Yamaha RP-U200 5.1 Channels Receiver
Contents
1. Front panel Remote control vee vee qe 3 Select an input source by using the input selector keys The corresponding indicator on the front panel lights up AUX2 Press AUX2 key to select m M the equipment connected to NS the ANALOG AUX 2 IN A c connectors as the input CI source auxe or TUNER Press the TUNER key to select the built in FM tuner as axe CI the input source TUNER When the TUNER key is pressed TUNER appears tuner first on the display and then changes to the display of Front panel Remote control a frequency or a preset station Refer to the explanation on the right side for details about Mut vei di ni er a lt gt using the input selector keys BASIC OPERATION When the PC AUX1 or AUX2 input selector key is pressed the display shows the name of the selected input source for a short while and then shows the currently selected sound field program When no sound field program is selected THROUGH is shown on the display The names of input sources shown on the display can be changed with the Application Software Refer to the Online Help of the Application Software for details To cut off sound output temporarily Press the MUTE key To restore sound output turn the volume control on the front panel or press the VOLUME keys on the remote control Pressin2. Input selectors amp indicators These four keys explained below are used to select the input source The indicator of the selected source lights up e PC key This key selects your computer as the input source Pressing this key repeatedly selects the signals received at the USB digital DIGITAL PC COAX IN or DIGITAL PC OPT IN or analog ANALOG PC IN input The DIGITAL PC OPT IN has priority over the DIGITAL PC COAX IN so if you connect to both inputs the signal received at the DIGITAL PC OPT IN is used Remote control HALL JAZZ CHURCH GAME MOVIE amp YAMAHA AUX1 key This key selects the equipment connected to the ANALOG AUX 1 IN or DIGITAL AUX 1 OPT IN connector as the input source Pressing this key repeatedly selects the digital or analog input AUX2 key This key selects the equipment connected to the ANALOG AUX 2 IN connectors as the input source e TUNER key This key selects the built in FM tuner as the input Source If the tuner is already selected this key toggles the reception mode between FM auto stereo and FM monaural CONTROLS AND THEIR FUNCTIONS Display The display shows various settings selected input source sound field program and various other information DSP key front panel ON OFF key remote control This key activates the sound field programs produced by the internal DSP P SET
3. 4 Press lt or gt repeatedly until the desired number of channels is shown on the display a gt HELL Front panel 5 Hold down the PC input selector key until the following indication appears on the display MZ es TN Aux AUX2 TUNER Q Front panel The number of The number of channels before the channels after the change change Although no further operation is required wait a short time until the computer completes the changes in the settings When the number of channels is changed for the first time the device driver for the USB audio is installed in the computer Wait a short time until the computer completes the changes in the setting Do not change the USB channel setting under any circumstance during playback or recording via the USB connection on the computer If changed the computer may freeze NOILVH3dO Q39NVAGV E 21 ADVANCED OPERATION Operating this unit with the Application Software If this unit is connected to your computer via the USB connection and the Application Software is installed in your computer from the supplied CD ROM you can operate this unit with the Application Software from your computer Moreover the Application Software once installed on your computer offers various settings unavailable from this unit or the remote control For instructions on how to install the Application Softw
4. Active program The following programs are available Program Feature Note g HALL CONCERT HALL This program simulates the sound field of a medium These programs create a sound EUROPE sized hall with a beautiful and rich reverberation field that feels real just as if you 8 JAZZ JAZZ CLUB This program simulates the sound field of a famous Were actually there VILLAGE GATE New York jazz club Ew CHURCH CHURCH This program simulates the sound field of a Gothic iz ROYAUMONT church with the unique effect of sound reverberating back and forth in a domed ceiling GAME GAME This program adds depth and surround effects to These programs can be used AMUSEMENT computer games enhancing the gaming experience together with Dolby Pro Logic MOVIE MOVIE THEATER The realism provided by this program gives the Dolby Digital or DTS for enjoying surround sounds of motion LIVE LIVE CONCERT This program produces an enthusiastic atmosphere ile and lets you feel that you are in the midst of the action as if attending an actual jazz or rock concert impression that you re actually in the scene This program enables you to enjoy a virtual 3D effect with NORMAL 00 DTS SUR This program reproduces the surround sound of a headphones When you HP3D Headphone 3D Source encoded with Dolby Pro Logic Dolby Digital connect headphones to this or DTS faithfully Sensing the input signa
5. MANUAL or Front panel Remote control The reception mode changes alternately by each press of the TUNER key FM auto stereo When a stereo broadcast is received it is received in stereo automatically The ST indicator lights up on the display If however the signal of a stereo broadcast is weak it may be received in monaural automatically In this case the ST indicator goes off FM monaural Any broadcast is received in monaural On the display M appears above the frequency If you hear noise in the FM auto stereo mode try switching to FM monaural FM monaural FM auto stereo E 14 LISTENING TO AN FM BROADCAST 4 Press the lt J or gt key and keep it pressed for one Manual tuning second or more First turn on this unit 1 Press the TUNER input selector key to select the built in FM tuner Pc PC Front panel Remote control AUX1 AUX2 or Press the lt key to search for lower frequencies and the Lo aue CI gt key for higher frequencies When a station with a strong TUNES signal is found the search stops and the station is received If no station with a strong signal is found the search stops Front panel Remote control after searching through all frequencies 5 ifthe received station is not the desired one 2 Ifthe tuner is in the preset tuning mode press the repea
