Home

Toshiba M35 Series Laptop User Manual

1. Posio 0 00 sec 0 00 sec m Positioning bar Sample Sound Recorder screen 3 Click the Record button 4 Speak normally into the microphone 5 When you ve finished recording click the Stop button 1 3 4 Enhancing Productivity Exploring audio features The Sound Recorder window displays the new sound file as a waveform NOTE You can only record 60 seconds at a time 6 To hear what you just recorded click the Play button 7 To save the file select Save from the File menu Adjusting recording quality The better the quality of the recording the more disk space the sound file requires Experiment to find a balance that fits your needs 1 Open Sound Recorder if necessary Click Start point to All Programs Accessories Entertainment then click Sound Recorder 2 Inthe Sound Recorder window click Edit then click Audio Properties 3 Inthe Audio Properties dialog box adjust the Recording Volume Preferred device and Preferred quality 4 Click OK Your new settings take effect the next time you record Enhancing Productivity 1 35 Exploring audio features Using external speakers or headphones Z Q Your computer is equipped with a full stereo sound system with internal speakers Instead of using the internal speakers you can connect headphones or a pair of external stereo speakers TECHNICAL NOTE Use amplified speakers that require an external power s
2. 1 Click Start then click Control Panel 2 Click Performance and Maintenance 3 Click System 4 The General tab view automatically appears and shows total memory If the computer does not recognize the memory configuration turn off the computer remove the memory slot cover and make sure the memory module is seated properly as described in step 10 of Adding memory on page 46 5 Getting Started Turning on the computer Turning on the computer The computer is now ready for you to turn it on and begin using it Opening the display panel 1 Slide the display latch to the right 2 Lift the display panel CAUTION l0 avoid damaging the display panel do not force it beyond the point where it moves easily and never lift the computer by the display panel Small bright dots may appear on your TFT display when you turn on your computer Your display contains an extremely large number of thin film transistors TFT and is manufactured using high precision technology Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology Turning on the power To turn on the computer 1 Make sure any external devices such as the AC adapter if you plan to use AC power rather than battery power are properly connected and ready Check to ensure that all drives are empty Press and hold the power button in until the on off light on the system indi
3. NOTE If your notebook computer is connected to multiple wireless LAN devices the Auto Switch SSID feature is disabled To enable this feature only one wireless LAN device can be used Glossary G TECHNICAL NOTE Some features defined in this glossary L may not be available on your computer Acronyms These acronyms may appear in this user s guide AC alternating current BIOS basic input output system bps bits per second CD compact disc CD ROM compact disc read only memory CD RW compact disc rewrite memory CMOS complementary metal oxide semiconductor COMI communications port 1 serial port COM2 communications port 2 serial port CPU central processing unit 208 DC DMA DIMM DOS DPI DSTN DVD DVD ROM ECP EPROM FAT FCC FIR GB HDD HTML IEEE VO IRQ ISP LAN LCD LPT1 LSI MIDI PC PCI w 209 direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile or video disc digital versatile or video disc read only memory enhanced capabilities port erasable programmable read only memory file allocation table Federal Communications Commission fast infrared gigabyte hard disk drive Hypertext Markup Language Institute of Electrical and Electronics Engineers input output interrupt request Internet service provider kilobyte local area network liquid crystal display line printer
4. Saving your work Before you turn off the computer save your work on the hard disk drive or a diskette This is one of the most important rules of computing TECHNICAL NOTE Save your data even when you are using the Standby command in case the main battery discharges before you return to work Z Saving documents is quick and easy so it is a good idea to get in the habit of saving frequently Many programs offer a feature that saves documents at regular intervals Check your program s documentation to see if it has an automatic save feature Saving files 1 On the File menu of your Windows program click Save If you are working with a document that already has a file name this is all you need to do If you created a new document your program displays a Save As dialog box Learning the Basics I Saving your work Use this dialog box to specify where to store the document and to give it a file name File pane Document Hy Hlebvecet Soar ae epee Rich T Fomai ATF A sample Save As dialog box 2 Choose the drive and folder where you want your file to be stored 3 Type a file name then click Save HINT To make another copy of the file you are currently working with choose Save As from the File menu and give the new file a different name The Windows XP operating system supports file names of up to 255 characters the names can include spaces Some applications still require
5. If the battery has completely discharged it will not begin charging immediately Leave the AC adapter and power cable connected wait 20 minutes and see if the battery is charging If the battery light is glowing after 20 minutes let the computer continue charging the battery for at least another 20 minutes before you turn on the computer If the battery light does not glow after 20 minutes the battery may have reached the end of its useful life Try replacing it The battery appears not to power the computer for as long as it usually does If you frequently recharge a partially charged battery it may not charge fully Let the battery discharge completely then try charging it again Check the power options using the Power Management utility Have you added a device such as a PC Card or lf Something Goes Wrong 1 13 Resolving a hardware conflict memory module that takes its power from the battery Is your software using the hard disk more Is the display power set to turn off automatically Was the battery fully charged to begin with All these conditions affect how long the charge lasts Keyboard problems If when you type strange things happen or nothing happens the problem may be related to the keyboard itself The keyboard produces unexpected characters A keypad overlay may be on If the numeric keypad or cursor control light is on press Fn and F10 simultaneously to turn off the cursor control light or
6. 198 Using ConfigFree with your Toshiba Computer 1 QO Getting Started Quick Connect The Quick Connect utility is used to configure a wireless LAN connection ad hoc connection between a personal computer and a Toshiba Wireless Projector The Toshiba Wireless Projector utility must be installed in order to enable Quick Connect For more information see Quick Connect on page 205 Getting Started This section contains information about the ConfigFree main screen and how to start and configure ConfigFree ConfigFree Main Screen Wes 14 Stay on the task tray ConfigFree main screen Stay on the task tray Select this check box to display the ConfigFree icon in the taskbar Options Use to configure options in ConfigFree For more information see Configuring ConfigFree on page 200 200 Using ConfigFree with your Toshiba Computer Getting Started Create LOG Creates and displays a log file containing diagnostic information about devices connected to the network About Displays version information about ConfigFree Help Displays the online help file Starting ConfigFree To start ConfigFree do any of the following Microsoft Windows XP users Click the Start button and then point to All Programs Point to the TOSHIBA ConfigFree folder and then click ConfigFree Microsoft Windows 2000 users Click the Start button and then point to Progr
7. CAUTION Do notuse this equipment except in the countries regions in the following table Argentina Australia Austria Belgium Brazil Canada Chile Denmark Finland France Germany Greece Iceland Ireland Italy Japan Liechtenstein Luxembourg Mexico Netherlands New Zealand Norway Peru Portugal Singapore Spain Sweden Switzerland UK Uruguay USA Venezuela 16 Approved Countries Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries regions in the following table CAUTION Do notuse this equipment except in the countries regions in the following table Australia Austria Belgium Canada Denmark Finland France Germany Greece Hong Kong Iceland Ireland Italy Japan Liechtenstein Luxembourg Malaysia Netherlands New Zealand Norway Philippines Portugal Singapore Spain Sweden Switzerland Thailand UK USA Bluetooth wireless technology Interoperability Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum FHSS radio technology and is compliant to o Bluetooth Specification Ver 1 1 as defined and approved by The Bluetooth Special Interest Group Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special intere
8. TOSHIBA Satellite M30 M35 Series Users Guide If you need assistance Toshiba Global Support Centre Calling within the United States 800 457 7777 Calling from outside the United States 949 859 4273 For more information see If Something Goes Wrong on page 161 in this guide WARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling C6659 0304M2 03 04 2 Models Satellite M30 M35 Series ReWritable CD DVD Drives The computer system you purchased may include a ReWritable CD and or DVD drive s among the most advanced data storage technologies available As with any new technology you must read and follow all set up and usage instructions in the applicable user guides and or manuals enclosed If you fail to do so this product may not function properly and you may lose data or suffer other damage TOSHIBA AMERICA INFORMATION SYSTEMS TOSHIBA ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE YOU AGREE THAT TOSHIBA ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS PROFITS PROGRAMS DATA OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT EVEN IF ADVISED OF THE POSSIBILITY THEREOF Protection of Stored Data For your important d
9. AC adapter 43 AC power cable connectors 197 accessories carrying cases 89 memory 46 Add Printer Wizard 115 adding memory 46 adjusting recording quality 134 Alt keys 70 arm wrist strain 40 assign keys Fn esse 148 audio wav files 132 audio features 130 Auto Run 132 backing up files 68 battery changing 107 charge does not last 172 charging 46 charging before use 42 conserving power 109 disposal 109 not charging 172 power usage hot key 111 power usage mode 192 real time clock RTC 100 removing 108 unlocking 107 battery alarms 106 battery power displaying remaining 104 monitoring 103 button power 52 start 121 creating 132 223 224 e playing an audio 130 playing using Auto Run 132 CDs problem solving 178 channels DMA 168 IRQ 168 character keys 69 charging the battery 46 checking device properties 170 click 54 communications network connection 125 setting up 91 system resources 168 compact disc positioning 83 compact discs handling 84 inserting 82 problem solving 178 removing 84 computer customizing 151 non system disk or disk error message 164 not accessing disk drives 163 precautions 41 setting up 47 turning off 57 warning resume failure message 164 computer placement 39 computer setup 42 computer friendly environment 37 computing tips 67 connecting to a power source 43 connection set up 125 control buttons 54 critical applications 2 Ctrl keys 70 D desktop creat
10. Verifi care con 1 rivenditori la procedura da seguire L uso per installazione in esterni non e permessa Nederland License required for outdoor installations Check with reseller for pro cedure to follow Licentie verplicht voor gebruik met buitenantennes Neem contact op met verkoper voor juiste procedure USA Federal Communications Commission FCC This device complies with Part 15 of FCC Rules Operation of the devices in a Wireless LAN System is subject to the following two conditions This device may not cause harmful interference This device must accept any interference that may cause undesired operation TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA The correction of interference caused by such unauthorized modification substitution or attachment will be the responsibility of the user 11 Caution Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas The both of antenna types when installed are located at the upper edge of the LCD screen For both antennas the radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits Nevertheless th
11. baud rate parity data length and stop bits specified in the communications program It should be set up to transmit at 300 1200 2400 4800 9600 14400 28800 33600 bps bits per second or higher Refer to the program s documentation and the modem manual for information on how to change these settings The modem is on set up properly and still will not transmit or receive data Make sure the line has a dial tone Connect a telephone handset to the line to check this The other system may be busy or off line Try making a test transmission to someone else Develop good computing habits Make sure you are prepared Save your work frequently You can never predict when your computer will lock forcing you to close a program and lose unsaved changes Many software programs build in an automatic backup but you should not rely solely on this feature Save your work See Computing tips on page 67 for instructions 1 8 4 lf Something Goes Wrong Develop good computing habits On a regular basis back up the information stored on your hard disk Here are some ways you can do this Copy files to diskette following the steps in Saving your work on page 76 Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape Some people use a combination of these methods backing up all files to tape weekly and copying critical files to diskette on a daily basi
12. digital music players cellular phones PDAs digital cameras digital video camcorders etc Inserting an SD card To insert an SD card 1 Turn the card so that the contacts metal areas are face down 2 Push the card into the slot until it locks in place Enhancing Productivity 1 4 Using SD cards Inserting an SD card CCAUTION Do not touch the SD connector metal area You could expose the storage area to static electricity which can destroy data Do not remove an SD card while data is being written or read Even when the message copying in the windows disappears writing to the card might still be in progress and your data could be destroyed Wait for the SD Media indicator light to go out Removing an SD card To remove an SD card 1 Right click the Safely Remove Hardware icon on the System tray After the card is stopped it is safe to remove Press the card inward to release it The card pops out slightly Grasp the card and pull it straight out 1 42 Enhancing Productivity Using the i LINK port Using the i LINK port The 1 LINK port on the rear of the computer provides an extremely fast data transfer rate up to 400 mega bits per second Mbps You can connect up to 63 external devices to the 1 LINK port In addition to high speed the 1 LINK port also supports isochronous data the delivery of data at a guaranteed rate This makes it ideal for de
13. make sure all disk activity has ended the drive indicator light stops glowing and all external peripheral cables are disconnected CAUTION Do not pick up the computer by its display panel or by the back where the ports are located Although your notebook computer is built to withstand reasonable shock and vibration transport it in a carrying case for long trips You can purchase a carrying case from your Toshiba dealer through the accessories information packaged with your system or visit toshiba com 90 Learning the Basics Backing up your work Backing up your work Your computer comes with Recovery media that enable you to reinstall software that was preinstalled This media can be used to install or reinstall particular Toshiba applications utilities and drivers Back up all the files you create in case something happens to your computer If you have a network partition you can hold copies of your files there Alternatively you can back up your files to diskette one at a time as you are working on them To back up several files at one time use the Microsoft Windows backup program preinstalled on the computer s hard disk Complete information on the backup program is in the online Help and your Windows documentation a HINT Backing up all the files on your hard disk takes a considerable amount of time and many diskettes You may prefer to use a high capacity backup system such as an extern
14. printer name 8 Enter a name for your printer HINT If you are using more than one printer make sure the name is descriptive enough to help you tell the difference 9 Ifyou want this printer to be The default printer click Yes Available when specifically requested click No 10 Click Next 11 Click Finish The Windows XP operating system prints a test page 12 To complete the setup click OK You are now ready to print Depending on your program you may see various messages indicating the status of your print job 1 1 8 Expansion Options Using the Wi Fi Wireless LAN Mini PCI module Z Using the Wi Fi Wireless LAN Mini PCI module Your computer may have an integrated Wi Fi Wireless LAN Mini PCI module It is recommended that you do not remove the module from your computer For assistance contact a Toshiba Wireless Authorized Service Partner TECHNICAL NOTE Some printers require a specific installation process In this case the Windows XP operating system Add Printer Wizard will display an error message If this happens refer to your printer installation guide for further instructions For systems equipped with Wi Fi flip the wireless on off switch to the On position Chapter 5 Enhancing Productivity In this chapter you will explore some of the special features of your Satellite Series notebook computer Exploring the desktop The desktop is the launching pad for e
15. read the user s guide carefully and keep it for your future reference In case of any trouble with this model please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure Use of controls or adjustments or performance of procedures other than those sis RLE specified in the owners manual may result in hazardous radiation exposure Copyright This guide is copyrighted by Toshiba America Information Systems Inc with all rights reserved Under the copyright laws this guide cannot be reproduced in any form without the prior written permission of Toshiba No patent liability is assumed however with respect to the use of the information contained herein 2003 by Toshiba America Information Systems Inc All rights reserved Export Administration Regulation This document contains technical data that may be controlled under the U S Export Administration Regulations and may be subject to the approval of the U S Department of Commerce prior to export Any export directly or indirectly in contravention of the U S Export Administration Regulations is prohibited 23 Notice The information contained in this manual including but not limited to any product specifications is subject to change without notice TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS INC TOSHIBA PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFO
16. recycle old batteries or how to dispose of them properly If you cannot find the information you need elsewhere call Toshiba at 1 800 457 7777 Conserving power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors such as How the computer is configured How much you use the hard disk DVD ROM or multi function drive and diskette drives or other optional devices Where you are working since operating time decreases at low temperatures 1 1 Mobile Computing Conserving power There are various ways in which you can conserve power and extend the operating time of your battery Enable Standby or Hibernation which saves power when you turn off the computer and turn it back on again Use Toshiba s power saving options These power saving options control the way in which the computer is configured By using them you can greatly increase the length of time you can use the computer before you need to recharge the battery Toshiba has combined these options into preset power profiles Using one of these profiles lets you choose between maximum power savings and peak system performance You may also set individual power saving options to suit your own needs The following sections describe how to choose a power profile and discuss each power saving option Power profiles in Windows XP In Windows XP you can choose from predefined power profile
17. you can assign an Fn key combination to Open a Windows XP operating system program Open a file in its associated program Display a customized folder of programs and or files from which to choose Fn esse also has several keys known as hot keys that perform preassigned operations For more information see Hot Keys on page 191 You can assign any key that is not associated with a hot key or a keyboard overlay Starting Fn esse 1 Click Start point to All Programs Toshiba Utilities then click Fn esse The Fn esse keyboard appears amp Fn esse Assignments Options Help 1 2 3 4 5 6 Sample Fn esse window womans 147 The keys are color coded as follows Available keys are dark gray with white letters Assigned keys and keys associated with a popup list are shown on the Fn esse keyboard in the selected color Unavailable keys are light gray There are two ways to assign a key to open a program or document Using drag and drop Using the keyboard or pointing device The method most often used is drag and drop Using drag and drop to assign a key To assign a key to a program or document 1 Start both Fn esse and Windows Explorer or the program supporting drag and drop 2 Resize the Explorer window so that you can see both the Fn esse keyboard and Explorer at the same time 3 In the Explorer window highlight the program or document file you wish to assign to
18. 03GZDA0017 The following restrictions apply Do not disassemble or modify the device lt Do not install the embedded wireless module into other device Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try and correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver 14 Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card or the substit
19. 24 Computer disposal information This product contains mercury Disposal of this material may be regulated due to environmental considerations For disposal reuse or recycling information please contact your local government or the Electronic Industries Alliance at www elae org Contents Introduction ccstcscectcxtceansovccsumccssentanzonestesenntinesdsvateaccsexs 33 This guide noses 34 Safety ICONS cccscecsinonntecsoarocaesvastscerectecesuadenecacasoccun 34 Other icons used iesise 35 Other documentation 35 Service OPTIONS oo ccc ecceseesecsseesesseeeseseeeesseees 36 Chapter 1 Getting Started oo eee 3 selecting a place tO Work o ceicecccceeeeeeeeteeeeenees 37 Creating a computer friendly environment 37 Keeping yourself comfortable ee 38 Other Precautions sasssa 41 Setting up your computer scese 42 Adding MeEMOTY oun cece cccccceseesseeeeesssseeeeessseeeeess 46 Installing a memory module cece 47 Removing a memory module ccc 50 Turning on the computer osssccccscccscrreen 52 Opening the display panel ccce 52 Turning on the pOWer ou eee eceesceesseeeeeeeeees 52 Using the TouchPad ooo ice seesessseeseeseeeen D3 20 Contents scrolling with the TouchPad ooo 54 Control buttons ceee 54 Disabling or enabling the TouchPad D9 Setting up your software cssc 56 Registering your computer with Toshiba wu 57 Setting up other devices accsc
20. BAD RTC BATTERY BAD CHECKSUM CMOS CHECK SYSTEM To recharge the RTC battery connect the computer and leave it powered on for 24 hours Mobile Computing 1 03 Running the computer on battery power A CAUTION The computer s RIC battery is a Lithium lon Li lon battery and should be replaced only by your dealer or by a Toshiba service representative The battery can explode if not properly replaced used handled or disposed of Dispose of the battery as required by local ordinances or regulations The main battery light CI glows amber while the battery is being charged and glows blue when it is fully charged The battery may not start charging immediately under the following conditions The battery is extremely hot or cold To ensure that the battery charges to its full capacity wait until it reaches room temperature The battery is almost completely discharged Leave the power connected and the battery should begin charging after a few minutes Monitoring battery power The computer s main battery light gives you an indication of the main battery s current charge Blue indicates the AC adapter has fully charged the battery Amber indicates the AC adapter is charging the battery PS Off indicates that the battery is not being charged NOTE Battery life and charge time may vary depending upon power management settings applications and features used 1 0 Mobile Computing
21. Eject track track CD DVD control buttons on the front of the computer The mode button switches between the CD DVD and digital audio modes You can lock the mode to its current setting by pressing and holding the mode button for four seconds When the mode button is locked you cannot switch between the CD DVD and digital audio modes To unlock the mode button press and hold it for four seconds The previous track button returns to the preceding track on the disc The next track button skips to the following track on the disc The play pause button starts playing the disc or makes it pause if currently playing The stop eject button stops a disc that is currently playing You can eject a disc by pressing the stop eject button twice Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on 02 Learning the Basics Using the DVD ROM or multi function drive CD DVD control and digital audio modes The following chart describes CD DVD control and digital audio modes Power is off and you press Play Pause While in CD DVD mode you press the mode button Operating system is running and you press Play Pause CD DVD Mode If a CD is in the drive the system enters CD player mode and operates as a stand alone CD player If a DVD is in the drive the operating system starts and the DVD player starts DVD ROM drive power turns off If a CD is in the drive
22. Exact error messages and when they occurred For technical support call the Toshiba Global Support Centre Within the United States at 800 457 7777 Outside the United States at 949 859 4273 lf Something Goes Wrong Other Toshiba Internet Web sites 18 Other Toshiba Internet Web sites toshiba com computers toshiba com www toshiba ca www toshiba Europe com www toshiba co jp index htm http servicio toshiba com Worldwide Toshiba corpo rate site Marketing and product information in the USA Canada Europe Japan Mexico and all of Latin America Toshiba s worldwide offices Australia Toshiba Australia Pty Limited 84 92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux Belgium B V Excelsiorlaan 40 B 1930 Zaventem Belgium Czech Republic CHG Toshiba s r o Hnevkovskeho 65 61700 Brno Finland Scribona TPC OY Sinimdentie 14 P O Box 83 02630 ESPOO Finland Austria Toshiba Europe GmbH Handelskai 388 1020 Wien Austria Canada Toshiba Canada Ltd 191 McNabb Street Markham Ontario L3R 8H2 Canada Denmark Scribona Danmark A S Naverland 27 DK2600 Glostrup Denmark France Toshiba Syst mes France S A 7 Rue Ampere 92804 Puteaux C dex France 1 88 lf Something Goes Wrong Toshiba s worldwide offices Germany Greece Toshiba Europe GmbH Ideal Electronics S A LeibnizstraBe 2 109 Syngrou Avenue D 9
23. MS DOS file names File names If you plan to share your files with a computer using a pre Windows 95 version of the Windows operating system the file name must be no more than eight characters long Typically the file name also has an extension consisting of a period and up to three additional characters 18 Learning the Basics Printing your work You may use all the letters and numbers on the keyboard plus these characters amp and MS DOS file names are not case sensitive and must not contain spaces Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format For example Microsoft Word saves files with a doc extension Any file name with an extension of doc is assumed to be a Microsoft Word file Creating your own extension is usually unwise since the program is unlikely to recognize a strange extension and may refuse to handle your file correctly Printing your work Ensure the operating system is set up for your printer as described in Using a printer on page 113 Ny HINT You only need to set up the printer the first time you ee connect it If you use more than one printer or are changing printers you will need to set up the Windows XP Professional operating system to run with the additional printer s To print a file 1 Ifyour printer is not on turn it
24. Mixer Utility default Enabled may cause feedback Revert to the default settings PC Card problems PC Cards PCMCIA compatible include many types of devices such as a removable hard disk additional memory or a pager Most PC Card problems occur during installation and setup of new cards If you re having trouble getting one or more of these devices to work together several sections in this chapter may apply Resource conflicts can cause problems when using PC Cards See Using PC Cards on page 86 for more information Card Information Structure When you insert a PC Card into a slot the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure CIS Sometimes the CIS contains enough information for you to use the card immediately Other cards must be set up before you can use them Use the Windows XP PC Card PCMCIA Wizard to set up the card Refer to your Microsoft documentation for more information or refer to the documentation that came with the PC Card 1 80 lf Something Goes Wrong Resolving a hardware conflict Some card manufacturers use special software called enablers to support their cards Enablers result in nonstandard configurations that can cause problems when installing the PC Card If your system does not have built in drivers for your PC Card and the card did not come with an operating system driver it may not work under
