Rowenta 1103897124 Iron User Manual
Contents
1. English Dear customer thank you for purchasing this appliance and for your confidence in us Please read the operating Instructions carefully and keep them in a safe place MA Appliance description 1 LED Traffic Light 6 Filling inlet with push button display opening 2 Spray button 7 Spray nozzle 3 Power steam button 8 Mains supply cord 4 Variable steam control 9 Water tank with maximum water level indicator 5 Temperature control dial 10 Soleplate depending on model Uu E 7 The appliance complies with EU directives 72 23 EEC and 89 336 EEC The appliance may only be connected to alternating current as speci fied on the rating plate If the detachable fuse cover is lost a replacement may be purchased from a Rowenta Service Centre see enclosed Service Information leaflet Information for supply may also be obtained from the plug manufac turer An electrical appliance is not a toy Use and store the appliance out of reach of children Do not let the supply cord hang down Do not leave the appliance unattended while it is connected to the mains supply Electrical appliances generate high temperatures Always use the handles provided and warn other users of the potential dangers e g escaping steam or hot water especially when ironing vertically Never treat clothing which is being worn Always disconnect the appliance before filling or em2. Important If the appliance has been standing unused for N long periods hold it horizontal and allow it to emit steam for approx 1 minute to clean the steam ducts and remove any residue from the iron D Problems a Problems Possible cause Solution The iron is plug No mains supply Check that the mains plug is ged in but the properly inserted or try soleplate of the plugging the iron into a dif iron remains cold ferent socket The soleplate is The temperature Set the temperature control not heating up control is settoo to a higher temperature D properly low LED Traffic Light Temperature con Turn the temperature control display does not trol set to 0 to the required setting light up None or too little There is insuffi Fill the water tank C steam is being cient water in the emitted water tank Anti Drip is active Wait for the soleplate to reach F1 the correct temperature All 3 colours of The automatic cut If moved the appliance will the Traffic Light out has activated switch on again display flash the appliance is alternately on standby The traffic Light The temperature Call our Customer Relations display flashes sensor in the sole Helpline see below red fast plate is defective Brown streaks You are using che Do not add any descaling come through the mical descaling agents to the water in
3. 5
4. Rowenta Werke GmbH 63016 Offenbach am Main 110 389 7124 ROWENTS PERFECT Please read carefully the instructions for use and the Safety Points to Note Pay particular attenti on to the fold out page with the illustrations Bitte lesen Sie diese Gebrauchsanweisung und die Sicherheitshinweise aufmerksam durch Beachten Sie dabei die Abbildungen auf der ausklappbaren Bildseite Lire attentivement le mode d emploi et le con server pour pouvoir le consulter Pendant la lecture d piller la page avec les illustrations Leggere atteritamente le presenti istruzioni per l uso e le norme di sicurezza Osservare la figu ra sui risvolli illustrati Lea en su totalidad el modo de empleo conser v ndolo para consultas posteriores Para su lec tura abra por la p gina ilustrada E favor ler com toda a aten o estas instru es de servi io assim como as instru es de segu ran a Sera convenlente consultarem se as figuras que se encontram nas p gina ilustrada desdobraveil Moxany cta TLIaTeNbHO npouuraitre 3Ty MKCTpyKUNIO no kcnnyatraynn n o6parure oco 6oe BHUMAHHeE Ha npaBuna TexmnKn besonacmoctn Bo epema YTeHNA 3TO MHCTpykKUMM o 6paruro BHUMAHHE Ha pucyHoK M30 paxeHHblM Ha BHYTPEHHON CTOPOHE croenko poLtopbl page Seite 6 page 11 pagina 16 p g 21 pag 26 ctp 31 PERFECT 1 2 3 4 5 6 7 a p
5. ing for the first time and after filling and hea ting up the iron should be allowed to emit steam for at least 1 minute to remove any impurities Filling topping up water A A Before filling the water tank pull out the mains plug and set the steam control to position Tilt the iron The filler inlet can easily be opened by pressing the push button The inlet will open with a click Pour in water up to the max 9 mark Close the filler inlet by pressing the push button again before returning the iron to the horizontal What water may be used Your iron has been designed to operate using tap water However if your water is very hard you can mix it 5096 tap water with 5096 distilled or demineralised water Do not add anything to the contents of the water tank and do not use water from clothes dryers scented or softened water water from refrigerators batteries or air conditioners pure distilled water or rain water These contain organic waste or mineral elements that become concentrated when heated and cause spitting brown staining or premature water to your iron p Setting the temperature D1 Electronic temperature control Thermo Control On your electronic iron you can set the precise ideal tem perature for each material The different types of material are shown on the temperature control dial GENES 00 LETT I Wt linen cotton wool silk synthetics 0 The soleplate of your iron is fitted with an elec
6. ptying the water tank before leaving the room even for a short time after use Never unplug the appliance by tugging on the cord Only safe extension leads should be used Do not immerse the appliance in water An electrical appliance should not be used if the appliance the supply cord or the cord protector is damaged the appliance has been dropped the appliance is obviously leaking In this case the appliance should be returned to an approved Rowenta Service Dealer for repair See enclosed list for addresses Repairs to electrical appliances may only be carried out by specialists Improperly carried out repairs can cause serious danger to users To avoid danger to users a defective or damaged supply cord may only be replaced by an authorised Rowenta service centre Rowenta accepts no liability for damage arising from improper use or operation see also POINTS TO NOTE This appliance is for domestic use only When the appliance has reached the end of its operational life it should be disposed of through the correct channels B Before use A Before doing anything else remove the soleplate protector Before ironing for the first time heat the appliance at the maximum setting see D Setting the temperature A little smoke and a slight smell may be emitted but this is only temporary The water tank can then be filled directly see C Filling with water topping up Before iron
7. quantity and maximum steam We recommend setting to maximum steam quantity only when the iron is at temperature setting E3 Intra Steam Your iron is fitted with the new Intra Steam system This technology generates higher steam pressure to enable the steam to penetrate much faster and further into the fabric This way you get excellent results from your ironing The steam is emitted in frequent bursts rather than conti nuously The pressure generated may cause a slight noise This is not a technical fault E4 Power steam button from temperature setting up To generate a powerful jet of steam and remove stubborn creases press the power steam button Vertical steam ironing from temperature setting up Ideal for removing creases from suits jackets skirts hanging curtains etc Important Never steam or iron clothing that is being worn Hang up the garment on a hanger and hold the fabric slightly taut with one hand Set the thermostat control to maximum steam Hold the iron a few centimetres away from the garment to avoid burning delicate fabrics Press the power steam button repeatedly moving the iron from top to bottom 3 The power steam and vertical steam functions E 4 are also possible if the steam control is setto The interval between bursts of steam should be about two seconds Important Never direct the steam at persons or animals E5 Spray function To dampen stubborn creases p
8. ress the spray button Q Additional functions F1 Anti Drip system Prevents water escaping from the soleplate when the temperature is too low F2 Anti scale system Your iron contains an anti scale cartridge to reduce scale deposits This considerably prolongs the operational life of your iron The anti scale cartridge is an integral part of the water tank and need not be replaced A Do not use descaling agents as these damage the lining of the steam chamber and so may impair the steam function F3 Automatic electronic 3 position cut out depending on model If although switched on the appliance is not moved it will automatically switch off after the following intervals After 30 sec if the iron is standing on the soleplate or lying on its side After 8 mins if the iron is standing on its heel The LED display starts to flash yellow green red in regular sequence If the appliance is moved it will automatically switch on again and begin to heat up again e After ironing Unplug from the mains pour away remaining water and set steam control to Then allow the appliance to cool down Store the iron standing on its heel Do not wind the cord round the hot soleplate Cleaning and maintenance When the appliance has cooled down wipe it down with a damp cloth or sponge as required Dirt can be removed from the soleplate with a damp cloth or sponge Do not use sharp or abrasive cleaning agents or objects
9. the holes in the sole agents water tank plate and stain gt E 3 TS the fabric You linen is not Ensure linen is rinsed rinsed sufficiently or you have ironed a new garment before washing it thoroughly to remove any soap desposits or chemicals on new garments which may be sucked up by the iron The soleplate is dirty or brown and can stain the linen You are using starch You are using a too high temperature See the temperature table to correctly set the thermostat Clean the soleplate as indi cated above Always spray starch onto the reverse side of the fabric to be ironed The soleplate is scratched or You have placed your iron flat on a Always set the iron on its heel damaged metallic rest plate You have ironed Try to avoid ironing over zips C over a zip which may have rough pug If you have any further problems or queries with our products please call our Customer Relations team first for expert help and advice HELPLINE 0845 602 1454 UK 01 4751947 Ireland If you are unable to trace the cause of the fault contact an official Rowenta Customer Service Centre The addresses are shown in the enclosed service centre address list Further hints and tips are obtainable from our homepage www rowenta com In line with a policy of continuous product improvement Rowenta reserves the right to change product specifications without prior notice
10. tronic sen sor which continuously monitors the temperature of the soleplate and keeps it at the precise selected setting This enables you always to iron at the optimum temperature D2 LED TRAFFIC LIGHT DISPLAY The traffic lights tells you whether the soleplate is at the selected temperature see table below f Colour LED display This means What to do N S The soleplate is You can start ironing RS still too cold for now but the soleplate YELLOW the selected is not yet at the selec material ted temperature ooo The soleplate is You can start ironing GREEN at the right tem now The soleplate is at perature forthe the optimum tempera selected material ture for your material The soleplate is Wait for the iron to cool Qy still too hot for down to the selected RED ENS the selected temperature and the material LED display to switch to GREEN Tip We recommend that you start with fabrics to be ironed at a low temperature as the iron takes longer to cool down than to heat up For mixed fabrics set the tempe rature for the most delicate fabric Ironing and Steam functions E1 Dry ironing To iron without continuous steam turn the steam control to and set the temperature to suit the type of material care points E2 Steam ironing You can steam iron from temperature setting up The steam quantity can be set to between minimum steam
Download Pdf Manuals
Related Search