6. Use the remote control for adjusting the speaker output levels at the listening position 2 When the test tone is outputted from the left L ch or right R ch front speaker Use the VOLUME keys on the remote control to adjust the volume of each speaker In this step adjust the volume balance between the left and right front speakers Adjustable range 10 to 0 VOLUME gt Remote control 3 When the test tone is outputted from the center speaker Cch Use the VOLUME keys on the remote control to adjust the center speaker output level Make the sound output level of the center speaker about the same as the left or right front speaker Adjustable range 20 to 10 lt VOLUME gt Remote control 1 Press the TEST key on the remote control c m lt TEST Ap Remote control 4 When the test tone is outputted from the left Ls as ch or right Rs ch surround speaker om 20 Use the VOLUME keys on the remote control to adjust the volume of each speaker Make the sound output level of the surround speakers You will hear a test tone so called pink noise from each speaker for about two seconds in the following order about the same as the front speakers Lch Cch Rch Adjustable range 20 to 10 Front speaker L Center speaker Front speaker R lt VOLUME gt T Ls Rs lt Remote control Surround speaker L Surround speaker
7. Note that some operating systems and software programs are not multi channel compatible Yamaha websites list the names of multi channel compatible operating systems and software MacOS9 04 9 1 etc does not support this feature Only the two channel mode can be used Some versions of Windows also do not support the six and or four channel modes You can refer to the following Yamaha website for details and related information http www yamaha co jp audio When the six channel mode is selected recording cannot be made to the computer To record select the two or four channel mode E 20 How to set When playback or recording is performed on the computer via the USB connection terminate the playback or recording software used on the computer 1 Turn on this unit Front panel 2 Press the PC input selector key repeatedly until USB appears on the display S TIN Aux AUX2 Front panel TUNER 3 Hold down the PC input selector key until the current channel setting is shown for about two seconds WL TN Aux AUX2 TUNER Front panel When the display of this unit shows USB in red USB audio is being played back disabling this USB channel setting function Terminate the software used on the computer ADVANCED OPERATION
8. R Che speaker currently outputting the test tone is shown 5 When the adjustments are finished press the on the display TEST key TEST Remote control The test tone stops E 19 ADVANCED OPERATION When this unit is set to the Virtual 3D mode The output order of the test tone is as follows When using a center speaker Lch Ls gt Cch Front speaker 0 Virtual surround speaker L Center speaker Rs Rch Virtual surround speaker R Front speaker When not using a center speaker Lch Ls Rch Front speaker L Virtual surround speaker L Front speaker R t Rs Virtual surround speaker R Adjust the subwoofer level while listening to a suitable source With the supplied Application Software you can select the speakers to use and not to use Also by designating the size of the speakers to use this unit can be set to an output mode suitable for the ability of the speakers Setting USB channel Typical USB audio features multi channel modes such as four channel and six channel modes in addition to a normal two channel stereo mode This unit is compatible with each of these modes When a multi channel mode is selected you can receive the surround sound signals of computer games compatible with the 4ch Direct Sound 3D and the multichannel signals of DVD video on this unit via the USB connection and enjoy them in surround sounds
9. Surround Initial Delay Adjusts the initial delay time of the surround sound field This parameter can be adjusted only when the Speaker Settings of this unit has been set to two front and two surround channels or more and Dolby Digital or DTS encoded signals are inputted S Room Size Surround Room Size Adjusts the apparent size of the surround sound field Reverb Time Adjusts the duration of reverberations Reverb Level Adjusts the level of reverberations Reverb Delay Adjusts the delay time of reverberations NOILVH3dO Qq39NVAGV E 23 ADVANCED OPERATION Adjusting the speaker output levels and effect levels When the check box Use the surround speakers under Speaker Settings in the Setup panel is checked you can adjust the output levels of the available speakers respectively When the check box is not checked this unit is in the virtual 3D mode allowing adjustment of the virtual 3D effects See page 27 Select the SPEAKER tab at the bottom of the Main Panel The following screen appears E 24 Adjusting the output levels of the speakers You can adjust the output levels of the speakers which are set for use under Speaker Settings in the Setup panel Main SP Center SP LFE Bass Out L Level R Levef f level Delay I EH Adjusting the virtual 3D effect D Adjusting the output levels of the main speakers You can adjust the output level
10. YAMAHA PERSONAL RECEIVER RP U200 GOYAMAHA OPERATION MANUAL GO YAMAHA MANUEL D UTILISATION IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE IMPORTANT Please record the serial number of this system in the space below Model Serial No The serial number is located on the rear of the main unit Retain this Owner s Manual in a safe place for future reference o0 FP WD 10 11 12 13 14 Read these instructions Keep these instructions Heed all warnings Fo
11. zi O 2 LINN SIH L 30 ANITLNO 851041409 IN le eR NOLLVH3dO NOTEER LEER G39NVAGV 9ISva NOILVH3dO XIGNAddV 1 E CAUTION Read this before operating this unit 10 11 12 To assure the finest performance please read this manual carefully Keep it in a safe place for future reference Install this unit in a cool dry clean place away from windows heat sources sources of excessive vibration dust moisture and cold Avoid sources of humming transformers motors To prevent fire or electric shock do not expose the unit to rain or water Never open the cabinet If something drops into the Set contact your dealer Do not use force on switches controls or connection wires When moving the unit first disconnect the power plug and the wires connected to other equipment Never pull the wires themselves The openings on the unit cover assure proper ventilation of the unit If these openings are obstructed the temperature inside the unit will rise rapidly therefore avoid placing objects against these openings To prevent fire or damage install the unit in a well ventilated area Europe and U K models only To prevent fire or damage be sure to allow a space of at least 10 cm behind 10 cm on both sides and 10 cm above the top panel of the unit The voltage used must be the same as that specified on this unit Using this unit with a higher voltage than specified is dangero
