Altec Lansing Moondance Home Digital Speaker System and Alarm
Contents
1. Play a track from your iPod In iPod mode press the PII button See the Listening to Your iPod section for more information Pause your iPod In iPod mode press the Pll button Turn up the volume Press the button Press and hold the button to quickly adjust the volume Turn down the volume Press the button Press and hold the button to quickly adjust the volume Mute the volume Momentarily press the MUTE button NOTE To cancel the mute press the MUTE VOLUME or VOLUME buttons Skip to the beginning of the current song on your iPod Rewind the currently playing track on your iPod In iPod mode press the i button In iPod mode press and hold the i button Skip to the beginning of the next song on your iPod In iPod mode press the button Wireless Remote Features Fast forward the currently playing track on your iPod In iPod mode press and hold the button Tune radio stations In FM mode use the TNE and TNE buttons See the Listening to the Radio section for additional information Seek radio stations In FM mode press and hold the TUNE or TUNE button See the Listening to the Radio section for additional information Automatically tune and save all clear FM Press and hold the AUTO button on the wireless remote for 3 seconds Select preset FM station Set the alarm In FM mode2. VOLUME buttons on the wireless remote to select the alarm daily frequency F Choose F1 7 to have the alarm go off every day Choose F1 5 to have the alarm go off Monday through Friday Choose F6 7 to have the alarm go off on Saturday and Sunday Choose F1 to have the alarm go off only once at the next selected time 15 16 Setting the Alarm 8 Exitthe Alarm Set mode Press the ALARM1 button on the speaker system or the ENTER button on the wireless remote to exit the Alarm Set mode The speaker system will also automatically exit the Alarm Set mode after 5 seconds of inactivity NOTE When exiting the Alarm Set mode the alarm is automatically turned on To turn off the alarm press the corresponding ALARM 1 ALARM2 button NOTE The alarm time is displayed in the lower right hand corner of the LCD display when you turn the alarm on If both alarms are active the time for Alarm 1 will be displayed in the lower right hand corner NOTE If both alarms are active at overlapping times Alarm 1 takes precedence over Alarm 2 NOTE This Altec Lansing Moondance Home speaker system features a built in backup battery system to provide continuous clock settings in the event of a power failure If a power failure occurs or the AC cord is accidentally disconnected the display will not remain lit and the alarm will not function but the current time will be maintained NOTE If iPod is selected as the alarm source but no iPod is
3. convenience receptacles and the point where they exit from the apparatus Do not install in an area that impedes the access to the power plug Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times Power source Use only power supplies of the type specified in the operating instructions or as marked on the appliance If a separate power supply is included with this apparatus do not substitute with any other power supply use only manufacturer provided power supplies Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped For service refer to qualified service personnel return to the dealer or call the Altec Lansing service line for assistance For products that incorporate batteries please refer to local regulations for proper battery disposal Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combinati
4. press the or 4 button to select desired preset station See the Setting the Alarm section for instructions on setting the alarms Dismiss the alarm Press either the ALARM1 or ALARM2 button when the alarm is sounding Snooze for 5 minutes Press the SNOOZE button when the alarm is sounding Sleep See the Setting the Sleep Timer section for more information on the SLEEP button NOTE For best results aim the wireless remote toward the Moondance Home speaker system 10 Source button Power on o Mute button button Snooze button Play pause button Track back button Track forward button Tune up button Alarm 2 button Alarm 1 button Enter button Volume increase Volume decrease button button Tune down button Auto button Sleep button ALTEC LANSING Listening to Your iPod Dock your iPod in the Altec Lansing Moondance Home speaker system Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote iPod mode will be automatically selected Press the Pll button on your iPod or wireless remote Music from your iPod will start playing The speaker system s wireless remote is capable of controlling basic functions of 3rd generation iPod models and the iPod touch Adjust the volume Use the VOLUME and VOLUME buttons on the Altec Lansing speaker system to adjust