25. Please make sure before using this equipment that no Other Radio Stations are used in the neighborhood 2 In case that RF interference occurs to Other Radio Stations from this equipment please change promptly the frequency for use place to use or stop emitting Radio 3 Please contact TOSHIBA Direct PC if you have a problem such as interference from this equipment to Other Radio Stations 2 Indication The indication shown below appears on this equipment a 2 3 4 1 2 4 This equipment uses a frequency of 2 4 GHz 2 DS This equipment uses DS SS modulation 3 The interference range of this equipment is less than 40m 4 This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz 13 It is possible to avoid the band of mobile object identification systems 3 TOSHIBA Direct PC Monday Friday 10 00 17 00 Toll Free Tel 0120 13 1100 Direct Dial 03 3457 5916 Fax 03 5444 9450 Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval and it belongs to the device class of radio equipment of low power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan The Name of the radio equipment MPC13A 20 R JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT Approval Number DO1 1128JP TELECOM ENGINEERING CENTER Approval Number O3NY A0018
26. RTC battery does not charge while the L computer is turned off even when AC power is attached Charging the battery To charge the main battery while it is in your computer plug the computer into a live electrical outlet The battery charges whether the computer is on or off Mobile Computing 1 0 Running the computer on battery power The main battery light CI glows amber while the battery is being charged and glows blue when it is fully charged The battery may not start charging immediately under the following conditions The battery is extremely hot or cold To ensure that the battery charges to its full capacity wait until it reaches room temperature The battery is almost completely discharged Leave the power connected and the battery should begin charging after a few minutes Maximizing battery life To maximize the life of your battery pack At least once a month disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges Before doing so follow the steps below 1 2 Turn off the computer s power Disconnect the AC adapter and turn on the computer s power If it does not turn on go to step 4 Operate the computer on battery power for five minutes If the battery pack has at least five minutes of operating time continue operating until the battery pack is fully discharged If the battery light LED flashes or ther
27. Structure 179 computer stops working 181 configuring 140 errors 181 hot swapping 86 hot swapping fails 181 inserting 138 modem default 123 not recognized 181 problem solving 179 180 removing 139 setting up 140 using 86 port COM 123 Ethernet LAN 125 RGB 58 video out 58 video out connecting to 60 posture 39 power alarms 106 computer will not start 163 options 111 problem solving 171 228 e turning on 52 universal power supply 197 power button 52 Power Management 151 power mode creating new 153 customizing 153 power source 43 power usage mode hot key 111 power usage mode hot key 192 power usage modes 110 powering down using Standby 96 precautions 41 45 other computer use 41 primary button 54 printer choosing a driver 115 connecting a parallel 114 local connecting 63 problem solving 182 setup 115 using 113 printing a file 78 problem solving AC power 172 accessing disk drives 163 battery charge does not last 172 battery not charging 172 can not insert diskette in drive 177 can t read a diskette 177 cannot access DVD ROM or multi function drive 178 changing display properties 175 checking device properties 170 compact discs not running correctly 178 computer hangs when PC Card inserted 181 computer will not power up 163 contacting Toshiba 33 185 186 corrupted damaged data files 177 Device Manager 169 disabling a device 169 170 disk drive is slow 176 display is blank 173 DVD ROM multi funct
28. Using a computer lock For your own peace of mind you may want to secure your computer to a heavy object such as your desk The easiest way to do this is to purchase an optional PORT Noteworthy Computer Lock Cable PORT Noteworthy Computer Lock Cable To secure the computer 1 Loop the cable through or around some part of a heavy object Make sure there is no way for a potential thief to slip the cable off the object Pass the locking end through the loop W 3 _ Insert the cable s locking end into the security lock slot on the computer then give the key a quarter turn and remove it The computer is now securely locked Locking the computer Learning the Basics 89 Caring for your computer Caring for your computer This section gives tips on cleaning and moving your computer For information about taking care of your computer s battery see Running the computer on battery power on page 100 Cleaning the computer CAUTION Keep liquids including cleaning fluid out of the computer s keyboard speaker and other openings Never spray cleaner directly onto the computer Never use harsh or caustic chemical products to clean the computer To keep your computer clean gently wipe the display panel and exterior case with a lightly dampened cloth Ask your Toshiba dealer for suggestions for appropriate cleaning products Moving the computer Before moving your computer even across the room
29. a key 4 Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn esse keyboard to which you want to assign it 5 Release the primary button Fn esse displays the Add Edit Command dialog box with the Description Command Line and Working Directory fields automatically completed 6 Click OK to close the Add Edit Command dialog box with your key assignment in place 1 48 Toshiba Utilities Fn esse The program or document is now associated with the key you just selected To open the program or document press Fn plus the appropriate key from within any Windows program Using the keyboard or pointing device to assign keys To assign a key to open a program or document start Fn esse and either Using the keyboard press and hold the Fn key then press the desired assignment key Using the pointing device move the cursor over the desired key in the Fn esse window and press the secondary button The Assignment Type dialog box appears Assignment Type td Direct Assign an Fnkey to launch an application directly Popup Assign an Fake to popup a list that is used to launch an application Clear Clear the current Foker assignment r Help W Confirm all changes to key assignments Sample Fn esse assignment type dialog box Making a direct key assignment 1 Select Direct to display the Add Edit Command dialog box 2 Enter the Descripti
30. a place to work 37 SelectServ 36 service options 36 setting up adding memory 46 computer 47 setting up a connection 125 setting up your computer 42 shutting down more quickly 92 sound problem solving 178 sound recording 134 sounds recording 132 speakers external connecting 66 using external 135 Stand By mode hot key 193 Standby 96 Standby mode going into more quickly 97 starting again from 98 start button 121 starting a program 73 Run dialog box 75 Windows Explorer 74 Windows Start menu 73 starting up the computer from Shut down 94 from Standby 98 Startup menu problem solving 165 stored data protection 2 supervisor password deleting 160 supervisor password set up 159 System Setup 163 system tray 122 230 T taskbar 121 telephone line connecting to modem 142 television 58 adjusting display 62 connecting 59 Toshiba Internet Web sites 187 Toshiba Accessories information 35 Toshiba Console 150 Toshiba Hardware Setup 154 Toshiba online resources 98 Toshiba utilities 145 trademarks 23 transferring files 122 transferring information between computers 122 turning off the computer 57 turning on the computer 46 turning on the power 52 U Universal Resource Locator URL 122 USB mouse connecting 113 user password disabling 158 user passwords setting 156 using a file extension 78 utilities Power Management 151 Toshiba Power Saver Utility 156 V video cables 59 video display device connect
31. address See Fixing a problem with Device Manager on page 169 for more information Since all PC Cards share the same socket each card is not required to have its own address Hot swapping removing one PC Card and inserting another without turning the computer off fails Follow this procedure before you remove a PC Card 1 Double click the PC Card icon on the taskbar 2 Click Safely remove xxxx where xxxx is the identifier for your PC Card The operating system displays a message that you may safely remove the card 3 Remove the card from the slot The system does not recognize your PC Card Refer to the PC Card documentation Removing a malfunctioning card and reinstalling it can correct many problems A PC Card error occurs Reinsert the card to make sure it is properly connected 1 82 lf Something Goes Wrong Resolving a hardware conflict If the card is attached to an external device check that the connection is secure Refer to the card s documentation which should contain a troubleshooting section Printer problems This section lists some of the most common printer problems The printer will not print Check that the printer 1s connected to a working power outlet turned on and ready online Check that the printer has plenty of paper Some printers will not start printing when there are just two or three sheets of paper left in the tray Make sure the printer cable is firmly attached
32. before you can use it To use external power or to charge the battery you must attach the AC adapter See Connecting to a power source on page 43 To register your computer online or to sign up for an Internet account you must be connected to the Internet using a modem or LAN connection Before adding any of these devices to the computer be sure to complete Setting up your software on page 56 After setting up your computer you may want to Add more memory Connect a mouse Connect a full size keyboard Connect an external monitor gt Getting Started 43 Setting up your computer Connect a local printer Install PC Cards Connecting to a power source Your computer requires power to operate Use the power cable and AC adapter to connect the computer to a live electrical outlet or to charge the computer s battery Power cable Sample power cable and AC adapter WARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling A CAUTION Hold the power cable by its plug when you connect disconnect it Do NOT pull the cable itself Doing so may damage the power cable and result in a short circuit or electric shock 4 4 Getting Started Setting up your computer A CAUTION Use only the AC adapter supplied with your computer
33. chapter Problems that are easy to fix Your program stops responding If you are working with a program that suddenly freezes all operations chances are the program has stopped responding You can exit the failed program without shutting down the operating system or closing other programs To close a program that has stopped responding 1 Press Ctrl Alt and Del simultaneously once The Windows Task Manager window appears 161 162 If Something Goes Wrong Problems that are easy to fix Click the Applications tab If a program has stopped responding the words not responding appear beside its name in the list Select the program you want to close then click End Task Closing the failed program should allow you to continue working If it does not continue with step 3 Close the remaining programs one by one by selecting the program name then End Task Click Start Turn off computer The Turn off computer window appears Click Turn off The computer turns off Your program performs an illegal operation If you receive the message Your program has performed an illegal operation you should record the details of the message and consult the software manufacturer To record the details 1 Click the Details button and select the text the operating system displays The Details button displays information that the software manufacturer needs to help you solve your problem Press Ctrl
34. computer with Toshiba at a time later than when you first start your computer you may also click on the desktop icon to do so electronically Setting up other devices You may want to take this time to set up your printer For more information see Setting up your printer on page 115 Turning off the computer It is a good idea to turn off your computer when you are not using it for a while If you are using the computer for the first time leave the computer plugged into a power source even though the computer is off to fully charge the main battery With the computer off it may take up to three hours to recharge the main battery When you power down the computer you have three options to choose from Turn Off or Shut down Hibernate and Standby Each option has its advantages Use the Turn Off command if you are using the Windows XP Home version operating system or the Windows XP Professional operating system when not connected to a domain server Use the Shut down command if you are using the Windows XP Professional operating system and are connected to a domain server If you have work in progress and are not connected to a network use the Windows Standby or Hibernate 5 8 Getting Started Using external display devices commands to save your system settings to memory so that when you turn on the computer again you will automatically return to where you left off To leave the computer off fo
35. diskette incorrectly Hold the diskette with the hub side facing down and insert it so that the metal head window cover goes into the drive first The metal cover or a loose label may be obstructing the path into the drive Carefully inspect the diskette If the metal cover is loose replace the diskette If the label is loose replace the label and try inserting the diskette again The computer displays the Non system disk or disk error message If you are starting the computer from a diskette the diskette in the drive does not have the files necessary to start the computer Replace it with a bootable diskette The drive cannot read a diskette Try another diskette If you can access the second diskette the first diskette not the drive is probably causing the problem Run Error checking on the faulty diskette for instructions see Disk drive problems on page 175 1 18 lf Something Goes Wrong Resolving a hardware conflict DVD ROM or multi function drive problems You cannot access a disc in the drive Make sure the drive tray has closed properly Press gently until it clicks into place Open the drive tray and remove the disc Make sure the drive tray is clean Any dirt or foreign object can interfere with the laser beam Examine the disc to see whether it is dirty If necessary wipe it with a clean damp cloth dipped in water or a neutral cleaner Replace the disc in the tray Make sure it is lying flat
36. display adjusting 62 external monitor not working 175 external speakers 66 F FAT File Allocation Table 176 FCC Notice Declaration of Conformity Information 3 FCC requirements 4 file extensions 78 file names 77 file backing up 68 files backing up 90 printing 78 restoring 90 saving 76 FN keys 70 Fn esse starting 146 using to assign keys 148 Fn esse program 146 assigning a key 146 using drag and drop 147 function keys 70 H hardware conflicts 167 resolving 168 headphones connecting 66 using 135 Help Windows XP 166 Hibernation enabling 156 Hibernation mode 94 configuring 95 starting again from 96 Hibernation mode hot key 194 hot key display modes 195 Hibernation mode 194 keyboard 196 206 keyboard overlays 196 power usage mode 192 Stand By mode 193 volume mute 191 hot key power usage mode 111 hot key utility 153 154 hot keys 191 hot swapping PC Cards 86 icon 120 definition 35 desktop 120 hint 35 internet explorer 121 moving to desktop 120 recycle bin 120 safety 34 technical note 35 Industry Canada requirement 4 installation memory module 47 installing memory modules 46 mouse 63 instant passwords using 157 Internal External mode 175 Internet bookmarked site not found 166 slow connection 166 URL address not found 166 internet connecting to 128 features 129 surfing 129 uploading and downloading files 130 internet explorer icon 121 internet service prov
37. display panel 5 Click Apply 6 Click OK The computer is now set to automatically go into Hibernation when your option settings occur NOTE For more information about the Power Saver utility see Power Management on page 151 Once the computer is configured put the computer into Hibernation mode by either pressing the power button or closing the display panel depending on the hibernation options taken Learning the Basics Powering down the computer Starting again from Hibernation mode To start up the computer from Hibernation mode press the power button until the on off light turns blue The computer returns to the screen you were using If you put the computer in Hibernation mode by closing the display panel you can start it again by opening the display panel Using Standby The Standby command puts the computer into a power saving mode Standby holds the current mode of the computer in memory so that when you restart the computer you can continue working from where you left off Factors to consider when choosing Standby While in Standby mode the computer uses some battery power A fully charged main battery will last up to eight hours in Standby mode Restarting from Standby uses less time and battery power than restarting from Turn off computer or Hibernation gt When starting up again the computer returns to the mode in which you left it including all open programs an
38. ext rieur est autoris sur le canal 10 2457 MHz et 11 2462 MHz Dans le cas d une utilisation priv e a l ext rieur d un b timent audessus d un espace public aucun enregistrement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure 300m un enregistrement aupr s de I IBPT est requise Pour une utilisation publique a I ext rieur de b timents une licence de T IBPT est requise Pour les enregistrements et licences veuillez contacter l IBPT Deutschland License required for outdoor installations Check with reseller for pro cedure to follow Anmeldung im Outdoor Bereich notwendig aber nicht genehmigung spflichtig Bitte mit Handler die Vorgehensweise abstimmen Restricted frequency band only channels 10 and 11 2457 MHz and 2462 MHz respectively may be used in France License required for every installation indoor and outdoor installations Please contact ART for procedure to follow Bande de fr quence restreinte seuls les canaux 10 11 2457 MHz et 2462 MHz respectivement doivent tre utilis s en France Toute utili sation qu elle soit int rieure ou ext rieure est soumise a autorisation Vous pouvez contacter I Autorit de R gulation des T l communia tions http www art telecom fr pour la proc dure a suivre License required for indoor use Use with outdoor installations not allowed E necessaria la concessione ministeriale anche per luso interno
39. for troubleshooting information AWARNING Damaged power cables can cause fire or electric shock Never modify forcibly bend place heavy objects on top of or apply heat to the power cable If the power cable becomes damaged or the plug overheats discontinue use There is a risk of electric shock Never remove the power plug from the outlet with wet hands Doing so may cause an electric shock 46 Getting Started Adding memory Charging the battery Your computer came with its battery already installed Before using the battery to power the computer you must charge it To charge the battery leave the computer plugged in to an AC power source for at least three hours with the computer turned off After that the battery will be completely charged and ready to power the computer CAUTION Once the battery is charged for the first time avoid leaving the computer plugged in and turned off for more than a few hours at a time Continuing to charge a fully charged battery can damage the battery Adding memory qag HINT To purchase additional memory modules see the Bes accessories information packaged with your system or visit Ne toshiba com Your Satellite M30 M35 Series computer comes with enough i memory to run most of today s popular applications You may want to increase the computer s memory if you use complex software or process large amounts of data For more information on memory
40. information reported by the modem If Windows XP cannot communicate with the modem it displays an error message Consult the troubleshooting sections of your modem and Windows XP documentation Click OK to close the properties dialog box for that specific modem Click OK to close the Modem Properties dialog box Close the Control Panel Connecting the modem to a telephone line Before you can use the modem you must connect it to a standard voice grade telephone line For more information see Connecting to a phone line on page 143 Enhancing Productivity 1 a5 Exchanging data with another computer Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports Accessing a network To access a network At the office connect an Ethernet cable to the RJ45 jack on your computer For specific information about connecting to the network consult your network administrator While you are at home or traveling you need a dial up connection Ask your network administrator for the telephone number of the network Setting up the connection To set up an office connection consult your network administrator for network settings and additional considerations To set up a dial up connection use the New Connection Wizard 1 Click Start and point to All Programs 2 Point to Accessories then to Communications
41. of the operating system Service options Toshiba offers a full line of service options built around its SelectServ limited warranty programs For more information visit Toshiba s Web site at toshiba com If you have a problem or need to contact Toshiba see If Something Goes Wrong on page 161 Chapter 1 Getting Started This chapter provides tips for working comfortably describes how to connect components and explains what to do the first time you use your computer Selecting a place to work Your computer is designed to be used in a variety of locations and situations This section provides guidelines for setting up your computing environment Creating a computer friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you need to use such as a printer Leave enough space around the computer and other equipment to give adequate ventilation otherwise they may overheat To keep your computer in prime operating condition protect your work area from Dust moisture and direct sunlight o Liquids and corrosive chemicals 3 3 8 Getting Started Selecting a place to work CAUTION lf you spill liquid into the computer turn it off unplug it from the AC power source and let it dry out completely before turning it on again If the computer does not operate properly after you turn it back on contact a Toshiba service repre
42. options check the accessories information that came with your computer or visit toshiba com Getting Started 4f Adding memory Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer You will need a standard Phillips no 1 screwdriver for this procedure CAUTION l0 avoid damaging the computer s screws use a standard Phillips no 1 screwdriver that is in good condition CAUTION Installing a memory module with the computer s power on may damage the computer the module or both The computer has two memory expansion slots Slot A and Slot B You can install one or two memory modules If the computer is on begin at step 1 otherwise skip to step 3 1 If the computer is on click Start Turn off computer The Turn off computer window appears 2 Click Turn Off The operating system turns off the computer 3 Unplug and remove any cables connected to the computer Remove the battery Close the display panel and turn the computer upside down to locate the expansion memory slot cover to the memory slot 4 8 Getting Started Adding memory o 000 000 000 i a i y COP O le a 5 Memory module cover E Z o T 0 0 Locating the memory slot cover 6 Using a standard Phillips no 1 s
43. or an equivalent adapter that is compatible Use of any incompatible adapter could damage your computer Toshiba assumes no liability for any damage caused by use of an incompatible adapter When you connect the AC adapter to the computer always follow the steps in the exact order as described in the User s Manual Connecting the power cable to a live electrical outlet should be the last step otherwise the adapter DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched As a general safety precaution avoid touching any metal parts To connect AC power to the computer 1 Connect the power cable to the AC adapter Connecting the power cable to the AC adapter 2 Plug the AC adapter into the DC IN on the back of the computer Getting Started A5 Setting up your computer Connecting the AC adapter to the computer 3 Connect the power cable to a live electrical outlet If the electrical outlet is live the system indicator panel s AC power light 82 glows blue If the main battery is present the battery light lt 3 glows KR Amber while the battery is charging Blue when the battery is fully charged If the battery light flashes amber during charging either the battery pack is malfunctioning or it is not receiving input from the AC power supply Disconnect the AC cable and remove the battery pack See If Something Goes Wrong on page 161
44. press Fn and F11 simultaneously to turn off the numeric keypad light If the problem occurs when both the keypad overlays are off make sure the software you are using is not remapping the keyboard Refer to the software s documentation and check that the program does not assign different meanings to any of the keys You have connected an external keyboard and the operating system displays one or more keyboard error messages If you have a second keyboard try it If it works the first keyboard may be defective or incompatible with your computer Display problems Here are some typical display problems and their solutions The display is blank Display Auto Off may have gone into effect Press any key to activate the screen You may have activated the instant password feature by pressing Fn and F1 simultaneously If you have registered a 1 T 4 lf Something Goes Wrong Resolving a hardware conflict password press the Enter key type the password and press Enter If no password is registered press Enter The screen reactivates and allows you to continue working If you are using the built in screen make sure the display priority is not set for an external monitor To do this hold the Fn key and press F5 twice A window with display choices pops up Hold the Fn key and press F5 twice again to advance through the display options If you are using an external monitor Check that the monitor is turned on Check
45. the Media Player starts and the Digital Audio Mode The operating sys tem starts the Media Player starts and the digital audio file begins to play Media Player starts and the digital audio file begins to play digital audio file begins to play If a DVD is in the drive the DVD begins to play Inserting compact discs To insert a compact disc into the drive 1 Make sure the computer is turned on 2 Make sure the in use indicator light is off 3 Press the drive s eject button Learning the Basics 83 Using the DVD ROM or multi function drive The disc tray slides partially out of the drive about 1 inch HINT The drive will not open if the computer s power Is off The drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust If the disc is dusty clean it as described in Caring for CDs or DVDs Discs on page 85 6 Place the disc carefully in the disc tray label side up Positioning the disc in the drive 8 4 Learning the Basics Using the DVD ROM or multi function drive 7 Gently press the disc onto the center spindle until you feel it click into place CAUTION Handle DVDs and CDs carefully making contact only with the center hole and edge Do not touch the surface of the disc Do not stack discs If you incorrectly handle the discs you could lose data 8 Make sure the disc is completely on the spindle and is lying flat on
46. the SCSI devices connected to it are operating Before removing a PC Card stop it by clicking the Safely Remove Hardware icon on the System tray After the PC Card is stopped it is safe to remove Learning the Basics 8 Using SD Secure Digital cards Using SD Secure Digital cards If you do not already have a SD card inserted in the computer you may do so following the procedures outlined in Inserting an SD card on page 140 Important Do not use the Copy Disk function for SD cards In order to copy data from one SD card to another use the following procedure 1 Format the target SD card in the same format as the source SD card 2 Insert the source SD card 3 Create a temporary folder on the hard disk drive 4 Copy the contents of the source SD card into the temporary folder you created in step 3 5 Remove the source SD card 6 Insert the target SD card created in step 1 7 Copy the file contents from the temporary folder to the target SD card 8 Eject the target SD card NOTE MMC cards multimedia cards do not work in this slot Using your computer at the office By connecting an external monitor external full size keyboard and a mouse you can work with your notebook as if it were a standard office computer An external monitor or projector connects to the RGB monitor port Any USB device can connect to the USB ports 88 Learning the Basics Using a computer lock
47. the TouchPad active at the same time Z Connecting a USB mouse To connect a USB mouse connect the mouse cable to the USB port on the computer Once connected the mouse is ready to use Using a printer Before you can connect a printer you must determine whether it requires a parallel infrared or a USB interface Check the printer s documentation If you can configure the printer as either a serial or a parallel device set it up for parallel operation 1 1 4 Expansion Options Using a printer You also need a suitable printer cable which may have been provided with your printer If not your company may keep a stock of cables Otherwise you can purchase one from a computer or electronics store TECHNICAL NOTE If your printer is ECP or IEEE compliant L make sure your printer cable is an IEEE 1284 cable Connecting a parallel printer Parallel printers are the most common type of printer in use today These instructions assume you have a parallel printer 1 Ifyou have been using the computer turn it off 2 Ifthe computer is connected to an AC power source disconnect the AC adapter CAUTION Never connect the printer cable while the computer is on Doing so may damage the printer the computer or both E 3 Connect the printer cable to the printer and to the 3 computer s parallel port Use the printer cable illustration as a connection guide To the computer To the printer
48. the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected gt Consult the dealer or an experienced radio T V technician for help NOTE Only Peripherals complying with the FCC Class B limits may be attached to this equipment Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception Shielded cables must be used between the external devices and the computer s parallel port monitor port USB port PS 2 port i LINK port and microphone jack Changes or modifications m
