Home

Sylvania DVC840G DVD VCR Combo User Manual

1. Audio cable supplied Video cable S Video cable commercially Piet available Component Video cable commercially available AUDIO S VIDEO COMPONENT AUDIO SVIDEO COB NENT VIDEO OUT VII OUT DIGITAL AUDIO S VIDEO AUDIO OUT OUT OUT 2 O VCR VIDEO OUT e VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT Analog Hint e Connect this unit directly to the TV If the Audio Video cables are connected to a VCR pictures may be distorted due to the copy protection system e The COAXIAL DVD AUDIO OUT S VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture You must select the connection Method 3 above and progressive scanning mode To set the mode set PROGRESSIVE to ON in the SETUP menu so that the PROGRESSIVE SCAN indicator on the front panel lights on See pages 20 to 21 for more details e When PROGRESSIVE is ON video signals from the units VIDEO OUT and S VIDEO OUT jacks will be distorted or not be output at all If your TV is not compatible with progressive scanning Use this unit in interlace mode and set PROGRESSIVE to OFF either in the SETUP menu or by pressing and holding PLAY gt on the front of the unit for more than 5 seconds so that the PROGRESSIVE SCAN indicator
2. 13 EN VCR Functions suonouny HOA Copying a Video Tape Warning Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws Back of TV Back of another source Back of DVD VCR AUDIO OUT OUT supplied Audio Video cables Front input jacks are also available commercially available 1 Insert a pre recorded tape into another VCR for playing 7 To stop recording press STOP EJECT MW 4 on the 2 Insert a tape with its record tab into this unit for recording recording unit then stop playback of the tape in another 3 Press SPEED on the remote control of the recording source unit to select the desired recording speed SP SLP Hint a Selectie E pe eS PORNON ON IE te oreng unin e For best results during dubbing use the front panel controls whenever pos e To use the input jacks on the back of this unit select sible The remote control might affect another source s operation L1 position by pressing 0 0 1 on the remote e Always use video quality shielded cables with RCA type connectors Standard control or CHANNEL a v on this unit audio cables are not recommended e To use the input jacks on the front of this unit select e You can use a video disc player satellite receiver or other audio video L2 position by pressing 0 0 2 on the remote component with Audio Video outputs control or CHANNEL A v on this unit e L1 or L2 is found
3. e This function is available only on digital outputting of a disc recorded in 96kHz EN D PARENTAL Setting Parental Control limits the disc viewing that exceed your settings An incorrect password will not be acceptable This feature prevents your children from viewing inappropriate materials Parental Levels Parental Level allows you to set the rating levels of your DVD discs Playback will stop if the ratings exceed the levels you set Follow steps 1 to 3 in the CUSTOM Menu section on page 20 4 Enter your desired four digit password O YY D O y Q PARENTAL menu If you have set a password already enter the current four digit password 5 Select 6 Select the 7 Toexit PARENTAL LEVEL desired level the menu gt SETUP ENTER ALL PARENTAL LEVEL PASSWORD CHANGE 8 ADULT 7 Neta 6 R CONTROL LEVELS e ALL All parental locks are cancelled e Level 8 DVD softwares of any grades adult general children can be played back e Levels 7to2 Only DVD softwares intended for general use and children can be played back e Level 1 Only DVD softwares intended for children can be played back with those intended for adult and general use prohibited TIPS FOR LEVELS e 8 ADULT DVD software of any grades adult general children can be played back e 7 NC 17 No one under 17 admitted e 6 R Restricted under 17 requires accompanying parent or adult guardian e 5 PGR Parental
4. HOUR MINUTE AM PM 3 Select the current day Then press gt to go to next step A ee HOUR MINUTE AM PM or gt see wakes __ 4 Select the current year CLOCK SET MONTH DAY YEAR Then press gt to go to next step 10 02 20 6 Or OFrO 5 Select the current hour Then press gt to go to next step Or OFrO 6 Select the current minute Then press gt to go to next step YV D gt 2 7 Select AM or PM QDD CLOCK SET HOUR MINUTE AM PM CLOCK SET MONTH DAY YEAR 10 02 MON 2006 HOUR MINUTE AM PM 0 5T CLOCK SET MONTH DAY YEAR 10 02 MON 2006 HOUR MINUTE AM PM 0 5 540 CLOCK SET MONTH DAY YEAR 10 02 MON2006 HOUR MINUTE AM PM 05 40 P M AM gt PM 8 To exit the CLOCK SET screen EN Quick Use Guide 6 VCR Playback Before Turn on the TV and set it to channel 3 Alphabetical order e If channel 3 has been already eTo select chapter or title occupied for broadcasting see RF directly Output Channel section DVD mode VCR mode e To select channel e The 10 button has no effect in VCR mode e To select track directly e To search forward back ward through a disc eTo search forward backward e To forward backward a eTo begin slow forward reverse through a disc tape playback in the pause mode 1 Inserta video a To start O eTo repeat between your To repeat ae al chosen cassette into this un
5. For Customer Use Read carefully the information located at the back of this unit and enter below the Model No and the Serial No Retain this information for future reference Model No Serial No IMPORTANT SAFEGUARDS 5 A e pP 10 11 12 13 Read Instructions All the safety and operating instruc tions should be read before the appliance is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug this video product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning EXCEPTION A product that is meant for uninterrupted service and that for some specific reason such as the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged by the user for cleaning or any other purpose may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5 Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards Water and Moisture Do not use this video product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a
6. GAC Video or color fades in e You cannot copy a copyrighted video tape You are experiencing copy guard protection and out when making a copy of a video tape Cannot remove the tape e Check if this unit is in the VCR mode If not press VCR on the remote control to switch the mode No picture e Connect the video cable firmly e Insert a correct video disc that plays on this unit e Press DVD on the remote control Check if the DVD OUTPUT light is lit Then try other DVD features e Set PROGRESSIVE correctly Turn it on only if your TV has progressive scan and you are using the Component Video connections between the unit and the TV Disable progressive scan for all other connections See page 7 Disc cannot be played e Insert the disc e Clean the disc e Place the disc correctly with the label side up e Cancel the parental lock or change the control levels e Handle a disc with special care so that it does not have fingerprints scratches or dusts on its surface No sound e Connect the audio cable firmly e Turn the power of the audio component on e Correct the audio output settings e Correct the input settings on the audio component Distorted picture e Connect this unit directly to the TV e There are some cases where pictures may be slightly distorted and those are not a sign of a malfunction e Although pictures may stop for a moment this is not a malfunction e Check if the INTERLACE PROGRESSIVE mode correctly a
7. TY o m 3 m D 0 20 0 O O Q Q O is m N Q O z o Si a fe e To reset the tape counter e T og uE 3 f m Uv O gt 0000 0000 0000 0000 Hint e Do not mix alkaline and manganese batteries e Do not mix old and new batteries VCR Functions Playback Before Turn on the TV and set it to channel 3 e If channel 3 has been already occupied for broadcasting see RF Output Channel section on page 6 Insert a video cas 2 To start playback sette into this unit o ia m m o CL D SS 00000 3 To stop playback 4 To eject the cassette lt re lo OPEN CLOSE EJECT Other Operations To cue or review picture during playback Picture Search Use P gt or F FWD gt gt or REW lt lt e Press it again and the unit will search in super high speed in the SLP mode only To freeze the picture on TV screen during playback Still mode Press PAUSE II Each time you press the button the picture will be forwarded by one frame e f the picture begins to vibrate vertically in the still mode stabilize the picture by using SKIP CH gt A Ht 4 v or CHANNEL aA v elf the picture is distorted or rolling vertically adjust the vertical hold control on your TV if equipped Hint Hint e When a tape with orewc 0se out record tab is AN inserted the unit will start playba
8. Timer Recording 4 FP n ENS KES e Insert a tape with its record tab into the unit 4 Select the desired date 1a Then press gt to go to next step Press MENU then select TIMER PROGRAMMING 1 MENU TIMER PROGRAMMING or Saeki de 4 gt TIMER PROGRAMMING PROG 12345678 En a pi AUTO REPEAT OFF DATE CHANNEL SET UP END TIME CLOCK SET eas DE CHANNEL a LANGUAGE SELECT REC SPEED CHANNEL REC SPEED PA gt Available program number flashes l e You can set a program one year in advance 2 Select an empty program number PROGRAM NUMBER gt 1 Then press gt to go to next step START TIME 5 Select the desired start time hour END TIME CHANNEL Then press gt to go to next step 4 A ONE TIME PROGRAM EAS EEE or PROGRAM NUMBER 1 7 DATE 10 2 3 MON 3 Select ONCE DAILY Mon Fri or WEEKLY START TIME 0723 0 END TIME Then press gt to go to next step PROGRAM NUMBER 1 REC SPEED gt ONCE DAILY Q gt Q dd Q gt Q EN 6 Select AM or PM 10 Press SUBTITLE T SET to set timer standby mode Then press gt to go to next step ONE TIME PROGRAM MA PROGRAM NUMBER 1 DATE 10 23MON START TIME 07 30 PM END gt TIME A or Q gt Q CHANNEL Ur on the front panel lights up The unit will change to the AM D mode gt PM Ss Hint 7 Repeat the procedure in steps 5 and 6 to set the end ti
9. Black Level Setting J Press MODE during playback MODE LN gt O ENTER ON Makes the dark areas brighter OFF Shows the original picture as recorded 3 Press RETURN lt to exit RETURN Stereo Sound Mode pa This unit allows you to select a sound mode during CD playback Y Press AUDIO during CD playback AUDIO ON AN gt OD Each time you press AUDIO sound mode changes as example below 2 Press ENTER to adjust the black level STEREO STEREO right and left channels are active L ch left channel is active R ch right channel is active Virtual Surround You can enjoy stereophonic virtual world on your existing 2 channel stereo system Y Press MODE twice once for CD and MP3 WMA during playback VODE gt O 2 Press ENTER for the desired effect ENTER 1 Natural effect 2 Emphasized effect OFF No effects original sound 3 Press RETURN to exit CE 1 RETURN Hint For CD play back only e Virtual Surround will not be effective if the sound mode is set to something other than STEREO Refer to Stereo Sound Mode e When playing back 96kHz with Virtual Surround function the sound will be down sampling at 48kHz and output as digital audio DVD Setup You can select the PLAYER MENU TV ASPECT PROGRESSIVE or DOLBY DIGITAL from the QUICK SETUP menu quickly 7 Press SETUP in the stop mode 2 S
