Silvercrest SDB 2000 A1 Iron User Manual
Contents
1. e Check the care instructions on the labels of the clothing article whether and at which temperatu re the clothing article may be ironed Symbol Type of Material Temperature regulator Acrylic rayon viscose Silk wool polyester blended fabrics Cotton linen viscose Set the appropriate temperature setting with the temperature control O The control light for the temperature lights up When the control light goes out the chosen temperature has been reached e Wait until the temperature control light goes out e To moisten the material press the button for the water fog O This function is suitable for very dry crumpled or creased materials Steam Ironing Set the steam control to the desired steam strength setting lroning with Steam Spray The steam spray is especially suited to smoothing places in the laundry that are difficult to access e Raise the steam iron a little way e Press the steam spray button to release the steam spray Setting the Steam Iron Temporarily Aside A Fire Hazard Never leave the steam iron unattended when it is hot or switched on Set the temperature control to the position MIN Only put the steam iron down on its standing foot O fig 2 Putting the Steam Iron Away After Use e Remove the power plug from the power socket e Empty the water reservoir and clean the gliding sole O e Place the cool2. on purchase must be reported immediately after un packing the appliance at the latest two days after the purchase date Repairs made after the expira tion of the warranty period are subject to payment DES Ltd Units 14 15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel 0870 787 6177 Fax 0870 787 6168 e mail support uk kompernass com CE Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Standard call rates apply Mobile operators may vary e mail support ie kompernass com
3. chamber dry the gilding sole thoroughly For this purpose wipe the gilding sole a few times on a towel or an old cloth e Allow the iron to cool down before storing it away O Note The effect of the self cleaning function can diminish after extended usage of the iron We therefore re commend the addition of decalcification agent into the water tank Casing A Danger of injury Pull the mains power plug before cleaning There is a risk of electrical shock Allow the device to cool off Danger of burning e Clean the casing only with a soft dry cloth e Do not use aggressive or chemical cleaning agents Metal Parts e Clean the metal parts with a cloth slightly moistened with water and a mild non foaming cleaning agent Troubleshooting The steam iron puts out only little or no steam The water reservoir in the steam iron is empty Fill the water reservoir with tap water see Filling with Tap Water The steam iron does not get hot The steam iron is not plugged in or not switched on Plug the power plug into the power socket and set the temperature control to the desired temperature The steam iron is defect Have the defect steam iron repaired by qualified technicians Technical Data 220 240 V 50 Hz 1600 2000 W Power Supply Voltage Output Disposal Do not dispose of the appliance in your A mua subject to the European guideline 2002 96 EC normal domestic waste
4. qualified technician or by our Customer Service Depart ment to avoid the risk of injury Only pull on the power plug and never on the cord Never bend kink or crush the power cord Ar range it in such a way that it can not come into contact with hot surfaces and such that no one can step on it or trip over it Always remove the power plug from the power socket after every use and when cleaning or filling Always unroll the power cord fully before swit ching on and do not use an extension cord Never touch the cord or the power plug with wet hands Under no circumstances should you submerge the steam iron in any liquid or let any liquid into the device casing of the steam iron You should never expose the appliance to moisture or use the device outside Should any liquid get into the appliance casing remove the power plug imme diately from the power socket and have the ap pliance repaired by qualified technicians Never use the steam iron near water in the bathtub shower wash basin or other vessels Nearby water presents a danger even when the appliance is switched off You may never open the steam iron casing Have the defect steam iron repaired by qualified technicians Discontinue using the iron if it has fallen down shows signs of visible damage or leaks water A Important e Should the care instructions for a clothing article not mention ironing Symbol you should not iron that clothing article You coul
5. SILVER CREST 6 Steam Iron SDB 2000 A1 Steam Iron Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr SDB2000A1 06 10 V2 SDB 2000 Al CONTENT PAGE Basic Safety Instructions 2 Items supplied 3 Proper use 3 Before the First Use 3 3 3 Operating Elements Operation Filling with Tap Water usenssssennensssensensensensennennennnnnsensensennennsnennsnnnensenssnnennsnnsn 3 Plugging In and Ironing Steam Ironing Ironing with Steam Spray Putting the Steam Iron Away After Use Drip Stop Function 4 4 5 Setting the Steam Iron Temporarily Aside iC 5 5 5 Cleaning SelPcleaning funcion di idas 5 Troubleshooting Technical Data Warranty amp Service 6 6 Disposal 6 7 7 Importer Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference Pass this manual on to whoever might acquire the appliance at a future date le STEAM IRON Basic Safety Instructions s Risk of Burning e Grasp the steam iron only by the handle when the iron is hot This appliance is not intended for use by persons including children with reduced physical sen sorial or mental cabilities or lack of experience and knowledge unless
