Silva SEA DATA Marine Radio User Manual
Contents
1. 3 2 Log functions 3 2 1 Boat speed The main functions displays the boat speed The unit Knots or Miles h is selectable during calibration see 4 2 4 3 2 2 Water temperature To view water temperature press UP or DOWN until the text TMP is displayed The water temperature can be displayed in Celsius or Fahr enheit To change unit see 4 2 8 3 2 3 Trip distance To view the trip distance press UP or DOWN until the text TRP is dis Id uf 3 T FH I played To clear the trip distance press UP and DOWN together Range 0 199 99 Nm 3 2 4 Total distance To view the total distance press UP or DOWN Total distance is not g IE q LT possible to clear and will be stored in the instruments permanent memory Range 0 19999 99 Nm 3 2 5 Depth To view depth press UP or DOWN until the text DPT is displayed The depth function is only displayed if instrument type is set to g 3 m combi To change instrument type see 4 2 3 3 3 Illumination The LCD and push buttons have three levels of illumination To turn E DEF on light press MODE until the text Lit appears Change level with Ld UP or Down and lock selection with KEY Sea Data Star English 3 4 Depth functions optional To change between Log and Depth information press MODE This function will display depth in metres feet or fathoms To change unit see 4 2 6 A depth sounder measures the time it takes for a sound pulse transmitted from the transducer to boun2. 4 1 Entersand exit Gallbr tiON ciclo dato une 4 2 Calibration groups 4 2 1 C10 Return RET 4 2 2 C1 1 Damping SEAMIB 82 ana nen 4 2 3 C12 Instrument type Type LOG 0cocococcccoccccononccconanccononcnnonnnn conocia nono ncn nana rr r narr nn en 10 4 2 4 C13 Unit for speed Unit KTS 4 2 5 C14 Speed calibration 1 20 CAL 10 4 2 6 C15 Unit for depth Unit M een 4 2 7 C16 Adjusting depth 0 00 ADJ 11 4 2 8 C17 Unit for temperature Unit C 11 4 2 9 C18 Temperature adjustment 0 C TMP 2200022400nsnnnnnsnnnennnnnennnnennn 11 4 2 10 C19 Unit for trip and total distance Unit NM oooonccconnccccnnncccconcccnnonancncnnancnnnnncan 11 4 3 Customise your display 5 Warranty std English Star Sea Data 1 Introduction Thank you for choosing Star SEA Data SEA Data is a digital instrument which will display all necessary data from the SEA SEA Data is as standard a log instrument providing you information about speed trip distance total distance and water temperature As an option a depth transducer can be connected giving you depth shal low and deep alarm The two transducers are connected to the back of the instrument They are easy to install due to the colour coded 4 pole jack plugs The display is divided into two lines main function and sub function The main function displays ei ther speed or depth The sub fu
3. Four for the screw connector for the log transducer and four for the depth transducer The connector is colour coded with green yellow white and ground sign Connect the four wires from the log transducer according to the colours to the connector for LOG the blank wire is ground If a depth transducer is connected use the DEPTH connector for that Power supply is either connected to green and ground for DEPTH or LOG Yellow White Green Black Red Screen Log transducer and power supply Log and depth transducers and power supply Connect a 5 Ampere fast fuse between the power battery and instrument on the red plus lead Sea Data Star English 3 Function overview The SEA Data instrument can work as a log instrument a depth instrument or as a combined log depth instrument You simply select the type of instrument you want during calibration 3 1 How to use the push buttons 3 1 1 Mode Light button This button is used to change between Log mode and Depth mode One short press changes between the two modes To select light levels press mode for more than two seconds 3 1 2 Down button 3 1 3 Up button This button is used to move up in the sub function list or to increase a value in set mode 3 1 4 KEY button This button is used to lock unlock a value to be able to change it 3 1 5 Clear To clear a value or reset trip distance press UP and DOWN together Ev amp English Star Sea Data
4. again if the boat is taken to deeper water 2 m more than the limit 3 4 5 Activate Deactivate an alarm To activate deactivate an alarm go to the alarm function an press g 5 ES ea i a 2 SHA DOWN together If an alarm is active the present alarm value is dis played together with the text SHA or DEP If the alarm is deactivated the text SHALLOW or DEEP is displayed instead The alarm value is stored in the memory even if the alarm is deactivated English Star Sea Data 4 Calibration In calibration mode there is a list of nine calibration values and set up modes The list starts at C10 and stops at C18 Calibration related to the speed transducer has the text ST after calibration number and the depth transducer has the text DT To move to the desired calibration group press UP and DOWN as required 4 1 Enter and exit calibration To enter the calibration mode press KEY until the text C10 RET ap pears RET stands for return To exit calibration press KEY in C10 RET return 4 2 Calibration groups 4 2 1 C10 Return RET ET To exit calibration press KEY in this when the text RET is displayed RE 4 2 2 C11 Damping SEA MID Damping is used to get the most stable reading for the situation De 5 E A m pending on the weight ofthe boat and the sea conditions you may want to change the dampening of the reading If SEA MAX is used an average of the speed over a longer period will be displayed This func tion
5. the instrument so it can be re moved for inspection without having to disconnect attached cables Do nat place sealant behind the instrument The instrument gasket eliminates the need for sealant Do nat run cables in the bilge where water can appear Do nat run cables close to the fluorescent light sources engine or radio transmitting equipment to avoid electrical disturbances Do nat rush take your time A neat installation is easy to do e The following material is needed Wire cutters and strippers Large Philips and small flat head screw driver Hole saw for the instrument clearance hole 63 mm 21 Hole saw for the transducer fitting hole 43 mm 1 5 2 8 mm 7 4 drill for the mounting holes Plastic cable ties Silicon sealing for use under water not supplied If you are doubtful about the installation obtain the services of an experienced technician 2 1 Installing the instrument e Place the adhesive drill template in the desired position for the instrument Drill the four screw holes using a 2 8 mm Vea drill Use a 63 mm 2 h hole saw to cut the clearance hole for the instrument connection socket Note Never drill through the instruments four mounting holes as the gasket may be dam aged and thus cause leakage The warranty is not valid for damage caused by drilling through the mounting holes 2 2 Installing transducer The log and depth transducers need to be positioned carefully The
6. transducer must remain in the water at all speeds Turbulent water causing air bubbles must be avoided The best position for the log and depth transducers is as close to the centre line of the boat and as far forward as possible The transducer must always remain submerged in the water Power boats The waterline of fast power boats shortens considerably at high speeds Therefore the transducer should be placed at 25 30 from the front line of the waterline at full speed Sail boats Boats with a fin keel must have the transducer located at least 250 mm 1 ft but not more than 750 mm 3 ft in front of the keel and no more than 100 mm off the centre For boats with full keel it might be impossible to locate the transducer at the centre line If the transducer is off centre the angle of the paddle wheel should meet the bow The log and depth transducers have the same through hull fitting De cide where to position the transducer and cut a 43 mm 1 he hole with a hole saw Use sand paper to smooth the surface Clean the sur face around the hole on both sides of the hull Use silicon paste for un der water use and spread it on the through hull fitting English Star Sea Data Due to different shapes of hulls the log transducer has to be calibrated on all boats See 4 2 5 For mounting of depth transducer see instruction included with transducer 2 3 Electrical installation On the back of the instrument there are eight pins
7. trip and total distance Unit NM The unit for distance is selectable between Nautical Miles NM Kilome tres KM and Miles MI To change unit press KEY and select unit with UP or DOWN and confirm with KEY 11 English Star Sea Data 4 3 Customise your display The two main functions have one empty sub function One sub func tion from the other main function group can be moved into this empty space For ex ample the trip distance can be moved to the depth group To do that go to the trip function and press KEY and MODE together the display is flashing Go to the depth functions by pressing MODE and lock with KEY It is possible to move two functions one under speed and one under depth The last customised display is the display the instrument starts up in after power on If you want the instrument to start up displaying speed and trip after power on go to the trip function under speed and press KEY and MODE together The display will be flashing lock with KEY 12 Sea Data Star English 5 Warranty WARRANTY GENERAL All our products are designed and built to comply to the highest class industry standards If the products are correctly installed maintained and operated as described in the installation and operation manual they will provide long and reliable service Our international Network of distributors can provide you with the information and assistance you may require virtually anywhere in the wor
8. will not effect the update rate of the display 4 2 3 C12 Instrument type Type LOG The Star SEA Data instrument can either be operating as a log E y P E I IR instrument LOG a depth instrument DPT or as a combined log depth instrument ALL There is also a demonstration mode built into the instrument DEM If LOG is selected only log functions will be displayed If DPT is selected only depth functions will be displayed In demonstration mode DEM all values are simulated without any trans ducers connected Note Trip and total distance will not be stored in the permanent memory after power off in demonstration mode 4 2 4 C13 Unit for speed Unit KTS The unit for speed is selectable between knots KTS Hi ru E K re kilometres hour K h or Miles hour M h To change unit press KEY and select unit with UP or DOWN and confirm with KEY 4 2 5 C14 Speed calibration 1 20 CAL Because of different shapes of the hull the instrument has to be Id m fe FAI calibrated This calibration will effect speed trip and total distance UL The range for the calibration is 1 00 1 99 where The calibration value will be multiplied with the speed To calibrate your log run the boat at normal speed a measured distance Compare the distance with the trip distance Calculate the calibration value with the following formula 10 Sea Data Star English True distance from sea chart Log trip counter distance The current calibration va
9. Star Sea Data Installation and User Manual English E English Star Sea Data SODA SILVA This manual is written for Silva Star Sea Data Edition May 2004 Sea Data Star English 1 ae aT AATE IEE TT AT T TEATE 1 1 Specifications 1 1 P rt Specifications triana 4 2 Installation cece ETTET TETT TT TTET 4 2 1 Installing the instrumenta iii died 5 2 2 Installing transducer 3 3 222 22 sel 5 2 3 Electrical installation icccc ccsscseccscedensteesececeseesnecherseosneecaneeatecncedensesetonsossunnseseneenecapacedeneneos 6 3 FUNCTION overview uuennsssnnsnnnnnsnnnnnnnnnnnnnnnnnnnnnnnnnnsnnnnnnnnnnnnsnnnnsnnnnnnnnsnnrnnnnnsnnrnnnnnsnnnsnennsnnrnnnnnnnnn 7 3 1 How to Use the push bullons rue ae es an 7 3 1 1 Mode Eight button een 7 3 1 2 DoWA bUt OM ESN E E dramas EN E A ende Tante sahen 7 3 1 3 3 1 4 3 1 5 3 2 A P A E E A E E ETA 8 3 2 1 B at Speed tii di ds aioe 8 3 2 2 Water temperature cio ld ae Le eldest ty rd 8 3 2 3 Trip diStanCe cita rannte 8 3 2 4 Total distancia Eis E Ag ie ees EN ee Re 8 3 2 5 Depth iii 2er een mir Aen aie dane arene eee 8 3 3 U ET a R OM ee O 8 3 4 Depth functions optional viii it 9 3 4 1 Boat speed 3 4 2 Shallow alarm 3 4 3 A east heed Anaad ane 3 4 4 Sileneing an ala ox recess Seats csc ra sed area 3 4 5 Activate Deactivate an alarm 4 AAA A A A E TA A EE
10. ar Sea Data File id WARRANTY CARD TO BE RETURNED TO YOUR NATIONAL DISTRIBUTOR OWNER Name Street City Zip Code Country Product name Serial number ABC Date of purchase _________________ Date installed Dealers stamp Tick here if you do not wish to receive news about future products 14 Copyright O Silva Sweden AB Kuskv gen 4 191 62 Sollentuna Sweden Tel 46 0 8 623 43 00 Fax 46 0 8 92 76 01 www silva se 22172 3 Edition 2
11. ce on the bottom and be received by the transducer again The strength of the sound pulse decreases with the depth and is also affected by temperature and pollution in the water A soft bottom with a lot of vegetation will also decrease the strength of the echo which can result in poor reception by the receiver If no echo is registrated the depth reading will be three dashes i e no echo 3 4 1 Boat speed ee q TAE To view boat speed press UP or DOWN until the text BSP is dis L ala played The unit Knots or Miles h is selectable in calibration see 4 2 4 3 4 2 Shallow alarm T To get to the shallow alarm function press UP or DOWN until the R Poy md text H L _LIW SHALLOW is displayed To change the alarm value unlock with KEY increase decrease the value with UP DOWN move to the next figure with MODE button and lock the value again with KEY 3 4 3 Deep alarm d F Ej fd To get to the deep alarm function press UP or DOWN until the text DEEP is displayed To change the alarm value unlock with KEY increase decrease the value with UP DOWN move to next figure with MODE button and lock the value again with KEY The alarm is activated 3 4 4 Silencing an alarm If a shallow alarm limit is reached the instrument will display depth on the top row and the alarm limit flashing on the bottom row To silence the alarm press any button or steer the boat to deeper water The alarm will be automatically activated
12. ld Please read through and fill in this warranty card and send it to your national distributor for product registration LIMITED WARRANTY The warranty covers repair of defective parts due to faulty Manufacturing and includes labour when repaired in the country of purchase The warranty period is stated in the product manual and commences from the date of purchase The above warranty is the Manufacturer s only warranty and no other terms expressed or implied will apply The Manufacturer specifically excludes the implied warranty of merchantability and fitness for a particular purpose CONDITIONS e The supplied warranty card and receipt with proof of purchase date must be shown to validate any warranty claim Claims are to be made in accordance with the claims procedure outlined below The warranty is non transferrable and extends only to the original purchaser The warranty does not apply to Products from which serial numbers have been removed faulty installation or incorrect fusing to conditions resulting from improper use external causes including service or modifications not performed by the Manufacturer or by its national distributors or operation outside the environmental parameters specified for the Product e The Manufacturer will not compensate for consequential damage caused directly or indirectly by the malfunction of its equipment The Manufacturer is not liable for any personal damage caused as a consequence of using its e
13. lue New calibration value zor rm If you suspect that there is water flow drive the boat in both directions and divide the trip distance by two To enter the new calibration value press KEY increase decrease with UP DOWN move to the next figure with MODE and confirm with KEY 4 2 6 C15 Unit for depth Unit M The unit for depth is selectable between metres M feet FT or vt E m fathoms uno il I FA To change unit press KEY and select unit with UP or DOWN and confirm with KEY 4 2 7 C16 Adjusting depth 0 00 ADJ It is possible to adjust the depth reading plus minus 99 9 m This feature makes it possible to get the reading from either the keel or In E DF the water surface u L Example Your boat has a draft of two metres and the transducer is mounted one half metre below the water surface 1 If you want the reading from the water surface you have to add 0 5 m 2 If you want the reading from the keel you have to subtract 1 5 m Note Calibration should be carried out in the same unit chosen for dis play 4 2 8 C17 Unit for temperature Unit C o The unit for temperature is selectable between Celsius C or O x I Fahrenheit F To change unit press KEY and select unit with UP or DOWN and confirm with I KEY 4 2 9 C18 Temperature adjustment 0 C TMP The temperature reading can be adjusted for accurate reading I Li plus minus nine un En m degrees 4 2 10 C19 Unit for
14. nctions are divided into two lists one under each main function 1 1 Specifications Speed 0 30 knots 0 45 knots with optional high speed paddle wheel Trip distance 0 199 99 Nm resetable Stored in permanent memory Total distance 0 19999 99 Nm non resetable Stored in permanent memory Depth 0 5 150 m Deep alarm Adjustable Shallow alarm Adjustable 1 1 Part specifications Star SEA Data is delivered with all mounting material Make sure all these parts are in the pack age QTY ITEM QTY ITEM 1 Instruction for use 1 Drill template 1 Warranty card 4 Mounting screws 1 Instrument SEA Data 4 Rubber plugs 1 Instrument cover 1 Red and black power supply cable 3m 1 Back cover 1 Bag with wire protectors and silicon paste 1 Screw connector 2 Installation e The installation includes 6 major steps Read the installation and operation manual Plan where to install the transducer and instrument Install the transducer then the instrument Run the cables Take a brake and admire your installation Learn the functions and calibrate your instrument DAPON e Before you begin drilling think about how you can make the installation as neat and sim ple as your boat will allow Plan where to position the transducers and instruments Think about leaving space for additional instruments in the future Sea Data Star English A few do not s you should consider Do not cut cables too short Allow extra cable length at
15. quipment e The Manufacturer its national distributors or dealers are not liable for charges arising from sea trials installation surveys or visits to the boat to attend to the equipment whether under warranty or not The right is reserved to charge for such services at an appropriate rate e The Manufacturer reserves the right to replace any products returned for repair within the warranty period with the nearest equivalent if repair within a reasonable time period should not be possible e The terms and conditions of the warranty as described do not affect your statutory rights CLAIMS PROCEDURE Equipment should be returned to the national distributor or one of its appointed dealers in the country where it was originally purchased Valid claims will then be serviced and returned to the sender free of charge Alternatively if the equipment is being used away from the country of purchase it may be returned to the national distributor or one of its appointed dealers in the country where it is being used In this case valid claims will cover parts only Labour and return postage will be invoiced to the sender at an appropriate rate DISCLAIMER Common sense must be used at all times when navigating and the Manufacturer s navigation equipment should only be considered as aids to navigation The Manufacturers policy of continuous improvement may result in changes to product specification without prior notice 13 English St
Download Pdf Manuals
Related Search