5. system or the VOLUME and VOLUME buttons on the wireless remote to adjust the hour setting Be sure to take note of the AM PM setting if you selected 12 Hour Clock mode when setting the clock Then press the ALARM1 button to save this setting and enter the Alarm Minute Set mode 4 Adjust the minute Use the 7 and 7 buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to adjust the minute setting Then press the ALARM1 button to save this setting and enter the Alarm Volume mode 5 Setthe alarm volume Use the 7 and 7 buttons on your speaker system or the Setting the Alarm VOLUME and VOLUME buttons on the wireless remote to set the alarm volume Then press the ALARM button to save this setting and enter the Alarm Source mode 6 Setthe alarm source Use the and gt buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to select the alarm source iPod FM or AUX Then press the ALARM1 button to save this setting and enter the Alarm Daily Frequency mode NOTE If you wish to wake up to a specific song on your iPod dock your iPod on the speaker system select the song on your iPod and then select iPod as your alarm source If you have selected FM as your alarm Source the alarm will play the last radio station selected 7 Select the alarm daily frequency Use the 7 and 7 buttons on your speaker system or the VOLUME and
6. the battery holder correctly Make sure the polarity the 4 and sides of the battery is correct as illustrated on the inside of the door Placing and Removing Adapters for the iPod Your Altec Lansing Moondance Home speaker system includes removable adapters for today s popular iPod models These adapters ensure that your iPod properly fits in the speaker system s dock As new iPod models are introduced new adapters will be made available to customers You may also use the adapters supplied with your iPod or available for purchase at www apple com How to Place an Adapter 1 Select the correct adapter for your iPod Using the correct adapter ensures a proper fit for your iPod 2 Gently press the adapter into the dock Now you can carefully place your iPod into the dock NOTE Your iPod cannot be in a case or a skin How to Remove an Adapter 1 Remove your iPod 2 Grip the adapter and pull gently upward Speaker Features and Indicators Universal docking station for iPod Snooze LCD brightness increase button Snooze LCD brightness decrease button Source button Alarm 2 button Sleep button Alarm 1 button Standby button Time button Volume increase button LCD display Volume decrease button ALTEC Power jack Auxiliary input connector CE i FM antenna Spea
7. the system volume Or use the VOLUME and VOLUME buttons on the wireless remote Find your desired song Press the PPI or I button on the wireless remote to go to the next or previous track Press and hold the Plor I button on the wireless remote while track is playing for high speed forward or reverse music search of the current track Charging Your iPod Whenever your iPod is docked and your Altec Lansing Moondance Home speaker system is plugged into an AC outlet your iPod is charging until fully charged even if the speaker system is switched off 11 12 Listening to the FM Radio 1 Plug the FM radio antenna into the speaker system s FM ANTENNA jack The jack is located on the back of the system 2 Extendthe FM antenna wire fully for best FM reception Also do not strip alter or attach to other antennas S Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote 4 Select FM mode Press the SOURCE button on your speaker system or the SOURCE button on the wireless remote until the FM appears on the LCD 5 Tune to the station you want to listen to Use the TUNE and TUNE buttons on the wireless remote to tune in the desired station Press and hold these same buttons for 3 seconds to find the next clear FM station Press and hold the AUTO button on the wireless remote for 3 seconds to automatically tune and sa
8. ALTEL LANSING Altec Lansing Moondance Home Digital Speaker System and Alarm Clock for iPod M302 User Guide Welcome Thank you for purchasing the Altec Lansing Moondance Home speaker system Designed specifically to work with your iPod this system provides high quality audio and radio performance that brings out the best in your music This Altec Lansing speaker system is designed to work with e iPod touch iPod with video iPod nano 3rd generation iPod nano 1st generation iPod classic iPod with color display iPod nano 2nd generation iPod mini Please carefully read this User Guide for instructions on setting up and using your speaker system Prior to installing or operating the Altec Lansing Moondance Home speaker system refer to the important product safety information below Getting Assistance Altec Lansing Technical Support is ready to assist you You can find answers to frequently asked questions ask a question using email receive service over the Internet or speak directly with a representative Call 1 866 570 5702 or visit www alteclansing com Registering Your Product Visit www alteclansing com to register your product online so we can provide you with the best possible service and technical support FCC Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device comp