49. to open the TOSHIBA Console The TOSHIBA Console window appears On the left side select Security Select the User Password icon Click Set Type your password in the Input box Retype your password in the Input again box Click Set Click OK FAN A a A U Disabling a user password To cancel the power on password function 1 Click Start the click All Programs 2 Point to TOSHIBA Console then click the resulting TOSHIBA Console selection You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console The TOSHIBA Console window appears On the left side select Security Select the User Password icon Select Verify by Password Type the correct password Click Delete Click OK GO N A an A U Toshiba Utilities 1 DO Using a supervisor password Using a supervisor password A supervisor password prevents other users from changing hardware configuration options Setting a supervisor password To register a password for the power on password functions 1 Click Start the click All Programs 2 Point to TOSHIBA Console then click the resulting TOSHIBA Console selection You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console The TOSHIBA Console window appears 3 On the left side select Security 7 TOSHIBA Console X This tells how to begin using your computer It also provides detaile information on configurin
50. to accomplish a task A device such as a disk drive or a modem needs a channel to the computer s Central Processing Unit CPU It also needs a direct channel to the computer s memory to store information as it works These channels of communication are commonly referred to as system resources Interrupt Request Channel The channel to the CPU is called an Interrupt Request IRQ because it interrupts what the processor is doing and requests some of the processor s time Direct Memory Access Similarly the data required by the device is stored in a specific place or address in memory called the Direct Memory Access DMA The DMA provides a dedicated channel for adapter cards to bypass the microprocessor and access memory directly If two or more devices use the same DMA the data required by one device overwrites the data required by the other causing a hardware conflict Resolving conflicts There are three things you can do to resolve hardware conflicts Disable the device For an older device remove it from the computer lf Something Goes Wrong 1 69 Resolving a hardware conflict Disable another system component and use its resources for the new device see Fixing a problem with Device Manager on page 169 Reconfigure the device so that its requirements do not conflict Refer to the device s documentation for instructions about changing settings on the device Fixing a problem with
51. to control the CD If the computer is off you may press the Mode button until the CD DVD mode LED comes on then press Play to play the CD You can use the CD DVD control buttons to control the CD Enhancing Productivity 1 31 Exploring audio features To access the Windows Media Player you can open it through the Start menu or activate it from the taskbar NOTE When using Windows Media Player your system may not be able to activate Standby or Hibernation modes To prevent this from occurring close Windows Media Player before you select standby or Hibernation mode notify Sample Windows Media Player screen The CD Player control panel works much like an ordinary compact disc player To play the CD or to pause click the Play pause button on the CD Player control panel To stop the CD click the Stop button WARNING Before using headphones to listen to an audio CD turn the volume dial down Playing the CD with the volume set too high could damage your ears 1 3 Enhancing Productivity Exploring audio features Playing CDs using Auto Run If you insert a CD into the DVD ROM multi function drive and the Auto Run feature does not automatically start your disk try launching the CD manually To do this follow these Steps 1 Open the Start menu and select My Computer 2 Click the DVD ROM multi function drive icon The disk drive will run the CD If your disk does not run using this metho
52. viewed by others on their computer screens Internet news groups 1 30 Enhancing Productivity Exploring audio features A news group is similar to a chat room but instead of using a dedicated site to converse about a specialized subject with others in real time it uses a Web site as a clearinghouse where all the messages are placed like a gigantic bulletin board gt Online shopping Many Web sites offer products and services for sale Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading transferring data from your computer to a site on the Web or downloading transferring data from a site on the Web to your computer There are several ways to upload or download data It can be as simple as attaching a file or document to an email or you can use the File Transfer Protocol FTP features of your Web browser to transfer large amounts of data Exploring audio features You can use your computer to record sounds using an external microphone or the computer s built in microphone which is located to the left of the CTRL key on the keyboard You can play wav sound files or audio CDs using the built in speakers headphones or external speakers Playing an audio CD Insert an audio CD and close the disc tray If the computer is turned on Windows Media Player opens and the CD begins to play You can use the Windows Media Player program
53. 3055 Regensburg 176 71 Kalithea Germany Athens Greece Hungary Ireland Technotrade Kft Toshiba Information Systems Szerencs utca 202 U K Ltd 1147 Budapest Toshiba Court Hungary Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom Italy Japan Progetto Elettronica 92 s r l Toshiba Corporation PCO IO Viale Certosa 138 1 1 Shibaura 1 Chome 20156 Milano Minato Ku Tokyo 105 8001 Italy Japan Latin America and Caribbean Luxembourg Toshiba America Information Systems Toshiba Information Systems Benelux 9740 Irvine Blvd B V Irvine California 92618 Rivium Boulevard 41 USA 2909 LK Capelle a d IJssel The Netherlands 800 457 7777 within the US 949 859 4273 outside of the US this call may incur long distance charges Mexico Morocco Toshiba de M xico S A de C V C B L Sierra Candela No 111 6to Piso 22 Rue de B thune Col Lomas de Chapultepec Casablanca CP 11000 Mexico DF Morocco 5249 6500 The Netherlands Toshiba Information Systems Benelux B V Rivium Boulevard 41 2909 LK Capelle a d Issel The Netherlands Papua New Guinea Fujitsu PNG Pty Ltd P O Box 4952 Boroko NCD Papua New Guinea Portugal Quinta Grande Assist ncia T cnica Informatica Lda Av Moinhos no 15A Ur Quinta Grande 2720 Alfragide Portugal Slovakia HTC as Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems Espa a S A Parque Empresarial San Fernando Edif
54. A round flat piece of metal designed to be read from and written to by optical laser technology and used in the production of optical discs such as CDs and DVDs Compare disk disk A round flat piece of material that can be magnetically influenced to hold information in digital form and used in the production of magnetic disks such as diskettes and hard disks Compare disc See also diskette hard disk disk drive The device that reads and writes information and programs on a diskette or hard disk It rotates the disk at high speed past one or more read write heads diskette A thin flexible disk in a protective jacket that stores magnetically encoded data Diskettes can be removed from the computer and come in two sizes 5 25 inch and 3 5 inch Your computer uses 3 5 inch diskettes See also double density diskette high density diskette document Any file created with an application and if saved to disk given a name by which it can be retrieved See also file double click To press the AccuPoint control button or mouse button rapidly twice without moving the AccuPoint or mouse In the Windows operating system this refers to the primary AccuPoint control button or left mouse button unless otherwise stated double density diskette A 3 5 inch diskette that can hold up to 720 KB of information half the capacity of a high density diskette See also diskette high density diskette download 1 In co
55. Auto Switch SSID on page 207 A message displays each time the Auto Switch feature is applied You then have the option of disabling the Auto Switch option for future use You can access the Auto Switch feature in any of the following ways From the taskbar right click the Config Free icon and then click Auto Switch Using ConfigFree with your Toshiba Computer 20 Using Auto Switch From the Profile Settings screen you can click the Auto Switch button Auto Switch Cable Disconnect If a wired network cable is disconnected from the network the Auto Switch Cable Disconnect option will automatically switch to another network device Enable Wireless when cable disconnect occurs If your notebook computer is connected to multiple wired LAN devices and the physical connection to all of these devices is disconnected ConfigFree switches to a wireless LAN device However if the cable connection to only one wired LAN device is disconnected ConfigFree will not switch to a wireless device Auto Switch SSID The Auto Switch SSID option automatically switches to a different profile if your notebook computer is connected to a wireless LAN network and a network failure occurs ConfigFree detects the Service Set Identifier SSID of the wireless network that you are connected to If the SSID matches the Wireless Network SSID specified in Auto Switch the ConfigFree switches to the corresponding profile
56. CI Card MAC Addess 00 00 39 86 b0 95 Driver Provider Microsoft _ Driver Versions 541 220 p LISME ICC Fast Infrared Port Drive Dae 7 4 2001 I Sta on the task tray Viewing the device settings Network Connections Displays the Network Connection window which contains detailed information about the network connection Enable Disable You can easily enable or disable any of the listed devices simply by selecting the desired device and then clicking the Enable Disable button Each time a device is enabled or disabled the status of the device will change Enable Wireless when cable disconnect occurs Select this check box to enable the Auto Switch feature For more information see Using Auto Switch on page 206 20 4 Using ConfigFree with your Toshiba Computer ConfigFree Utilities Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree You can also add modify and delete profiles switch the profile being used and view specific details about each profile Created Date Captured items 12 10 2002 1 27 07 PM U4 Toshiba Office Internet Settings Comment Devices Y TCPAP Settings IF Sta on the task tray Viewing registered profiles Details The Details button displays the ConfigFree Details screen This screen displays detailed information for each profile and can be used to view the various settings for each reg
57. Device Manager Device Manager provides a way to check and change the configuration of a device CAUTION Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them Disabling a device 1 Open the Start menu click Control Panel then Performance and Maintenance Click the Administrative Tools icon Click the Computer Management and then Device Manager Select the specific device from the device category In the toolbar look to the far right for an icon of a monitor with a strike mark through a circle on the front This is the disable feature Click the icon You are given the option of disabling the device Click yes or no whichever is appropriate 1 10 lf Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device Properties include the name of the manufacturer the type of device the drivers installed and the system resources assigned to the device To check a device s properties 1 Open the Start menu click Control Panel 2 Click Performance and Maintenance and then Administrative Tools Click the Computer Management icon Click the Device Manager button To view the device s installed double click the d
58. E GJIC IE i Da CECECECECA SAAS CCE re i AA TEL Enter Er ao a E E E ATT ATTA Numeric and cursor control overlay 2 Learning the Basics Using the keyboard Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys To turn the numeric overlay on press Fn and F11 simultaneously The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on You can still use the overlay keys to type alphabetic characters while the numeric overlay is on To do so For lowercase letters hold down Fn while you type the letters For uppercase letters hold down both Fn and Shift while you type the letters To use the cursor control keys when the numeric overlay is on Press and hold down Shift while you use the cursor control overlay keys To return to the numeric overlay release Shift To disable the numeric overlay hold down the Fn key and press F11 again The numeric mode light on the keyboard indicator panel goes out Using the overlay for cursor control The keys with the gray arrows and symbols on their left front are the cursor control overlay keys To turn the cursor control overlay on press Fn and F10 simultaneously The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on To type alphabe
59. Fe ee ARAR q Waa Pad Pa Ed yyy ry AA TETTETETT Toa e ETTI IITTI ITTIA AHA A Ee Keyboard Ha Character keys Typing with the character keys is very much like typing on a typewriter except that The space bar creates a space character instead of just passing over an area of the page The lowercase letter 1 el and the number are not interchangeable The uppercase letter O and the number 0 are not interchangeable Making your keyboard emulate a full size keyboard Although your computer s keyboard layout is compatible with a standard full size keyboard it has fewer keys A standard full size keyboard has two Enter Ctrl and Alt keys editing keys cursor positioning keys and a numeric keypad Pressing the Fn key simultaneously in combination with one of the specially marked keys allows you to emulate a full size keyboard Your computer s keyboard has only one Enter and one Ctrl key Most of the time this does not matter However some 10 Learning the Basics Using the keyboard programs assign separate functions to the right and left Ctrl and Alt keys or to the regular and numeric pad Enter keys on the full sized keyboard Using the Fn key you can simulate these separate keys as follows Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard Press Fn an
60. Hibernation mode The message box can be set so it does not display Do vou with to switch the machine to hibernation Do not show this message in the future Sample Hibernation confirmation box If Hibernation mode is disabled this hot key will not respond For more information on Hibernation mode see Enabling Hibernation on page 156 ner 1 95 Display modes Fn This hot key cycles through the power on display options The display modes are Built in display panel only Built in display panel and external monitor simultaneously External monitor only Built in display panel and external video device simultaneously External video device only Sample display options window In order to use a simultaneous mode you must set the resolution of the internal display panel to match the resolution of the external display device Display brightness Fn a This hot key decreases the screen brightness Fn za This hot key increases the screen brightness m 2 PaaS 1 96 Hot Keys Disabling or enabling the TouchPad Disabling or enabling the TouchPad Fn E This hot key enables disables the TouchPad To use the TouchPad see Disabling or enabling the TouchPad on page 55 Sample disable and enable TouchPad windows Keyboard hot keys Fn EN This hot key turns the cursor control overlay on and off This hot key turns the numeric overlay on and off Fn w Thi
61. Identifying the ends of a parallel printer cable 4 Plug the printer s power cable into a live electrical outlet 5 See your printer documentation for additional configuration steps For more information on getting your printer to print see Printing your work on page 78 Expansion Options 1 1 D Using a printer Setting up your printer Setting up a printer involves selecting a printer driver This special program acts as a translator that turns your document into a form the printer can understand If you are using any non Windows programs set up a printer driver for each of those programs Refer to your program s documentation for more information TECHNICAL NOTE If you have the manufacturer s disk that came with your printer you can use it to install the printer on your computer The manufacturer s disk may include additional drivers and fonts Va To set up a printer with the Add Printer Wizard 1 Click Start and click Printers and Faxes The operating system opens a Printers and Faxes window Fie Edt ew Fabes Took Help O O f set fries i Sample Printers and Faxes window 2 Click Add Printer The Add Printer Wizard appears 1 1 6 Expansion Options Using a printer Add Printer Wizard Welcome to the Add Printer Wizard This wizard helps you install a printer or make printer connections If you have a Plug and Play printer that connects JJ through a USB port for any oth
62. Other Hardware window Close the Control Panel window 56 Getting Started Setting up your software You can also use a hot key to disable or enable the TouchPad See Disabling or enabling the TouchPad on page 196 Setting up your software The first time you turn on your computer the Setup Wizard guides you through steps to set up your software 1 From the welcome screen click Next to enter the Setup Wizard 2 Confirm acceptance of Microsoft s End User License Agreement and click Next 3 Enter the computer name and description and click Next or Skip The computer will pause for a moment while checking for an internet connection A window will display the message An Internet connection could not be chosen 4 Click Skip to exit the process or Next to continue NOTE To register online your computer s modem must be connected to a voice grade telephone line A window will display asking if you wish to register with Toshiba and Microsoft 5 Click Yes to register or No to exit the process NOTE If you click No you may register with Toshiba by clicking the Register with Toshiba icon on the desktop 6 Enter your personal information in the registration window Getting Started 5 Registering your computer with Toshiba 7 Enter your name and click Finish to complete the process Your computer restarts automatically Registering your computer with Toshiba To register your
63. Productivity 1 39 Inserting and removing PC Cards 3 Insert the PC Card Inserting a PC Card 4 When the card is almost all the way into the slot push firmly but gently to ensure a firm connection with the computer Do not force the card into position Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray After the PC Card is stopped it is safe to remove 1 Locate the PC Card ejection button 2 Press the PC Card eject button once to extend it and push it in to remove the PC Card Press the PC card ejection button once to extend it 1 A Enhancing Productivity Using SD cards The PC Card ejects slightly from the slot 3 Grasp the edges of the PC Card and slide it out of the slot Inserting and removing Wi Fi modules Your system may come with an optional Wi Fi module If you wish to insert or remove a Wi Fi module contact a Toshiba Wireless Authorized Service Provider Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them Others such as hard disk cards network cards and SCSI adapters may need to be set up to work with your computer To set up your PC Card refer to the documentation that came with the card or refer to your operating system manual or online help Using SD cards Your computer supports the use of SD memory input output cards The cards can be used with a variety of digital products
64. RMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL SPECIAL OR EXEMPLARY DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF Trademarks Satellite and Noteworthy are registered trademarks SelectServ FreedomWare and SmartMedia are trademarks of Toshiba America Information Systems Inc and or Toshiba Corporation Microsoft Windows DirectX Active Desktop and DirectShow are registered trademarks and Windows Media is a trademark of Microsoft Corporation LapLink is a registered trademark of Traveling Software Inc ConfigFree is a trademark of Toshiba Corporation Wi Fi is a registered trademark of the Wireless Capability Ethernet Alliance Dolby Manufactured by Toshiba under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories TouchPad is a trademark of Synaptics Inc All other brand and product names are trademarks or registered trademarks of their respective companies
65. Running the computer on battery power Flashing amber indicates that the computer is using battery power and the battery s charge is running low HINT Be careful not to confuse the battery light lt 4 with the on off light lt gt When the on off light flashes amber it indicates that the system is Suspended using Windows XP standby command Displaying remaining battery power You can monitor the battery s remaining charge The computer calculates the remaining battery charge as it operates based on your current rate of power use To show remaining power 1 Open the Start menu click Control Panel then Performance and Maintenance 2 Click the Toshiba Power Saver icon The Toshiba Power Saver Properties dialog box appears Mobile Computing Running the computer on battery power 4 TOSHIBA Power Saver Properties a gt Current power source AC power Battery remaining 5 Profile Normal Standby Life Tine 67 hour Life under Hibernation Time 27 days Setup Items Setup for Effective Use Screen brightness Xk High Power CPU control method fa O uto Hold CPU process speed 0 DVD Playback Cooling Method D Setup for Effective Not in Use Presentation Monitor Power OFF E 0 Long Life HDD Power OFF S a Copy of Full Power System standby gpr System hibernation 3 oO Setup Options Level 8 Level 7 Maximum Performance 30 minutes 30 m
66. SOC RJ1 1C Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum DSSS radio technology and is compliant to The IEEE 802 11 Standard on Wireless LANs Revision A B as defined and approved by the Institute of Electrical and Electronics Engineers The Wireless Fidelity Wi Fi certification as defined by the WECA Wireless Ethernet Compatibility Alliance CAUTION Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off either one of your Bluetooth or Wireless LAN Please contact Toshiba PC product support on Web site htto www toshiba europe com computers tnt bluetooth htm in Europe or htto Awww pcsupport global toshiba com in the United States for more information This device is restricted to indoor use due to its operation in the 5 15 GHz to 5 85 GHz frequency range Wireless LAN and your Health Wireless LAN products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless LAN devices however is far much less than the e
67. To change the display properties 1 Point at the desktop and click with the secondary button The Display Properties window appears Click Properties then click the Settings tab Adjust the screen resolution and or color quality 4 Click OK The display mode is set to Simultaneous and the external display device does not work Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher Devices that do not support this resolution will only work in Internal External mode Small bright dots appear on your TFT display when you turn on your computer Your display contains an extremely large number of thin film transistors TFT and is manufactured using high precision technology The small bright dots that appear on your display are an intrinsic characteristic of the TFT manufacturing technology Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors 1 16 lf Something Goes Wrong Resolving a hardware conflict Sometimes a disk problem may cause one or more files to appear to have garbage in them Typical disk problems are You are having trouble accessing a disk or one or more files appear to be missing Make sure you are identifying the drive by its correct name A or C Error checking Run Error checking which analyzes the directories files and File Allocation Table FAT on the disk and re
68. a IC This device complies with RSS 210 of Industry Canada The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population consult Safety Code 6 obtainable from Health Canada s Web site www hc sc gc ca rpb The RF device shall not be co located with any other transmitter that has not been tested with this device Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device L utilisation de ce dispositif est autoris e seulement aux conditions suivantes 1 il ne doit pas produire de brouillage et 2 l utilisateur du dispositif doit tre pr t a accepter tout brouillage radio lectrique recu m me si ce brouillage est susceptible de compromettre le fonctionnement du dispositif The term IC before the equipment certification number only signifies that the Industry Canada technical specifications were met To prevent radio interference to the licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Pour empecher que cet appareil cause du brouillage au service faisant l objet d une licence il doit etre uti
69. able is an IEEE 1284 cable These instructions assume you have a parallel printer If you have a USB printer consult the document that came with your printer To connect the printer 1 Ifthe computer is on turn it off 2 Connect the printer cable to the printer and to the Loe computer s parallel port Use the printer cable illustration as a connection guide o CH o To the computer To the printer Identifying the ends of a parallel printer cable 3 Plug the printer s power cable into a live electrical outlet 4 See your printer documentation for additional configuration steps NOTE some printers use USB to connect For more information on setting up your printer see Using a printer on page 113 For more information on getting your printer to print see Printing your work on page 78 Getting Started 65 Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations such as creating a password service diskette require a diskette drive designed for use with 3 5 inch diskettes An optional external USB diskette drive To connect an optional external USB diskette drive connect the cable to one of the USB ports Connecting an optional external USB diskette drive 66 Getting Started Connecting external speakers or headphones Connecting external speakers or headphones To attach an external stereo output device AQ 1 Lo
70. ade to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation Contact Toshiba America Information Systems Inc 9740 Irvine Blvd Irvine CA 92618 1697 949 583 3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conform a la norme NMB 003 du Canada FCC requirements The following information is pursuant to FCC CFR 47 Part 68 and refers to internal modems This equipment complies with Part 68 of the FCC rules On the bottom of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested the information must be provided to the telephone company The modem connects to the telephone line by means of a standard jack called the USOC RJLIC A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA A compliant telephone cord and modular plug is provided with thi
71. adio station 1 Sticker Please put the following sticker on devices incorporating this product In the frequency bandwidth of this equipment industrial device scientific device medical device like microwave oven licensed premises radio station and non licensed specified low power radio station for mobile object identification system RF ID that is used in product line of factories Other Radio Stations are used 1 Please make sure before using this equipment that no Other Radio Stations are used in the neighborhood 2 In case that RF interference occurs to Other Radio Stations from this equipment please change promptly the frequency for use place to use or stop emitting Radio 3 Please contact TOSHIBA Direct PC if you have a problem such as interference from this equipment to Other Radio Stations 2 Indication The indication shown below appears on this equipment W 2 8 dal AHi 4 2 4 This equipment uses a frequency of 2 4 GHz FH This equipment uses FH SS modulation The interference range of this equipment is less than 10m A Ww N m This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz It is impossible to avoid the band of mobile object identification systems 2l 3 TOSHIBA Direct PC Monday Friday 10 00 17 00 Toll Free Tel 0120 13 1100 Direct Dial 03 3457 5916 Fax 03 5444 9450 Device Authorization This device obtains the Technical Regulation Conformit
72. age and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges In order to program this information into your fax transmission refer to the fax software instructions installed on this computer 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line ensure the installation of this equipment does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer Instructions for IC CS 03 Certified Equipment 1 NOTICE The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document s The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situa
73. al tape drive Restoring your work To restore information from your backup media to your hard disk use the Restore page in the backup program Look in the online Help or your operating system documentation for information on restoring files TECHNICAL NOTE When restoring files the backup program L prompts you if you try to overwrite a file that already exists on f the hard disk Make sure the backup version is the one you want before overwriting the existing file Learning the Basics OF Preparing for communications Preparing for communications To connect to the Internet use an online service or communicate across the telephone lines with another computer you need A modem supplied with your computer A telephone line A browser or communications program An Internet Service Provider ISP or an online service if you plan to use the Internet Before you can use the modem you must connect it to a standard voice grade telephone line See Connecting to a power source on page 43 for details Powering down the computer NOTE Pushing the power button before shutting down the Windows operating system could cause you to lose your work Make Sure the system indicator panel s disk light and the drive in use light are off If you turn off the power while a disk is being accessed you may lose data or damage the disk and or drive When you power down the computer you have three options to c
