Symphonic LCD TV/DVD TV DVD Combo User Manual
Contents
1. OWNER S MANUAL O Disc ONLY CSTL20D5 20 inch If you need additional operating assistance after reading this owner s manual or to order replacement accessories please call TOLL FREE 1 800 242 7158 Or visit our WEB SITE at http www Symphonic us Please read before using this equipment PRECAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT CAUTION To REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE The caution marking is located on the rear of the cabinet IMPORTANT SAFEGUARDS 1 Read instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions sult your appliance dealer or local power company For the units intended to operate from battery power or other sources refer to the operating instructions should be retained for future re2. 19 MENU RU REUS ale 19 RESUME vane 19 PAUSE nd dott 19 STEP BY STEP PLAYBACK 19 FAST FORWARD FAST REVERSE 20 SLOW FORWARD SLOW REVERSE 20 e 20 SEARCH FUNCTION 21 TRACK SEARCH Eee ens 21 TITLE CHAPTER SEARCH 21 TIME SEARCH etenim hee DE eR b 22 MARKER SET UP SCREEN 22 SPECIAL PLAYBACK FUNCTION 23 REPEAL 23 A B REPEAT 2 23 PROGRAM 222 2 24 RANDOM PLAYBACK 24 CHANGING THE SETTINGS 25 SUBTITLE LANGUAGE enn ette 25 AUDIO LANGUAGE 25 STEREO SOUND MODE ek RR eR 25 CAMERA ANGLE esu vetet ere e ak 26 BLACK LEVEL SETTING ec rmm 26 VIRTUAL SURROUND 26 THE ON SCREEN INFORMATION 27 CHANGING THE DVD SET UP ITEMS 28 CUSTOM Rem erem em aie 28 D LANGUAGE SETTING 28 DISPLAY SETTING 28 F AUDIO SETTING 29 G PARENTAL CONTROL 29 HOTHER SETTINGS eere 30 INITIALIZE ennt bent ten pter es 30 LANGUAGE CODE LIST 31 CABLE CHANNEL DES
3. PRECAUTIONS 22 IRE ER x ERR 2 IMPORTANT SAFEGUARDS 2 SUPPLIED ACCESSORIES 4 LOCATION 22 xtti eb bed esr poe be ng 4 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE 4 WARNING ebbe RP ha eme 4 SYMBOLS USED IN THIS MANUAL 4 MET STAND puters 4 TABLE OF CONTENTS 5 FEATURES o3 e x RR REEL ARIETE 6 OPERATING CONTROLS AND FUNCTIONS 7 INSTALLING THE BATTERIES 8 PREPARATION FOR USE 9 ANTENNA CABLE CONNECTION 9 EXTERNAL CONNECTION 10 TV OPERATION AND SETTINGS 11 WATCHING A TV PROGRAM 11 CHANNEE SET ES EY 12 PICTURE GONTROL 259 3 AREE 13 BACK LIGHT SETTING 13 SLEEP TIMER DEDE e Cio pad ie hs 13 CLOSED CAPTION SYSTEM 14 MTS Multi Channel Television Sound System 14 V CHIP SETUP Seed 15 Al TV RATING SET UP 15 MPAA RATING SET UP 16 C CHANGE ACCESS CODE 16 MENU LANGUAGE mw ke Ren 16 ABOUT THE DISCS 17 PLAYABLE DISCS 4 17 UNPLAYABLE DISCS 17 PLAYING A DISC ri ER IRR RR 18 BASIG PLAYBACK 18 5
4. aw NOTE When doing this for the first time enter any 4 digits except for 4737 That number will be used as the password in the event you forget the password see below To change the password press A or V to select PASSWORD at step 4 then press ENTER Enter the four digit password then press ENTER With some DVDs it may be difficult to find if they are compatible with parental lock Be sure to check if the parental lock function operates in the way that you have set Record the password in case you forget it CONTROL LEVELS ALL parental locks are canceled Level 8 DVD software of any grade adult general children can be played back Levels 7 to 2 Only DVD software intended for general use and children can be played back Level 1 Only DVD software intended for children can be played back with those intended for adult and gen eral use prohibited OTHER SETTINGS Follow steps 1 to 2 in the 923 on page 28 3 Press A or v to select the below items then press ENTER Ca SETUP OTHERS di mp ANGLETCON ON NA SCREENSAVER OFF gb ANGLE ICON Press ENTER repeatedly to turn Angle icon ON or OFF The default setting is ON SCREEN SAVER Press ENTER repeatedly to turn Screen Saver ON or OFF The default setting is OFF If you select ON the screen saver program starts wh
5. 2 Press ENTER then press lt or gt to select to BRIGHT NORMAL or DARK y N 37 69 ep Cx 3 Press SETUP SLEEP TIMER The Sleep Timer function turns off the unit without using POWER after a desired period of time 1 Press SLEEP ese SLEEP 0 MINUTE 2 Press SLEEP repeatedly until the desired sleep time is displayed Each press increases the time by 10 minutes up to 90 minutes After 5 seconds the Sleep Timer setting will disappear automatically If you select SLEEP 0 MINUTE Sleep Timer setting is canceled EN TV OPERATION AND SETTINGS zZ 5 Ww 7 5 CLOSED CAPTION SYSTEM You can view specially labeled cc TV programs movies news and pre recorded tapes with either a dialogue caption or text display CAPTION mode You can watch dramas movies and news while captioning the dialogues and the contents of news TEXT mode You can watch half screen text informa tion if you want 1 2 You may get these captions or text information by selecting either 1 or 2 Caption 2 is usually used for a second language if available NOTE Not all programs are broadcast with closed cap tions Your unit is designed to provide error free closed captions from high quality antenna cable and VCR signals Conversely poor quality sig nals are likely to result in caption errors or no captions at all Common signal conditions which may cause caption
6. CHAPTER SEARCH Using the Number buttons P 1 Press the Number buttons to enter the desired track number 1 Press SEARCH MODE once for the Chapter search twice for the Title search during play back PET oe I Playback will start at the selected track To select single digit track number press single 2 Within 30 seconds enter the desired chapter number e g Press 3 for track number 3 title number using the Number buttons select track numbers which are higher than 9 press 4100 10 first e g Press 100 10 2 5 for track number 25 Using SEARCH MODE Playback will start at the selected chapter or title 1 Press SEARCH MODE Press CLEAR to erase the incorrect input CF one To select single digit chapter title number press 0 first if the total number of chapter title in the The track search display appears disc 10 or more e g Press 0 2 for chapter title 2 21 EN z o E 2 2 LL lt W o Q o a lt o A ou TIME SEARCH MARKER SET UP SCREEN ADDA 20 1 During playback press SSEARCH MODE repeatedly to display the Time Search on the TV screen repeatedly 2 Within 30 seconds enter a desired disc time using the Number buttons TAL 1 29 00 Playback will start at the specified time Press CLEAR to erase the incorrect input When there
7. L ch R ch stereo Only left channel is active Only right channel is active EN SPECIAL PLAYBACK FUNCTION CHANGING THE SETTINGS DVD SECTION CAMERA ANGLE VIRTUAL SURROUND ADDN Some DVD discs contain scenes which have been shot simultaneously from various angles You can change the camera angle when the 9 icon appears on the screen 1 Press ANGLE auring playback TANGLE gt 1 8 The selected angle will be displayed on the dis play bar at the top of the screen If the ANGLE ICON setting is OFF in the OTHERS menu the 94 icon will not appear Refer to page 30 2 Press ANGLE repeatedly to select your desired angle Fics BLACK LEVEL SETTING ADDN Adjust the Black Level Settings to make the black parts of the picture brighter 1 Press MODE during playback then press ENTER to switch ON or OFF Sess 3 ON Makes the dark parts brighter OFF Shows the original picture as recorded Initial setting 2 Press MODE twice or RETURN to exit MODE RETURN Ea C twice OR 75 NOTE The setting will be saved even if the unit is turned off 0041 ACD You can enjoy surround sound effect over two speak ers on this unit 1 Press MODE repeatedly during playback then press ENTER to set it 1 2 or OFF CF repeatedly s mp ENTER 1 Natural effect 2 Emphasized effect OFF Original Sound 2 P
8. DISC HANDLING Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs To clean off use a soft cloth Do not use a hard cloth since this will mar the disc Wipe the disc in a straight line from center to edge Never wipe with a circular motion Do not use detergent or abrasive cleaning agents ELECTRICAL SPECIFICATIONS Sound output 2 speakers 1W 8 ohm OTHER SPECIFICATIONS Terminals Antenna input VHF UHF CATV 75 ohm unbalanced F type Mini DIN 4 pin jack RCA connector X 1 RCA connector X 4 S Video input Video input Audio L R input Component video input One pin jack Y 1Vpp 75 ohm Two pin jacks Pr Pb 700mVpp 75 ohm Coaxial digital audio output One pin jack 5 00mmVpp 75 ohm Headphone 1 8 stereo 3 5mm Remote control Digital encoded infrared light system Operating temperature 5 to 40 C 41 F 104 F Power requirements AC 120V 60Hz Power consumption Maximum 65W LCD 20 Dimensions 18 5 16 465mm W 23 3 8 594mm D 9 1 8 231mm Weight 14 8 lbs 6 7kg Designs and specifications are subject to change without notice If there is a discrepancy between languages the default language will be English 35 EN L3254CE WRT OX3 06 3 7 11 56 AM Page 1 FUNAI CORPORATION LIMITED WARRANTY FUNAI CORE will repair this product free of charge in CANADA in the event of defect in materials or workmanship
