Home
Zanussi 728541 Refrigerator User Manual
Contents
1. eese tnt 6 NOTES ON CD R AND CD RW DISCS 6 NOTES ON DISCS sisse asenon tete ana 7 SUPPLIED ACCESSORIES tenants 8 DISC TYPES COMPATIBLE WITH THIS UNIT 9 GENERAL PROPERTIES tenentes 10 FRONT PANEL FUNCTIONS 11 FRONT PANEL DISPLAY 4 41 1 1 244 12 REAR PANEL CONNECTIONS 13 CONNECTION OF YOUR DVD PLAYER WITH 14 COMPONENT VIDEO YPBPR PROGRESSIVE SCAN amp CONNECTION 15 CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER 16 FITTING BATTERIES IN YOUR REMOTE CONTROL 18 REMOTE CONTROL FUNCTIONS 18 DVD PLAYBACK 1 tatem 20 DIRECT SELECTION OF SCENES 21 REPEAT PLAY tisaini paa nnnm a aa eiaa E EKAA aa 21 CONVENIENT FUNCTIONS eese nete tnter tete nnenes 22 VIDEO CD PLAYBACK esent tnter tnter tnn ananas 23 DIRECT SELECTION OF SCENES 24 REPEAT
2. The details differ depending on the disc concerned Also refer to the instructions accompanying the disc After steps 1 to 4 above the menus are displayed on the TV screen 5 Press the number button s to select the preferred item The player now starts to play the selected item NOTE Use 10 button to enter two digit numbers 4 6 5 buttons are not used for selecting items for video CDs What is Playback Control PBC If a video CD has playback control written on the jacket of disc it means that particular scenes or information can be selected for viewing interactively with TV screen using the menu screen NOTE Whenever you insert a disc PBC is always on After operation When the unit is not in use remove the disc and press ON STANDBY to turn the unit to standby mode NOTE disc continues to rotate while the menu is displayed even after the player has finished playing a particular item When no further selections are to be played be sure to press the STOP lt button to clear the menu display e If the disc is placed upside down and it is a single sided disc TV screen will display either NO DISC or DISC ERROR For your reference When y symbol appears while a button is pressed on up left corner of OSD On Screen Display it means that the player or the disc prohibits the corresponding operation Stopping Play To stop the play perman
3. Dolby Digital Many movie theaters are equipped with 5 1 channel surround systems This same type of technology is available to you in your home To enjoy full 5 1 channel surround your DVD player must be connected to an external Dolby Digital decoder via the digital outputs Dolby Pro Logic This is Dolby Laboratories technology to decode Dolby Surround encoded programs actively Dolby Surround programs have four channels of audio Left Center Right and Surround encoded into a standard 2 channel stereo signal The rear channel is monaural PCM PCM stands for Pulse Code Modulation and is digital audio MPEG Short for Moving Picture Experts Group This is an international standard for compression of moving images On some DVDs digital audio has been compressed and recorded in this format Divx DivX is a digital video compression technology based on 4 and developed by DivX Networks Inc NOTE This DVD player may not support some MP3 recordings due to differences in recording formats or disc type Please read the owner s manual about MP3 playback CD R CD RW discs recorded by CD DA method can be played Some CD R CD RW discs may be incompatible due to laser pick up and disc design Some VCD SVCD discs may be incompatible DVD R RW discs recorded by DVD Video method can be played Some DVD R RW discs may be incompatible due to laser pick up and disc design Some discs may be incompatible with JPEG V
4. pii REV FWD 4 TIME PLAY MODE 1 TIME button Changes the playing time display mode of the disc title track etc on the OSD and front panel display 2 OPEN CLOSE 4 button Opens or closes the disc tray 3 Number buttons Press to enter track chapter title time numbers directly 4 SEARCH MODE button Press to select the unit for search title chapter track time 5 TOP MENU button Displays the title menu on the TV screen 6 MENU button Displays the DVD root menu on screen 7 SLOW FORWARD button Use this button for forward slow playback 7 1 SLOW BACKWARD 4 button Use this button for DVD backward slow playback 8 PLAY PAUSE button Plays pauses the disc For any DVD title that has a root menu with still picture this button functions as button ENTER in the root menu Otherwise this functioning of Play Pause button on the root menu will be prohibited by the disc and will appear 9 REV FWD buttons Press to adjust the forward and reverse playback at different speeds during playback fast forward reverse 10 SKIP 9 button Press to start playback from the previous chapter or track 11 STOP button Stops playing disc 12 SETUP DISP button Displays the current playing status or set up menu on the TV screen 13 Arrow buttons Move to the items or settings 14 ENTER button Executes the items or settings 15 ON STANDBY button Turns the uni
5. Model Name SD 260ESE This model has the following features DVD CD DA CD R CD RW Playback VCD Video CD SVCD Playback MP3 Playback JPEG MPEG Playback DivX MPEG4 Playback 2 Channel analog audio output Coaxial Digital Audio output Component Video Output Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works Copyright 1992 1997 Dolby Laboratories Inc All rights reserved This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc TABLE OF CONTENTS TABLE OF CONTENTS 0 92 1 0 2 ABOUT THIS MANUAL _ 3 SAFETY INFORMATION neret tenente ntn tnnt 3 lul cH 4 SAFETY PRECAUTIONS esee netten tnter tatnen 4 SAFETY PRECAUTIONS ll
6. symbol appears on up left corner of screen f you wait for ten seconds without pressing any button for selecting scenes by title number the operation is cancelled 21 Selecting Scenes by Time You can view the DVD starting from any time point you want Press SEARCH on the remote control twice during playback The time search box is displayed on the screen You can see the total elapsed play time of the title as Enter the time using number buttons The title is played beginning from the desired time just after you enter the time if not prohibited by the DVD You can clear the fields by pressing the CLEAR button if you enter wrong numbers You can press RETURN button to cancel time search NOTE If you attempt to enter a number greater than the total time of the current title it will cancel the operation f you wait for ten seconds without pressing any button for entering time the operation is cancelled REPEAT PLAY Repeat Viewing Press PLAY MODE during playback Each time this button is pressed a different repeat box is displayed on the screen lf CHAPTER REPEAT is displayed the current chapter will be played again If TITLE REPEAT is displayed the current title will be played again If REPEAT OFF is displayed the repeat mode is disabled NOTE Repeat play may be prohibited by some DVD titles Repeating a section
7. between two specific points repeat Press RPT during playback at the point where repeat play is to commence A SET A is displayed Press A B RPT again at the point where repeat play is to be concluded B SET is displayed and the repeat play of the selection between points A and B starts if not prohibited by the DVD To return to normal play Press RPT again CANCELLED is displayed and the A B Repeat is disabled CONVENIENT FUNCTIONS Displaying the time information Press SETUP DISP during playback When SETUP DISP is pressed during playback some information is displayed on TV screen to indicate the current status of the disc In the display screen you can find the following information lines Line 1 Title amp Chapter Numbers Line 2 Audio Format Number of Output Channels amp Audio Language Line 3 Subtitle Language Number amp Subtitle Language Line 4 Time Counter Mode amp Time Counter Press SETUP DISP button again to close the information screen You can also display time information screen by pressing TIME button Time counter modes can be selected by pressing TIME button consecutively Press once TITLE ELAPSED Mode Press twice TITLE REMAIN Mode Press thrice CHAPTER ELAPSED Mode Press fourth CHAPTER REMAIN Mode If TITLE ELAPSED is displayed the elapsed time for the title is being displayed o