74. ams Point to the TOSHIBA ConfigFree folder and then click ConfigFree Double click the ConfigFree icon 4 on the taskbar 4 Click the ConfigFree icon on the taskbar and then click the desired utility Press the Toshiba Console button if applicable to your system to open the Toshiba Console and then click the ConfigFree icon Configuring ConfigFree The ConfigFree Option dialog box is used to specify various options such as whether certain warning messages should display and what information should be captured when creating a profile You can also enable and disable sounds from this dialog box To access the ConfigFree Option dialog box do one of the following Open ConfigFree and then click Options Using ConfigFree with your Toshiba Computer 201 ConfigFree Utilities Right click the ConfigFree icon on the taskbar and then click Options For more information on configuring ConfigFree see the online help ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network For wireless network devices the signal strength and WEP Wired Equivalent Privacy key settings if applicable also display NOTE Infrared for systems with infrared and dial up devices are not tested by the Connectivity Doctor If a problem or potential problem is de
75. an electric current passes through the electrodes the molecules in the liquid form a crystalline pattern that polarizes the light passing through it A filter over the electrodes permits only non polarized light to pass to the surface of the display creating light and dark pixels load To move information from a storage device such as a hard disk into memory for processing 218 local area network See LAN logical drive A section of a disk that is recognized by the operating system as a separate disk drive A system s logical drives may differ from its physical drives For example a single hard disk drive may be partitioned into two or more logical drives M megabyte MB A unit of data equal to 1 048 576 bytes 1024 x 1024 bytes See also bytes memory Typically refers to the computer s main memory where programs are run and data is temporarily stored and processed Memory can be volatile and hold data temporarily such as RAM or it can be nonvolatile and hold data permanently such as ROM A computer s main memory is RAM See RAM ROM microprocessor See central processing unit CPU MIDI Musical Instrument Digital Interface A standard for connecting musical instruments synthesizers and computers The MIDI standard provides a way of translating music into a form computers can use and vice versa modem Short for modulator demodulator A device that converts information
76. an use it for longer periods of time while traveling For more information on managing your power usage see Power profiles in Windows XP on page 110 This chapter covers all the aspects of using your computer on battery power 99 1 0 Mobile Computing Running the computer on battery power Running the computer on battery power q__ The computer contains a removable Lithium Ion Li ion battery pack that provides power when you are away from an AC outlet This is the main battery You can recharge it many times I TECHNICAL NOTE For optimum DVD performance always L play DVDs while your computer is connected to AC power Battery Notice To ensure that the battery maintains its maximum capacity operate the computer on battery power at least once a month until the battery is fully discharged Please see Maximizing battery life on page 101 for procedures If the computer is continuously operated on AC power either through an AC adapter or a docking station if applicable to your system for an extended period more than a month the battery may fail to retain a charge This may shorten the life of the battery and the battery light may not indicate a low battery condition The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information It maintains this information for up to a month while the computer is turned off TECHNICAL NOTE The
77. and click New Connection Wizard 3 Enter the phone number of your network connection and let the program dial the number The computer connects to the network Using the Ethernet LAN Port When your computer starts Windows attempts to contact a Dynamic Host Configuration Protocol DHCP server If the computer is not connected to a network it may pause a few 1 20 Enhancing Productivity Exchanging data with another computer minutes as it waits for a reply To avoid this delay you can reconfigure Windows to disable the LAN port To disable the LAN port 1 Click Start click Control Panel then Performance and Maintenance 2 Click the System icon then click the Hardware tab and then click the Device Manager button 3 Select Intel Pro 100 VE Network Connection in Network adapters 4 Click Actions Select the Properties icon Select the Do not use this device disable option from the Device usage drop down 7 Click OK Your LAN port is now disabled To enable the Ethernet LAN port repeat steps one through four Select the Use this device enable check box and click OK Setting up a wireless connection For information on how to set up a wireless connection refer to your wireless networking device documentation or your network administrator Using Wireless LAN Connectivity Your system may come with an optional wireless LAN module This is a technology that expands wireless communication beyond netwo
78. and c simultaneously to copy the text to the clipboard Open Notepad click Start point to All Programs then point to Accessories and click Notepad Press Ctrl and v simultaneously to paste the details into Notepad Add a paragraph break and type some notes describing what you were doing when you received the message lf Something Goes Wrong 1 63 Problems when you turn on the computer 6 Save the file and refer to it when you contact the software manufacturer Problems when you turn on the computer These problems may occur when you turn on the power The computer will not start Make sure you attached the AC adapter and power cable properly or installed a charged battery Press and hold down the power button for a few seconds If you are using the AC adapter check that the wall outlet is working by plugging in another device such as a lamp The computer starts but when you press a key nothing happens You are probably in Stand By mode and have a software or resource conflict When this happens turning the power on returns you to the problem instead of restarting the system To clear the condition press Ctrl Alt and Del simultaneously Clearing the condition may get the computer running but it will not solve a resource conflict Read the documentation that came with the conflicting device and Resolving a hardware conflict on page 167 The computer is not accessing the hard disk or the external dis
79. ata please make periodic back up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures alteration or loss of the data IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA OR ANY OTHER DAMAGE RESULTING THEREFROM WHEN COPYING OR TRANSFERRING YOUR DATA PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY Critical Applications The computer you have purchased is not designed for any critical applications Critical applications means life support systems medical applications connections to implanted medical devices commercial transportation nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage ACCORDINGLY TOSHIBA ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION YOU AND NOT TOSHIBA ASSUME FULL RESPONSIBILITY FOR SUCH USE FCC Notice Declaration of Conformity Information This equipment has been tested and found to comply with
80. attery into the slot until the latch clicks The battery pack has been designed so that you cannot install it with reverse polarity CAUTION lf the battery does not slide into the slot easily move the battery release lock to the unlocked position and try again Do not force the battery into position 10 Reset the battery lock to the locked position 11 Turn the computer right side up 12 Reconnect any cables 13 Restart the computer Mobile Computing 1 09 Conserving power Disposing of used batteries The life of a battery pack should last for years When the battery pack needs replacing the main battery light flashes amber shortly after you have fully recharged the battery You must discard a battery if it becomes damaged AWARNING he computer s main battery is a Lithium lon Li lon battery which can explode if not properly replaced used handled or disposed of Putting spent batteries in the trash is not only irresponsible it may be illegal Dispose of the battery as required by local ordinances or regulations Use only batteries recommended by Toshiba After repeated use the batteries will finally lose their ability to hold a charge and you will need to replace them Under federal state and local laws it may be illegal to dispose of old batteries by placing them in the trash Please be kind to our shared environment Check with your local government authority for details regarding where to
81. back support Lower back support cushions are available at many office supply stores Sit with your back straight so that your knees hips and elbows form approximately 90 degree angles when you work Do not slump forward or lean back too far Lighting Proper lighting can improve the readability of the display and reduce eyestrain gt Position the display panel or external monitor so that sunlight or bright indoor lighting does not reflect off the screen Use tinted windows or shades to reduce glare Avoid placing your computer in front of a bright light that shines directly into your eyes gt If possible use soft indirect lighting in your computer work area Arms and wrists Avoid bending arching or twisting your wrists Keep them in a relaxed neutral position while typing gt Exercise your hands wrists and arms to improve circulation Getting Started 4 Other precautions Work habits The key to avoiding discomfort or injury from strain is to vary your activities If possible schedule a variety of tasks into your working day Finding ways to break up the routine can reduce stress and improve your efficiency Take frequent short breaks to change position stretch your muscles and relieve your eyes A break of two or three minutes every half hour is more effective than a long break after several hours Avoid performing repetitive activities for l
82. cate the headphone jack near the front of the right side of the computer 2 Using any necessary adapters plug the cable from the external audio device into the headphone jack The headphone jack requires a 3 5 mm 16 ohm stereo jack When the headphone is inserted the internal speakers are automatically disabled Connecting a microphone To record high quality sounds you can attach a microphone 1 Locate the microphone jack near the front of the right side of the computer 2 Plug the microphone cord into the jack 3 Turn on the microphone For more information see Recording sounds on page 132 Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features Computing tips Save your work frequently Your work stays in the computer s temporary memory until you save it to the disk If the network you are using goes down and you must restart your computer to reconnect or your battery runs out of charge while you are working you will lose all work since you last saved See Saving your work on page 76 for further information para HINT Some programs have an automatic save feature that can es be activated This feature saves your file to the hard disk at ASLA preset intervals See your software documentation for details 6 63 Learning the Basics Computing tips gt Back up your files to
83. cator panel glows blue about one second Getting Started 53 Using the TouchPad Turning on the power 4 The preinstalled operating system will load automatically CAUTION When you turn on the computer for the first time do not turn off the power again until the operating system has loaded completely Using the TouchPad The TouchPad the small smooth square cutout located in front of the keyboard is sensitive to touch and enables you to move the cursor with the stroke of a finger Simply move your finger on the TouchPad in the direction you d like to move the cursor To move the cursor to the top of the page push your finger forward on the TouchPad To move the cursor to the bottom of the page drag your finger toward yourself To move the cursor to the right side of the page slide your finger across the TouchPad from left to right 5 4 Getting Started Using the TouchPad o To move it to the left side slide your finger from right to left NOTE Because the TouchPad is much smaller than the display screen moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction Once you ve positioned your cursor you can either click it into place by double tapping the TouchPad or clicking the control buttons Scrolling with the TouchPad There are two active regions on the TouchPad that allow you t
84. cccccccrcc 57 Turning off the computer eeeeceesseeeeen O Closing the display panel ou cesses 58 Using external display devices cssc 08 Connecting the display device ccce 59 Directing the display output when you turn on the computer sscccccscccecer 61 Adjusting the quality of the external display 62 Using an external keyboard cssc 63 USING amp MOUSE ooo cece ec cesses scesseeesessseeeeeessseeeeess 63 Connecting a local printer aeee 63 Connecting an optional external diskette drive 65 Connecting external speakers or headphones 66 Connecting a microphone ssec 66 Chapter 2 Learning the BaSiCS accens 67 COMPUTING TIPS occire 67 Using the keyboard cecccsscssseeeeseseeeeesesseeeeess 69 Character keys ooo cecceeecsssesesseeesnesennens 69 Making your keyboard emulate a full size REVO ONG sesscouctesacoreccracsuenracnscunvereudesanout 69 Ctrl Fn and Alt keys ccecce 70 UE GUO KOVO eeiactaeecacseec ae cg eeseed cence eee 10 Windows special KEYS ececcecessseseeeseesseeees 71 Overlay keys wo ices eccceeccssessceeseseeeeeeeeeeneens 71 Using the overlay to type numeric data 12 Starting A program oo cecceseseesessseeeeseseeeeeeeseees 13 starting a program from the Start ment 13 Starting a program from Windows Explorer 74 Contents 27 Starting a program from the Run dialog box 75 Saving your WOFK eceecserieerrserreerieerresrnn 76 Printing your WOKK ccccce
85. cccccce 130 Playing CDs using Auto Run ccecce 132 Creating a CD oo ccc esccseseseseeneeeeees 132 Recording sounds ccce 132 Using external speakers or headphones 135 Inserting and removing hard drives secc 136 Inserting and removing PC Cards 138 Inserting a PO Card oes cceceseesseeneees 138 Removing a PC Card ou cece eseseeeeeen 139 Inserting and removing Wi Fi modules 140 setting up a PC Card for your computer 140 Using SD Cards oo eeesesecesseseseseeeeeeeeeee 140 Inserting an SD card aaeeea 140 Removing an SD card n se 141 Using the i LINK port wo eeseeeeeeeeereeee 142 Connecting your modem to a telephone line 142 Connecting to a phone line ou 143 Chapter 6 Toshiba Utilities 0 eeeeeeen 145 ROS SC panonia ea a 146 Starting Fn esse aiiin 146 Using the keyboard or pointing device to aSSign keys asscscsssirieseennineerrnrrreerrrnnnnes 148 Viewing existing key assignments 149 Changing or removing existing key ASSIGNMENTS wccscsaiscsacdiessaveessccnscasaconnennass 150 TOSHIBA Console scce 150 Customizing Your Computer ssassn 151 NOUWOTK scotistencecdaceenee det ott ii tanto dttececseaee 151 Security voce ececccccceccsesescsseesesseesesseesesseeseneeesaes 151 Power Management scenerne 151 30 Contents Mouse utility ccce 153 HOKEY UII essre 154 Toshiba Hardware Settings c c 154 Enabling Hibernation cece ccesessseeeeeeeesseees 156 Setti
86. cecceeseeeeeeecesseeeeeeeessteeeeeens 18 Using the DVD ROM or multi function drive 19 CD DVD control buttons ccce 81 Inserting compact CISCS secsec 82 REMOVING COMPACT AISCS eseese 64 Caring for CDs or DVDs Discs ou eee 85 Using PG Cards scncese 86 HOt SWAPPING oo eee cceecesccecceesseeeeesesseeeeeeeeeens 86 Using SD Secure Digital cards ou 87 Using your computer at the office ee 87 Using a computer lOCK nocsccccccecenses 88 Caring for your COMPUTED ccce 89 Cleaning the Computer ou cece 89 Moving the computer cece ee ceceeseeeeeeeees 89 Backing UP YOUP WOPK ou cee eeecceseceeeeesseeeeeeseesseeees 90 Restoring your WOKK vu cee eeceeseeseeeeeesseeeeeeeens 90 Preparing for COMMUNICATIONS seeren 91 Powering down the computer ceeeeeee 91 Using Turn Off Computer or Shut Down 92 Using Hibernation ccce 94 USING SIANGDY creron 96 Toshiba s online resources eerren 98 Chapter 3 Mobile Computing cecce 99 Toshiba s energy Saver Ce SIQN cccccceeeeeeee 99 Running the computer on battery power 100 Battery Notice eener 100 Charging the battery ccce 100 Maximizing battery life e 101 Charging the RIC battery oo ee 102 Monitoring battery power cc eeseeeeeee 103 What to do when the battery alarm sounds 106 P 8 Contents Changing batteries ceren 107 Disposing of used batteries ncc 109 Conserving pOWET escesceriiierrierierrerre
87. crewdriver unscrew the screw that secures the memory slot cover then remove the memory slot cover Removing the memory module cover 7 Place the screw and the cover in a safe place so that you can retrieve them later Getting Started 49 Adding memory CAUTION Static electricity can damage the memory module Before you handle the module touch a grounded metal surface to discharge any static electricity you may have built up To avoid damaging the memory module be careful not to touch its pin connector on the side you insert into the computer 8 Remove the new memory module from its antistatic packaging 9 Holding the memory module by its edges so that the gold connector bar faces the slot fit the module into the socket 10 Gently press down on the memory module connector until the clips snap into place Do not force the module into position The memory module should be level when secured in place Inserting the memory module into the slot The clips on either side of the module will click to secure the module 50 Getting Started Adding memory CAUTION Avoid touching the connectors on the memory module or on the computer Grease or dust on the connectors may cause memory access problems 11 Replace the cover plate and the screw 12 Turn the computer over and restart it You can now continue setting up the computer When the operating system has loaded you can verify that the co
88. ct to the Internet use an online service or communicate across the telephone lines with another computer you need A modem one comes with your Satellite M30 M35 Series computer A telephone line A browser or communications program An Internet Service Provider ISP or online service if you plan to use the Internet Determining the COM port Your modem is connected to one of the computer s COM communications ports The default setting for the modem is COMS The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings 124 Enhancing Productivity Exchanging data with another computer If you re having trouble connecting through the modem you may need to determine the current COM port name and possibly change it To find out which port your modem is connected to 1 2 Open the Start menu click Control Panel Click Phone and Modem Options The Phone and Modem Options Properties dialog box displays Click the Modems tab Your modem should be listed next to one of the computer s COM ports Make a note of the COM port number To verify that the modem is set up properly select the modem you wish to check and then click Properties to bring up the dialog box with information specific to that modem Click the Diagnostics tab and then click Query Modem Windows XP communicates with the modem and displays identifying
89. d try using an application that is associated with the media on the disk For example if it is a music CD open Windows Media Player and point it to play the CD For other types of media use the associated software to open the files on the disk Creating a CD Your computer may come with a multi function drive that allows you to Play pre recorded DVDs gt gt Play pre recorded CDs Read and write files including music to a CD Recordable CD R CD Rewritable CD RW disc DVD R RW or a DVD RAM For details on how to use the software please refer to the respective Online Help menus Recording sounds You may record sounds as wav files by connecting an external microphone or other sound source to the microphone jack You may also record sounds using the computer s built Enhancing Productivity 1 33 Exploring audio features in microphone located to the left of the CTRL key on the keyboard DEFINITION A wav pronounced wave file is a Windows AW format for storing sound rf gt Z TECHNICAL NOTE If you record MP3 files you will only be able to play them on a device capable of playing MP3 files Using a microphone 1 Connect an external microphone to the computer He 2 Click Start point to All Programs Accessories Entertainment then click Sound Recorder 4 Sound Sound Recorder E K File Edit Effects Help Lenath
90. d Enter simultaneously to simulate the Enter key on the numeric pad of the enhanced keyboard Ctrl Fn and Alt keys TI Ctrl Fn and Alt keys The Cirl Fn and Alt keys do different things depending on the program you are using For more information see your program documentation Function keys The function keys not to be confused with the Fn key are the 12 keys at the top of the keyboard AAA E a F2 a ee F4 Ec Fea EA l The function keys F1 through F12 are called function keys because they execute programmed functions when pressed Used in combination with the Fn key function keys marked with icons execute specific functions on the computer Fn F9 turns off the TouchPad For more information see Fn esse on page 146 or Hot Keys on page 191 Learning the Basics 11 Using the keyboard Windows special keys Start key Application key The Windows special keys Your computer s keyboard has two keys that have special functions in Windows Start key Opens the Start menu Application key Has the same function as the secondary mouse or AccuPoint II button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay This overlay lets you enter numeric data or control the cursor as you would using the 10 key keypad on a desktop computer s keyboard aah a HA E aman e am on en ae ACACA I
91. d files you were using NOTE If you power down using the Standby command and the main battery discharges fully your information will be lost Be sure to save your work first To power down the computer using the Standby command click Start Turn off computer and select Stand By Learning the Basics O Powering down the computer Turn off computer O amp Stand By Restart Cancel Sample Turn off computer Windows dialog box NOTE If you hold down the Shift key Stand By becomes Hibernate in the Turn off computer dialog box To enter hibernation mode you must hold down the Shift key while you select Hibernate The computer saves the status of all open programs and files turns off the display and goes into a low power mode The on off light blinks amber indicating the machine is in Standby mode Going into Standby mode more quickly In addition you can put the computer into Standby mode by either pressing the power button or closing the display panel You can also specify an amount of time after which the computer automatically goes into Standby mode To use any of these methods you first need to enable them in Toshiba s Power Saver utility 1 Open the Start menu click Control Panel then Performance and Maintenance 2 Click the Toshiba Power Saver icon 3 Click the Setup Action tab 4 Select Standby for the options you want 98 Learning the Basics Toshiba s online resources W
92. d use the many preset power modes or create one yourself 1 5 Toshiba Utilities TOSHIBA Console qb To access Power Management through the TOSHIBA Console double click the Power Management icon The TOSHIBA Power Saver Properties window appears Setup tor Effective Use Screen brights kos J Leag Sap CPU cortrol method fall CPU process speed J leva7 we pen L g Method J HasimumPetamance etup lo Effective Not in Use i 20 nines HDD Power OFF B Q Copy of Fud Penns Syatem standby o System hbemaor o x c Long ite Sample Toshiba Power Saver Properties window The Power Properties window shows the power profiles which are optimized for several different working environments You can either use one of the preset modes or create and use your own customized profile The preset profiles cannot be deleted By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK you can reconfigure that function Any options that you change become effective when you click either OK or Apply Profiles This section lists the preset profiles along with the estimated battery life for each mode The preset profiles are Full Power Toshiba Utilities 1 53 TOSHIBA Console High Power Normal DVD Playback Presentation Although you can change the properties for any of these profiles this is not recommended If you need a customized profile create a ne
93. de edge Fingerprints on the surface can prevent the DVD ROM drive or multi function drive from reading the data properly Do not expose discs to direct sunlight or extreme heat or cold To clean a disc that is dirty wipe it with a clean dry cloth The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge not in a circle If necessary moisten the cloth with water or a neutral cleaner not benzine or rubbing alcohol Let the disc dry completely before inserting it in the drive 86 Learning the Basics Using PC Cards Using PC Cards I TECHNICAL NOTE For PCMCIA compatible PC Cards check L the package to make sure they conform to the PCMCIA 2 1 A standard or later Other cards may work with your computer but are likely to be much more difficult to set up and use For information on inserting or removing a PC Card see Inserting and removing PC Cards on page 138 Hot swapping With PC Cards you can replace one PC Card with another while the computer is on This is called hot swapping Hot swapping precautions Although you can insert a PC Card at any time remember not to remove a card while it is in use Otherwise you could lose valuable information For example Do not remove a hard disk card while the system is accessing it Do not remove a network card while you are connected to a network Do not remove a SCSI card while any of
94. default change the connection setting by using Quick Connect Setup menu NOTE The connection will be made in Ad hoc mode therefore if the setting on the Toshiba Wireless Projector is in Infrastructure mode it will not connect 206 Using ConfigFree with your Toshiba Computer Using Auto Switch If the wireless mode for the wireless setting is set for 5GHz 802 1 1a Quick Connect will change this mode to 2 4GHz 802 11b and then connect to the projector The wireless LAN configuration will return to the default settings under the following conditions If the Toshiba Wireless Projector utility is closed If you select Toshiba Wireless Projector DPJ from the ConfigFree tray menu this will disconnect the wireless LAN connection If you select a profile from the ConfigFree tray menu or when you disable a wireless device If you close ConfigFree Using Auto Switch The Auto Switch feature contains options for automatically switching network devices and profiles if a network connection should fail gt Auto Switch Cable Disconnect This option automatically switches network devices if a wired network cable is disconnected For more information see Auto Switch Cable Disconnect on page 207 Auto Switch SSID If your notebook computer is connected to a wireless LAN network ConfigFree automatically switches profiles if a network failure occurs For more information see
95. disk drives monitors keyboards and printers all require controllers CPU See central processing unit CPU CPU cache A section of very fast memory residing between the CPU and the computer s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs See also cache LI cache L2 cache cursor A symbol that indicates the current position on the screen The shape of the cursor varies depending on the program you re using and what you re doing default The setting selected by a program when the user does not specify an alternative setting device A component attached to the computer Devices may be external outside the computer s case or internal inside the computer s case Printers disk drives and modems are examples of devices device driver A program called a driver that permits a computer to communicate with a device dialog box An on screen window displayed by the operating system or a program giving a direction or requesting input from the user direct current DC The type of power usually supplied by batteries DC flows in one direction Compare alternating current AC direct memory access DMA A dedicated channel bypassing the CPU that enables direct data transfer between memory and a device directory See folder 214 om disable To turn a computer option off See also enable disc
96. disks or other removable media on a regular basis Label the backup copies clearly and store them in a safe place It s easy to put off backing up because it takes time However if your hard disk suddenly fails you will lose all the data on it unless you have a separate backup copy Use Error checking and Disk Defragmenter regularly to conserve disk space and improve performance Scan all new files for viruses This precaution is especially important for files you receive via diskette email or download from the Internet Take frequent breaks to avoid repetitive motion injuries and eyestrain Do not turn off the computer if a drive indicator light indicates a drive is active Turning off the computer while it is reading from or writing to a disk may damage the disk the drive or both Before turning off the computer use the Turn off computer command or Standby command See Powering down the computer on page 91 to learn more about Standby NOTE The Windows XP operating system records information such as your desktop setup during its shutdown procedure If you do not let the Windows XP operating system shut down normally details such as new icon positions may be lost Learning the Basics 69 Using the keyboard Using the keyboard Your computer s keyboard contains character keys control keys function keys and special Windows keys providing all the functionality of a full size keyboard
97. drives 7 Grasp the edge of the hard drive and pull it toward the edge of the computer then lift it straight up to remove it Removing the hard drive from the computer 8 Install the new hard drive by setting it into the hard drive slot and sliding back toward the center of the computer until it locks Do not force the drive into the computer Inserting the new hard disk drive 9 Replace the hard drive cover and tighten the screw removed in step 5 above 1 38 Enhancing Productivity Inserting and removing PC Cards Inserting and removing PC Cards Your Satellite M30 M35 Series computer comes with one PC Card slot and supports two types of PC Cards Type I cards You can install one of these cards one in each slot Type II cards You can install one of these cards one in each slot Inserting a PC Card NOTE Use caution when lifting or turning your computer Failure to do so may result in damage to components such as cables attached to your computer or to the computer itself Before you insert a PC Card refer to the documentation that comes with the card to see if you need to do anything before you insert it To insert a PC Card 1 Turn off the computer You may also hot swap a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray After the PC Card is stopped it is safe to remove 2 Locate the PC Card slot on the left side of the computer Enhancing
