Jwin JV-TV7070 5.5 in. Portable Television
Contents
1. to select the SKIP menu 14 Press or button to set it ON 15 Press button to select the SEARCH menu 16 Press or button for channel search and find desired station for channel 2 Press wait and see repeatedly to find desired channel If displayed screen does not match the desired channel press button again 17 Once the desired station is up press the MEMORY button several times and select the best picture and wait a couple of seconds 18 Press MENU button again 19 Press or button to select POSITION menu 20 Press or button to select the next desired channel Ex CH4 or CH 5 21 Repeat above number from 15 to 21 Channels 2 6 VHFL 7 13 VHFH 14 83 UHF COLOR AUTO SOUND M SELECT ADJUST2. Important Notice Please read the following instructions carefully before using your TV 1 This unit requires one time channel setting procedure before using You can select either Automatic method which assigns random channel number to the station it catches Or you can select Manual method which you can set desired channel numbers to corresponding stations in your local area 2 You may find the adapter and the TV hotter than other small TVs However it is not a sign of defect rather it is normal 3 If you want connect to external Ant Or Cable for better reception you need following F to PAL antenna adapter Not Included Auto Channel Setup 1 Connect power adapter to the TV 2 You ll see the red light in front of the TV at the bottom 3 Press the blue POWER button on the main unit 4 On the remote control press the red POWER button Wait 2 3 Sec 5 Once the TV is on Press SYS button on the remote control 6 You need to check the COLOR amp SOUND modes in the display 7 If the entries are different from above please adjust them by pressing or button after selecting the menu If correct Press SYS button to return to channel 8 Press MENU button twice 9 Press or button to select AUTO MEMORY 10 The color of the selected menu will change from green to red 11 Press the button for run the AUTO CHANNEL MEMORY on the s
3. creen 12 It will take approximately 10 minutes or more to scan the signal and assign channel numbers to the available stations randomly 13 Your TV is now ready COLOR AUTO SOUND M SELECT ADJUST Manual Channel Setup The channel setup must be done manually in order to set channel numbers match the stations in your local area It requires about 20 minutes to complete manual channel setup 1 Connect power adapter 2 Make sure the red light is on in front of the TV at the bottom 3 Press the blue color POWER button on the main unit 4 Press POWER button on the remote control Wait 2 3 Sec 5 Press SYS button on the remote control 6 You need to check the COLOR amp SOUND modes of display 7 If the entries are different from above please adjust them by pressing or button after selecting the menu If correct Press SYS button to return to channel Press MENU button twice 8 Press or buttons for the select POSITION menu 9 The color of the selected menu will change from green to red 10 Press or button to select the channel number 02 or desired channel number 11 Press buttons to select the BAND menu 12 Press or button to change and set to VHFL for channels between 2 to 6 For channels between 7 to 13 select VHFH Over the channels 14 select UHF 13 Press button
Download Pdf Manuals
Related Search