9. DISC MENU button P 19 Calls up the DVD menu 24 ENTER button P 12 P 19 Press to accept a setting 25 A Up V Down 4 Left gt Right buttons P 12 P 19 Press to select or adjust menu items EN 26 RETURN button P22 Press to return to the previous screen in the setup menu 27 A B button P23 Press to repeat the playback of a selected section 28 ANGLE button P26 Press to change the camera angle to see the sequence being played back from a different angle if available FRONT PANEL 31323334 35 36 3738 Fig 2 39 29 REPEAT button P23 Repeats playback of the current disc title chap ter or track 30 SUBTITLE button P25 Press to select a desired subtitle language 31 MENU button Press to enter or exit the setup menu of TV DVD 32 STOP button P 18 Press to stop operation of the disc 33 PLAY button P 18 Press to playback of the disc 34 EJECT 4 button P 18 Press to remove a disc from the unit 35 VOLUME A V buttons P 11 Press to control the volume level for the DVD and TV 36 CHANNEL A V buttons P 11 Press to select memorized channels 37 SELECT button P 11 Press to select to TV mode external input mode or DVD mode 38 POWER button P 11 P 18 Press to turn the power on and off 39 Remote sensor window INSTALLING THE BATTERIES 1 Open the battery compartment cover by pre
10. This will prevent damage to the unit due to lightning and power line surges 15 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 16 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 17 Object and Liquid Entry Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the unit 18 Servicing Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 19 Damage Requiring Service Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged or frayed IMPORTANT COPYRIGHT INFORMATION Unauthorized copying broadcasting public performance and lending of discs are prohibited This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Us
11. box or satellite box ed ADDING DELETING CHANNELS The channels you no longer receive or seldom watch can be deleted from the memory Of course you can add the deleted channel into the memory again 1 Press SETUP then press A or v to point to CHANNEL SET UP TV SETUP gt CHANNEL SET UP ETUP V CHIP SET UP 3 gt ub LANGUAGE ENGLISH C CAPTION OFF N VA BACK LIGHT n HT 2 Press ENTER then press A or v to point to ADD DELETE CH reme D CHANNEL SET UP ADD DELETE CH CATV AUTO PRESET CH 3 Press ENTER then press the Number but tons or CH A V to select the desired channel number 15 ADD DELETE 4 Press ENTER then the channel number turned to red The channel is deleted from memory If the channel number turned to blue the channel is added into memory GP e To delete another channel repeat steps 3 to 4 If you press ENTER again the channel is memorized again Added channel Light blue Deleted channel Light red D Press SETUP to exit the menu NOTE To confirm that channel s has have been deleted or added press CH A V EN POWER PICTURE SELECT EJECT C Il SLEEP C 73 ZOOM MUTE SKIP Qa REPEAT AUDIO SUBTITLE Shaded buttons are u
12. and set it to This feature enables parents to prevent their children BLOCK the higher ratings will be blocked from watching inappropriate material on TV When you try to access a program which is blocked TECTED PROGRAM by message appears on the TV screen Shaded buttons are used for following operation automatically The lower ratings will be avail able for viewing MY 1 Press SETUP then press A or v to point Boer to V CHIP SET UP Pa N CHANNEL SET UP V CHIP SET UP When you set the lowest rating to VIEW all e gt edi n N BACK LIGHT BRIGHT other ratings will automatically be available for viewing 2 Press ENTER then press the Number 5 When you select the ratings of TV Y7 TV PG Buttons to enter the access code TV 14 or TV MA you will have the option of setting sub rating categories Press A or v to select a rating with sub ratings you wish to block then press gt Wes ENTER twice Press A or v to select a sub rating then AO press ENTER to set it to BLOCK or VIEW For the first time set up or in the event the unit has lost power enter the default code of 0000 Rating Category Explanations 3 Press A or v to select RATING FV Fantasy Violence MPAA RATING or CHANGE CODE then press ENTER TV PG TV 14 TV MA ACCESS CODE EUr D Suggestive Dialog T
13. gt pause SLOW MENU AND Zr Ci ee 1 Press A B at your chosen starting point DISPLAY P ON lt ENER gt C C J ata Y Mor e IG A appears briefly on the TV screen c 2 Press A B again at your chosen end point MODE AUDO SUBTITLE ANGIE C CT C 2 Shaded buttons are used for following operation e G appears briefly on the TV screen and the repeat sequence begins REPEAT 3 To exit the sequence press A B REPEAT is available only during playback Ea C3 For DVD Vs AND NOTE The A B repeat section can only be set within 1 To activate the repeat function press di us es DVDs or current track REPEAT during playback SE ete Bde A repeat is not available with some scenes in DVD To cancel A point which was set press The repeat mode changes as described below CLEAR every time you press the button A B repeat playback does not function during title chapter track or all repeat playback G CHAPTER 3 G TITLE 3 G OFF current chapter repeat current title repeat repeat off NOTE Repeat Title Chapter is not available with some scenes Repeat setting will be cleared when moving to other title or chapter For CDs AbD 1 To activate the repeat function press REPEAT during playback The repeat mode changes as described below every time you press the button T
14. is no need to enter a number 0 appears automatically For example 0 0 appears in the Time Search display if the total time of the track or title is less than 10 minutes AND 260 Use markers to memorize your favorite places on a disc 1 Press SEARCH MODE repeatedly during playback to display the Marker screen dx TE repeatedly w 2 Press 4 or gt to select 1 2 3 4 5 6 7 8 9 or 10 and ensure that appears in the display ray 3 When you reach the desired point press ENTER Gres The Title or Track and elapsed playing time will appear in the TV screen 4 To return to the Marker later press SEARCH MODE repeatedly during playback to display the Marker screen Then press lt 4 or gt to choose the desired marker then press ENTER m TE repeatedly s gt C4 s even NOTE Operations which erase all Markers Turning off the power Ejecting a disc from the unit Pressing SELECT Selecting at step 2 and pressing r2 20 ENTER To clear a marker Press lt 4 or gt to select a cursor on to the marker number and press CLEAR You can mark up to 10 points 5 Press SEARCH MODE or RETURN to exit SEARCH MODE G tC a2 EN SPECIAL PLAYBACK FUNCTION 0 0 gt
15. mode Subtitles in a desired language You can select a desired language for the display subtitles if that language is available on a disc Selecting a camera angle You can select the desired camera angle if a disc contains sequences recorded from different angles Choices for audio language and sound mode You can select the desired audio language and sound mode if different languages and modes are available on a disc Auto power off system If there is no air signal input from the antenna terminal and no operation for 15 minutes the unit will turn itself off automatically Sleep timer Allows you to have the unit automati cally turn off at a desired time V CHIP Enables parents to prevent their children from watching inappropriate material on TV Parental lock You can set the control level to limit playback of discs which may not be suitable for children Automatic detection of discs This unit automatically detects if the loaded disc is DVD or Audio CD on disc On screen display Information about the current operation can be dis played on a TV screen allowing you to confirm the currently active functions such as program playback on the TV screen using the remote con trol Search Chapter search Title search Track search Time search Repeat Chapter Title Track All A B Zoom Allows you to enlarge video image Marker The part designated by user can be called back Resume
16. of the list at step 2 f you like to repeat the current track in the program press REPEAT several times until TRACK appears during playback If you like to repeat the entire program press REPEAT several times until IG ALL appears during playback This function shuffles the playing order of tracks instead of playback in the sequence Tin stop mode press MODE twice MODE twice s gt e RANDOM screen appears 2 Press PLAY gt to start random playback CF PLAY NOTE If you like to repeat the current track in the ran dom selection press REPEAT several times until TRACK appears during playback If you like to repeat the entire random selection press REPEAT several times until IG ALL appears during playback 224 2 EN C HANGING THE SETTINGS DISPLAY C4 veg C gt SETUP TITLE RETURN AUDIO LANGUAGE CLEAR SEARCHMODE REPEAT AB ADDN The unit allows you to select a language during DVD MODE AUDIO SUBTITLE ANGLE ae a GE disc if multi languages are available playback Shaded buttons are used for following operation SUBTITLE LANGUAGE The unit allows you to select a language for subtitles during DVD disc if available playback 1 Press AUDIO during playba