98. e TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized In normal operating configuration the LCD in the upright position the distance between the antenna and the user should not be less than 20 cm The antenna s used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter Antenna s used in 5 15 GHz to 5 25 GHz frequency band must be integral antenna which provide no access to the end user Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information Caution Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5 15 GHz to 5 25 GHz frequency range FCC requires this product to be used indoors for frequency range 5 15 GHz to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of the 5 25 GHz to 5 35 GHz and 5 65 GHz to 5 85 GHz bands These radar stations can cause interference with and or damage this device NOTE The above Caution information applies to products that operate with an 802 114 device Taiwan Article 14 Unless approved for any model accredited low power radio frequency electric machinery any company trader or user shall not change the frequency increase the po
99. e equipment certification number only signifies that the Industry Canada technical specifications were met Caution FCC Interference Statement This device complies with part15 of the FCC rules Operation is subject to the following two conditions This device may not cause harmful interference and 19 This device must accept any interference received including interference that may cause undesired operation Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the authorization to operate this equipment Caution Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits Nevertheless the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized In order to comply with FCC radio frequency radiation exposure guidelines for an uncontrolled environment the Bluetooth Card from TOSHIBA has to be operated while maintaining a minimum body to antenna which are located on top of LCD distance of 20 cm Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information The Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits Nevertheless it is advised to use the Bluetooth Card from TOSHIBA in such a
100. e is some other warning to indicate a low battery go to step 4 Connect the AC adapter to the computer and the power cord to a power outlet The DC IN or AC power light LED should glow blue and the Battery LED should glow amber to indicate that the battery pack is being charged If the DC IN or AC power light indicator does not glow power is not being supplied Check the connections for the AC adapter and power cord 1 0 Mobile Computing Running the computer on battery power 5 Charge the battery pack until the Battery LED glows blue If you have extra battery packs rotate their use If you will not be using the system for an extended period more than one month remove the battery pack Disconnect the AC adapter when the battery is fully charged Overcharging makes the battery hot and shortens life If you are not going to use the computer for more than eight hours disconnect the AC adapter Store spare battery packs in a cool dry place out of direct sunlight Charging the RTC battery Your computer has an internal real time clock RTC battery The RTC battery powers the System Time Clock and BIOS memory used to store your computer s configuration settings When fully charged it maintains this information for up to a month when the computer is powered off The RTC battery may have become completely discharged while your computer was shipped resulting in the following error message during startup
101. e methods you first need to turn it on in Toshiba s Power Saver utility 1 Open the Start menu click Control Panel then Performance and Maintenance Click the Toshiba Power Saver icon Click on the Setup Action tab Select the options you want from the drop down lists When I press the power button Set this option to Shutdown to have the computer shut down when you press the power button Click Apply Click OK rue hg When piet the pore buton Shut down Wher close fe bd A Hbemnae Prompt io password shan A Conger tenes bon starndty or Eratie Ditabie F Low battery alum F Critica battery dorm Alara level o 3 Notihoshon method ad Merisge Acton sher aam ad No schon Aun pogan x Onsbie Sample system power mode settings Q 4 Learning the Basics Powering down the computer NOTE For more information about the Power Saver utility see Power Management on page 151 Starting again after Shut down To start the computer up again press the power button until the on off light changes to blue If you shut down the computer by closing the display panel you can start it again by opening the display panel Using Hibernation Hibernation mode shuts the computer down completely but it first saves the current mode of the computer to the hard disk Since Hibernation mode does not require power to maintain the saved information the system settings are re
102. e specifically 1 28 Enhancing Productivity An overview of using the Internet designed to work with HTTP They make it easier to connect to a particular network address and send and receive information Internet Service Providers To connect a computer directly to the Internet many people and businesses use an Internet Service Provider ISP An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection You can connect to the Internet by using a telephone and modem or through other higher speed communication methods such as Digital Subscriber Lines DSL cable and satellite links Connecting to the Internet To connect to the Internet you need A modem and telephone line or a LAN connection A Web browser An Internet Service Provider ISP account The Microsoft Web browser Internet Explorer is automatically configured on your system so that when you first start it it guides you through signing up for a new ISP account or assists you in setting up your computer to work with your existing ISP Once you have established an ISP account you can connect to the Internet 1 Connect your computer s modem to a telephone line For more information on connecting a modem see Connecting your modem to a telephone line on page 142 E 2 Start your Web browser Have your modem dial the ISP s telephone number and establish a connection wit
103. ed users from accessing certain functions such as Toshiba Hardware Setup This is useful if more than one person uses the computer A single user password supports the instant and power on password functions When setting up the various passwords keep the following in mind The user password can be set up under the supervisor password The supervisor password must be set before the user password or the user password must be deleted and then re entered after the supervisor password is set TECHNICAL NOTE When you delete the supervisor password the user password is also deleted Using an instant password An instant password secures your system with a single keystroke Use this feature when you leave your desk for a few minutes and do not want to turn off the computer To use an instant password press Fn then press F1 This freezes the keyboard and TouchPad and blanks the screen An instant password has no effect on an optional USB mouse or trackball To unlock your system press Enter and the Windows Logon screen will appear Select your user name and enter your password if any Setting a user password To register a password for the power on password functions 1 Click Start the click All Programs 1 58 Toshiba Utilities Setting user passwords 2 Point to TOSHIBA Console then click the resulting TOSHIBA Console selection You may also press the TOSHIBA Console button to the left of the keyboard
104. efault settings when you restart your system Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings You can enable hibernation through this utility To power down the computer using the Hibernation option click Start select Turn off computer When you hold down the Shift key the Standby button changes to Hibernate Hold down the Shift key then select Hibernate The computer saves the state of the system including all open programs and files to the hard disk and then powers down completely Z TECHNICAL NOTE Toshiba recommends that you always have the Hibernation option enabled Hibernation is the function that causes your system to save anything you have in short term memory to the hard disk drive should your battery fail If Hibernation is not enabled and your battery dies you will lose data Setting user passwords Setting a password leaves your computer secure so that nobody can access your files You must enter the password before you can work on your computer Toshiba supports the several types of passwords on your computer An instant password Secures your open programs and files when leaving the computer temporarily A power on password Prevents unauthorized users from starting or restarting the computer Toshiba Utilities 1 5 Setting user passwords A supervisor password Prohibits unauthoriz
105. em disk A system disk is also called a bootable disk or a startup disk Compare non system disk system prompt The symbol in MS DOS generally a drive letter followed by a greater than sign indicating where users are to enter commands TFT display See active matrix display 222 sn U universal serial bus USB A serial bus that supports a data transfer rate of up to 12 Mbps 12 million bits per second USB can connect up to 127 peripheral devices through a single all purpose USB port USB allows hot swapping of peripherals See also bus hot swapping serial upload To send a file to another computer through a modem or network See also download USB See universal serial bus USB utility A computer program designed to perform a narrowly focused operation or solve a specific problem Utilities are often related to computer system management Web See World Wide Web Wi Fi A registered trademark owned by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity and is another term for the communication protocol to permit an Ethernet connection using wireless communication components World Wide Web www The worldwide network of Web sites linked together over the Internet A user of the Web can jump from site to site regardless of the location of the computer hosting the site See also Internet Index Numerics 101 key keyboard 69 A
106. er 4 Expansion Options Your computer is designed to work in the office as well as on the road This chapter explains how to set up the various optional devices so that your notebook can provide all the convenience of a traditional desktop computer Devices for office computing By connecting optional devices such as an external monitor a full size keyboard and a mouse you can work with your notebook as if it were a standard office computer You can connect any of these optional devices Expansion memory modules Standard 101 key keyboard Mouse or trackball Printer PC Cards Some of these devices listed are Toshiba devices others are standard computer components 112 Expansion Options 1 1 3 Using an external keyboard The devices manufactured by Toshiba can be purchased through Toshiba s Web site toshiba com or through the accessories information packaged with your computer Connecting external optional devices You can connect an external monitor through the video out port on the back of your computer Using an external keyboard If you prefer to use a full size keyboard you can attach one to your computer The computer s USB ports supports any USB compatible keyboard Using a mouse If you prefer you can use a mouse instead of the computer s built in pointing device the TouchPad You can use a USB compatible mouse TECHNICAL NOTE With a USB mouse you can choose to have
107. er hot pluggable port such as IEEE 1394 infrared and so on you do not need to use this wizard Click Cancel to close the wizard and then plug the printer s cable into your computer or point the printer toward your computer s infrared port and turn the printer on Windows will automatically install the printer for you To continue click Next Sample Add Printer Wizard dialog box 3 Click Next The Add Printer Wizard asks you to select your printer I TECHNICAL NOTE If your printer is Plug and Play the L Windows XP operating system recognizes it automatically A You can ignore the remainder of this section See your printer manual 4 Ifthe printer you are setting up Is not connected to a network select Local printer attached to this computer Is connected to a network select Network printer or a printer attached to another computer 5 Click Next The Add Printer Wizard looks for a Plug and Play printer If it does not locate one click Next The Add Printer Wizard prompts you for the printer port Expansion Options 1 1 T Using a printer 6 Select the port settings according to the instructions in your printer s documentation and the port to which your printer is connected then click Next The wizard prompts you to select your printer 7 From the list of manufacturers and printers select your printer then click Next The Add Printer Wizard prompts you to enter a friendly
108. et facility Generically it is known as the Web site address System tray The System tray displays icons of tasks or programs that run continuously in the background To learn more about each task position the cursor over the icon for a few moments and a short description of the task appears Typical tasks in the System tray are Current time Power usage mode Mouse properties and speaker volume To activate a specific task double click the appropriate System tray icon Exchanging data with another computer To transfer a large amount of information between computers you can use the Windows XP Briefcase or a specialized synchronization program and the computer s parallel port Transferring files You can transfer files to another computer using your infrared port or with an adapter cable To transfer files through the parallel port you need an optional LapLink compatible parallel cable 1 Connect the cable 2 Load the transfer program on both computers Enhancing Productivity 1 23 Exchanging data with another computer Set any specific options Start the transfer When you have finished transferring files close the programs on both computers Getting help transferring files 1 Click Start then Help and Support 2 Click the Index icon on the toolbar 3 In the dialog box type direct cable connection 4 Follow the online guide instructions Setting up for communications In order to conne
109. etup is the Toshiba configuration management tool available through Windows To access it open the Start menu click Control Panel then Printers and Other Hardware Then click the Toshiba HWSetup icon Toshiba Utilities 1 DD TOSHIBA Console CPU Boot Priority Keyboard LAN General Parallel Printer Display TOSHIBA Hw Setup program allows you to configure your computer Setup BIOS Version 0 81 08 20 2003 Default i Sample TOSHIBA HWSetup window The tabs represent various dialog boxes They are General Allows you to view current BIOS hard disk drive and memory settings gt Sd Parallel Printer Allows you to configure the parallel port default settings Display Allows you to change various default settings for the built in LCD display CPU Allows you to change the dynamic CPU frequency mode gt gt Sd Boot Priority Allows you to change the sequence in which your computer searches the drives for the operating system Sd Keyboard Allows you to configure an external PS 2 keyboard to emulate the Fn function key and access the wake on keyboard function gt Sd LAN Allows you to set networking functions By changing any of the options that appear in the dialog boxes and clicking Apply you can reconfigure that function 1 56 Toshiba Utilities Enabling Hibernation Any options that you change will become d
110. evice type 6 To view the properties double click the device The operating system displays the Device Properties dialog box which provides an array of tabs They include The General tab which provides basic information about the device The Resource tab which lists resources assigned to the monitor DVD ROM multi function drive diskette disk drive and other power using functions gt The Drivers tab which displays the drivers being used by the device A Troubleshooting button is also present Click troubleshooting A Help and Support window for that device appears For more information about Device Manager refer to Windows XP online help lf Something Goes Wrong 1 11 Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device related It is worthwhile checking for these first 1 2 Click Start then click Turn off computer Click Turn Off The operating system shuts down and turns off the computer automatically Remove the memory module Reinstall the memory module following the instructions in Adding memory on page 46 and making sure it is seated properly Check for the error again If the error recurs remove the memory module entirely and check for the error again If removing the memory module eliminates the error the memory module may be faulty If the error recurs without the memory modu
111. from digital to analog and back to digital enabling information to pass back and forth between digital computers and analog telephone lines motherboard The main circuit board in the computer It contains the processor memory and other primary components MS DOS prompt See system prompt multi function drive A DVD drive that can read and write to CD and DVD media multimedia A combination of two or more media such as sound animation and video in a computer program or presentation Musical Instrument Digital Interface See MIDI N network A collection of computers and associated devices that are connected by communications facilities A network allows you to share data and peripheral devices such as printers with other users and to exchange electronic mail wo 019 non interlaced A method of refreshing a computer screen in which each pixel of every line is refreshed as the electron beam scans across and down the screen Compare interlaced non system disk A disk for storing programs and data that cannot be used to start the computer Compare system disk online Available through the computer Online may refer to information being read from your own computer s hard disk such as online documentation or online help or to information coming from another company on a company network or the Internet operating system A set of programs that controls how the computer works Examples
112. g your computer basic operations and ae using optional devices and trouble shooting Sample TOSHIBA Console Security window 4 Select the Supervisor Password icon 5 Click Set 1 60 Toshiba Utilities Using a supervisor password Type your password in the Input box Retype your password in the Input again box Click Set Click OK ANN Deleting a supervisor password To cancel the power on password function 1 Click Start the click All Programs 2 Point to TOSHIBA Console then click the resulting TOSHIBA Console selection You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console The TOSHIBA Console window appears On the left side select Security Select the Supervisor Password icon Select Verify by Password Select the Supervisor Password tab Type the correct password Click Verify Click Delete 10 Select Verify by Password O N A a A U 11 Type the correct password 12 Click Verify Chapter 7 If Something Goes Wrong Some problems you may encounter when using your notebook computer are relatively easy to identify and solve Others may require help from your dealer or the manufacturer of a software program This chapter aims to help you solve many problems by yourself It covers the problems you are most likely to encounter If all else fails contact Toshiba You will find information on Toshiba s support services at the end of this
113. h the ISP s computer Enhancing Productivity 1 29 An overview of using the Internet If you are using your computer at the office then you probably connect to the Internet through your company s network See your network administrator about connecting to the Internet Surfing the Internet Once connected to the Internet the Web browser displays a home page for example your ISP s home page on the Internet or your company s Web site home page To visit a desired Web site type in the Web address The Web address or Uniform Resource Locator URL is a unique identifier for that computer system linked to the Internet Web addresses can also appear within a Web page s text and are known as links Clicking a link automatically transfers your Web browser to that site You can also use a Search Engine a Web site specifically designed to help you look for information Internet features The Internet offers many types of communication tools to help you perform many tasks Internet email gt Sd To send and receive email of your own you need a mailbox on the Web or an email address If you have an account with an ISP you can probably set up an email address at the same time you sign up for the service Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real time one on one or in groups by typing messages which are instantly
114. hen I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button When I close the lid Set this option to Standby to put the computer into Standby mode when you close the display panel 5 Click Apply 6 Click OK NOTE For more information about the Power Saver utility see Power Management on page 151 Starting again from Standby mode To start up the computer from Standby mode press the power button until the on off light changes to blue The computer returns to the screen you were using If you put the computer in Standby mode by closing the display panel you can start it again by opening the display panel Toshiba s online resources Toshiba maintains a number of online sites to which you can connect These sites provide information about Toshiba products give help with technical questions and keep you up to date with future upgrades For more information see Contacting Toshiba on page 186 Chapter 3 Mobile Computing Toshiba s energy saver design Your computer enters a low power standby mode when it is not being used thereby conserving energy and saving money in the process It has a number of other features that enhance its energy efficiency Many of these energy saving features have been set by Toshiba We recommend you leave these features active allowing your computer to operate at its maximum energy efficiency so that you c
115. herever you go Satellite M30 M35 Series computers provide considerable computing power enabling you to perform the most demanding computing tasks from any location You will find your operating system Microsoft Windows XP Home or Windows XP Professional already installed on your computer Your operating system offers exciting features and easy Internet access NOTE While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein product specifications configurations prices system component options availability are all subject to change without notice For the most up to date product information about your computer or to stay current with the various computer software or hardware options visit Toshiba s Web site at pcsupport toshiba com 33 3 4 Introduction This guide This guide This guide introduces the computer s features You can Read the entire guide from beginning to end Skim through and stop when a topic interests you Use the table of contents and the index to find specific information Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data These safety cautions have been classified according to the seriousness of the risk and the icons highlight these instructions as follows Indicates a
116. hoose from Turn Off Computer Standby and Hibernation TECHNICAL NOTE Before using any of these options to power down your computer save your files and make sure the disk activity lights are off Z If you change your mind and decide to continue working after all wait a few seconds before turning the computer on again 902 Learning the Basics Powering down the computer Using Turn Off Computer or Shut Down For the Windows XP Home operating system follow these steps to shut down the computer 1 Click Start select Turn off computer The Turn off computer dialog box appears Turn off computer m a TP Stand By Restart Sample Turn off computer Windows dialog box 2 Click Turn Off The computer shuts down completely For the Windows XP Professional operating system follow these steps to shut down the computer 1 Click the Start button then Shut down The Shut Down Windows dialog box appears 2 Select Shut down from the drop down list 3 Click OK The computer shuts down completely NOTE Holding the shift key while the Turn Off computer Windows dialog box is open changes the Stand By button to hibernate For more information about setting up hibernation refer to Using Hibernation on page 94 Learning the Basics 93 Powering down the computer Shutting down more quickly In addition you can shut down the computer by pressing the power button To use either of thes
117. iba cecce 186 Other Toshiba Internet Web sites 0 187 Toshiba s worldwide offices cees 187 Appendix A Hot K yS ccccccnecsccennnnn 191 Volume Mute oon cece cc ccccceeeessssssseeeeesessssseeeens 191 Instant password security accses 192 Power usage profile cee eeeeeeeesseeeeeeens 192 Stand BY mode scccccceeeereereerereenn 193 Hibernation mode asscssccserecreerern 194 Display modes ccecce 195 Display brightness occcccccccccccccrirerrrn 195 Disabling or enabling the TouchPad 0 196 Keyboard hot K YS usossssisscersrresererrrrenerrernnen 196 Appendix B Power Cable Connectors 6 197 Appendix C Using ConfigFree with your Toshiba Computer ou 198 Getting Started cectossesteeuenesenteceeetsineseteen tt 199 ContfigFree Main Screen eee eee 199 Starting ConfigFree ccce 200 Configuring ConfigFree o oo eee eee 200 ContfigFree Utilities oo cece eeceeeseeeeeeees 201 Connectivity Doctor ccecce 201 Device Settings ccce 202 Profile Settings ocne 204 Quick Connect seeren 205 Using Auto Switch assccsccccecccererrerren 206 Auto Switch Cable Disconnect 0 207 Auto Switch SSID snsaseccsscasasmesansussssvgnauacnyin 207 32 Contents GIOSSALY eee ccec cee cceceseesecseeesesseseeeessesseeeeeseeeneeens Index Introduction Welcome to the world of powerful portable multimedia computing With your Toshiba notebook computer your work can accompany you w
118. icio Europa la Planta Escalera A 28831 Madrid San Fernando de Henares Spain If Something Goes Wrong Toshiba s worldwide offices 189 Norway Scribona Norge A S Toshiba PC Service Stalfjaera 20 PO Box 51 Kalbakken 0901 OSLO 9 Norway Poland TECHMEX S A ul Partyzant w 71 43 316 Bielsko Biala 01 059 Warszawa Poland Singapore Toshiba Singapore Pte Ltd 438B Alexandra Rd 06 01 Alexandra Technopark Singapore 119968 Slovenia Inea d o o Ljubljanska 80 61230 Domzale Slovenia Sweden Scribona PC AB Sundbybergsv egen 1 Box 1374 171 27 Solna Sweden 190 If Something Goes Wrong Toshiba s worldwide offices Switzerland Ozalid AG Herostrasse 7 8048 Z rich Switzerland United States Toshiba America Information Systems Inc 9740 Irvine Boulevard Irvine California 92618 United States United Kingdom Toshiba Information Systems U K Ltd Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe I E GmbH Hammfelddamm 8 D 4 1460 Neuss Germany Appendix A Hot Keys Hot keys are keys that when pressed in combination with the Fn key turn system functions on and off Hot keys have a legend on or above the key indicating the option or feature the key controls Volume Mute Fn ora This hot key enables disables volume mute on your computer When volume mute is enabled no so
119. iders 128 IRQ Interrupt Request 168 ISPs 128 J jack RJ 11 143 K keeping comfortable 38 key assign 148 changing 150 direct assign 148 popup 149 removing 150 key assignment viewing existing 149 key assignments changing or removing existing 150 keyboard character keys 69 function keys 70 hot keys 196 not working 163 173 overlay keys 71 unexpected characters 173 Windows special keys 71 keyboard external 63 keyboard full size 69 keyboard PS 2 compatible 63 L LCD power saver 58 lighting 40 memory adding 46 expansion slots 47 207 problem solving 171 removing expansion slot cover 48 memory module inserting 49 installation 47 removing 51 microphone 133 external connecting 66 Microsoft Support Online Web site 167 modem connecting to a telephone line 142 determining COM port 123 problem solving 183 resetting port to default settings 123 upgrading 123 modules Wi Fi Mini PC 118 monitor 58 connecting 59 61 external connecting 113 not working 174 mouse installing 63 serial 63 using 113 network 151 accessing 125 Dial Up Networking Wizard 125 networking wireless 125 0 office computing 112 opening the display panel 52 optional devices 112 LapLink cable 122 other documentation 35 overlay keys 71 p password deleting a supervisor 160 disabling a user 158 supervisor set up 159 passwords instant using 157 setting user 156 PC Card checklist 180 CIS Card Information
120. ing 59 video projector adjusting display 62 volume mute hot key 191 W warranty SelectServ 36 Web sites 186 Support Online 167 Web sites Toshiba 187 Wi Fi wireless networking 125 Wi Fi Mini PCI modules 118 Wi Fi modules inserting and removing 140 Windows Explorer 74 Windows Media Player 130 Windows Millennium Edition Help 167 Windows Start menu 73 Windows XP Help 166 Help and Support 166 problem solving 164 Windows XP Professional Briefcase 122 Windows XP Professional taskbar 122 Windows XP Professional desktop 119 wireless interoperability 7 wireless networking 125 Wizards Dial Up Networking Wizard 125 work habits 41
121. ing new icon 120 major features 119 desktop exploration 119 desktop icons 120 Device Manager 169 checking properties 170 disabling a device 169 170 devices keyboard 63 mouse 63 Disk Defragmenter 176 disk drive corrupted damaged data files 177 missing files trouble accessing a disk 176 running slow 176 diskette drive can not insert a diskette 177 can t read a diskette 177 connecting 65 external connecting 65 display does not look normal flickers 174 external monitor not working 175 screen is blank 173 display device connecting 59 external 58 video 58 display modes hot key 195 display output settings 61 display panel closing 58 display external adjusting 62 disposal information 24 x 225 disposing of used batteries 109 DMA Direct Memory Access 168 double click 54 DVD ROM drive problems 178 troubleshooting 170 DVD ROM or multi function drive can t access disc 178 opening 83 DVD ROM multi function drive drive tray will not open 178 problems 178 troubleshooting 170 E ergonomics 40 error Messages device driver conflict 167 general hardware problem 167 non system disk or disk error 164 177 problem with display settings current settings not working with hardware 175 program has performed an illegal operation 162 warning resume failure 164 Error checking 176 Ethernet LAN port 125 expansion memory slot 48 exploring the desktop 119 external mouse 63 external diskette drive connecting 65 external
122. inutes Sample Toshiba Power Saver Properties Dialog Box 105 Apply The remaining battery charge is indicated on the top left side of the dialog box With repeated discharges and recharges the battery s capacity will gradually decrease A frequently used older battery will not power the computer for as long as a new battery even when both are fully charged HINT Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power The computer needs this time to check the battery s remaining capacity and perform its calculations 1 0 Mobile Computing What to do when the battery alarm sounds A The computer drains battery power more quickly at low L temperatures Check your remaining charge frequently if f you re working in temperatures below 50 degrees Fahrenheit The Windows operating system has additional power management options that can be accessed through an icon in the Control Panel For more information see Power Management on page 151 What to do when the battery alarm sounds Your Satellite M30 M35 Series computer can be configured to warn you of a low battery charge condition so you may take the necessary steps to save your work Your Windows operating system offers two alarms before your system shuts down To change the default alarm settings 1 Open the Start menu click Control Panel then Performance and Maintenance 2 Clic
123. ion drive tray does not eject 178 external display not working 175 external keyboard not working 173 external monitor 174 faulty memory 171 hardware conflict 167 168 high pitched noise 179 illegal operation 162 Internet bookmarked site not found 166 Internet connection is slow 166 keyboard not responding 163 keyboard produces unexpected characters 173 missing files trouble accessing a disk 176 modem not receiving or transmitting 183 no sound 178 non system disk or disk error 164 177 PC Card 179 checklist 180 error occurs 181 hot swapping fails 181 not recognized 181 slots appear dead 180 power and batteries 171 printer 182 program not responding 161 program not working properly 290 177 screen does not look right flickers 174 system resources 168 trouble prevention 183 URL address not found 166 using Startup options 165 warning resume failure 164 Windows won t start 163 Windows XP not working 164 program starting 73 programs not running correctly 177 projector 58 connecting 61 protection of stored data 2 R real time clock RTC battery 100 recording wav files 132 sounds 132 recording quality 134 recording sounds 132 recycle bin icon 120 RJ 11 jack 143 Run dialog box 75 S safety disposing of batteries 109 icons 34 saving files 76 screen blank 173 does not look normal flickers 174 SD card inserting 140 removing 141 SD cards 140 seating 39 secondary button 54 security 151 selecting
124. ish to change with the secondary button Fn esse displays the Assignment Type dialog box To change the key assignment click Direct or Popup and continue as if you were creating a new assignment To remove the key assignment click Clear TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings To access the control panel 1 Click Start then click All Programs 2 Point to TOSHIBA Console then click the resulting Toshiba Console selection or press the inTouch button The TOSHIBA Console window appears TOSHIBA Donhigr rss Haidean Sample TOSHIBA Console window Toshiba Utilities 1 D TOSHIBA Console The TOSHIBA Console offers three categories of features Customizing Your Computer Network Security Customizing Your Computer The features available in this category are Power Management Mouse Hotkey assignment for detailed information see Fn esse on page 146 Toshiba Hardware Settings Toshiba Button Control ConfigFree Network The features in this category are IR Utility Connectivity Doctor security The features available in this category are Supervisor password o User password Power Management The Power Management feature enables you to control your computer s power usage regardless of the source an
125. istered profile Auto Switch The Auto Switch button accesses the Auto Switch feature For more information see Using Auto Switch on page 206 Internet Options The Internet Options button opens the Microsoft Windows Internet Options dialog box See your Microsoft Windows documentation for more information Using ConfigFree with your Toshiba Computer 205 ConfigFree Utilities Add Modify and Delete a Profile To add anew profile to ConfigFree click the Add button in the Profile Settings screen To overwrite an existing profile select the profile to be overwritten and then click Add To modify an existing profile select the profile you want to modify and then click Modify To delete an existing profile select the profile to be deleted and then click Delete A message box displays confirming that you want to delete the profile Switch Profiles To switch the profile that is being used select the profile you want to switch to and then click Switch Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to the Toshiba Wireless Projector As aresult you will not be able to use the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc If you are connected to an access point the connection will be broken and later re established If the Toshiba Wireless Projector setting has been changed from the
126. k the Toshiba Power Saver icon 3 Click the Setup Action tab 4 Select the Alarm settings in the Setup Alarm section Before your computer runs out of battery power save your data and take one of the following actions Suspend or shut down your computer Shut down your computer and replace the main battery with a charged one Connect your computer to an AC power source Mobile Computing 1 0 Changing batteries Changing batteries CAUTION Whenhandling battery packs do not drop or knock them Also be careful not to damage the casing or short circuit the terminals To change the battery 1 nan Ae U N N Save your work Shut down and turn off the computer Remove all cables connected to the computer Turn the computer over If the battery lock is in the locked position slide it toward the unlocked position Slide the battery release latch to release the battery Battery release latch 7 Pull the discharged battery out from the back of the computer 1 0 Mobile Computing Changing batteries ON 2 Qn o Vo O_O U Removing the discharged battery WARNING l the battery is leaking or its case is cracked put on protective gloves to handle it and discard it immediately following the advice in Disposing of used batteries on page 109 8 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection 9 Insert the charged b
127. kette drive Your computer normally loads the operating system from the hard disk If you have a hard disk problem you will not be able to start the computer Insert a system diskette into the external diskette drive and press F12 when the machine starts and then use the arrow keys to select the boot up device 1 O 4 lf Something Goes Wrong The Windows operating system is not working The computer displays the WARNING RESUME FAILURE message The computer was placed in Stand By mode and the battery has discharged Data stored in the computer s memory has been lost To charge the battery leave the computer plugged into a live wall outlet for several hours For more information see Power and the batteries on page 171 The computer displays the Non System disk or disk error message Make sure there is no diskette in the diskette drive If there is one remove it and press any key to continue If pressing any key does not work press Cirl Alt and Del to restart the computer The Windows operating system is not working Once you are familiar with the desktop and used to the way the operating system responds to your work routine you can easily detect if the operating system is not working correctly For example The operating system fails to start after the Starting Windows XP message appears The operating system takes a long time to start The operating system responds differently from the normal ro
128. label side uppermost Press the disc down until it locks on the spindle Close the drive tray carefully making sure it has shut completely You press the disc eject button but the drive tray does not slide out Make sure the computer is connected to a power source and turned on The DVD ROM or multi function drive eject mechanism requires power to operate To remove a disc without turning on the computer use a narrow object such as a straightened paper clip to press the manual eject button This button is in the small hole next to the disc eject button on the right side of the computer Some discs run correctly but others do not If the problem is with an application CD ROM refer to the software s documentation and check that the hardware configuration meets the program s needs Sound system problems You do not hear any sound from the computer Adjust the volume control lf Something Goes Wrong 1 19 Resolving a hardware conflict If you are using external headphones or speakers check that they are securely connected to your computer The computer emits a loud high pitched noise This is feedback between the microphone and the speakers It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud Adjust the volume control Changing the settings for the Record Monitor feature in the Recording Control Utility default Off or the Mute feature in the
129. le installed the error is not caused by the memory module Z TECHICAL NOTE You must have a least one memory module installed for the computer to work Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries main battery and real time clock RTC battery Power problems are interrelated For example a faulty AC adapter or power cable will neither power the computer nor recharge the batteries Here are some typical problems and how to solve them 1 12 lf Something Goes Wrong Resolving a hardware conflict The AC power light does not come on when you plug in the AC adapter and power cable Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer If the AC power light still does not come on check that the wall outlet is working properly by plugging in a lamp or other appliance The AC adapter and power cable work correctly but the battery will not charge The battery does not charge while the computer is consuming full power Try turning off the computer The main battery may not be inserted correctly in the computer Turn off the computer remove the battery clean the contacts with a soft dry cloth if necessary and replace the battery The battery may be too hot or too cold to charge properly If you think this is the probable cause let the battery reach room temperature and try again
130. lectromagnetic energy emitted by wireless devices like for example mobile phones Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless LAN is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include Using the Wireless LAN equipment on board of airplanes or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer s instructions as described in the user documentation that comes with the product This device complies with the following radio frequency and safety standards Canada Industry Canad
131. lick a problem you would like help with from the listings and follow the on screen instructions You can connect to Support Online by clicking Support from the menu Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem try using Windows Help and Support to troubleshoot the problem first For help on hardware conflicts 1 Click Start then click Help and Support 2 Click the Hardware link in the window s left pane A list of category links appear 3 Click the Fixing a hardware problem 4 Choose from specific topics and follow the steps If there is still a problem the operating system should display a message that explains what the conflict is A plan of action The smooth operation of the system depends on the interaction of all devices programs and features If the system or one of its attached devices is not working resolving the problem can be time consuming and frustrating The recommended procedure for getting multiple devices to work together is to add and set up one device at a time After 1 68 lf Something Goes Wrong Resolving a hardware conflict you add each device test it to make sure it and all previously connected devices work The device most recently connected to the system is the one most likely to be causing a hardware conflict Resolving hardware conflicts on your own Computer components need resources
132. lize a l interieur et devrait etre place loin 9 des fenetres afin de Fournier un ecram de blindage maximal Si le matriel ou son antenne d emission est installe a l exterieur il doit faire l objet d une licence Europe EU Declaration of Conformity This device complies with the essential requirements of the R amp TTE Directive 1999 5 EC with essential test suites as per standards EN 60950 Safety of Information Technology equipment ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment Belgi For outdoor usage only channel 10 2457 MHz and 11 2462 MHz is Belgique allowed For private usage outside buildings across public grounds over less than 300m no special registration with IBPT BIPT is required Registration to IBPT BIPT is required for private usage outside buildings across public grounds over more than 300m An IBPT BIPT license is required for public usage outside building For registration and license please contact IBPT BIPT Gebruik buiten gebouw alleen op kanalen 10 2457 MHz en 11 2462 MHz Voor priv gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT IBPT nodig voor gebruik over afstand groter dan 300m is wel registratie bij BIPT IBPT nodig Voor publiek gebruik buiten gebouwen is licentie van BIPT IBPT verplicht Voor registratie of licentie kunt u contact opnemen met BIPT L utilisation en
133. manner that human contact during normal operation is minimized NOTE Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user s authority to operate the equipment Taiwan Article 14 Unless approved for any model accredited low power radio frequency electric machinery any company trader or user shall not change the frequency increase the power or change the features and functions of the original design Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications In event that any interference is found the use of such electric machinery shall be stopped immediately and reusing of such products can be resumed until no interference occurs after improvement 20 The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial scientific and medical radio emission electric machinery Using this equipment in Japan In Japan the frequency bandwidth of 2 400 MHz to 2 483 5 MHz for second generation low power data communication systems such as this equipment overlaps that of mobile object identification systems premises radio station and specified low power r
134. mmunications to receive a file from another computer through a modem or network 2 To send font data from the computer to a printer See also upload drag To hold down the AccuPoint control button or mouse button while moving the cursor to drag a selected object In the Windows operating system this refers to the primary AccuPoint control button or left mouse button unless otherwise stated driver See device driver w 215 DVD An individual digital versatile or video disc See also DVD ROM DVD ROM digital versatile or video disc read only memory A very high capacity storage medium that uses laser optics for reading data Each DVD ROM can hold as much data as several CD ROMs Compare CD ROM emulation A technique in which a device or program imitates another device or program enable To turn on a computer option See also disable executable file A computer program that is ready to run Application programs and batch files are examples of executable files Names of executable files usually end with a bat or exe extension expansion device A device that connects to a computer to expand its capabilities Other names for an expansion device are port expander port replicator docking station or network adapter extension See file extension external device See device file A collection of related information saved on disk with a unique name A file may be a program inf
135. mputer has recognized the additional memory If you are adding extra memory after setting up the computer verify that the computer has recognized it correctly as described in Checking total memory on page 51 Removing a memory module If you need to remove a memory module 1 Complete steps 1 6 in Installing a memory module to shut down the computer and open the memory module cover CAUTION Do nottry to remove a memory module with the computer turned on You can damage the computer and the device Do not remove the memory module while the computer is in standby mode The computer could hang up the next time you turn it on and data in memory will be lost In either of the above cases the Standby configuration will not be saved The following message appears when you turn on the power Warning Resume Failure Press Any Key To Continue lf the computer hangs up when you turn it on perform the following Press the power button and hold it down for five seconds then turn the power on again Getting Started D Adding memory 2 Pull the clips away from the memory module The memory module pops partially out of the slot 3 Carefully remove the module from the slot Removing the memory module 4 Replace the cover plate and screws 5 Turn the computer over and restart it Checking total memory When you add or remove memory you can check that the computer has recognized the change To do this
136. n a cable for connection to a network or a peripheral device processor See central processing unit CPU program A set of instructions that can be executed by a computer The general classes of programs also called software are operating system application and utility See also operating system application utility properties The attributes of an object or device For example the properties of a file include the file s type size and creation date R RAM random access memory Volatile memory that can be written to as well as read By volatile we mean that information in RAM is lost when you turn off your computer This type of memory is used for your computer s main memory See also memory Compare ROM random access memory See RAM read only memory See ROM reboot See boot restart removable disk A disk that can be removed from a disk drive A diskette is one example of a removable disk resolution A measure of the sharpness of the images that can be produced by a printer or displayed on a screen For a printer resolution is expressed in dots per inch dpi For a screen it is expressed as the number of pixels available horizontally and vertically restart Synonymous with reboot To reset the computer by reloading the operating system without turning the computer off See also boot RJ 11 A modular connector used on most U S telephone systems and direct connect modem
137. n imminently hazardous situation which if not avoided will result in death or serious injury AWARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Indicates a potentially hazardous situation which if not avoided may result in property damage Introduction 3 Other documentation O17 NOTE Provides important information Other icons used Va er ar S DEFINITION This icon indicates the definition of a term used in the text A Other documentation Your computer comes with the following documentation Additional icons highlight other helpful or educational information TECHNICAL NOTE This icon indicates technical information about the computer HINT This icon indicates helpful hints and tips This electronic version of the user s guide Look for the user s guide icon on your desktop or in the DOCS folder on the C drive Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media For accessory information visit Toshiba s Web site at toshiba com 36 Introduction Service options o The Microsoft Windows operating system documentation which explains the features
138. nally experience a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off either one of your Bluetooth or Wireless LAN Please contact Toshiba PC product support on Web site http www toshiba europe com computers tnt bluetooth htm in Europe or http www pcsupport global toshiba com in the United States for more information Bluetooth wireless technology and your Health The products with Bluetooth wireless technology like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by devices with Bluetooth wireless technology however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Bluetooth wireless technology is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include Using the e
139. ng user passwords n 156 Using an instant password ccecce 157 Setting a user password ou cece sees sees 157 Disabling a user password ccce 158 Using a supervisor password uo cece cece 159 Setting a supervisor password cess 159 Deleting a supervisor password essc 160 Chapter 7 If Something Goes Wrong cecs 161 Problems that are easy to fiX ccccccccccn 161 Problems when you turn on the computer 163 The Windows operating system is not working 164 Using Startup options to fix problems 165 Internet problems cscs 166 The Windows XP operating system can MOOV OU o A T 166 Resolving a hardware conflict eee 167 A plan of action atone deaaqacecstensdcomszzatssovnceaieneonens 167 Resolving hardware conflicts on your own 168 Fixing a problem with Device Manager 169 Memory problems ccecceeceeeeeeeeeteeeeens 171 Power and the batteries n 171 Keyboard problems cceeesseeeseesseeeeeeens 173 DiSpiay DFODIGINS sccvetewwsrceatensievientcentsientcetead 173 Disk drive problems eee eeeeeeeseeeeeeen 175 DVD ROM or multi function drive problems 178 Sound system problems ou cece 178 PC Card problems ccecce 179 Printer problems cc cc cccccesssceeseesseeeeeseens 182 Modem problems scce 183 Contents 37 Develop good computing habits 183 If you need further assistance ccceeeeeeseeeee 185 Before you Call luacs 185 Contacting Tosh
140. nhancing Productivity 1 21 Exploring the desktop Internet Explorer The Microsoft browser that provides access to the Internet NOTE If you place the cursor over an icon a popup description of the file contents appears Your desktop may contain other icons depending on your configuration See Windows XP online help for more specific information on each icon and how to use it Start button You use the Start button to Start programs e gt Sd Access Microsoft Windows XP operating system update information Open documents Adjust system settings Find files gt gt Access Windows Help gt Run programs Suspend system activity and shut down the computer Taskbar Each time you open a program a button associated with that program appears on the taskbar With some programs a button appears on the taskbar for each document or window you open You can use these buttons to quickly switch between the programs or windows To make a program or window the currently active one click the associated taskbar button 1 2 2 Enhancing Productivity Exchanging data with another computer You can personalize the taskbar to include not only shortcut icons but also your favorite Internet URL addresses DEFINITION URL stands for Uniform Resource Locator which is the address that defines the route to a file on the Web or any other Intern
141. nnect the device 1 Connect one end of the video cable to the external video device Refer to the documentation provided with the device for the location of its video in port Connect the other end of the video cable to the video out port on the left side of the computer n Turn on the external video device Set the display mode by pressing Fn F5 or by setting the Display Properties settings For more information see Directing the display output when you turn on the computer on page 61 TECHNICAL NOTE If you are connecting to a television you may need to change the display properties Most televisions use or support an 800 x 600 standard resolution Getting Started 61 Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen To do this C 1 Connect the monitor s video cable to the RGB monitor port on the back of the computer Connect the device s power cable to a live electrical outlet Turn on the external device Set the display mode by pressing Fn F5 or by setting the Display Properties settings Directing the display output when you turn on the computer Once you ve connected an external display device you can choose to use the internal display only the external device only or both simultaneously The quickest way to change the display output settings i
142. nnecting to a wall jack CAUTION Ihe modem is designed for use with a standard analog telephone line Do not connect the modem to a digital telephone line A digital line will damage the modem 1 4 4 Enhancing Productivity Connecting your modem to a telephone line Now you re ready to send a fax or use the modem to connect to an online service or the Internet For more information on using a modem see Setting up for communications on page 123 Chapter 6 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs Together these allow you to determine certain system details set additional options or change default options This chapter describes the utilities supplied by Toshiba Fn esse Hotkey utility TOSHIBA Console Toshiba Hardware Settings Power Management Enabling Hibernation Setting a user password Using a supervisor password 145 1 46 Toshiba Utilities Fn esse Fn essee Desktop shortcuts and Toshiba s Fn esse program provide quick ways to open programs documents and folders from within any Windows program without using the Start menu For more information on creating desktop shortcuts refer to the operating system documentation that came with your computer This section describes how to use the Fn esse program to quickly access your programs and files With Fn esse
143. nning a program consult the program s documentation for troubleshooting suggestions Contact the software company s technical support group for their assistance Consult the dealer from whom you purchased your computer and or program Your dealer is your best source for current information Detailed system specifications are available at www ts toshiba com by selecting your particular product and model number clicking GO and then clicking the Detailed Specs link from the menu on the left or just refer to the computer documentation shipped with your product For the number of a Toshiba dealer near you in the United States call 800 457 7777 1 86 lf Something Goes Wrong If you need further assistance Contacting Toshiba If you still need help and suspect that the problem is hardware related Toshiba offers a variety of resources to help you To stay current on the most recent software and hardware options for your computer and for other product information be sure to regularly check the Toshiba Web site at pcsupport toshiba com Toshiba voice contact Before calling Toshiba make sure you have Your computer s serial number The computer and any optional devices related to the problem The Recovery media that came with your system Name and version of the program involved in the problem along with its installation media Information about what you were doing when the problem occurred
144. o display device such as a video projection unit via the video out port An external monitor or projector via the RGB monitor port A video display device via the S Video port Before connecting a television video projector monitor or other display device configure your computer for the type of device you re connecting To do this refer to the documentation for your operating system and devices Connecting the display device If you re connecting a television or other video display device to the computer s video out port first refer to Selecting video cables on page 59 below for guidelines on choosing a video cable then refer to Connecting to the video out port below If you re connecting an SVGA monitor skip to Connecting an external monitor or projector on page 61 Selecting video cables To connect a device to the S video port you Il need to purchase a cable For the best video quality always use a properly shielded cable HINT Toshiba recommends using a cable no longer than 20 feet approximately 6 meters 60 Getting Started Using external display devices Using a poor quality cable may result in a dull or fuzzy picture poor color ghosting video noise or loss of video Connecting to the video out port NOTE Video cables are not included with your computer To connect a device to the video out port you will need to purchase an S video cable To co
145. o scroll as you would with any wheel device on a mouse or trackball To scroll vertically run your finger up or down along the right edge of the TouchPad To scroll horizontally run your finger along the bottom edge of the TouchPad Control buttons When a step instructs you to click or choose an item move the cursor to the item then press and release the primary left hand button To double click press the primary button twice in rapid succession The primary button usually corresponds to the left mouse button The function of the secondary right hand button depends on the program you are using It usually corresponds to the right mouse button Check your program s documentation to find whether it uses the right mouse button Getting Started DH Using the TouchPad Disabling or enabling the TouchPad The TouchPad is enabled by default To change the enable disable TouchPad setting 1 Click Start Control Panel The Control Panel window appears Click Printers and Other Hardware Click the Mouse icon Click the TouchPAD ON OFF tab The TouchPAD ON OFF tab view window appears Mouse Properties JE Buttons Pointers Pointer Options Hardware Device Settings m TouchPAD ON OFF TouchPAD ON OFF Current TouchPAD Status Setting Change O Disable Select Disable or Enable whichever is appropriate Click Apply Click OK The Mouse Properties window closes Close the Printers and
