Uniden EXP6900 Cordless Telephone User Manual
Contents
1. easily access long distance services 1 Remove the handset from the base and press mem The talk LED flashes 2 Enter the number to be dialed in pulse mode 3 Press the one button on the handset The tone button counts as one digit and enters a pause 4 Enter the number s to be dialed in tone mode 5 Press mem and a number 0 9 on the keypad for the memory location you wish to use You hear a long beep and the talk LED goes out Dialing a Stored Number To dial a phone number stored in memory press talk then press mem and the memory location 0 9 Your phone will dial the stored number If you select a memory location that does not have a stored number the handset will beep rapidly and the phone will not dial One Touch Dialing Your phone is equipped with three One Touch Priority keys for instant dialing m1 m2 and m3 You cannot store phone numbers directly into m1 m2 and m3 They are only used to dial phone numbers stored into memory locations 1 2 and 3 on the keypad 1 To instantly dial phone numbers stored in memory locations 1 2 or 3 simply press m1 m2 or m3 There is no need to press talk the phone will automatically dial 2 If no phone number was stored in memory locations 1 2 or 3 on the keypad pressing m1 m2 or m3 will do nothing Chain Dialing After dialing a number you may be requested to enter a special access code for example when performing a banking transa2. end of the telephone cord into the telephone wall jack Remember the phone must be fully charged before you can use it a Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch Use only the AC adapter that came with the phone 7 Raise the antenna on the base Wall Installation W Setting the Handset Retainer for Wall Mounting Remove the handset retainer on the base by sliding it upward Flip the retainer over so the tab is facing up Slide the retainer back onto the base Les W Mounting on a Standard Wall Plate The phone is designed to be mounted on a standard wall plate 1 Plug the AC adapter into the base 2 Place the AC adapter cord inside the left molded channel cord holder 3 Plug one end of the telephone cord into the TEL LINE jack on the base A Place the telephone cord into the right molded channel cord holder and plug the other end of the cord into the wall jack Remember the phone must be fully charged before you can use it Ww Place the base on the two posts of the wall plate and slide downward to secure 6 Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch Use only the AC adapter that came with the phone 7 Raise the antenna on the base W Mounting Directly on a Wall If you do not have a standard wall plate you can mount the
3. phone directly on a wall Before mounting your cordless telephone consider the following Select a location away from electrical cables pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall Make sure the wall material is capable of supporting the weight of the base and handset otherwise damage to the unit could result Use 10 screws minimum length of 1 3 8 inches with anchoring devices suitable for the wall material where the base will be placed 1 Insert the screws with 3 16 in their appropriate anchoring devices 3 15 16 inches apart N Allow 3 16 of an inch between the wall and screw 3 15 16 in heads for mounting the phone 2 Plug the AC adapter into the base Place the AC adapter cord inside the left molded channel cord holder Plug one end of the long telephone cord into the TEL LINE jack on the base Place the telephone cord into the right molded channel cord holder Place the base on the screws and push down until it s firmly seated Plug the other end of the telephone line into the telephone wall jack Remember the phone must be fully charged before you can use it Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch Use only the AC adapter that came with the phone Raise the antenna on the base Set
4. 5 930 720 5 960 358 5 987 330 May 2000 Uniden America Corporation All rights reserved Printed in China UCZZ01283GZ
5. 900 Series phone has 10 memory locations for storing important telephone numbers 1 Remove the handset from the base and press mem The talk LED flashes 2 Enter the phone number you want to store up to 16 digits You have 20 seconds after pressing mem to enter the number you wish to store Otherwise an error tone will sound 3 Press memand enter a number 0 9 on the keypad for the memory location you want to use You hear a long beep and the talk LED goes out indicating the number has been stored successfully If you select any keys other than 0 9 the handset will beep rapidly and no number will be stored You cannot store numbers in m1 m2 or m3 Refer to One Touch Dialing Entering a Pause in Memory Dialing If you would like to use a phone number stored in memory to access voice mail for example you can store a pause in the phone number sequence To use this function follow steps 1 and 2 in Storing a Number in Memory then press the pause button on the handset to place a pause in the phone number sequence Remember the phone number you wish to store cannot have more than 16 digits including the pause The pause button counts as one digit Follow the remaining steps in the Storing a Number in Memory section to complete the operation Storing Mixed Tone Pulse Numbers If your phone is set up for pulse dialing you can store a mixed mode number up to 16 digits to