17. playback are not available during program playback ess EN MAINTENANCE CABINET CLEANING Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces SERVICING Should your unit become inoperative do not try to cor rect the problem by yourself There are no user service able parts inside Turn off unplug the power cord and please call our help line mentioned on the front page to locate an Authorized Service Center IF THE LASER OPTICAL PICKUP UNIT IS DIRTY If the unit still does not perform properly when it is oper ated while referring to the relevant sections and to TROUBLESHOOTING GUIDE in this Owner s Manual the laser optical pickup unit may be dirty Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit SPECIFICATIONS GENERAL SPECIFICATIONS TV LCD 20 inch Television system NTSC M Closed caption system 15 119 FCC Channel coverage 2 413 UHF 14 69 2 13 A W 1 W 84 5 A 1 5A 181 channel frequency synthesized tuning system Direct access keyboard programmable scan and up down Tuning System Channel access DVD Product type DVD Player Discs DVD video Audio CD
18. the current channel number on the TV screen For DVD mode P27 Press to display the current status on the TV screen 9 SETUP button P 12 P28 Press to enter or exit the setup menu of TV DVD 10 TITLE button P 19 Press to display the title menu 11 CLEAR button P 11 P21 Press to clear cancel a setting currently entered Press to clear DISC INSIDE display 12 MODE button P24 Press to call up the program random screen in stop mode Press to call up the Black Level Setting Virtual Surround screen during playback 13 SEARCH MODE button P21 Press to locate a desired point 14 AUDIO button For TV mode P 14 Press to select TV sound mode STEREO SAP MONO For DVD mode 25 Press to select a desired audio language if available 15 EJECT 4 button 18 Press to remove a disc from the unit 16 SELECT button P 11 Press to select the TV mode external input mode or DVD mode 17 CH A V buttons P 11 Press to select memorized channels 18 VOL A V buttons P 11 Press to control the volume level for the DVD and TV 19 MUTE button P 11 Press to mute the sound or press it again to restore sound 20 ZOOM button P20 Press to enlarge the part of a DVD reproduced image 21 REV lt lt button P 20 Press to view the DVD picture in fast slow reverse motion FWD PP button P 20 Press to view in fast slow forward motion 22 STOP button P 18 Press to stop operation of the disc 23
19. used check for broken wire Adjust COLOR control Poor Reception on Some Channels Try a new channel if OK then possible station trouble Ghosts in Picture s antenna connected to jack on the back of the set f outside antenna is being used check for broken wire Check for local interference Weak Picture Try new channel if OK then possible station trouble s antenna connected to jack on the back of the set f outside antenna is being used check for broken wire Adjust CONTRAST amp BRIGHTNESS control 23 EN PROBLEM Sound OK Picture Poor Picture OK Sound Poor No operation by infrared Remote Control Different color marks on screen CLOSED CAPTION PROBLEM Misspelling in captions Text is not shown in its entirety or a delay occurs from what is being said Captions scrambled with white boxes No captions in a program which must contain closed caption Black box in the TV screen NOTE CORRECTIVE ACTION Try a new channel if OK then possible station trouble s antenna connected to jack on the back of the set f outside antenna is being used check for broken wire Check for local interference Adjust CONTRAST amp BRIGHTNESS control Try a new channel if OK then possible station trouble Check for local interference Make sure the AC cord is connected to an AC outlet Check batteries in remote control Magne
20. AUDIO ORIGINAL ing SETUP from the DVD mode and select CF yf gt DISCMENUC ENTER only LANGUAGE and BACK LIGHT Cv Uno Ure eee eren AUDIO Sets the audio language 8 SUBTITLE Sets the subtitle language DISPLAY PAS DISC MENU Sets the language for DVD menu C SETUP w 4 Press A or v to select a setting then press CD eS ENTER Shaded buttons are used for following operation BR me You can change the DVD player s settings m ab eve FRENCH m CUSTOM MENU XO ee SUBTITLE OFF 1 In stop mode press SETUP twice to FRENCH IE select CUSTOM then press ENTER CF twice RE pu p e If OTHER is selected on the AUDIO SUBTITLE or DISC MENU screen press four digit number to enter the code for the desired language Refer to page 31 INITIALIZE QUICK CUSTOM If the menu does not appear press PLAY gt Only the ted by the di be selected first then press STOP W Make sure the ac iU oni ANC M DL taza ao disc is in stop mode then slowly press D Press SETUP to exit the menu SETUP twice SETUP 2 Press A or v to select the desired item c then press ENTER to confirm NOTE x SETUP CUSTOM Language Setting for Audio and Subtitle are HJ ON SURGE not valid for some discs due to defa
21. Azerbaijani 4772 Hausa 5447 Mongolian 5960 Swedish SWE 6568 Bashkir 4847 Hebrew 5569 Nauru 6047 T Basque 5167 Hindi 5455 Nepali 6051 Tagalog 6658 Bengali Bangla 4860 Hungarian HUN 5467 Norwegian NOR 6061 IE eres Bhutani 5072 O R T pee Bihari 4854 Icelandic ICE 5565 Occitan 6149 TO bent Bislama 4855 Indonesian 5560 Oriya 6164 T 58 6654 Breton 4864 Interlingua 5547 Oromo Afan 6159 Tibotan 4861 Bulgarian 4853 Interlingue 5551 Panjabi 6247 Tigrinya 6655 Burmese 5971 Inupiak 5557 Pashto Pushto 6265 Tonga eos Byelorussian 4851 Irish IRI 5347 Persian 5247 Tsonga 6665 Italian ITA 5566 Polish POL 6258 Turkish TUR 6664 Cambodian 5759 Japanese JPN 5647 Portuguese POH 6266 Turkmen 6657 Catalan 4947 Javanese 5669 Quechua 6367 wi 6669 Chinese CHI 7254 Kannada 5760 Rhaeto Romance 6459 U Z Corsican 4961 Kashmiri 5765 Romanian RUM 6461 Ukrainian 6757 Croatian 5464 Kazakh 5757 Russian RUS 6467 Urdu 6764 Czech CZE 4965 Kinyarwanda 6469 s Uzbek 6772 Danish DAN 5047 Kirghiz 5771 Samoan 6559 Vietnamese 6855 Dutch DUT 6058 Kirundi 6460 Sangho 6553 Volapuk 6861 English ENG 5160 Korean KOR 5761 Sanskrit 6547 Welsh 4971 Esperanto 5161 Kurdish 5767 Scots Gaelic 5350 Wolof 6961 Estonian 5166 L N Serbian 6564 Xhosa 7054 F H Laothian 5861 Serbo Croatian 6554 Yiddish 5655 Faroese 5261 Latin 5847 Sesotho 6566 Yoruba 7161 Fiji 5256 Latvian Lettish 5868 Setswana 6660 Zulu 7267 If you choose a language that has a 3 lett
22. DVD SECTION AbBovr THE DISCS Recorded signals Disc size Disc type Playable discs Mark logo Region code seem me ce 8 8 DVD RW Example DVD R EA Digital video 5 inches Tue TEE P a MPEG2 12cm Chapter 1 Chapter 2 y Chapter 3 Chapter 4 Chapter 1 Chapter 2 DVD RW DVD R COMPACT Audio CD 4 6 10 DIGITAL AUDIO omer fpei igi io 9 inches Example Digital audio 12cm Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 TOR MEE EES Je nee nee a me 4 5 6 9 10 COMPACT ise ReWritable Recordable BVP is a trademark of DVD Format Logo Licensing Corporation If you cannot play back a disc which bears one of the marks above check the following notes This unit conforms to the NTSC color system Discs recorded in other color systems such as PAL cannot be played back 2 Certain DVD Video discs do not operate as described in this manual due to the intentions of the disc s producers 3 Discs recorded in the VR Video Recording format cannot be played back 4 Scratched or stained discs may not be played back 5 Some discs cannot be played back because of incompatible recording conditions characteristics of the recorder or special properties of discs 6 You can play back discs which bear the marks above If you use nonstandardized discs this unit may not play them back Even if they are played back the sound or video quality
23. FIELD Select FIELD when the pictures are still unstable even if AUTO is selected FIELD stabilizes the pictures although the pic ture quality may become coarse due to the limit ed amount of data FRAME Select FRAME to display relatively motionless pictures in higher resolution FRAME improves the picture quality although may unstabilize the pictures due to simultaneous output of two field data 4 Press SETUP to exit the menu AUDIO SETTING Choose the appropriate Audio settings for your equip ment as it only affects during the playback of DVD discs Follow steps 1 to 2 in the page 28 on DRC Dynamic Range Control To compress the range of soft to loud sound The default setting is ON SETUP AUDIO ON ON BITSTREAM DRC DOWN SAMPLING DOLBY DIGITAL DOWN SAMPLING ON ON BITSTREAM ON Output in 48 kHz default OFF Output the original sound When playing disc with copyright Protection If you select OFF copyright protection will be activated and sound will be down sampled at 48kHz SETUP AUDIO DOWN SAMPLING DOLBY DIGITAL DOLBY DIGITAL QUICK Set to BITSTREAM when the unit is connected to a Dolby Digital Decoder e BITSTREAM Output a Dolby Digital signal default e PCM Convert the Dolby Digital to PCM 2 channel stereo ON ON B