9. E NATERA A TE ESA RENEA 17 Troubleshooting m iwl C G stomer ServiCe 5 12 1 etin a banane Ee ka A SER UER 2 e AR RO a CE DRY AREE Ea ERR ERA SE Ia FER Ka E EE a EEEn sacs LER Oba Ya Eva aH EAX a A3 FRA EVE Ya a ARMIS EFE A ARR REED ERI AR 20 Package Contents User Guide and Quick Connect Instructions Altec Lansing Moondance Home speaker system Wireless remote Miscellaneous adapters for iPod AC adapter FM radio antenna C9 gt Q ere Getting Started How to Install the AC Adapter S Close the battery compartment door Swing the door shut and then slide it in the opposite direction of the arrow until it clicks 1 Connect the AC adapter cable plug into the speaker system s power jack f The jack is located on the back of the NOTE Please discard used batteries properly system and labeled POWER 2 Plug the AC adapter into a wall outlet How to Install the Wireless Remote Battery The wireless remote battery included is not installed at the factory To install the battery follow these steps 1 Open the battery compartment door The battery compartment door is located on the back end of the remote Simply slide the door in the direction of the arrow until it clicks and then swing the door open 2 Position the battery included so it sits in
10. Portable Audio Device If you have a non iPod MP3 player or other non docking portable audio device you can enjoy it through your Altec Lansing Moondance Home speaker system as well Just connect it via the AUX IN jack Here s how 1 Locate a 3 5 mm stereo cable not included Plug one end of the stereo cable into your device Your device should have either a headphone or LINE OUT jack for you to plug into Plug the other end of the stereo cable into your speaker system s AUX IN jack The AUX IN jack is located on the back of the unit Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote Select AUX mode Press the SOURCE button on your speaker system or the SOURCE button on the wireless remote until the AUX appears on the LCD Turn on your device and start it playing 7 Adjust the volume Use the VOLUME and VOLUME buttons on the Altec Lansing Moondance Home speaker system to adjust the system volume Or use the VOLUME and VOLUME buttons on the wireless remote NOTE You may need to adjust the device volume also Your device s volume should be set to approximately 34 volume 8 When you are finished listening to your portable audio device please remember to turn both it and your speaker system off to conserve electricity 18 14 Setting the Clock Display How to Set the Clock Time and D
11. What Is the Period of Coverage For units purchased in the European Union or Asia this warranty runs for two years from the date of purchase For units not purchased in Europe or Asia this warranty runs for one year from the date of purchase The term of any warranties implied by law shall expire when your limited warranty expires Some states and or Member States in the European Union do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you What Does the Warranty Not Cover This warranty does not cover any defect malfunction or failure that occurs as a result of improper installation misuse or failure to follow the product directions abuse or use with improper unintended or faulty equipment For information on proper installation operation and use consult the manual supplied with the product If you require a replacement manual you may download a manual from www alteclansing com Also consequential and incidental damages are not recoverable under this warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you What Will Altec Lansing Do to Correct the Problem Altec Lansing will at its option repair or replace any product that proves to be defective in material or workmanship If your product is no longer being manufactured or is out of stock at its option Altec Lansing may rep
12. and to the extent valid and enforceable under the applicable law Customer Service The answers to most setup and performance questions can be found in the Troubleshooting section of this guide You can also consult the FAQs in the customer support section of our Web site at www alteclansing com If you live in North America and still can t find the information you need please call our customer service team for assistance before returning the speakers to your retailer under their return policy Tel 800 258 3288 Email csupport alteclansing com If you live outside of North America please visit our Web site at www alteclansing com and select your region to locate your country s distributor For the most up to date information be sure to check our Web site at www alteclansing com International customers For information regarding the distribution of Altec Lansing products in your country please visit www alteclansing com and click on your region DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste han