10. Guidance Recommended e 4 PG13 Unsuitable for children under 13 e 3 PG Parental Guidance suggested e 2 G General Audience e 1 KID SAFE Suitable for children Hint e DVD Video discs may not respond to the parental lock settings Make sure this function works with your DVD Video discs To Change the Password for Parental Controls You can change your password for parental controls Follow steps 1 to 3 in the CUSTOM Menu section on page 20 4 Enter current four digit password O O y Sd Q PARENTAL menu a a 0 as PARENTAL MM Enter current password Vw BOOd Be E OTHERS Setting 5 Select PASSWORD 6 Enter your new CHANGE Loe PARENTAL LEVEL ALL PASSWORD CHANGE except for 4737 QO Q UU Q PASSWORD Please enter a 4 digit password Bodo four digit password Z To exit the menu SETUP Hint e Record the password in case you forget it e f you forget the password press 4 7 3 7 at step 4 then enter your new password Password will be cleared and parental levels will be set to ALL 4 Select the desired item GID OTHERS menu poggas ON AUTO POWER OFF ON You can change the other functions Follow steps 1 to 3 in the CUSTOM Menu section on page 20 SD ANGLE ICON Default ON Set to ON to show the angle icon when multiple camera angles are available during DVD playback ANGLE ICON ON OFF AUTO P
11. Recordable DVD is a trademark of DVD Format Logo Licensing Corporation If you cannot play back a disc which bears one of the marks above check the following notes 1 This unit conforms to the NTSC color system Discs recorded in other color systems such as PAL cannot be played back 2 Certain DVD Video discs do not operate as described in this manual due to the intentions of the disc s producers 3 Scratched or stained discs may not be played back 4 Some discs cannot be played back because of incompatible recording conditions characteristics of the recorder or spe cial properties of discs 5 You can play back discs which bear the marks above If you use nonstandardized discs this unit may not play them back Even if they are played back the sound or video quality will be compromised 6 You may play back the unfinalized DVD R RW disc recorded in the video format on our brand s DVD recorder However depending on the recording status of a disc the disc may not be played back at all or normally the picture or sound may not be smooth etc In this case you need to finalize the disc with the DVD recorder Refer to the manual accompanying the DVD recorder 7 Only the discs recorded in the video format and finalized can be played back Unfinalized discs cannot be played back Depending on the recording status of a disc the disc may not be played back at all the picture or sound may not be smooth etc 8 If the rec
12. The Auto Repeat playback will start automatically if you set AUTO REPEAT to ON in the stop mode Recording Recording amp OTR One Touch Recording Before Turn on the TV and set it to channel 3 e If channel 3 has been already occupied for broadcasting see RF Output Channel section on page 6 Accidental erasure prevention 3 Press SPEED to select the desired tape speed gt To prevent accidental recording on a recorded CA cassette remove its record tab To record on 7 paa S it later cover the hole with adhesive tape Ea als Tape Speed Recording Playback Time Type of tape T120 T160 SP 2 2 3hours i SP mode You CAN NOT dub a DVD to a videotape To stop recording temporarily Pause mode 4 Press REC OTR repeatedly to select the desired recording length Press PAUSE II RECIOTR e During the rec pause mode five IE marks appear on the TV screen Each E O REC gt OTR 0 30 gt OTR 1 00 mark represents one minute ees 2 e Press it again to resume recording a eee e Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head Hint e If you want to watch one channel while recording another 1 Press VCR TV to put the unit in TV position 2 Select a channel you want to watch with the cable box or the satellite box 5 To stop recording 6 To eject the recorded cassette OPEN CLOSE EJECT
13. VCR TV en el mando a distancia 4 Pulse una vez PLAY gt 5 Despu s de unos segundos pulse PLAY gt en la uni dad durante 3 segundos e El canal de salida RF cambiar del canal 3 al canal 4 y podr ver una imagen reproducida e Cuando no aparezca una imagen en la pantalla del televi sor repita el paso 4 6 Pulse STOP W para parar la reproducci n 2 Instalacion de las pilas del control remo Bot n VCR Bot n DVD Luz DVD OUTPUT Boton OUTPUT Luz VCR OUTPUT MODO VCR Pulse VCR en el control remoto Compruebe que esta encen dida la luz VCR OUTPUT MODO DVD Pulse DVD en el control remoto Compruebe que esta encen dida la luz DVD OUTPUT Consejo e Si pulsa s lo OUTPUT en el panel frontal NO cambia el modo del control remoto DEBE seleccionar tambi n el modo correcto en el control remoto 4 Activacion de la unidad por primera vez EAS Encienda el televisor y sintonice al canal 3 e Si el canal 3 se est utilizando para una transmisi n vea la secci n RF Output Channel 2 LANGUAGE SELECT POWER gt ENGLISH ON D gt D D gt O 3 Pulse gt para AJUSTE AUTO OAO AJUSTE AUTO Conecta el cable de la caja de canales de cable o la caja de sat lite en la toma ANT IN de la unidad VO Si Pulse MENU para salir Y No Espere unos minutos Despu s del escaneo e El sintonizador se detiene en el canal memoriz
14. a la operaci n Para volver a la operaci n previa en previa en el men el men SEARCH e Para buscar un capitulo e Para buscar una canci n t tulo u hora Para buscar la hora CD e Para llamar el men de e Para colocar o buscar los e Para colocar o buscar los b squeda de ndice u hora marcadores marcadores CD O e Para llamar el men de e Para llamar el men de programaci n POWER precios programaci n de DVD de DVD e Para encender o apagar la unidad a oO m m o gt iS 2 o 000G 92 SKIP CH e Para cambiar de canal D 4 wy e Para saltar cap tulos o titulo Para saltar canciones e Para ajustar manualmente elseguimiento i S durante la reproducci n vy O O e Para ver la cinta en c mara Q Q lenta 2 3 2 z lt e 3 z 5 2 Z 5 a A 9 o 4 O e Para seleccionar la velocidad de grabaci n o e Para parar la reproducci n e Para parar la reproducci n Aiaia la reproducci n o SUBTITLE e Para poner la grabadora de id e Para seleccionar subt tulos v deo en el modo de espera ooo en un disco para una grabaci n con 3 oO o o temporizador MODE zom Se SERS OO MENU e Para volver al archivo superior de la e Q Q Bele o a mena jerarqu a m s alta en el programa y P en la lista de archivo MP3 WMA e Para seleccionar el modo de salida de la grabadora de video e Para activar el mando a distancia en el modo d
15. any kind on the video product Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product If the video product has been exposed to rain or water d If the video product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation e If the video product has been dropped or damaged in any way f When the video product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this video product ask th
16. before the lowest memorized channel Example CH02 5 Press REC OTR on the recording unit e L2 input jacks are on the front of this unit 6 Begin playback of the tape in another source 14 EN DVD Functions Playback Before Turn on the TV amplifier and any other components which are connected to this unit Make sure the TV and audio receiver commercially available are set to the correct channel a D pan POWER OPEN CLOSE J B Cc iD l E amp PEE DIO EJECT i a o gt OO C CA A rage 16 SSR DOOO 2 Insert a disc with label facing up lt e o e lt o e OPEN CLOSE EJECT O gt e When you play an MP3 WMA file details on page 16 e A prohibited icon may appear at the top right on the TV screen when the operation is prohibited by the disc or this unit e Some DVDs may be played from title 2 or 3 due to specific programs e During the playback of a two layered disc pictures may stop for a moment This happens while the 1st 3 To start playback playback TIP DVD menu Some discs contain menus which allow you to customize DVD playback Press A V 4 gt to select an item then press ENTER or PLAY Calling up a Menu Screen during Playback e Press MENU to call up the DVD menu e Press TOP MENU to call up the title menu Hint e Menu operations may vary depending on the disc Refer to the manual acco
17. either the disc tray is open or power is turned off e To repeat the current track in the program press REPEAT repeatedly until 5 TRACK appears during playback e To repeat the entire program press REPEAT repeatedly until IG ALL appears during playback EN Special Settings Subtitle Language eS This unit allows you to select a subtitle language if available during DVD playback 1 Press SUBTITLE T SET during playback SUBTITLE O 1 ENG one T SET LENG i Each time you press SUBTITLE T SET subtitle language changes as example below OFF no subtitles ENG English subtitles FRE French subtitles To set subtitle ON OFF J Press SUBTITLE T SET during playback SUBTITLE 2 Press gt to select subtitle ON or OFF OFF Hint e If your language is not shown after pressing SUBTITLE T SET several times the disc may not have that language However some discs allow subtitle lan guage setting on the disc menu Operation varies depending on the discs so refer to the manual along with the disc e When NOT AVAILABLE appears on the TV screen it means no subtitle is recorded on the scene e If you choose a language that has a three letter language code the code will be displayed every time you change the subtitle language setting If you choose any other languages will be displayed instead Refer to page 24 e Some discs will only allow you to chan
18. inside the cabinet call a qualified dealer or an Authorized Service Center e Be sure to remove disc and video tape and unplug the AC power cord from the output before carrying this unit Avoid the Hazards of Electrical Shock and Fire e Do not handle the power cord with wet hands e Do not pull on the power cord when disconnecting it from AC wall outlet Grasp it by the plug elf by accident water is spilled on this unit unplug the power cord immediately and take the unit to our Authorized Service Center for servicing e Do not put your fingers or objects into the unit cassette holder Moisture Condensation Warning Moisture may form inside this unit under the following condi tions e Immediately after a heater is turned on eIn a steamy or humid room e When this unit is suddenly moved from a cold to warm envi ronment If moisture forms inside this unit it may not operate properly or damage the video tape In such case turn on the power and wait for more than 2 hours for the moisture to evaporate About Copyright Unauthorized copying broadcasting public performance and lending of discs are prohibited This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macro
19. of the title or track is less than 10 minutes e Press CLEAR C RESET to erase the incorrect input at step 2 Marker Setup This feature allows you to assign a specific point on a disc to be called back later To set a marker 7 Press SEARCH MODE repeatedly until the marker display appears E AOS 2 Select a marker A al elaac m 1 a a or mr 3 Press ENTER ENTER To return to the marker later 1 Press SEARCH MODE repeatedly until the marker display appears pa creena RAVER aise o 1 0 12 01 SEARCH MODE 2 Select the marker DD 3 Press ENTER at the desired marker EAyalsasls7elelmac 1 0 12 01 Eyasar7elalnac Md 1 0 12 01 ENTER Mirra O Md 1 0 12 01 To exit the marker screen 1 Press RETURN RETURN Hint e The Marker display will disappear in about 30 seconds when there is no output e To clear a marker select the marker to be cleared at step 2 in the section To set a marker or To return to the marker later and then press CLEAR C RESET e Opening the disc tray or turning off the power will erase all markers e Selecting AC at step 2 in the section To set a marker or To return to the marker later will also erase all markers Repeat Random Programmed Playback Repeat Playback Repeat function is available only during playback 1 Press RE