8. delete the incorrect entry Press OPEN CLOSE to activate parental setup setting PREFERENCES ANGLE MARK SMART NAVI and DEFAULTS items will not be available if the player is in RESUME Pre Stop mode ANGLE MARK This option allows you to turn ON OFF the angle mark on the screen which is displayed to indicate that a multi angle scene has started It also shows which angle you are currently watching STANDBY TIME Standby activation time can be adjusted or standby can be disabled when using this option Standby can only be activated when one of the time option is selected and no button is pressed during the selected time duration in stop mode SMART NAVI This option allows you to enable or disable the SMART NAVI which is used for playing MPEG MPEG4 DivX or JPEG CDs TRANSPARENCY Using this option to select one of the transparency levels for on screen display DEFAULTS If you choose DEFAULTS press ENTER button The factory presets are loaded Parental level and parental password do not change DivX REGISTRATION There is a registration code in this page This code is utilized to register this player with the DivX Video On Demand service This will allow you to rent and purchase video using the DivX Video On Demand format DivX VOD User Steps 1 The user will open the DivX Registration page by entering the SETUP menu of the Player 2 You will get the DivX VOD registration code f
9. once during playback The chapter title search box is displayed on the screen You can see the total number of chapters as xx Enter the chapter number using number buttons The selected chapter is played just after you enter the chapter number digits You can clear the field by pressing the CLEAR button if you enter two digits number wrong You can press RETURN button to cancel chapter search NOTE you attempt to enter a number greater than the total number of chapters on the current title the search box disappears and symbol appears on up left corner of screen If you wait for ten seconds without pressing any button for selecting scenes by chapter number the operation is cancelled Selecting Scenes by Title Number Press SEARCH on the remote control once during playback The chapter title search box is displayed on the screen Press button on the remote control to select the title field in the search box to change the title You can see the currently playing title and total number of titles as xx Enter the number of the title using number buttons The selected title is played just after you enter all the title number digits You can clear the field by pressing the CLEAR button if you enter wrong number You can press RETURN button to cancel title search NOTE f you attempt to enter a number greater than the total number of titles the search box disappears and y
10. the remote control during playback The time search box is displayed on the screen as GO TO xx xx Enter the time using number buttons Press RETURN to cancel time search If you attempt to enter a number greater than the total time of the disc or current title it will cancel the operation If you wait for ten seconds without pressing any key for selecting scenes the operation is cancelled REPEAT PLAY Only for version 1 1 VCD s Press STOP button once PRESS PLAY TO CONTINUE message appears on the screen Press PLAY MODE Each time this button is pressed a different repeat box is displayed on the screen If REP ONE is displayed the current track will be played again If REP ALL is displayed all tracks on the disc be played again If REPEAT OFF is displayed the repeat mode is disabled Repeating a section between two specific points repeat Press RPT during playback at the point where repeat play is to commence A B SET is displayed on screen Press A B RPT again at the point where repeat play is to be concluded B A TO B SET is displayed and the repeat play of the selection between points A and B starts To return to normal play Press A B RPT again ATO B CANCELLED is displayed and the A B Repeat is disabled NOTE If you give up entering the point B after entering point A simply press RETURN
11. to the next chapter track 7 ON STANDBY INDICATOR 8 ON STANDBY button Turns the unit on or switches the unit to standby mode atiy ENG gt lt o lt LE Z oc 00000 00 o000 0 0p Ug D 00000 0o 00000 0g Oo oO 00000 0p o00000 9 n O0 0 0 00000 0o o00000 goa Ug 0 Soo gt 20000 00 ng 7579095 O99 909 n 90052665 58 p E Bg anno anas nu8 ong ug B muB ug ag Doon aooo 595 ong 1 Play Pause 2 Current Disc 3 Time or Title Chapter Track Number 4 Dolby Digital DTS 5 Zoom 6 Title Number 7 Angle 8 Chapter Track Number 9 Repeat ENG 12 REAR PANEL CONNECTIONS rO 5 m E i COMPONENT 1 DIGITAL OUT COAXIAL connector Connects to an audio component using the coaxial digital connection cord 2 VIDEO OUT connector Connects to the video input connector on the TV 3 AUDIO connectors Connects to the AV amplifier or audio input connector on the TV by using 2 cords Left Right 4 SCART OUTPUT connector Connects to the scart input connector on the TV 5 COMPONEN
12. 0 loaded RGB CVBS Through Full Euroscart Output Pin 8 Control Analog Component Video Y output 1Vpp 75 ohm loaded Interlaced Progressive output 700 Vpp 75 ohm loaded Pr output 700 Vpp 75 ohm loaded Audio Type Dolby Digital Decoding DTS Digital Output MPEG Multichannel Decoding LPCM Audio Output Digital Audio Output Coaxial Output Analog Outputs 24 Bit 96 kHz down sampling DAC 2 RCA jack outputs Left Right Left Right audio outputs of Full Euroscart Output Channel 2 Vrms 0 dB fs 1 Dimension 421 mm W x 43 8 mm H x 260 mm D Design and specifications are subject to change without notice 38 ENG DEFINITION OF TERMS Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number different angles the same scene is shot from the front from the left side from the right side etc With such discs the ANGLE button can be used to view the scene from different angles Chapter Number These numbers are recorded on DVD discs A title is subdivided into many sections each of which are numbered and specific parts of video presentations can be searched quickly using these numbers DVD This refers to a high density optical disc on which high quality pictures and sound have been recorded by means of digital signals Incorporating a video compression technology MPEG 11 and high density recording technology DVD enables esthetically pleasi
13. 5 min Video GERNE Various screen and audio functions can be VIDE o 8 cm E easily selected through the on screen De menu sided 160 min VIDEO CD 12 cm 74 min Audio COMPACT video with CD sound VHS quality amp 0 S t via MPEG 1 compression technology Ideo ismar vigo 8cm 20 min AUDIO CD AnLP is recorded as an analog signal with more distortion CD is recorded as a Digital Signal with better audio quality COMPACT Audio less distortion and less deterioration of GG audio quality over time 8 cm 20 min 12 cm 74 min DIGITAL AUDIO MP3 CD 12 cm It depends MP3 is recorded as a Digital Signal with better audio quality less distortion and Audio On MES VIPS 3 quality overtime READABLE 8 cm PICTURE CD Vi teem It depends LPEG tpt eres aes es still picture quality READAB 8cm SVCD 12 35 stands for Super Video CD Audio SVCD is very similiar VCD It is en 5 VC D coded by MPEG 2 and it has higher video Video quality than VCD 8 10 DivX 12 cm Audio It depends Video amp Audio with MPEG 4 Compression on D ivX technology Dorv video Busty 8 cm GENERAL PROPERTIES 1 DVD VCD SVCD CD DA CD R CD RW MP3 JPEG MPEG4 DivX playback 2 NTSC PAL playback 3 User friendly multi language OSD menu control 4 Vacuum Fluorescent Display VF
14. D 5 Dolby Digital DTS MPEG Multi channel LPCM audio via coaxial digital audio output 6 Multiple Aspect Ratio support 16 9 Widescreen 4 3 Letterbox 4 3 Pan amp Scan 7 Multi Audio up to 8 support According to disc content 8 Multi Subtitle up to 32 support According to disc content 9 Multi Angle up to 9 support According to disc content 10 8 parental levels control According to disc content 11 Fast forward and rewind at different speeds 12 Playback at 2x speed without any malfunction of the display 13 Slow motion playback at different speeds 14 Frame by frame forward playback 15 Time Search 16 Repeat 17 A B repeat 18 Zoom 19 Program function for Audio CD MP3 and JPEG 20 Scart Socket 21 Coaxial Digital Output 22 Component Video Output FRONT PANEL FUNCTIONS 1 Disc Tray Place a disc on the tray 2 Front Panel Display VFD Indicates the playing time title chapter track etc 3 OPEN CLOSE 4 button Opens or closes the disc tray 4 STOP button Stops playing disc 5 PLAY PAUSE button Plays pauses the disc For any DVD title that has a root menu with still picture this button functions as button select selects highlighted item in the root menu Otherwise this functioning of PLAY PAUSE button on the root menu will be prohibited by the disc and will appear 6 SKIP buttons Press to go back to the preceding chapter track or go
15. O SETUP and PARENTAL SETUP pages in RESUME mode USING SUB MENUS Use 3 4 arrow buttons to switch between left and right menus Once you enter any submenu Use 6 5 arrow buttons to move the highlighted position up and down Press ENTER to choose the highlighted option on the right menu To close the setup menu press SETUP DISP MENU ITEMS VIDEO SETUP VIDEO SETUP page will not be available if the player is in RESUME Pre Stop mode TV DISPLAY The aspect ratio of the picture provided by the DVD player can be varied in line with the features available on the TV in use The options available are NORMAL PS 4 3 Pan amp Scan Allows you to see the movie fill the entire screen of your TV but not the right and left edges This type of picture can only be viewed if it is contained on the disc NORMAL LB 4 3 Letterbox Allows you to see movies in their original aspect ratio You will see the entire frame of the movie but it will occupy a smaller portion of the screen WIDE Wide screen 16 9 Choose this setting if your DVD player is connected to a wide screen TV 29 NOTE Depending on the format of the DVD disc eg 2 35 1 the picture may still have black lines above and below this picture TYPE The video standard of the DVD player output can be selected from MULTI SYSTEM NTSC or PAL If MULTI SYSTEM is selected the output
16. PLAY 24 CONVENIENT FUNCTIONS 25 AUDIO CD PLAYBACK 25 DIRECT SELECTION OF TRACKS 226 REPEAT PLAY 226 CONVENIENT FUNCTIONS 26 SMART 27 USING SETUP MENU 228 MENUITEMS 29 TROUBLESHOOTING 31 SPECIFICATIONS 32 DEFINITION OF TERMS etn 33 ABOUT THIS MANUAL Instructions in this manual describe the controls on the player You can also use the controls on the remote if they have the same function as those on the DVD player Dear Customers We would like to thank you for purchasing this DVD player We strongly recommend you to study the operating instructions carefully before attempting to operate the unit and note the listed safety precautions SAFETY INFORMATION CAUTION LASER CLASS 1 Wave length 650nm 15nm for DVD CLASS 1 790nm 15nm for CD LASER PRODUCT Maximum output of accessible laser radiation lt 0 39 mW continuous wave Classified according to IEC 60825 1 1993 A1 1997 DVD Player is a class 1 laser product However this product uses a visible laser beam which could cause hazardous radiation exposure Be sure to operate the player correctly as instructed While this player is plugged to the wall outlet do not place your eyes close to the opening of the disc tray or any other openings in the case of the product For your own safety do not attempt to look i
17. T VIDEO OUT YPsPr connectors Connects to TV with YPsPn inputs a ENG CONNECTION OF YOUR DVD PLAYER WITH TV Be sure to turn off the power of each component before making the connections Scart socket RGB signal via scart cable gives you the best picture performance If your DVD player will not be connected to a hi fi set or A V amplifier to hear better sound scart is enough for both audio amp video connections huma Scart Cable commercially available Video amp Audio Output RCA Sockets Video yellow amp audio Red right White left output sockets can be used to connect the DVD player to your TV set via cables To make this connection your TV set must have Video amp audio input connectors This type of connection is alternative to scart connection Picture quality is not as good as Scart connection but audio performance is the same p 9 Lid ALDIC Left Right Output Audio Video Cable commercially available 14 ENG COMPONENT VIDEO YPBPR PROGRESSIVE SCAN amp CONNECTION Component Video output jacks can be used to have the best picture quality Your TV set must have component video input connectors for this type of connection These jacks are used for only video connection For audio red amp white output jacks must be used If you have a high definition or digital ready TV you may ta
18. Vid Files with NI logo are subtitles files Subtitle files with sub txt srt smi psb and ass extensions are supported by this device You can enable display of subtitles by pressing ENTER key when you are on the subtitle file The synchronization of the subtitle with the audio and video depends on the subtitle file content Please be sure that the correct subtitle file is recorded on the disc and selected Files with logo DivX MPEG4 or X Vid files Use arrow keys to navigate between the files and press ENTER key when you are on the film If you select a subtitle file prior to the playback of the film subtitle will be displayed during playback When subtitles are displayed you can adjust the position where subtitle is displayed by 6 5 keys JPEG File Select a file on JPEG CD Slide Show starts automatically Pause Press PLAY PAUSE button during playback The play freezes PAUSE appears on screen To return to normal play Press PLAY PAUSE again Stopping Play Press STOP lt The play is stopped STOP appears on screen Fast Forward Reverse For MP3 MPEG MPEG4 DivX R Press FWD 8 or REV 7 during playback to increase decrease play speed NOTE No sound will be heard during fast forward or reverse Skip Forward Backward Press SKIP STEP or SKIP 9 during playback Next or previous file in the current directory will be pla
19. and the operation is cancelled CONVENIENT FUNCTIONS Displaying the time information Press TIME during playback Each time this button is pressed a different time information box is displayed on the screen If SINGLE ELAPSED is displayed the VFD display on the unit shows the elapsed time for the track which is being played If SINGLE REMAIN is displayed the VFD display on the unit shows the remaining time for the track which is being played Displaying a scene with a larger and closer view ZOOM function enables you to take a closer look at the Scene you are viewing This is especially useful when you are watching a science fiction or an adventure film Press ZOOM during playback You can change the zooming ratio by pressing ZOOM button several times NOTE You can move to any area of the enlarged screen by using the 3 4 6 5 arrow buttons To return to normal play Press ZOOM several times until ZOOM OFF is displayed on the screen 25 AUDIO CD PLAYBACK Preparations Turn on your audio system if the player is connected to an audio system Basic Play 1 Press ON STANDBY button 2 Press OPEN CLOSE to open the disc tray 3 Place a disc onto the tray 4 Press OPEN CLOSE Play is commenced After operation When the unit is not in use remove the disc and press ON STANDBY to turn the unit to standby mode NOTE If the disc is place
20. ayed The rest of the subtitles recorded will be displayed in sequence for every press of the SUBTITLE button To turn off the subtitle press SUBTITLE several times until appears on the screen NOTE When the preferred language is not selected even after pressing the button several times it means that the language is not available on the disc When the player is restarted or the disc is changed the subtitle selection is automatically changed back to the initial settings Changing Audio Soundtrack Language It is possible to change the audio language from the one selected at the initial settings to a different language if available This operation works only with discs on which multiple audio soundtrack languages are recorded if not prohibited by the DVD Press AUDIO during playback Press AUDIO a number of times until the preferred language is selected NOTE When the preferred language is not selected even after pressing the button several times it means that the language is not available on the disc When the player is in standby mode or the disc is removed the language heard is the one selected at the initial settings If this language is not recorded on the disc only the available language on the disc will be heard Viewing From Another Angle Some DVD discs may contain scenes which have been shot simultaneously from a number of different angles For these discs the same scene
21. cancel the operation If you wait for ten seconds without pressing any button for selecting tracks the operation is cancelled Accessing tracks using number buttons You can play any track you want just by pressing the corresponding number button For the track numbers which are greater than 9 use 10 button Press this button once and then enter the two digit track number If you attempt to enter a number greater than the total number of tracks on disc W symbol is displayed on Screen REPEAT PLAY Press PLAY MODE during playback Each time this button is pressed a different repeat box is displayed on the screen If REP ONE is displayed the current track will be played again If REP ALL is displayed all tracks on disc will be played again If REPEAT OFF is displayed the repeat mode is disabled 26 Repeating a section between two specific points repeat Press RPT during playback at the point where repeat play is to commence A SETA is displayed Press A B RPT again at the point where repeat play is to be concluded B SET is displayed and the repeat play of the selection between points A and B starts To return to normal play Press A B RPT again ATO B CANCELLED is displayed and the A B Repeat is disabled NOTE If you give up entering the point B after entering point A simply press RETURN and
22. d upside down and it is a single sided disc TV screen will display either NO DISC or DISC ERROR For your reference When appears while a button is being pressed it means that the corresponding operation is prohibited by the player Stopping Play To stop the play permanently press STOP lt twice When the STOP lt button is pressed once a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play To stop the play press the STOP button again or you can press PLAY PAUSE to continue playback Fast Forward Reverse Press FWD 8 REV 7 during playback The speed of advance or reverse changes for every press of the FWD or REV button Normal play is resumed when PLAY PAUSE button is pressed NOTE No sound will be heard during rapid advance or rapid reverse Skip Forward Backward Press SKIP STEP or SKIP 9 during playback A track is skipped forward or backward each time the button is pressed Pause Press PLAY PAUSE during playback The play freezes To return to normal play Press PLAY PAUSE again DIRECT SELECTION OF TRACKS Selecting by Time You can play the audio CD starting from any time point you want Press SEARCH on the remote control during playback The time search box is displayed on the screen as GO TO Xx Enter the time using number buttons NOTE Press RETURN to
23. e language if supported by that DVD disc DISC MENU You can select the DVD s disc menu language among these languages Disc menu appears in the selected language if supported by that DVD disc PARENTAL SETUP PARENTAL SETUP page will not be available if the player is in RESUME Pre Stop mode Playing some DVDs can be limited depending on the age of users The Parental Control function allows playback limitation level to be set by the parents 30 PARENTAL SETUP Parental Level Parental Level can be adjusted to one of the eight levels or NO PARENTAL NO PARENTAL or level 8 ADULT adjustments let you watch all of the DVD titles ignoring the DVD disc s parental level You can watch the DVD discs which have the same or lower parental level than the player s selected level only PASSWORD Password to change the parental level can be set by using this option Factory preset of the password is 0000 You have to set 4 digit password when you select a parental level for the first time You have to enter your password every time you want to change the parental level If you forget your password please contact technical service Change Password Using this item you can change the current password To change the password you will be prompted to enter your old password After you have entered your old password you can now enter the new 4 digit password You can use CLEAR key to
24. e mains plug extension leads and inter connections between the pieces of equipment are properly made and in accordance with the manufacturer s instructions Switch off and withdraw the mains plug before making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DON T remove any fixed cover as this may expose dangerous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers tablecloths curtains etc Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or nightlights on or close to equipment High temperatures can melt plastic and lead to fires DON T use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety It is illegal to watch television whilst driving DON T listen to headphones at high volume as such use can permanently damage your hearing DON T leave equipment s
25. edge Do not touch the surface Do not stick paper or tape on the disc If the disc is contaminated with any substance like glue remove before using it Do not expose the disc to direct sunlight or heat sources such as hot air ducts or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc After playing store the disc in its case On cleaning Before playing clean the disc with a cleaning cloth Wipe the disc from the centre out E x Do not use solvents such as benzene thinners commercially available cleaners or anti static spray intended for vinyl LPs RECORD INNERSIN BENZENE Discs that should not be used Only the discs including the marks shown on page 9 can be played Note that the discs with special shapes heart shaped discs hexagonal discs etc cannot be played Do not attempt to play such discs as they may damage the player O SUPPLIED ACCESSORIES In the packaging material you will find the following a Remote control b Two R03 AAA batteries for remote control c Owner s Manual 8 ENG DISC TYPES COMPATIBLE WITH THIS UNIT This player can play the following discs Disc Types Recording Disc Size Characteristics Logos Types Playing Time Single DVD 12 sided 240 contains excellent sound and video parte cm due to Dolby Digital and MPEG 2 System si
26. ent directory Alternatively you can use 5 6 keys and then press ENTER to add selected file into the program list PROGRAM Message appears with the current file index and the total files in the list Press STOP to finish program PROGRAM Message appears at the bottom of SMART NAVI Press PLAY PAUSE to start program PLAY Message appears Files in the program list are played sequentially NOTE You can use trick mode keys skip prev next files and so on You can remove the last track of the playlist by pressing the CLEAR button The program remains even after the Program Play ends If you want to quit program mode Press STOP key if a track is being played Press PROGRAM key twice The program is cancelled when The disk tray is opened or closed The player is turned off In each directory change USING SETUP MENU Press SETUP DISP button on the remote control when the player is not in playback mode The setup menu main page appears This is the menu where can change the device s settings USING MAIN PAGE Select items using 6 5 buttons The item will be highlighted when selected Press ENTER to choose the highlighted item The submenu for the selected item appears on the screen SETUP menu will only be available when the player is not in playback mode In RESUME Pre Stop mode some pages and some items cannot be accessed On the MAIN page you cannot access VIDE
27. ently press STOP lt twice When the STOP lt button is pressed once a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play To stop the play press the STOP button again or you can press PLAY PAUSE to continue playback Fast Forward Reverse Press FWD 8 or REV 7 during playback Normal play is resumed when the PLAY PAUSE button is pressed The speed of advance or reverse changes for every press of the FWD or REV button Skip Forward Backward Press SKIP STEP or SKIP 9 during playback A track is skipped forward or backward each time the button is pressed Pause Press PLAY PAUSE during playback The screen freezes To return to normal play Press PLAY PAUSE again Step Forward Press PLAY PAUSE during playback The screen freezes Press SKIP STEP The next frame of the movie is displayed 24 9 NOTE Reverse stepping is not available Slow Motion Play Forward Press SLOW p during playback The slow motion starts Press SLOW p to increase the speed The speed of slow motion play is displayed on the screen each time you change it To return normal play Press PLAY PAUSE again NOTE Reverse slow motion play is not available DIRECT SELECTION OF SCENES Selecting Scenes by Time only for version 2 0 VCDs You can view the video CD starting from any time point you want Press SEARCH on
28. er your life Please contact local service agent for help and advice Repairs should be carried out by a qualified technician only Power Cord Do not place the unit a piece of furniture or any object on the power cord mains lead Do not cut or pinch the power cord Handle the power cord by the plug Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock Never make a knot in the cord or tie it with other cords The power cords should be routed in such a way that they are not likely to be stepped on A damaged power cord can cause fire or give you an electrical shock Check the power cord once in a while If damaged ask the closest service agent for help When the AC power cord needs to be changed it should be done at a qualified service shop only SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured So please read the points below for your own safety They are of a general nature intended to help you with all your electronic consumer products and some points may not apply to the goods you have just purchased DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including th
29. hen The disc tray is opened or closed The power is turned off SMART NAVI To see the directory structure menu of JPEG MP3 MPEG MPEG4 DivX CDs you should set SMART NAVI option to WITH MENU in setup page If SMART NAVI option is set to NO MENU the content is automatically played without displaying menu Basic Play 1 Press STANDBY to turn on the power 2 Press OPEN CLOSE to open the disc tray 3 Place a disc onto the tray Hold the disc without touching either of its surfaces position it with the printed title side facing up align it with the guides and place it in its proper position 4 Press OPEN CLOSE to close the disc tray DISC LOADING message appears on screen Please wait for moment SMART NAVI appears Directories are on the left part and files in the selected directory are on the right part 5 Press 6 5 to select file to be played In the stop mode you can navigate in all directories If an MP3 track is playing only the current directory can be used for navigation 6 Press ENTER to play a file If a file is focused on the left part the preview of the item is displayed If a folder is focused on the left part the total number of files in that directory is displayed MP3 MPEG MPEGA DivX File Select a file on MP3 MPEG MPEGA DivX CDs to start play Elapsed or Remaining Time is displayed according to Time Mode 97 Subtitle Selection for MPEG4 DivX R X
30. iewer function due to different recording format or condition of the discs e ENGI
31. isc incorrectly loaded Ensure that the DVD disc is in the correct guide on the disc tray with the label facing up Wrong type of disc The player cannot play CD ROMS etc Use disc with supported formats The region code of the DVD must match the one on the rear panel of the player Wrong OSD language e Select the language in the set up menu The language for the sound or subtitles on a DVD cannot be changed e Multilingual sound and or subtitles not recorded on the DVD e Try to change the sound or subtitles using DVD s title menu Some DVD s do not allow the user to change these settings without using the disc s menu Some functions Angle Zoom etc do not work e These functions are not available on the DVD Angle can only be changed when the angle symbol is displayed No picture Check that the player is connected to TV properly and all connections between the DVD player and other attached equipments are secured Have you pressed the correct buttons on the remote control Try once more Make sure the TV TYPE and VIDEO OUTPUT are set correctly in VIDEO SETUP menu No sound Check whether the volume is set to an audible level Check whether the audio output connection is connected properly see pages 14 to 17 Distorted sound e Check that the appropriate listening mode setting is correct No response from remote control e Make s
32. ke advantage of the DVD Player s progressive scan output for the highest video resolution possible Select the Progressive Scan mode by choosing PROGRESSIVE on the VIDEO OUTPUT menu see page 29 If your TV does not accept the Progressive Scan format the picture will appear scrambled when you try Progressive Scan on the DVD Player 1 Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding IN jacks on the TV using the cable 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio Left and Right IN jacks on the TV using the audio cables mum Audio Left Right Cable commercially available Component Video Cable commercially available COMPONENT VIDEO INPUT NOTE When using the component video cables do not connect the Scart socket 15 CONNECTION OF YOUR DVD PLAYER WITH AV AMPLIFIER Be sure to turn off the power of each component before making the connections Analog Audio Output Sockets To get better sound quality the unit can be connected to an amplifier via analog audio left right outputs gt lt es Video Output Left Right Output Audio Video Cable commercially available Video Cable commercially available 16 ENG Digital Audio Output Socket For the best sound the unit can be connected from the coaxial digital audio ou
33. n the VFD display If TITLE REMAIN is displayed the remaining time for the title is being displayed on the VFD display If CHAPTER ELAPSED is displayed the elapsed time for the chapter is being displayed on the VFD display If CHAPTER REMAIN is displayed the remaining time for the chapter is being displayed on the VFD display Displaying a scene with a larger and closer view ZOOM function enables you to take a closer look at the Scene you are viewing This is especially useful when you are watching a science fiction or an adventure film NOTE Press ZOOM button consecutively will change the zoom ratios You can move to any area of the enlarged screen by using the 3 4 6 5 buttons To return to normal play Press ZOOM several times until ZOOM OFF is displayed on the screen and the picture is now in its normal size 22 Displaying Changing Subtitle Language It is possible to change the subtitle language from the one selected at the initial settings to a different language if available This operation works only with discs on which multiple subtitle languages are recorded if not prohibited by the disc Press SUBTITLE during playback When no subtitles are recorded will be displayed instead of the selected language Press SUBTITLE several times until the preferred language is selected When this button is pressed once the first subtitle recorded on the disc will be displ
34. ng full motion video to be recorded over long periods of time for instance a whole movie can be recorded DVD has a structure consisting of two 0 6 mm thin discs which are adhered to each other Since the thinner the disc the higher the density at which the information can be recorded a DVD disc has a greater capacity than a single 1 2 mm thick disc Playback Control This is recorded on a Video CD Version 2 0 The scenes or information to be viewed or listened to can be selected interactively with the TV monitor by looking at the menu shown on the TV monitor Subtitles These are printed lines appearing at the bottom of the screen which translate or transcribe the dialogue They are recorded on the DVD discs Time Number This indicates the playtime which has elapsed from the start of a disc or a title It can be used to find a specific scene quickly Not all discs permit the time search feature to be used Availability is determined by the disc s manufacturer Title Number These numbers are recorded on DVD discs When a disc contains two or more movies these movies are numbered as title 1 title 2 etc Track Number These numbers are assigned to the tracks which are recorded on Audio CDs They enable specific tracks to be located quickly Video CD This contains recordings of pictures and sound whose quality is on a par with that of video tape This player also supports Video CDs with playback control Version 2 0
35. nside this product Use of controls for adjustments and performance of procedures other than those specified may result in hazardous radiation exposure Do not open covers and do not attempt to repair any damaged parts Refer product to a service technician or qualified professional for any necessary repair The mains plug or the appliance coupler is used as the disconnect device the disconnect device shall remain readily operable CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type To reduce the risk of fire or electric shock do not expose this equipment to rain or moisture To reduce the risk of fire or electric shock and any interference use the recommended accessories only RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance SAFETY PRECAUTIONS Power Source The unit should be operated only from a 220 240V 50 Hz outlet Please do not open the cover by yourself There is high voltage in the set which will endang
36. of DivX media files DivX DivX Certified and associated logos are trademarks of DivX Inc and are used under license Following information is only for EU member states The use of the symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product ees NOTES ON CD R AND CD RW DISCS CD R Recordable and CD RW Rewritable discs recorded by the users may only be used after finalization process CD R and CD RW discs may not be usable depending on the disc features recording conditions and damage or dirt on disc The disc configuration and features are determined by the tool and device used for recording Therefore users may face with the following undesired consequences Some discs may not be read at all Some discs may cause system crash after playing for a while Some parts of the disc may be skipped or worked abnormally When compare with the original discs a CD R or CD RW disc may take longer time to playback NOTES ON DISCS On handling discs To keep the disc clean handle the disc by its
37. playback The DVD menu available on the disc is now displayed NOTE If you press MENU the root menu of DVD is displayed If you press TOP MENU the menu of the current title is displayed Press 4 6 5 to select the preferred item Press ENTER The selected item is now executed You can play any chapter you want just by pressing the corresponding number button For the chapter numbers which are greater than 9 use 10 button Press this button once and then enter the two digit chapter number If you attempt to enter a number greater than the total number of tracks on disc symbol is displayed on Screen NOTE Some DVDs may not contain root and or title menus 93 VIDEO CD PLAYBACK Preparations Turn on your audio system if the player is connected to an audio system Basic Play 1 Press ON STANDBY button 2 Press OPEN CLOSE to open the disc tray 3 Place a disc onto the tray Hold the disc without touching either of its surfaces position it with the printed title side facing up align it with the guides and place it in its proper position 4 Press OPEN CLOSE a The disc tray is closed For Video CDs without playback control Play commences immediately For Video CDs provided with playback control If disc contains a menu it will appear on the screen after a few moments Menu Play This function works only with video CDs with Playback Control version 2 0
38. rohibited by the player Stopping Play To stop the play permanently press STOP twice When the STOP button is pressed once a message PRESS PLAY TO CONTINUE will appear on the screen to remind you if you want to continue the play To stop the play press the STOP button again or you can press PLAY PAUSE to continue playback Fast Forward Reverse Press FWD8 or REV 7 onthe remote control during playback The speed of forward or reverse changes for every press of the FWD 8 or REV 7 button Normal play is resumed when the PLAY PAUSE or ENTER buttons are pressed Skip Forward Backward Press SKIP STEP orSKIP9 A chapter is skipped forward or backward each time the button is pressed Pause Press PLAY PAUSE during playback The picture will go to pause mode To return to normal play Press PLAY PAUSE again Step Forward Backward Press PLAY PAUSE during playback Press SKIP STEP orSKIP9 The next frame of the movie is displayed Slow motion Play Forward Backward Press SLOW Slow Backward 4 or Slow Forward during playback The slow motion starts Press Slow Forward p to increase and Slow Backward q to decrease the speed The speed of slow motion play is displayed on the screen each time you change it To return to normal play Press PLAY PAUSE DIRECT SELECTION OF SCENES Selecting Scenes by Chapter Number Press SEARCH on the remote control
39. rom the player The address for the DivX VOD website is www divx com vod 3 After entering the address above on the Internet go to the section where registration is to be made for DivX VOD membership 4 Use the DivX VOD Registration Activation code that you received from the player to register and set a username and a password for yourself 5 Once the registration process is over you have to download the DivX VOD activation file from the Internet and write it onto a disc 6 After inserting this disc into the player and playing the activation file you will have a new player DivX VOD Registration code activated for the player DivX VOD 7 When you want to download and watch movies enter the address www divx com vod and you will be able to download movies with your pre designated username and password by paying a certain charge Upon writing this film on the disc and inserting it into the player you can watch these the number of times that you are entitled to watch 31 TROUBLESHOOTING The picture quality is poor DVD Make sure the DVD disc surface is not damaged Scratch fingerprint etc e Clean the DVD disc and try again Ensure that the DVD disc is on the drawer with the label facing up A damp DVD disc or condensation may effect the equipment Wait for 1 to 2 hours in Stand by to dry the equipment Disc does not play No disc in the player Place a disc onto the tray e D
40. s can be viewed from each of these different angles using the ANGLE button The number of recorded angles differs depending on the disc used 1 x is displayed on the screen during playback This indicates that the multi angle scene has just started Also on unit s display VFD ANGLE message appears You will see in the upper right corner of the screen the number of the angle selection you have choosen In SETUP menu an ANGLE MARK option exists which if enabled will display a continuous angle mark on the Screen as long as multi angle scene is available Press ANGLE during playback The current angle is changed Press ANGLE several times until the preferred viewing angle is selected NOTE This function will only work on discs where different angles have been recorded The viewing angles are shown on the screen You can select one of them for viewing If you press ANGLE outside of a multi angle scene on a multi angle title is displayed It means that only one angle is currently available Using a DVD Menu Some DVD discs have unique menu structures called DVD menus For example DVDs programmed with complex content provide guide menus and those recorded with various languages provide menus for audio and subtitle language Although the DVD menus content and operation differ from disc to disc the following explains basic operation when this feature is used Press TOP MENU or MENU during
41. ss ENTER 4 If you cannot see the picture correctly select CANCEL and press ENTER NOTE If your TV set does not have a progressive scan feature nothing will be displayed on screen when PROGRESSIVE is selected If you do not see anything on the screen or if you do not select OK within ten seconds video output setting will be returned to previous setting automatically If PROGRESSIVE is selected in the VIDEO OUTPUT menu and the unit is connected to a standard analog TV no video output will be seen on the screen To cancel the PROGRESSIVE mode Press OPEN CLOSE button and then TIME button After that enter the 3 digit number 784 using number buttons The video output will be restored to the standard setting anda picture will once again be visible on a conventional analog TV AUDIO SETUP It is impossible to connect speakers directly to this DVD player unless an AV amplifier is used COMPRESSION Boosts frequency response This item can be selected between OFF to MAX LPCM OUTPUT This item can be selected as LPCM 48K or LPCM 96K LANGUAGE SETUP Audio disc menu and subtitle items will not be available if the player is in RESUME Pre Stop mode OSD LANGUAGE You can select the default OSD language of the player menus AUDIO You can select the default audio language if supported by that DVD disc SUBTITLE You can select the default subtitl
42. standard will be either NTSC or PAL depending on the DVD being played If NTSC is selected the video output will be converted to NTSC standard irrespective of disc standard If PAL is selected the video output will be converted to PAL standard irrespective of disc standard VIDEO OUTPUT The Video output of the DVD player can be selected as CVBS RGB or PROGRESSIVE Select CVBS if you connect the DVD player to the TV via RCA output Select Y Pg Pn if you connect the DVD player corresponding to your TV which has Component Video inputs that supports the interlaced mode See page 15 for Component Video connection Select RGB if you connect the DVD player to the TV via scart socket Scart output will be CVBS RGB This is the factory setting of the DVD player Select PROGRESSIVE if you connect the DVD Player corresponding to your TV which has Component Video inputs that supports the progressive scan mode See page 15 for Component Video connection WARNING To be able to see the progressive video correctly you should have a progressive scan TV and should make the video connections correctly 1 Highlight PROGRESSIVE in the VIDEO OUTPUT menu and press ENTER 2 The VIDEO SETTING IS CHANGED KEEP THIS SETTING message will be displayed on screen 3 If you see the picture correctly select OK and pre
43. t on or switches the unit to standby mode 16 AUDIO button Changes the language of the sound while playing a DVD VCD 19 17 SUBTITLE button Changes the language of the subtitle while playing a DVD 18 ANGLE button Changes the angle when playing a DVD disc recorded with multiple angles 19 A B RPT button Repeat playback between point A and point B 20 10 button For the track chapter numbers which are greater than 9 use 10 button Press this button once and then enter the two digit track chapter number 21 PLAY MODE button Press to execute disc title chapter repeat 22 RETURN button Returns to the preceding selection screen 23 PROGRAM button It is used to switch the Program Mode in stop mode of Audio and JPEG CD s 24 ZOOM button Zooms the picture 25 SKIP STEP button Press to go to the next chapter or track during playback and next frame during pause 26 CLEAR button Using this button you can delete the mistyped entries or cancel some functions DVD PLAYBACK Preparations Turn on your audio system if the player is connected to an audio system Basic Play 1 Press the ON STANDBY button 2 Press OPEN CLOSE 4 to open the disc tray 3 Place a disc onto the tray Hold the disc without touching either of its surfaces position it with the printed title side facing up align it with the guides and place it in its proper position 4 Press OPEN CLOSE 4 The disc
44. t put the set into closed areas and do not cover it Please avoid the contact of the set with water or humidity Do not put it into operation near bath swimming pools Make sure enough air circulation is provided around the product Place the player in a location with adequate ventilation to prevent heat build up in the player Should any solid object or liquid fall into the cabinet unplug the player and have it checked by qualified personnel before operating it any further SAFETY PRECAUTIONS II Notes on copyrights It is forbidden by law to copy broadcast show broadcast via cable play in public or rent copyright material without permission This product is equipped with copy protection measures developed by Macrovision Copy protection signals are recorded on some discs When recording these discs on a VCR picture noise will appear during playback This product incorporates copyright protection technology that is protected by certain U S patent claims and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Official DivX Certified product Plays all versions of DivX including DivX 6 video with standard playback
45. the operation is cancelled CONVENIENT FUNCTIONS Displaying the time information Press TIME during playback Each time this button is pressed an information box is displayed on TV screen to indicate the status of the time displayed on the VFD display If SINGLE ELAPSED is displayed the VFD display on the unit shows the elapsed time for the track that is being played If SINGLE REMAIN is displayed the VFD display on the unit shows the remaining time for the track which is being played If TOTAL ELAPSED is displayed the VFD display on the unit shows the elapsed time for the disc which is being played If TOTAL REMAIN is displayed the VFD display on the unit shows the remaining time for the disc which is being played Program Function Press PROGRAM button to select program mode in stop mode Enter track numbers that you want to add to program list For the track numbers which are greater than 9 use 10 button Each press increases the number by 10 Then type the second digit of track number Press ENTER button to finish the program entry Screen is cleared and it will start playing the program list NOTE f you attempt to enter a number greater than the total number of tracks on disc the search box disappears and V symbol appears on up left corner of screen You can remove the last track of the play list by pressing the CLEAR button The program is cancelled w
46. tput to an AV amplifier with a built in Dolby Digital or DTS decoder By using 6 speakers user can enjoy the 5 1 channel surround sound NOTE When this unit is connected to a separate Decoder Box or Amplifier through the DIGITAL AUDIO OUT connector you may sometimes hear a short noise when selecting the sound system in the DVD Menu This is not a malfunction TV RCA type AV cable DVD Player to RCA Video on TV Coaxial audio cable to coaxial digital audio input connector gt Amplifier FRONT SPEAKER FRONT SPEAKER LEFT RIGHT CENTRE SPEAKER SUBWOOFER REAR SPEAKER REAR SPEAKER LEFT RIGHT FITTING BATTERIES IN YOUR REMOTE CONTROL First open the battery cover on the underside of the remote control Fit both batteries 1 5Volt RO3 AAA referring to the imprinted symbols in the battery case and put on the battery cover again While using the remote control direct it towards the front of the DVD player If the remote control does not work or the chosen function could not be made the batteries are most probably exhausted and they should be replaced as soon as possible Please use only leak proof batteries If you will not be using your remote control for a long time it is recommended to take out the batteries from your remote control REMOTE CONTROL FUNCTIONS MENU
47. tray closes and play commences if the disc does not have any menus recorded on it A menu may appear on the TV screen after a few moments or the film may start immediately This behaviour depends on the disc content and may change NOTE Steps 5 and 6 are available only when a menu is recorded on the disc 5 Press 3 4 6 5 or the number button s to select the preferred title 6 Press ENTER Playback of the selected item now starts The played item may be a motion picture a still picture or another submenu depending on the disc NOTE When using menus the disc controls the behaviour of the player For stopping play and returning to the menu screen when amenu is available on the disc press MENU or TOP MENU button depending on the disc Play is suspended and the Disc menu screen is displayed After operation When the unit is not in use remove the disc and press ON STANDBY to turn the unit to standby mode NOTE The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item When no further selections are to be played be sure to press the STOP button to clear the menu display f the disc is placed upside down and it is a single sided disc TV screen will display either NO DISC or DISC ERROR 20 For your reference When appears while a button is being pressed it means that the corresponding operation is p
48. ure the remote control is in the correct mode e Check whether the batteries are fitted correctly e Change the batteries Operate the remote control within 30 angle on either side of the remote control sensor up to a distance of approximately 6 metres Operate the remote control on a straight path of the remote control sensor up to a distance of approximately 7 metres If nothing works If you have tried the above solutions and none seem to work try switching your DVD off and on again If this does not work contact your supplier or DVD repair technician Never attempt to repair a defective DVD yourself SPECIFICATIONS DVD VCD SVCD CD DA CD R CD RW MP3 MPEG JPEG MPEG 4 DivX player 220 240V 50 Hz Standby mode 6W 56 mA Requirements Auto Adjustable Power ON mode 12W 100 mA DVD DVD R DVD RW Video SS SL 4 7 DVD 5 ypes orme RT P3 Supported DS DL 4 7 DVD 18 VCD SVCD CD DA CD R CD RW MP3 CD R MPEG 1 2 4 JPEG CD R DivX 3 4 5 CD R DVD R RW MPEG 2 Digital Video Standard Decoding MPEG 4 supported Video Type Full screen video display of 720 x ue li 8 20 x 480 NTSC pixels 0 and 60 Hz frame refresh rates eli Digital bit stream processing rate up ib 00 08Mbits sec for DVD 8x1 411Mbits sec for CD Line resolution more than 500 lines Video Output Analog Video With using 4 x 10 bits 54MHz video DACs CVBS PAL NTSC Negative synchronised 1Vpp 75
49. witched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand by mode Switch off using the switch on the equipment and make sure that your family know how to do this Special arrangements may need to be made for infirm or handicapped people DON T continue to operate the equipment if you are in any doubt about it working normally or if it is damaged in any way switch off withdraw the mains plug and consult your dealer ABOVE ALL NEVER let anyone especially children push anything into holes slots or any other opening in the case this could result in a fatal electrical shock NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry Choice of Location Please do not place the set in a place subject to direct sunlight excessive dust or mechanical shock or in a location near heat sources The set should be placed on a solid and safe base Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom A location should not be selected such as a room with high humidity as the condensation arising in the kitchen for example may cause malfunction or damage the set Heating or other thermal radiation under the set also may cause malfunction or damage the set The hot air which arises during the operation should be ventilated with sufficient air circulation Please do no
50. yed Instant Skip Backward Only for DivX files Press3 4 key for instant skip backward during DivX files playback Image transformation Only for JPEG Press PLAY PAUSE to start slide show There are three modes of transformation Invert Mirror Left Right These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when new picture is displayed The arrow keys are used to select the different transformation modes Press 5 to invert normal Press 6 to mirror Press 3 to turn left Press 4 to turn right Zoom Only for JPEG Press PLAY PAUSE to start slide show It is provided both ZOOM in out and Zoom pan functions for JPEG pictures Press ZOOM to turn ON OFF this function When this mode is on any picture will be displayed at the last ratio selected by the user A message will indicate the current ratio on screen If zoom mode is ON Press REV 7 or FWD 8 tocontrol the ratio of zoom in out NOTE During ZOOM function image transformation is disabled Repeat Modes Press PLAY MODE to change current repeat mode Repeat mode is displayed In SMART NAVI it is displayed at the bottom Displaying The Time Information Press TIME to change displayed time mode 28 Program Function Press PROGRAM to select program mode in stop mode PROGRAM Message appears Press number buttons to select files in the curr
Download Pdf Manuals
Related Search
Related Contents
Tut Systems XL-12000B User's Manual Install the Device Drivers ASUS Asus Computer Hardware CUBX-L User's Manual 取扱説明書 - 流体工業 Mode d`emploi S-ENERGy CableWholesale RJ-11, 14ft AB5 and AB51 Drivers User Manual LG VX8300 Quick Start Guide Copyright © All rights reserved.
Failed to retrieve file