrates the face of the 4610SW IP Telephone and contains numbered callouts which identify the phone s primary features and buttons Each callout is described in detail in Table 1 1 which follows the diagram 1 2 Issue 2 0 December 2003 Introducing Your 4610SW IP Telephone The 4610SW IP Telephone Figure 1 1 4610SW IP Telephone SPEAKER q HEADSET A E TRANSFER CONFERENCE CC DROP i REDIAL Ho Issue 2 0 December 2003 1 3 The 4610SW IP Telephone Introducing Your 4610SW IP Telephone Table 1 1 4610SW IP Telephone Button Feature Descriptions Callout Button Feature Button Feature Number Name Description 1 Message When lit indicates you have a message waiting on your Waiting Lamp voice messaging system This indicator can also be optioned to flash for incoming calls m d 2 Display When the p
82. r After Entry in Chapter 3 for information about data entry Select Save to save the setting and return to the Backup Restore Main screen 4610SW IP Telephone Options Selecting a Display Language If you want to Then Add or modify Select Password OUr Sever The FTP Password Input screen displays The top Password display area prompts FTP Password lt 13 Use the dialpad and any applicable Line Feature buttons to enter the Password using parameters provided by your System Administrator Select Save to save the setting and return to the Backup Restore Main screen Return to the Select Cancel Backup MESION No change is made and the Backup Restore Main Main screen F without screen re displays changing the selected FTP setting Repeat this procedure from Step 1 for each FTP setting you want to add or modify Selecting a Display Language Users can change the user interface language their 4610SW IP Telephones display Language options are English the default display language Frangais Italiano Japanese Katakana only Espa ol Deutsch Nederlands Portugu s Select Select display language on the third Options Main screen The first Language Selection screen displays If the language to which you want to change is shown go to Step 3 If the language to which you want to change is not shown first use the Page Right indicator to move to the second Language Selection screen Issue 2
83. ral ways of making calls You can lift the handset activate a headset if one is connected to your phone use the Speakerphone or use an automatic dial feature like speed dial redial or abbreviated dialing This section describes all of these calling methods gt NOTE You can set an option for whether the Phone screen displays when you make an outgoing call or whether the current screen remains displayed See Application Options in 4610SW IP Telephone Options for details Manual Dialing Dial a call manually by picking up the handset activating your headset pressing the Speakerphone button or simply starting to dial with the handset on hook 1 Pick up the handset activate your headset or press the Speakerphone button and dial You may also start dialing with the phone on hook In this case the phone automatically goes off hook and activates the speaker after you press the first keypad digit If the Phone screen is active the first available call appearance line displays the off hook icon and the background appears shaded If the Phone screen is not active the top display line provides call related messages If applicable the Call Timer displays at the top of the display area gt NOTE Displaying the Call Timer is optional and is set by means of the Options button See 4610SW IP Telephone Options for information 2 Use the dialpad to enter the number you want to call The number entered displ
84. rk Redialing a party Depending on how you have set up your Redial option as covered in 4610SW IP Telephone Options selecting Redial automatically dials the most recent number dialed or displays a list of the last three outgoing calls for selection of the number to be dialed Both procedures follow Your Telephone Administrator can turn off the Redial feature or can restrict your phone to dialing only the last number dialed If the Redial feature is turned off pressing the Redial button generates an error tone If the Redial feature is restricted to only the last number dialed follow the instructions below for Redialing the Last Number Called Redialing the last number called Press the Redial gt Feature button The last number dialed is automatically redialed Issue 2 0 December 2003 2 3 Making Calls Using Your 4610SW IP Telephone Redialing using a list of the last three numbers called 1 Press the Redial ED Feature button The Redial screen displays the last three unique numbers dialed and the prompt Select number to dial appears at the top of the display 2 Press the Line Feature button associated with the number you want to redial If the call can be dialed the Phone application screen displays and the selected number dials automatically If the selected number cannot be dialed for example if all call appearance lines are currently on Hold all Redial entries are disabled If you press a numb