24. IGNATIONS 31 TROUBLESHOOTING GUIDE 32 MAINTENANCE 55 kx memini neess xm nnd e 35 DISC HANDLING rre kage htt 35 SPECIFICATIONS 35 WARRANTY 2lskuk ek s are mx Rn 36 EN FEATURES MTS SAP Tuner Infrared remote control Trilingual on screen TV setup display available in English Spanish or French 181 channel capability PLL frequency synthesizer tuner with direct station call A converter may be necessary to view scrambled cable channels Closed Caption Decoder You may view specially labeled cc TV programs movies news etc with either a dialogue caption or text display added to the program DVD Mode Dolby Digital sound This unit can handle Dolby Digital Multi channel sur round sound when connected to a Dolby Digital decoder Still fast slow step playback Various playback modes are available including still pictures fast forward reverse slow motion and step frames Random playback for Audio CD This unit can shuffle the order of tracks to play them in random order Program playback for Audio CD You can program the order of tracks to play them in any desired order DVD menus in a desired language You can display DVD menus in a desired lan guage if available on a DVD Screen saver If the screen saver program is set to ON it starts when there is no input from the unit for 5 minutes in stop
25. ITSTREAM DRC DOWN SAMPLING DOLBY DIGITAL 4 Press SETUP to exit the menu G G PARENTAL CONTROL Parental Control limits the disc viewing that exceed your setting with a password or playback will stop it This feature allows you to prevent discs with alterna tive scenes from being played by your children PARENTAL LEVEL Parental Level allows you to set the rating level of your DVD discs Playback will stop if the disc s rat ings exceed the level you set Follow steps 1 to 2 in the page 28 on 3 Enter your four digit password then press 3 Press A or v to select the below items then press ENTER SETUP AUDIO DRC ON DOWN SAMPLING ON ENTER C DOLBY DIGITAL BITSTREAM m gt Even 29 ENTER SETUP PARENTAL PASSWORD Enter current password Press 4 7 3 7 then enter your password if you forget the password EN CHANGING THE DVD SET UP ITEMS 4 Press A or v to select PARENTAL LEVEL then press ENTER SETUP PARENTAL PARENTAL LEVEL ALL up ENTER PASSWORD CHANGE eren D Press A or v to select the desired level then press ENTER Ca SETUP PARENTAL P d N PARENTAL LEVEL gt e 6 Press SETUP to exit the menu
26. Play User can resume to playback from the part at which the play was stopped Virtual Surround Bit rate indication DRC Dynamic range control You can control the range of sound volume 6 EN OPERATING CONTROLS AND FUNCTIONS NOTE When you select DVD mode press PLAY gt or EJECT 4 first or insert a disc into the disc slot Otherwise the DVD features are not operated REMOTE CONTROL PICTURE SELECT 1 15 2 16 17 3 18 4 19 5 20 6 21 22 PAUSE 7 23 DISPLAY H 24 8 25 9 10 ee 11 27 12 28 13 29 Fig 1 1 POWER button P 11 P 18 Press to turn the power on and off 2 PICTURE button P 13 Press to adjust the picture 3 Number buttons P 11 P21 Press to select a desired channel number directly 100 button For TV mode Press to select channels higher than 99 10 button For DVD mode Press to enter desired numbers higher than 9 4 SLEEP button P 13 Press to set the Sleep Timer 5 SKIP I buttons P21 Press once to skip chapters tracks to a desired point 6 PLAY gt button P 18 Press to playback the disc 7 PAUSE IIl button P 19 Press to pause the current disc operation 8 DISPLAY button For TV mode P 14 Press to display
27. RACK ALL C oFF current track repeat entire disc repeat repeat off NOTE Repeat Track setting will be cleared when moving to other track Repeat playback does not function during A B repeat playback 23 SEARCH FUNCTION SPECIAL PLAYBACK FUNCTION PROGRAM RANDOM PLAYBACK You may determine the order in which tracks will play 1 In stop mode press MODE MODE Cues e The PROGRAM screen will appear 2 Press A or to select a track then press ENTER E b eren Ep Press CLEAR to erase the most recently entered track f the entire Program cannot be displayed at once on a screen Pl appears to go to the next page and 1 appears to go back to the previ ous page 3 Repeat step 2 until you have selected all the tracks you want to play in the program 4 Press PLAY gt to play the programmed tracks Ez PLAY NOTE While the program is being played back pressing STOP W works as follows e Press STOP once and then PLAY gt again playback will restart from the point where STOP W was pressed Program con tinued e Press STOP W twice and then PLAY gt gt again playback will restart from the track in the usual way Program canceled Up to 99 tracks can be entered To erase all tracks in the program at once select ALL CLEAR at the bottom
28. V PG TV 14 only BR L Coarse Language i gt CHANGE CODE eren S Sexual Situation Y V Violence NOTE TV RATING See A TV RATING SET UP The blocked sub ratings will appear next to MPAA RATING See B MPAA RATING SET UP the rating category in the TV RATING CHANGE CODE See C CHANGE ACCESS CODE menu 15 EN Tv OPERATION AND SETTINGS 6 Press SETUP to exit the menu PC NOTE change the rating the TV must be turned to an unprotected program If PROTECTED PROGRAM by appears on the screen please change the channel to a station that is not protected MPAA RATING SET UP Follow steps 1 to 3 in the V CHIP SET UP on page 15 4 Press A or v to point to your desired item then press ENTER to select BLOCK or VIEW BLOCK Rating Category Explanations S General Audience Parental Guidance suggested Unsuitable for children under 13 Restricted under 17 requires accompa nying parent or adult guardian NC 17 No one under 17 admitted X Mature audience only e When you select a rating and set it to BLOCK the higher ratings will be blocked automatically The lower ratings will be available for viewing When you set the lowest rating to VIEW all other ratings will automatically be available for viewing D Press SETUP to exit the menu Clos CHANGE ACCESS CODE Follow steps 1 to 3 in the V CHIP SET UP on page 15 EET 4 Press the Numb
29. a currently being read 4 Press DISPLAY again to exit pe VC 1 Press DISPLAY during playback to show the current Track For Audio CDs Current playback status us 4 12 0 03 21 0 02 15 GT gt Remaining time of the current track Elapsed time of the current track TR Track Current track number Total tracks 2 Press DISPLAY again to show current Total Track ALL Current track number Total tracks Current repeat setting appears only when the repeat setting is active T Track repeat A All Tracks repeat Ac B A B repeat Remaining time of the entire disc Elapsed time of the entire disc pr 4 12 0 13 45 0 45 40 GT gt 3 Press DISPLAY again to exit 2 NOTE When you are playing a disc in PROGRAM or RANDOM mode PROGRAM or RANDOMY will be displayed at step 2 27 EN CHANGING THE SETTINGS THE ON SCREEN INFORMATION CHANGING THE DVD SET UP ITEMS QUICK MENU ID LANGUAGE SETTING e You can select the TV MODE or DOLBY DIGITAL from the QUICK menu quickly To Follow steps 1 to 2 in the access the QUICK menu select QUICK T etes af ET at step 1 3 m A M E p the desired item en press TV SET UP MENU IN DVD MODE BR sce ENEEE e You can access the TV SETUP menu by press
30. aning description otherwise required in item 5 6 Attachments Do not use attachments not recommended by the unit manufacturer as they may cause hazards 7 Water and Moisture Do not use this unit near water for exam ple near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like PORTABLE CART WARNING 8 Accessories Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury to someone and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the unit Any mounting of the appliance should follow the manufac turer s instructions and should use a mounting accessory recom mended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn 9 Ventilation Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating and these openings must not be blocked or covered The open ings should never be blocked by placing the unit on a bed sofa rug or other similar surface This unit should never be placed near or over a radiator or heat register This unit should not be placed in a built in installation such as a bookcase or rack
31. as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Certain parts and LCD image burn in are not covered under this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by AN UNAUTHORISED SERVICE CENTER This limited warranty does not apply to any product not purchased and used in CANADA This warranty only covers failures due to defects in material or workmanship which occurs during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or product not supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of G
32. back press FWD gt gt or REV lt lt Ge gt gt e pp 1 or 441 appears on the screen 2 To select another speed repeat step 1 until your required speed number appears on the Screen For DVDs fast forward reverse search speed is different depending on the disc Approximate speed is 1 x2 2 x8 3 x20 4 x50 and 5 x100 For Audio CDs approximate speed is 1 x2 2 x8 and 3 x30 To return to normal playback press PLAY gt Ea PLAY SLOW FORWARD SLOW REVERSE ADD 1 During playback press PAUSE IM 2 Press FWD or REV lt lt Se m lei e 1 11 appears on the screen 3 To select another speed repeat step 2 until your required speed number appears on the Screen Slow forward or reverse speed varies with the disc Approximate speed is 1 1 16 2 1 8 and 3 1 2 To return to normal playback press PLAY gt GP PLAY 20 The Zoom function allows you to enlarge the video image and to pan through the enlarged image 1 Press ZOOM during playback Playback will continue 2 Press ZOOM repeatedly to select the required zoom factor ZOOM1 ZOOM2 ZOOMS or OFF Press a v lt or gt to move the zoomed picture across the screen E TE 9 4 To exit zoom mode press ZOOM to OFF NOTE Zooming function does not work while disc menu is shown Zooming func