6. This product is Dispose of the appliance through an approved dis posal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre EE Dispose of all packaging materials in an environmentally responsible manner Warranty amp Service Importer The warranty for this appliance is for 3 years from KOMPERNASS GMBH the date of purchase The appliance has been ma BURGSTRASSE 21 nufactured with care and meticulously examined be 44867 BOCHUM GERMANY fore delivery Please retain your receipt as proof of purchase In the event of a warranty claim please www kompernass com make contact by telephone with our Service Depart ment Only in this way can a postfree despatch for your goods be assured The warranty covers only claims for material and maufacturing defects but not for transport damage for wearing parts or for damage to fragile compo nents e g buttons or batteries This product is for private use only and is not intended for commercial use The warranty is void in the case of abusive and improper handling use of force and internal tampe ring not carried out by our authorized service branch Your statutory rights are not restricted in any way by this warranty The warranty period will not be extended by repairs made under warranty This applies also to replaced and repaired parts Any damage and defects extant
7. d otherwise cause damage to the clothing article e You may only fill the water reservoir with tap water You will otherwise damage the steam iron e You may not clean the steam iron with solvents alcohol or abrasive cleaning agents You could otherwise cause damages Proper use The steam iron is strictly intended for ironing clothes You may only use the iron in a closed room and in the private household All other use is deemed improper use Items supplied Steam iron Measuring beaker Operating instructions Before the First Use e Remove the steam iron from the packaging e Remove all stickers and films from the steam iron and the gliding sole A Important Plastic bags can present a danger To avoid any danger of suffocation keep this bag away from babies and children e Plug the power plug into a power socket of 220 230 V 50 Hz e Hold the steam iron horizontally Set the temperature control to the position MAX e Heat the steam iron for several minutes on the highest setting Press the button a few times for the steam blast 6 e Iron on a piece of scrap material to remove any possible unclean patches from the gliding sole Operating Elements Figure 1 Movable cable guide O Temperature control light 6 Standing foot G Gliding sole O Water nozzle Filler opening for the water reservoir 7 Steam amount control O Button for the steam spray O Button for wa
8. steam iron horizontally on a soft clean base Drip Stop Function With conventional steam irons it can happen that water drips from the iron sole at too low ironing temperatures This iron however possesses a new equipment characteristic the Drip Stop function At low temperatures the iron automatically switches off the supply of water for generating steam for steam blast and steam ironing When this happens a CLICK is to be heard This prevents water dripping from the soleplate You must then re set a suitable temperature with the temperature controller As soon as this is reached steam production is continued Additionally if you set the steam iron down or just let it cool off the drip stop function prevents water leakage from the soleplate Cleaning Self cleaning function e Fill the water container up to the marking MAX e Insert the plug into the power socket Set the temperature regulator to the position MAX e Let the iron warm up till the control light O cuts off and lights up again e Hold the iron horizontally over a trap vessel Set the steam regulator to Self Clean position and hold it in this position Now steam and boiling water will start emerging from the steam escape holes at the gilding sole Any dirt if present will get washed out Release the steam regulator as soon as the water in the water container is used up e To ensure that no water remains in the steam
9. ter fog O Temperature control O Handle O Measuring cup Operation Filling with Tap Water e When it is cool place the steam iron in a horizontal position on its gliding sole O Open the filler opening for the water reservoir Fill the reservoir with tap water using the measu ring cup B at most to the MAX marking Notice Should the mains water at your locality be rated as hard it is recommended that you mix mains water with some distilled water Otherwise the jets for the steam blast function could calcify become blocked prematurely To extend the optimal steam blast function mix mains water with distilled water according to the table Ratios distilled water to mains Water hardness very soft soft The water hardness level can be queried at your local water works Close the water reservoir filler opening O making sure it clicks shut Plugging In and Ironing You can dry iron without steam at all temperatures Steam ironing is first possible at level 2 we however recommend level 3 should be used for steam ironing because at this level the temperature to generate steam is optimal e Plug the power plug into a power socket of 220 230 V 50 Hz A Important Should the care instructions for an article of clothing not mention ironing Symbol 5J you should not iron that clothing article You could otherwise cause damage to the clothing article
10. they have been given supervision or instruction concerning use of the s appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Never hold your hand over the steam spray or on hot metal parts You may not open the filler opening of the water reservoir while the iron is in use Allow the steam iron to cool down first and remove the power plug from the power socket A Fire Hazard Never leave the steam iron unattended when it is hot or switched on Only ever store the steam iron away once it has cooled down Only ever iron with the temperature settings instruc ted by the care instructions for the material You could otherwise cause damage to the material If you do not know the care instructions start with the lowest temperature setting Grasp the steam iron only by the handle when the iron is hot Never let children use the steam iron Place this iron only on a stable and heat resistant surface Use this iron only on a stable and heat resistant surface for example on an ironing board A Danger of Electrocution The mains voltage at the mains socket must match that shown on the rating plate on the device If the connection lead or device does not work perfectly or is damaged have it examined and repaired immediately at the service centre Arrange for defective power plugs and or cables to be replaced as soon as possible by a
Download Pdf Manuals
Related Search