85. rmining how you want the Redial feature to work redial the last number called or select from a list of the last three calls Displaying the Call Timer Changing the rate at which messages display Changing the display area s contrast Logging off Backing up and restoring Speed Dial button data feature button labels and options settings Personalizing feature button labels Selecting a different language for the 4610SW user interface Allowing the Voice message light to flash when the telephone rings This chapter also covers how to verify the status of certain phone server interactions This information can be useful in troubleshooting problems or when discussing phone operation with your System Administrator gt NOTE Your Telephone Administrator can turn off all user settable options If you press the Options button while on hook and the only option displayed is View IP Settings your administrator has turned off those options you can set You cannot change any current settings Issue 2 0 December 2003 6 1 Accessing the Options Main Menus 4610SW IP Telephone Options Accessing the Options Main Menus 6 2 1 To access the Options application press the Options button D to the right of and below the softkeys The first of three Options Main screens displays 2 Use the standard paging indicators to move between the two Options Main screens The three options categories displayed on the first Options
86. ry s Call Log Outgo InAns With the entry to be deleted displayed press the Line Feature button corresponding to that entry The selected entry s Detail screen displays Press the Delete softkey The prompt Press Delete again to confirm displays at the top of the screen Visually verify that you want to delete the Name and Number displayed then choose one of the following options If you want to Then Cancel the deletion without Press Cancel Ee mevingamenGalNheg eiiy No deletion occurs and the Call Log s Main screen displays Complete deleting this Call Press Delete peg only The entry is removed and the remaining entries on this Call Log remain sorted in chronological order The Call Log s Main screen displays To exit the Call Log application press the Phone Exit C button Issue 2 0 December 2003 4 5 Deleting Call Log Entries Using the Call Log Application 4 6 Deleting All Entries from a Call Log 1 Access the Call Log application by pressing the Log softkey The Missed Calls Main screen displays To clear the Missed Calls Log proceed to Step 3 To clear the Incoming Answered Calls Log press the InAns softkey to display that Call Log then proceed to Step 3 To clear the Outgoing Calls Log press the Outgo softkey to display that Call Log then proceed to Step 3 Press the Delete All softkey The prompt Press Delete again to confirm disp
87. screen are Backup Restore provides access to the Backup Restore Main screen from which you can set automatic backups of speed dial options and feature button label data restore the previous backup file set up and verify the status of your File Transfer Protocol FTP Select display language lets you change the display from the current language to any of seven alternate languages PC Ethernet Interface allows you to specify communications settings between your phone and PC if attached The procedures that follow describe each Options category in detail 3 To select an option press the Line Feature button on either side of the desired option The respective Options screen displays 4 To change the current setting press the corresponding Line Feature button The option setting toggles to and displays the next choice 5 To exit the Options application press any of the softkeys labeled for other 4610SW applications SpDial Log and Web To return to the Phone application press the Phone Exit gt button Application Options Application options let you change call related default options You select this option from the Options Main screen accessed by pressing the phone s Options button Two Application Options screens are available The first screen provides the functionality to change call related settings The second screen allows you to set visual alerting Move between the two Applic
88. splay screen more like those of a Personal Data Assistant PDA or cellular telephone This chapter describes the basic functions available with the Web Access application These functions include a accessing and navigating pages linked to the Home page entering text on applicable web pages and a setting up a Speed Dial entry for a name and associated telephone number found on applicable websites Because your System Administrator can customize the Web Access application for specific business use not all features described in this chapter may apply Issue 2 0 December 2003 5 1 Web Access Authentication Using the Web Access Application Other features which result from customizing may not be described here For this reason contact your System Administrator for specific information about your Web Access application before proceeding Because customizing may affect the flow of web related activity this chapter only describes the primary web screen types Web Access Authentication Depending on how your Web Access application is administered you might have to provide identification before gaining access to web pages If you do not know your User ID or Password contact your System Administrator for assistance 1 If the Web Authentication input screen displays after selecting the Web softkey use the dialpad to enter your User ID or Name gt NOTE For information on entering text using the dialpad see the section