12. P SET amp Front panel Remote control 2 Use the P SET or PRESET key to select the preset group and use the lt gt keys to select the preset number of the station you want to copy PRESET P SET or Front panel Remote control 5 Press the P SET key front panel or the MEMORY key remote control and keep it pressed for one second or more MEMORY P SET Front panel Remote control MEMORY lights up on the display for approx 2 seconds to show that the station has been copied and successfully stored E 18 ADVANCED OPERATION Adjusting the speaker balance This procedure lets you adjust the sound output level balance between the front center and surround speakers by using the built in test tone generator Make this adjustment so that each speaker output level is about the same when heard at the listening position This is important for high performance of the built in DSP Digital Sound field Processor the Dolby Digital decoder and the DTS decoder If this unit is set to the Virtual 3D mode the surround speakers are not used in the Application Software you can adjust the sound output levels of the speakers in the sound field of the Virtual 3D mode including two virtual surround speakers Refer to Setting adjustment on the Setup pane on page 27 This setting cannot be made by using the front panel controls or the remote control
13. Software The A mark shows that sound is outputted When using the test tone a red dot shows the channel currently outputting the test tone When using headphones only the two dots for the left and right front speakers appear regardless of the E 8 setting in Speaker Settings q EON Pcmoop DSP 8 st X o HE 12 BOPROLOGIC FM VOL INENEENE E EH eee 9 This indicator appears when an audio signal encoded with Dolby Digital is selected as the input source 190 ST This indicator appears when a stereo broadcast is received in stereo mode 17 OO DOLBY DIGITAL This indicator appears when an input signal is decoded with Dolby Digital 2 00 DOLBY PROLOGIC This indicator appears when an input signal is decoded with Dolby ProLogic 3 FM This indicator appears when the built in FM tuner is selected as the input source Multi information display Various messages and information appear here 5 VOL volume This indicator graphically displays the volume level setting The indicators elis 5 1CH and 00 will not appear when sound signals are decoded on the computer by using DVD playback software etc BASIC OPERATION Playing a source This section explains how to turn on this unit and select input sources If any external audio equipment is connected to this unit turn it on first 4 Start the selected input source Refer to Listening to
14. an FM broadcast on pages 14 18 YAMAHA 1 about how to tune into a desired station 5 Adjust the volume to the desired level lt VOLUME gt Front panel Remote control s you prefer use a sound field program Refer to page 11 for details about the sound field programs About the input selector keys e Each of the input selector keys selects the following input signals ud PC Press the PC key repeatedly to select the PC inputs 20 USB PC DIGT and PC ANLG PC DIGT selects do 7 Tumonthis unit the DIGITAL PC COAX IN or DIGITAL PC OPT IN and E PC_ANLG selects the ANALOG PC IN PONE Note The DIGITAL PC OPT IN has priority over the or DIGITAL PC COAX IN so if you connect to both inputs the signal received at the DIGITAL PC OPT IN is used Front panel Remote control The message Hello appears for a few seconds and this unit returns to the state in which it was last used e g the input source that was selected when this unit was turned off is selected 2 Decrease the volume to minimum MIN AUX1 Press the AUX1 key repeatedly to select the inputs CO CI AUX1 DG and AUX1 AN AUX1_DG selects the N or equipment connected to the DIGITAL AUX 1 IN and AUX1 AN selects the equipment connected to the ANALOG AUX 1 IN connector as the input source
15. could void your FCC authorization to use this product in the USA 3 NOTE This product has been tested and found to comply with the requirements listed in FCC Regulations Part 15 for Class B digital devices Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices This equipment generates uses radio frequencies and if not installed and used according to the instructions found in the users manual may cause interference harmful to the operation of other electronic devices Compliance with FCC regulations does not guarantee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the product OFF and ON please try to eliminate the Relocate either this product or the device that is being affected by the interference Utilize power outlets that are on different branch circuit breaker or fuse circuits or install AC line filter s In the case of radio or TV interference relocate reorient the antenna If the antenna lead in is 300 ohm ribbon lead If these corrective measures do not produce satisfactory results please contact the local retailer authorized to distribute this type of product If you can not locate the appropriate retailer please contact Yamaha Electronics Corp The above statements apply ONLY to
16. is possible However if the signal of the station you want to select is weak or the reception condition is bad you must tune in to it manually YAMAHA Auto tuning First turn on this unit 2 the tuner is in the preset tuning mode press the TUNER key front panel or the MANUAL key remote control to change the preset tuning mode to the frequency display mode MANUAL or Front panel Remote control 1 Press the TUNER input selector key to select the built in FM tuner Pc PC AUX1 AUX CT AUX2 or e AUX2 3GNESY TIN TUNER Front panel Remote control The tuner turns on in either of the following modes The mode which was selected the last time you used the tuner is selected Frequency display mode The display shows the m selected frequency This mode is for tuning into a station by changing the frequency Preset tuning mode This mode is for tuning into a vts FM ST preset station which is already stored in the memory The display shows the preset group A to E the number 1 U S A mode to 8 and the frequency of the preset station 3 Press the TUNER key front panel or the MANUAL key remote control to select the desired reception mode FM auto stereo or FM monaural
17. key front panel PRESET key remote control This key changes the display status of the built in FM tuner from the frequency display mode to the preset tuning mode If the tuner is already in the preset tuning mode each press of this key changes the group of preset stations A B C D E This key works only when the tuner is selected as the input source Down Up keys These keys are used for selecting sound field programs changing station frequencies selecting preset station numbers etc Q Volume control front panel lt 1 VOLUMES Down Up keys remote control These control and keys adjust the speaker and headphone volume The volume cannot be adjusted when this unit is in the standby mode lt Headphone jack Stereo headphones can be connected to this mini jack for private listening with Virtual 3D effects specifically tailored for headphone listening Power switch 6 front panel POWER key remote control Each click of this switch changes the status of this unit between standby mode and power on In the standby mode this unit can be turned on remotely from your computer using the supplied Application Software Note that this unit uses a small amount of power in the standby mode MEMORY key This key is used to store a desired station in the memory This key works only when the tuner is selected as the input source Sound field program selector keys Each of these keys
18. selects the corresponding sound field program TEST key This key is used to output a test tone The test tone is used when adjusting the volume balance among all speakers in the system including the virtual surround speakers Refer to page 19 for details Custom keys B These keys are available when this unit and your computer are connected with the USB cable and the supplied Application Software is installed on the computer Each of these keys can be programmed with a set of commands input selector sound field program volume setting etc by using the Application Software After storing simply pressing each key will execute the stored command Refer to the online help of the Application Software for details B MUTE key This key is used to cut off sound output temporarily Turning the volume control on the front panel or pressing the VOLUME keys on the remote control restores sound output Pressing this key again also restores sound output Sound output will also be restored by changing the status of this unit between standby and power on changing the input source or the sound field program and so on D MANUAL key This key changes the display status of the built in FM tuner from the preset tuning mode to the frequency display mode This key works only when the tuner is selected as the input source B Tuning lt gt Down Up keys These keys work in the following ways according to the sta
19. 3 This screen allows you to adjust the basic parameters Basic parameters Open the ADVANCED SETTING panel for adjusting the detailed parameters Effect Level Room Size Basic parameters Seat Position Opens the ADVANCED SETTING panel Effect Level Selects the level of effect sound from the three levels Room Size Selects the apparent size of the listening space from the three levels Seat Position Selects the simulated listening position from the three positions Effect Trim J G Initial Delay B Room Size Liveness Restores all parameters to their default values Restores the basic parameter screen Select a parameter by clicking its name and adjust the parameter by sliding the indicator at the bottom of the panel Detailed parameters Thefollowing parameters are available onthe ADVANCED SETTING panel Depending onthe selected program and input signals not all of the parameters can be adjusted Effect Trim Makes fine adjustment of the level of the overall effect sound Rear Effect Trim Makes fine adjustment of the level of the rear effect sound Initial Delay Adjusts the apparent distance from the sound source to the walls Room Size Adjusts the apparent size of the listening space Liveness Adjusts the apparent reflectivity of the walls Surround Delay Adjusts the delay time of the surround sound field S Initial Delay
20. Position Open this panel to change available settings in the Setup panel See page 27 for details on the Setup panel DSP selector You can directly select a DSP sound field program 8 Detailed setting screens Select one of the detailed setting screen tabs at the bottom of the current detailed setting screen The new detailed setting screen will be displayed where you can make detailed settings of the function DSP EDIT For adjusting the DSP sound field parameters See page 23 SPEAKER For adjusting the speaker output levels or the virtual 3D effect See page 24 D RANGE For adjusting the dynamic range See page 25 EQUALIZER For operating the graphic equalizer See page 25 Q POWER Each click changes the status of the main unit between standby and power on ADVANCED OPERATION Adjusting DSP sound field parameters You can adjust various parameters of the DSP sound field programs The default parameters of the sound field programs provide great sound but it is also possible to fine tune the How to adjust parameters 1 Select the program whose parameters you wish to adjust Parameter adjustment is effective for the currently selected program only parameters to suit the acoustics of the room individual 2 Select the DSP EDIT tab at the bottom of the Main preferences and program source Parameter adjustment Panel The basic parameter screen appears is required for each selected sound field program
21. R RL RR Typical surround system Virtual 3D Digital Sound Field Processing DSP When you listen to a performance in a concert hall jazz club or other live music venue you not only hear the direct sound coming from the musical instruments and singers but also the early reflections and natural reverberation Since the way you hear early reflections and reverberation depends on the shape and size of the building as well as the material and construction of the walls and ceiling each venue has its own unique sound called its sound field Early reflections are the initial sound waves that bounce off At Yamaha we have measured all the elements that make the floor ceiling and walls Natural reverberation is made up a typical sound field direction and level of the up of sound waves that gradually attenuate as they bounce reflections band width characteristics and delay times at repeatedly off multiple surfaces famous concert halls and opera houses around the world The information gained in this process has been converted into programs that can be reproduced using Yamaha s DSP technology Using its on board DSP this unit can process any audio source and recreate the atmosphere of the original venue Early sound reflections Reverberation Direct sound d CONTROLS AND THEIR FUNCTIONS Front panel amp Remote control Front panel G YAMAHA CINEMAZ
22. annel reproduces sound within a narrow frequency range Most video tapes and laser discs include Dolby Surround encoding as do many TV and cable broadcasts The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that stabilizes each channel for even more accurate sound positioning than is available with standard analog processors Dolby Digital Dolby Digital is a digital surround sound system that provides completely independent multi channel audio to you Dolby Digital provides five full range channels in what is sometimes referred to as a 3 2 configuration three front channels left center and right and two surround channels A sixth bass only effect channel is also provided for output of LFE low frequency effect or low bass effects that are independent of other channels This is called the LFE This channel is counted as 0 1 thus giving rise to the term 5 1 channels in total The wide dynamic range of sound reproduced by the five full range channels and precise sound orientation by digital sound processing provides listeners with excitement and realism that have never been experienced before DTS Digital Theater System Digital Surround DTS was developed to replace the analog soundtracks of movies with six discrete channels of digital soundtracks and it is now installed in many theaters around the world The DTS digital playback system changed the way we ex
23. are The Application Software extends the use of this unit with additional functions which cannot be used with the front panel keys or the remote control This manual introduces those functions by the following style Example Adjusting USB MIX LEVEL When an input other than the USB terminal is selected you can listen to the mixed sound signals from the selected input and from the USB terminal Also the mixing ratio of the signals from the USB terminal can be adjusted Referto the online help of the Application Software for details This manual also offers brief explanations about the functions available with the Application Software on page 22 27 Refer to the online help of the Application Software for details of how to use the functions computer This unit is a multimedia amplifier that brings you a new level of audio enjoyment This unit has a USB port for connection with a personal computer The USB interface allows remote control of this unit from your computer and control of sound data sent from your computer Equipped with a five channel power amplifier This unit has a five channel power amplifier for reproducing surround sound fields of Dolby Digital DTS and Yamaha CINEMA DSP effectively You can enjoy a full scale home theater sound simply by adding the optional Yamaha speaker system NS U40P and an optional subwoofer to this unit Equipped with Dolby Digital and DTS decoders This unit reproduces multicha
24. are see the separate SET UP MANUAL About the Main Panel This section briefly explains how to use the Application Software the setting screens and the available functions For further details refer to the Online Help of the Application Software The screen images shown in this section are of the basic screens for the Windows version The Macintosh version slightly differs in button arrangement etc The screen design functions etc are subject to change due to version upgrades The Main Panel allows you to perform the following basic operations Tabs are shown at the bottom of the detailed setting screen To make detailed settings of the desired function available from any detailed setting screen click on the tab for the function Display This section shows the current status of the volume input selectors sound field programs etc by characters Input selector The input selector allows you to directly change the input source Q volume control You can adjust the volume by dragging the indicator or by clicking the up A and down W arrows You can also alternately turn on and off the speakers by clicking the speaker icon below Changing the panel size You can minimize the size of the Main Panel Q Opening the tuner panel Press this button to open the tuner panel See page 26 for details on operating the FM tuner E 22 Effect Level S Room Size Seat
25. ay for approx 2 seconds to show that the station has been stored A newly stored station overwrites the previously stored one in the same preset group and number To abort storing the station press an input selector key except the TUNER key The selected input mode appears With the supplied Application Software you can use the auto preset tuning function in addition to the manual method The auto preset function searches for all stations available in your area and automatically stores them in the presets Also the Application Software allows you to assign a name to each preset station The names are displayed on the monitor when running the Application Refer to the online help of the Application Software for details LISTENING TO AN FM BROADCAST Recalling a preset station First turn on this unit and then select the built in FM tuner as the input source 1 Press the P SET key front panel or the PRESET key remote control to change this unit from the frequency display mode to the preset tuning mode PRESET P SET Front panel Remote control 2 Press the P SET key front panel or the PRESET key remote control repeatedly to select the preset group from A through E PRESET P SET YAMAHA Front panel Remote control 3 Press the lt key or th
26. bjects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped COMPLIANCE INFORMATION STATEMENT DECLARATION OF CONFORMITY PROCEDURE Responsible Party Address Telephone Type of Equipment Model Name This device complies with Part 15 of the FCC Rules Operation is subject to the following conditions 1 this device may not cause harmful interference and Yamaha Electronics Corp 6660 Orangethorpe Ave Buena Park CA90620 714 522 9105 Receiver RP U200 2 this device must accept any interference received including interference that may cause undesired operation See the user manual instructions if interference to radio reception is suspected FCC INFORMATION for US customers only 1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT problem by using one of the following measures change the lead in to coaxial type cable 6660 Orangethorpe Ave Buena Park CA90620 subsidiaries This product when installed as indicated in the instructions contained in this manual meets FCC requirements Modifications not expressly approved by Yamaha may void your authority granted by the FCC to use the product 2 IMPORTANT When connecting this product to accessories and or another product use only high quality shielded cables Cable s supplied with this product MUST be used Follow all installation instructions Failure to follow instructions
27. e gt key repeatedly to select the preset number from 1 through 8 a gt d 5 3 Front panel Remote control n n Wr 22 gt o Do 42 The station stored in the selected preset group and number is selected E 17 LISTENING TO AN FM BROADCAST Copying a preset station to a different group and number You can copy a preset station to a different group and number Using this function you can arrange preset stations in your favorite order or collect preset stations into genres GYAMAHA a m t mh A AS YAMAHA First turn on this unit and then select the built in FM tuner as the input source 3 Press the P SET key front panel or the MEMORY key remote control and keep it pressed for one second or more An arrow scrolls from right to left on the display MEMORY P SET Front panel Remote control 4 Use the P SET or PRESET key to select the preset group and use the lt gt keys to select the preset number you want to copy the station to PRESET P SET or Front panel Remote control 1 Press the P SET key front panel or the PRESET key remote control to change this unit from the frequency display mode to the preset tuning mode PRESET
28. eakers are positioned symmetrically 3 Head related Transfer Function adjustment You can make an adjustment to personal characteristics 4 Test tone You can output a test tone successively from the speakers at their current positions allowing setting and adjustment while listening to the tone
29. g the MUTE key again also restores sound output MUTE Remote control Sound output will also be restored by changing the status of this unit between standby and power on modes changing the input source or the sound field program using the test tone or using the A B C keys on the remote control When you listen with headphones Connect the headphones to the headphone jack No sound will be outputted from the speakers Q 7 E 10 When you have finished using this unit Set this unit to the standby mode by pressing the power switch on the front panel or the POWER key on the remote control POWER Front panel Remote control When not planning to use this unit for a long period i e vacation etc disconnect the AC power plug from the wall outlet Setting USB MIX When an input other than the USB terminal is selected you can listen to the mixed signals from the selected input and from the USB terminal Also the mixing ratio of the signals from the USB terminal can be adjusted Refer to the online help of the Application Software for details Setting graphic equalizer You can adjust the frequency characteristics as you prefer by using the 7 band graphic equalizer Refer to the online help of the Application Software for details Notes Some setting changes may be needed on the computer to reproduce signals sent from the computer to this unit via the USB connection Refer t
30. he colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED Making sure that neither core is connected to the earth terminal of the three pin plug For Canadian Customers To prevent electric shock match wide blade of plug to wide slot and fully insert This Class B digital apparatus complies with Canadian ICES 003 When this unit is turned off by pressing the power switch on the front panel or the POWER key on the remote control this unit turns into the standby mode In this mode this unit is designed to consume a small amount of power This unit s power supply is completely cut off from the AC line only when the AC power cord is disconnected OUTLINE OF THIS UNIT Main features of this unit Using Yamaha s unique DSP technology this unit can bring excitement and realism to any audio source by simulating Although this unit can be used as part of a typical hi fi gei b ada of a system connecting it to your computer via the USB andso Om WNIT Tess MS Verica design HS LONE SIONS terminal and running the supplied Application Software m to use et in EM allow
31. ions manually YAMAHA First turn on this unit and then select the built in FM tuner as the input source 1 inthe frequency display mode tune into the desired station and select the reception mode FM auto stereo or FM monaural Refer to pages 14 to 15 on how to tune into a station and select the reception mode 2 Press the P SET key front panel or the MEMORY key remote control and keep it pressed for one second or more MEMORY P SET or Front panel Remote control A preset group and a preset number appears and an arrow scrolls from right to left on the display This means that storing a station is possible vt U S A model Preset group Preset number E 16 3 Press the P SET key front panel or the PRESET key remote control repeatedly to select the desired preset group from A through E PRESET P SET 1 Front panel Remote control 4 Press the lt key or the gt key repeatedly to select the desired preset number from 1 through 8 gt gt Front panel Remote control 5 Press the P SET key front panel or the MEMORY key remote control and keep it pressed for one second or more MEMORY P SET Front panel Remote control MEMORY lights up on the displ
32. l the built in unit the 00 DTS SUR un piis Sil uad orthe DTS decoder program automatically automaeany WORS changes to HP3D When this unit is set to the Virtual 3D mode the surround speakers are not used in the Application Software 5 1 channel surround sound effects are reproduced with only two front speakers by using Yamaha s Virtual 3D technology CINEMA DSP for video sources 1 E 1 BASIC OPERATION Just after selecting a program the program name scrolls from right to left on the display and then its short version name lights up No sound field program can be used when receiving signals with a 96 kHz sampling frequency OOS Adjusting DSP sound field parameters The surround effect of each program or the Virtual 3D effect can be adjusted to the desired taste by using the Application Software Refer to the online help of the Application Software for details Recording Input sources e g a computer or CD player selected on this unit can be recorded by an MD recorder tape deck etc connected to this unit Also input signals can be fed to your computer via the USB connection When a source is recorded using a sound field program sound field effects are recorded with the source Recording on an external recording unit YAMAHA E 12 To turn off the sound field effect Press the DSP key on
33. llow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over LAL _ Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or o
34. nnel sources encoded with Dolby Digital or DTS faithfully by using the built in Dolby Digital and DTS decoders You can now experience the sound scale and the realistic sensation of actual theaters in your home The newly developed Yamaha Near Field Cinema DSP Digital Sound Field Processor Various DSP sound field programs allow you to select the program suitable for the selected input source You can experience the sound fields of famous concert halls movie theaters etc around the world in your home The DSP sound effects are also available for headphone listening Compatible with various USB audio functions This unit is compatible with the following audio signals received via a USB connection multi channel two four and six channels audio high quality digital audio of 24 bit 48 kHz and Dolby Digital encoded signals Some operating systems and software programs do not support this feature Various inputs outputs and easy operation This unit is equipped with various input and output terminals for both analog and digital signals making it ideal as a control center for other audio equipment such as a personal computer CD player and MD recorder The supplied remote control makes operation easy and the supplied Application Software allows control of this unit from your computer including detailed settings Compatible with Virtual Dolby Digital and DTS Virtual 5 1 By employing the Virtual 3D technology this unit reprod
35. o the separate SET UP MANUAL for details Some setting changes may be needed on the computer to reproduce signals sent from the computer to this unit via a sound card etc Automatic power saving function If there is no operation on this unit s front panel the remote control or the Application Software for about 24 hours with the power of this unit on this unit will automatically be set to the standby mode BASIC OPERATION Using sound field programs This unit s built in DSP Digital Sound field Processor can simulate various acoustic environments including a concert hall and movie theater with its seven sound field programs For the best results choose a program appropriate for the selected audio source First follow steps 1 5 of Playing a source on page 9 Front panel Pressing lt or D gt repeatedly changes the 7 Turn onthe DSP San When using the remote control ae step 1 can be Front panel skipped The name of the selected sound field program appears on the display 1 2 2 Select the desired sound field program HALL JAZZ CHURCH GAME MOVIE LIVE CL mans CL U mer Eth Cy YAMAHA mu Front panel Remote control DU do o 2 program Remote control Press the key of the desired program AA
36. perienced movies in theaters with six discrete channels of superb digital audio DTS technology through intense research and development has made it possible to deliver similar encode decode discrete technology to home audio surround sound entertainment DTS Digital Surround is an encode decode system which delivers six channels of master quality 20 bit audio technically it offers 5 1 channels which means 5 full range left center right and two surround channels plus a subwoofer LFE channel as 0 1 It is compatible with the 5 1 speaker configurations that are currently available for home theater Systems OUTLINE OF THIS UNIT Virtual 3D Surround sound typically requires several speakers Virtual 3D which is used by this unit s sound field situated in front of and behind the listening position which programs simulates the surround effect provided by requires a substantial amount of space that may not always surround and center speakers creating virtual surround be available speakers as shown so even with only two front speakers In addition to ordinary surround sound reproduction using you can still enjoy surround sound 4g several speakers this unit enables you to enjoy surround IG sound effects with only two speakers by using Yamaha s OF unique Virtual 3D three dimensional technology J0 mi FL C FR FL C FR 09 09 Virtual speakers RL R
37. s of the left and right main speakers 2 Adjusting the output level and the delay time of the center speaker You can adjust the output level and the delay time of the center speaker 8 Test tone Click on Test tone to output the test tone from the respective speakers in turn You can adjust their levels while listening to the test tone On the figure of the speakers at the center of the screen the speaker currently outputting the test tone is indicated Adjusting the output levels of the surround speakers You can adjust the output levels of the left and right surround speakers 5 Adjusting the LFE output levels You can adjust the output level of the LFE Low Frequency Effect sounds reproduced when playing a Dolby Digital or DTS encoded source The levels can be adjusted for Dolby Digital and DTS respectively The surround sound effect of the virtual 3D sound field is affected by the room configuration the position of the front speakers and the position of the listener resulting in sound unique to each environment The procedure below shows you how to adjust the effect of the virtual 3D to suit your preferences and environment Select the VIRTUAL tab at the bottom of the Main Panel The following screen appears POWER D Balance adjustment You can adjust the volume balance between the right and left speakers 2 Virtual surround speaker position setting You can set the position of the virtual surround speakers the sp
38. s you to remotely control this unit from your computer UNET DUC COH Ol p ayer SUA MC NIS and make some adjustments and settings shown below O LINN SIHL 30 ANITLNO FM antenna This unit GOYAMAHA CD player CT etc Personal computer I I Jersey pur a Subwoofer Surround speaker L Center speaker Surround speaker R Refer to the separate SET UP MANUAL for connections M OUTLINE OF THIS UNIT Dolby Digital and DTS This unit features a built in Dolby Digital decoder and a DTS decoder for reproducing surround sounds of sources encoded with Dolby Digital or DTS With such state of the art technologies this unit can bring the same audio experience to your home as they have brought to feature films in quality theaters around the world Take some time now to read more about these features and enjoy the new experiences this system brings to your home theater Dolby Surround Dolby Surround uses four discrete channels and five speakers to reproduce realistic and dynamic sound effects two main channels left and right a center channel for dialog and a surround channel for special sound effects The surround ch
39. set to six recording cannot be made via the USB connection Reset the number of USB channels to two or four To record digital input signals with a 48 kHz sampling frequency the frequency of the input signals must be 48 kHz record sound signals received at an analog or digital input of the sound card etc and not via the USB connection select the corresponding device such as Sound Card from Preferred device of Recording or Sound Recording on the computer The sampling frequency and resolution of signals recordable on the computer differ from operating systems You can refer to the following Yamaha website for details about the related information http www yamaha co jp audio YAMAHA Please check the copyright laws in your country before recording compact discs radio etc Recording of copyright material may infringe copyright laws You cannot make a recording from a CD R MD etc which is a copy of an audio CD to another CD R MD etc via the USB connection or the digital terminal connection Also you cannot make a recording from an MD which is recorded with digital signals received via the USB connection to another MD via a digital connection E 13 LISTENING TO AN FM BROADCAST Tuning into an FM station Normally if station signals are strong and there is no interference quick auto tuning
40. t step 4 TUNER key front panel or the MANUAL key remote control to change the preset tuning mode to the frequency display mode If the desired station cannot be found by the auto tuning method Pc search for the station by using the manual tuning method awa Auxe e MANUAL TUER Y le or TIN Front panel Remote control 3 Press the TUNER key front panel or the MANUAL key remote control to select the desired reception mode FM auto stereo or FM monaural n z0 Om 22 P e 9 ou Do gt Pc Auxe e MANUAL le or TIN Front panel Remote control 4 Press the lt or gt key repeatedly until the Frequency range and tuning step desired frequency is located Frequency range Tuning step gt gt U S A and Canada 87 50 107 90 MHz 0 20 a or models uf es U K and Europe 87 50 108 00 MHz 0 05 Front panel Remote control models Press the lt key to search for lower frequencies and the Australia model 87 50 108 00 MHz 0 10 D key for higher frequencies E 15 LISTENING TO AN FM BROADCAST Using the presets You can store your favorite stations in the 40 presets which are organized into five groups with eight presets in each group A stored station can be recalled simply by selecting the preset number in which it is stored Storing stat
41. the front panel or the ON OFF key on the remote control THROUGH appears on the display ER ON OFF Front panel Remote control When the sound field effect is off sound is reproduced in normal stereo First turn on the external unit to be used and then this unit 1 Select the source to be recorded by using the input selector keys ee CS po CL M AUXT FIN AUX1 or AUX2 Aue TUNER TUNER CT Front panel Remote control 2 Start recording on a recording unit an MD recorder tape deck etc 3 Start playing the input source lll Playing the recorded result via this unit Select the input signals sent from the recording unit with the input selector keys If input signals received at any digital input terminal other than the USB terminal is outputted at the digital output terminal the sampling frequency for the output signals is the same as that for input signals The sampling frequency for digital signals converted from analog signals on this unit is 44 1 kHz or 48 kHz When digital input signals are outputted at the digital output terminal track information CD text data automatic track renewal when recording is made on an MD etc is invalid if any sound field program including the graphic equalizer effect is used Both REC OUT and OPT OUT terminals on the rear of this unit output the same constituents of signals as outpu
42. those products distributed by Yamaha Corporation of America or its We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Since hearing damage from loud sounds is often undetectable until it is too late YAMAHA and the Electronic Industries Association s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels WM WantYou LISTENING For A Lifetime INTRODUCTION About this manual Features e This manual explains how to operate this unit Refer to e This unit brings high quality audio to your the separate SET UP MANUAL for how to connect this unit with other equipment and to install the Application Software etc to your computer from the supplied CD ROM e This manual mainly explains how to operate this unit using the front panel of this unit and the supplied remote control e When this unit and your computer are connected with the USB cable and the supplied Application Software is installed on the computer you can operate this unit from the computer using the Application Software Refer to the online help of the Application Software for how to use the Application Softw
43. tted from the left and right front speakers BASIC OPERATION Recording on a computer via the USB connection When recording or processing signals inputted to your computer via the USB connection the following setting is 7 Selectthe source to be recorded by using the needed on the computer input selector keys Selecting Recording Device esos e D When using Windows E wipe 1 Click the Windows Start button and select ave or ap A Settings and then Control Panel e Aue CL 2 Double click the Multimedia icon or the Sounds TUNER and Multimedia icon Tuner CL 3 Click the Audio tab and select USB Audio Device Front pare at Preferred device of Recording or Sound Recording When using a Macintosh 2 Start recording with the recording software on the Select USB Audio as the input device at Sound on computer the Control Panel 3 Start playing the input source Setting of Recording Software Select a sampling frequency from 44 1 kHz and 48 Playing the recorded result via this unit kHz Select a resolution from 16 bits and 24 bits The Press the PC input selector key repeatedly to select USB as mio sampling frequency of 44 1 kHz with the resolution of the input source and play the recorded result on the 2 16 bits produces a sound quality comparable to the computer papel compact disc CD o 2 Ifthe number of USB channels is
44. tus of the tuner In the frequency display mode Each press of E selects a higher frequency and lt A selects a lower frequency In the preset tuning mode Each press of E selects a higher preset station number and lt selects a lower preset station number E m E c 5 zi 9 77 Q E 9 wn Ro 7 CONTROLS AND THEIR FUNCTIONS About the display This section explains what the various display indicators mean q VIRTUAL S 1 VIRTUAL This indicator appears when this unit is using Virtual 3D 2 USB This indicator appears when audio signals are sent or received via the USB terminal If you use a Macintosh computer this indicator is always illuminated when this unit is connected to the computer via the USB terminals 3 dits DTS This indicator appears when an input signal is decoded with DTS 4 PCM This indicator appears when a PCM digital audio signal is selected as the input source OR This indicator appears when headphones are connected to the headphone jack of this unit 6 5 1CH This indicator appears when a 5 1 channel digital audio signal is selected as the input source 7 DSP This indicator appears when the DSP is processing the input signal Sound output indicator This indicator shows the currently used speakers A red dot shows that the corresponding speaker is currently used or the speaker is set for use in the Application
45. uces multi channel sources such as Dolby Digital and DTS providing realistic surround effects even with just two speakers CONTENTS CAUTION OUTLINE OF THIS UNIT Main features of this unit 3 Dolby Digital and DTS 4 Virlugl 3B oen 5 Digital Sound Field Processing DSP 5 CONTROLS AND THEIR FUNCTIONS Front panel amp Remote control About the display BASIC OPERATION Playing a source 9 Using sound field programs 11 Hecording 12 LISTENING TO AN FM BROADCAST Tuning into an FM station Using the presets ADVANCED OPERATION Adjusting the speaker balance 19 Setting USB channel 20 Operating this unit with the Application Software 22 APPENDIX Dd Troubleshooting DIGITAL Specifications Manufactured under license from Dolby Laboratories Dolby AC 3 Pro Logic and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved DIGITAL SURROUND Manufactured under license from Digital Theater Systems Inc US Pat No 5 451 942 and other world wide patents issued and pending DTS DTS Digital Surround are trademarks of Digital Theater Systems Inc Copyright 1996 Digital Theater Systems Inc All Rights Reserved gt c
46. us and may result in fire or other accidents YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that specified Always set the volume to minimum before starting audio playback Increase the volume gradually to an appropriate level after playback has been started Do not attempt to clean the unit with chemical solvents as this might damage the finish Use a clean dry cloth Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty When not planning to use this unit for a long period 1 vacation etc disconnect the AC power plug from the wall outlet To prevent lightning damage disconnect the AC power plug when there is an electric storm Grounding or polarization Precautions should be taken so that the grounding or polarization of appliances is not defeated For U K customers If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate 3 pin plug fitted For details refer to the instructions described below Note The plug severed from the mains lead must be destroyed as a plug with bared flexible cord is hazardous if engaged in a live socket outlet SPECIAL INSTRUCTIONS FOR U K MODEL IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE Blue NEUTRAL Brown LIVE As t
Download Pdf Manuals
Related Search