20. on the front panel lights off After you have completed connections Press the input selector button usually TV VIDEO INPUT or AUX on your TV to switch an appropriate external input channel usually near channel 0 for viewing the picture from this unit If the picture does not appear also refer to the manual accompa nying your TV INPUT MODES FOR COMMON TV BRANDS Listed below are inputs for common brand name TV s Admiral AUX Panasonic TV VIDEO Curtis Mathis LINE1 LINE2 00 90 91 92 93 RCA INPUT TV VCR 00 90 91 92 93 GE INPUT TV VCR 00 90 91 92 93 Samsung TV VIDEO Hitachi INPUT AUX Sanyo VIDEO JVC VIDEO VIDEO1 VIDEO2 VIDEO3 Sharp 00 Kenwood AUX Sony VIDEO1 VIDEO2 VIDEO3 LXI Series 00 Toshiba TV GAME Magnavox AUX CHANNEL Zenith 00 Preparation for Use Turn On the Unit for the First Time j To Preset the Channel Again O o o Operation described in this manual are IAS a a a a eee Sic 2 Select CHANNEL SET UP by using a then press gt A A A 3 Select AUTO SET UP by using a v then press gt Turn on the TV and set it to channel 3 After scanning the tuner stops on the lowest memorized e If channel 3 has been already occupied for broadcasting chamnel see RF Output Channel section on page 6 E 2 Select your language in the first time you turn on this unit An A O AAA Change the On Serben Lan ua Then press T
21. swimming pool and the like Accessories Do not place this video product on an unstable cart stand tripod bracket or table The video product may fall causing serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the video product Any mount ing of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appli ance and cart combination to overturn Ventilation Slots and openings in the cabinet are pro vided for ventilation and to ensure reliable operation of the video product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the video product on a bed sofa rug or other similar surface This video product should not be placed in a built in installa tion such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Power Sources This video product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For products intended to ope
22. 4961 Kazakh 5757 S Uzbek 6772 Croatian 5464 Kinyarwanda 6469 Samoan 6559 Vietnamese 6855 Czech CZE 4965 Kirghiz 5771 Sangho 6553 Volapuk 6861 Danish DAN 5047 Kirundi 6460 Sanskrit 6547 Welsh 4971 Dutch DUT 6058 Korean KOR 5761 Scots Gaelic 5350 Wolof 6961 English ENG 5160 Kurdish 5767 Serbian 6564 Xhosa 7054 Esperanto 5161 L N Serbo Croatian 6554 Yiddish 5655 Estonian 5166 Laothian 5861 Sesotho 6566 Yoruba 7161 F H Latin 5847 Setswana 6660 Zulu 7267 Faroese 5261 Latvian Lettish 5868 Shona 6560 Fiji 5256 Lingala 5860 Sindhi 6550 Finnish FIN 5255 Lithuanian 5866 Singhalese 6555 If you choose a Language that has a 3 letter language code the code will be displayed every time you change the Audio or Subtitle language setting on page 19 If you choose any other languages will be displayed instead 3 letter language code is written in bracket SYLVANIA LIMITED WARRANTY FUNAI CORP will repair this product free of charge in the USA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Certain parts are excluded from this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS This warranty is extended only to the original retail purchaser A purchase r
23. AY To use SKIP I lt lt REV gt i SKIP FWD on this unit Press and hold to change forward or reverse playback speed To continue playback press PLAY gt Hint e For DVDs fast forward or reverse search speed is different depending on the disc Approximate speed is 1 x2 2 x8 3 x20 4 x50 5 x100 e For Audio CDs and MP3 WMA approximate speed is 1 x2 2 x8 3 x30 Slow Forward Reverse Press lt lt or gt gt repeatedly in the pause mode to select the required forward or reverse speed To continue playback press PLAY To use SKIP I lt lt REV gt gt SKIP FWD on this unit Press and hold in the pause mode to change forward or reverse playback speed To continue playback press PLAY Pb Hint e Slow forward or reverse speed is different depending on the disc Approximate speed is 1 1 16 2 1 8 3 1 2 e Set STILL MODE to FIELD in the DISPLAY menu if pictures in the slow playback mode are blurred Refer to pages 20 21 Y 1 Press ZOOM during playback 2 Press ZOOM repeatedly to select the required zoom factor x2 x4 or OFF 3 Press A vw gt to slide the zoomed picture across the screen 4 To exit zoom mode press ZOOM to select OFF Hint e Zooming function does not work while the disc menu is showing up e x4 zoom is not available on some discs e lt may take several seconds to slide the zoomed pic
24. Approx 6 0lbs 2 7kg Language Code Language Code Language Code Language Code A B French FRE 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali 6561 Albanian 6563 German GER 5051 Maltese 5966 Spanish SPA 5165 Amharic 4759 Greek GRE 5158 Maori 5955 Sundanese 6567 Arabic 4764 Greenlandic 5758 Marathi 5964 Swahili 6569 Armenian 5471 Guarani 5360 Moldavian 5961 Swedish SWE 6568 Assamese 4765 Gujarati 5367 Mongolian 5960 T Aymara 4771 Hausa 5447 Nauru 6047 Tagalog 6658 Azerbaijani 4772 Hebrew 5569 Nepali 6051 Tajik 6653 Bashkir 4847 Hindi 5455 Norwegian NOR 6061 Tamil 6647 Basque 5167 Hungarian HUN 5467 O R Tatar 6666 Bengali Bangla 4860 l K Occitan 6149 Telugu 6651 Bhutani 5072 Icelandic ICE 5565 Oriya 6164 Thai 6654 Bihari 4854 Indonesian 5560 Oromo Afan 6159 Tibetan 4861 Bislama 4855 Interlingua 5547 Panjabi 6247 Tigrinya 6655 Breton 4864 Interlingue 5551 Pashto Pushto 6265 Tonga 6661 Bulgarian 4853 Inupiak 5557 Persian 5247 Tsonga 6665 Burmese 5971 Irish IRI 5347 Polish POL 6258 Turkish TUR 6664 Byelorussian 4851 Italian ITA 5566 Portuguese POR 6266 Turkmen 6657 C E Japanese JPN 5647 Quechua 6367 Twi 6669 Cambodian 5759 Javanese 5669 Rhaeto Romance 6459 U Z Catalan 4947 Kannada 5760 Romanian RUM 6461 Ukrainian 6757 Chinese CHI 7254 Kashmiri 5765 Russian RUS 6467 Urdu 6764 Corsican
25. E menu some discs SUBTITLE 1 2 sme e If OTHER is selected in the AUDIO O u yl Default OFF SUBTITLE or DISC MENU screen press ENGLISH digi Sets the subtitle language i four digit number to enter the code for the ORIGINAL desired language Refer to the language DISCMENU ENGLISH DISC MENU 1 DISCMENU code list on page 24 PLAYER MENU ENGLISH Default ENGLISH Only the languages supported by the disc Sets the language in SPANISH can be selected DVD menu 2 PLAYER MENU EW ELAVERMENU e Language setting for Audio and Subtitle are Default ENGLISH oe not available with some discs Then press Sets the language for the ESPANOL AUDIO and SUBTITLE T SET Details On Screen Display are on page 19 20 gt EN DISPLAY Setting You can change the display functions Follow steps 1 to 3 in the CUSTOM Menu section on page 20 4 Select the desired item QQ DISPLAY menu TV ASPECT 4 3 LETTER BOX CH STILL MODE AUTO PROGRESSIVE OFF TV ASPECT e Select 4 3 LETTER BOX so that black bars may appear on the top and bottom of the screen e Select 4 3 PAN amp SCAN for a full height picture with both sides adjusted e Select 16 9 WIDE if a wide screen TV is connected to this unit PROGRESSIVE e You can set PROGRESSIVE to OFF in the DISPLAY menu or press and hold PLAY on the front of the unit for more than 5 seconds during playback so t
26. MP3 WMA file recorded in Variable Bit Rate VBR the unit may not display the actual elapsed time e Copyright protected WMA files will not play on this unit You can check the information about the current disc by pressing DISPLAY on the remote control Angle icon appears only in a case multi angel is available on the DVD Current playback status Remaining time of the current chapter Elapsed time of the current chapter CH Chapter Current chapter number Total chapters Remaining time of the current title Elapsed time of the current title TT Title Current title number Total titles DISPLAY Layer numbers appears only when playing a two layered disc LO Layer 0 is playing L1 Layer 1 is playing Current repeat setting appears only when the repeat setting is active G C Chapter repeat G T Title repeat AG B A B repeat BIT RATE The amount of audio and video data currently being read NOTE For WMA files and will be displayed after 7 Title name based on tag information currently in play will be displayed Artist name based on tag information currently in play will be displayed Current playback status Remaining time of the current track Elapsed time of the current track TR Track y Curen ick number Total tracks ALL Current track number Total tracks Current repeat setting if active G T Track repeat G A All Tracks repeat AG B A B repeat Remaining ti
27. N SAMPLING Default ON Set to ON when outputting in 48kHz Set to OFF when outputting the original sound A ON DOWN SAMPLING ON OFF DOLBY DIGITAL BITSTREAM BITSTREAM DOLBY DIGITAL Default BITSTREAM Set to BITSTREAM when the unit is connected to a Dolby Digital decoder e BITSTREAM Outputs a Dolby Digital Signals e PCM Convert the Dolby Digital into PCM 2 channel DRC ON DOWN SAMPLING ON DOLBY DIGITAL _ BITSTREAM 6 To exit the TV ASPECT or STILL MODE screen To complete the PROGRESSIVE setting ENTER Hint STILL MODE e Select AUTO usually e f you select AUTO automatically select the best resolution setting FRAME or FIELD based on the data characteristics of the pictures default e f you select FIELD the picture in the still mode will be stabilized e f you select FRAME the picture in the still mode will be highly defined e An individual picture on TV screen is called a frame which consists of two separate images called a field e Some pictures may be blurred if you select AUTO in the still mode due to their data characteristics 6To exit the menu SETUP Q Hint DRC e This function is available only on the discs which are recorded in the Dolby Digital format DOWN SAMPLING e When playing disc with copyright protection the sound will be down sampled at 48kHz even if you set to OFF
28. OWER OFF ON ENTER ON AUTO POWER OFF Default ON Set to ON to turn this unit off automatically after 30 minutes of no use ANGLE ICON ON AUTO POWER OFF ON ENTER 6 To exit the menu SETUP Q EN Reset to the Default Setting Except for PARENTAL Setting Press SETUP in the 2 Select INITIALIZE 3 Select YES stop mode 4 To exit the menu SETUP 3 Q ENTER Press z twice Hint e When you cancel to initialize at step 3 select NO ENGLISH P ENGLISH 4 3 LETTER BOX 4 3 LETTER BOX OGRESSIVE OFF w PROGRESSIVE OFF DOLBY DIGITAL BITSTREAM DOLBY DIGITAL BITSTREAM Information Troubleshooting Guide If this unit does not perform properly when operated as instructed in this Owner s Manual check this unit consulting the following checklist PROBLEM CORRECTIVE ACTION e Make sure the power is turned on This unit does not e Check if the power plug is connected to an AC outlet respond to the remote e Check the batteries in the remote control control e Aim the remote control directly at the remote sensor If necessary remove all the obstacles between the sensor and the remote control e You have to be within 23 feet 7m of this unit e Check if the right mode is selected If its not in the right mode press DVD or VCR whichever you need on the remote control e Check if a cassette tape is in this unit e Tune your radio to an empty AM station so that