89. splays allowing you to verify that the new button is now available for automatic dialing 8 To add another Speed Dial button repeat this procedure from Step 2 9 To exit the Speed Dial application press the Phone Exit CD button gt NOTE You can position an entry at the beginning of the list out of alphabetical order by placing a space asterisk etc as the first character of the name For example Bruce would be placed before Aaron on the list Updating Speed Dial Button Label Information Use the following procedure to change the name or number associated with a Speed Dial button 1 Access the Speed Dial application by pressing the SpDial softkey The Speed Dial Main screen displays 2 Use the Page Left and or Page Right buttons as appropriate until the entry you want to update displays 3 Press the Edit softkey The prompt Select entry to edit displays 4 Press the Line Feature button corresponding to the button you want to update The Speed Dial Name Entry screen displays with the cursor to the right of the current name entry gt NOTE For assistance with entering information on either the Name or Number Entry screen see the previous section titled Entering Data on Speed Dial Screens 5 To change the name use the Left Arrow Line Feature button and or the Right Arrow Line Feature button to move the cursor to the right of the character s to be changed Press the Backspace Li
90. sponding indicator light turn off and the call terminates Issue 2 0 December 2003 2 9 Retrieving a Voice Mail Message Using Your 4610SW IP Telephone Transfer The Transfer feature lets you transfer a call from your telephone to another extension or outside number Sending a call to another telephone 1 With the call active or with only one held call and no active calls press the Transfer r ot button The call is placed on hold The Hold am icon displays and you hear a dial tone while the next available line activates Dial the number to which you want to transfer the call If you do not want to announce the call press the Transfer gt button again and proceed to Step 6 If you wish to wait for an answer and announce the call see Step 4 The call is sent to the extension or number you dialed A two second display message indicates the transfer is complete Remain on the line and announce the call If the line is busy or if no one answers return to the held call by pressing the Line Feature button on which it is being held Press the Transfer GD button again The call is sent to the extension or number you dialed A two second display message indicates the transfer is complete Hang up your handset Retrieving a Voice Mail Message 2 10 When someone leaves a message in your voice mailbox the Message Indicator lt gt the red light at the top middle of the phone illumin
91. ss the Phone Exit D button Issue 2 0 December 2003 Using the Speed Dial Application Deleting a Speed Dial Button Label Deleting a Speed Dial Button Label 1 Access the Speed Dial application by pressing the SpDial softkey The Speed Dial Main screen displays Use the Page Left and or Page Right buttons as appropriate until the entry you want to delete displays Press the Delete softkey The prompt Select label to delete displays Press the Line Feature button corresponding to the button you want to remove The Speed Dial Deletion screen displays the prompt Press Delete again to confirm Visually verify that you want to delete the Name and Number displayed then choose one of the following options If you want to Then Cancel the deletion without Press Cancel removing this speed Dialpulton No deletion occurs and the Speed Dial Main screen displays Complete deleting this Speed Press Delete Dial button The label is removed The remaining Speed Dial buttons are re sorted by Name The Speed Dial Main screen displays the page from which the entry was removed Issue 2 0 December 2003 3 7 Deleting a Speed Dial Button Label Using the Speed Dial Application 3 8 Issue 2 0 December 2003 Using the Call Log Application Introduction This chapter describes the three Call Logs available on your 4610SW IP Telephone It also provides procedures for adding a Call Log entr
92. t page number gt NOTE Your System Administrator might have locked one or more labels so that you cannot edit them Locked labels are shaded in white When you cannot change a locked button an error beep tone sounds when you select that button Select press the Feature button you want to re label or for which you want to restore the default label The Feature Button Label Editing screen displays For reference the current label appears next to the first Feature button Issue 2 0 December 2003 4610SW IP Telephone Options Logging Off the 4610SW IP Telephone 5 To re label a Feature button use the dialpad and any applicable Line Feature buttons to enter the new label 13 or less characters To restore the default label to the selected Feature button select Clear to remove the label you previously defined See Entering Characters Using the Dialpad and Editing During or After Entry in Chapter 3 for information about data entry 6 Select Save to save the new modified label or to restore the default label as applicable Alternately select Cancel to exit the screen without saving a change or restoring the default label The Feature Button Labeling screen re displays gt NOTE Some Feature buttons might be provided as part of your telephone software In the event of a software upgrade such standard Feature button labels may be overwritten with a new standard label erasing any re labeling you may ha