33. ck 2 Press AUDIO repeatedly to select your desired language GC NOTE Pressing AUDIO may not work on some DVDs with multiple audio languages e g 1 Press SUBTITLE during playback SEE F SUBTLE a The subtitle language will appear on the display bar at the top of the TV screen 2 Press SUBTITLE repeatedly to select your desired subtitle language Gr ES 3 To turn off subtitles press SUBTITLE repeatedly until OFF appears G eS NOTE Pressing SUBTITLE may not work on DVDs which allow audio language setting on the disc menu STEREO SOUND MODE AGD 1 Press AUDIO repeatedly during playback to select between STEREO L ch or R ch E AUDIO gt STEREO STEREO Both right and left channels are active some DVDs with multiple subtitle languages In this case set it on the disc menu Operation varies between discs Refer to the manual of the disc e If the desired language is not shown after pressing SUBTITLE several times the disc does not have subtitles in that language When NOT AVAILABLE appears on the TV screen it means no subtitle is recorded on the scene 1 nor avarate e If you choose a language that has a 3 letter language code the code will be displayed every time you change the Subtitle language setting If you choose any other languages will be displayed instead Refer to page 31 25
34. d 2 Press POWER to turn on the unit POWER f oy m 3 Press CH A V to select the desired chan nel number res OR Press the Number buttons to enter the desired channel number lle NOTE For channel number selection with number buttons To select single digit channel number press 0 first e g Press 0 2 for channel 2 To select cable channels which are higher than 99 press 100 10 first e g Press 100 10 2 5 for channel 125 4 Press VOL A V to select the desired vol ume level c Press MUTE to instantly mute the sound Press it again to restore the previous volume level NOTE f you press CH A V in the DVD mode you can change the TV channels Even if you VOLUME 20 turn off the unit in the DVD mode when you turn it on again it will go into the TV mode TO WATCH CABLE OR SATELLITE CHANNEL If the unit is connected to a cable box or satellite box press CH A V to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device TO WATCH EXTERNAL INPUT When an external equipment is connected to AUDIO VIDEO input jacks on the right side press SELECT or CH A V repeatedly until VIDEO or VIDEO2 appears on the screen NOTE f a disc is inside the unit DISC INSIDE mes sage is displayed on the screen for 10 seconds DISC INSIDE To clear the messag
35. e instantly press CLEAR EN Tv OPERATION AND SETTINGS z ul CHANNEL SET UP AUTO CHANNEL PROGRAMMING As the initial setting this unit has memorized all channels including the ones not available in your area This feature automatically puts only available channels into the memory 1 Press SETUP then press A or v to point to CHANNEL SET TV SETUP Ny CHANNEL SET UP ETUP V CHIP SET UP gt gt LANGUAGE ENGLISH CAPTION N BACK LIGHT BRIGHT 2 Press ENTER then press A or v to point to AUTO PRESET CH awe Nu CHANNEL SET UP ADD DELETE CH CATV AUTO PRESET CH 3 Press ENTER s The tuner scans and memorizes all the active channels in your area The tuner stops on the lowest memorized channel NOTE When AUTO PRESET is activated where there is no TV signal input NO TV SIGNAL will appear on the display after the completion of channel scanning The unit may recognize CATV channels to be TV channels if reception condition is poor In this case check the antenna connection and try AUTO PRESET again when reception conditions are better Auto channel programming is NOT necessary when connected to a cable box or satellite box Just select the channel for cable box or satellite input ex CH3 or CH4 on the unit then select your desired channel on the cable
36. e of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the mod ifications are expressly approved in the owner s manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reason able protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful inter ference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation betw
37. ear If the feature is not available symbol may appear on the TV screen 2 Press A v lt or gt to select an item then press ENTER to confirm selection T9 Z N Ge CALLING MENU SCREEN DURING PLAYBACK Press DISC MENU to call up the DVD menu or press TITLE to call up the title menu NOTE Contents of menu and corresponding menu operations may vary between discs Refer to the manual accompanying the disc for details 19 DNDN AGD 1 During playback press STOP Resume ON GG Press PLAY to play from here To play the beginning press STOP first and then PLAY Resume message will appear on the TV screen 2 Press PLAY gt playback will resume from the point at which playback was stopped ET PLAY To cancel resume press STOP twice The resume information stays on even when the power is turned off 1 During playback press PAUSE Playback will pause and sound will be muted 2 To continue playback press PLAY gt ET STEP BY STEP PLAYBACK ADNDA 1 During playback press PAUSE Playback will pause and sound will be muted 2 The disc goes forward by one frame each time PAUSE II is pressed 3 To exit step by step playback press PLAY gt Gn OR PLAYING A DISC Z 2 W 77 e 2 2 FAST FORWARD FAST REVERSE ACD 1 During play
38. een the equipment and receiver 3 Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help b If liquid has been spilled or objects have fallen into the unit c If the unit has been exposed to rain or water d If the unit does not operate normally by following the oper ating instructions Adjust only those controls that are cov ered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation e If the unit has been dropped or damaged in any way f When the unit exhibits a distinct change in performance this indicates a need for service 20 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts speci fied by the manufacturer that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock injury to persons or other hazards 21 Safety Check Upon completion of any service or repairs to this unit ask the service technician to perform routine safety checks to determine that the unit is in proper operating condition 22 Heat This unit product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers t
39. eet of the unit Check if the correct mode is selected If not switch the mode by pressing SELECT whichever you need TV Mode Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities Before arranging for service check these items It could save your time and money PROBLEM CORRECTIVE ACTION No picture or sound Make sure the AC cord is connected to an AC outlet Check antenna connection Press SELECT to select TV mode Then try other TV feature Let the unit program its tuner memory No picture or poor picture on the Adjust direction or replace antenna unit Adjust picture controls Check for broken pin of the antenna cable No sound or poor sound Adjust volume control on remote control or main unit Press MUTE to restore sound Bars On Screen f outside antenna is being used check for broken wire Check for local interference Picture Distorted or Blurred Try a new channel if OK then possible station trouble f outside antenna is being used check for broken wire Picture Rolls Vertically Try a new channel if OK then possible station trouble Lines or Streaks in Picture f outside antenna is being used check for broken wire Check for local interference Try a new channel if OK then possible station trouble s antenna connected to jack on the back of the set f outside antenna is being
40. en there is no input from the unit for 5 minutes in stop mode 4 Press SETUP to exit the menu ETC INITIALIZE This allows you to return all selections of SETUP except for PARENTAL and menu language to their default settings 1 Press SETUP twice in stop mode so that the INITIALIZE menu appears 2 Press A or v to select INITIALIZE then press ENTER BR SETUP Fa gt onm eres X P INITIALIZE 3 Press A or v to select YES then press ENTER twice BR SETUP INITIALIZE CS gt ENTER twice x YES lt 2 All the settings except for PARENTAL and menu language will be cleared To cancel the initialisation select NO 4 Press SETUP to exit the menu GO 30 EN LANGUAGE CODE LIST Language Code Language Code Language Code Language Code A B Finnish FIN 5255 Lingala 5860 Shona 6560 Abkhazian 4748 French FRE 5264 Lithuanian 5866 Sindhi 6550 Afar 4747 Frisian 5271 Macedonian 5957 Singhalese 6555 Afrikaans 4752 Galician 5358 Malagasy 5953 6565 Albanian 6563 Georgian 5747 Malay 5965 Slovak 6557 Amharic 4759 German GER 5051 Malayalam 5958 Slovenian 6558 Arabic 4764 Greek GRE 5158 Maltese 5966 Somali 6561 Armenian 5471 Greenlandic 5758 Maori 5955 Spanish SPA 5165 Assamese 4765 Guarani 5360 Marathi 5964 Sundanese 6567 Aymara 4771 Gujarati 5367 Moldavian 5961 Swahili 6569
41. er buttons to enter your desired access code in the NEW CODE space then enter the same code in the CONFIRM CODE space When completed the menu will return to V CHIP SET UP NEW CODE XXXX CONFIRM CODE Make sure you enter exactly the same new code in the CONFIRM CODE space as one in the NEW CODE space If they are different the NEW CODE space is cleared for redoing 5 Press SETUP to exit the menu eas NOTE Your personal access code will be erased and will return to the default 0000 when a power failure occurs or when you turn off the power using a wall switch If you have for gotten the code unplug the power cord for 10 seconds to restore the access code to 0000 MENU LANGUAGE 1 Press SETUP then press A or v to point to LANGUAGE v RN CHANNEL SET UP V CHIP SET U CST SETUP gt gt gt LANGUAGE E ENGLISH C VA BACK LIGHT 4 2 Press ENTER repeatedly to select ENGLISH ESPANOL Spanish or FRANGAIS French GP 3 Press SETUP to exit the menu E CS NOTE This function effects only the language on the screen menu and not the audio source If for some reason the menu is in Spanish or French press SETUP press A or V to TV SET UP point to IDIOMA ESPANOL or LAN GAGE FRANCAIS then press ENTER repeatedly to select desired language then press SETUP 16 EN
42. er language code the code will be displayed every time you change the AUDIO or SUBTITLE language setting above If you choose any other languages will be displayed instead 3 letter language code is written in bracket CABLE CHANNEL DESIGNATIONS If you subscribe to cable TV the channels are displayed as 1 125 Cable companies often designate channels with letters or letter number combinations Please check with your local cable company The following is a chart of common cable channel designations CATV channel TV Display ATV channel TV Display CATV channel V Display ATV channel V Display CATV channel V Display CATV channe TV Display CATV channel TV Display CATV channe TV Display ATV channe TV Display CHANGING THE DVD SET UP ITEMS TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner s Manual check the unit con sulting the following checklist PROBLEM CORRECTIVE ACTION No power Make sure the power plug is connected to an AC outlet Make sure the power is turned on No operation by infrared remote Check if the power plug is connected to an AC outlet control Check the batteries in the remote control Aim the remote control directly at the remote sensor If necessary remove all the obstacles between the sensor and the remote control You have to be within 23 f
43. errors are listed below Automobile ignition noise Electric motor brush noise Weak snowy reception on TV screen Multiplex signal reception displaying picture ghosts or airplane flutter f the unit displays a black box on the TV screen this means that the unit is set to the TEXT mode To clear screen select CAPTION1 CAPTION or OFF 1 Press SETUP then press A or v to point to CAPTION TV SETUP NX CHANNEL SET UP SETUP V CHIP SET UP gt p LANGUAGE fENGLISH gt CAPTION OFF BN BACK LIGHT BaICHT 2 Press ENTER repeatedly to select the desired caption menu CAPTION1 CAPTION2 TEXT1 or TEXT2 TV SETUP CHANNEL SET UP IP SET UP V CHII LANGUAGE ENGIISH ENTER m CAPTION CAPTION1 BACK LIGHT BRIGHT If you select OFF Closed Caption System set ting is canceled 3 Press SETUP to exit the menu NOTE Even if there is a power failure of any kind the unit will retain its memory for this feature MTS Multi Channel Television Sound System TO SELECT TV SOUND MODE 1 Press AUDIO repeatedly to select the MTS output mode GE STEREO e The output mode changes as described below every time you press AUDIO STEREO gt SAP gt MONO ne Second Audio Program SAP Sometimes broadcasters add another channel of audio to the programs they air This is usual
44. f you need to replace these accessories please refer to the PART NO under the illustrations and call our help line mentioned on the front page Depending on your antenna system you may need different types of Combiners Mixer or Separators Splitter Contact your local electronics store for these items LOCATION For safe operation and satisfactory performance of your unit keep the following in mind when selecting a place for its installation The stand of this TV is fold ed when you purchased Place this TV face down on a flat surface covered with the soft cloth Bend the stand slowly to forward until it clicks If you want to fold the stand again insert a thin rod into the hole in the right side of the stand as illustrated bend the stand back ward while you keep pushing the hole Shield it from direct sunlight and keep it away from sources of intense heat Avoid dusty or humid places Avoid places with insufficient ventilation for proper heat dissipation Do not block the ventilation holes at the top or bottom of the unit Do not place the unit on a carpet because this will block the ventilation holes Install unit in a horizontal position Avoid locations subject to strong vibration Do not place the unit near strong magnetic fields Avoid moving the unit to locations where temperature differences are extreme Be sure to remove a disc and unplug the AC power cord from the outlet before carrying
45. ference 11 Grounding or Polarization This unit is equipped with a polar 3 Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug the unit from the wall outlet before clean ing Do not use liquid cleaners or aerosol cleaners Use a ized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug damp cloth for cleaning 12 Power Cord Protection Power supply cords should be EXCEPTION A product that is meant for uninterrupted ser vice and that for some specific reason such as the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged by the user for cleaning or any other routed so that they are not likely to be walked on or pinched by items placed upon or against them paying par ticular attention to cords at plugs convenience receptacles and the point where they exit from the appliance purpose may exclude the reference to unplugging the appliance 13 Outdoor Antenna grounding If an outside antenna or cable in the cle
46. hat produce heat LASER SAFETY This unit employs a laser Only a qualified service person should remove the cover or attempt to service this device due to possible eye injury CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUTION VISIBLE AND INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCK DEFEATED DO NOT STARE INTO BEAM LOCATION INSIDE NEAR THE DECK MECHA NISM This Class B digital apparatus complies with Canadian ICES 003 CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT A NOTE ABOUT RECYCLING Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations con cerning chemical wastes The serial number of this product may be found on the back of the unit No other unit has the same serial number as yours You should record the number and other vital information here and retain this book as a permanent record of your pur chase to aid identification in case of theft Serial numbers are not kept on file Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No Model No Serial No xa EN L3254CE p1 16 0X3 06 3 1 1 34 PM Page 4 9 SUPPLIED ACCESSORIES Remote Control Unit Batteries Owner s Manual NE240UD 2 AA Batteries IEMN21635
47. he disc Clean the disc Place the disc correctly with the label side up Cancel the parental lock or change the control level No sound Connect the audio cables firmly Turn the power of the audio component on Correct the audio output settings Correct the input settings on the audio component Distorted picture There are some cases where pictures may be slightly distorted which are not a sign of a malfunction Although pictures may stop for a moment this is not a malfunction Audio or subtitle language The selected language is not available for audio or subtitles on the angles This is not a malfunction Audio or subtitle language cannot The DVD does not contain audio source or subtitles in the selected Prohibited icon appears on the That operation is prohibited by the unit or the disc CD sound dropout Scratched disc Replace the disc with an unscratched one No CD reproduction DVD picture dropout DVD picture freeze DVD picture in mosaic No DVD reproduction Check if any disc is already in Disc cannot be taken out Unplug and plug again the power cord to the outlet and then press EJECT 4 Press and hold EJECT 4 on the unit for more than 5 seconds NOTE Some functions are not available in specific modes but this is not a malfunction Read the description in this Owner s Manual for details on correct operations Playback from a desired track and random