29. Owner s Manual Please read before using this unit SYLVANIA DVD CD Player with Video Cassette Recorder REIT DVC840G If you need additional operating assistance after reading this owner s manual please call TOLL FREE 1 800 968 3429 or visit our web site at http www SylvaniaConsumerElectronics com Table of Contents Precautions W Recording O NN A 12 E E AE AA N EA 2 dd va One Touch Recording essen Les a eii Safeguards A TT 3 Hints for OTR and Timer Recorda 13 ocation and Handling crac nace 4 Convina a Video Tane 14 Avoid the Hazards of Electrical Shock and Fire 4 pying aineenaan URGES URNS Moisture Condensation Wall icc ccsennnivecssagesmennsettiivetnerssnncis 4 DVD Functions About COPs neern 4 A E _ _ _ oq Notice for Progressive Scan QU putS oococcococococcconncncncncnnananas 4 PIDA ina E EE 15 Symbols Used in This Manual cooonccccccconoccnocnnoonnnonnononnnnnnononnono 4 E MP3 WMA Play DAGK sica ta 16 Maintenant ntc di 4 E On Screen Displal aiii citan 16 E About the Video Cassettes and DISCS cococccccccoccnccncconnnnnnonnnnas 5 E Search FUNCION Sii Re 17 Playable Video Cassettes ccccesecresssseerereneesserenersreneseeeens 5 Using Track SEO nstina ads 17 Playable DISCS ratero ici 5 Using Tie Chapter SSAC Nunca 17 Unplayable DISCS uan eN 5 Using Time Searchissa 17 Setu Marker AAA suc oe danbant Meni sieneanaieevouatd
30. PEAT during playbck REPEAT CHAPTER gt 0O0 lt Example DVD gt Each time you press REPEAT repeat function changes as example below repeat off CHAPTER current chapter repeat TITLE current title repeat CD OFF repeat off TRACK current track repeat ALL entire disc repeat Owma OFF repeat off Onr TRACK current track repeat GROUP current group repeat ALL entire disc repeat Hint e Repeat setting will be cleared when moving to another title chapter track or group e Repeat playback are not available with some discs or during repeat A B play back Repeat A B Playback Repeat function is available only during playback 1 Press A B at your desired starting point A LEN amp 2 Press A B at your desired ending point B A B A B Q e Point B should be in the same title or track as point A Hint e To exit the sequence press A B so that OFF appears e To cancel point A press CLEAR C RESET at step 1 e This function does not work in the other repeat modes Random Playback This function shuffles the playing order of tracks instead of playback in the sequence Y Press MODE twice lt Example CD gt 2 Press PLAY gt to start Random Playback Hint e To repeat the current track in the random selections press REPEAT repeat edly until G TRACK appears during playback e To repeat the entire ran
31. PUT on the front panel DOES NOT switch the mode of the remote control You MUST select the correct mode on the remote control 4 Turn On the Unit for the First Time 7 Turn on the TV and set it to channel 3 LANGUAGE SELECT e f channel 3 has been already occupied for broadcasting see RF Output Channel section 2 Select your language in the first time you turn on this unit Then press gt to go to next step POWER gt O O 0 gt ENGLISH ON FRANCAIS ESPANOL 3 Press P gt to start Auto Set Up aan Do you connect the cable from the cable box or the satellite box to the unit s ANT IN jack Yes Press MENU to exit y AUTO SET UP No Please wait for a few minutes After scanning e The tuner stops on the lowest memorized channel e You can select only the channels memorized in this unit by using SKIP CH gt Pi A dv or CHANNEL A v e If AUTO SET UP appears on the TV screen again check the cable connections Then press gt once again 5 Clock Set Up 1 Press MENU and select CLOCK SET Then press gt to go to next step gt O Or O e If the clock is not set the CLOCK SET screen appears when you press MENU In this case go to step 2 MENU TIMER PROGRAMMING AUTO REPEAT OFF CHANNEL SET UP gt CLOCK SET LANGUAGE SELECT CLOCK SET MONTH DAY YEAR 1E l 2 Select the current month Then press gt to go to next step
32. RANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORIZED SERVICE CENTER IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI CORP ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries please contact us at FUNAI CORPORATION Customer Service Tel 1 800 968 3429 http www SylvaniaConsumerElectronics com 19900 Van Ness Avenue Torrance CA 90501 EN Espanol 1 Conexiones Consulte la Basic TV Connection en la p gina delantera antes de utilizar esta unidad Canal de salida RF Si el canal 3 se est utilizando para una transmisi n 1 Programe su televisor al canal 4 2 Inserte una cinta pregrabada en esta unidad 3 Pulse OUTPUT en la unidad para que se encienda la luz VCR OUTPUT e Si aparece ruido en la pantalla de TV presione
33. Recording e Press VCR on the remote control before you set Timer Recording Make sure the remote control is in the VCR mode then press SUBTITLE T SET elf a tape is not in the unit or does not have the record tab G indicator on the front panel blinks and Timer Recording cannot be performed Please insert a recordable tape e When Timer Recordings are set O indicator on the front panel lights up To use the VCR as usual until the time for the recording press SUBTITLE T SET so that O indicator lights off Press VCR TV to choose the VCR position Select either VCR or DVD mode then continue with the other features as described in this manual After an OTR or a Timer Recording has been set this unit operates as follows elf a tape runs out before an OTR or a Timer Recording is finished the unit ejects the tape Press SUBTITLE T SET on the remote control or STOP EJECT W 4 on the unit then press VCR to activate the VCR function again e Once the unit turns to the timer standby mode no VCR functions are available until SUBTITLE T SET is pressed e To cancel the timer standby mode press SUBTITLE T SET on the remote control or STOP EJECT Hf 4 on the unit then press VCR to activate the VCR function again e The mode of the unit and the remote control may differ VCR mode or DVD mode when you set Timer Recording or after you cancelled Timer Recording Press VCR or DVD on the remote control to select your desired mode
34. SET screen appears when you press MENU In this case go to step 2 e Repeat these steps only if either there was a power failure or this unit has been unplugged for more than 30 seconds 2 Select the current month MONTH DAY YEAR js Then press gt to go to next step To Select a Channel You can select a channel by using the Number buttons or is Q gt Q SKIP CH gt gt A lt lt v HOUR MINUTE AM PM Notes for using the Number buttons 3 Select the current day CLOCK SET e When selecting cable channels which are higher than 99 Then press gt to go to next step Mo gee E enter channel numbers as a three digit number for exam ple 117 press 1 1 7 a D gt O HOUR MINUTE AM PM e You must precede single digit channel numbers with a zero for example 02 03 04 and so on 4 Select the current year CLOCK SET MONTH DAY YEAR To Add or Delete Channels Then press gt to go to next step 10 02 20 06 a HOUR MINUTE AMPM A WFQ ee TO Select the current hour Press MENU and select CHANNEL SET UP ENE 5 ae TIMER PROGRAMMING Then press gt to go to next step Oe aera Then press gt to go to next step AUTO REPEAT OFF MENU LANGUAGE SELECT a D gt O KONR MINUTE AMPM gt Q QQ e If the clock is not set the CLOCK SET screen appears when you G Select the current minute CLOCK SET ress MENU In this case press MENU again pest l pe
35. ado m s bajo e Puede seleccionar s lo los canales memorizados en esta unidad con SKIP CH gt PI a kt4 v o CHANNEL A v e Si aparece nuevamente AJUSTE AUTO en la pantalla de TV verifique las conexiones de cable Presione nuevamente gt MENU PROGRAMAR AUTOREPETIR OFF A MENU gt QQ e Si no se ha ajustado el reloj aparece la pantalla AJUSTE DE RELOJ cuando pulse MENU En este caso vaya al paso 2 2 Seleccione el mes actual MES DIA 1 0 A gt HORA MINUTO AM PM 3 Seleccione el dia actual AJUSTE DE RELOJ MES DIA 10 02 o WFO HORA MINUTO AM PM 4 Seleccione el a o actual O OFrO 5 Seleccione la hora actual MES DIA A O 10 02 2006 HORA MINUTO AM PM AJUSTE DE RELOJ MES DIA ANO 10 02 LUN 2006 9 E HORA MINUTO AM PM 03 6 Seleccione los minutos actuales O OrO AJUSTE DE RELOJ MES DIA A O 10 02 LUN 2006 HORA MINUTO AM PM 05 40 AJUSTE DE RELOJ MES DIA A O 10 02 LUN2006 o ee de ol PMA 8 Para salir de la pantalla AJUSTE DE RELOJ 7 Seleccione AM o PM ES Espanol 6 Reproducci n de la n ani ie A Disco cinta FR grabadora de v deo Boian soena EEs Antes Encienda el televisor p seleccionar e Para seleccionar directamente la SEI boton et ae erties y cambie al canal 3 an el cap tulo o cancion en el modo de grabadora de e Si el canal 3 se est utiliza
36. ap between Index Marks should be greater then 1 minute for SP mode 2 minutes for LP mode and 3 minutes for SLP mode Time Search You can search backward and forward a specific length of time on a tape Wer Svs KD e Insert a tape into this unit 7 Press SEARCH MODE twice SEARCH MODE TIME SEARCH 2 Select the desired length of time for fast forwarding or rewinding TIME SEARCH 0 01 9 59 1 minute 9 hours and 59 minutes 3 To rewind To fast forward q i 4 After searching it automatically starts playback PLAY Hint for Index Search amp Time Search e These functions are not available during recording e Press STOP W to stop the search e f a tape ends during a search your search will be cancelled and the tape will rewind to the beginning VCR Functions suonouny HOA Auto Repeat This function will playback a tape repeatedly from the beginning when the tape reaches the end Press MENU and select MENU 2 Press gt to set MENU AUTO REPEAT during playback oc ine AUTO REPEAT ON or OFF p JIMER PROGRAMMING CHANNEL SET UP CHANNEL SET UP MENU CLOCK SET CLOCK SET Q LANGUAGE SELECT LANGUAGE SELECT j or Q Hint e To cancel Auto Repeat follow step 1 above Then press D gt so that OFF appears beside AUTO REPEAT Press CLEAR C RESET to exit e If menu remains on the TV screen after step 2 press CLEAR C RESET to exit e
37. before you operate When an OTR or a Timer Recording is completed elf Auto Power Off for DVD has been activated and there are Timer Recordings on standby the unit turns off automatically and GS indicator on the front panel lights to indicate the unit is in the timer standby mode e indicator on the front panel flashes if there are no more Timer Recordings on standby elf Auto Power Off for DVD has NOT been activated the unit switches to the DVD mode and all the VCR functions will be unavailable All the DVD functions are available during OTR timer standby mode and Timer Recording e Press STOP EJECT Mf 4 on the front panel or SUBTITLE T SET on the remote control to use the VCR when the unit is off e Press OUTPUT on the front panel or VCR on the remote control to use the VCR when the unit is on In case Timer Recording is in standby mode press STOP EJECT lf 4 on the front panel or SUBTITLE T SET on the remote control and then press OUTPUT on the front panel or VCR on the remote control If you want to use the DVD player during a Timer Recording or while indicator on the front panel is on or blinking e Press POWER to turn on the unit Press DVD on the remote control to choose DVD mode then continue with the other DVD features as described in this manual NOTE for Timer Recording elf there is a power failure or the unit is unplugged for more than 30 seconds clock and all timer settings will be lost