93. ting it the first time Check all lines into the phone to ensure that it is properly connected Check the power source to ensure that your telephone is receiving power Perform the following Test procedure with the telephone idle on hook press and release the Mute button then press the following numbers on the dialpad 8 3 7 8 which stands for TEST The display should indicate the self test has started then report if the test was successful or failed If nothing appears on the display and the phone is receiving power your phone may need to be replaced If these suggested solutions do not resolve the problem reset or power cycle the phone with your System Administrator s assistance Issue 2 0 December 2003 8 5 Basic Troubleshooting Chart Problem Symptom Telephone Management and Troubleshooting Suggested Solution Audio quality is poor specifically you hear an echo while using a handset static sudden silences gaps in speech clipped or garbled speech etc No dial tone Phone does not ring A feature does not work as indicated in this guide for example the Redial button doesn t operate as described All other IP Phone problems 8 6 Issue 2 0 December 2003 Various potential network problems may be causing the problem Access the Network Audio Quality screen described in Viewing the Network Audio Quality in Chapter 6 to provide your System Administrator with specific informati
94. tivate the headset or press the Speakerphone p button to end the call Issue 2 0 December 2003 Using Your 4610SW IP Telephone Making Calls Automatically dialing a party using an administered Line Feature button Your System Administrator may have programmed individual numbers on Line Feature buttons this is called Abbreviated Dialing If so such numbers display on the Phone application screen with labels assigned by the System Administrator If the label for the number you want to call appears in the display area press the appropriate button or Press the Page Right E or Page Left button s below the display area until the label of the party you want to call displays Then press that button The number dials automatically and the screen displays the appropriate call appearance line as active gt NOTE Usually you can re label administered Feature buttons as you see fit as described in Feature Button Labeling on page 6 9 Calling a party from the Call Log Your 4610SW IP Telephone maintains a log of up to 45 outgoing incoming answered and incoming unanswered calls to from your phone Each log can have up to 15 calls 1 To call a party listed in the Call Log press the Log softkey at the bottom of the display area The first three missed calls display one name number per button and the prompt Select entry for details appears at the top of the display area 2 If the party you want to c
95. uggested Resolution WEB ACCESS APPLICATION Pressing the Web softkey does not Check with your LAN Administrator to determine if display a website the web server is not operating if there are network connectivity problems or other network problems Dialing from this application does Your administrator must administer settings for the not go through Enhanced Dialing feature beyond the defaults You cannot add an entry to the You have 48 Speed Dial entries the maximum Speed Dial list allowed You must delete at least one entry before adding a new entry OPTIONS No Options other than View IP Your administrator has turned off all user settable Settings display options 8 8 Issue 2 0 December 2003 Telephone Management and Troubleshooting Resetting and Power Cycling the IP Telephone Resetting and Power Cycling the IP Telephone Reset your IP Telephone when other troubleshooting suggestions do not correct the problem or after being advised to do so by your System Administrator A CAUTION Use a Power Cycle only with the approval of your System Administrator and only when a reset does not resolve the problem Power cycling may cause stored information such as options and settings to be lost Resetting Your Phone This basic reset procedure should resolve most problems 1 Press the Mute button 2 Using the dial pad press the following keys in sequence 73738 The display shows the message Reset valu
