VIORE LED22VF60 Flat Panel Television User Manual
Contents
1. Reset RRT Allow you to reset the RRT setting 18 OSD Menu 6 Channel menu Air Cable Auto Scan Favorite Show Hide Channel No Channel Label DTV Signal Select Move menu Exit Description Air Cable Allow you to select antenna between Air and Cable If you selet Cable the following items Favorite Show Hide Channel NO Channel Label and DTV Signal are unable to use Auto Scan Enter the Auto Scan menu to start auto scan If you select Cable as input signal in Antenna item allows you to select Cable System among Auto STD IRC and HRC Use V button to highlight the Start to Scan then press gt button to search the channels automatically The receivable channels will be stored automatically When searching channels press MENU to stop X If you select Air as input signal in Antenna item you can press gt button to search the channels automatically The receivable channels will be stored automatically When searching channels press MENU to stop NOTE It will take a while to auto scan in NTSC or ATSC mode please wait patiently Use A V button to highlight the desired item then press OK button to add or remove the highlighted channel as favorite O _ Proyram Name Fuvurlis ATSC 1 ATSC 2 ATSC 3 KOCE HD KOCE SD KOCE LB e Press OK change GD Move 19 OSD Menu Show Hide Allow you to show or hide the channels Use A V button to hi2. VOL to unmute MENU Press to display the OSD menu EXIT Press to exit the OSD menu Thumbstick lt gt AV Allows you to navigate the on screen menus and adjust the system settings to your preference OK CONFIRM button 12 Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below eee e O gt Picture Mode Standard Main menu Picture Audio Time Setup Lock Channel Contrast 50 Brightness 50 Color Submenu Picture menu for example Tint Sharpness Color Temp Normal Hint you should operate the OSD menu according to the hint Select Move MENU Exit Use lt gt button to select the main menu and press V button to enter the submenu In the submenu use V button to select the function item and you could adjust Contrast item in Picture menu for example with lt gt button select Picture Mode item in Picture menu for example with lt gt button enter the submenu Close Caption item in Setup menu for example with gt button Press MENU button to return to the upper menu Press EXIT button to exit the menu display Note1 Only when you input the suitable signal the relevant items can be activated Note2 Please operating the OSD menu according to hint on the bottom of the banner 13 OSD Menu OSD Menu 1 Picture menu e Setup Lock Channel Picture Mode Standard Contrast Bright
3. gt XVS Activate deactivate the automatic dynamic brightness function Restore Default Restore all settings in SETUP menu to factory settings 17 OSD Menu 5 Lock menu You must enter the password to gain access to the Lock menu The default password is 0000 You may modify the following options Change Password System Lock US Canada RRT Setting Reset RRT Move Next Exit Description Change password Change the password you must enter the new password twice to confirm it Note Do not forget the password Lock Allow you to turn on or off the system lock If deactivated the functions described below don t work This option menu allows you to lock any TV channel or adjust the Movie rating filter US TV Use A V buttons to select the desired rating and press gt button to block or unblock rating OHER El V_ RATING 1 gt __ EEE BT HC CA BEN N BCE o i MPAA The Movie rating MPAA is used for original movies rated by the Motion Picture Association of America MPAA younger viewers oe ae age of 13 ed ited for television Restricted Contains adult content no one under 17 admitted without Use A V button to select N A G BER PG PG 13 R NC 17 or X No one 17 and under admitted Adults only Canada Canada English Select among E C C8 G PG 14 and 18 Canada French Select among E G 8ans 13ans 16ans and 18ans
4. the literature accompanying the appliance Waste Electrical amp Electronic Equipment WEEE Your product is designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the USA there are separate collection systems for used electrical and electronic products Please help us to conserve the environment we live in E Correct disposal of this Product PA NTE i E This unit complies with America Safety directives 3124140 CONFORMS TO UL STD 60065 FC This unit complies with FCC directives Safety In formation Safety Information To ensure reliable and safe operation of this equipment please read carefully all the instructions in this user guide especially the safety information below Electrical safety e The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor e To prevent overload don t share the same mains supply socket with too many other items of equipment Do not place any connecting wires where they may be stepped on or tripped over Do not place heavy items on the leads which may damage them Hold the Mains plug not the wires when removing from a socket During a thunders
