Saturn 2009 Aura Hybrid Automobile User Manual
Contents
1. E Slip Sheet 1 Key Operator Tools Slip Sheet 2 ff System Settings Slip Sheet 3 Select one ofthe following settings N DisplayPrint Counter Cover Sheet Key Operator Tools Tray Paper Settings Display Print Counter f System Settings J xw e Sect ne ofthe olowngsettigs Tray 4 Paper Type ony Tray 8 Paper Type Plain Slip Sheet 2 None 00000000 C mome ZAJXO10N User Tools System Settings Settings You can Change with the User Tools BP Reference Regarding how to access the user tools see P 5 Accessing User Tools Sys tem Settings General Features Menu Description Function Priority You can specify the mode that is displayed when the opera tion switch is turned on or System Reset is activated P Note O Default Copier Reference See System Reset P 10 General Features Panel Tone A tone sounds when a key is pressed You can turn the tone on or off You can also select the volume level from Low Medium and High Note O Default On volume Medium Ready Panel Tone You can specify whether to sound the tone when the ma chine becomes ready for copying after Energy Saver mode is deactivated or the power is turned on Note O When the Panel Tone is set to OFF the tone does not sound even if the Ready Panel Tone is2. Note O Default None 18 User Tools System Settings Menu Description Tray1 Paper Type Tray2 Paper Type Tray3 Paper Type Tray4 Paper Type Tray5 Paper Type Tray6 Paper Type 3 Slip Sheet Copy In Duplex Mode e You can specify Duplex Copy or 1 Sided Copy in the specified for slip sheets tray However if Translucent Pa per OHP Sheet Thick Paper or Tab Stockis specified you cannot Duplex Copy 2 Note O Default Duplex 4 Paper Size e If the specified paper size differs from the size of paper actually set in the paper tray a paper misfeed might oc cur because the paper size is not detected correctly Note O Default e Metric version Height 148 297mm Width 210 432mm e Inch version Height 5 9 11 8 Width 8 3 17 0 e If you wish to change the paper size sent in Tray 1 Tray 6 Large Capacity Tray please contact your ser vice representative e If you wish to set custom size copy paper in Tray 2 and Tray 3 please contact your service representative e Concerning the Tray 2 and Tray 3 the machine will select the specified paper size O Default e Metric version A4 D e Inch version 81 2 x11 D Slip Sheet 1 Slip Sheet 2 Slip Sheet 3 Cover Sheet Separation Sheet You can specify any tray as a Slip Sheet 1 2 3 Cover Sheet or Separation Sheet Note O Default None Settings You can Change with the User Tools Key Operator T
3. Copy Speed 85 copies minute A4L 105 copies minute A4D 81 2 x 11 D 81 2 x 11 D Printer Unit Option Option 1 User Tools System Settings Keys for User Tools System Settings EIEE E E eta A l 1 Status indicator e The condition of the machine is distin guished by this indicator By default this indicator is turned off You can specify whether to light the Status In dicator See gt P 10 General Features Color Status Off Main Power Switch is turned off or ready to make copies Flashing green Scanning originals Lit green Copying Ready to scan originals Flashing red Toner has nearly run out Lit red Paper jam or other malfunctions ZAKSO6ON 2 Display panel Shows operation status error messages and function menus 3 Language Selection key Press to select display language English or French 4 Energy Saver key When you press and hold the key the display disappears and the machine en ters Energy Saver mode When you press the key again the machine returns to the Ready condition 5 Clear Modes key Press to clear any previously entered set tings 6 Clear key Press to clear any previously entered numbers User Tools System Settings 7 key Enter key Press to enter a value or confirm a setting 8 Number keys Use to enter the number of copies you wish to make Also us
4. N Pij ay GCAUTO1E 1 Original 2 Copy Paper Tray 1 3 Copy Paper Other Trays Settings You can Change with the User Tools Menu Description Auto Tray Switching e If you select Off When paper has run out Please load paper will be dis played and copying will be interrupted Note O Default On Rotate O If you put recycled paper special paper or translucent paper in paper trays and indicate them in the Tray Paper Settings menu the Auto Tray Switching function is avail able to these trays only when their paper types are iden tical Reference See 4 Paper Size P 17 Tray Paper Settings Copier Document Server Output Tray You can specify to which tray copies are delivered P Note O You can select from the Finisher Shift Tray or Finisher Proof Tray O When using the staple function this setting is ignored Status Indicator The condition of the machine is distinguished by the light called Status Indicator You can specify whether to light the Status Indicator Note O Default Off Language Priority This machine has two language displays You can select the language to be displayed first Note O Default English default Screen Colour Setting You can select the panel display color from four options Blue amp Green Type Blue amp Purple Type Green Type and Gray Type Note O Default Bl
5. ccccccccccsseseeeeeeeeeeeeeeeeeeeeeeeeeeeees 3 Accessing User Tools System SettingS ssssssesssseseseeeeeeeeeeeeees 5 Exiting from User LOGS oisei feasted oe oes ede acted ee led oid 6 User Tools Menu System Settings ccccccccccccsseseeeeseeeeeesesneneeeeeseeeeees 8 Settings You can Change with the User Tools ss ssssssseeeeeeeeeeees 10 General Features a senators e eaten tan tec eaten vecee cor eroet ema rnanmiaen se ak nonaencavorveumnweue teense 10 Timer SettiNg Sirana eye casa tate ae a A e deep k eae ates eee 15 Tray Paper Settings 2eicccs2oces ood hoe Ross osteo tennis eebeti eae aaa oe 17 Key Operator Togs aire ieee inti alee ai a iii 19 PINTO E ett acetates heath ea EEE AT 22 Manuals for this Machine The following two manuals have been prepared for operating this machine this manual describing how to make system settings for copying functions and the Copy Reference manual introducing the operating procedures for copying functions System Settings this manual Describes how to access the system User Tools to make the machine easier to use Copy Reference Describes the various copying functions from basic copying to more ad vanced functions such as reducing enlarging copies or combining originals into one copy Machine Types This machine comes in two models which vary in copy speed To make sure which model you have see the inside front cover Type 1 Type 2
6. will not occur in a particular installation If this equipment does cause harmful interference to radio or television re ception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 1 Properly shielded and grounded cables and connectors must be used for connections to host com puter and or peripheral in order to meet FCC emission limits 2 AC adapter with ferrite core must be used for RF interference suppression This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation SAVIN CORPORATION 333 Ludlow Street Stamford CT 06904 203 967 5000 Note to users in Canada Note This Class B digital apparatus complies with Canadian ICES 003 Remarque concernant les utilisateurs au Canada Ave
7. 2585 8502 25105 10502 Operating Instructions SYSTEM SETTINGS Read this manual carefully before you use this product and keep it handy for future reference For safety please follow the instructions in this manual Note to users in the United States of America Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursu ant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television re ception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s au
8. EQUIPMENT PROBLEMS Notes Some illustrations might be slightly different from your machine Certain options might not be available in some countries For details please contact your local dealer Operator Safety This machine is considered a CDRH class 1 laser device safe for office EDP use The machine con tains a GaAlAs four beam laser diodes array 10 milliwatt 770 810 nanometer wavelength for each emitter Direct or indirect reflected eye contact with the laser beam might cause serious eye damage Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator Laser Safety The Center for Devices and Radiological Health CDRH prohibits the repair of laser based optical unit in the field The optical housing unit can only be repaired in a factory or at a location with the requisite equipment The laser subsystem is replaceable in the field by a qualified Customer Engineer The laser chassis is not repairable in the field Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when replacement or the optical subsystem is re quired Warning Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure The model names of the machines do not appear in the following pages Check the type of your ma chine before reading this man
9. Note O When the weekly timers are set and the operation switch is off you can still use the machine by doing one of the following e If the key operator code is set turn on the operation switch and enter the code e If the key operator code is not set just turn on the op eration switch About weekly timers The weekly timers allow you to restrict the use of the machine to certain times of the day and week The machine will switch itself on and off everyday at the times you specified F Note O When the power is turned off by the activation of the weekly timers you can temporarily cancel the power off state by entering the key operator code up to 8 digits set in Key Operator Code For Off Setting O You can specify On or Off only For example you can make the machine turn on Monday morning and off on Saturday evening O You cannot turn on or off the main power switch by the weekly timers O When On or Off is specified at the same time On becomes effective O While an error indication is lit Off setting is not effective Settings You can Change with the User Tools Tray Paper Settings Menu Description Tray1 Paper Type Tray2 Paper Type Tray3 Paper Type Tray4 Paper Type Tray5 Paper Type Tray6 Paper Type You can specify the types and size of the copy paper set in the paper tray and make them indicated You can set with the following
10. e to enter values for various features 9 Counter key Press to check the total number of copies made 10 User Tools key Press to access the User Tools menu where you can customize the default set tings to your preference Accessing User Tools System Settings Accessing User Tools System Settings This section is for the key operators in charge of this machine With User Tools you can change the machine s default settings E Preparation After using User Tools be sure to exit them to return to Copy mode The key selected is highlighted The settings are not canceled even if the main power switch or operation switch is turned off or the Clear Modes or Energy Saver key is pressed ye Reference For information on Copy User Tools see the Copy Reference manual 1 Press the User Tools key The User Tools Main Menu appears Counter User Tools SSS 4 ZAKSO40N 2 Press the System Settings key The system settings menu appears amp User Tools Main Menu User Tools System Settings 3 Select the desired menu and touch the key f System Settings Select one of the following settings Tray 1 Paper Type ran Tray 3 Paper Type rn ett Tray 4 Paper Type rn 77207 O Slip Sheet 2 rene Separation Sheet ne 0 Change the settings by following the instructions on the panel display Then press the OK key Note O OK Pr
11. ess to store the new settings and return to the previous menu O Cancel Press to return to the previous menu without changing any data Exiting from User Tools 1 After changing the user tools settings press the Exit key on the User Tools Main Menu Changing the system settings ends to return to Copy mode fe System Settings o Select one of the following settings General Features Timer Settings marse Paper Settings Key Operator Tools Tray 1 Paper Type Plain 7 7 Note O To cancel the change of the machine s default settings and return to the copy mode press the User Tools key O You can also exit from User Tools by pressing the User Tools key Counter User Tools ZAKSO40N Accessing User Tools System Settings User Tools System Settings User Tools Menu System Settings User Tools Main Menu General Features f System Settings Select one of the following settings General Features Status Indicator ott Screen Colour Setting Blue amp Green Type Paper Tray Priority Tray5 Timer Settings f System Settings Select one of the following settings Timer Settings User Tools Menu System Settings System Settings Select one ofthe following settings General Features N Tray 2 Paper Type en 7 8D Tray 3 Paper Type Plain Z 82x10 Tray 4 Paper Type Plain N
12. ettings and Key Operator Tools on System Settings and Key Operator Tools Delete All The Saved Files Delete All The Saved Files In CDand Key Operator Access code on Copier Document Server Features e When All Settings is selected The Key Operator Access code will be set for the Sys tem Settings and all the items for the Copier Docu ment Server Features e When All Functions is selected The Key Operator Access code will be set for all the function on this machine You cannot operate the ma chine unless you enter the Key Operator Access code after the machine is turned on Press the OK key F Note O Default Off User Code Display You can specify whether to display user codes entered Note O When Hide is selected e The user code entered will not be displayed but He appears instead O When Display is selected e The user code entered will be displayed with num bers e In Copy Mode user codes are displayed with num bers on the Job List screen Note O Default Hide Settings You can Change with the User Tools Menu Description AOF Keep It On Note O For details contact your service representative Memory Allocation You can select the hard disk memory allocation priority from two options Copier Priority Document Server Priority P Note O Default Copier Priority Display Print Counter You can have vari
13. ools When entering Key Operator Tools if a key operator code has already been set you must enter the code up to 8 digits Menu Description User Codes Copier You can specify whether to control User Codes This setting Document Server is also valid for the copy server PF Note O Default Off P Reference For Registering a User Code see User Tools Copy Fea tures Key Operator Tools of the Copy Reference manual Key Counter Copier You can specify whether to control Key Counter This set Access ting is also valid for the copy server PF Note O Regarding key counter availability and usage please ask your service representative O Default Off P Reference See User Tools Copy Features Key Operator Tools in the Copy Reference manual 20 User Tools System Settings Menu Description Key Operator Access You can specify whether to control the machine by the Key Operator Access code the password to operate the settings of User Tools If you wish to control it you need to register the Key Operator Access code Choose Off or On When you choose On enter the Key Operator Access code up to 8 digits from the Number keys and select Primary Settings or All Settings for the range of re striction e When Primary Settings is selected The Key Operator Access code will be set only for Timer S
14. opy job ends the machine will enter the Panel Off mode ac cording to the Panel Off Timer after the specified time Next it will enter the Energy Saver mode according to the Energy Saver Timer after the specified time Then it will turn itself off automatically according to the Auto Off Timer after the specified time Note O Default e Typel 90 minutes 1 minute steps Type2 120 minutes 1 minute steps O Auto Off might not be effective when an error message is displayed O To return to the Ready condition from Auto Off the ma chine requires the same warm up time as the time for be coming ready after its power is turned on 12 User Tools System Settings Menu Description Auto Tray Switching If you load paper of the same size in two or more trays re gardless of the paper direction the machine automatically shifts to the other tray when the tray in use runs out of paper when using Auto Paper Select This function is called Auto Tray Switching You can enable or disable this function e If you select On Rotate Auto Tray Switching function will take place for copy ing Lobel FAE GCAUTOOE 1 Original 2 Copy Paper Tray 1 3 Copy Paper Other Trays e If you select On No Rotate Only when paper of the same size and direction is load ed the machine will continue copying If not the ma chine will stop copying and instruct you to load paper
15. ous counters displayed or printed 21 INDEX A AOF Keep It On 21 Auto Off Timer 11 Auto Tray Switching 12 C Copier Document Server Output Tray 13 Copy Count Display 10 Cover Sheet 18 D Date 15 Display Print Counter 21 E Energy Saver Timer 11 F Function Priority 10 K Key Counter Copier Access 19 Key Operator Access 20 Key Operator Code for Off Setting 16 Keys for User Tools System Settings 3 L Language Priority 13 M Memory Allocation 21 O Original Size Setting 14 P Panel Off Timer 11 Panel Tone 10 Paper Tray Priority 14 22 R Ready Panel Tone 10 S Screen Color Setting 13 Separation Sheet 18 Slip Sheet 1 18 Slip Sheet 2 18 Slip Sheet 3 18 Status Indicator 13 System Reset 11 T Time 15 Tray 1 Paper Type 17 Tray 2 Paper Type 17 Tray 3 Paper Type 17 Tray 4 Paper Type 17 Tray 5 Paper Type 17 Tray 6 Paper Type 17 U User Code Display 20 User Codes Copier Document Server 19 User Tools System Settings 3 W Weekly Timer Friday 15 Weekly Timer Monday 15 Weekly Timer Saturday 15 Weekly Timer Sunday 15 Weekly Timer Thursday 15 Weekly Timer Tuesday 15 Weekly Timer Wednesday 15 UE A295
16. rtissement Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada In accordance with IEC 60417 this machine uses the following symbols for the main power switch means POWER ON 5 means STAND BY SAVIN CORPORATION 333 Ludlow Street Stamford CT 06904 203 967 5000 ENERGY STAR Program As an ENERGY STAR Partner we have deter mined that this machine model meets the ENER ENERGY STAR GY STAR Guidelines for energy efficiency AINA The ENERGY STAR Guidelines intend to establish an international energy saving sys tem for developing and introducing energy efficient office equipment to deal with en vironmental issues such as global warming When a product meets the ENERGY STAR Guidelines for energy efficiency the Part ner shall place the ENERGY STAR logo onto the machine model This product was designed to reduce the environmental impact associated with office equipment by means of energy saving features such as Low power mode e Low Power mode This product automatically lowers its power consumption 15 minutes after the last copying or printing job has been completed Printing is available in this mode but if you use the copier press the Energy Saver key For how to change the default interval before entering Low Power mode see Energy Saver Timer P 10 General Features e Auto Off mode To conserve energy this product automatically turns off 90 minutes T
17. set to ON O Default On Copy Count Display You can set the copy counter to show the number of copies in the current job made so far count up or the number of copies to be made count down 2 Note O Default Up count up 10 Settings You can Change with the User Tools Menu Description System Reset If no operation is performed for a selected time the machine will automatically return to initially selected display This function is called System Reset You can set the time between 10 and 999 seconds Note O Default 60 seconds Energy Saver Timer The machine enters the Energy Saver mode automatically a certain time after your job is finished You can set the time between 1 and 240 minutes Note O Default 15 minutes 1 minute steps Panel Off Timer The machine enters to the Panel Off mode automatically af ter your job is finished after the selected time You can set the time between 10 and 999 seconds Note O Default 60 seconds 1 second steps P Reference See Auto Off Timer gt P 10 General Features Auto Off Timer The machine turns itself off automatically to conserve ener gy a certain time after your job is finished This function is called Auto Off You can set the time between 1 and 240 minutes kimportant O If you use these three functions Energy Saver Timer Panel Off Timer and Auto Off Timer when your c
18. steps Paper Type Paper Color Only for Special Paper or Thick Paper Slip Sheet Copy In Duplex Mode Only for Normal Recycled Paper or Special Paper Paper Size Only for Tray 2 and Tray 3 1 Paper Type e You can set only 1 type of copy paper in each paper tray e When specifying the following indications are dis played Recycled Paper when recycled paper is specified Special Paper when special paper is specified OHP Sheet when OHP sheet is specified Translucent Paper when Translucent paper specified Thick Paper when thick paper is specified Tab Stock when index tab paper is specified e Youcan set the amount of copy shift on when Tab Stockis set in the tray The Tab Stock can be set only in tray 4 or tray 5 You can set the amount of shift from 0 to 15mm in 1mm steps 0 0 to 0 6 in 0 1 steps e You can specify the Thick Paper with Tab Stock at the same time In this case you cannot punch on the in dex tab paper Note O Default e Metric version 13mm e Inch version 0 5 e Youcan set Translucent Paper and Tab Stock only in Tray 4 and Tray 5 2 Paper Color e When specifying Special Paper or Thick Paper you can select the color from the following 12 options e 1 None 2 Yellow 3 Green 4 Blue 5 Purple 6 Ivory 7 Or ange 8 Pink 9 Red 10 Gray 11 User Colour Paper 1 12 Let terhead
19. the settings for the Year Month and Day may be changed In this case set the correct Year Month and Day O You need to set this for the Weekly Timer to work prop erly O According to the Year Month and Day you set Date Stamp is set See Date Stamp in the Copy Reference manual Time Set the time for the machine s internal clock PF Note O If the main power switch has been turned off for more than 20 days the settings for the Time may be changed In this case set the correct Time O Enter times using the 24 hour clock 1 minute steps g You need to set this for the Weekly Timer Stamp Docu ment Server and Job preset functions to work properly Weekly Timer Monday Weekly Timer Tuesday Weekly Timer Wednes day Weekly Timer Thurs day Weekly Timer Friday Weekly Timer Satur day Weekly Timer Sunday Set the times when you want the machine to turn itself on off for each day of the week kimportant O The timers do not work if the main power switch is turned off or the power cord is unplugged O To keep the power on throughout the day set both the On and Off timers to zero Note O Enter times using the 24 hour clock 1 minute steps 16 User Tools System Settings Menu Description Key Operator Code For Set a key operator code up to 8 digits to temporarily cancel Off Setting the power off setting of the weekly timer F
20. thority to operate the equipment 1 Properly shielded and grounded cables and connectors must be used for connections to host com puter and or peripheral in order to meet FCC emission limits 2 AC adapter with ferrite core must be used for RF interference suppression This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Ricoh Corporation 5 Dedrick Place West Caldwell NJ 07006 973 882 2000 Note to users in Canada Note This Class B digital apparatus complies with Canadian ICES 003 Remarque concernant les utilisateurs au Canada Avertissement Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada In accordance with IEC 60417 this machine uses the following symbols for the main power switch means POWER ON means STAND BY Copyright 2001 Ricoh Co Ltd Introduction This manual contains detailed instructions on the operation and maintenance of this machine To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual Please keep this manual in a handy place near the machine Please read the Safety Information before using this machine It contains important information related to USER SAFETY and PREVENTING
21. ual For details see P 2 Machine Types e Type 1 2585 8502 e Type 2 25105 10502 Certain types might not be available in some countries For details please contact your local dealer Two kinds of size notation are employed in this manual With this machine refer to the inch version For good copy quality Savin recommends that you use genuine toner Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts in your office product Power Source Type 1 240V 60Hz 10A or more Type 2 240V 60Hz 12A or more Please be sure to connect the power cord to a power source as above For details about power source see Power Connection of the Copy Reference Read this manual carefully before you use this product and keep it handy for future reference For safety please follow the instructions in this manual Note to users in the United States of America Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursu ant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference
22. ue amp Green Type 14 User Tools System Settings Menu Description Paper Tray Priority You can select the paper tray which will be selected as a de fault in the following conditions e When the operation switch is turned on e When a System Reset or Auto Reset occurs e When the Clear key is pressed e When Auto Paper Select mode is selected Tray 4 Tray2 5 Tray3 6 GCTRAYOE Note O Default e When the optional LCT is installed Tray 4 e When the optional LCT is not installed Tray 1 Original F F4 Size Set ting Currently three types of F size are available 81 2 x 13 81 4 x 13 and 8 x 13 The document feeder or platen cover sensor cannot distin guish these 3 types of originals This function is to set the F size in the document feeder or on the platen cover sensor For F size original Auto Paper Select or Auto Reduce En large functions base on this setting Note O Default 81 x13 Settings You can Change with the User Tools Timer Settings When entering Timer Setting mode if a key operator code has already been set you must enter the code up to 8 digits P Reference See Key Operator Access P 19 Key Operator Tools Menu Description Date Set the date for the machine s internal clock FY Note O If the main power switch has been turned off for more than 20 days
23. y Information of the Copy Reference manual A CAUTION This symbol indicates a potentially hazardous situation that might result in mi nor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol Be sure to read the instructions all of which are described in the Safety Information of the Copy Reference manual The statements above are notes for your safety kimportant If this instruction is not followed paper might be misfed originals might be damaged or data might be lost Be sure to read this E Preparation This symbol indicates the prior knowledge or preparations required before op erating Note This symbol indicates precautions for operation or actions to take after misop eration 9 Limitation This symbol indicates numerical limits functions that cannot be used together or conditions in which a particular function cannot be used Reference This symbol indicates a reference Keys that appear on the machine s panel display 4 Keys built into the machine s operation panel TABLE OF CONTENTS Manuals for this Machine 2 c s cssseeeceeeceeecneeceeccnsceneceeccnsecneceescneseneeeees 1 Machine Ty OSa ar enia Dama rapea ramai raaa raaa S sameaa ren aAa Saa Peena sereal eiaa a PEENE EENET 2 1 User Tools System Settings Keys for User Tools System Settings
24. ype2 120 minutes after the last copying or printing job has been completed Printing is available in this mode but if you use the copier press the opera tion switch For how to change the default interval before entering Auto Off mode see Auto Off Timer P 10 General Features e Duplex Priority To conserve paper resources the Duplex function 1 Sided 2 Sided is se lected preferentially when you turn on the operation switch press the Energy Saver key or the machine resets itself automatically To change the Duplex Priority mode see Duplex Priority of the Copy Reference Specification Type 1 Type 2 Low Power mode Power consump 312W 320W tion Default interval 15 minutes 15 minutes Recovery time Less than 40 sec Less than 42 sec onds onds Auto Off mode Power consump 12W 12W tion Default interval 90 minutes 120 minutes Duplex Priority 1 Sided 2 Sided Recycled Paper Please contact your sales or service representative for recommended recycled paper types that may be used in this machine How To Read This Manual Symbols In this manual the following symbols are used A WARNING This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in structions under this symbol Be sure to read the instructions all of which are de scribed in the Safet
Download Pdf Manuals
Related Search