38. ccording to your TV See pages 20 21 Audio or subtitle language e The selected language is not available for audio or subtitles on the DVD does not match the setup This is not a malfunction The camera angle cannot The DVD does not contain sequences recorded from different camera angles be changed This is not a malfunction Audio or subtitle language e The DVD does not contain audio source or subtitles in the selected language cannot be changed This is not a malfunction Prohibited icon appears e That operation is prohibited by this unit or the disc on the screen prohibiting This is not a malfunction an operation e Some functions are not available in specific modes but this is not a malfunction Read the description in this Owners Manual for details on correct operations e Playback from a desired track and random playback are not available during program playback e Some functions are prohibited on some discs 220 gt EN Information Specifications UOI EWOJU Video Heads Operating temperature e Designs and specifications are subject Four Heads 41 F 5 C to 104 F 40 C to change without notice Output signal format Dimensions e If there is a discrepancy between lan NTSC color W 17 3 16 435mm guages the default language will be Power source H 3 3 4 94mm English 7 120 V AC 10 60 Hz 0 5 D 93 16 233mm Power consumption Weight 21 W standby 3 8W
39. ck automatically e Tracking will be automatically adjusted upon play back To adjust the tracking manually press SKIP CH A A Hd vw or gt g Oo 2 is 00000 CHANNEL A v Counter Reset Press CLEAR C RESET To play back in slow motion Slow mode Press SLOW during playback or the still mode elf the noise bars appear on the TV screen you can reduce it by using SKIP CH PP I a Htd v or CHANNEL A v Auto Rewind When a tape reaches its end during playback fast forward or recording except Timer Recording and One Touch Recording the tape will automatically rewind to the beginning After rewinding finishes the unit will eject the tape e Still Slow mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head e To return to playback from the Picture Search Still Slow mode press PLAY gt Index Search You can skip the program backward and forward by the Index Mark Ver ESNS Eo e Insert a tape into this unit Y Press SEARCH MODE once SEARCH MODE INDEX SEARCH 2 To select Index Mark INDEX SEARCH 03 7 Q Q 01 20 CURRENT PROGRAM Beginning End of of the tape the tape 3 02 01 01 02 0 INDEX MARK 3 To rewind ose To fast forward i 4 Alter searching it automatically starts playback PLAY Hint e The Index Mark will be made automatically at the beginning of each recording e The time g
40. ctions in the REFER SERVICING TO QUALIFIED SERVICE PERSONNEL literature accompanying the appliance Laser Safety This unit employs a laser Only a qualified service person should remove the cover or attempt to service this device due to possible eye injury CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED DO NOT STARE INTO BEAM LOCATION INSIDE NEAR THE DECK MECHANISM FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this equipment if an unauthorized change or modifica tion is made RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipme
41. discharge unit connection to grounding electrodes and requirements for the grounding electrode Fig A FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA y ANTENNA DISCHARGE UNIT NEC SECTION 810 20 rr SERVICE EQUIPMENT gt lt GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMP Lg POWER Seve OMS ELECTRODE SYSTE NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE S2898A Lightning For added protection for this video product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the video product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of
42. dom selections press REPEAT repeatedly until 5 ALL appears during playback e During random playback you cannot go back to the previous track B a am You may determine the order in which tracks will play J Press MODE once MODE 7Q 2 Using a v to select desired track Press ENTER D Q gt e Up to 99 tracks can be ordered e If eight or more tracks were in a program use SKIP CH P A t4 v to see all the tracks e While an MP3 WMA folder is open Press gt when you want to go to the next hierarchy Press lt 4 when you want to go back to the previous hierarchy except for the top hierarchy 3 Press PLAY gt to start Programmed Playback Hint e Press CLEAR C RESET at step 2 to erase the most recently entered track e To erase all programmed tracks at once select ALL CLEAR and press ENTER at step 2 e While a program is being played back STOP W works as follows Press STOP W and PLAY next so that the programmed playback restarts CD playback restarts from the current point MP3 WMA playback restarts from the beginning of the current track Press STOP W twice and PLAY gt next so that playback restarts from the first track in the original order However your programmed playback can be restarted when you follow the above steps Your programs are still stored until
43. e Jag Then press gt to go to next step MO OE WON 2008 2 Select MANUAL SET UP CHANNEL SET UP AUTO SET UP or QJ Then press gt to go to next step o C gt Q D gt O MONTH DAY YEAR HA A AAA AAA 10 02 MON2006 Select the channel to be added or deleted MANUAL SET UP QJ Q 3 cio et Doe Q REI SE ADD o or a or 8 To exit the CLOCK SET screen 4 Select ADD or DELETE MANUAL SET UP CHANNEL 30 CATV Hint e To go back one step press lt 4 during steps 2 to 7 HOUR MINUTE AM PM 05 40 7 Select AM or PM CLOCK SET e Your clock setting will be lost if either there is a power failure or this unit has 5 Toexitthe menu ci am been unplugged for more than 30 seconds Function Overview Front Panel Indicator Lights up when power is on Lights up during a recording Blinks when a recording is paused Lights up when the Timer Recording or an OTR recording has been set VCR DVD Switching Lights up when this unit is in the DVD mode Lights up when the progressive scan system is activated Lights up when the inserted disc is being played back Blinks when an unacceptable disc is inserted Lights up when this unit is in the VCR mode You must select which component you wish to operate with OUTPUT at first as this product is a combination of a VCR and a DVD player VCR MODE Press VCR on the remote contro
44. e box want to view or record e While you are recording only the recorded channel can be viewed Connection to an Audio System Stereo system Dolby Digital decoder MD deck or DAT deck Analog audio coma o inoue audio OO input jacks 2 E 0 input jack Audio Coaxial Digital cable Audio cable Supplied commercially available DVD AUDIO ON AUDIO SYIDEO Hipe0 our COAXIAL AUDIO OUT Analog DVD VCR DIGITAL AUDIO OUT Setting SETUP gt QUICK gt Connection DOLBY DIGITAL Connecting to a Dolby Digital decod er for Dolby Digital audio output BITSTREAM DVD mode only Connecting to the other equipment an MD deck or DAT deck etc with out Dolby Digital decoder DIGITAL AUDIO OUT Hint e Playing a DVD using incorrect settings may generate noise distortion and may a also damage the speaker To complete these settings refer to pages 20 21 Hint e The audio source on a disc in a Dolby Digital Multi channel surround format cannot be recorded as digital sound by an MD or DAT deck e By hooking this unit up to a Multi channel Dolby Digital decoder you can enjoy high quality Dolby Digital Multi channel surround sound as heard in the movie theaters e Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers Connection to a TV AUDIO IN a Good picture Better picture Best picture VIDEO IN S VIDEO IN
45. e la grabadora de v deo a e Para seleccionar la posici n de e Para seleccionar la posici n dE a rd de CD MP3 WMA o la posici n del de la grabadora de v deo o televisor posici n del televisor TS e Para ampliar parte de la imagen x2 x4 Quick Use Guide 1 Connections Please refer to Basic TV Connection on the front page before you use this unit RF Output Channel ___ If channel 3 has been already occupied for broadcasting 1 Set your TV to channel 4 2 Insert a pre recorded tape into this unit 3 Press OUTPUT on the unit so that the VCR OUTPUT light is lit e f noise appears on the TV screen press VCR TV on the remote control 4 Press PLAY once 5 After a few seconds press and hold PLAY B on the unit for 3 seconds e The RF output channel will change to channel 4 from channel 3 and you will see a playback picture e When a picture does not appear on the TV screen repeat step 4 6 Press STOP W to stop playback P Installing the Batteries for the Remote Control VCR button DVD button O O RECIOTR ENTER o e eQ90 Q9 2 DVDOUTPUT EEQ Q light 228e e S OUTPUT button 6 VCR OUTPUT light VCR MODE Press VCR on the remote control Verify that the VCR OUTPUT light is lit DVD MODE Press DVD on the remote control Verify that the DVD OUTPUT light is lit Hint e Pressing only OUT
46. e service technician to per form safety checks to determine that the video product is in proper operating condition Heat This video product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat o EN Precautions SUOI NeIIId Location and Handling e Do not stand this unit up vertically Install this unit in a hori zontal and stable position Do not place anything directly on top of this unit Do not place this unit directly on top of the TV e Depending on the TV noise or disturbance of the picture and or sound may be generated if this unit is placed too close to your TV In this case please ensure enough space between your TV and this unit e Do not cover or place this unit in enclosed spaces to prevent excessive temperature build up e Do not place this unit in direct sunlight or near heat sources e Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Keep this unit away from strong magnetic objects e Do not place any object containing water or other liquids on this unit In the event that liquid should enter the cabinet unplug this unit immediately and contact the retailer or an Authorized Service Center immediately e Do not remove this unit cabinet Touching parts inside the cabinet could result in electric shock and or damage to this unit For service and adjustment
47. eceipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unau thorized service center This limited warranty does not apply to any product not purchased and used in the United States This product is produced for home use and this warranty only covers failures due to defects in material or workmanship which occurs during normal use lt does not cover damage which occurs in shipment or failures which are caused by repairs alterations or product not supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication altera tion faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WAR