48. he wall mounted antenna jack with on RF cable commercially available a IF YOU HAVE A WIRED CABLE Connect the TV to the wired antenna cable NOTE from Cable Company or Satellite Antennna 5 A Axe RE Cable ef 7 Before plugging the antenna into the ANT jack of the unit check that the pin is not bent If it is bent straighten the pin as illustrated then plug the pin into the ANT jack of the unit E Bent pin EA E a Plug Needs to be Straight pin straightened CABLE SATELLITE BOX CONNECTION Rear of this unit WH EN SI N G CABLE B OX SAT ELLI T E BOX Cable Box If your cable service supplies you with a converter or Satellite Box box or if you use a satellite system you can use the basic connection shown above Channel selection must be made with the converter box or satellite box This means that channels cannot be changed using the remote control of this unit Coaxial Cable from Cable Company or Satellite Antenna NOTE Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical EXTERNAL CONNECTION You can connect this un
49. it to your own Audio Video equipment Be sure to turn off the power to all components in the system before connecting another component Refer to the Owner s Manuals for the equipment to be connected to the unit NOTE When you use the external input select VIDEO or VIDEO by pressing SELECT Refer to page 11 To use the VIDEO input jacks select VIDEO1 To use the VIDEO2 input jacks select VIDEO2 Use this connection if your own A V equipment e g VCR has Video output and Audio out jacks When using S Video cable better picture is available Audio Cable OUT Video Cable OUT S Video Cable OUT Video Cassette Recorder If your own equipment is monaural has only one Audio jack connect the Audio cable to AUDIO L jack of this unit f you connect Video jack and S VIDEO jack simultaneously the S VIDEO jack is given priority over the VIDEO jack VIDEO2 INPUT ex Use this connection if your own A V equipment e g SO video camera video game has Component Video Audio Cable OUT output Y Pb Pr jacks You can enjoy the best pic ture with this connection Video Camera G5 4f Component Video Cable OUT Video Game AUDIO OUTPUT You can enjoy DVD sound with more presence by connecting digital audio To coaxia
50. ized service providers without prior written approval To locate your nearest AUTHORISED SERVICE CENTER or for general service inquiries please contact us at FUNAI CORPORATION Customer Service Tel 1 800 242 7158 http www Symphonic us 19900 Van Ness Avenue Torrance CA 90501 Printed in China 1EMN21635 L3254CEK
51. l digita m equipment such as Dolby Digital decoder audio input jack COAXIAL petal Home Audio System ees Dolby Digital decoder NOTE The audio source on a disc in a Dolby Digital Multi channel surround format cannot be recorded as digital sound by an MD or DAT deck f connected to a Dolby Digital decoder set DOLBY DIGITAL to BITSTREAM for audio output in the setup mode Refer to page 29 Unless connected to a Dolby Digital decoder set DOLBY DIGITAL to PCM for audio output in the setup mode Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers Refer to page 29 Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 10 EN TV SECTION OPERATION AND SETTINGS POWER PICTURE SELECT C9 SLOW DISC PAUSE MENU DISPLAY L ON C4 C gt SETUP TTLE _ RETURN e Shaded buttons are used for following operation WATCHING A TV PROGRAM 1 Plug the power cord into a standard AC outlet NOTE e f any digits are displayed in the corner of the screen press POWER without unplugging the power cor
52. ly a secondary language or perhaps a radio station e After 5 seconds the current audio status will disappear from the TV screen NOTE The initial setting is STEREO This setting is saved even if the unit is turned off or the AC cord is unplugged TO CHECK THE SOUND STATUS By pressing DISPLAY the status shown below will appear on the display when you receive a broad cast on the unit tuner channel you are watching STEREO SAP 3 1 When a program is broadcast in stereo STEREO appears on the TV screen 2 When a program is broadcast in second audio SAP appears on the TV screen 3 When a program broadcast both in stereo and sec ond audio STEREO SAP appears on the TV screen 14 EN D C2 C3 EX TV RATING SET UP 4 5 6 Follow steps 1 to 3 in the V CHIP SET UP 7 8 9 E 4 Press A or v to select the desired TV rat SLEEP ET ing to be blocked then press ENTER repeat SKIP ZOOM MUTE edly to set BLOCK or VIEW e Co C22 gt ow Loo DISC PAUSE MENU 3 C Selection Rating Category Explanations DISPLAY Appropriate for all children Se uu Appropriate for children seven and older General Audience Parental Guidance suggested Unsuitable for children under 14 V CHIP SET UP NOTE V CHIP SET UP When you select a rating
53. ns are used for following operation TV mode the DVD mode shuts down first and then the TV picture and sound appears in about BASIC PLAYBACK 4 seconds Similarly when POWER is press to turn off in the DVD mode this mode shuts GETTING STARTED down first and then the unit is turned off may appear at the top right on the TV WT screen during operation warning that a pro Turn on the power of amplifier and any other compo hibited operation has been encountered by the nents if necessary DVD or the disc With DVDs that use titles for playback pro 1 Press POWER then the power will turn on gram signals playback may start from the POWER second title or it may skip these titles CF C During the playback of a two layered disc pictures may stop for a moment This happens 2 Open the disc door manually when the Ist layer switches to the 2nd layer This is not a malfunction 18 EN DISC MENU 1 Press DISC MENU GP amp The DVD main menu will appear If the feature is not available S symbol may appear on the TV screen f disc menu is available on the disc audio lan guage subtitle options chapters for the title and other options will appear for selection 2 Press v lt or gt to select an item and press ENTER to confirm selection es J X acc r TITLE MENU 1 Press TITLE Fo The title menu will app
54. od THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN CANADA ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORISED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORISED SERVICE CENTER THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT IF NO PROOF OF PURCHASE IS ATTACHED THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS To obtain warranty service you must take the product or deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection to any AUTHORIZED SERVICE CENTER FUNAI CORP will not reimburse you for any service done by unauthor
55. ress MODE to exit PS You can also exit the menu by pressing RETURN NOTE For CD play only Virtual Surround will not be effective if the sound mode is set to something other than STEREO Refer to STEREO SOUND on page 25 26 EN THE ON SCREEN INFORMATION DISPLAY lt 4 enter gt SETUP RETURN Cv e Shaded buttons are used for following operation You can check the information about the current disc by pressing DISPLAY ADV 1 Press DISPLAY during playback to show current Chapter For DVD Vs Angle icon appears only when avail able on the DVD Current playback status E 11 16 0 00 00 0 03 30 Remaining time of the current chapter Elapsed time of the current chapter CH Chapter Current chapter number Total chapters 2 Press DISPLAY again to show current Title zz 1 3 0 0000 12345 amp Remaining time of the current title Elapsed time of the current title TT Title Current title number Total titles 3 Press DISPLAY again zr mmm Layer numbers appears only when playing a two layered Disc L0 Layer 0 is playing L1 Layer 1 is playing Current repeat setting appears only when the repeat setting is active C Chapter repeat T Title repeat Ac B repeat BIT RATE The amount of audio and video dat
56. sc e On the following disc the sound MAY NOT be heard Super Audio CD NOTE Only the sound recorded on the normal CD layer can be delivered The sound recorded on the high density Super Audio CD layer cannot be delivered Any other discs without compatibility indications EN 17 ABOUT THE DISCS Z o 5 uw 77 e 2 PLAYING A DISC ICa C12 C2 C4 5 SLEEP 100 CD Co Go lt SKIP ZOOM Ce Con P5 PLAY REV FWD qp j DISC SLOW MENU 3 Insert a disc with the label facing back of the unit to start playing it By simply placing the disc gently into the slot it will be loaded automatically Playback will start from the first chapter track of the disc If the playback does not start automatically press PLAY gt When you playback a DVD which features a title menu it may appear on the screen In this case refer to TITLE MENU on page 19 Press STOP WI to stop playback ar D Press EJECT 4 to remove the disc from the unit PAUSE A DISPLAY uo UN C 9 eg gt SETUP N RETURN GN CLEAR SEARCHMODE REPEAT AB C MODE AUDIO SUBTILE ANGLE C49 LL TE Jg NOTE When the DVD mode has been switched to the Shaded butto
57. sed for following operation PICTURE CONTROL The unit s picture controls brightness contrast color tint and sharpness are preset to factory speci fications Although they are usually the best you may need to make some further adjustments for a more natural looking image 1 Press PICTURE then press A or v to select the desired control BRIGHTNESS CONTRAST COLOR TINT or SHARP NESS PICTURE d b dE ad E NN BRIGHTNESS Cy 2 Press 44 or gt to adjust to your desired level within 5 seconds E E BRIGHTNESS to increase brightness to increase contrast to brilliant to decrease brightness to decrease contrast to pale CONTRAST COLOR TINT SHARPNESS Even if there is a power failure of any kind the unit will retain its memory for this feature to purple to soft to green to clear 13 NOTE The picture control display will disappear automati cally after 10 seconds unless you press any buttons Magnetism from near by appliances and speakers might affect the color of TV picture If this hap pens press POWER to turn off the TV and turn it on again after about 30 minutes BACK LIGHT SETTING 1 Press SETUP then press a or v to point to BACK LIGHT TV SET UP CHANNEL SET UP SETUP V CHIP SET UP gt gt LANGUAGE ENGLISH CAPTION OFI gt BACK LIGHT BRIGHT
