Home
Uniden TCX860 Cordless Expansion Handset
Contents
1. Using Your Expansion Handset Now that your new handset is registered it can perform all the same functions as the handsets originally included with your phone With your new handset you can e Transfer calls or intercom between handsets and base e Use two handsets as 2 way radios in DirectLink mode e Use two handsets as a baby room monitor e Hold up to 5 way conference calls e Access voice mail using handsets or main base See the owner s manual that came with your main base unit for complete instructions on operating your new expanded digital phone Battery Information Low battery alert When the batteries are very low and need to be charged the phone is programmed to eliminate functions in order to save power The batteries need to be charged when The empty battery icon appears Low Battery appears in the display If the phone is in standby mode none of the keys will operate If you are on a call complete your conversation as quickly as possible and return the handset to the charging cradle Cleaning the battery charging contacts To maintain a good charge it is important to clean the charging contacts on the handset once a month Using water only dampen a cloth to clean the charging contacts contacts Then make sure to go back over the charging contacts with a dry cloth before returning the handset to the charger to charge Ss Caution Do not use paint thinner benzene alcohol or other
2. chemical products Doing so may discolor the surface of the telephone and damage the finish I C Notice TERMINAL EQUIPMENT NOTICE This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications This is confirmed by the registration number The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment NOTICE The Ringer Equivalence Number REN for this terminal equipment is marked on the equipment itself The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five RADIO EQUIPMENT The term IC before the radio certification number only signifies that Industry Canada technical specifications were met Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Privacy of communications may not be ensured when using this telephone As an Energy Star Partner Un
3. Handset Follow these three easy steps to get your new handset ready to use 1 Install the battery pack 2 Connect the charger and charge your new handset for 15 20 hours 3 Register your new handset to the main base Step 1 Install the Battery Pack 1 Press down on the handset battery case cover use the finger indention for a better grip and slide the cover downward to remove 2 Plug the battery pack connector red amp black wires into the jack inside the battery compartment The connector notches fit into the grooves of the jack only one way Match the wire colors to the polarity label in the battery compartment and push the connector in until you hear a click 3 Make sure you have a good connection by slightly pulling on the battery wires If the connection is secure the battery jack will remain in place 4 Place the battery case cover back on the handset by sliding it upwards until it clicks into place 5 Place the handset in the charging cradle with the keypad facing forward e Use only the Uniden battery BT 446 supplied with your phone Replacement batteries are also available through the Uniden Parts Department See page 2 e Recharge your handset on a regular basis by returning the handset to the charger after each phone call Rechargeable Nickel Metal Hydride Batteries lt A Must Be Recycled or Disposed of Properly E amp Y 3 Step 2 Connect the Charger Connect the AC adapter to th
4. Uniden TCX 860 Accessory Handset OWNER S MANUAL Welcome Congratulations on your purchase of the Uniden TCX860 optional handset and charger This expansion handset is for use with the Two Line Digital Expandable TRU8866 series model numbers may vary Each model within this series will support up to ten handsets It functions as a 2 line telephone system if you subscribe to two phone lines You can place a fully featured cordless handset anywhere in your home as long as you have AC power is available to connect the handset charging cradle IMPORTANT The TCX860 expansion handset will not operate unless it has been registered to your main base This manual describes how to set up and connect your new handset for instructions on operating your new handset refer to the owner s manual supplied with your main base To purchase expansion handsets TCX860 visit our web site at www uniden com Checking the Package Contents Make sure you have received the following items in the package If any of these items are missing or damaged contact the Uniden Parts Department e Cordless Handset e Charging Cradle e Battery Pack BT 446 Capacity 800 mAH 3 6V e AC Adapter AD 0005 INPUT 120V AC 60Hz OUTPUT 9V DC 210 mA e Beltclip e This Owner s Manual e Other Printed Material Uniden Parts Department at 800 554 3988 Hours M F 8 00 a m to 5 00 p m CST or visit our website at www uniden com Installing Your Expansion
5. e DC IN 9V jack and to a standard 120V AC wall outlet Set the charger on a desk or tabletop and place the handset in the charger with the keypad facing forward Make sure the charge LED illuminates If the LED does not 1 2 5 To AC outlet T J ToDCINSV A G AC adapter supplied illuminate check to see that the AC adapter is plugged in and that the handset makes good contact with the charger charging contacts any other AC adapter e Use only the supplied AD 0005 AC adapter Do not use e Place the charger close to the AC outlet so that you can unplug the AC adapter easily 4 Charge the handset for 15 20 hours before using Step 3 Register the Handset YOU NEED TO REGISTER THE TCX860 TO THE MAIN BASE BEFORE USE 1 Be sure the handset battery is fully charged 2 With the main base in standby mode i e not being used place the expansion handset in the main base to begin registration While the handset is registering Handset Registering will appear in the handset LCD When Registration Complete is displayed the handset has been registered to the base If Registration Failed appears please try these steps again TCX860 K Charge the handset Handset gt for 15 20 hours Charger WS Place the TCX860 handset in the main base to register TCX860 fX Handset Handset Registration Registering i gt Complete TCX860 Handset 1 Main Base
6. iden has determined that this product or product ms models meets the Energy Star guidelines for energy efficiency Energy Star is a U S registered mark THE FCC WANTS YOU TO KNOW Changes or modifications to this product not expressly approved by Uniden or operation of this product in any way other than as detailed by the owner s manual could void your authority to operate this product This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Privacy of communications may not be ensured when using this phone To insure the safety of users the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage This product has been tested and found to comply with the FCC s exposure criteria For body worn operation the FCC RF exposure guidelines were also met when used with the RadioShack accessories supplied or designed for this product Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided Uniden works to reduce lead content in our PVC coated cords in our products and accessories Warning The cords on this product and or accessories contain lead a chemical known to the State of California to cause bir
7. ing the defect that has caused you to return it The Product should be shipped freight prepaid by traceable means to warrantor at Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd Fort Worth TX 76155 800 297 1023 8 a m to 5 p m Central Monday through Friday Uniden May be covered under one or more of the following U S patents 4 523 058 4 595 795 4 797 916 5 381 460 5 426 690 5 434 905 5 491 745 5 493 605 5 533 010 5 574 727 5 581 598 5 650 790 5 660 269 5 661 780 5 663 981 5 671 248 5 696 471 5 717 312 5 732 355 5 754 407 5 758 289 5 768 345 5 787 356 5 794 152 5 801 466 5 825 161 5 864 619 5 893 034 5 912 968 5 915 227 5 929 598 5 930 720 5 960 358 5 987 330 6 044 281 6 070 082 6 125 277 6 253 088 6 314 278 6 418 209 T REGISTER ONLINE TODAY THANK YOU FOR BUYING A UNIDEN PRODUCT A World Without Wires Uniden 2004 Uniden America Corporation Fort Worth Texas Contains additional foreign articles Custom manufactured in China UUZZ01854BZ
8. th defects or other reproductive harm Wash hands after handling One Year Limited Warranty Important Evidence of original purchase is required for warranty service WARRANTOR UNIDEN AMERICA CORPORATION Uniden ELEMENTS OF WARRANTY Uniden warrants for one year to the original retail owner this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below WARRANTY DURATION This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale The warranty is invalid if the Product is A damaged or not maintained as reasonable or necessary B modified altered or used as part of any conversion kits subassemblies or any configurations not sold by Uniden C improperly installed D serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty E used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden or F installed or programmed by anyone other than as detailed by the owner s manual for this product STATEMENT OF REMEDY In the event that the product does not conform to this warranty at any time while this warranty is in effect warrantor will either repair or replace the defective unit and return it to you without charge for parts service or any other cost except shipping and handling inc
9. urred by warrantor or its representatives in connection with the performance of this warranty Warrantor may replace the unit with a new or refurbished unit THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER WHETHER EXPRESSED IMPLIED OR ARISING BY OPERATION OF LAW INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you LEGAL REMEDIES This warranty gives you specific legal rights and you may also have other rights which vary from state to state This warranty is void outside the United States of America and Canada PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY If after following the instructions in the owner s manual you are certain that the Product is defective pack the Product carefully preferably in its original packaging Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton The Product should include all parts and accessories originally packaged with the Product Include evidence of original purchase and a note describ
Download Pdf Manuals
Related Search
Related Contents
Chief Manufacturing CM6QH SERIES User's Manual FlexScan EV2736W Manuel d`utilisation GR-TMTC-0001 Data Sheet and User`s Manual to Manual Tripp Lite 8-Port 1U Rack-Mount USB/PS2 KVM Switch with On-Screen Display Copyright © All rights reserved.
Failed to retrieve file