6. AutoSecure feature electronically locks your phone when the handset is in the base To get the most from your phone please read this owner s manual thoroughly Also be sure to complete the product registration form and mail it in Be sure to visit our web site at www uniden com Included with Your EXP 6900 Series Phone Rechargeable Battery AC Adapter Telephone Cord Also included e This Owner s Manual e Other Printed Material e Precautions and Important Safety Instructions If any of these items are missing or damaged contact the Uniden Parts Department at 800 554 3988 7 00 a m to 5 00 p m Central Monday through Friday or contact us on the web at www uniden com Controls and Functions 1 talk answers or places calls 2 tone switches to tone dialing in pulse dial mode 3 redial redials the last number 4 pause adds a timed pause in a memory dialing sequence 5 talk batt LED indicates when phone is in use or the battery is low 6 flash accesses call waiting if available 7 mem enters or recalls numbers in memory 8 volume sets both the ringer and earpiece volumes 9 chan selects another channel for clearer reception 0 m1 m2 m3 accesses stored numbers in memory locations 1 2 and 3 for one touch dialing 1 handset retainer holds handset in base for wall mounting 2 status LED indicates the phone is in use or the hands
7. EXP 6900 SERIES The EXP 6900 Series Cordless Phones offers you outstanding performance and unparalleled clarity Uniden Contents Introduction 005 2 e Adjusting Ringer Volume Controls 8 FCATIRCS yi dapan oina ENERET N A 2 Ringer Tone and Volume 8 Included with Your EXP 6900 Series Setting the Handset Earpiece Volume 8 PRONG 55 jo d cera eis sio aes a eee wees 3 Using Your Phone 8 Controls and Functions 4 e Making and Receiving Calls 8 Installation 0 0000 e eee 5 Storing a Number in Memory PANPE 8 e Charging the Battery Pack 5 e Entering a Pause in Memory Dialing 9 Charging the Handset 5 e Storing Mixed Tone Pulse Numbers 9 Low Battery Indicator 5 e Dialing a Stored Number 9 Cleaning the Battery Contacts 5 e One Touch Dialing 9 e Selecting a Location 5 e Chain Dialing o on 9 Setting the Dial Mode 5 e Erasing a Stored Number 10 e Desk or Tabletop Installation 6 e Replacing a Stored Number 10 e Wall Installation 0 00 6 Selecting a Different Channel 10 Setting the Handset Retainer for Wall e Using the Flash Button 10 Mounting A a S N 6 e Using the Page Find Feature 10 Mounting on a Standard Wall Plate 6 e Traveling
8. Out of Range 10 Mounting Directly on a Wall 7 Troubleshooting 11 Setting Up Your Phone 8 e Raising the Antenna 8 Introduction The Uniden EXP 6900 Series 900 MHz cordless phones are designed and engineered to exacting standards for reliability long life and outstanding performance W Features 900 MHz Extended Range Technology 30 Channel Autoscan 10 Number Memory Dialing 3 One Touch Priority Keys Desk or Wall Mountable Tone Pulse Dialing Handset Volume Control 32 Digit Redial Page Find AutoTalk AutoStandby 7 Hours Talk Time Hearing Aid Compatible The EXP 6900 Series features include AutoTalk and AutoStandby AutoTalk allows you to answer a call by just removing the handset from the base so you don t have to waste time pushing buttons or flipping switches AutoStandby allows you to hang up by simply returning the handset to the base The UltraClear Plus true compander circuitry virtually eliminates background noise This innovative technology together with 30 different channels provides you with the best possible reception during all oud conversations To protect you against misbilled calls which might result from your phone being activated by other equipment the EXP 6900 Series has Random Code digital security which automatically selects one of over 65 000 digital security codes for the handset and base Also the
9. ction 1 Store the access code into one of the memory locations 0 9 2 Dial the main number 3 Press mem and the memory location of the access code at the appropriate time Erasing a Stored Number 1 Remove the handset from the base 2 Press mem twice 3 Press the memory location number 0 9 you want to clear You hear a long beep confirming that you have erased the number Replacing a Stored Number Remember your EXP 6900 Series phone has 10 memo locations represented by the numbers 0 9 on the keypad If you store a phone number in one of these locations then attempt to store a different number in the same location later the new number will replace the previous one Selecting a Different Channel If you encounter interference while using your o you can manually change the phone channel or clearer operation Interference can come from appliances or other phones in your home This function works only when the phone is in use The chan button on the handset allows you to choose between 30 factory set channels During the course of a conversation if you hear static or noise which makes it difficult to hear press chan The talk LED flashes indicating the phone is changing to another channel Using the Flash Button Use flash for accessing services such as call waiting If you receive a call during your conversation press the flash button on the handset Press flash again to return to the previous ca
10. et is charging 3 page find locates the handset ton Z Owe GD Installation Charging the Battery Pack The rechargeable nickel cadmium battery pack must be fully charged before using your phone for the first time Before plugging the phone line into your new phone you must charge the battery for approximately 15 20 hours without interruption 1 Remove the handset battery cover 2 Plug the battery s cable into the w handset and place the battery pack inside the on battery compartment The plastic connectors will fit together only one way Make sure the battery s connector is properly aligned Use only the Uniden battery pack model BT 905 3 Replace the battery cover W charging the Handset Place the handset on the base to charge The handset can charge in either the face up or Jacedown position Wow Battery Indicator When the battery pack in the handset is low and needs to be charged the batt LED flashes every 3 seconds If this occurs while you are on the phone you will hear an alert tone Complete your call as quickly as possible and return the handset to the base for charging W Cleaning the Battery Contacts To maintain a good 22q charge it is important UZ g to clean all battery contacts on the handset and base about once a Contacts month Use a dry cloth or pencil eraser if nece
11. ll Using the Page Find Feature The Page Find feature sends a signal from the base to the handset causing it to beep This is useful for locating the handset when it is away from the base To use this feature press page find on the base The handset beeps for 60 seconds A On the handset press any key to end the page If you press talk you must press talk again if you do not wish to make a call The paging feature does not work when the phone is in use Traveling Out of Range During a call as you begin to move too far from your base unit noise increases If you pass the range limits of the base your call will terminate within 30 seconds 10 Troubleshooting If your EXP 6900 Series cordless telephone is not performing to your expectations Vase try these simple steps l If you are still unable to resolve the problems contact your place of purchase or ca 800 297 1023 customer service at Caution Do not attempt to service this unit yourself Servicing must be performed by qualified personnel Problem Suggestion The status LED won t come on when handset is placed in base Make sure the AC adapter is plugged into the base and wall outlet Make sure the handset is properly seated in the base Make sure the rechargeable battery pack is properly connected in the handset Make sure that the charging contacts on the handset and on the base are clean The audio sounds weak and or
12. scratchy Make sure that the base antenna is in the vertical position Interference by other electronic equipment such as TVs computers microwave ovens etc The handset may be too far away from the base Press chan during the call to improve reception Can t make or receive calls Check both ends of the telephone line cord Make sure the AC adapter is plugged into the base and a wall outlet Disconnect the AC adapter for a few minutes then reconnect it Reset security code by placing the handset back on the base for a few seconds The status LED will blink indicating that the phone has been reset Handset doesn t ring or receive a page Gu The nickel cadmium battery pack may be weak Charge the battery for 15 20 hours X The handset may be too far away from the base Place the base away from appliances or metal objects Reset security code by placing the handset back on the charging cradle for a few seconds The status LED will blink indicating that the phone has been reset 11 Z 3 I am z ie Z lt N lt a Ss Z am oe oH Uniden Covered under one or more of the following U S patents 4 511 761 4 523 058 4 595 795 4 797 916 5 381 460 5 426 690 5 434 905 5 491 745 5 533 010 5 574 727 5 650 790 5 660 269 5 661 780 5 663 981 5 671 248 5 717 312 5 754 407 5 768 345 5 787 356 5 838 721 5 864 619 5 893 034 5 912 968 5 915 227 5 929 598
13. ssary Do not use any liquids or solvents Selecting a Location Before choosing a location for your new phone there are some important guidelines you should consider The location should be close to both a phone jack and continuous power outlet A continuous power outlet is an AC outlet which does not have a switch to interrupt its power Keep the base unit and handset away from sources of electrical noise such as motors and fluorescent lighting Be sure there is sufficient space to rotate the Base Unit antenna to the vertical position Important Do not place the power cord in an area where it may create a trip hazard or become chafed and create a fire or electrical hazard Setting the Dial Mode Most phone systems use tone dialing Depending on your dialing system set the mode as follows 1 Press and hold flash until you hear a confirmation tone 2 To set the dial mode for pulse dialing press Or to set the dial mode for tone dialing press tone A confirmation tone sounds again to indicate the setting is complete Desk or Tabletop Installation 1 Plug the AC adapter cord into the 9V DC input jack on the base 2 Wrap the AC adapter cord inside the molded strain relief ww Plug one end of the telephone cord into the TEL LINE jack on the base A Place the telephone cord into the right molded channel cord holder v Plug the other
14. ting Up Your Phone Raising the Antenna Before using your phone be sure to raise its antenna to the vertical position Adjusting Ringer Volume Controls WRinger Tone and Volume 1 While the phone is not in use press volume 2 The phone has two ringer tones each with two volume levels Press volume again until you hear the ringer tone and volume level you want WSeiting the Handset Earpiece Volume 1 While you are on a call press volume 2 The phone has three receiver volume levels normal high and loud Press volume again until you hear the volume level you want When you hang up the phone keeps the last volume setting selected Using Your Phone Making and Receiving Calls Handset on Base Handset off Base Answer When the phone rings remove the handset Press talk call from the base AutoTalk 1 Remove the handset from the base and 1 Pick up the handset and press talk press talk 2 The talk LED lights Make call 2 The talk LED lights 3 Listen for the dial tone 3 Listen for the dial tone 4 Dial the number 4 Dial the number Hang up Return handset to the base Au oStandby Press talk 1 Remove the handset from the base and 1 Pick up the handset and press talk press talk 2 Listen for the dial tone Redial a 2 Listen for the dial tone 3 Press redialto dial the number 3 Press redialto dial the number Storing a Number in Memory Your EXP 6
Download Pdf Manuals
Related Search