58. ssing the cover on the remote control unit in the direction of the arrow 2 Insert 2 AA penlight batteries into the bat tery compartment in the direction indicated by the polarity markings 3 Replace the cover NOTE BATTERY PRECAUTIONS Be sure to follow the correct polarity as indicated in the battery compartment Reversed batteries may cause damage to the device Do not mix different types of batteries together e g Alkaline and Carbon Zinc or old batteries with fresh ones f the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage Do not try to recharge batteries not intended to be recharged they can overheat and rupture We do not recommend the use of universal remote controls Not all of the functions may be controlled with a universal remote control If you decide to use a universal remote control with this unit please be aware that the code number given may not operate this unit In this case please call the manufacturer of the universal remote control EN PREPARATION FOR USE ANTENNA CABLE CONNECTION NOTE Cables used here are commercially available For your safety and to avoid damages to the unit unplug the antenna cable from the ANT jack before moving the unit ANTENNA CABLE CONNECTION IF YOU HAVE A JACK ON THE WALL Rear of this unit Connect the TV to t
59. the unit AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE Do not handle the power cord with wet hands Do not pull on the power cord when disconnecting it from an AC wall outlet Grasp it by the plug f by accident water is spilled on your unit unplug the power cord immediately and take the unit to our Authorized Service Center for servicing Do not put your fingers or objects into the unit disc slot Do not place anything directly on top of the unit Do not bend from this He 4 Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity If a DVD is played in a unit which has moisture it may damage the DVD and the unit Therefore when the condensation occurs inside the unit turn the unit on and allow at least 2 hours for the unit to dry out SYMBOLS USED IN THIS MANUAL The following symbols below appear in some head ings in this manual ADDN Description refers to playback of DVD video discs in the DVD mode Description refers to playback of Audio CDs in the DVD mode QUICK Description refers to the items to be set by the QUICK mode in the DVD mode TILT STAND You can adjust the stand to change the angle of the TV 5 to 10 5 o ss 9 M000 0000 EN TABLE OF CONTENTS
60. tion is not available on some discs It may take several seconds to slide the zoomed picture The picture may be distorted if you operate other functions repeatedly ex PAUSE IIl or REV lt lt etc in the zoom mode EN SEARCH FUNCTION 1 D 2 Within 30 seconds select the desired track CH number using the Number buttons 4 EN amp 7 8 G SLEEP 100 VOL 0 Gio C v SKIP ZOOM MUTE wn D To select single digit track number press 0 first if the total number of track in the disc is 10 ear or more e g Press 0 3 for track number 3 4 gt gt Playback will start at the selected track DISC PAUSE SLOW MENU Using SKIP 149 PP Ci aie DISPLAY t NS During playback press SKIP gt I to move the next CI CO ee track Press it repeatedly to skip subsequent tracks aaa ME v 4 mm Press SKIP I to go back to beginning of the cur GEN Le Press it repeatedly to go to the previous l C tracks If SKIP 44 PI is pressed while the play Shaded buttons are used for following operation back is paused the playback will be paused again after skipping to the next track NOTE TRACK SEARCH e SKIP 44 gt gt I are not operative when Aci playback is stopped There are three ways to begin playback on an Audio CD at a specific track TITLE
61. tism from nearby appliances and geomagnetism might affect the color of the TV picture Move the unit away from the appliances the unit can repair itself automatically If you want to repair immedi ately unplug the power cord then plug it in again 30 minutes later or so This automatically resets the unit POSSIBLE REMEDY Error committed by the closed captioning production company Possible in a live broadcast Not in case of a prerecorded program A few seconds of delay is common for live broadcast Display capacity may not exceed 220 words per minute If a dialogue exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialogue Caused by interferences of building power lines thunderstorms etc The broadcast may use a time compression process to speed up the program The decoder cannot read the compressed information and captions will be lost You are in TEXT mode Select a CAPTION mode C1 C2 or Caption OFF The LCD panel is manufactured to provide many years of useful life Occasionally a few non active pixels may appear as a fixed point of blue green or red This is not to be considered a defect in the LCD screen 33 DVD Mode PROBLEM CORRECTIVE ACTION No picture nsert a correct video disc that plays on this unit Press SELECT to select DVD mode then try other DVD feature Disc cannot be played nsert t
62. ult setting CF DISPLAY ENTER of the disc In this case set them by pressing bw A PARENTAL AUDIO and SUBTITLE Refer to page 25 Refer to the pages below to set up each item f you select a language that is not supported LANGUAGE See D LANGUAGE SETTING by the disc subtitle will automatically be set DISPLAY f See E DISPLAY SETTING OFF and the first item of the audio languages will be automatically set AUDIO See F AUDIO SETTINGS PARENTAL See G PARENTAL CONTROL OTHERS See H OTHER SETTINGS E DISPLAY SETTING Follow steps 1 to 2 in the 28 EN 3 Press A or v to select the below items then press ENTER BR SETUP DISPLAY E STL MODE um wes Nou TV MODE QUICK You can change certain aspects of the DVD display screens and on screen messages on the TV screen SETUP DISPLAY TV MODE 4 3 LETTER BOX STILL MODE AUTO 4 3 LETTER BOX default To show black bars on top and bottom of the screen 4 3 PAN amp SCAN show a full height picture with both sides trimmed STILL MODE This function allows you to adjust picture resolu tion and quality in the still mode DISPLAY TV MODE 4 3 LETTER BOX STILL MODE AUTO AUTO default Automatically select the best resolution setting FRAME or FIELD based on the data characteristics of the pictures
63. unless proper ventilation is provided or the manufacturer s instructions have been adhered to 10 Power Sources This unit should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home con Poe system is connected to the unit be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides infor mation with respect to proper grounding of the mast and sup porting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Fig A FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA at LEAD IN WIRE GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT gt lt GROUNDING CONDUCTORS NEC SECTION 810 21 gt cat GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEG NATIONAL ELECTRICAL CODE NEC ART 250 PART H 2898A EN 14 Lightning For added protection for this unit receiver during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and dis connect the antenna or cable system
64. will be compromised 7 You may play back the unfinalized DVD R RW disc recorded in the video format on our brand s DVD recorder However depend ing on the recording status of a disc the disc may not be played back at all or normally the picture or sound may not be smooth etc In this case you need to finalize the disc with the DVD recorder Refer to the manual accompanying the DVD recorder 8 Only the discs recorded in the video format and finalized can be played back Unfinalized discs cannot be played back Depending on the recording status of a disc the disc may not be played back at all or normally the picture or sound may not be smooth etc Q If there is too much recording space left on disc the used portion is less than 2 3 16 55mm across it may not play back properly 10 Do not glue paper or put stickers on to the disc These may damage the disc and the unit may not read it correctly 1 The number inside the symbol refers to a region of the world and a disc encoded in a specific region for mat can only be played back on unit with the same region code UNPLAYABLE DISCS NEVER play back the following discs Otherwise the unit may result in malfunction DVD RAM CD i Photo CD Video CD DVD with region codes other than 1 or ALL DTS CD DVD ROM for personal computers CD ROM for personal computers Never insert a disc which is broken or whose form is abnormal other than 5 inch 12cm round di
Download Pdf Manuals
Related Search