146. of operating systems are Windows XP and Windows 2000 palette See color palette parallel Processes that occur simultaneously In communications it means the transmission of more than one bit of information at a time On your computer the parallel port provides a parallel communications interface between the computer and an appropriate device Most modern printers are parallel Compare serial password A unique string of characters entered by a user to verify his or her identity to the computer or the network PC Card A credit card sized expansion card designed to increase the capabilities of notebook computers PC Cards provide functions such as modem fax modem hard disk drive network adapter sound card or SCSI adapter peripheral Any device such as a printer or joystick that is attached to the computer and controlled by the computer s CPU pixel Short for picture element The smallest dot that can be produced on a screen or printer Plug and Play Generally refers to the computer s ability to automatically configure itself to work with peripheral devices When capitalized refers to a standard that when followed by a device manufacturer allows a PC to configure itself automatically to work with the device 220 om pointing device Any device such as the AccuPoint or a mouse that enables you to move the cursor on the screen port A socket on the computer where you plug i
147. oint to All Programs 14 Learning the Basics Starting a program The Windows XP operating system displays the All Programs menu which lists programs and program groups If your program is listed go to Step 3 otherwise continue with Step 2 Point to the program group in this example Accessories The Accessories menu is displayed Click the program in this example WordPad WordPad opens 4 To close the program click the Close button in the upper right corner of the program s window Starting a program from Windows Explorer If a program is not listed in the Programs menu you can start it from Windows Explorer Windows Explorer gives you a view of your computer s contents as a hierarchy or tree You can easily see the content of each drive and folder on your computer To use this method you should know the file name and location of the program s executable file this file ends with exe This example opens WordPad using its file name wordpad exe 1 nan AeA UO N Click Start then point to All Programs Click Accessories Click Windows Explorer Click My Computer to expand it In the left part of the window under the C icon double click the folder containing the program in this case Program Files Windows Explorer shows the contents of the Program Files folder on the right side of the window The left side of the Learning the Basics 15 Starting a program windo
148. oller m O11 alternating current AC The type of power usually supplied to residential and commercial wall outlets AC reverses its direction at regular intervals Compare direct current DC application A computer program that you use to perform tasks of a specific type Applications include word processors spreadsheets and database management systems See also program backup A copy of a file usually on a removable disk kept in case the original file is lost or damaged basic input output system BIOS See BIOS baud rate The speed at which a communication device such as a printer or modem transmits information Baud rate is the number of signal changes per second not necessarily the same as bits per second See also bits per second BIOS basic input output system Basic instructions stored in read only memory ROM containing the information the computer needs in order to check hardware and load the operating system when you start up the computer bit Short for binary digit A bit is the smallest unit of information used by a computer A group of eight bits is a byte See also byte bits per second bps A way of measuring the speed at which information is passed between two devices The basic measure used in modem communications bps is similar but not identical to the baud rate See also baud rate boot To start the computer The term boot originates from boot
149. omputer is running and have the operating system automatically recognize the change icon A small image displayed on the screen that represents a function file or program interlaced A method of refreshing a computer screen in which only every other line of pixels is refreshed Interlaced monitors take two passes to create a complete screen image Compare non interlaced internal device See device Internet The decentralized world wide network of computers that provides electronic mail the World Wide Web and other services See also World Wide Web keyboard shortcut A key or combination of keys that you use to perform a task instead of using a pointing device such as the AccuPoint kilobyte KB A unit of data equal to 1024 bytes See also byte L1 level one cache Memory cache built into the processor to help improve processing speed See also cache CPU cache L2 cache L2 level two cache Memory cache installed on the motherboard to help improve processing speed It is slower than L1 cache and faster than main memory See also cache CPU cache LI cache LAN local area network A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network liquid crystal display LCD A type of display that uses a liquid substance between two transparent electrode panels When
150. on Command Line and Working Directory for the new Fn esse key assignment or click Browse to specify this information 3 Click OK Toshiba Utilities QO Fn esse 1 4 Making a popup assignment 1 Select Popup to display the Application Explorer dialog box 2 Select the desired folder The left side of the Application Explorer window displays the folders in the Programs menu The right side lists the programs and documents in the folder These are the items that will appear in the popup list 3 To create a popup list with items from various folders or to pick only a few items from a folder create a new folder containing only the desired programs and documents If you are unsure how to do this refer to your Windows XP operating system documentation 4 Click OK to associate the folder with the key you just selected To open a popup list showing the items in that folder press Fn plus the appropriate key from within any Windows program Viewing existing key assignments To view the existing key assignments choose Assignments from the Fn esse keyboard Fn esse displays the Function Key Assignments dialog box This box lists all the key assignments and the program or document to which each key is assigned To view items in a popup list select the Expand popup lists check box 1 50 Toshiba Utilities TOSHIBA Console Changing or removing existing key assignments In the Fn esse keyboard click the key you w
151. on The drive will allow you to change regions four times On the fourth change the region will be locked in That is the drive will only play DVDs from that last region Note that changing from region 1 to region 2 and back to region 1 is counted as two changes elise Drive in use indicator light Eject button Manual eject hole Sample DVD ROM drive shown Drive in use indicator light Indicates when the drive is in use Eject button Press to release the disc tray CAUTION Do not press the eject button or turn off the computer while the Drive in use indicator light is glowing Doing so could damage the disc or the drive When the disc tray is open be careful not to touch the lens or the area around it Doing so could cause the drive to malfunction Manual eject hole Use if you need to release the disc tray when the power is off Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole Learning the Basics ST Using the DVD ROM or multi function drive CAUTION Never use a pencil to press the eject button Pencil lead can break off inside the computer and damage it CD DVD control buttons The control buttons on the front edge of the computer let you play audio CDs when the computer is off You can also use them to play CDs and DVDs when the computer is on MODE KK gt gt Mode Previous Next Play Pause Stop
152. on now 2 Open the File menu of your Windows program and click Print The program displays a Print dialog box Learning the Basics 19 Using the DVD ROM or multi function drive General Options Select Printer BO Bs amp Add Printer Fax Printer Status Ready _ Print to file Location Comment Find Printer Page Range all Number of copies 1 Pages 1 j Ssa Sa lz 3 AN Enter either a single page number or a single 1 2 page range For example 5 1 A sample Print dialog box 3 Specify the print parameters For example the range of pages and number of copies to print 4 Click Print Using the DVD ROM or multi function drive Optical storage has become the preferred medium for software music and video Digital versatile discs DVDs provide a significant increase in data storage and support features that are not available on any other video platform These features include wide screen movies multiple language tracks digital surround sound multiple camera angles and interactive menus For these reasons your computer may come with a DVD ROM drive or multi function drive 80 Learning the Basics Using the DVD ROM or multi function drive I TECHNICAL NOTE Your DVD ROM or multi function drive is L set to play region 1 North America DVD ROMSs If you play a Y DVD disc from another region the drive will automatically change to play in the format of the other regi
153. ong periods Intersperse such activities with other tasks gt Focusing your eyes on your computer screen for long periods can cause eyestrain Look away from the computer frequently and focus your eyes on a distant object for at least 30 seconds Other precautions Your computer is designed to optimize safety minimize strain and withstand the rigors of portability However you should observe certain precautions to further reduce the risk of personal injury or damage to the computer CAUTION Do not apply heavy pressure to the computer or subject it to sharp impacts Excessive pressure or impact can damage computer components or cause your computer to malfunction 42 Getting Started Setting up your computer CAUTION S0me PC Cards can become hot with prolonged use If two cards are installed both can become hot even if only one is used extensively Overheating of a PC Card can result in errors or instability in the PC Card operation Be careful when you remove a PC Card that has been used for lengthy periods of time Setting up your computer WR TECHNICAL NOTE You must complete all set up steps up to Setting up your software on page 56 before adding external f or internal components to your computer These components include but are not limited to a mouse keyboard printer memory and PC cards Your computer comes with a rechargeable battery pack that must be charged
154. or select your own combination of power management options To do this 1 Open the Start menu click Control Panel then Performance and Maintenance Click on the Toshiba Power Saver icon Select an appropriate profile for your work environment or create your own custom profile 4 For more information see Power Management on page 151 Mobile Computing 1 1 1 Additional options for power Using a hot key to set the power profile You may use a hot key to set the power profile To set the power profile 1 Press Fn and F2 simultaneously to display the power profile pop up window Full Power Sample Power Profile mode pop up window 2 While continuing to press Fn press F2 until you select the desired power profile The power profile options are Full Power High Power Normal DVD Playback Presentation and Long Life 3 Release the Fn key The pop up window disappears You re now in the selected mode For more information on setting the battery power profile see Power Management on page 151 Additional options for power Depending on the amount of time you spend away from external power sources the capacity of one battery pack may be sufficient for your needs However if you need more portable power Toshiba provides these options Purchase extra battery packs Purchase a battery charger that charges one main battery pack and one secondary battery pack at a time Chapt
155. ormation used by a program or a document See also document file allocation table FAT The section of a disk that keeps track of the location of files stored on the disk file name A set of characters that uniquely identifies a file within a particular folder It consists of two parts the actual name and the file name extension See also file extension file extension The three characters following the period pronounced dot at the end of a file name The extension indicates the type of file Examples are exe for program files and hlp for help files See also file name folder Also called directory A container for organizing files saved to a disk A folder is symbolized on screen by a graphical image icon of a file folder A folder can contain files and other folders 216 format verb To prepare a blank disk for use with the computer s operating system Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it frontside bus The primary pathway bus between the CPU and the computer s main memory Also called system bus See also bus function keys The keys labeled F1 through F12 typically located on the keyboard Their function is determined by the operating system and or individual programs G gigabyte GB A unit of data equal to 1 073 741 824 bytes 1024 x 1024 x 1024 bytes See also byte gr
156. ound A conductor to which all components of an electric circuit are connected It has a potential of zero 0 volts is connected to the earth and is the point of reference for voltages in the circuit lat hard disk A storage device composed of a rigid platter or platters that can be magnetically coded with data Hard disks hold much more information than diskettes and are used for long term storage of programs and data The primary or only hard disk in a computer is usually fixed but some computers have secondary hard disks that are removable By default the hard disk is referred to as drive C hardware The physical components of a computer system Compare software Hibernation A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work including all open files and programs when you turn the computer off When you turn on the computer again your work is returned to the same state it was when the computer was turned off See also Standby Suspend high density diskette A 3 5 inch diskette that holds 1 44 MB of data See also diskette hot key 1 A feature in which certain keys in combination with the Fn key can set system options or control system parameters such as the battery save mode 2 A key or combination of keys that activates a memory resident program Glossary 2 hot swapping The ability to add or remove devices from a computer while the c
157. ource Other types of speakers will be inadequate to produce sound from the computer To play back sound files through external speakers or headphones 1 Locate the headphone jack on the computer 2 Using any necessary adapters plug the cable from the headphones or external speakers into the headphone jack The headphone jack requires a 16 ohm stereo mini jack To adjust the volume For external speakers use the volume controls on each speaker For headphones use the computer s volume control dial 1 36 Enhancing Productivity Inserting and removing hard drives Inserting and removing hard drives Your Satellite M30 M35 can use various hard drive capacities Depending upon the original hard drive installed in your computer you may wish to increase storage capacity by changing the internal drive or you can also add additional hard drive space by inserting a drive into the select bay module To change the internal hard drive 1 Shut down your computer completely using the Shut Down command See Powering down the computer on page 91 2 Unplug the computer Close the display panel and remove any cables you may have connected 4 Turn the computer upside down Remove the screw on the hard drive cover Removing the hard drive cover screw 6 Life the edge of the hard drive cover and lift it up to expose the hard drive Enhancing Productivity 1 3 Inserting and removing hard
158. p that functions as the brain of the computer It takes information from outside sources such as memory or keyboard input processes the information and sends the results to another device that uses the information character Any letter number or symbol you can use on the computer Some characters are non printing characters such as a paragraph break in a word processing program A character occupies one byte of computer storage chip A small piece of silicon containing computer logic and circuits for processing memory input output and or control functions Chips are mounted on printed circuit boards click To press and release the AccuPoint control button or mouse button without moving the AccuPoint or mouse In Windows this refers to the left mouse button or primary AccuPoint control button unless otherwise stated See also double click color palette A set of specified colors that establishes the colors that can be displayed on the screen at a particular time w 213 compatibility The extent to which computers programs or devices can work together harmoniously using the same commands formats or language as another configuration 1 The collection of components that make up a single computer system 2 How parts of the system are set up that is configured controller A device that controls the transfer of data from a computer to a peripheral device and vice versa For example
159. pairs any damage it finds To run Error checking 1 Click Start then click My Computer 2 Right click the drive you want to check and select Properties from the menu The drive s properties box appears Click the Tools tab 4 Click the Check now button The Check Disk All Apps box appears 5 You can choose one or both options Automatically fix file system errors Scan for and attempt recovery of bad sectors 6 Click Start Error checking runs the test Your hard disk seems very slow If you have been using your computer for some time your files may have become fragmented Run Disk Defragmenter To do this click Start then click All Programs point to Accessories and System Tools and click Disk Defragmenter lf Something Goes Wrong 1 T Resolving a hardware conflict Your data files are damaged or corrupted Refer to your software documentation for file recovery procedures Many software packages automatically create backup files You may also be able to recover lost data using utility software which is available from your dealer Some programs run correctly but others do not This is probably a configuration problem If a program does not run properly refer to its documentation and check that the hardware configuration meets its needs A diskette will not go into the external diskette drive You may already have a diskette in the drive Make sure the drive is empty You may be inserting the
160. port 1 parallel port large scale integration megabyte Musical Instrument Digital Interface personal computer Peripheral Component Interconnect 2710 aa PCMCIA WAN www Terms These terms may appear in this user s guide A Personal Computer Memory Card International Association random access memory radio frequency interference read only memory real time clock small computer system interface double data random access memory static random access memory super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web active matrix display A liquid crystal display LCD made from an array of liquid crystal cells using active matrix technology Also known as a TFT display in its simplest form there is one thin film transistor TFT for each cell This type of display works well with notebook computers because of its shallow depth and high quality color Active matrix displays are viewable from wider angles than most passive matrix displays adapter A device that provides a compatible connection between two units For example the computer s internal display adapter receives information from the software and translates it into images on the screen An adapter can take a number of forms from a microprocessor to a simple connector An intelligent adapter one that is capable of doing some processing may also be called a contr
161. problems My Internet connection is very slow Many factors contribute to the speed with which you can surf the Internet They include modem speed time of day when everyone else is surfing your access can be slow and popularity of the site If accessing a particular site 1s very slow try later My browser cannot find the URL address I typed in Make sure you separated the domain names of the address with the forward slash Check the spelling of each name and the syntax of the address carefully A single incorrect letter or missed character comma instead of period dot or other mistake makes it impossible for your browser to locate the site My browser cannot find a site I bookmarked The World Wide Web is constantly changing A site you bookmarked yesterday may not be available today or its server may be down for temporary repair Try again later The Windows XP operating system can help you If the operating system has started properly but you still have a problem using your computer the online Help can assist you in troubleshooting the problem To access Windows XP Help and Support 1 Click Start then click Help and Support lf Something Goes Wrong 1 6 Resolving a hardware conflict The Help and Support window appears 2 Then do one or both of the following In the search field type in the topic of the problem with which you need help and follow the on screen instructions C
162. quipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advanced notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary If trouble is experienced with this equipment for repair or limited warranty information please contact Toshiba Corporation Toshiba America Information Systems Inc or an authorized representative of Toshiba or the Toshiba Support Centre within the United States at 800 457 7777 or Outside the United States at 949 859 4273 If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved Disconnection If you should ever decide to permanently disconnect your modem from its present line please call the telephone company and let them know of this change Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device including Fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and an identification of the business or other entity or other individual sending the mess
163. quipment with Bluetooth wireless technology on board of airplanes or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment Regulatory statements This product complies with any mandatory product specification in any country region where the product is sold In addition the product complies with the following European Union EU and EFTA This equipment complies with the R amp TTE directive 1999 5 EC and has been provided with the CE mark accordingly Canada Industry Canada IC This device complies with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device L utilisation de ce dispositif est autoris e seulement aux conditions suivantes 1 il ne doit pas produire de brouillage et 2 l utilisateur du dispositif doit tre pr t accepter tout brouillage radio lectrique re u m me si ce brouillage est susceptible de compromettre le fonctionnement du dispositif The term IC before th
164. r a longer period you can use the Windows Turn Off command when not connected to a domain server or the Shut down when connected to a domain server instead CAUTION Never turn off the computer while any drive is in use Doing so may damage the media in use and result in loss of data For more information see Powering down the computer on page 91 Closing the display panel When you are finished shut the computer down and close the display panel to keep dust and dirt out of the computer If you close the computer while it is still on these actions will occur If you have the LCD power saver feature set the LCD panel will automatically turn off until you open it again If you have the audible warning set the computer will beep to notify you that it is still on gt If you have an action feature set the computer will perform either Nothing Standby Hibernate or Turn Off see Enabling Hibernation on page 156 Using external display devices Your computer comes with a built in LCD display but you can also connect three different types of external display devices to one of two available video ports A television via the video out port Getting Started DO Using external display devices TECHNICAL NOTE In the Windows XP operating system you do not need an Internet connection to watch cable or broadcast TV but you must purchase a compatible TV tuner card A vide
165. rking equipment and can connect many different kinds of electronic devices without the need for cables This feature uses the 2 GHz or 5 GHz frequency band for wireless communications and can transmit at data rates up to 54 MBps The range through Enhancing Productivity 1 21 An overview of using the Internet walls and floors of the wireless transmission is up to 100 feet To use your wireless communication flip the wireless on off switch to the On position An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features under these headings The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet Internet features Uploading and downloading files from the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines They all work together to share information The World Wide Web The World Wide Web or Web is a subset of the Internet a collection of interlinked documents located on computers connected to the Internet that work together using a specific Internet protocol called Hypertext Transfer Protocol HTTP The World Wide Web offers information as text images audio or video to be referenced from anywhere in the world Special programs called Web browsers ar
166. rrnen 109 Power profiles in Windows XP eee 110 Using a hot key to set the power profile 111 Additional options for poWer ceceeeeeeeeee 111 Chapter 4 Expansion Options 0 cee eee 112 Devices for office COMPUTING eee 112 Connecting external optional devices 113 Using an external keyboard ereere 113 USING a MOUSE ooo cece ecceecceeesesseeeeesssseeeeesssees 113 Connecting a USB MOUSE cece 113 USING a printer ccecce 113 Connecting a parallel printer oo 114 Setting up your printer oe eee eee 115 Using the Wi Fi Wireless LAN Mini PCI module 118 Chapter 5 Enhancing Productivity ee 119 Exploring the desktop o oo eecceseeeessseeeeseeneees 119 Finding your way around the desktop 119 Exchanging data with another computer 122 Transferring files ccnn 122 Getting help transferring files oo 123 setting up for communications 0 123 Connecting the modem to a telephone line 124 Connecting your computer to a network 125 An overview of using the Internet ccc 127 The Internet occse 127 The World Wide Web scce 127 Internet Service Providers scssi 128 Connecting to the Internet oo 128 Surfing the Internet wo sees eee 129 Internet features neern 129 Contents 29 Uploading and downloading files from INE UMOMOL ecocestcatcoasconsrecsiegeecseueesaates 130 Exploring audio features ecce 130 Playing an audio CD sassacc
167. s If you have installed your own programs you should back up these programs as well as your data files If something goes wrong that requires you to reformat your hard disk and start again reloading all your programs and data files from a backup source will save time Read the user s guides It s very difficult to provide a fail safe set of steps you can follow every time you experience a problem with the computer Your ability to solve problems will improve as you learn about how the computer and its software work together Get familiar with all the user s guides provided with your computer as well as the manuals that come with the programs and devices you purchase Your local computer store or book store sells a variety of self help books you can use to supplement the information in the manuals lf Something Goes Wrong 1 85 If you need further assistance if you need further assistance If you have followed the recommendations in this chapter and are still having problems you may need additional technical assistance This section contains the steps to take to ask for help Before you call Since some problems may be related to the operating system or the program you are using it is important to investigate other sources of assistance first Try the following before contacting Toshiba Review the troubleshooting information in your operating system documentation Ifthe problem occurs while you are ru
168. s The RJ 11 connector is a 6 wire connector m 291 ROM read only memory Non volatile memory that can be read but not written to By non volatile we mean that information in ROM remains whether or not the computer is receiving power This type of memory is used to store your computer s BIOS which is essential instructions the computer reads when you start it up See also BIOS memory Compare RAM select To highlight or otherwise specify text data or graphics with the intent to perform some operation on it serial Processes that occur one at a time In communications it means the transmission of one bit at a time sequentially over a single channel On your computer the serial port provides a serial interface between the computer and an appropriate device Compare parallel shortcut See keyboard shortcut software See program Compare hardware Standby A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again Suspend A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again system disk A diskette that contains the operating system files needed to start the computer Any diskette can be formatted as a syst
169. s hot key turns the scroll lock feature on and off Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide This appendix shows the shapes of the typical AC power cable connectors for various parts of the world USA and Canada United Kingdom mpa UL approved it CSA approved BS approved Australia Europe VDA approved i kii NEMKO approved 197 Appendix C Using ConfigFree with your Toshiba Computer ConfigFree is a set of utilities used for configuring networks that use both wired and wireless network devices These utilities include the following Connectivity Doctor The Connectivity Doctor utility is used to help fix networking problems with your notebook computer For more information see Connectivity Doctor on page 201 Device Settings The Device Settings utility is used to enable and disable any of the wired wireless and infrared for systems with infrared network devices You can also change the device properties of your wired and wireless local area network LAN and specify settings to automatically switch between wired and wireless LAN For more information see Device Settings on page 202 Profile Settings The Profiles utility is used to enable a faster and more efficient network configuration Multiple profiles can be created for various network configurations For more information see Profile Settings on page 204
