Fastora NAS-T4 Hard Drive Array
Contents
1. I Checklist v The Appliance Server x 1 v Power cord X 1 v HDD Tray x 4 v Hardware Installation Guide v Quick Installation Guide x 1 v HDD mounting screws v The utility CD x 1 v Software user Guide FASTORA Filer Make sure that all of the items listed above are present If there are damaged or missing parts contact your supplier and or dealer immediately Do not attempt to apply power to the system if there is damage to any of its components IIl Dimensions 27140 Doo ae I rl 4 l CJ Unit mm Copyright 2003 AXIOMTEK Co Ltd 1 Version A1 August 2003 Printed in Taiwan 9410000400 III Rear Panel Outlets CG J D E So eo re AAS ow 1 Chassis FAN 2 AIC Inlet of Power Supply 3 FAN of Power Supply 4 Gigabit Ethernet port LAN2 5 10 100 Ethernet port LAN1 6 COM Port 1 IV Installation Steps Step 1 Install HDD Via hot swap drive tray to the drive bay Step 2 Connect the cable of Ethernet The appliance is switched on after one or both AC power cord is connected and the switch is are on the on position Make sure the green IDE LED is continuously Step 3 The red system LED is continuously at diagnostics status about 2 seconds then the green system LED flash rapidly one flash per 0 5 second at the appliance is booting S2. system status control LED Green LED for system status 1 One flash per 0 5 second when the appliance is booting 2 One flash per 1 0 second when the appliance is being shutdown 3 One flash per 2 0 second when the appliance is being re building 4 Always on when the appliance is ready Red LED for System alert 1 When appliance is booting the red LED will turn on for 1 second while BIOS is doing POST power on self test then the LED changes to green 2 One flash per 1 0 second when one or two Fans fail Fans 1 is the CPU fan Fan 2 is the chassis fan 3 The red LED is continuously on when the appliance is identified The unique design for finding out the appliance quickly and makes it in control This can be done by FASTORA Filer Copyright 2003 AXIOMTEK Co Ltd Version A1 August 2003 Printed in Taiwan 9410000400
3. tep 4 The green LED is continuously means the appliance is ready Step 5 Starts to manage the appliance with the File Assistant Utility in the CD Step 6 Finish the setting of the appliance 2 Copyright 2003 AXIOMTEK Co Ltd Version A1 August 2003 Printed in Taiwan 9410000400 V Front Bezel Indicators Power control and reset buttons 8 Power control button 1 Be sure the A C power cable is in socket 2 When Power switch on the appliance starts to initiate 3 Press this button once to shutdown the appliance and then press once again to switch on the appliance Attention 1 When the appliance is switched on press this button continuously over 4 seconds to switch off the power This switch off activity happens only when the appliance is hung otherwise it may make the appliance non operational or damage the drives 2 It takes around 20 seconds for shutdown Indicators of Ethernet control 6 Link Active LED of LAN port 1 1 This green LED is on when Ethernet port 1 is active Copyright 2003 AXIOMTEK Co Ltd 3 Version A1 August 2003 Printed in Taiwan 9410000400 connecting 2 This LED flashes when there is transmit or receive activity to or from the appliance Link Active LED of LAN port 2 for Gigabit Lan 1 This green LED is on when Ethernet port 2 is active connecting 2 This LED flashes when there is transmit or receive activity to or from the appliance Indicators of
Download Pdf Manuals
Related Search