96. ve forward Right Arrow or backward Left Arrow from one display screen to another These paging buttons work in conjunction with the paging indicators gt you may see on an application screen Paging indicators show that a screen has more than one page and allow you to navigate forward and back through those additional pages To activate the function or feature represented by a phone button simply press the appropriate button Line Feature buttons D appear on both sides of the display area These buttons provide call appearances Lines and other call related features as administered by your System Administrator in the Phone application They also serve as application specific buttons in the Call Log or other applications For example pressing a Line Feature button in the Call Log application selects the corresponding entry allowing you to take further action with your selection When you enter text on a screen for example labeling a Speed Dial button several Line Feature buttons provide editing features like backspacing or hyphenation Here is an example of the difference between a Line Feature button s functionality in the Phone application versus other applications To call someone from the Phone application the default display screen you press the first Line Feature call appearance button and dial your party But in the Call Log application pressing the first Line Feature button selects highlights the first call log e
97. ve performed Logging Off the 4610SW IP Telephone Log your telephone off to prevent unauthorized use during an absence or for privacy purposes Locate the Log Off option on the second Options Main screen A CAUTION Logging off deletes all Call Log entries and returns any options you may have changed to their default values 1 To log your phone off from any application screen press the Options button to the right of and below the softkeys Then press the Page Right button The second Options Main screens displays 2 Select the Line Feature button on either side of the Log Off option The Log Off screen displays the prompt Do you want to log off 3 To proceed select the Line Feature button on either side of Yes To return to the Options Main screen without logging off select the Line Feature button on either side of No Selecting Yes unregisters your phone from the call server deleting your Call Log entries and returning any options you may have set to their default values Selecting No displays the first Options Main screen your phone remains logged on to the network and your Call Log and options values remain unchanged Issue 2 0 December 2003 6 11 Backup Restore Options 4610SW IP Telephone Options Reinstating the Phone After a Log Off When your phone is logged off the top line displays Ext 1 To reinstate your phone following a log off use the dialpad to enter your Extension Number th
98. wsuits demands and judgments arising out of or in connection with subsequent modifications additions or deletions to this documentation to the extent made by the customer or End User Avaya Fraud Intervention If you suspect that you are being victimized by toll fraud and you need technical assistance or support in the United States and Canada call the Technical Service Center s Toll Fraud Intervention Hotline at 1 800 643 2353 How to Get Help For additional support telephone numbers go to the Avaya support Web site http www avaya com support If you are e Within the United States click the Escalation Management link Then click the appropriate link for the type of support you need Outside the United States click the Escalation Management link Then click the International Services link that includes telephone numbers for the international Centers of Excellence Providing Telecommunications Security Telecommunications security of voice data and or video communications is the prevention of any type of intrusion to that is either unauthorized or malicious access to or use of your company s telecommunications equipment by some party Ve 66 Your company s telecommunications equipment includes both this Avaya product and any other voice data video equipment that could be accessed via this Avaya product that is networked equipment An outside party is anyone who is not a corporate employee
99. y to a Speed Dial button and deleting one or all Call Log entries For information on calling a party listed in any Call Log see Making Calls in Chapter 2 of this guide Issue 2 0 December 2003 4 1 About the Call Log Using the Call Log Application About the Call Log 4 2 Call logs are helpful for tracking who called while you were away from the phone a redialing the number of a previous call you made or obtaining telephone numbers from previous calls The 4610SW also allows you to set up a Speed Dial button for any call listed facilitating dialing of frequently called numbers All calls made to or from your 4610SW IP Telephone are added to one of three Call Logs Outgoing Calls Incoming Answered Calls and Missed unanswered Calls The Missed Call Log displays automatically whenever you access the Call Log application but you can quickly access a different log if desired Each log has a main screen which lists the calls in chronological order newest to oldest and a details screen The main screens provide the Name and Number of the calling or called party if available and a time for the current date or date for calls prior to the current date The details screen displays all this information in a wider format shows what type of call it was and allows you to take certain actions with that entry Each Call Log can contain a maximum of 15 entries When a log contains more than three entries Page R

Avaya 4610 - IT Services

Contents

Download Pdf Manuals

Related Search

Related Contents