170. s product It is designed to be connected to a compatible modular jack that is also compliant The REN is used to determine the number of devices that may be connected to a telephone line Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by the total RENs contact the local telephone company For products approved after July 23 2001 the REN for this product is part of the product identifier that has the format US AAAEQ TXXXX The digits represented by the are the REN without a decimal point e g 03 is a REN of 0 3 For earlier products the REN is separately shown on the label Connection to party line service is subject to state tariffs Contact the state public utility commission public service commission or corporation commission for information Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can In order to do this it may occasionally be necessary for them to make changes in their equipment operations or procedures If these changes might affect your service or the operation of your equipment the telephone company will give you notice in writing to allow you to make any changes necessary to maintain uninterrupted service If Problems Arise If this e
171. s to use the display hot key Fn F5 1 2 Press Fn and F5 simultaneously While holding down Fn press F5 repeatedly until the setting you want takes effect This hot key cycles through the settings in the following order Built in display only Built in display and external monitor simultaneously External monitor only Built in display and TV or other external video device simultaneously TV or other external video device only Release the Fn key 62 Getting Started Using external display devices A TECHNICAL NOTE You can also change these settings using L the Display Properties Box Set the option for the video controller by clicking Start then Control Panel and clicking Display Choose the Settings tab click the Advanced button select Display Device select the applicable Monitor type click Apply or OK For more information on switching the display output see Directing the display output when you turn on the computer on page 61 Adjusting the quality of the external display To obtain the best picture quality from your television or other video display device you may need to adjust the video settings See the video device documentation for additional configuration steps TECHNICAL NOTE In order to use one of the simultaneous L modes you must set the resolution of the internal display A panel to match the resolution of the external display device The external display de
172. sentative or your network administrator Equipment that generates a strong electromagnetic field such as large stereo speakers other than speakers that are connected to the computer or speakerphones Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters Extreme heat cold or humidity Operate the computer within a temperature range of 41 degrees to 95 degrees Fahrenheit 5 degrees to 35 degrees Celsius and 20 percent to 80 percent non condensing humidity Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers However with a little care and the proper use of the equipment you can work comfortably throughout the day WARNING Using the computer keyboard incorrectly can result in discomfort and possible injury If your hands wrists and or arms hurt while typing stop using the computer and rest If the discomfort persists consult a physician This section provides hints on avoiding strain and stress injuries For more information consult books on ergonomics repetitive strain injury and repetitive stress syndrome Getting Started 39 Selecting a place to work Placement of the computer Proper placement of the computer and external devices is important to avoid stress related injuries Consider the following when placing your computer gt Sd Place the compu
173. st Group 1 CAUTION Bluetooth wireless technology is a new innovative technology and TOSHIBA has not confirmed compatibility of its Bluetooth products with all PCs and or equipment using Bluetooth wireless technology other than TOSHIBA portable computers Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more up to a total of seven TOSHIBA portable computers using these cards Please contact TOSHIBA PC product support on Web site htto www toshiba europe com computers tnt bluetooth htm in Europe or http www pcsupport global toshiba com in the United States for more information When you use Bluetooth cards from TOSHIBA close to 2 4 GHz Wireless LAN devices Bluetooth transmissions might slow down or cause errors If you detect certain interference while you use Bluetooth cards from TOSHIBA always change the frequency move your PC to the area outside of the interference range of 2 4 GHz Wireless LAN devices 40 meters 43 74 yards or more or stop transmitting from your PC Please contact TOSHIBA PC product support on Web site http www toshiba europe com computers tnt bluetooth htm in Europe or http www pcsupport global toshiba com in the United States for more information Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasio
174. strap program as in pulling itself up by its bootstraps a program that loads and initializes the operating system See also reboot boot disk See system disk boot priority startup sequence The order in which the computer accesses its disk drives to locate the startup files Under the default startup sequence the computer looks for the startup files in the diskette drive before checking the hard disk 212 0 bus An electrical circuit that connects the central processing unit CPU with other parts of the computer such as the video adapter disk drives and ports It is the pathway through which data flows from one device to another See also bus speed frontside bus bus speed The speed at which the central processing unit CPU communicates with the other parts of the computer byte A sequence of eight bits A byte is the smallest addressable unit of data See also bit gigabyte kilobyte megabyte C cache A section of very fast memory in which frequently used information is duplicated for quick access Accessing data from cache is faster than accessing it from the computer s main memory See also CPU cache LI cache L2 cache CD An individual compact disc See also CD ROM CD ROM compact disc read only memory A form of high capacity storage that uses laser optics instead of magnetic means for reading data See also CD Compare DVD ROM central processing unit CPU The chi
175. tained indefinitely Restoring information from the hard disk takes longer than restoring it from memory When you start up again the computer runs a self test loads the operating system and then returns to the mode in which you left it Factors to consider when choosing Hibernation While in Hibernation mode the computer uses no battery power Because the mode of the system is held on the hard disk no data is lost if the main battery discharges When starting up again Hibernation uses less time and battery power than does Turn off computer Restarting from Hibernation uses a little more time and battery power to start up than restarting from Standby because information is being retrieved from the hard disk rather than from memory Learning the Basics O5 Powering down the computer When starting up again the computer returns to the mode in which you left it including all open programs and files you were using Configuring your computer for Hibernation 1 Open the Start menu click Control Panel then Performance and Maintenance i 2 Click the Toshiba Power Saver icon 3 Click the Setup Action tab 4 Select Hibernation for the options you want When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button When I close the lid Set this option to Hibernate so that the computer will go into Hibernation mode when you close the
176. tected an exclamation point displays in the Connectivity Doctor screen at the relevant location You can then view a possible cause and solution for the problem by clicking on the exclamation point For example if the connection to a wireless network cannot be established because the wireless communication switch is turned off an exclamation point displays next to the wireless communication switch Upon clicking the exclamation point a description of the problem and a solution displays 202 Using ConfigFree with your Toshiba Computer ConfigFree Utilities Wireless Communication Switch is tumed OFF c 1 Tuan on the wireless communication switch 3 1 14 Stay on the task tray The Connectivity Doctor The Connectivity Doctor screen automatically refreshes However you can also use the Refresh button to refresh the screen Device Settings The Device Settings screen displays a list of all wired wireless and infrared for systems with infrared devices that are connected to the network Detailed information about each device such as the driver version number and the status are also displayed Using ConfigFree with your Toshiba Computer 203 ConfigFree Utilities ern Bi ee TREN arenieat a AL Adaptec Name IntelR PRO 100 VE Network Connecti Intel R PROCES VE Network Connection DevicelD PCINVEN_S086 DEV_1031 amp SUBSYS_000 SET Res ee oe SR Ae ot BEE Be St Enable i i Toshiba Wireless LAN Mini P
177. ter on a flat surface at a comfortable height and distance You should be able to type without twisting your torso or neck and look at the screen without slouching If you use an external monitor the top of the screen should be no higher than eye level If you use a paper holder set it at the same height and distance as the screen Seating and posture When using your computer maintain good posture with your body relaxed and your weight distributed evenly Proper seating is a primary factor in reducing work strain Some people find a backless chair more comfortable than a conventional chair Whichever type you choose use the following guidelines to adjust your chair for maximum computing comfort Below eye CO Approximately 90 angles Footrest Toere Correct posture and positioning of the computer 40 Getting Started Selecting a place to work Position your chair so that the keyboard is at or slightly lower than the level of your elbow You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor If you are using a conventional chair Your knees should be slightly higher than your hips If necessary use a footrest to raise the level of your knees and ease the pressure on the back of your thighs Adjust the back of your chair so that it supports the lower curve of your spine If necessary use a cushion to provide extra
178. that the monitor s power cable is firmly plugged into a working power outlet Check that the cable connecting the external monitor to the computer is firmly attached Try adjusting the contrast and brightness controls on the external monitor Press Fn and F5 simultaneously to make sure the display priority is not set for the built in screen The screen does not look right You can change the display settings by clicking a blank area of the desktop with the secondary control button then clicking Properties This opens the Display Properties dialog box The Appearance tab of this dialog box allows you to choose the colors for the screen The Settings tab allows you to choose the screen resolution The built in screen flickers Some flickering is a normal result of the way the screen produces colors To reduce the amount of flickering try using fewer colors To change the number of colors displayed 1 Point at the desktop and click with the secondary button 2 Click Properties and then the Settings tab lf Something Goes Wrong 1 15 Resolving a hardware conflict 3 Change the Colors option and click OK For more information see Windows Help A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware Reduce the size of the color palette to one that is supported by the computer s internal display
179. the operating system Contact the manufacturer of the PC Card for information about using the card under the operating system PC Card checklist Make sure the card is inserted properly into the slot gt See Using PC Cards on page 86 for information about how to insert PC Cards Make sure all cables are securely connected Occasionally a defective PC Card slips through quality control If another PCMCIA equipped computer is available try the card in that machine If the card malfunctions again it may be defective Resolving PC Card problems Here are some common problems and their solutions The slots appear to be dead PC Cards that used to work no longer work Check the PC Card status 1 Click Start 2 Click My Computer icon with the secondary button then click Properties The System Properties dialog box appears Click the Hardware tab Click the Device Manager button lf Something Goes Wrong 1 ST Resolving a hardware conflict 5 Double click the PCMCIA adapter 6 Double click the appropriate PC Card The operating system displays your PC Card s Properties dialog box which contains information about your PC Card configuration and status The computer stops working hangs when you insert a PC Card The problem may be caused by an I O input output conflict between the PCMCIA socket and another device in the system Use Device Manager to make sure each device has its own I O base
180. the tray CAUTION lf you insert the disc incorrectly it may jam the drive If this happens contact your Toshiba support for assistance 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place You are ready to use the disc Removing compact discs To remove a compact disc CD or DVD with the computer turned on 1 Press the eject button on the drive CAUTION Do not press the eject button while the in use indicator light is glowing Doing so could damage the disc or the drive Also if the disc is still spinning when you open the disc tray wait for it to stop spinning before you remove It 2 Pull the tray until it is fully open remove the disc and place it in its protective cover 3 Gently push the tray in to close it Learning the Basics 85 Using the DVD ROM or multi function drive To remove a compact disc with the computer turned off 1 Insert a slender object such as a straightened paper clip into the manual eject hole 2 Gently pull the tray out until it is fully open remove the disc and place it in its protective cover 3 Gently push the tray in to close it Caring for CDs or DVDs Discs Store your discs in their original containers to protect them from scratches and keep them clean Do not bend a disc or place heavy objects on top of it Do not apply a label to or otherwise mar the surface of a disc Hold a disc by its outsi
181. tic characters while the overlay is on For lowercase letters hold down Fn while you type the letters Learning the Basics 13 Starting a program For uppercase letters hold down both Fn and Shift while you type the letters To use the numeric overlay keys while the cursor control overlay is on Hold down Shift while you use the numeric overlay keys To return to the cursor control overlay release Shift To disable the cursor control overlay hold down the Fn key and press F10 again The cursor control mode light on the keyboard indicator panel goes out Starting a program The easiest way to start a program is to double click the name of the file that contains the information you want to work on To find the file use My Computer or Windows Explorer If you prefer to open the program first you have four options You can Double click the icon for the program on your desktop Use the Start menu Use Windows Explorer or My Computer to locate the program file Use the Run dialog box The next three sections explain how to start a program from the Start menu Explorer and the Run dialog box Starting a program from the Start menu When you install a program the operating system usually puts an icon in the All Programs menu To start a program that has an icon in the All Programs menu follow these steps which use the Windows WordPad program as an example 1 Click Start then p
182. tions Repairs to certified equipment should be coordinated by a representative designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Caution Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate 2 The user manual of analog equipment must contain the equipment s Ringer Equivalence Number REN and an explanation notice similar to the following The Ringer Equivalence Number REN of this device can be found on the label affixed to your computer NOTICE The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 N 3 The standard connecting arrangement telephone jack type for this equipment is jack type s U
183. to the computer and the printer Run the printer s self test to check for any problem with the printer itself Make sure you installed the proper printer drivers as shown in Setting up your printer on page 115 You may have connected the printer while the computer is on Disable Stand By mode turn off the computer and turn off the printer Turn the printer back on make sure it is on line then turn the computer back on Try printing another file For example you could create and attempt to print a short test file using Notepad If a Notepad file prints correctly the problem may be in your original file If you cannot resolve the problem contact the printer s manufacturer The printer will not print what you see on the screen Many programs display information on the screen differently from the way they print it See if your program has a print preview mode This mode lets you see your work exactly as it lf Something Goes Wrong 1 83 Develop good computing habits will print Contact the software manufacturer for more information Modem problems This section lists common modem problems The modem will not receive or transmit properly Make sure the cable from the modem to the telephone line 1s firmly connected to the computer s modem port and the telephone line jack Check the port settings to make sure the hardware and software are referring to the same COM port Check the communications parameters
184. und will come from the speakers or headphones Q 191 1 902 Hot Keys Instant password security Instant password security Fn This hot key blanks the display When the display re appears select your user name and enter the correct password if you have created one Power usage profile F2 Fn e This hot key displays the power usage pop up window and cycles through the profiles The power usage profiles are Full Power High Power Normal DVD Playback Presentation and Long Life QQAQSse Full Power Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility For more information see Mobile Computing on page 99 Hot Keys 1 93 Stand By mode Stand By mode F3 Fn 0 This hot key puts the computer into Stand By mode A message box is displayed by default to confirm that the computer is going into Stand By mode This message box can be set so it does not display Do vou with to switch the machine to standby Do not show this message in the future Sample Stand By confirmation box For more information about Stand By mode please see Using Standby on page 96 1 QO 4 Hot Keys Hibernation mode Hibernation mode F4 Fn o This hot key puts the computer into Hibernation mode If Hibernation mode is enabled the default a message box is displayed by default to confirm the computer is going into
185. utine The screen does not look right Unless a hardware device has failed problems usually occur when you change the system in some way such as installing a new program or adding a device If you experience any of these problems use the options in the Startup menu to fix the problem lf Something Goes Wrong 1 65 The Windows operating system is not working Using Startup options to fix problems If the operating system fails to start properly you may have to change your system s configuration or verify the startup procedure to fix the problem To do this use the options in the Startup menu This section describes each option and when to use the procedure To open the Startup menu 1 2 Restart your computer Press F8 when your computer starts The Windows Advanced Options menu displays these options Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable VGA Mode Last known good configuration your most recent settings that worked Directory Services Restore Mode Windows domain controllers only Debugging Mode Start Windows normally Reboot Return to OS Choices menu 1 66 lf Something Goes Wrong The Windows operating system is not working See your Windows documentation for further explanation A TECHNICAL NOTE If your computer is connected to a L network the Startup menu may display different versions of a Safe mode Internet
186. ution or attachment of connecting cables and equipment other than specified by Toshiba The correction of interference caused by such unauthorized modification substitution or attachment will be the responsibility of the user NOTE The following information is dependent on what type of wireless device is in your computer Approved Countries Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries regions in the following table CAUTION Do notuse this equipment except in the countries regions in the following table NOTE This device works on passive scan only A peer to peer mode is not available in 802 11a and Turbo Mode 802 11b 2 4 GHz Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA 802 1 1a 5 GHz Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA Turbo Mode 5 GHz Canada USA Approved Countries Regions for use for the Intel PRO Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries regions in the following table
187. verything you can do in the Windows XP Home or XP Professional operating system You use its features to start programs find documents set up system components and perform most other computing tasks HINT The illustrated examples in this guide may appear Slightly different from the screens displayed by your system The differences are not significant and do not indicate any change in the functionality of your system Finding your way around the desktop Your computer s desktop includes several standard features icons Start button taskbar system tray and background pattern 119 1 20 Enhancing Productivity Exploring the desktop Icons Satellite k N B q Slot O40 2B PDEA siom Start button Taskbar System tray Sample Windows XP operating system desktop Icons An icon represents a folder file or program that can be quickly activated by double clicking the icon You can create a new desktop icon for any folder file or program by dragging the element s icon from its location in a window to the desktop area The icons initially displayed on your system desktop include Recycle Bin Holds files you have deleted You may be t able to retrieve these files until you empty the Recycle Bin TECHNICAL NOTE If you delete a file from a diskette it does not go into the Recycle Bin For more information on the Recycle Bin see Windows online Help E
188. vice must support a resolution of 640 X 480 or higher Getting Started 63 Using an external keyboard Using an external keyboard If you prefer to use a full size keyboard you can attach one to your computer The computer s USB port supports any USB compatible keyboard Using a mouse You may want to use a mouse instead of the computer s built in TouchPad You can use a USB compatible mouse NOTE After logging on to your system the mouse cursor may move to the upper right side of the screen If this occurs push the Esc or Windows key to return it to its original position Connecting a local printer CAUTION Your printer documentation may require you to install the printer software before physically connecting the printer to your computer If you do not install the software as instructed by the printer manufacturer the printer may not function correctly CAUTION Never connect the printer cable while the computer s power is on Doing so may damage the printer the computer or both NOTE Read the documentation that came with your printer Follow the manufacturer s instructions when connecting a local printer 64 Getting Started Connecting a local printer NOTE You must supply the proper printer cable If one did not come with your printer you may purchase one from an electronics or computer store If your printer is ECP or IEEE compliant make sure your printer c
189. vices that transfer high levels of data in real time such as video devices As with USB ports the 1 LINK port supports both Plug and Play automatic configuration and hot swapping the ability to connect and disconnect devices while the computer is on The main difference between 1 LINK and USB technology is that 1 LINK supports faster data transfer rates Connecting your modem to a telephone line Your computer comes with a built in modem that can be connected to a standard voice grade telephone line The modem allows you to Access the Internet Communicate with your office s local area network LAN or a larger corporate wide area network WAN For specific information about connecting toa LAN or WAN consult your network administrator Send a fax directly from your computer For more detailed information regarding your computer s modem visit Toshiba s web site at toshiba com Enhancing Productivity 1 43 Connecting your modem to a telephone line Connecting to a phone line Before you can communicate using the modem you need to connect it to a telephone line Your computer s built in modem port provides an RJ 11 jack allowing you to connect the modem to a standard voice grade telephone line 1 Plug one end of the telephone cable into the modem port on the back of the computer Connecting the telephone cable to the modem port 2 Connect the other end to the RJ 11 wall jack Co
190. w profile with the properties you require The DVD Playback profile applies only when a DVD program is playing Quickly creating a new power mode 1 Highlight one of the preset profiles 2 Click Copy 3 Anew mode appears with the title Copy of Name where Name is the title of the mode you copied You can change the name description or icon for this profile by clicking Property Customizing a power mode 1 Highlight the profile you want to modify 2 Change the settings you want on the Basic Setup tab 3 You may also change settings on the Setup Action tab Keep in mind however that by default these actions will apply to all profiles Mouse utility The Mouse utility allows you to change your TouchPad or mouse settings To access the Mouse utility through the TOSHIBA Console double click the Mouse icon 1 D 4 Toshiba Utilities TOSHIBA Console Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby Fn F3 and Hibernation Fn F4 To activate 1 Click Start All Programs Toshiba Utilities then click the Hotkey utility The Hotkey window appears Toshiba Hotkey v Display a Standby confirmation message it Fn F3 is pushed w Display a Hibernation confirmation message if Fn F4 is pushed Cancel Sample Toshiba Hotkey utility window 2 Select the desired option 3 Click OK Toshiba Hardware Settings Toshiba Hardware S
191. w shows all the folders contained within the Program Files folder In the left part of the window click Windows NT Click Accessories Windows Explorer shows the contents of the Accessories folder on the right side of the window 8 Inthe right part of the window double click WordPad The operating system opens WordPad 4 To close the program click the Close button in the upper right corner of the program s window Starting a program from the Run dialog box This example uses the Run command to start WordPad 1 Click Start then click Run The Run dialog box appears m Type the name of a program Folder document or at Internet resource and Windows will open it For you x Cancel Browse Sample Run dialog box 2 Inthe Run dialog box If you know the program s location type the command line For a program in the Windows folder type just the program name Otherwise type the full file path For example to access WordPad type c Program Files WindowsNT Accessories Wordpad then click OK 16 Learning the Basics Saving your work If you do not know the location click Browse In the Browse dialog box enter the file name for example wordpad exe and select the drive to search When the operating system has found the file click Open NY HINT To run the same program again click the arrow to the right of the text box and select the command line from the drop down list
192. wer or change the features and functions of the original design 12 Article 17 Any use of low power radio frequency electric machinery shall not Using affect the aviation safety and interfere with legal communications In event that any interference is found the use of such electric machinery shall be stopped immediately and reusing of such products can be resumed until no interference occurs after improvement The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial scientific and medical radio emission electric machinery this Equipment in Japan In Japan the frequency bandwidth of 2 400 MHz to 2 483 5 MHz for second generation low power data communication systems such as this equipment overlaps that of mobile object identification systems premises radio station and specified low power radio station 1 Sticker Please put the following sticker on devices incorporating this product In the frequency bandwidth of this equipment industrial device scientific device medical device like microwave oven licensed premises radio station and non licensed specified low power radio station for mobile object identification system RF ID that is used in product line of factories Other Radio Stations are used 1
193. y Certification and it belongs to the device class of radio equipment of low power data communication system radio station stipulated in the Radio Law of Japan The Name of the radio equipment EY XF2CS TELECOM ENGINEERING CENTER Approval Number 01NYDA1305 The following restrictions apply Do not disassemble or modify the device Do not install the embedded wireless module into other device DVD ROM multi function drive safety instructions The DVD ROM and multi function drives employ a laser system To ensure proper use of this product please read this instruction manual carefully and retain for future reference Should the unit ever require maintenance contact an authorized service location Use of controls adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure To prevent direct exposure to the laser beam do not try to open the enclosure 22 Location of the required label Sample shown below Location of the label and manufacturing information may vary Product is certified by the manufacturer to comply with DHHS rules 21 CFR sub chaper J applicable at the date of manufacture MANUFACTURED Toshiba Corporation 1 1 Shibaura 1 Chome Minato Ku Tokyo 105 0061 Japan CLASS 1 LASER PRODUCT LASER KLASSE 1 A CAUTION his appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly

Toshiba M35 Series Laptop User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents