Sharp LC-22LE520X Flat Panel Television User Manual
Contents
1. 7 21 Supplying electric power to the antenna 7 Teletext function 22 Initial auto installation 7 PC Control of the TV 22 Checking Signal information 7 PC compatibility chart 23 Auto installation 8 RS 232C commands list 23 Programme setup 8 Selecting a preset AV mode 10 Specifications Menu operation 2 ssasssssasusassaqakasussusaswusaq 10 Dimensional drawings 26 Picture menu iaia 11 CLEARING THE PASSWORD 27 Audio 11 1 Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product To ensure safety and many years of trouble free operation of your product please read the Important Safety Precautions carefully before using this product Important Safety Precautions e Cleaning Unplug the AC cord from the AC outlet before cleaning the product Use a soft damp cloth to cle2. 4 3 mode menu To set the type of the wide screen select Panorama or Normal in the 4 3 mode menu See page 14 4 3 mode set to Panorama 4 3 mode set to Normal e f the broadcast signal contains no WSS information Auto Selection will not function even when the WSS option is enabled Manual Selection You can select different picture sizes that account for the kind of each picture Press WIDE The WIDE MODE menu displays e The menu lists the wide mode options selectable for the type of video signal currently received Press WIDE or A W while the WIDE MODE menu displays on the screen As you toggle down the options each mode is immediately reflected on the TV Selected item Description Normal For 4 3 standard pictures A side bar appears on each side For 14 9 letterbox pictures A thin side bar appears on each side and you may also see bars on the top and bottom with some programmes Zoom14 9 Panorama In this mode the picture is progressively stretched toward each side of the screen Full For 16 9 squeeze pictures Cinema16 9 For 16 9 letterbox pictures Bars may appear on the top and bottom with some programmes For 14 9 letterbox pictures Bars may appear on the top and bottom with some programmes Displays an image with the same number of pixels on the screen only when receiving a 1080i 1080p SXGA SXGA signal Display with an Underscan image only when rece
3. Setup No signal off Enable Option No operation off 3hr Ecology 6 No signal off You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals such as the end of a broadcast day Enable Disable Five minutes before the power shuts down the remaining time displays every minute Disable is the factory preset value When a TV programme finishes and the TV receives signal input this function may not operate Bl Power management PC input mode only You can set the TV to automatically power off when no image is displayed on PC Selected item Description Off No power management Factory preset value f no signal inputs for approximately 8 minutes the power shuts down Even if you start using the PC and the signal inputs again the TV stays off The TV turns on again by pressing POWER See page 7 e If no signal inputs for approximately 8 seconds the power shuts down When you start using the PC and the signal inputs again the TV turns on The TV turns on again by pressing POWER See page 7 Bl No operation off You can set the TV to automatically power off when no TV operation is performed for more than 3 hours 30min 3hr Disable Five minutes before the power shuts down the remaining time displays every minute Disable is the factory preset value ll Ecology When
4. ll Colour system You can change the colour system to one that is compatible with the image on the screen Auto PAL SECAM NTSC 3 58 NTSC 4 43 PAL 60 SS NOTE e f Auto is selected colour system for each channel is automatically set If an image does not display clearly select another colour system e g PAL e Colour system is selectable only when inputting an S VIDEO or composite signal Bl Fine sync PC input mode only Adjusting the PC image automatically Auto sync This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable etc E e Auto sync is likely to succeed when an input PC image has wide vertical stripes e g pattern with high contrast stripes or cross hatched It may fail when an input PC image is solid low contrast Be sure to connect the PC to the TV and switch it on before starting Auto sync H Position Centres the image by moving it to the left or right Centres the image by moving it up or down Adjusts when the image flickers with vertical stripes Adjusts when characters have low contrast or when the image flickers V Position For resetting all adjustment items to the factory preset values press A W to select Reset press ENTER press lt gt to select Yes and then press ENTER Images may not
5. INPUT SELECTION B I N P 4 O INPUTA Auto W I D E 4 _ FULL AV I NIP 4 2 INPUT4 S VIDEO WII D E 5 CINEMA 16 9 AV I NIPI4I3 INPUTA VIDEO WII D E 6 CINEMA 14 9 AV AV MODE A V M D 0O TOGGLE W D E 7 NORMAL PO SELECTION A vIM p 1 STANDARD w i o E 9 FUL PO A VIMID 2 MOVIE W D E 1 0O DOT BY DOT AV PC A VIMIDI3 GAME W I D E 1 1 UNDERSCAN AV A VIMID 4 USER MUTE MJ U T E O TOGGLE A VIMID 5 _ _ DYNAMIC FIXED M U T E 1 MUTE ON A VIMIDI6 DYNAMIC MJ U T E 2 MUTE OFF A VIMID I7 1 PC SURROUND A C S UJ O SURROUND TOGGLE A C S U 1 SURROUND ON A C S U 2 _ SURROUND OFF AUDIO CHANGE TOGGLE SLEEP TIMER O F T M al ul GFF 1 SLEEP TIMER 30 MIN O F TIM 2 SLEEP TIMER 1 HOUR O F T M 3 SLEEP TIMER 1 HOUR 30 MIN S NOTE O F TIM 4 SLEEP TIMER 2 HOUR O F TIM 5 _ SLEEP TIMER 2 HOUR 30 MIN f an underbar appears in the parameter column enter a Space TEXT TIE X T O TEXT OFF f an asterisk appears enter a value in the range T E X T 1 TEXT CHANGE TOGGLE indicated in brackets under CONTROL CONTENTS D c P G DIRECT PAGE JUMP 100 899 23 Appendix Troubleshooting The problems described belo
6. R Not for children under age 18 Strong elements of sex and or violence No block Cancel the blocking When the country setting is set to New Zealand or Singapore Block 5 age and below Block 11 age and below Block 13 age and below Block 15 age and below Block 17 age and below Block 18 age and below No block Bl Input skip This setting allows you to skip the HDMI or RGB input on the input source selection operation INPUT1 HDMI INPUTA HDMI INPUT3 HDMI INPUT7 RGB Skip input selection of HDMI Bl Input label You can assign each input source a label as you prefer Press TV VIDEO to select the desired input Source Press MENU and the MENU screen displays Press lt p to select Setup Press to select Input label and then press ENTER Press A W 4 p to select a desired alphanumeric and then press ENTER Repeat until the name is fully spelt out Maximum 6 alphanumeric can be input External equipment name settings IBCDEFGH J CLEAR KLMNOPQRST BACK UVWXYZ _ 0123456789 END To exit select END and then press ENTER If the wrong alphanumeric is entered select CLEAR to clear and then press ENTER You cannot change labels if the input source is ATV and DTV H Position For adjusting a picture s horizontal and vertical position Selected item H Position Description Centres the image by moving it to the le
7. Directly select the PC terminal ress Of utes sound 21 MENU Press 1X again Restores sound Mute will be cancelled after 30 minutes However the TV Display the menu screen will not suddenly output loud sound as the volume level 22 A Y lt P Cursor will be set to 0 automatically Increase the volume level by Select a desired item on the setting screen pressing VOL ENTER 2 0 9 Execute a command Set the channel 23 RETURN I TELETEXT mode Set the page See page 22 MENU mode Return to the previous menu screen 3 Flashback 24 TELETEXT Press 5 to return to the previous selected channel or Select the TELETEXT mode all TV image all TEXT external input mode image TV TEXT image See page 22 4 WIDE Reveal hidden for TELETEXT Change the wide image mode See page 21 TELETEXT mode Display hidden characters See page 22 5 VOL VOL SUBTITLE for TELETEXT Set the volume To turn the subtitles on See page 22 VOL 4 Increase the volume Hold VOL Decrease the volume TELETEXT mode Stop updating Teletext pages 6 FREEZE automatically Press again to release the hold mode Freeze a motion picture on the screen See page 21 See page 22 7 EXIT Subpage Return to the default screen Display the Teletext subpage directly when in Teletext 8 Colour Red Green Yellow Blue mode See page 22 TELETEXT mode Select a page See page 22 Top Bottom Full 9 EPG TELETEXT mode Set the
8. internal temperature has increased Remove any objects blocking the vent or clean Check the ECO setting See page 12 e Is the sleep timer set See page 5 No picture No sound s the connection to external equipment correct See page 4 Has the input signal setup been performed correctly after connection See page 15 e Is the correct input selected s the picture adjustment correct See page 11 e Is the antenna connected properly See page 3 s On selected in Audio only See page 15 e Is the volume too low See page 5 Make sure that headphones are not connected The TV sometimes makes a cracking sound This is not a malfunction This happens when the cabinet slightly expands and contracts according to changes in temperature This does not affect the TV s performance Cautions regarding use in high and low temperature environments When the unit is used in a low temperature space e g room office the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal Do not leave the unit in a hot or cold location Also do not leave the unit in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the LCD panel to malfunction Storage temperature 20 C to 60 C 9 24 Specifications Item LC 22LE520X LCD p
9. place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed The LCD panel used in this product is made of glass Therefore it can break when the product is struck forcefully or with a sharp object If the LCD panel is broken be careful not to be injured by broken glass Heat sources Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers To prevent fire never place any type of candle or naked flames on the top or near the TV set To prevent fire or shock hazard do not place the AC power cord under the TV set or other heavy items Do not place heavy objects on this product or stand on it Doing so could cause injury if the product overturns Take special care near children and pets The LCD panel is a very high technology product with 2 073 600 pixels giving you fine picture details Due to the very large number of pixels occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red This is within product specifications and does not constitute a fault Precautions when transporting the TV When transporting the TV never carry it by holding or otherwise putting pressure onto the display Be sure to always carry the TV by two people holding it with two hands one hand on each side of the TV Do not display a st
10. set to Yes the TV activates the following power saving mode e OPC set to On Page 11 No signal off set to Enable Page 12 e Power management set to Mode Page 12 No operation off set to Shr Page 12 Quick start set to Off Page 14 Ecology mode cannot be deactivated by selecting No Each setting must be changed individually to deactivate Ecology mode 12 MENU Setup w Setup Auto installation Option Digital Programme Setup Child lock Input skip Position wss On 4 3 mode Panorama Quick start Off Text language West Europe Identification Reset lll Child lock ATV and DTV input mode only Allows you to use a password to protect certain settings from being accidentally changed Setting a password Repeat steps 1 to 2 in Menu operation Press to select Child lock and then press ENTER If you already set the password enter it here Press A V to select Change password and then press ENTER Enter the 4 digit number as a password using 0 9 Change password Enter your new password Use 4 digits G Clear password G Parental rating New password IB Reconfirm Enter the same 4 digit number as in step 5 to confirm To view a locked channel Lock setting in Analogue programme setup Manual adjust is set to On you must enter a password When you select a locked channel Chil
11. the double D symbol are trademarks of Dolby Laboratories e Products that have earned the ENERGY STAR are designed to protect the environment through energy efficiency 2 Attaching the stand e Before attaching or detaching the stand unplug the AC cord from the AC outlet Before performing work spread cushioning over the base area to lay the TV on This will prevent it from being damaged Confirm the screws supplied with the TV Screws x3 used in step 3 Insert the stand base to the stand post on the bottom of the TV Insert and tighten the 3 screws into the 3 holes on the bottom of the stand base To detach the stand perform the steps in reverse order Setting the TV Connecting the antenna cable To enjoy a clearer picture use an outdoor antenna Connecting the AC cord To AC INPUT terminal Standard DIN45325 plug IEC169 2 75 ohm coaxial cable round cable Antenna cable commercially available antenna Room antenna terminal terminal 75 ohm type TO PREVENT RISK OF ELECTRIC SHOCK DO NOT TOUCH UN INSULATED PARTS OF ANY CABLES WITH AC CORD CONNECTED Connecting external devices You can connect many types of external equipment to your TV like a VCR game console camcorder DVD player Digital TV STB Set Top Box and PC To view external source images select the input source from TV VIDEO on the remote control unit or T
12. 9 What is an EPG An EPG Electronic Programme Guide is a programme schedule which is displayed on the TV screen The EPG is broadcasted together with DTV The TV screen shows the EPG when the viewer presses EPG on the remote control provided that the TV is receiving the digital broadcasting signal The EPG enables you to search for a programme do timer view the programme schedule in detail aration B JCTr auor ll Display the EPG screen D Press EPG FREEZE MENU Today Tue 19 Wed 20 Thurs 21 Fri 22 Sat 23 Sun 24 Mon 18 6 15 27 C 002 ABCTV Sydney Play School 15 30 15 55 15 30 16 30 Qo ABC TV Syd 002 Play School DTV 020 AB 021 People Dimensio EPG E BEES e 2 Press lt p R G to select the time span you want to search Continue to press to display programmes in the next time span 3 Press to select the desired programme gl Close the EPG screen Press EPG again or MENU to exit For New Zealand delivery model the EPG screen and operation differ due to the use of MHEG EPG The EPG screen and operation vary depending on the broadcasts You can schedule a reminder for future programmes Channel will automatically change on time as scheduled Press EPG Press V R G to select the programme you want to watch Press B to set reminder time Reminder Programm