5. will occur to the internal parts Fit the wall bracket securely following the manufacturer s instructions 3 Remote Control Introduction The remote control is using Infra Red IR Point it towards the front ofthe LCD TV The remote control may not work correctly if it is operated out of range or out of angle PICTURE J2 SOUND SLEEP DISPLAY POWER red button Turn the TV on standby INPUT Press to display the input source menu Number Buttons Choose channel directly Select channel 5 Press button 5 Select channel 62 Press button 6 then press button 2 in 2 seconds Select channel 151 Press button 1 and press button 5 in 2 seconds and press button 1 in 2 seconds Select channel 5 1 Press button 5 and press button in 2 seconds and press button 1 in 2 seconds CD RETURN Return to the previous channel viewed PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Shutdown timer DISPLAY Display the information of current mode VOL Press to adjust the volume CH Press to scan through channels MUTE Press to mute the sound press again or press VOL to unmute MENU Press to display the OSD menu EXIT Press to exit the OSD menu Thumbstick lt gt AV Allows you to navigate the on screen menus and adjust the system settings to your preference OK CONFIRM button C
6. C Press to display the closed caption MTS Press to select the audio channels EPG Press to enter the EPG menu directly FAV Press to add or remove favorite channel Introduction Installing Batteries 1 Open the battery compartment cover on the back of the remote control 2 Insert two 1 5V AAA size batteries observing the polarity markings inside the battery compartment Don t mix different types or used batteries with new ones 3 Close the cover IN Batteries shall not be exposed to excessive heat such as sunshine or fire The remote control should be operated within 30 feet 7m and 30 to the left and right of the IR receive at the front of the LCD TV Used batteries should be disposed properly Connection Connection Power Cord Connection Connect to the power supply correctly as shown with the mains cable and mains adaptor When you connect the power the TV set comes into standby mode and the LED indicator Page 5 lights red You could bring the TV out of standby mode by press the POWER button on TV set page 5 or remote control page 7 and the LED indicator lights green Antenna RF Connection Pr Video L in R in 6 6666 Wall jack with F Connector Coaxial Round Antenna Cable Press INPUT button on the remote control to display the input source menu press A V butt
7. VIORE TECHNOLOGY amp INNOVATION OPERATING INSTRUCTIONS 24 1080p LCD Television with LED backlight LED24VF60 AIR TV CABLE MODE SELECTION The Air CABLE menu option is set to the CABLE Cable Television mode at the factory If you want to use an antenna for the built in TV tuner this menu option must be set to the Air mode Please refer to page 19 of the owner s manual for the details of this menu FOR QUESTIONS OR TECHNICAL SUPPORT PARA PREGUNTAS O APOYO TECNICO Please call Favor de llamar al 1 877 777 1428 puenronico Please do not return this TV to the store Por Favor NO Regrese este Televisor a la Tienda Contents Caution Safety Information Unit and Accessories Product Feature Introduction 1 Front View 2 Rear View 3 Remote Control Connection Basic Operation OSD Menu 1 Picture menu 2 Audio menu 3 Time menu 4 Setup menu 5 Lock menu 6 Channel menu Simple Troubleshooting Technical Specifications Contents Caution Caution The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance servicing instructions in
8. e power with a mains cable and an adaptor page9 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control Input Source select Press INPUT button on the TV set or remote control to display the input source menu and use CH button on the TV set or A V button on TV remote control to select the input source press OK button on the AV remote control to enter Component Note Before you select the input source make sure the HDMI1 connections are prepared HDMI2 VGA Basic buttons on the remote control POWER red button Turn the TV on standby INPUT Press to display the input source menu Number Buttons Choose channel directly Select channel 5 Press button 5 Select channel 62 Press button 6 then press button 2 in 2 seconds Select channel 151 Press button 1 and press button 5 in 2 seconds and press button 1 in 2 seconds Select channel 5 1 Press button 5 and press button in 2 seconds and press button 1 in 2 seconds CC RETURN Return to the previous channel viewed PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Shutdown timer DISPLAY Display the information of current mode VOL Press to adjust the volume CH Press to scan through channels MUTE Press to mute the sound press again or press
9. ghlight the desired item then press OK button to show or hide the highlighted channel Move Press OK change Channel No Show and select the channel Channel Label Allow you to setup a label for the channel Press lt gt button to select the position of the table and press A V button to select the words DTV Signal Show the quality of digital signal good Normal Bad 20 Simple T roubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions Remember to check the peripherals topinpiont the source of the failure If the display still fails to perform as expected connect your helpline for assistance No power Check all connections to the TV Press either the power button or the Standby button on the Remote control No picture or sound Ensure that the TV is plugged in and the power is on Ensure that the aerial is connected Try a different programme Poor picture quality Check the aerial connections Check that the channel is tuned in properly Adjust the picture settings brightness colour sharpness contrast hue Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference No colour Adjust the colour setting Check that the programme is broadcast in colour Check that the cannel is tuned properly TV does no