48. ecomes inoperative do not try to correct the problem by yourself There are no user serviceable parts inside Turn off unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center CLEANING THE CABINET e Use a soft cloth slightly moistened with a mild detergent solution Do not use a solution containing alcohol spirits ammonia or abrasive CLEANING DISCS e When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the center to out Do not wipe in a circu lar motion e Do not use solvents such as benzine thinner commercially avail able cleaners detergent abrasive cleaning agents or antistatic spray intended for analog records CLEANING THE DISC LENS e f this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting Guide in this Owner s Manual the laser optical pickup unit may be dirty Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit DISC HANDLING e When you handle a disc hold it by its edge and try not to touch the surface of the disc e Always store the disc in its protective case when it is not used AUTO HEAD CLEANING e Automatically cleans video heads as you insert or remove a cassette so you can see a clear picture e Playback picture may become blurred or interrupted while the TV program reception is clear Di
49. elect the desired item D gt 8 lt SETUP MENU gt Confirm that QUICK is selected LEA p20 A Step 5 ee aa E s E e w H gt P21 B Step 5 P21 C Step 5 e Refer to the sections PLAYER MENU TV ASPECT PROGRESSIVE or DOLBY DIGITAL on page 20 or 21 CUSTOM Menu You can change the settings of the unit on pages 20 21 indicates DVD Setup menus also accessible from the QUICK SETUP menu 1 Press SETUP in the stop 2 Select CUSTOM 3 Select the desired item mode GO OD gt O lt SETUP MENU gt PLAYER MENU ENGLISH a PLAYER MENU ENGLISH e AUDIO ORIGINAL TV ASPECT 4 3 LETTER BOX TV ASPECT 4 3 LETTER BOX SUBTITLE FF PROGRESS BS Z R ESSIVE Wy PROGRESSIVE DISC MENU ENGLISH DOLBY DIGITAL BITSTREAM DOLBY DIGITAL BITSTREAM PLAYER MENU ENGLISH LANGUAGE menu DISPLAY menu OTHERS menu ORIGINAL TVASPECT 4 3 LETTER BOX DRC ON FF s gt SUBTITLE O STILL MODE AUTO 5 DOWN SAMPLING ON Enter current password EE OFF A DISC MENU ENGLISH PROGRESSIVE OFF DOLBY DIGITAL BITSTREAM EEE PLAYER MENU ENGLISH v y M page 20 A page 21 page 21 A LANGUAGE Setting j Follow steps 1 to 3 in the CUSTOM Menu section above 4 Select the desired item 5 Select the desired language or AUDIO 1 2 oo Default ORIGINAL Sets the audio language a e Language options are not available with LANGUAG
50. er el cursor y e Para mover el cursor y determinar su Pa 7 i wid determinar su posici n posici n ash del cos Antes Encienda el televisor amplificador y Secs volver un paso otros equipos que puedan estar conectados a durante el ajuste del esta unidad Aseg rese que el televisor y el a ee A y comercios est n en el canal correcto e Para activar desactivar el a el orden de reproducci n o nivel del negro la reproducci n aleatoria e Para activar desactivar el e Para activar desactivar el envolvente envolvente virtual virtual OPENQLOSE e Para abrir o cerrar la e Para abrir o cerrar la bandeja del e Para expulsar el videocasete bandeja del disco disco de la grabadora de v deo e Para hacer una pausa de e Para hacer una pausa de la reproducci n del disco e Para hacer una pausa en la r reproducci n o grabaci n de la cinta e Para avanzar la reproducci n eproducci n del disco e Para avanzar la reproducci n un cuadro a la vez un cuadro a la vez e Para empezar la reproducci n Para empezar la reproducci n del e Para empezar la reproducci n del disco disco de la cinta Ponga un disco con la pS o apagar la e Para encender o apagar la unidad etiqueta hacia arriba 3 Paraempezar 4 Para parar la o una grabaci n de un toque la reproduccion reproduccion S e Para reproducir a elo ao anemi una R un cap tulo Para reproducir E una canci n grupo o disco MP3 WMA O Para volver
51. ge the subtitle from the disc menu Refer to the manual accompanying the discs for details Audio Language This unit allows you to select an audio language if multiple languages are available during DVD playback Y Press AUDIO to change audio language AUDIO TOM 1 ENG Dolby D 3 2 1ch 48K 3 CAN gt Each time you press AUDIO audio language changes as example below y ENG English audio y SPA Spanish audio om FRE French audio Y Hint e Some discs will only allow you to change the audio setting from the disc menu Refer to the manual accompanying the discs for details e When OFF appears on the TV screen it means audio language is not available e If your language is not shown after pressing AUDIO several times the disc may not have that language However some discs allow audio language set ting on the disc menu Operation varies depending on the disc so refer to the manual along with the disc Camera Angle Some DVD discs may contain scenes which have been shot simultaneously from various angles You can change the camera angle if the angle icon appears on the screen If the ANGLE ICON setting is OFF in the OTHERS menu the angle icon will not appear Refer to pages 20 22 Adjust the Black Level Setting to make the dark areas of the TV picture brighter aj ON OFF A J Press ANGLE during playback ANGLE LON gt O
52. hat the PROGRESSIVE SCAN indicator on the front panel lights off e When PROGRESSIVE is ON video signals from the unit s VIDEO OUT and S VIDEO OUT jacks will be distorted or not be output at all AUDIO Setting Choose the appropriate audio settings for your equipment It only affects during the playback of DVD discs Follow steps 1 to 3 TV ASPECT Default 4 3 LETTER BOX See Hint on the left Select the TV ASPECT TV ASPECT 4 3 LETTER BOX AUTO 4 3 LETTER BOX STILL MODE 4 3 PAN amp SCAN PROGRESSIVE OFF ENTER 16 9 WIDE STILL MODE Default AUTO See Hint on the right Select the MoE desired TVASPECT 4 3 LETTER BOX setting STILL MODE AUTO Tam PROGRESSIVE OFF ENTER LERAME PROGRESSIVE Default OFF See Hint on the left TV ASPECT 4 3 LETTER BOX STILL MODE AUTO PROGRESSIVE OFF If there is no picture or you do not press any Mato ap Tte ogre buttons for 15 seconds re poet eisa Progressive scan will ede switch to OFF and it SELECT aly SETENTER will exit the setup menu NO YES SELECT a v SET ENTER in the CUSTOM Menu section on page 20 4 Select the desired item QQ AUDIO menu ogoggag 2 Amos DOWN SAMPLING A DOLBY DIGITAL BITSTREAM A q 5 DRC Dynamic Range Control Default ON Set to ON to compress the range between soft and loud sounds DRC JON DOWN SAMPLING ON DOLBY DIGITAL BITSTREAM DOW
53. ing order or eTo set virtual surround play randomly on off eTo set virtual surround on off Mon G eTo open or close the disc e To eject the video To open or close the disc tray cassette irom the VCR e To pause tape playback or recording e To advance playback one frame at a time e To begin disc playback e To begin disc playback e To begin tape playback POWER eTo turn the unit on off eTo turn the unit on off jj e To start a recording or One Touch Recording REPEAT z eTo play a track or disc repeatedly CD ae CHAPEL ortie larg play a track group or disc p y repeatedly MP3 WMA RE TUNN eTo return to the previous To return to the previous operation operation in menu in menu SEARCH pe oa chapter title or T e des en To call up the index or e To set or search the markers To set or search tee ne 0 ime search menu Oo eTo call up the DVD To call up the DVD setup Lo call up the DVD setup menu i aaa l D S eTo ME channels eTo skip chapters or titles To skip tracks e To adjust the tracking manually during playback Insert a disc with label facing up eTo pause disc playback eTo advance playback one To pause disc playback frame at a time 3 Tostart playback playback e To turn the unit
54. io goto nextste LANGUAGE SELECT 1 Press MENU until the main menu appears p 9 P eevee don 2 Select LANGUAGE SELECT by using a v then POWER FRANCAIS press gt Oro O gt O ee 3 Select ENGLISH FRANCAIS or ESPA OL by using a v then press CLEAR C RESET 3 Press gt to start Auto Set Up AUTO SET UP Hint e If you accidentally select Spanish or French and need English Press MENU and choose SELEC IDIOMA or SELECTION LANGUE Press gt and select ENGLISH Finally press CLEAR C RESET e To add or delete channels in this unit SKIP CH gt A Ht 4 y button works on the channel number memorized in this unit A w works on all Do you connect the cable from the cable box or the satellite box to the unit s ANT IN jack Clock Setup Yes Press MENU to exit e Refer to Hint for Cable Box or Satellite Box section on page 6 No Please wait for a few minutes After scanning Press MENU and select CLOCK SET WENT e The tuner stops on the lowest memorized channel Then press gt to go to next step TIMER PROGRAMMING e You can select only the channels memorized in this unit by using SE aT a ET MENU SKIP CH gt Pi a tv or CHANNEL A v gt TANGUAGE SELECT e If AUTO SET UP appears on the TV screen again check the cable gt id gt connections Then press gt once again Hint e If the clock is not set the CLOCK
55. it playback chosen point A and B point A and B z eTo select camera angles on a disc z eTo select audio eTo select STEREO L ch or R ch languages on a disc CD eTo clear the markers e To remove status an in program input eTo clear the numbers entered OPENCLOSE entered incorrectly incorrectly eTo cancel the point for A B eTo cancel the point for 4 A B repeat repeat CD e To display the current le display the current e To display the current disc mode time tape counter and isc mode a e To select the DVD output mode eTo activate the remote control in DVD mode To stop To eject the playback cassette eTo clear the markers CLEARY e To clear the numbers C RESET e To exit the VCR Menu e To reset the tape counter DVD CD Playback Before Turn on the TV amplifier and any other components which are connected to this unit Make sure the TV and audio receiver commer cially available are set to the correct channel e To select the DVD output mode e To activate the remote control in DVD mode e To select an item LD onthe VCR Menu e To move the cursor and e To move the cursor and determine O A determine its position its position eTo go back one step during clock and timer me MENU 7 3 Lo call up the Menu on eTo call up the file list MP3 WMA To call up the To call up the VOR Menu Menu OPEN CLOSE S eTo set black level on off To arrange the play
56. l Verify that the VCR OUTPUT light is lit DVD MODE Press DVD on the remote control Verify that the DVD OUTPUT light is lit Hint e Pressing only OUTPUT on the front panel DOES NOT switch the mode of the remote control You MUST select the correct mode on the remote control Front amp Rear Terminals OPENICLOSE 3 m D CHANNEL 0800 VCR button DVD button OUTPUT light OUTPUT button VCR OUTPUT light pvp ver T0000 0 0 UDIO S VIDEO Fieguar AUD our Or Or 7 AUDIO IN D el Cr aj Og C 2 VIDEO OUT VIDEO IN Cr ode 9 Rear Panel 8 6 1 DVD AUDIO OUT analog jacks Connect the supplied audio cable here through the audio in jacks of a television or other audio equipment DVD only 2 DVD VCR AUDIO OUT jacks Connect the supplied audio cable here through the audio in jacks of a television or other audio equipment 3 AUDIO IN jack Connect audio cable coming from the audio out jack of a camcorder another VCR or an audio source here 4 ANT IN jack Connect your antenna or cable box here 5 ANT OUT jack Connect the supplied RF cable to the antenna input jack of a television 9 6 VIDEO IN jack Connect a cable coming from the video out jack of a camcorder another VCR or an audio visual source laser disc player video disc player etc here 7 DVD VCR VIDEO OUT jack Con