13. It is possible to output audio through the DIGITAL connecting to a PC AUDIO OUTPUT terminal PCM audio outputs from the terminal ANALOG RGB IVF Rl EM Optical fibre cable commercially available ANALOGUE RGB PC PC I To optical digital input of external audio devices The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers The audio of the content you are viewing is output from the terminal The DIGITAL AUDIO OUTPUT terminal does not output some signals depending on devices and software 4 Remote control unit 11 INFO DTV mode Display the programme information See page 17 12 RADIO Press to access RADIO mode See page 18 13 POWER STANDBY ON To switch the power on and off See page 7 14 DISPLAY Display the channel or input information 15 SLEEP Set the Sleep timer 0 hr 30 min 1 hr 00 min 1 hr 30 min Off lt 2hr 30 min lt 2 hr 00 min 16 AV MODE Select an audio and video setting See page 10 17 MPX Select the sound multiplex mode 18 TV VIDEO INPUT SOURCE Select an input source 19 CHA CHY TV input mode Select the channel CH A Increase the channel number CH V Decrease the channel number TELETEXT mode Select the page See page 22 4 20 PC 1 gt Mute T
14. SHARP MODEL LC 22LE520X LCD COLOUR TELEVISION OPERATION MANUAL HOM aE I IDOLBY DIGITAL Supplied accessories Remote control unit Operation manual Stand unit AA size battery x 1 lt gt AC cord Stand base Contents Page Page Supplied accessories 1 ECO menui tieie rene 12 Dear SHARP customer 2 Setup menu LIU us 12 Important Safety Precautions 2 Option menu 14 Important information 2 Digital setup menu 16 Trademarks nene eie 2 Programme Guide 17 Attaching the stand 3 InfQ a M 17 Setting the TV J ences 3 ATV Analogue DTV RADIO buttons 18 Connecting external devices 4 Switching the analogue audio format 18 Remote control unit 5 dc 20 Parti ames U u uuu 6 Picture and still image 21 Turning the TV on olf
15. T 7 PC terminals 17 Headphone jack 9 Antenna input terminal The INPUT 1 and INPUT 7 terminals can both use the same analogue audio input terminal However the proper item must be selected in the PC audio select menu See page 14 Usually do not connect anything to this terminal as it is reserved only for service personnel The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations Regarding the headphone jack Use headphones with a stereo mini plug 3 5 mm Be sure to unplug headphones from the jack when they are not in use Volume display when headphones are plugged in he speakers do not output volume when headphones are plugged in The Audio menu cannot be operated when headphones are plugged in Turning the TV on off Turning on off the power To turn on the power Press POWER on the TV After a few seconds an image appears with sound To turn off the power Switch it off by pressing POWER on the TV Standby mode To standby mode If the TV is switched on you can switch it to standby by pressing POWER on the remote control Switching on from standby From standby press POWER on the remote control f you are not going to use this TV for a long period of time be sure to remove the AC cord from the AC outlet Minor power is consumed when the unit is in standby mode Supplying electric power to the antenna Whe
16. Teletext image to Top Bottom or Full To reveal hidden information such as an answer to a quiz Reveal hidden TELETEXT Hold To stop updating Teletext pages automatically or release the hold mode When a programme is set the TV can be controlled from the PC using the RS 232C terminal The input signal PC video can be selected the volume can be adjusted and various other adjustments and settings can be made enabling automatic programmed playing e Attach an RS 232C cable cross type commercially available to the Din D sub RS 232C for the connections This operation system should be used by a person who is accustomed to using PCs Communication conditions Set the RS 232C communications settings on the PC to match the communications conditions of the TV The communications settings of the TV are as follows Baud rate 9 600 bps Data length 8 bits Parity bit None Stop bit 1 bit Flow control None Communication procedure Send the control commands from the PC via the RS 232C connector The TV operates according to the received command and sends a response message to the PC Do not send multiple commands at the same time Wait until the PC receives the OK response before sending the next command Command format Eight ASCII codes CR C1 C2 C3 C4 P4 P2 P3 P4 1 T Command 4 digits Parameter 4 digits Return code Comma
17. V VIDEO on the TV To protect all equipment always turn off the TV before connecting to a VCR game console camcorder DVD player Digital TV STB Set Top Box PC or other external equipment Refer to the relevant operation manual VCR DVD player etc carefully before making connections Connecting a VCR game console or camcorder A VCR game console camcorder and some other audiovisual equipment can be conveniently connected using the INPUT 4 INPUT 5 or INPUT 6 terminals When using component cable When using composite cable or S VIDEO cable commercially available commercially available Lol INPUT 4 P r AUDIO a 9 or L vipEo VCR Game console Camcorder VoH Gama consola Oamcordar Connecting a DVD player Digital TV STB Set Top Box You can use the INPUT 1 INPUT 2 INPUT 3 HDMI or INPUT 6 terminals when connecting to a DVD player Digital TV STB Set Top Box and other audiovisual equipment When using HDMI certified cable When using component cable commercially available commercially available INPUT 6 P Pa C Y Pa _ Ce 63 C amp AUDI x 6 RENE DVD player Digital TV STB Set Top Box 5 DVD player Digital TV STB Set Top Box Connecting a PC Using Digital Audio Output You can use the INPUT 7 PC terminals when
18. VED SERVICE CENTRE VISIT OUR WEBSITE AT www sharp net nz CONTACT YOUR SELLING DEALER RETAILER OR CALL SHARP CUSTOMER SERVICES TELEPHONE 09 573 0111 FACSIMILE 09 573 0113 SHARP CORPORATION OF NEW ZEALAND LIMITED SPform019 JUNE 2004 SHARP WARRANTY Consumer Electronic Products Congratulations on Your Purchase This Sharp product is warranted against faults in materials and manufacture for a period of twelve 12 months from the date of original purchase If service is required during the warranty period please contact your nearest Sharp Approved Service Centre These repairs would be carried out at no charge to the owner subject to the conditions specified herein The owner is responsible for any transportation and insurance costs if the product has to be returned for repair This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product including but not limited to defect or injury caused by or resulting from misuse abuse neglect accidental damage improper voltage liquid spillage vermin infestation software or any alterations made to the product which are not authorised by Sharp Please retain your sales documentation as this should be produced to validate a warranty claim This warranty is in addition to and in no way limits varies or excludes any express and implied rights and remedies unde
19. an the product Do not use liquid cleaners aerosol cleaners or chemical cloth to clean it as such materials may damage the product e Water and moisture Do not use the product near water such as bathtub washbasin kitchen sink laundry tub swimming pool and in a wet basement Do not place vases or any other water filled containers on this product The water may spill onto the product causing fire or electric shock e Stand Do not place the product on an unstable cart stand tripod or table Doing so can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer When relocating the product placed on a cart it must be moved with utmost care Sudden stops excessive force and uneven floor surface can cause the product to fall from the cart Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not
20. anel 22 547 mm TFT LCD Resolution 2 078 600 pixels 1920 x 1080 Video Col our System PAL SECAM NTSC 3 58 NTSC 4 43 PAL 60 TV Function TV Standard Analogue PAL B G D K SECAM B G D K K K Digital DVB T Receiving Channel VHF UHF 44 25 863 25 MHz CATV TV Tuning System S1 S41ch including Hyperband Auto Preset 99 ch STEREO BILI NGUAL NICAM B G D amp A2 stereo B G Viewing a ngles H 170 V 160 Audio am plifier 3W x 2 Speakers 8 x 2 5cm 2pcs Terminals Anten na input UHF VHF 75 Q DIN type NPUI 1 HDMI HDMI input 4801 5761 480P 576P 720P 50Hz 720P 60Hz 10801 50Hz 10801 60Hz 1080P 24Hz 1080P 50Hz 1080P 60Hz AUDIO in 3 5 mm jack NPUI 2 HDMI HDMI input 4801 5761 480P 576P 720P 50Hz 720P 60Hz 10801 50Hz 10801 60Hz 1080P 50Hz 1080P 60Hz 1080P 24Hz NPUI 3 HDMI HDMI input 4801 5761 480P 576P 720P 50Hz 720P 60Hz 10801 50Hz 10801 60Hz 1080P 50Hz 1080P 60Hz 1080P 24Hz NPUI T4 S VIDEO in VIDEO in AUDIO in 5 VIDEO in AUDIO in NPUI 6 AUDIO in CO 10801 S0Hz 1 PONENT in 0801 60Hz 4801 9 61 480P 576P 720P 50Hz 720P 60Hz NPUI 7 PC input 15 pin mini D sub AUDIO in common use with INPUT 1 3 5 mm jack RS 232C Digital Audio Output Hea
21. area of magnification DTV mode To display EPG Electronic Programme Guide See page 22 screen See pages 20 to 21 25 DTV 10 GUIDE Press to access DTV mode See page 18 DTV mode Display the programme list See page 17 26 ATV Press to access ATV mode See page 18 Inserting the battery Before using the TV for the first time insert a AA size battery supplied When the battery become depleted and the remote control fails to operate replace the battery with new AA size battery 1 Open the battery cover 2 Insert the supplied AA size battery 3 Close the battery cover Place battery with their terminals corresponding to the 4 and indications in the battery compartment e Battery battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like Part names TV Front OPC Remote control sensor POWER indicator Light of Lighted Red The TV is in standby mode Lighted Green The TV is on TV Rear 1 POWER On Off button 10 INPUT 1 HDMI terminal 2 MENU button 11 INPUT 4 terminals 3 TV VIDEO button 12 INPUT 5 terminals 4 Channel up A down V buttons 13 INPUT 6 terminals 5 Volume up down buttons 14 INPUT 2 HDMI terminal 6 RS 232C terminal 15 SERVICE ONLY terminal 7 DIGITAL AUDIO OUTPUT terminal 16 INPUT 3 HDMI terminal 8 INPU
22. be displayed properly depending on the settings and or input signals Input signal e Some input signals may have to be registered manually to display properly The pairs of input signals resolutions in the list below are not distinguishable when received In such case you have to set the correct signal manually After setting once it will display when the same signal resolution is input again 1280 x 768 1360 x 768 Bl version up This function is only for service personnel to use for software updates 15 Digital setup menu Option Digital setup Audio language Subtitle language Hearing impaired Time zone Summer time OAD setup Il Selecting the language Set up to two preferred multi audio languages to display if the audio languages are available Press MENU and the MENU screen displays Press lt gt to select Digital setup Press A W to select Audio language and then press ENTER Press to select 1st Language or 2nd Language and then press ENTER Press A W 4 p to select the desired language and then press ENTER NOTE e If audio for the selected languages is not included in a received broadcast audio will not be output for that language II Displaying subtitles for the hearing impaired You can display subtitles for the hearing impaired in the Teletext broadcast if the subtitle languages are available Press MENU and the MENU screen displays Pres
23. d lock has been activated is displayed Press ENTER to display the password input window Clearing the password Allow you to clear your password Repeat steps 1 to 3 in Setting a password Press to select Clear password and then press ENTER Press lt p to select Yes and then press ENTER Setup menu Continued Parental rating This function allows TV channels to be restricted It prevents children from watching violent or sexual scenes that may be considered inappropriate Repeat steps 1 to 3 in Setting a password Press A W to select Parental rating and then press ENTER Press A W to select your desired rating and then press ENTER When the country setting is set to Australia Selected item Description General and above G Content is not offensive to most viewers Parental guidance and above PG Content is such that parents may not want their children to view the programme Mature and above M Mature audience only This programme is Specifically designed to be viewed by adults and therefore may be unsuitable for children under 15 Mature adult and above MA Mature adult only Mature audience only This programme is specifically designed to be viewed by adults and therefore may be unsuitable for children under 15 Adult violence and above AV Not for children under age 15 Strong elements of sex and or violence Restricted and above
24. dphone 9 pin D sub male connector Optical Digital Audio Output 3 5 mm stereo English AC 110 240 V 50 60 Hz 33 W 0 6 W Standby 536 W x 342 H x 62 5 D mm 536 W x 373 H x 170 D mm 4 4 kg 4 8 kg 0 C 40 C As a part of policy of continuous improvement SHARP reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated are nominal values of production units There may be some deviations from these values in individual units OSD language Power Requirement Power Consumption without stand with stand without stand with stand Operating Temperature Dimensions Weight Optional accessory Additional optional accessories may be available in the near future When purchasing please read the newest catalogue for compatibility and check the availability e This TV should be mounted on the wall only with the AN 26AG1 SHARP wall mount bracket The use of other wall mount brackets may result in an unstable installation and may cause serious injuries e Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves SHARP bears no responsibility for improper mounting or mounting that results in accident or injury e Carefully read the instructions that c
25. e f Lock is set to On for a channel Child lock has been activated is displayed when you select the channel and the image and sound of the channel is blocked When pressing ENTER while Child lock has been activated is displayed password input menu will be displayed Inputting the correct password lifts the child lock temporarily until the power is turned off 9 Programme setup Continued Bl Sort Analogue Channel position can be sorted freely Repeat steps 1 to 4 in Auto search Press A W to select Sort and then press ENTER Press lt p to select Yes and then press ENTER Press A W to select the channel you want to move and then press ENTER Move it to the desired position by pressing A W 4 9 and then press ENTER Repeat the steps 4 and 5 until all desired channels are sorted ll Erase programme Analogue The individual programme can be erased Repeat steps 1 to 4 in Auto search Press to select Erase programme and then press ENTER Press lt p to select Yes and then press ENTER Press A W to select the channel you want to erase and then press ENTER Press ENTER to erase the channel Repeat the step 4 and 5 until all desired channels are erased 10 Selecting a preset AV mode AV mode gives you several viewing options to choose from to best match the system environment which can vary due to factors like room brightness typ
26. e 002 ABC TV Sydney Hour 15 Minute 05 Mode Once Date Mon 18 Month Jun Press ENTER to save reminder timer e Timer Save Success will display e Timer Overlap will display if same time is set twice e Timer Past will display if past time is set Press ENTER to display the reminder schedule list REMINDER LIST Title Time Date Programme Jazz Festival 18 00 Mon 18 J 002 ABC TV Sydney Press MENU or EPG to exit 20 EPG Continued Wide Mode Viewing the reminder schedule list Press EPG Press Y to display the reminder schedule list Press A W to display next or previous screen Press MENU or EPG to exit Cancelling the reminder timer setting Press EPG Press Y to display the reminder schedule list Press A W to select a programme you want to cancel Press R to delete a programme from reminder list Press MENU or EPG to exit Picture and still image You can freeze a motion picture on the Display Press FREEZE e A still image displays Press FREEZE or RETURN again to exit still image e The still image automatically goes out after 30 minutes e FREEZE doesn t function for PC input all resolution Auto Selection If you set WSS and 4 3 mode in the Setup menu the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information WSS menu To enable Auto Selection set WSS in the Setup menu to On See page 13
27. e of programme watched or the type of image input from external equipment QU Press AV MODE Each time you press AV MODE the mode changes You can also switch the mode in the AV mode menu on the Picture menu screen Selected item STANDARD Description For a highly defined image in a normally bright room For a movie For game play For PC Available only when inputting an HDMI or PC signal Allows the user to customise settings as desired You can set the mode for each input source Changes the image and sound settings to the factory preset values No adjustments are allowed For a clear cut image emphasising high contrast for sports viewing DYNAMIC FIXED DYNAMIC You can select a different AV mode item for each input mode For example select STANDARD for TV input and DYNAMIC for VIDEO input e During PC input mode only STANDARD PC and USER can be selected under the AV mode selection Menu operation Press MENU and the MENU screen displays Press lt q p to select the desired menu Picture Audio ECO Setup Option Digital setup Press to select the desired menu item Press ENTER to proceed if necessary Press A V or lt p to select the desired item or adjust the item to the desired level Press ENTER if necessary Audio AV mode STANDARD OPC ort Backlight 1616 Ka Contrast 30 O O 40 Colour Ee Ti
28. ft or right Centres the image by moving it up or down Reset position to factory preset values V Position Reset Bl HDMI auto view HDMI input mode only Selected item Enable Description Set whether or not to use WIDE MODE based on signal recognition including an HDMI signal Disable B wss WSS allows a television to switch automatically among the different screen formats On Off Try to set WIDE mode if an image does not switch to the correct screen format When the broadcast signal contains no WSS information the function will not work even if enabled Not available for COMPONENT PC and HDMI signal Bl 4 3 mode The WSS signal has 4 3 auto switching that allows you to select between Panorama and Normal Selected item Panorama Normal Description Wide image without side bars Normal range keeping 4 3 or 16 9 aspect ratio WSS signal 4 3 screen 4 3 mode Normal Bl Quick start You can reduce the TV s start up time after turning on the power with the remote control unit Selected item Description On The TV quickly starts up from standby 8 5W or more of power consumption is required during standby Off Power consumption is less than 1W B Text language Select from among 3 kinds of language West Europe Arabic Farsi Teletext can display only when it is sent by a network Not used to convert between languages Bl Identification Y
29. he volume levels On Off Bl Digital audio output This function allows you to select your favourite audio output system Selected item Dolby Digital Description Dolby Digital audio will be output when there is a Dolby Digital audio signal The output will be in PCM when there is no Dolby Digital audio signal The optical output format is normally in POM Option menu Continued Bl Audio only When listening to music from a music programme you can set the display off and enjoy audio only Selected item Description Adjusting the PC image manually Ordinarily you can easily adjust the picture as necessary to change image position using Auto sync In some cases however manual adjustment is needed to optimise the image Selected item Description Audio is output without screen image Both screen images and audio are output B e When you make operations that change the picture on the TV such as by changing the input source the Audio only function is set to Off Bl Game play time This function displays the elapsed game time so you do not lose track of the time To display the elapsed time select GAME under AV mode for the input mode of the terminal connected to the game console before starting the game Selected item Description The elapsed time is displayed every 30 minutes when you switch to GAME mode in external input mode Hides the time
30. ill picture for a long time as this could cause an afterimage to remain e Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT terminal on the rear of the product f a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as Using cabinets or stands recommended by the manufacturer of the television Only using furniture that can safely support the television Ensuring the television is not overhanging the edge of the supporting furniture Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and the television to a suitable support Not standing the televisions on cloth or other materials placed between the television and supporting furniture Educating children about the dangers of climbing on furniture to reach the television or its controls Important information This product qualifies for ENERGY STAR when Home is selected for TV location Setting TV Location to Home allows the TV to achieve an energy saving status for household use Trademarks e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC e Manufactured under license from Dolby Laboratories Dolby and
31. iving a 720p signal Display with the High Definition image adjusted optimally Noise may appear on the edge of the screen with some programmes Cinema14 9 Dot by Dot Underscan e Some picture size may not be displayable depending on the input signal 6 21 PC Control of the TV What is Teletext Teletext broadcasts pages of information and entertainment to specially equipped television sets News weather reports sports information stock exchange prices and programme previews are among the many services available Turning on and off Teletext Select a TV channel or external input source providing the Teletext programme 2 Press amp to display the Teletext Each time you press the screen switches as shown below f you select a programme with no Teletext signal No teletext available is displayed The same message displays during other modes if no Teletext signal is available New Zealand delivery model can receive MHEG data broadcasting Button functions Buttons Description CH N V Increase or decrease the page number Colour Red Green Yellow Blue You can select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour Red Green Yellow Blue on the remote control unit 0 9 Directly select any page from 100 to 899 by using 0 9 Top Bottom Full Switch the
32. ly adjusts the contrast of an image according to the scene On Off 3D Y C Provides high quality images with minimal dot crawl and cross colour noise On Off e 3D Y C is not selectable depending on the input signal type e 3D Y C may not operate depending on the input signal type or noisy input signal Monochrome For viewing images in monochrome On Off DNR Digital Noise Reduction Reduces noise on screen and produces a clearer video image Off High Low Auto e For resetting all Picture adjustment items to factory preset values press to select Reset press ENTER press lt p gt to select Yes and then press ENTER Audio nu STANDARD Treble 0 15 E 15 URBE ig ary Balance O L a R Surround Off Bass Reset Bl Audio adjustments Selected item lt button Treble Bass Balance gt button For weaker treble For stronger treble For weaker bass For stronger bass Decrease audio from Decrease audio the right speaker from the left speaker Bl Surround When you set to On you can enjoy surround sound the same as if you were in a movie theatre Selected item Description Makes it possible to enjoy natural realistic surround sound Outputs the normal sound For resetting all Audio adjustment items to the factory preset values press A W to select Reset press ENTER press lt gt to select Yes and then press ENTER ECO
33. n you set up the DTV antenna for the first time or connect the antenna to a community antenna you need to proceed to set the antenna by following this manual INFO RADIO ATV Press DTV to access DTV mode Press MENU and the MENU screen displays Press lt gt to select Setup Press A to select Digital Programme Setup and then press ENTER Press A W to select Antenna power and then press ENTER Press lt gt to select Yes and then press ENTER Selected item Description Yes Select Yes when your antenna is set up and connected independently No Select No when you do not need to supply voltage to your antenna i e when your antenna is connected to a community antenna The factory default setting of this function is No Initial auto installation When the TV powers on for the first time after purchase the initial auto installation wizard appears Follow the menus and make the necessary settings one after another Press POWER on the TV The initial auto installation wizard appears Press lt p to select HOME or STORE and then press ENTER Press lt gt to select your country channels listed on the screen and then press ENTER Press to select DTV ATV or ATV DTV and then press ENTER Press to select the desired sound System and then press ENTER e Sound system is selectable when the signal sea
34. nd 4 digits Command The text of four characters Parameter 4 digits Parameter 0 9 space Parameter Input the parameter values aligning left and fill with space s for the remainder Be sure that four values are input for the parameter When the input parameter is not correct ERR returns Refer to Response code format 0 0 01019 9 0 lt Subtitle Display the subtitle during Teletext page for TELETEXT e Subtitle will not be displayed when the service does not contain subtitle information Subpage Display the subpage during Teletext page Teletext can display only when it is sent by network Not used to convert between languages 22 Response code format Normal response O K Return code ODH Problem response communication error or incorrect command E RIR e Return code 0DH PC compatibility chart Resolution Horizontal Frequency Vertical Frequency VESA Standard Analogue D Sub Digital HDMI VGA 720 x 400 31 5 kHz 70 Hz v 640 x 480 31 5 kHz 60Hz SVGA 800 x 600 37 9 kHz 60Hz XGA 48 4 kHz 47 7 KHz 1024 x 768 1360 x 768 60Hz 1280 x 1024 64 0 kHz 1400 x 1050 65 3 kHz DDC is a registered trademark of Video Electron ics Standards Association Power Management is a registered t
35. ngth and Signal quality indicate when to check the appropriate alignment of the antenna Auto installation You can run auto installation again even after setting up the preset channels Press MENU and the MENU screen displays Press lt q p to select Setup Press A W to select Auto installation and then press ENTER If you have already set the password enter it here See page 12 for setting a password Press lt q p to select Yes and then press ENTER Press to select DTV ATV or ATV DTV and then press ENTER Press A W to select the desired sound System and then press ENTER Sound system is selectable when the signal search is set to ATV or ATV DTV mode only You do not need to do anything during the auto search Press MENU to exit Programme setup Digital settings d You can reconfigure DTV services settings automatically or manually wW Press MENU and the MENU screen displays Press lt p gt to select Setup Press to select Digital Programme Setup and then press ENTER If you have already set the password enter it here e See page 12 for setting a password Press to select the desired menu item and then press ENTER Press lt p to select Yes and then press ENTER Bl Auto search Digital Use this menu to add new services automatically after auto installation ha
36. nt 2 10 10 Brightness Sharpness Advanced Reset ll OPC Optical Picture Control setting You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions Selected item Description On Display Displays the OPC effect on the screen while adjusting the brightness of the screen Automatically adjusts The brightness is fixed at the value set in Backlight Make sure no object obstructs the OPC sensor which could affect its ability to sense surrounding light Bl Picture adjustments lt button The screen dims For less contrast For less brightness gt button The screen brightens For more contrast For more brightness Selected item Backlight Contrast Brightness Colour For more colour intensity Skin tones become greenish For more sharpness For less colour intensity Tint Skin tones become reddish For less sharpness Sharpness Bl Advanced Colour temp Colour Temperature Adjusts the colour temperature to give the best white image Selected item White with bluish tone t White with reddish tone Film mode Automatically detects a film based source originally encoded at 24 25 frames second depending on the vertical frequency analyses it then recreates each still film frame for high definition picture quality On Off Active contrast Automatical
37. ome with the bracket before beginning work Part name Model number AN 26AG1 Wall mount bracket 25 Dimensional drawings Unit mm 536 4 4 246 e ae a g 02 2 N y l 100 T S 5 2 ol y er To cof 20 m vO 9 9 a amp 26 CLEARING THE PASSWORD If you forget the password clear the password using the following procedure Press MENU to display the MENU screen and then press lt gt to select Setup Press to select Child lock and then press ENTER and the password input screen display If you enter 80017 using 0 9 the Child lock setting menu will be displayed Enter the 4 digit number as a password using 0 9 The new password is now set The Password is As a precautionary measure make a note of your password above remove it from this manual and keep it in a familiar place 27 SHARP FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www sharp net au OR CALL SHARP CUSTOMER CARE 1300 135 022 LOCAL CALL COST APPLY WITHIN AUSTRALIA SHARP CORPORATION OF AUSTRALIA PTY LTD SHARP FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPRO
38. ou can check the current version of the software on the Screen Bl Reset If complex adjustments are made and the settings cannot be restored to normal you can reset the settings to the factory preset values e f you execute Reset all the settings such as Picture Audio and Programme will be reset to the factory preset values 14 a Option Input select PC audio select Auto volume Digital audio output Audio only Version up Bl input select For setting the signal type of external equipment Selectable item Auto S VIDEO VIDEO Input source INPUT4 lll PC audio select When using the INPUT7 terminal or HDMI1 terminal you must select which terminal uses the AUDIO R L jack for analogue audio input Selected item HDMI1 Description When connecting devices including a PC with DVI HDMI cable to the INPUT1 terminal and inputting analogue audio signals from the AUDIO R L jack When connecting a PC to the INPUT7 terminal and inputting analogue audio signals from the AUDIO R L jack INPUT7 RGB e You must set this to INPUT7 RGB when connecting devices including a PC with an HDMI certified cable to the INPUT 1 terminal If HDMI1 is set there will be no sound output Bl Auto volume Different sound sources fairly often do not have the same volume level for example the changing from movie to the advertisements Auto volume solves this problem and equalises t
39. p This function is for automatically download the data for the version update software over digital broadcasts when the OAD setup is set to On e To download follow the instructions when the download message appears during a digital broadcast Do not disconnect the AC cord when the software upgrade is in progress as this may cause the upgrade to fail If problem arises ask a qualified service personnel before the software upgrade period expires Programme Guide You can check the current schedule of DTV events and view detailed information about current events INFO RADIO ATV DTV Press GUIDE to display the programme guide list Press A W to display your desired programme and then press ENTER When you press ENTER the TV jumps to the channel Channel list Mon 18 6 2007 15 30 020 ABC HDTV 13 23 18 30 Dorothy The Dinosaur 002 ABC TV Sydney Dorothy The Dinosaur 021 ABC2 Gardening Australia 022 ABC TV Dorothy The Dinosaur Select channel CID Enter GED Back CHD Exit lt Page up down R Program information Press R to view programme information Press RETURN or MENU to exit INFO RADIO ATV OO While watching DTV you can check the extended programme information on the screen using INFO on the remote control General INFO screen Station name Title 8 Date Time for the current programme 6 Video sy
40. r any relevant legislation in the country of sale IMPORTANT DO NOT RETURN THIS DOCUMENT TO SHARP For your reference please enter the particulars of your purchase below and retain with your purchase documentation Model No Serial No Date of Purchase Retailer IMPORTANT NOTICE This warranty applies only to products sold in Australia amp New Zealand SHARP SHARP CORPORATION Printed in Malaysia TINS E996WJZZ 10P12 MA NP
41. rademark of Sun Microsystems Inc VGA and XGA are registered trademarks of International Business Machines Corp RS 232C commands list v v v v v v v v v v v v Commands e Commands not indicated here are not guaranteed to operate CONTROL CONTROL CONTROL ITEM COMMAND PARAMETER CONTENTS CONTROL ITEM COMMAND PARAMETER CONTENTS POWER SETTING P OIW R O _ POWER OFF STANDBY VOLUME V O LIM _ _ VOLUME 0 60 INPUT SELECTION A I T G D INPUT SWITCHING TOGGLE POSITION H P O s _ H POSITION AV 10 010 _ _ 2 _ ATV CHANNEL FIXED 8 _ H POSITION PO 000 180 I DITI V DTV CHANNEL FIXED v P o s _ V POSITION AV 20 020 I A V D _ INPUT1 7 1 7 V P O S V POSITION PO 000 120 CHANNEL D C C H ATV DIRECT CHANNEL 1 99 cC L C K _ CLOCK 000 180 C H JUJP ATVCHANNEL UP P H S E PHASE 000 015 C HIDIW ATVCHANNEL DOWN WIDE MODE W I D E O TOGGLE AV DIT V D DTVDIRECT CHANNEL 1 999 W I D E 1 NORMAL AV D TIU P DIVCHANNEL UP W I D E 2 ZOOM 14 9 AV D T DIW DTV CHANNEL DOWN W I D E 3 PANORAMA AV
42. rch is set to ATV or ATV DTV mode only Auto installation will be executed You do not need to do anything during the auto search HOME STANDARD will be the default value for the AV mode setting STORE DYNAMIC FIXED will be the default value for the AV mode setting If the AV mode is changed the TV will automatically switch back to DYNAMIC FIXED when there is no further change to TV setting for 30 minutes To change the STORE mode to HOME mode please refer to page 14 to reset the unit Checking Signal information If you install a DVB T antenna for the first time or relocate it you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen iJ Press MENU and the MENU screen displays Press lt q p to select Setup Press A F to select Digital Programme Setup and then press ENTER 7 Checking Signal information Continued Bl Checking Signal information Press A W to select Signal information Auto search Manual search us susu Channel number 68 Signal information Signal strength I KIIIIIIIIIIIMIIIIIIIIIIAII Current IR Maximum 100 Signal quality II II IIII IOI IIIIIIIIIIIIII e o5 Antenna power Position and align the antenna so that the maximum possible values for Signal strength and Signal quality are obtained The values of Signal stre
43. res below To watch DTV broadcasts select DTV from auto installation menu See page 8 After setting the channels you can select a channel using CH A Y or 0 9 on the remote control unit See page 5 Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme AV MODE MPX In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX the mode switches between NICAM STEREO and MONO Stereo mode PAL NICAM B G STEREO When receiving a bilingual signal Each time you press MPX the mode switches among NICAM CH A NICAM CH B NICAM CH AB and MONO Bilingual mode PAL NICAM PAL NICAM B G CHAB When receiving a monaural signal Each time you press MPX the mode switches between NICAM MONO and MONO Monaural mode Switching the analogue audio format Continued In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX the mode switches between STEREO and MONO Stereo mode When receiving a bilingual signal Each time you press MPX the mode switches among CH A CH B and CH AB Bilingual mode When receiving a monaural signal When you press MPX MONO displays Monaural mode BBC1 01 and PAL are tentative network name channel and colour system 1
44. s lt gt to select Digital setup Press A W to select Subtitle language and then press ENTER Press A Y to select 1st Language or 2nd Language and then press ENTER Press A W 4 p to select the desired language and then press ENTER S NOTE f subtitles for the selected language are not included in a received broadcast subtitles will not be shown for that language lg Switching subtitle languages DVB Subtitle Each time you press 3 on the remote control the subtitle switches when the broadcast contains subtitle information Set Hearing impaired to On Hearing impaired ist Language Off ss Set Hearing impaired to Off 2nd Language M 1st Language 2nd Language Off lt Hearing impaired This function is valid only if broadcaster is transmitting multilingual subtittles Hi Time zone This function enables you to select your local time zone uj Press MENU and the MENU screen displays 32 Press to select Digital setup Press A W to select Time zone and then press ENTER Press lt q p to select the desired time zone and then press ENTER This function lets you select the right time zone in case the time displayed in the EPG does not match the local time of your area Hi Summer time When the Summer time is set to On the Standard Time is plus one hour Auto On Off ll OAD setu
45. s been completed lll Manual search Digital Add new services within a specified frequency band Press lt p to select the frequency and then press ENTER Bl Manual adjust Digital Configure various settings for each service using the Colour R G B buttons MENU Setup Digital Programme Setup Select a service and then press the colour button to change service settings Maori Television 022 Parliament TV 100 Freeview HD Service Name Maori Television Kim Lock o CH skip 5 Sort Select D Enter MD Back MENU End ae Press to select desired service Press the Colour button on the remote control corresponding with the item you want to reconfigure Each time the Colour button is pressed you can switch the corresponding operation on off Buttons for Manual adjust operation Remote control buttons R When the service is locked you must enter your password whenever you Description tune to the service Services with Skip are passed over when pressing A V in the TV remote control unit The item position of services can be sorted Programme setup Continued The item position of services can be sorted D Press A W to select the service whose item position you want to move and then press B DTV 005 Maori Television DTV 022 Parliament TV DTV 100 Freeview HD Press A V to move it to the desired position and then press ENTER DTV 100 Free
46. stem 6 Audio system Dolby Digital or MPEG 7 Parental rating f there is more information pressing A W allows you to go to the next page or return to the previous page You can cancel this info by pressing INFO or EXIT 17 ATV Analogue DTV RADIO buttons Use the following buttons on the remote control to operate the menu INFO RADIO ATV Press to switch to ATV mode After switching from DTV radio or external input mode to ATV mode the TV jumps to the most recently viewed ATV channel DTV Press to switch to DTV mode After switching from ATV radio or external input mode to DTV mode the TV jumps to the most recently viewed DTV channel RADIO Press to switch to radio mode After switching from DTV ATV or external input mode to radio mode the TV jumps to the most recently tuned radio channel When you watch the TV for the first time When the TV powers on for the first time after purchase perform the auto installation ATV Analogue TV You can run the auto installation to set channels automatically To watch the analogue TV select Auto installation from Setup menu See page 8 After setting the channels you can select a channel using CH A W or 0 9 on the remote control unit See page 5 18 DTV When the TV accesses to DTV mode for the first time you need to run the auto search To scan all available services in your area follow the procedu
47. uency to your desired position Adjust while checking the background picture as a reference e Instead of pressing lt p gt to adjust the frequency you can Set by directly entering the frequency number of the channel with 0 9 EXAMPLE e 179 25 MHz Press157 5 95 2 5 e 49 25 MHz Press 4 gt 9 2 5 ENTER Colour system Select the optimum colour system to receive Auto PAL SECAM NTSC 4 43 PAL 60 Sound system Broadcasting system Select the optimum sound system Broadcasting system to receive B G D K I Label To enter the name of the channel Maximum 5 alphanumeric can be input e Press A W lt gt To select a desired alphanumeric and then press ENTER Repeat until the name is fully spelt out Search Broadcasting station name settings ABCDEFGHIJ CLEAR Fine Colour system Auto Sound system B G KLMNOPQRST BACK UVWXYZ _ 0123456789 END To exit select END and then press ENTER e If the wrong alphanumeric is entered select CLEAR to clear and then press ENTER Booster Enhance the picture quality during weak signal It is not recommended to turn on during strong signal condition It may induced unwanted noise On Off Skip Channels with Skip set to On are passed over when using CH A M even if selected while watching the image from the TV Lock You can block the viewing of any channel e See Child lock for setting a password
48. view HD DTV 022 Parliament TV DTV 005 Maori Television 8 Repeat steps 1 and 2 until all desired service items are sorted Analogue settings Wl Auto search Analogue You can also automatically search by performing the procedure below This is the same function as programme auto search in auto installation Press MENU and the MENU screen displays Press lt gt to select Setup Press A W to select Analogue programme setup and then press ENTER If you have already set the password enter it here e See page 12 for setting a password Press A W to select Auto search and then press ENTER Press lt gt to select Yes and then press ENTER Press A W to select the desired sound System and then press ENTER You do not need to do anything during the auto search Press MENU to exit Bl Manual adjust Analogue You can set some channel item manually Repeat steps 1 to 4 in Auto search Press A W to select Manual adjust and then press ENTER Press lt p to select Yes and then press ENTER Press A W 4 9 to select the channel you want to edit and then press ENTER The selected channel information displays Press A W to select the desired menu and then press ENTER Press A V or lt p to select the desired item or adjust the item to the desired level Press ENTER if necessary Search The next channel will be search in order Fine You can adjust the freq
49. w are not always caused by malfunctions Check the TV again before having the TV serviced Problem Possible Solution No power Check if you pressed POWER on the remote control unit See page 7 If the indicator on the TV lights up red press POWER e Is the AC cord disconnected Has the power been turned on See page 7 Unit cannot be operated Remote control unit does not operate External influences such as lightning static electricity etc may cause improper operation In this case operate the unit after first turning the power off the TV or unplugging the AC cord and re plugging it in after 1 or 2 minutes s battery inserted with polarity aligned See page 5 S battery worn out Replace with new battery Are you using it under strong or fluorescent lighting s a fluorescent light shining on the remote control sensor Picture is cut off s the image position correct See page 15 Are screen mode adjustments such as picture size made correctly See pages 14 15 and 21 e Strange colour light colour or dark or colour misalignment Adjust the picture tone See page 11 s the room too bright The picture may look dark in a room that is too bright Check the colour system setting See pages 9 and 15 Check the input signal setting See page 15 e Check the HDMI auto view setting See page 19 Power is suddenly turned off The unit s
Download Pdf Manuals
Related Search