13. ate Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote Press and hold the TIME button for 3 seconds The TIME button is located on the top of your Altec Lansing speaker System This action puts you in the Time Date Set mode Select either 12 Hour or 24 Hour Clock mode Use the and buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to select either 12 Hour or 24 Hour Clock mode Then press the TIME button to save this setting and enter the Year Set mode Set the year Use the 7 and 7 buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to select the year Then press the TIME button to save this setting and enter the Month Set mode Set the month Use the 7 and 7 buttons on your speaker system or the VOLUME Fand VOLUME buttons on the wireless remote to select the month Press the TIME button to save this setting and enter the Date Set mode 6 Setthe date Use the and 7 buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to select the date Press the TIME button to save this setting and enter the Hour Set mode 7T Setthe hour Use the 7 and T buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to adjust the hour Be sure to take
14. dling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office or your household waste disposal service ALTEL LANSING www alteclansing com HEADQUARTERS 535 Rte 6 amp 209 Milford PA 18337 0277 800 ALTEC 88 570 296 4434 Fax 570 296 6887 EUROPE 13 Rue Beaumont L 1219 Luxembourg Luxembourg ASIA PACIFIC 23 F Office Tower Shun Hing Square Diwang Commercial Centre 5002 Shen Nan Dong Road Shenzhen China 518008 Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards 2008 Plantronics Inc All rights reserved ALTEC ALTEC LANSING the Altec Lansing logo the horn design Moondance and M302 are trademarks or registered trademarks of Altec Lansing a division of Plantronics Inc Plantronics the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics Inc iPod is a trademark of Apple Inc registered in the U S and other countries eS All other trademarks appearing herein are the property of their respective owners Designed by Altec Lansing in the USA Made in China A13371 R02
15. docked when the alarm goes off the buzzer alarm will sound instead NOTE If the iPod FM radio or AUX IN is playing when the alarm goes off and a different alarm source has been selected the speaker system will Switch to the selected alarm source How to Set Alarm 2 Repeat the above steps substituting Alarm 2 for Alarm 1 How to Use Alarm 1 1 Press the ALARM button on either the speaker system or the wireless remote This activates the alarm The Alarm 1 icon in the upper left hand corner of the LCD display will light and the alarm time will display in the lower right hand corner of the display 2 When the clock times matches the alarm time the alarm sounds the Alarm 1 icon flashes and the whole display flashes The alarm gets progressively louder until it reaches the set level After a total of 59 minutes the alarm will silence itself S Todismiss the alarm press the ALARM1 or ALARM2 buttons on the speaker system or the ALARM1 or ALARM buttons on the wireless remote 4 To disable the alarm before its time is up press the Alarm1 button How to Use Alarm 2 Repeat the above steps substituting Alarm 2 for Alarm 1 How to Use the Snooze Feature Press the SNOOZE button once to silence the alarm for a period of 5 minutes Setting the Sleep Timer Your Altec Lansing speaker system is equipped with a sleep timer that automatically turns off the unit 30 60 90 or 120 minutes after it has been set How t
16. ker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall See the Getting Started section for more information Momentarily press the STANDBY button Increase LCD display brightness Press the 77 button to brighten the LCD display a Decrease LCD display brightness Press the lt button to dim the LCD display Y Change audio source Press the SOURCE button to cycle through and select the audio source iPod FM or AUX NOTE If you are in FM or AUX mode and you dock your iPod the speaker system will automatically change to iPod mode NOTE If you are in iPod mode and playing your iPod changing audio sources will automatically pause your iPod NOTE If you are in FM mode pressing the SOURCE button once will have no effect You will need to press it a second time to change the audio source Turn up the volume Press the VOLUME button Press and hold the button to quickly adjust the volume Turn down the volume Press the VOLUME button Press and hold the button to quickly adjust the volume Recall preset FM station In FM mode press the SOURCE button to activate the preset selection feature The FM source icon will flash Press the 77 or buttons to select the desired preset station See the Listening to the Radio section for additional information Listen to a non docking iPod or MP3
17. lace your product with a similar or better Altec Lansing product How to Get Warranty Service To get a covered product repaired or replaced you must contact Altec Lansing during the warranty period by email csupport alteclansing com You must include in your email your name address email address telephone number date of purchase and a complete description of the problem you are experiencing In the United States you may alternatively contact Altec Lansing by telephone at 1 800 ALTEC88 Please be prepared to provide the same information If the problem appears to be related to a defect in material or workmanship Altec Lansing will provide you a return authorization and instructions for return shipment Return shipments shall be at the customer s expense and the return must be accompanied by the original proof of purchase You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing How Will State Law Affect Your Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state Please note that in the European Union you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing s goods Those rights are not affected by this guarantee The above limited warranties and remedies are sole warranties and remedies available to purchaser if
18. lies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of A un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons CAUTION To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure WARNING To IM Ie ak O N o reduce the risk of fire or electric shock do not expose this appliance to rain or moisture PORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions The apparatus should not be situated on a bed sofa rug or similar surface that may block the ventilation openings The apparatus mu
19. note of the AM PM setting if you selected 12 Hour Clock mode Then press the TIME button to save this setting and enter the Minute Set mode 8 Setthe minute Use the and buttons on your speaker system or the VOLUME and VOLUME buttons on the wireless remote to adjust the minute 9 Exitthe Time Date Set mode Press the TIME button on the speaker system or the ENTER button on the wireless remote to exit the Time Date Set mode The speaker system will also automatically exit the Time Date Set mode after 5 seconds of inactivity NOTE The clock is always displayed either in the main part of the LCD or in the lower right hand corner if you are interacting with the speaker system NOTE This Altec Lansing Moondance Home speaker system features a built in backup battery system to provide continuous clock settings in the event of a power failure If a power failure occurs or the AC cord is accidentally disconnected the display will not remain lit and the alarm will not function but the current time will be maintained Your Altec Lansing speaker system has two separate alarms How to Set Alarm 1 1 Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote 2 Press and hold the ALARM1 button for 3 seconds This puts you in the Alarm Set mode for alarm 1 S Adjust the hour Use the 7 and buttons on your speaker
20. o Set the Sleep Timer 1 Ensure your speaker system is powered on If the system isn t on press the STANDBY button on the speaker system or the button on the wireless remote 2 Pressthe SLEEP button This puts you in the Sleep Timer mode S Selectthe sleep duration Press the SLEEP button to cycle through the available sleep duration times O 30 60 90 and 120 minutes Selecting O minutes is the equivalent of turning the sleep function off 4 Exitthe Sleep Timer mode The speaker system will automatically exit the Sleep Timer mode after 5 seconds of inactivity Or press the ENTER button on the wireless remote to exit the Sleep Timer mode Maintaining Your Speaker System Place your speaker system on a level surface away from sources of direct sunlight or excessive heat Protect your furniture with a cloth or other protective material when placing your speaker system on a natural wood or lacquered finish Clean your speaker system with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit 17 Troubleshooting Symptom Possible Problem Solution Speaker system doesn t respond no power AC adapter isn t plugged into a wall outlet or the connector isn t plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector in
21. on to avoid injury from tip over Contents Mee fee HP ii I AMCwm 1 Package Contents x nacti cider dass cvaceicv etl c ese pu RAEN A EEA S ea EES dun ket Lea iuda e Re rae eE EATS EEP Xl Te etu a NPESE EEY 3 Getting Started eriin PUEDES Placing and Removing Adapters for the iPod Speak r Features and Indicator Siepen Ije zicgeegere T M 7 Wireless REMOte Features ss e diei rait ir nE Ear ATEREA TERA TRE THE FEAT RESOR Ea AASP SFO EAA A EA EAER ESA A XAR ERR de aA 9 LIStEMING TO YOUN IP OO E H 11 GMArGinG YOUR POG m 11 Listening to the FM Radio cccccceesseeeseeeeeeeeeeeeeneeeeeeneeeeesaeees a12 Listening to a Non docking iPod or Other Portable Audio Device nnne nennen nnne retentis 13 Seting the Coek Display eneen MHR M 14 Setting the Alarm Setting the Sleep Timer Maintaining Your Speaker SyStelm caissssziscsssacececesesoaprasensceeaepesnarssrenacqencservsasvadnesanaen EATE EEA AA aA EAS E