57. mber Using SKIP CH gt PI a 44 7 1 Press SKIP CH PPi a t4 w during playback Current Track E RARA 29 29 TR1 TR2 TRS TR 4 SKIP Ia SKIP PPI Hint e 10 can also bring the Track search display except for the disc with less than 10 tracks For such a disc track search can be done by just pressing the track number Using Title Chapter Search Y Press SEARCH MODE once for the Chapter Search Press SEARCH MODE twice for the Title Search SEARCH 12 AN Select title chapter number by using the Number buttons within 30 seconds O Ed _ ne DO YU Using SKIP CH a lt v 1 Press SKIP CH P a Ht4 v during playback 2 am ay SKIP 144 SKIP gt gt or Current Title TT SKIP 144 SKIP gt gt Hint e Depending on the disc being played this function can also be performed by directly entering the desired chapter number with the Number buttons Refer to the manual accompanying the disc If the disc has no chapters Using Time Search 1 Press SEARCH MODE repeatedly until the Time Search display appears Zotar N 2 Select a desired disc time by using the Number buttons within 30 seconds DOO EJ 1 29 00 Sy _ GEL 1 29 00 Hint e When there is no need to enter a number 0 appears automatically For example 0 0_ _ _ appears in the Time Search display if the total time
58. me e To go back one step press lt during steps 3 to 9 Y To Check Correct or Cancel a Timer Program 8 Select the desired channel 1 Press SUBTITLE T SET then VCR on the remote Then press gt to go to next step ONE TIME PROGRAM control DATE 10 23 NON 2 Select main menu by pressing MENU END TIME 08 30 PM 3 Select TIMER PROGRAMMING by using a v then D 0 gt O sett press De ue 4 Select the program number which you want to check by e If you have connected the unit to a cable box or satel using a v The details of the program you selected will lite box as the connection on page 6 select the VCR to appear on the TV screen channel 3 or 4 the RF output channel of the VCR Then a select the desired channel at the cable box or satellite box e Go to the digit you want to change by USING lt gt Leave the cable box or satellite box on for Timer Recording Then enter correct numbers by using a v e You may cancel the entire program by pressing lt 4 Q Select the desired recording speed then press while the program number blinks CLEAR C RESET ETE PROSA 5 Press CLEAR C RESET to exit PROGRAM NUMBER 1 6 Press SUBTITLE T SET to return to timer standby CLEAR 10 23 MON D D gt W8 do dd o EEE ee To cancel a Timer Recording in progress Press STOP EJECT E on the unit SLP e To set another program after step 9 press P gt Then continue with step 2 Hints for OTR and Timer
59. me of the entire disc Elapsed time of the entire disc DISPLAY aar you are playing a disc in PROGRAM or RANDOM mode i PROGRAM or RANDOM will be displayed instead of 2 DISPLAY i TRACK 01 y DISPLAY g 1 36 0 01 15 GT gt Current playback status The name of the file currently in play will be displayed TR Track Current track number Total tracks Current repeat setting if active G T Track repeat G G Group folder repeat G A Disc repeat Elapsed playing time of the current O track RANDOM 3 mes 7 He PROGRAM ee when you are playing a disc in PROGRAM or RANDOM mode DISPLAY EN Search Functions SEARCH MODE does not work during Programmed or Random Playback Using Track Search Y Press SEARCH MODE SEARCH MODE 2 Select track number by using the Number buttons within 30 seconds QO Y O QO DOD e For the disc with less than 10 tracks press the track number directly e For discs with more than 10 but less than 99 tracks to play single digit track press 0 first then the track number e g for track 3 press 0 3 To play a double digit track press the track number e For discs with more than 100 tracks to play a single or a double digit track press 0 first then the track number e g for track 3 press 0 0 3 and for track 26 press 0 2 6 To play a triple digit track press the track nu
60. mpanying the disc for details Resume Press STOP W during playback Resume message will appear on the TV screen Press PLAY gt playback will resume from the point at which playback was stopped Hint e To cancel resume press STOP M one more time in the stop mode e For MP3 WMA playback will resume from the beginning of the track at which playback was stopped e The resume information stays on even when the power is turned off Paused and Step by Step Playback Press PAUSE HI during playback To continue playback press PLAY Lu Press PLAY to play from here To play the beginning press STOP first and then PLAY lt Example DVD gt The disc goes forward by one frame each time PAUSE II is pressed in the pause mode To continue playback press PLAY e On DVDs set STILL MODE to FIELD in the DISPLAY menu if pictures in the pause mode are blurred Refer to pages 20 21 To use SKIP 4 REV gt gt SKIP FWD on this unit Press once to skip a chapter or track to a desired point layer is being switched to the 2nd layer This is not a malfunction You can change the on screen language for DVD function in PLAYER MENU setting Refer to page 20 Fast Forward Reverse Search CID aa GE mn 1 Press lt lt lt or gt repeatedly during playback to select the required forward or reverse speed To continue playback press PL
61. n off o turn the unit on off e Make sure that there is no obstacle To start a recording or between the remote control and the One Touch Recording remote sensor on the unit a ee A a e D or disc repeat e To play a chapter or title edly e The maximum operable ranges from repeatedly e To play a track group or disc the unit are as follows repeatedly MP3 WMA Line of sight approx 23 feet 7m pa eTo return to the previous To return to the previous opera Either side of center operation in menu tion in menu approx 16 feet 5m within 30 SEARCH oo chapter title or a e a 60 eTo call up the index or Above approx 16 feet 5m within 15 eTo set or search the markers To set or search the markers CD time Search menu 1 1 Oo Below approx 10 feet 3m within 30 sTo caius he DNO seiis meni Ooo e To change channels e To skip tracks e To adjust the tracking manually during playback e To view the tape in slow motion e To select the recording speed A e To stop playback or e To put the VCR into standby mode for a Timer Recording e To return to the top file of the highest hierarchy in the program and file list MP3 WMA e To select the VCR output mode e To activate the remote control in VCR mode e To select CD MP3 WMA position To select VCR position or or TV position TV position eTo magnify part of a picture x2 x4 EN 0000 00000 00000 p oO Pel 2 i xoxo
62. ndo para MICA una transmisi n vea la secci n e Para buscar en avance RF Output Channel retroceso en un disco e Para buscar en avance retroceso en e Para el avance retroceso de e Para empezar la reproducci n m en avance retroceso lento E S ED durante el modo de pausa A A Y pe e Para repetir entre los puntos Para repetir entre los puntos A y B A y B elegidos elegidos CD 2 Para empezar la 5 a a Y e Para seleccionar los ange os z e Para seleccionar el idioma e Para o EST REO L ch o de audio en un disco R ch e Para los marcadores CD e Para borrar los marcadores o r o o ETA Para borrar los n meros Para retirar el N de estado en la Para salir del men de la A entrada de programa grabadora de v deo 3 Para parar la 4 Para expulsar ee e Para borrar los n meros entrados e Para reponer el contador de reproducci n PHEN incorrectamente cinta OPENOLOSE repetici n A B e Para borrar el punto para la repetici n A B CD DISPLAY eP ara indicar el modo de e Para indicar la hora actual S disco actual e Para indicar el modo de disco actual contador de cinta y canal e Para seleccionar el modo de Para seleccionar el modo de salida salida de DVD de DVD e Para activar el mando a e Para activar el mando a distancia en distancia en el modo DVD el modo DVD Reproducci n de DVD e Para seleccionar un AE ua ody e Para avanzar al un disco una cinta e Para mov
63. nect the supplied video cable here through the video in jack of a television 8 COMPONENT VIDEO OUT jacks Connect optional COMPONENT VIDEO cable here through the COMPONENT VIDEO in jacks of a television DVD only 9 S VIDEO OUT jack Connect an optional S VIDEO cable here through the S VIDEO in jack of a tel evision DVD only 10 DIGITAL AUDIO OUT COAXIAL jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver DVD only EN Remote Control AS DVD mode VCR mode dl CHE CEJ oN Coin Button dl 9 DVD O KODE O Wile O MAT v Alphabetical order SVS e To select channel e To select track directly e The 10 button has no effect in VCR mode OPEN CLOSE pe n la m m is E 2 o e To select chapter or title directly 0 e To search forward back ward through a disc e To search forward backward e To forward backward a e To begin slow forward reverse through a disc tape playback in the pause mode a e To repeat between your e To repeat between your chosen Q chosen point A and B point A and B CD A eTo select camera angles Q on a disc MUDD eTo select audio languages To select STEREO L ch or R ch amp on a disc CD e To clear the markers CD e To clear the markers e To remove status number in CLEAR e To clear the numbers program input n l lt entered incorrectly e To clear the numbers ente
64. nt does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR VITER LES CHOC LECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND A NOTE ABOUT RECYCLING This product s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes Make your contribution to the environment LAY e Used up batteries do not belong in the dust bin e You can dispose of them at a collection point for used up batteries or special wastes e Contact your council for details
65. on off OPEN a gt g o S fe o D m 0 lt eTo call up the DVD o call up the DVD setup menu menu 00000 00000 e lt o la gt o 000Q cp D AN To view the A in slow A 2 po select the recording speed e To stop playback or To stop playback To stop playback eTo select subtitles on a disc ro MENU P e To return to the top file of the Spr ine rep Meny highest hierarchy in the program and file list MP3 WMA D e To select the VCR output mode eTo activate the remote control in VCR mode m Zz m Dd O o ao m zZ D Hi D z N Q o de O 00 O Po gt De y Re Q 00 e To put the VCR into standby mode for a Timer Recording O O O eTo select DVD position or To select CD MP3 WMA position To select VCR position or TV position or TV position TV position 2 eTo magnify part of a picture x2 x4 1VMN22455 ESA02UD xxx xk Printed in China
66. orded portion of the disc is too small less than 2 3 16 inches 55 mm across it may not play back properly 9 Do not glue paper or put stickers on to the disc These may damage the disc and the unit may not read it correctly 10 Discs Recorded in the VR Video Recording format cannot be played back 11 This DVD CD player cannot playback the disc contents protected by Windows Media Digital Rights Management DRM Ay q gt gt Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in Mag vos the United States and or other countries Unplayable Discs NEVER play back the following discs Otherwise malfunction may result DVD RAM DVD Audio CD i Photo CD Video CD DVD with region codes other than 1 or ALL DTS CD DVD ROM for personal computers CD ROM for personal computers On the following disc the sound MAY NOT be heard Super Audio CD NOTE Only the sound recorded on the normal CD layer can be delivered The sound recorded on the high density Super Audio CD layer cannot be delivered Any other discs without compatibility indications aa EN Precautions Setup Connections Please refer to Basic TV Connection on the front page before you use this unit RF Output Channel If channel 3 has been already occupied 5 After a few seconds press and hold Hint for broadcasting PLAY gt on the unit for 3 seconds The Rr onii dianam ciae 1 Set you