10. he TV set with a HDMI cable Turn on the DVD and select HDMI1 2 in the input source menu HDMI High Definition Multimedia Interface is the first all digital consumer electronics A V interface that supports uncompressed standard One jack supports both video and audio information PC Connection Note All cables shown are not included with the TV 11 HDMI2 VGA PC IN Coax Headphone ur eo o lf using a sound card adjust the eupported PC resolutions PC sound as required a f 640 x 480 60 Hz PC audio Set the video resolution of your 640x480 72 Hz VGA cable cable PC to 1024x768 60Hz on its 640 x 480 75 Hz original monitor 800 x 600 75 Hz Make the connections between 800 x 600 60 Hz i i 800 x 600 72 Hz the TV monitor and your PC z A 1024 x 768 60 Hz switch on the monitor before 1024 x 768 70 Hz booting the PC ra Ia O You can now set your preferred ED A 3 lan resolution from the choice supported See the table of supported resolutions on the right 1920 x 1080 60Hz Connect the RGB jack on the PC to the VGA jack on the TV set with a VGA cable Connect the audio output jack on the PC to the PC IN jack on the TV set with a stereo audio cable Turn on the PC and select VGA in the input source menu 11 Basic Operation Basic Operation Power on off 1 Connect to th
11. ness Color Sharpness gt Color Temp Normal AV Select Move MENU Exit Description a TFT EEE Picture mode Select between Standard Dynamic Mild Sports and User You may select the picture mode directly by pressing the PICTURE button on the remote control Contrast Control the difference between the bright and dark regions of the screen picture Brightness Adjust brightness of the picture Color Adjust color of the picture Tint Control the fresh tones to make them appear natural Sharpness Set the amount of fine detail in the picture Color Temp Select between Normal Cool and Warm 14 OSD Menu 2 Audio menu Picture E ud Time eleje gt Sound Mode Bass 50 Treble DI 50 Balance 50 Surround lt Off Audio Language lt English Select MENU Exit Description Sound Mode Select your desired picture mode as follow Flat Music Movie Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control Bass Low frequencies intensity Treble High frequencies intensity Balance Left and right stereo audio channels balance Surround Activate or deactivate the Surround function Audio Language Select audio language 15 OSD Menu 3 Time menu m Picture 1 Setup Channel Sleep Timer Time Zone Pacific Daylight Saving Time lt Off Select Exit Description Sleep timer You may set the aut
12. omatic shutdown timer choosing from 5 to 240 minutes or deactivate this function Time zone Select between Pacific Alaska Hawaii Eastern Central and Mountain Daylight Saving Time Select between On and Off OSD Menu 4 Setup menu Lock Channel Menu Language English Transparency Off Zoom Mode 16 9 Noise Reduction Off PC SETUP Closed Caption XVS Restore Default ATA A VON Vy Select Exit Description Menu Language Select OSD menu language Transparency Turn on or off the transparency menu function Zoom Mode Select the zoom mode between 16 9 16 9 zoom 4 3 4 3 zoom Noise reduction Select the noise reduction mode between Strong Off Weak and Middle PC SETUP If the video input signal comes from your PC you may adjust the V Position H Position Frequency Phase or even perform an Auto adjustment _W_____ gt Closed Caption CC Mode Allow you to select the CC Mode among On Off and CC on Mute a Basic Selection Allow you to select the basic selection among ee abi CC1 CC2 CC3 CC4 Text1 Text2 Text3 and Text4 Advanced Selection Allow you to select the advanced selection among Service1 Service2 Service3 Service4 Service 5 and Service 6 Option Use thumbstick buttons to operating in option menu as your desire Select aa Exit Font Edge Style Font Edge Color FG Color BG Color FG Opacity BG Opacity gt gt gt gt gt gt gt gt
13. on to select TV then press OK button to confirm and you will receive the signal Connection AV Input Connection Note All cables shown are not included with the TV Y Pb Pr Video L in R in 00000 RCA Video Cable eee O DVD or VCR E Connect the VIDEO and AUDIO output jacks on the DVD or VCR to the AV IN jacks on the TV set with a RCA cable Match the jacks colors Video yellow Audio left White Audio right red Turn on the DVD VCR and select AV in the input source menu YPbPr Connection Note All cables shown are not included with the TV Y Pb Pr Video L in R in ce Audio Cable ISO SSSSSSSSS YPbPr Cable Y DVD or VCR ooo O Connect the YPbPr output jacks on the DVD or VCR to the YPbPr input jacks on the TV set with a YPbPr cable The picture quality is improved compared to a regular VCR to the video input Match the jacks colors Y Green Pb Blue Pr red Connect the audio output jacks on the DVD or VCR to the audio input jacks on the set with an audio cable Turn on the DVD VCR and select YPbPr in the input source menu 10 Connection HDMI Connection Note All cables shown are not included with the TV HDMI1 HDMI2 VGA PC IN Coax Headphone w omo e gt eee O DVD or VCR E Connect the HDMI jack on the DVD to the HDMI jack on t
14. on the TV set or remote control to display the input source menu and use CH button on the TV set or A V button on remote control to select the input source press OK button on the remote control to enter Note Before you select the input source make sure the connections are prepared Introduction 2 Rear View UIID POWER USB HDMI1 HDMI2 VGA PC IN Coax Headphone O ww cee 0 1 2 3 4 5 6 7 POWER Connect to the mains adaptor USB For update the soft HDMI1 2 Connect it to the HDMI of DVD or other equipment VGA For PC display Connect it to the D Sub 15 pins analog output connector of the PC PC IN Connect it to the audio output terminal of PC Coax Digital coaxial output Headphone Connect it to your headphone or other audio equipment YPbPr Connect them to the YPbPr video output terminal of DVD used in component source VIDEO Connect it to video output terminal of DVD 10 R L in Connect them to the audio output terminal of DVD shared with YPbPr 11 RF Connect antenna or cable 75 Ohm coaxial to receive TV signal OMNAMARWNS Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket NOT SUPPLIED Remove the pozi screws holding the base to the base bracket and lift the base away do not remove the base mounting bracket Mount the VESA bracket using 4 x M4 x10 Iso metric threaded screws not supplied Do not use screws longer than 10 mm damage
15. ssories TV set User s Manual User s manual Remote control Mains adaptor Mains cable Batteries 2xAAA Product Feature 21 6 measured diagonally wide screen for a complete home theater experience Energy Saving Eco TV more natural colors and better picture quality than conventional LCD TVs with less power consumption Made of 95 recyclable materials 1920 x 1080 native resolution for Full HD 1080p performance Integrated ATSC TV tuner for HDTV broadcast reception Dual HDMI input for true digital connections VGA port for connection to PC Introduction Introduction 1 Front View O MENU CH CH VOL VOL INPUT POWER o Led Indicator ORemote Control window Keep clear 1 IR Infrared Receiver Receives IR signals from the remote control Power on Standby LED Indicator Press POWER to turn on and off Indicator on Red Standby mode Indicator on Green Power on mode The effective receiving range for the signal is 5 8 metres from the front of the remote control window and 30 to the left or right side and 20 above or below the remote control window 2 The functions of the buttons INPUT Press to display the input source menu MENU Press to display the OSD menu press again to exit the menu an CH Press to scan through channels HDMI2 VOL Press to adjust the volume ER POWER Turn on standby the TV set TV Component Press INPUT button
16. t respond to remote control Check that there are no obstructions between the remote control and the unit Check that the remote control is within range of the unit Check that the batteries in the remote control and not weak or exhausted This LCD TV is for household use and registered as harmless on electromagnetic waves Therefor you can use it in every location as well as residential areas 21 Technical Specifications Technical Specifications Product specifications and appearance are subject to change without notice 22 VIORE Inc 7801 Hayvenhurst Avenue Van Nuys California 91406 Printed in China
17. torm or while leaving the TV for long periods disconnect the aerial if outdoor and mains adaptor from the supply Do not allow water or moisture to enter the TV or mains adaptor Do NOT use in wet or moist areas such as Bathrooms steamy kitchens or near swimming pools Pull the plug out immediately and seek professional help if the mains plug or cable is damaged liquid is spilt onto the set or if it is accidentally exposed to water or moisture anything accidentally penetrates the ventilation slots the set does not work normally Do NOT remove the safety covers There are no user serviceable parts inside You may invalidate the warranty Qualified personnel only are permitted to service this apparatus To avoid battery leakage remove exhausted batteries from the remote control handset or when not using for along period Do NOT break open or throw exhausted batteries on a fire Physical safety e Do NOT block ventilation slots in the back cover You may place the TV in a cabinet but ensure at least 5cm 2 clearance all around the unit e Do NOT tap or shake the TV screen you may damage the internal circuitry Take good care of the remote control do not drop it or allow it to come into contact with liquids e To clean the TV use a soft dry cloth Do NOT use solvents or petrol based fluids For stubborn stains you may use a damp soft cloth with diluted detergent Unit and Accessories and Product Feature Unit and Acce
Download Pdf Manuals
Related Search