22. player See the Listening to a Non docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system s AUX IN connector View the date Momentarily press the TIME button to display the year Press the TIME button again to display the month and day Press the TIME button again to display the day of the week Speaker Controls Set the time See the Setting the Clock Display section for detailed instructions on setting the clock Set the alarms See the Setting the Alarm section for instructions on setting the alarms Dismiss the alarm Press either the ALARM1 or ALARM2 button when the alarm is sounding Snooze for 5 minutes Press the SNOOZE SNOOZE Y or button when the alarm is sounding Sleep See the Setting the Sleep Timer section for more information on the SLEEP button Wireless Remote Features The wireless remote lets you operate many functions of your Altec Lansing Moondance Home speaker system Turn on your speaker system Momentarily press the button Change audio source Press the SOURCE button to cycle through and select the audio source iPod FM or AUX NOTE If you are in FM or AUX mode and you dock your iPod the speaker system will automatically change to iPod mode NOTE If you are in iPod mode and playing your iPod changing audio sources will automatically pause your iPod
23. st not be placed in a built in installation such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings Ventilation should not be impeded by covering the openings with items such as newspapers tablecloths curtains etc Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 No naked flame sources such as lighted candles should be placed on the apparatus Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution To prevent the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel 11 12 18 14 15 16 17 18 Safety Information A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for the replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs
24. to the power supply jack on the back of the speaker system Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPod doesn t dock properly Using the wrong adapter for iPod or no adapter Make sure the dock adapter is the proper fit for your iPod iPod didn t install properly Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod Then reseat it in the dock iPod doesn t respond to the speaker system iPod is not installed properly Your iPod software is too old Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod Then reseat it in the dock Upgrade software on your iPod For details visit www apple com ipod download iPod is locked up Please make sure your iPod is working properly before docking into the unit Please refer to your iPod manual for details Using 1st or 2nd generation iPod iPod shuffle or other devices Your speaker system cannot control those iPod models or other devices 18 Troubleshooting Symptom Possible Problem Solution iPod didn t charge iPod is not installed properly Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod Then reseat it in the dock iPod is locked up Please make sure your iPod is working properly before docking in
25. to the unit Please refer to your iPod manual for details AC adapter isn t plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into the supply jack on the speaker system Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If the iPod original sound source MP3 is of poor quality distortion and noise are easily noticed with high power speakers Try a different audio source such as a music CD Wireless remote doesn t work Battery is weak Replace current battery with a new battery Wireless remote is not pointed toward the speaker system Point the wireless remote toward the Altec Lansing speaker system and move within 10 feet of the unit No sound from the AUX IN device such as an MP3 player or CD player connected to the AUX IN jack Volume on the device is set too low Increase the volume on the device to approximately 94 full volume Source selector is not set to Aux Out Set source selector to Aux Out 19 20 Warranty ALTEC LANSING TECHNOLOGIES INC ONE YEAR LIMITED WARRANTY TWO YEAR LIMITED WARRANTY IN THE EUROPEAN UNION AND ASIA What Does the Warranty Cover Altec Lansing warrants that its products shall be free from defects in materials or workmanship with the exceptions stated below
26. ve all clear FM stations 6 Adjust the volume Use the VOLUME and VOLUME buttons on the Altec Lansing Moondance Home speaker system to adjust the system volume Or use the VOLUME and VOLUME buttons on the wireless remote NOTE Extend the FM antenna wire fully for best FM reception Also do not strip alter or attach to other antennas How to Store Preset Stations Your Altec Lansing Moondance Home speaker system s wireless remote enables you to program up to 16 FM station presets 1 Ensure your speaker system is powered on 2 Make sure you are in FM mode S Tueto the station you wish to store 4 Store the station Press the ENTER button on the wireless remote A preset location will show and begin to flash The station stored in that preset will be displayed in the lower right hand corner of the LCD display Use the VOLUME and VOLUME buttons on the wireless remote to select the preset location you want to store the station in Press the ENTER button to store the station in the preset location You can store one FM station in each preset location 5 Tostore other preset stations repeat the above steps How to Recall Preset Stations 1 Ensure your speaker system is powered on 2 Make sure you are in FM mode S Use the PPI and 144 buttons on the wireless remote to select the desired preset The radio will tune to your preset station 4 Adjust the volume Listening to a Non docking iPod or Other
Download Pdf Manuals
Related Search