67. r TV to channel 4 e The RF output channel will change to when you adusi tracking dung kad 2 Insert a pre recorded tape into this unit channel 4 from channel 3 and you will back In this case stop the playback 3 Press OUTPUT on the unit so that the see a playback picture and start the playback again After VCR OUTPUT light is lit e When a picture does not appear on the eo Ad P anne e If noise appears on the TV screen press TV screen repeat step 4 silla VCR TV on the remote control 6 Press STOP W to stop playback 4 Press PLAY gt once Hint for Cable Box or Satellite Box To select channels of the cable box or satellite box Cable box or 1 Turn on the unit by pressing POWER then press A AI 3 VCR TV The POWER indicator on the front panel will ae T Ak As A light then press SKIP CH P A M V to select chan G supplied D nel 3 or 4 the same channel as the output channel of the ae Back of TV cable box or satellite box e If you use the channel 4 you need to change the unit s Select this connection when you want to view or record a RF output to channel 4 Refer to RF Output Channel scrambled channel With this connection channels cannot be 2 At the TV select channel 3 or 4 the same channel as you changed on the unit You can view or record ONLY have selected at step 1 the channels you have selected on the cable box or the 3 On the cable box or satellite box select the channel you satellit
68. ranty o 24 E Other Operations miii 11 E Eppan ol oiis its 25 Midex Searc ienesa renee eenre Pre erree tr ireet nnn er erriee ter cer corr 11 E Quick Use Guide 27 Mme Sa espada acia a erect mean nee ET areeaene Ces eens A A A 12 Basic TV Connection Supplied Accessories Remote control NB177UD with two AA batteries RF cable WPZ0901TM002 Audio Video cables WPZ0102TMO015 WPZ0102LTE01 Owner s Manual 1VMN22455 Owner s Manual Cable TV Antenna Back of DVD VCR signal Pret Tit CELLAN Back of TV lt 7 Li I From DVD VCR a Z From TV Please refer to Connections on page 6 Espa ol Information DVD Functions VCR Functions Setip Precautions SUOI NeIIId Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude DO NOJ OPEN to constitute a risk of electric shock to persons CAUTION The exclamation point within an equilateral triangle is TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE intended to alert the user to the presence of important COVER OR BACK NO USER SERVICEABLE PARTS INSIDE operating and maintenance servicing instru
69. rate from battery power or other sources refer to the operating instructions Grounding or Polarization This video product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience recep tacles and the point where they exit from the appliance Outdoor Antenna Grounding If an outside antenna or cable system is connected to the video product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with regard to proper PORTABLE CART WARNING Symbol provided by RETAC LAS 83125A 14 15 16 17 18 19 20 2il 22 3 grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna
70. red Tote YOR Menu e To cancel the point for A B incorrectly repeat e To cancel the point for A B repeat CD DISPLAY e To display the current O a e alse e To display the current disc mode time tape counter and mode channel DVD e To select the DVD output mode To select the DVD output mode O e To activate the remote e To activate the remote control in control in DVD mode DVD mode eTo select an item on the VCR Menu ENTER e To advance to the Installing the Batteries for O O eTo move the cursor and eTo move the cursor and next VOR Men determine its position determine its position To eTo go back one the Remote Control O step during clock and timer setting Install two AA batteries supplied f e To call up the Menu on a e To call up the file list To call up the VOR Nenu matching the polarity indicated inside disc MP3 WMA p battery compartment of the remote MODE eTo set black level on off e To arrange the playing order or e To set virtual surround play randomly control O on off e To set virtual surround on off OPEN CLOSE a e To open or close the disc e To eject the video MON tray To open or close the disc tray cassette irom ihe VGA gt 4 PAUSE J U eTo pause disc playback eS ain tape playback or pe harass aes one To pause disc playback open frame ata time Keep in mind the following when using T NEP m S ere the remote control o turn the unit on off o turn the unit o
71. rt accumulated on the video heads after a long period of use or the usage of rental or worn tapes can cause this problem If a streaky or snowy picture appears during playback the video heads in your unit may need to be cleaned 1 Please visit your local Audio Video store and purchase a good quality VHS Video Head Cleaner 2 If a Video Head Cleaner does not solve the problem please call our help line mentioned on the front page to locate an Authorized Service Center Hint e Remember to read the instructions along with the video head cleaner before use e Clean video heads only when problems occur WMA Windows Media Audio is a new audio codec developed by Microsoft in the United States of America Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories About the Video Cassettes and Discs Playable Video Cassettes Use only cassettes marked with this unit Playable Discs Playable Recorded DVD Video 1 2 3 5 9 Example Digital video Title 1 Title2 M PEG2 QS Blc il Plis li 4 pili da A DVD ReWritable Audio CD di te O 3 5 9 OISE Digital audio Audio CD J Example a4 Tack 1 gt rack 2 gt Tack 3 plte 4 apuca Pola ae 6 COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO Digital audio MP3 WMA Example or a Group 1 Group 2 x dise SE MP3 WMA 11 Ces Mack ma 2 aes 3 pl geeks la Sy Tack 8 ReWritable
72. ture MP3 WMA Playback MP3 WMA is a method of compressing files You can copy MP3 WMA files on CD R RWs from the computer and play the files on this unit Insert an MP3 WMA format disc then the file list will automatically appear on the TV screen Press MENU when you want to call up the file list again while MP3 WMA format disc is already inserted Y When selecting the folder DISC NAME ENTER Q O OF SO Q e Press B gt when you want to go to the next hierarchy e Press lt 4 when you want to go back to the previous hierarchy except for the top hierarchy 2 To cancel MP3 WMA playback press STOP W 1 Refer to Resume on page 15 On Screen Display Hint e Some selections may take a while to be recognized e Press TOP MENU to return to the first item e Folders are known as Groups files are known as Tracks e Folders and MP3 are displayed respectively as El and 3J e WMA files are accompanied by gt icon e A maximum of 255 folders or 999 files may be recognized in one disc e Up to 8 hierarchies can be recognized in one folder File in the 9th or deeper hierarchies cannot be played back This player recommends the files recorded under the following circumstances e Sampling frequency 44 1kHz or 48kHz MP3 WMA e Constant bit rate 32kbps 320kbps MP3 48kbps 192kbps WMA e For
73. ueenase 17 SeU E Repeat Random Programmed Playback s ssssssssssesees 18 E CONNECHOA Sii iaa 6 Repeat Playback Repeat A B Playback RF Outp t NNN muss ados 6 Random Playback Programmed Playback ccccoooooncconcooo 18 Hint for Cable Box or Satellite BOX oooonmmoninncccccnonicononcanannoo 6 E Special Settings src 19 Connection to an Audio SNS Misicaicnanraicn cda 6 Subtitle Language Audio Language Camera Angle CGonection to a TV pesiin ros 7 Black Level Setting Stereo Sound Mode Virtual Surround 19 E Preparation for US isc ii 8 DVD Setup A 20 Turn On the Unit for the First Time score cocida 8 LANGUAGE Setting neral ia 20 To Add or Delete Channnels cccecccesseceeresesereeneseserenenenesens 8 DISPLAY SS sandia eo dicas 21 e PP E enter ree 8 AUDIO Setting APP reo 21 E Function OVEIVIEW lt lt nianna naiiai iaaa 9 PARENTAL Setting espec eee 22 Front Panel MOC AOE ess dicas 9 OTHERS Setting nucleolo 22 VCR DVD SIGN rob 9 Reset to the Default Setting Except for PARENTAL Setting 23 Front amp Rear SEI AA on O aie poncasaaeecee 9 Remote Control arias 10 Information o Installing the Batteries for the Remote Control eee 10 E Troubleshooting Guide s1 scscssssssessessssessssessssessscesssensesenseneess 23 i E Specifications sssssssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennen 24 VCR Functions E Language Code LIST iii 24 O Playback PA 11 E Limited War
74. vision Reverse engineering or disassembly is prohibited Notice for Progressive Scan Outputs Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture In case of picture prob lems with 525 progressive scan output it is recommended that the user switch the connection to the standard definition output If there are questions regarding your TV set compat ibility with this 525p DVD player please contact our customer service center Note to CATV system installer This reminder is provided to call the CATV system installers attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground should be connected to the grounding system of the building as Close to the point of cable entry as practical Symbols Used in This Manual The following symbols appear in some headings in this manual Description refers to playback or recording of video cassette tapes he U lt J Description refers to playback of DVD Video discs Description refers to playback of Audio CDs 9 U Description refers to playback of MP3 files J dk Description refers to playback of WMA files Maintenance SERVICING e Please refer to relevant topics on the Troubleshooting Guide on page 23 before returning the product e f this unit b
75. you hear a lot of noises Turn the volume up then if you hear some signal sound from the radio in response to your pressing buttons on the remote control the remote control is working e Interference signal may be received Change the position and orientation of the unit Timer recording is impos e Make sure the Timer Recording is set correctly sible e Make sure O indicator on the front panel lights up If not press SUBTITLE T SET e Make sure the VCR clock is set correctly Cannot go into record e Make sure the tape has a record tab If needed cover the hole with adhesive tape mode e Activate this unit in VCR mode Press VCR on the remote control so that the VCR OUTPUT light is lit Playback picture is partially e Adjust tracking control for a better picture by pressing CHANNEL w a on the unit or SKIP CH gt gt A Ht4 y on the remote control noisy Cannot view a tape but e Head cleaning may be necessary Refer to AUTO HEAD CLEANING the audio is OK e Make sure the VCR is not in the Menu mode No or poor playback e Change the RF output channel to CH4 Then select the same channel on the TV picture e Fine tune your TV TV programs cannot be e Re check the ANT IN and ANT OUT connections See the front page and page 6 seen normally e Press VCR e Press VCR on the remote control to activate it in the VCR mode Check if the VCR OUTPUT light is lit then set it to the TV position by press ing VCR YOA

Sylvania DVC840G DVD VCR Combo User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents