Home

RCA P52936 Projection Television User Manual

1. Closed Captioning Modes The TV offers eight closed captioned modes including four text modes To Set the Closed Captioning Mode 1 Select Screen from the Main menu 2 Point to Closed Caption Mode and press OK A choice list appears 3 Point to your choice and press OK to select it and return to the Screen menu Turning off Closed Captioning 1 Select Screen from the Main menu 2 Press OK to select Closed Caption Display 3 Point to Off Always and press OK The closed captioning is turned off and you are returned to the Screen menu ADJUSTING THE COLOR PROJECTION TUBES Your projection TV has three color projection tubes one for red one for green and one for blue When the tubes are precisely aligned they create the color images you see on the TV screen Over time the picture can drift out of alignment due to normal component aging bumps and vibrations or moving the TV If you notice rings or halos around objects in the picture you may want to readjust the alignment of the picture tubes To readjust the picture tubes first do an overall adjustment with the Adjust Projection TV option in the Screen menu The Adjust Projection TV option is used to center the green tube and align the blue and red tubes to the green tube To make finer adjustments to specific areas of the screen use the Advanced Convergence feature described on the next page To readjust the picture tubes 1 Allow the set to warm up for at least 20
2. o0 09 VIDEO RaAuDIOL In the nteractive Setup section you can program the TV to automatically tune to the VID1 input channel when you turn on the VCR Most Audio Video cables are combined into one cable with three heads on each end CABLE We show individual cables in these sample Video yellow connections Either may be used but Right Audio red Once you have completed this connection go to Step 3 you must be sure to Connect the G LINK Cable on page 9 connect Video to Left Audio white Video Right to Right and Left to Left SETUP AND CONNECTIONS THE BASIC CONNECTION PIP NOT AVAILABLE Note This connection does not allow PIP The basic connection below TV and VCR is used to illustrate a single to work component connection with your TV For better sound and picture quality and multiple component connection information refer to Advanced Connections Cables You will use the following cable to make your connection Coaxial Cables These cables carry both the audio and video signal to the TV from an antenna cable or cable box In this connection a second Coaxial Cable carries the signal through the VCR to the TV FROM CABLE CABLE BOX OR ANTENNA OUT VIDEO AUDIO How to View the VCR INPUT 2 INPUT 1 j To watch the VCR in this connection tune TV to VIDEO Q r 1 IG AUDIO Q AUI CABLE LL La ANTENNA INPUT 6 e SVIDEO AUDIO OUTPUT NY Channel 3 or 4
3. 43 44 FEATURES AND MENUS Getting In amp Out of the GUIDE Plus System To enter the GUIDE Plus system Press GUIDE on the remote There are three ways to exit the GUIDE Plus system Highlight a program and press OK to exit the GUIDE Plus system and tune to the channel Press GUIDE to exit the GUIDE Plus system and tune to the channel displayed in the video window Press CLEAR to exit the GUIDE Plus system and return to the original channel The GUIDE Plus System Menus The GUIDE Plus system offers seven different options on the Menu bar Grid Sort News Schedule Messages Channels and Setup To access the Menu bar 1 Press GUIDE to access the GUIDE Plus system 2 Press MENU or use the up and down arrow buttons to select the Menu bar the Grid Guide appears by default 3 Use the left and right arrow buttons to access other menus 4 Press OK or MENU or use the down arrow button to see the menu options GRID GUIDE The Grid Guide appears each time you enter the GUIDE Plus system It displays the current programming for each channel The current program is displayed in the video window Press the up and down arrow buttons on the remote to browse channel listings and the channel up and down buttons to page through the listings Use the right and left arrow buttons to browse future program listings To tune to a channel highlight the program you want to view in the channel listing and pres
4. When exiting this menu the Save Personal Picture Preset Choice List will appear You can choose either Yes or No VCR1 ON OFF TV Loto wl DVD VCR2 AUXSAT CABLE ASAA Sound button SOUND GO BACK 2 Picture Quality 1 Basic Picture Controls Picture Quality menu FEATURES AND MENUS Picture Presets Displays a choice list that lets you select one of four preset picture settings Bright Lighting Normal Lighting Soft Lighting or Press the RESET button on the remote to bring up the Picture Control Presets choice Personal Picture Presets Choose the setting that is best for your viewing i list Point to the desired setting press environment and edit your Personal Picture Preset MENU or OK to select it Auto Color Displays a choice list that lets you turn on the feature that automatically corrects the color of the picture This is especially useful for tracking realistic flesh tone colors as you switch from channel to channel Choose On or Off depending on your preference It s your choice Color Warmth Displays a choice list that lets you set one of three automatic color adjustments Coo for a more blue palette of picture colors Normal and Warm for a more red palette of picture colors The warm setting corresponds to the NTSC standard of 6500 K Video Noise Reduction Displays a choice list that lets you turn on the feature that automatically reduces noise from the picture SCREEN MENU
5. 1 SETUP AND CONNECTIONS INTERACTIVE SETUP 3 USING THE REMOTE FEATURES AND MENUS 5 REFERENCE N lt m lt lt 12 INTERACTIVE SETUP USING POINT AND SELECT You only need to know one rule when using the remote to access on screen menus and control panels point and select The point and select method has two steps 1 Point to a menu item using the arrow buttons on the remote To point up or down press the up or down arrows To point left or right press the left or right arrows 2 Select a menu item by pressing MENU or OK Selecting an item tells the TV s menu system to go ahead and make the change or go to a place you have indicated ENTERING SETUP The first screen of the Interactive Setup appears automatically when you turn on your TV for the first time or after a power outage 1 Press MENU to begin setup or CLEAR to exit SETUP When first used or after a power outage your television needs to be set up Would you Like to begin now You can also access the Interactive Setup through the Main menu 1 Press MENU to bring up the Main menu TV MAIN MENU 2 Point to Setup and press MENU or OK The first Setup screen comes up asking you to confirm that you want to begin Point and Select buttons You can also select a menu item by entering the item number with the number buttons on the remote Press CLEAR at any time to remove all displays from the screen and return to
6. 2001 2000 2001 2003 2013 2021 2055 2056 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2107 2115 2120 2125 Radioshack Realistic 2002 2011 2013 2014 2021 2022 2023 2026 2029 2049 2050 2096 2131 2014 2014 2128 2104 Randex Ricoh Runco Samsung 2005 2013 2015 2033 2053 2112 Sanky 2132 2104 Sansui 2010 2092 2111 2123 Sanyo Scott 011 2014 2021 2023 2048 2049 2050 DE DN 2051 2055 2056 2107 2118 Sharp 2002 2017 2029 2094 2095 2096 2131 Shintom 2004 2056 2061 2098 Shogun ede ette entiendes tds 2013 Signature 2002 2131 Singer 2021 2061 2128 Sony 2002 2004 2098 2099 2119 2128 STS 2021 2107 Sylvania 2002 2021 2022 2026 2062 2063 2065 2124 Symphonic 2002 2026 Tandy 2002 2011 3Tashiko 25 5e onde dU e SAI tet 2014 Tatung 2058 2111 TEAC 2002 2026 2058 2085 2111 mE 2021 2109 2002 2014 2021 2026 2100 2129 2013 2024 2047 2015 2049 2051 2055 2065 2093 2116 2013 2014 2013 2009 2010 2015 2016 Technics Teknika Tmk Toshiba ToteVision Unitech Vector Research Video Concepts Videosonic XR 1000 Yamaha Zenith 2009 2010 2011 2018 2058 2111 2004 2098 2104 2119 2128 For RCA and Dimensia brands only AM FM Aux Phono CD Tape Cable Boxes ABC se
7. Closed Caption Display Displays a choice list that lets you choose the way closed captioning information is shown on the screen 3 Screen Off No captioning information displayed i n 1 CLosed Caption Display On Captioning information shown always when available On When Sound is Muted Displays captioning information when available whenever the TV s sound is muted by pressing the MUTE button The captioning information is not displayed when the sound is not muted Closed Caption Mode Displays a choice list that lets you choose which captioning mode is used for displaying captioning information Menu Language Displays a choice list that lets you select your preferred language for the menus English Spanish or French Adjust Projection TV Lets you adjust the TV s three colors Selecting Green Centering brings up a control panel that lets you center the green projection tube on the screen Selecting Red Convergence or Blue Convergence lets you align the red and blue projection tubes USING CLOSED CAPTIONING Many programs are encoded with closed captioning information which lets you display the audio portion of a program as text on the TV screen Closed captioning is not available on all channels at all times Only specific programs encoded with closed captioning information are applicable When a program is closed captioned the letters CC are displayed in the channel marker 31 32 FEATURES AND MENUS
8. DVD VCR2 AUX or SATeCABLE on the remote Set VCR 1 Channel Displays a choice list that lets you select the OIE channel that the TV tunes to when you press the VCR1 button Set VCR2 Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the VCR2 button SET VCR1 CHANNEL Set DVD Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the DVD button 1 Not connected Set SAT Cable Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the SATeCABLE button The choices for each screen are Not Connected Choose this if you do not have a component connected to an antenna or video input on the back of the TV or if you don t want the TV to tune to a channel when the particular component button is pressed Channel 2 SAT Cable only Choose this if your component is connected to the antenna jack on the back of the TV and you want the TV to tune to channel 2 when you press the specified component button Reminder Make sure the component s Ch 2 3 4 switch is set to channel 2 34 FEATURES AND MENUS Channel 3 Choose this if your component is connected to the antenna jack on the back of the TV and you want the TV to tune to channel 3 when you press the specified component button Reminder Make sure the component s Ch 3 4 switch is set to channel 3 Channel 4 Choose this if your component is
9. Later in the Interactive Setup section you will program the TV to automatically tune to Channel 3 or 4 when you turn on the VCR Once you have completed this connection go to Step 3 Connect the G LINK Cable on page 9 SETUP AND CONNECTIONS ADVANCED CONNECTIONS Once you have made your connections you will want to program the TV to tune Advanced connections give you better sound and video by separating to the correct Video INPUT channel in the audio and video signals and enable you to connect multiple order to see and hear audio and video components from the component You will program this later in the Interactive Setup This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance Back of the TV The diagram below describes each of the back panel jacks When connecting A V cables be sure to connect corresponding OUTPUTS and INPUTS Video to Video Right Audio to Right Audio etc Input 2 VIDEO or Y P P Connect any of the following components to INPUT 2 e VCR Internet Access Device Laserdisc Player DVD Player Satellite Receiver Input 1 The Y P P jacks are used in place of the VIDEO jack to connect Connect any of the following components an optional component video source such as a DVD player Unlike e VCR e Internet Access Device a single video input the Y P P jacks maintain the video signal as Laserdisc
10. Most audio video connections between components can Push on Connector Screw on Coaxial Round 75 ohm coaxial cable Connector n Flat 300 ohm twin lead cable be made with shielded audio and video cables that have RCA type phono connectors Standard Audio Video cable with RCA type phono plugs such as No VH83 Color Coded Jacks The jacks on the TV s monitor panel are color coded for ease of use The video jacks are yellow the right audio jacks are red and the left audio jacks are white When connecting components to each other be sure that you always connect left outputs to left inputs and right outputs to right inputs If a component has only one output mono connect it to the r mono input jack To connect S VHS Super VHS components an S VHS video cable is required S Video cable such as No VH913 Gold Plated Jacks and Gold Tipped Cables Gold plating helps prevent oxidation of contacts which provides much less loss than conventional contacts A complete line of gold tipped cables is available to help you obtain optimum performance from your equipment The following accessories are available from most dealers and electronics supply stores in case you want to position your components farther apart or need additional cables Antenna Cables VH81 3 ft VH82 6 ft VH89
11. Press again to remove the PIP window PLAY If you re operating a VCR or DVD Player plays the disc or videotape RECeVCR In TV mode when the GUIDE Plus program guide is on the screen press RECeVCR to program your VCR to record a program RESET Resets picture quality controls to the Bright Lighting Picture Control Preset Point and select to choose a different Picture Control Preset REVERSE If you re operating a VCR or DVD Player press REVERSE to go backwards on a video tape or disc SAT CABLE Puts the remote in SATeCABLE mode and if auto tuning is enabled it will turn on the TV and tune to the correct channel SKIP Press once before changing channels and the TV will wait 30 seconds before returning you to the original channel Press repeatedly to add more time SOUND Press once to display the audio processor choice list Point and select to choose a different processor or press CLEAR to exit STOP If you re operating a VCR or DVD Player press to stop playing the videotape or disc SWAP Swaps the main picture with the PIP window TV Turns on the TV and puts the remote in TV mode Also displays channel information VCR1 Puts the remote in VCR mode and if auto tuning is enabled it will turn on the TV and tune to the correct channel VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled it will turn on the TV and tune to the correct channel VOL or VOL Decreases or increases the TV s volume WHO INPU
12. Record ipit a 1 1 D Tiger Woods Wins PGA in Thiling Playoff Wd Y Tiger Woods seemed unbeatable at Valhalla but earned pe his place in history Sunday by winning the PGA B Championship in Louisville by a single strol The News menu lets you browse current news stories by headline News Menu Mefse utbe Selection a 1 If the GUIDE Plus system isn t on your screen press GUIDE on your i OO Ten remote control Tumoutto be Key to 2000 Campaign a Is Wall Street out of the Woods 2 Press MENU on the remote control to select the menu bar T ocs ele 220 Magic Word for Fyers 3 Use the arrows to highlight News if MSNBC is available on your TV it Pe Makingthe temet Safe for Democracy will appear in the video window ze Eust nennen 4 Usethe up and down arrows to highlight a story e Use the up and down arrows to browse the list one story at a time e Use the channel up and down to browse through the list one page at a time 5 Pressthe right arrow button to see full text 6 If there are multiple pages of text press the right or left arrow button to page forward or back through the pages of text Press the down arrow to view the next story 7 Select MENU to return to the Menu bar or press GUIDE or CLEAR on the remote to exit the GUIDE Plus system SCHEDULE Schedule Menu Action Buttons The Schedule menu lets you create timers for either viewing or recording programs The GUIDE Plus system allows one b
13. Second Audio Program 52 SAT Cable Channel 34 Satellite Receiver remote codes 26 Schedule 35 Screen menu 33 Set DVD Channel 18 34 SAT Cable Channel 19 34 VCR1 Channel 16 34 VCR2 Channel 17 34 Set Time 35 Setup Menu 35 Setup Screen 12 Sharpness 30 Signal Type Cable TV 33 UHF VHF Antenna 33 Sleep Timer 35 52 Sort menu 46 Sound Logic Stereo 29 Stereo 29 52 T Time menu 35 Time of Day setting 16 Tint 30 Tone Controls 29 Troubleshooting 53 U UHF VHF Antenna 33 V V Chip Age Based Ratings 36 Blocking Movies 41 Content themes 36 Variable Output Speakers 30 VCR Channels 16 34 VCR remote codes 26 Video Noise Reduction 31 W Warranty 56 Y YPBPR 6 61 Visit the RCA web site at www rca com Please do not send any products to the Indianapolis address listed in this manual or on the carton This will only add delays in service for your product Thomson multimedia Inc 10330 North Meridian Street Indianapolis IN 46290 2001 Thomson multimedia Inc Trademark s 8 Registered IN Marca s Registrada s THOMSON Printed in USA TOCOM 1554967A THOMSON fj
14. Troubleshooting indere E 53 PIP Troubleshooting eeseesesseeneneeeeneeeennen nen 54 Care and Cleaning ussite temet ees 55 The Front of Your TV essssseeeeeeeeeenenennenen eene nnne nn entren 55 Limited Warranty sssssssssssesseeeeennne enne nnns 56 Accessory Information sess eene nnns 58 nfe 2 cu EE 61 SETUP AND CONNECTIONS GETTING STARTED This manual is designed to get you started quickly The first four sections of the manual show you how SETUP AND CONNECTIONS to get your TV Setup and Connected run the Interactive Setup Program the Remote and use all of the Features and Menus of your TV The Reference section in the back of the book contains troubleshooting tips accessory ordering information and your warranty INTERACTIVE SETUP 3 USING THE REMOTE FEATURES AND MENUS 5 REFERENCE Y Y Y Y Check out the notes that have been added throughout the manual in these Tip Boxes There are some important tips that will help you get the most from your TV SETUP AND CONNECTIONS STEP 1 UNPACK THE TV Make sure to locate the remote control STEP 2 CONNECT YOUR TV In order to protect against power surges e Connect all components before plugging any power cords into the wall outlet e Turn off the TV and or component before connecting or disconnecting any cables e Make sure all antennas and cables are properly grounded Refer to t
15. 4 Usethe right arrow to move the yellow highlight to the rating status field Parents Strongly Cautioned 5 Press the up or down arrow to toggle from View to Block The status for the rating listed to the left and all higher ratings automatically changes to Block B Parental Guidance Suggested 6 Press MENU or OK on the remote to return to the menu or exit the General Audience screen when you are finished Directed to Children 7 years and older TV Y All Children Pressing RESET on the remote will reset all ratings to View and V 7 Select Lock Parental Controls from the Parental Controls menu Enter a password and if you have not already set your password you will be prompted to enter it again to confirm Viewing Age Based Ratings Rating status field After you block age based ratings you have the option of changing some of the ratings back to View V CHIP TV RATING cone EM ET Rating Status DLS V FV 1 Determine which blocked rating you want to view i View Content 1e TET P v to block ith status 2 Use the left and right arrows to highlight the Rating Field i reo Pec bsc d fields STATUS DL S V FV 3 Usethe up and down arrows to select the rating whose status is Block Block View V OCK Block B g View 4 Press the right arrow to move the yellow highlight to the rating View status field 5 Press the up or down arrows to toggle between View and Block You must remember to
16. Block 4 Channel Block 5 Front Panel Block 6 Lee Danantal Cantnal ea 06 FRONT PANEL BLOCK l 1 1 Unblock 2 Block PARENTAL CONTROLS 1 V Chip TV Rating Limit 2 V Chip Movie Rating Limit 3 V Chip Unrated Program Block 4 Channel Block 5 Front Panel Block 6 Lock Parental Controls FEATURES AND MENUS ABOUT THE GUIDE Plus SYSTEM The GUIDE Plus system is an interactive on screen program guide that lists TV schedules for your area and allows your TV direct control of a cable box and VCR You must first set up the GUIDE Plus Menu system in order to view it see the nteractive Setup section for more details To bring up the GUIDE Plus system press GUIDE There are six sections to a GUIDE Plus system e A row of Action buttons at the top of the screen numbered 1 2 and 3 e Video window e Program information e Arow of Menu options e Channel listings e Promotional information Note The GUIDE Plus system screens illustrated in this book are representations of what you are likely to see Not all channels programs and GUIDE Plus information depicted will be available in your area New features and options can be downloaded to the GUIDE Plus system so these too are subject to change DOWNLOADING DATA The GUIDE Plus system is not available until it completes its first download of program listings When the power is turned off the TV locates a host channel that carries GUIDE Plus system da
17. Picture Controls 30 Batteries 10 Black Level 30 Buttons remote 22 C Cable Box remote codes 26 Channel labeling 20 Lineup 43 menu 33 number 34 Channel 3 35 Channel 4 35 Channel Block 42 Channel Labels 34 Channel Marker 52 Closed Caption Display 31 Mode 31 Coaxial cable 5 6 Color 30 Projection Tubes 32 Warmth 31 Connections Advanced 7 Basic 6 TV and stereo VCR 5 TV VCR and Satellite receiver 8 TV VCR Satellite Receiver and DVD 8 Content Themes 37 Contrast 30 Control Panels 28 D DVD Channel 18 34 F Finding the sensor 9 Fixed Output Speakers Off 30 Front Panel buttons 55 Front Panel Block 42 G G LINK 9 Grid Guide menu 44 GUIDE Plus System 14 43 Channel Lineup 43 Setup 14 l INPUT1 35 INPUT2 35 J Jacks on the TV 7 L Labels 20 34 Language 13 31 List amp Labels Feature 20 M Menu Audio 29 Channel 33 Grid Guide 44 News 47 Picture 30 Screen 31 Setup 35 Sort 46 Time 35 Menu Language 13 31 Menus 28 Mono 29 Mute 29 N News menu 47 Normal List 34 P Parental Controls Channel Block 42 Front Panel Block 42 Lock Unlock 42 Picture Presets 31 Picture Quality menu 31 PIP Picture in Picture 50 buttons 51 Troubleshooting 54 Point and Select 12 Programming the remote 24 Projection TV convergence 31 R Rating Limits Movie 41 TV 37 Remote Control buttons 22 Installing the batteries 10 Programming 24 sensor 9 Remote control sensor 9 S S Video cable 5 SAP
18. Player DVD Player three separate signals through these three jacks To ensure maximum picture quality use three video grade cables for the Y P and P connections Satellite Receiver To view the component connected to Input 1 Use tha WHO INPUT button on the remote To View the component connected to Input 2 Use the WHO INPUT button on the remote S Video INPUT 2 i This optional INPUT 1 VIDEO G LINK connection can VIDEO Qo Connect the G LINK be used for r 1 i cable for one button better video AUDIO CABLE recording and gt LL L ANTENNA quality e Q INPUT channel tuning from S VIDEO AUDIO OUTPUT O the Guide Audio Outputs Cable Antenna Connect to an audio receiver or Takes the signal input from a cable amplifier for variable controlled cable box or an off air antenna Can also or fixed level stereo output be used for basic component connections SETUP AND CONNECTIONS TV VCR and Satellite Receiver CABLE CABLE BOX OR ANTENNA SATELLITE ooo UE cH3 VIDEO RAUDIOL CH4 OUT o 5 oum TOTV Once you have completed this connection go to Step 3 Connect the G LINK Cable on page 9 TV VCR Satellite Receiver and DVD CABLE CABLE BOX OR ANTENNA SATELLITE IN FROM a cual ow TOTV Once you have completed this connection go to Step 3 Connect the G LINK Cable on page 9 8 How to View Your Components To watch the Satellite Receiver in this connection press T
19. Press the 3 key to turn this channel on or off Change the channel number using your remote s number eys Channels Menu Selection Tonight 10 9 pm 49 FEATURES AND MENUS SETUP The Setup menu allows you to access the GUIDE Plus system setup information To access the Setup option 1 If the GUIDE Plus system isn t on your screen press GUIDE on your remote control 2 Press MENU to select the Menu Bar 3 Usethe right arrow to highlight the Setup menu selection 4 Usethe up and down arrows to select Change system settings Review options or View demo Change system settings Confirms the settings you completed in the GUIDE Plus system setup are correct Review options Displays the GUIDE Plus auto display options On Automatically displays the GUIDE Plus system when you press the ONeOFF button on the remote control Off Disables the GUIDE Plus system from being displayed when you press the ON OFF button on the remote control View demo Runs the GUIDE Plus system demonstration Note If you have not completed your GUIDE Plus system setup these options will not be available A screen will prompt you to complete your setup HOW TO GET MORE INFORMATION ABOUT AN ADVERTISEMENT OR A PROGRAM 6 36pm 1 Watch 2 GoTo 3 Record aunet E SENE SportsCenter Highlights of the day s sports B A with Linda Cohn and John Anderson Y Ii To find out more information about a program advertisement
20. TV viewing INTERACTIVE SETUP SETUP Would you Like to begin Setup now 1 Begin setup now 2 Cancel setup 3 Point to Begin setup now and press MENU or OK SELECT A LANGUAGE The first part of the setup routine asks you to select your preferred language for the menu system SETUP Select the Language to be used in these menus 1 English 2 Espa ol 3 Fran ais 1 Point to your preferred language for the menu system 2 Press MENU or OK to select that language AUTO CHANNEL SEARCH The next part of the setup routine asks you if you want the TV to search automatically for all channels available through your antenna or cable TV system This is sometimes called autoprogramming SETUP Would you Like the TV to search for all available channels 1 Search for channels 2 Skip this step 1 Press MENU or OK to tell the TV to begin searching for channels The display gives you a progress report and tells you when it has finished 2 Press MENU or OK to continue If you skip Auto Channel Search now you can access it later through the Channel menu You can also put channels in memory manually using List amp Labels See Features and Menus for more details 13 INTERACTIVE SETUP THE GUIDE Plus SYSTEM You can set up the GUIDE Plus System during Interactive Setup You can The next step lets you set up the GUIDE Plus System to display your local program also access the GUIDE Plus l
21. Use the arrows to highlight the Schedule menu selection Poway m Use the up and down arrows to highlight the program you want to edit Then use the Schedule Menu Action Buttons as described next Schedule Menu Action Buttons When viewing the Schedule menu the following Action buttons will appear on the bar 1 Remove 29 3 Change e Remove Highlight the Watch or Record timer you wish to remove from the schedule and press 1 on the remote e Change Highlight the Watch or Record timer you wish to change and press 3 on the remote to toggle the frequency between the following choices DAILY ONCE records only on that day WEEKLY records the program each week at the same time MESSAGES Occasionally you will receive messages regarding your GUIDE Plus system as well as special programming information You can access these messages from the Message Menu on the Menu bar To read messages 1 Press MENU on the remote to select the Menu bar 2 Usethe arrows to highlight the Messages menu selection 3 Highlight the message you wish to read by using the up and down arrows 4 Press INFO to display the full text of the message If the text continues beyond the screen press INFO to view the next page of text Once you have reached the end of the message pressing INFO closes the expanded information and returns you to the Messages screen 5 Then use the Messages Menu Action Button as described in the next section recor
22. V not locked you will get a message reminding you that your limits will gio d EY not be effective until you lock Parental Controls TV G View TV Y7 View TV Y View 2 Press MENU to continue 3 Highlight and select V Chip TV Rating Limit 4 Once you get to the V Chip TV Rating Limit screen use the arrows and OK on your remote to change the status of a TV program rating or content theme from View to Block The following sections give you more details about how to change the status of TV program limits 37 FEATURES AND MENUS The Ratings Limits Screen Below is an example of where items are located within the Rating Limits screen Rating Field Lets you select from a list of age based ratings you can block or view Rating Status Field Lets you select whether the status of the age based rating limit to the left is View or Block V CHIP TV RATING LIMIT Content Rating Status DLS V FV Content Themes j Lists the content E VVV themes you can block Press v to select rating or view Press MENU to exit RATING STATUS D TV MA View Fields TV 14 View V Lets you select which TV PG View V content themes to TV G ed view for the selected a rating and whether gd y md the status of the i 1ew content theme is ess currently View V or Rating Settings Area Block B Lets you see the current block view state of age based ratings and associated content The View V settings are coded in gre
23. Video Cable 6 ft VH976 7 95 S Video Cable 12 ft VH913 14 95 2 way Signal Splitter helps 2 way Signal Splitter VH47 3 95 you connect to a second TV or VCR Amplified Antenna ANT200 49 95 Antenna Mixer 193984 11 15 Remote Control CRK76TA1 240895 29 20 Splitter Audio Video Adapter 228449 4 45 VH47 Amplified VHF UHF FM Antenna allows you to easily switch from the antenna signal to cable or satellite without disconnecting antenna Total Merchandise ANT200 Sales Tax We are required by law to collect the appropriate sales tax for each individual state country and locality to which the merchandise is being sent Shipping and Handling Total Amount Enclosed Use VISA MasterCard or Discover Card preferably Money order or check must be in U S currency only No COD or CASH Prices are subject to change without notice All accessories are subject to availability Detach Here Please complete other side also 59 REFERENCE Charge your order on your VISA MasterCard or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT Copy complete account number from your VISA card ESTE ERES SET ESTEE My card expires CL T a VISA es IMPORTANT Copy complete account number from your MasterCard CoO CC ooo ooo LIII se CO Copy Number above your name on MasterCard IMPORTANT Copy complete account number from your Discover Card LTT TILET TICLE TIC
24. avoid placing drinks or vases with water on top of the TV This could increase the risk of fire or shock hazard or damage to the TV Caution Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube or projection TV picture tubes ALSO some network program logos phone numbers etc may cause similar damage This damage is not covered by your warranty THE FRONT OF YOUR TV Front Panel Buttons If you can t find your remote control you can use the buttons on your TV to operate many of the TV s features MENU Brings up the TV MAIN MENU When in the menu system it selects highlighted items Also returns you to the previous menu Press and hold MENU for two seconds to access the GUIDE Plus system CH v Scans down through the current channel list When you re using the TV s menu system it acts like the arrow down button on the remote control CH Scans up through the channel list When you re using the TV s menu system it acts like the arrow up button on the remote control VOL Decreases the volume When you re using the TV s menu system it acts like the left arrow button on the remote control VOL Increases the volume When you re using the TV s menu system it acts like the right arrow button on the remote control POWER Turns the TV on and off The Front Panel Block feature disables all front panel buttons For more information s
25. connected to the antenna jack on the back of the TV and you want the TV to tune to channel 4 when you press the specified component button Reminder Make sure the component s Ch 3 4 switch is set to channel 4 Video 1 Input Choose this if your component is connected to the INPUT1 jacks on the back of the TV and you want the TV to tune to VID1 SVID1 if you used an S Video cable input channel when you press the specified component button Video 2 Input Choose this if your component is connected to the INPUT2 jacks on the back of the TV and you want the TV to tune to VID2 COMP2 if you used the Y P P jacks input channel when you press the specified component button TIME MENU NAIN MENU Audio 7 Sleep Timer Displays a control panel that lets you select the amount of RA ce Quality time you want to give the TV before it shuts itself off Channel Schedule Displays a control panel that lets you set up a schedule for PINE turning the TV on and off automatically Make sure to turn the schedule on The on screen directions guide you through the steps needed to set the schedule zu Ef 0 Exit Set Time Displays a control panel that lets you enter the current time The on screen directions guide you through the steps needed to set the time If your GUIDE Plus system is setup and running then it will automatically update your time and this option will not be available SETUP MENU TV MAIN MENU Audio Picture Quality Screen Channel Time
26. don t connect the G LINK cable no channels will be listed in the on screen program guide VCR If your TV is connected to a VCR and you don t connect the G LINK cable one touch recording won t work The other features of the guide will work properly HOW TO FIND THE REMOTE CONTROL SENSOR You have to place the G LINK wands in front of the remote control sensor on the VCR and or cable box Some cable boxes and VCRs have the remote control sensor labeled on the unit If the remote sensor isn t labeled on your VCR and or cable box you need to use the remote control that came with the VCR and or cable box to locate the sensor 1 Turn off the VCR and or cable box 2 Hold the remote control not the one that came with your TV but the one that came with the cable box and or VCR to which you re connecting the G LINK cable so it is touching the front of the component 3 Slowly move the remote control across the front of the component VCR or cable box while you press the power button on and off You must press and release the power button each time you move the remote holding down the button won t work Cable Box 4 When the component turns on you ve located the remote control sensor 5 Place the wands of the G LINK cable underneath your VCR and or cable box see instructions on right The G LINK cable is used to send commands to your VCR and or cable box If there is a demo pin
27. e If using a VCR check to make sure the TV VCR switch on the VCR is in the correct position 53 54 REFERENCE Noisy stereo reception e May be a weak station Use SOUND button to change to mono mode instead of stereo No picture no sound but TV is on e Maybe the cable air function is set to the wrong position e Maybe a vacant channel is tuned e If watching VCR connected only through antenna input make sure TV is tuned to channel 3 or 4 same as CH3 4 switch on VCR Also check to make sure TV VCR switch on VCR is in the correct position Sound okay picture poor e Check antenna connections e Try adjusting sharpness function to improve weak signals Black box appears on the screen e Captioning may be turned on Check the Closed Caption Display control panel in the Channel menu G LINK Cable not working e Check to make sure the wands are positioned correctly e GUIDE Plus system control of cable box is slower than direct control of the box itself Keep this in mind when changing channels Incorrect GUIDE Plus System channel map e The guide may get out of sync with the cable provider Use setup to change the zip code to 99999 Turn the TV off for ten minutes Use setup again to change the zip code to the correct value Be sure to select the correct lineup if asked PIP TROUBLESHOOTING CABLE CABLE BOX OR ANTENNA e The PIP feature on this TV only works if you connect a second video source like a VCR or satellit
28. follow these steps to use your VCR to supply the picture for PIP 1 The TV must be on Tune to the channel you want to watch Press the PIP button on the remote the PIP picture appears with the same picture in it as the main picture 2 Turn on the VCR 3 Ifthe picture gets fuzzy press the TV VCR button on the VCR 4 To see a different picture in the PIP window e Press the TV button on the remote control Press the WHO INPUT button on the remote until you see the picture that s coming from the VCR PIP VID1 or PIP VID2 appears on the screen depending on which input jack you use 5 To change the picture in the PIP window you need to change the channel on the VCR because the VCR is the second signal source Press the channel buttons on the VCR or on the VCR s remote control 6 Tochange the channel in the main picture press CH CTRL until the main channel number appears highlighted yellow Press the channel up or down buttons on the remote control Note The channel up and down buttons won t work correctly when the VID channel is highlighted yellow PIP Buttons There are seven remote buttons that control the way the PIP window works PIP Brings up the PIP window Press PIP again to remove the window Arrow buttons left right up down Move the PIP window to different areas of the screen SWAP Switches or swaps the video from the PIP window with the main picture CH CTRL Channel Control Lets yo
29. front panel The remote still tunes to any channel Front Panel Block can e Keep children from watching TV when the parent is not present e Keep small children from playing with the buttons When using this as a Parental Control method you should remove access to any remote capable of controlling the front panel while you have the Front Panel blocked Don t forget to lock parental controls after you change the status If you do not the front panel block will not take effect LOCK UNLOCK PARENTAL CONTROLS Selecting this option lets you lock and unlock parental controls settings using a password If you do not lock parental controls none of the settings for V Chip Channel Block or Front Panel Block will take effect If you forget your password press and hold TV on the remote and the MENU button on the television simultaneously for 3 seconds Parental controls will then unlock and you can re enter a password via Lock Parental Controls PARENTAL CONTROLS 1 V Chip TV Rating Limit Movie Rating Unrated Prog EUN a 5 Fri 6 Loi 0 Ex 2 Block V CHIP UNRATED PROGRAM BLOCK PARENTAL CONTROLS 1 V Chip TV Rating Limit 2 V Chip Movie Rating Limit 3 V Chip Unrated Program Block 4 Channel Block CHANNEL BLOCK Channel Status 59 HEADLN Block Press or v keypad or CH v to set channel MENU to exit PARENTAL CONTROLS 1 V Chip TV Rating Limit 2 V Chip Movie Rating Limit 3 V Chip Unrated Program
30. instructions below If you have trouble contact your cable company B The only way to successfully change channels for the picture that is coming from the channel on your VCR the VID channel is to press the channel buttons on the VCR or on the VCR s remote control REFERENCE 1 Connect as shown VCR 2 Turn on the TV and press MENU on the remote CABLE SPLITTER the TV MAIN MENU appears a ANTENNA IN VIDEO OUT AUDIO OUT rom Cable Line D lt 3 Select GUIDE Plus Menu press 7 on the remote icio control 4 Keep advancing through the screens until you come to the one that asks you if you have cable Select Yes CABLE BOX CABLE IN 5 The next screen asks you if you have a cable box press the arrow down button to highlight No Then press OK CARE AND CLEANING CAUTION Turn OFF your TV before cleaning You can clean the TV as required using a soft lint free cloth Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation The TV s screen may be cleaned with a soft lint free cloth as well Take care not to scratch or mar the screen If necessary you may use a cloth dampened with warm water Never use strong cleaning agents such as ammonia based cleaners or abrasive powder These types of cleaners will damage the TV While cleaning do not spray liquid directly on the screen or allow liquid to run down the screen and inside the TV Also
31. or special use the left arrow button to highlight the channel listing or promotional ME reee information box A oom FOX The Simpsons _ Friends E CBS CBS News Wheel of For Requesting more information about a particular show displays the 7 Extra q g p play PD e 9 DivorceCourt Power of Att PlusCode programming number and the Shows on Next for that channel EN B 3rd RockFrom Seinfeld m Sa ffs NewsHour Nightly Bus Press the INFO button to exit the expanded information screen Promotional Information PIP PICTURE IN PICTURE OPERATION The PIP picture in picture feature lets you display a second smaller picture on top of the main picture If the PIP window is displayed and you change the PIP input by pressing WHO INPUT to COMP2 PIP is not displayed If you press the PIP button while viewing COMP2 the PIP window is not available N A appears in the channel marker Important Your TV has a single tuner that tunes to cable or off air television channels In order for the second picture the PIP picture to appear on the screen you must connect another component like a satellite receiver or VCR to the TV You need to use audio video cables to connect the component to the TV Go to the Setup and Connections section for more information 50 FEATURES AND MENUS How to Use PIP While you can use PIP in different ways this basic PIP scenario should get you started While watching TV
32. 33 FEATURES AND MENUS Auto Channel Search Tells the TV to search automatically for all the channels available through the antenna input When the TV finds an active channel it places it in the channel list inactive channels weak stations or channels with no signal at all will be removed from the channel list If you are using a cable box and have setup your GUIDE Plus system this option will not appear List and Labels Displays a control panel that lets you custom build your Normal channel list and choose a six character label for each channel Follow the on screen directions to enter your channels and other information Channel Use the up and down arrows to scroll up and down through the channel scan list You can enter the channel number directly using the number buttons Normal List Only the channels included in the Normal list are available when you scan up and down using the CH buttons Use the up and down arrows to indicate whether the channel number indicated is included Yes or is not included No in the Normal channel list Channel Labels Use the up and down arrows to enter a six character label for each channel Hold the button down to scroll quickly through the characters Press RESET to clear a label The TV can store up to 27 labels in memory Auto Tuning Displays a choice list that lets you set up the TV to MAAN WENU automatically tune to the correct input channel when you press a component button VCR1
33. 5002 5003 5004 5005 5006 5007 5053 Antronix 5008 5009 Archer 5008 5009 5010 5011 Cabletenna Cableview Century Citizen Colour Voice Comtronics Eastern Garrard GC Electronics Gemini General Instrument Hitachi Hytex Jasco Jerrold 5003 5005 5007 5018 5023 5024 5046 5053 Magnavox Memorex Movie Time T NSC 5002 5027 5028 Oak 5002 5016 5029 Panasonic Paragon Philips 5011 5012 5013 5019 5025 5030 5031 5032 Pioneer Pulsar RCA Realistic Regal Regency Rembrandt Runco Samsung Scientific Atlanta Signal Signature SL Marx Sprucer Starcom Stargate Starquest Tandy Teleview Tocom Toshiba Tusa TV86 Unika United Artists United Cable Universal Videoway Viewstar 5015 5025 5027 5040 Zenith 5026 5050 5051 Satellite Receivers Chapparal General Instuments Panasonic Primestar PROSCAN Realistic Sony STSI STS2 STS3 STS4 Toshiba Uniden FEATURES AND MENUS USING THE TV This section explores the features and menus of your TV beginning with some information on using menus and control panels 1 SETUP AND CONNECTIONS Each menu is then outlined and special features are detailed in order to help you get the most from your TV INTERACTIVE SETUP This section als
34. 6 ft Screw on Cable attaches to the round antenna connectors called 75 ohm F type on the back of your VCR or TV The ends screw onto the connectors for a secure connection Push on Cable attaches to the round antenna connectors called 75 ohm F type on the back of your VCR or TV Ends push on for a quick connection Audio Video Cables Gold Tipped cable VH83 6 ft Gold Tipped cable AH84 6 ft VH976 6 ft VH913 12 ft Monaural VCR Dubbing Cable Double cable that lets you connect the video and audio jacks of two VHS VCRs to duplicate tapes Can also be used to connect a VCR to your TV Cable is color coded and shielded Has RCA type phono plugs on each end Stereo VCR Dubbing Cable Triple cable that lets you connect the vipeo and aupio jacks of stereo components S Video Cable has multi pin connectors on each end for connecting S Video components to your TV Remote Control This is the remote control that came Accessory Order Form packed with your TV Description Part No Price Qty Total Replacements or spares can Screw on antenna cable 3 ft VH81 3 95 be ordered as needed Screw on antenna cable 6 ft VH82 4 95 Push on antenna cable 6 ft VH89 5 95 Monaural VCR Dubbing Cable 6 ft VH83 5 95 Stereo VCR Dubbing Cable 6 ft VH84 9 95 SBISTBTAT S
35. After blocking movie ratings you must set NR to View separately to view NR movies Rating field Rating status field V CHIP MOVIE RATING LIMIT Rating Status eee BEN Press v to block programs with this rating Press MENU to exit STATUS Block Block View Block Block View View 41 42 FEATURES AND MENUS V CHIP UNRATED PROGRAM BLOCK Selecting this option lets you decide if programs that the V Chip recognizes as unrated can be viewed Note that unrated TV programs may include news sports political religious local and weather programs emergency bulletins public announcements and programs without ratings View All unrated programs are available Block All unrated programs are not available Don t forget to lock parental controls after you change the status of unrated program viewing If you do not the limit will not take effect CHANNEL BLOCK Selecting this option lets you decide what channels can be viewed View Makes the selected channel viewable Block The front panel and remote CH channel buttons will tune only to channels that you have marked as View You may tune to a blocked channel manually by using the number buttons and entering the correct password Don t forget to lock parental controls after you change the status of Channel Block If you do not the channel block will not take effect FRONT PANEL BLOCK Selecting this option lets you block disable or unblock enable the TV s
36. D player If you don t have a DVD player connected to the TV skip this step or select Not Connected from the DVD Channel choice list For more see Auto Tuning in the Features and Menus section SETUP Would you Like to use a DVD with your TV 2 Skip this step 1 Press MENU or OK to bring up the DVD choice list SET DVD CHANNEL 1 Not connected 2 Channel 3 3 Channel 4 4 Video 1 Input 5 Video 2 Input 2 Point to the choice that matches the way you have your DVD player connected to the TV If you used audio video cables choose the video input you connected the cables to 3 Press MENU or OK to continue 18 INTERACTIVE SETUP SETTING THE SAT CABLE CHANNEL AUTO TUNING The next step lets you set the SAT CABLE channel When you set the SAT CABLE channel you re telling the TV what channel to tune to when you press the SATeCABLE button on the remote Indicate which input you used to connect a satellite receiver or a cable box If you don t have a satellite receiver or cable box connected to the TV skip this step or select Not Connected from the SAT CABLE Channel choice list For more information see Auto Tuning in the Features and Menus section SETUP Would you Like to use a cable box or satellite unit with your TV 1 Use with cable or satellite 1 Press MENU or OK to bring up the SAT CABLE choice list SET SAT CABLE CHANNEL Not connected 2 Point to the choice that matches
37. Direct Entry 1 Turn on the component to be programmed 2 Look up the brand and code number s for the component on the code list on the last page of this section Using the Remote Press and hold the button on the remote you want to program 4 Enter the code from the code list Release button and then press ON OFF to see if the component responds to the remote commands If it doesn t try pressing the component button and then ON OFF again 6 If you get no response repeat these steps using the next code listed for your brand until the component responds to the remote commands USING THE REMOTE TO CONTROL A COMPONENT Once the remote has been programmed successfully you are ready to use it to control your components To operate the component 1 Press the component button VCR1 VCR2 AUX or SATeCABLE to set the remote to control the component 2 Press ONeOFF to turn the component ON or OFF 3 Use the remote buttons that apply to that component MODES OF OPERATION Because this universal remote can control several different components DVD player VCR Cable Box etc it uses operational modes triggered by the component buttons For example if you want the remote to control the TV you would press the TV button to put the remote into TV mode before you could control the TV 25 26 USING THE REMOTE VCR Admiral Adventura Asha Audio Dynamics Audiovox Bell amp Howell Beau
38. EXCLUSIVE REMEDY OF THE CONSUMER THOMSON MULTIMEDIA INC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE How State Law relates to warranty Some states do not allow the exclusion nor limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you also may have other rights that vary from state to state If you purchased your television unit outside the United States This warranty does not apply Contact your dealer for warranty information Service calls which do not involve defective materials or workmanship are not covered by this warranty Costs of such service calls are the sole responsibility of the purchaser 57 58 REFERENCE Accessory Information Antenna or cable TV connections are made with either coaxial antenna cable or twin lead cable Coaxial cables are shielded so they are less susceptible to hum or interference from adjacent cables
39. LE My card expires T cover ov T3 AUTHORIZED SIGNATURE Credit card order will not be processed without signature Print or type your name and address clearly A complete and correct order will save you days of waiting Daytime Phone Name l Street l l Apt l City l States Zip l l l Please make sure that both sides of this form have been filled out completely Allow 4 weeks for delivery All accessories are subject to availability Prices are subject to change 60 Placing an Order To place your order by phone have your Visa MasterCard or Discover Card ready and call the toll free number listed below Use this number only to place on order for accessory items listed on this order form 1 800 338 0376 To place your order by mail detach and mail the completed order form with credit card information money order or check in US currency made payable to Thomson multimedia Inc to the following address Video Accessories PO Box 8419 Ronks PA 17573 REFERENCE A Accessories 58 Advanced Connections 7 Convergence 33 Age Based Ratings 37 Audio Menu 29 Audio Output Volume amp Speakers 30 Audio Processor 29 Audio remote codes 26 Audio Video cables 5 Auto Channel Search 13 34 Auto Color 31 Auto Tuning 16 34 DVD Channel 18 34 SAT Cable Channel 19 34 VCR1 Channel 16 34 VCR2 Channel 17 34 B Back of the TV 7 Basic Connection 6 Basic
40. Lock Note that the content status fields corresponding to the unblocked Parental Controls for rating limits rating become View as well They and the age based rating status are to take effect the only fields that automatically change back to View when you complete this process Blocking Specific Content Themes Content Themes You can block programs based on their content Content is represented licit Dial by the D L S V and FV on your screen See the beginning of this section Sexually Explicit Dialogue for details When you block a content theme for a particular rating you Adult Language automatically block that content theme for higher rated programs as well s Sexual Situations For example if you do not want your child to watch programs that have f adult language L rated TV PG or higher then you could block out all programming TV PG and above containing adult language FV Fantasy Violence 39 FEATURES AND MENUS To block program content 1 Rating field 6 Determine the lowest level of content you do not want the child to watch Use the left and right arrows to highlight the Rating Field Use the up and down arrows on the remote to scroll through the age based ratings until the rating that corresponds with the lowest content you do not want the child to watch appears In the example above you would scroll through the ratings until the TV PG rating appeared Press the right arrow to move the h
41. Parental Controls GUIDE Plus Menu The setup routine is detailed earlier in the manual in the Interactive Setup section The first screen of the Interactive Setup appears automatically when you turn on your TV for the first time or after a power outage oBJrouruns You can also access the Interactive Setup from the Main Menu SETUP Would you Like to begin Setup now 1 Begin setup now 2 Cancel setup 35 36 FEATURES AND MENUS PARENTAL CONTROLS AND V CHIP The Parental Controls menu allows you to program your TV so that children cannot see certain programs channels or use the front panel controls The first three choices in the Parental Controls menu involve software inside your TV dubbed V Chip which allows you to block TV programs and movies based on violence sex or other content you may believe children should not view In other words it lets you program your TV so it will not display certain programs Once you block programs you or other adults can unblock programs by entering a password The software inside your TV comes turned off so if you choose not to implement it you can just ignore it HOW V CHIP WORKS When turned on the software reads a code that most broadcasters send with programs That code tells the software the program s age based rating TV MA TV 14 etc and content themes Violence V Adult Language L etc If you have blocked the rating and or content themes that th
42. SERVICES RELATING TO THE GUIDE PLUS SYSTEM TABLE OF CONTENTS SETUP AND CONNECTIONS eese nennen 3 Step 1 Uripack the TV nce tete d eee a dti 4 Step 2 Connect Your TV iassosse iaia enne nnns 4 Basic PIP Coninectlon iiec eee ient e Eri 5 The Basic Connection Pip Not Available 6 Advanced Connections cccceecccececeeeeeeeeeeeeaeeeeaaaeeeeeeeeeaeeeseneees 7 Step 3 Connect the G LINK Cable ssessseees 9 How to Find the Remote Control Sensor 9 Step 4 Plug in theTM initi rene t fer a A rper prts 10 Step 5 Place Batteries in the Remote sssseeesss 10 Step 6 Turn on the TV sssssssssssssseeeeennenen nnne 10 On Screen Program Guide sssssseeee 10 Step 7 Program the TV iiinn na i nnne 10 INTERACTIVE SETUP crece idc ese eter dd 11 Using Point and Select ssesssssssseeeeeeeenreennene 12 Entering Setup inerenti eet eddie eda 12 Selecta Language x Eta etat 13 Auto Channel Search ssssssssssseeeeeennenen nens 13 The GUIDE Plus System sessssseseseeeeeeeeeenneenn nennen 14 Setting Up the GUIDE Plus System eeeeee 14 Setting the Time essssssssssesseeeeeee ener nnne 16 Setting the VCR1 Channel auto tuning sese 16 Setting the VCR2 Channel auto tu
43. T In TV mode press to toggle through the available input sources VID1 SVID1 VID2 COMP2 and previous channel In SAT mode press to select available channel lists for RCA GE and Proscan satellite receivers 23 USING THE REMOTE 24 ACCESSING THE VIDEO INPUT Use the WHOseINPUT button to scroll through the available input channels and view components you have connected to the TV 1 Press TV to place the remote in TV mode Make sure that the component you want to view is turned ON 2 Press WHO INPUT to tune to an available input channel 3 Continue to press the WHO INPUT button to scroll through the channels PROGRAMMING THE REMOTE The universal remote can be programmed to control most brands of remote controllable VCRs satellite receivers and cable boxes The remote is already programmed to control most RCA GE and Proscan TVs VCRs DVD players laserdisc players and satellite receivers TESTING THE REMOTE To determine whether the universal remote needs to be programmed turn a component ON such as a VCR point the remote at the VCR and press the VCR1 button Then press POWER or CH channel up or CH v channel down to see if the VCR responds to the remote commands If not the remote needs to be programmed USING AUTOMATIC CODE SEARCH The following instructions can be used to program the remote to control each of the components connected to your TV If you want to exit the automatic code search without p
44. USER S GUIDE Qatt IMPORTANT INFORMATION WARNING CAUTION Caution To reduce the risk of electric shock do RISK OF ELECTRIC Ot remove cover or back No user serviceable To reduce the risk of fire or I n D arts inside Refer servicing to qualified service electric shock do not expose SHOCK DO NOT OFEN ennel g to q this product to rain or moisture This symbol indicates This symbol indicates dangerous voltage inside important instructions the product that presents a accompanying the product risk of electric shock or personal injury Caution To prevent electric shock match wide blade of plug to wide slot fully insert Attention Pour viter les chocs lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusq au fond Refer to the identification rating label located on the back panel of your product for its proper operating voltage FCC Regulations state that unauthorized changes or modifications to this equipment may void the user s authority to operate it Caution Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube or projection TV picture tubes ALSO some network program logos phone numbers etc may cause similar damage This damage is not covered by your warranty Cable TV Installer This reminder is provided to call your attention to A
45. V to put the remote control into TV mode then press WHOse INPUT to scroll through the video input channels until you tune to VID1 or SVID 1 input To watch the VCR in this connection press TV to put the remote control into TV mode then press WHOeINPUT to scroll through the video input channels until you tune to VID2 or COMP2 if connected to Y P P input In the nteractive Setup you can program the TV to automatically tune to the correct input channel when you press the component button on the remote How to View Your Components To watch the Satellite Receiver in this connection press TV to put the remote control into TV mode then press WHOs INPUT to scroll through the video input channels until you tune to VID1 or SVID 1 input To watch the VCR in this connection tune to Channel 3 or 4 To watch the DVD player in this connection press TV to put the remote control into TV mode then press WHOe INPUT to scroll through the video input channels until you tune to VID2 or COMP2 if connected to Y P4 P input In the nteractive Setup you can program the TV to automatically tune to the correct input channel when you press the component button on the remote SETUP AND CONNECTIONS STEP 3 CONNECT THE G LINK CABLE The G LINK cable enables the GUIDE Plus System the on screen guide that lists what shows are on TV to work with your VCR and or cable box Cable Box If your TV is connected to a cable box and you
46. ain the microprocessor inside the remote Release number 1 replace the batteries and if necessary reprogram the remote Guide comes on when I turn on TV e The Guide automatically comes up when you use the TV button on the remote to turn on the TV You can turn off this feature by pressing GUIDE on your remote control and then press MENU to select the Menu bar Press the right arrow to select Setup Choose Review Options and then select OFF Turns off while playing e Schedule off function may have been activated e Electronic protection circuit may have been activated because of a power surge Wait 30 seconds and then turn on again If this happens frequently the voltage in your house may be abnormally high or low e Unplug Wait five minutes Plug in again TV turns on unexpectedly e Scheduled On or Watch from the Guide may have been activated Blank screen e Maybe the component connected to the input jacks is not turned on e Try another channel e Press RESET in case the picture controls are set too low No sound picture okay e Maybe sound is muted Try pressing volume up button to restore sound e Maybe speakers are turned off Check the Audio Output and Speakers control panel in the Audio menu e If using an S VHS component remember to also connect the component s L and R AUDIO OUT jacks to the TV s L and R INPUT jacks Can t select certain channel e Channel may be blocked or not approved in the Parental Controls menu
47. arents may find unsuitable for younger children Many parents may want to watch it with their younger children The program contains a one or more of the following content themes some suggestive dialogue D infrequent coarse language L some sexual situations S or moderate violence V TV TV General Audience Most parents would find this program suitable for all ages It contains little or D no sexual dialogue D no strong language L little or no sexual situations S or violence V Directed to Children 7 years and older Designed for children ages 7 and above It may be more TV appropriate for children who have acquired the developmental skills needed to distinguish between make believe and reality Themes and elements in this program may include mild fantasy violence 14 PG G Y7 FV or comedic violence or may frighten children under the age of 7 Y All Children Themes and elements in this program are designed for a young audience including TS children from ages 2 6 It is not expected to frighten younger children V CHIP TV RATING LIMIT PARENTAL CONTROLS The V Chip TV Rating Limit lets you decide what TV programs can and V CHIP TV RAT ING LIMIT cannot be viewed Rating Status pL S V FV To set TV programming limits Press v to select rating 1 Choose Parental Controls from the Main menu If Parental Controls Press MENU to exit NE have previously been locked you must enter your password If they are per Pe V
48. choices available The system then searches for the correct code to control Tune your cable box to channel 02 Select your cable box brand Re Susan your your cable box When your cable box from the list below switches to channel 9 it has located the ncn D Ms correct code Press up down to change brand Then press OK Press up down to choose Then press OK 14 INTERACTIVE SETUP Select Yes if the cable box changed to channel 9 or No if it did not If you select No the system will try another code If the GUIDE Plus System cannot recognize either your cable box or VCR after several tries a screen stating Cable Box VCR test failed Please consult your manual and try again appears You have a choice to either Try Again or Skip Cable Box Setup If you get this message you should also e Double check the brand of your cable box or VCR and try entering it again e Check to make sure the G LINK wands are positioned correctly See the Setup and Connections section of this manual for more details If you choose to skip the cable box or VCR setup some features of the guide may not be available until you successfully complete this procedure Once the correct model of cable box has been identified you need to set the cable box s output channel Enter the channel you use to view channels through your cable box usually 3 or 4 Consult your cable box s instruction book or your cable company if you are not
49. ds the same program each day Monday through Friday Messages Action Buttons Messages Sor News Schedule E pier GUIDE Plus ID Number Selection Tonight 10 9 pm CBS FEATURES AND MENUS Messages Menu Action Button When viewing the Messages menu the following Action button will appear on the bar 1 Remove 29 3 e Remove Highlight the message you wish to delete and press 1 on the remote CHANNELS You may customize the channel listing by enabling or disabling the display of certain channels For instance you may disable channels that you never watch You can restore disabled channels at a later point in time 1 Press GUIDE to bring up the GUIDE Plus system 2 Press MENU to highlight the Menu bar 3 Use the right and left arrows to highlight the Channels menu selection 4 Use the up and down arrows to select a channel Then use the Channels Menu Action Buttons as described in the next section Channels Menu Action Buttons While browsing the Channels menu the following Action buttons are available on the bar 1 Cancel 2 Change 3 On Off e Cancel Press 1 on the remote to cancel any changes made since entering the Editor Menu e Change Press 2 on the remote to change the channel number for the highlighted channel line e On Off Press 3 on the remote to toggle the state of the channel between On and Off Channels Menu Action Buttons 1 Cancel 2 Change3 On Off ame t
50. e TV button on the remote to turn on the TV after you have set up the GUIDE Plus system For more information see GUIDE Plus system on page 43 To get out of the Guide e Press OK to exit the Guide and tune to the highlighted channel e Press GUIDE to exit the Guide and tune to the channel displayed in the View window e Press CLEAR to exit the Guide and go to the last channel you were watching STEP 7 PROGRAM THE TV Proceed to the next section nteractive Setup The interactive setup routine walks you through the steps needed to fully configure the TV The first steps ask you to select your preferred language for the menu system and to begin the auto channel search which puts available cable TV or antenna signals into the TV s memory VCR1 ON OFF DVD VCR2 AUX SAT CABLE ASAA Picture Quality If the picture appears to have a double or triple image or if you notice rings or halos around objects you may have to adjust the color convergence Details can be found under the Screen menu heading in the Features and Menus section of this manual INTERACTIVE SETUP THERE S AN ON SCREEN SETUP ROUTINE The interactive setup routine takes you through the steps needed to configure the TV Select a menu language Search for available channels Set up the GUIDE Plus System Set the time Set the VCR1 channel Set the VCR2 channel Set the DVD channel Set the SAT CABLE channel Make the channel list and labels
51. e program contains you will receive the message This channel is not approved for viewing when you turn to that particular channel Broadcasters are not required to provide content themes so programs received with no content themes will only be blocked if you block their age based rating You can also block out programs that have been given a rating of Not Rated and programs that are considered unrated because no code has been sent by the broadcaster The TV age based ratings and content themes you can block are listed in the following table 6 Parental Controls 1 V Chip TV Rating Limit FEATURES AND MENUS a Description and Content Themes for Age Based Ratings TV MA Mature Audience Only Specifically designed to be viewed by adults and may be unsuitable for children under 17 It contains one or more of the following content themes crude indecent language L explicit sexual activity S or graphic violence V Parents Strongly Cautioned Contains some material that many parents would find unsuitable for children under 14 Parents are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the age of 14 watch unattended This program contains one or more of the following content themes intensely suggestive dialogue D strong coarse language L intense sexual situations S or intense violence V Parental Guidance Suggested Contains material that p
52. e receiver to your TV with audio video cables If you use a cable box you may need extra equipment e Swap won t work Make sure the remote is in the right mode For example once you turn on the VCR with the VCR1 button you can t NO oo VIDEO RAUDIOL SWAP the pictures until you put the remote in TV mode Just press the TV button e No signal or bad reception Most VCRs and satellite receivers have an antenna or TV VCR button Press the antenna or TV VCR button on the front of the component Note If you programmed the Universal remote control to operate your VCR the ANTENNA button on the remote acts as a TV VCR button e Every time you change channels the same channel appears in both windows the main picture and the PIP picture A Press the CH CTRL button on the remote until the TV picture channel number is highlighted The channel buttons on your remote control won t work correctly for PIP when the VID channel is highlighted You must use audio video cables to connect your VCR to your TV in order for PIP to work This example shows the connection for VID1 the VCR is connected to the INPUT 1 If you use a cable box you must connect a splitter in order for PIP connection If you want to use VID2 picture in picture to work You must also check some settings in your connect the VCR to the INPUT 2 connection TV s menu system in order for all of the GUIDE Plus system features to on the back of your TV work Please follow the
53. ed it will automatically tune to that channel Grid Guide Action Buttons 6 36pm 1 Watch 2 GoTo 3 re lt ELT ET Portscenten momoe OT TIC day sports 53 with Linda Cohn and John Anderson Grid Guide Menu Selection The Simpsons Friends CBS News Wheel of For Extra Power of Att 3rd Rock From Seinfeld 4NewsHour Nightly Bus Home Solutio Harry London The PIP button on the remote also toggles the video window between locked and unlocked states 45 46 FEATURES AND MENUS SORT The Sort menu lets you browse programs by category The channel to which you are currently tuned is displayed in the video window To Sort 1 If the GUIDE Plus system isn t on your screen press GUIDE on your remote control 2 Press MENU on the remote to select the Menu bar 3 Usethe arrows to highlight Sort When Sort is highlighted for the first time the Movies category is displayed Thereafter the last category used becomes the default A listing of subcategories is displayed below the category name Use the left and right arrows to highlight other categories 4 Usethe up and down arrow buttons to highlight a subcategory For example highlight A and press OK the GUIDE Plus system sorts the programs 5 Press the up and down arrow buttons to review the list one program at a time Press the channel up and down to review the list one page at a time 6 Select MENU to return to the men
54. ee Parental Controls in the Features and Menus section REFERENCE LIMITED WARRANTY What your warranty covers Defects in materials or workmanship For how long after your purchase One year from date of purchase for labor charges One year from date of purchase for parts Two years from date of purchase for picture tubes The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm whichever comes first What we will do Pay any Authorized RCA Television Service Center the labor charges to repair your television Pay any Authorized RCA Television Service Center for the new or at our option refurbished replacement parts and picture tubes required to repair your television How you get service Request home or pick up repair and return service from any Authorized RCA Television Service Center provided that your television is located within the geographic territory covered by an Authorized RCA Television Service Center If not you must take your television to the Service Center location at your own expense or pay for the cost the Service Center may charge to transport your television to and from your home To identify your nearest Authorized RCA Television Service Center ask your dealer look in the Yellow Pages or call 1 800 336 1900 Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty p
55. eennnenene nnns 33 Channel Menu uitiis tet ep ter m en a ed i repite 33 Time MenU RRRRRRRRRRRRRRRRRRRRRRRRRRRRRREMM 35 Setup Meri 5 nnt ici e E E ete EA a ROAS et 35 Parental Controls and V Chip eesssseeeeeeenee 36 How V Chip works ssssssseseseeeeeennnee nennen 36 V Chip TV Rating Limit sseseseeeeeeeeennneeenenn nnne 37 V Chip Movie Rating Limit eeseeseeeeeeeeneeennnene 41 V Chip Unrated Program Block ssseeeees 42 Channel Block trna ret mde avra e eus a aoai 42 Front Panel Block ccccccccccccceceeeeeeeeeeeeeeeeesaeseaeeeeeeeeeessseeseees 42 Lock Unlock Parental Controls eeeeeeeeeennn 42 About the GUIDE Plus System sesseeeeennnneee 43 Downloading Data sse nennen 43 GIG GUIS sak x caccal cssicvnien E E E E 44 folam TENE IEEE 46 M2 eR ETT IERI 47 Schedule 3 nd rere Er TE Eo ele eei ood 47 WIESSAGES 48 Channels E E rain eee ik va uan ka ER vano E cr OB a bains 49 Setup aci pn Heic es vp ee eee p fo 50 How to Get More Information About an Advertisement ora Programmen le 50 PIP Picture in Picture Operation eeeseeeeenennee 50 Channel Marker seeeeeeseeseseeeeeenenennnnennnnnnnnnnnnnnnnnn nnne 52 GUIDE Plus Menu Items ccccccceceeeesseeeecceaneeseeeeeeseesseseeeeeeees 52 REFERENCE
56. en and the Block B settings are coded in red Content Status Blocking Age Based Ratings Rating status fiela You can automatically block all program ratings above a specified age V CHIP TV RATING LIMIT based rating level For example if you only want your child to watch Rating MESI ESSO T d TV PG l programs that have a TV G rating and lower in other words you want field Blgck RENE status n E s Li Press v to view programs with the child to watch TV G TV Y7 and TV Y then you need to block out E Eres REM CO EROS fields other programming with higher ratings RATING STATUS DLS V FV TV MA Block To block programs with higher ratings TV 14 Block B TV PG Block B 1 First determine the lowest level rating you do not want the child to EE or watch TV Y View 2 Usethe left and right arrows to highlight the Rating Field 3 Use the up and down arrows on the remote to scroll through the When you change the status of a age based rating limits Keep scrolling until the rating corresponding rating to Block the system will with the lowest rating you do not want the child to watch appears automatically block higher ratings and all corresponding content themes 38 FEATURES AND MENUS In the example discussed previously you would scroll through the rating field until TV PG appears since the highest rating you want the child to watch is TV G Hierarchy of Age Based Ratings 6 Mature Audience Only
57. ent theme you want to change to View appears Press the right arrow to move the yellow highlight to a particular content theme status such as the B under language L corresponding with TV 14 Press the up or down arrows to change its status back to V Your child would then be able to watch programs with TV 14 adult language content but not programs with TV PG or TV MA language content Pressing RESET on the remote will reset all ratings to View and V Note that only the content theme status corresponding to TV 14 language L changes to View V Higher rated content themes such as that for TV MA language do not change FEATURES AND MENUS V CHIP MOVIE RATING LIMIT You set movie rating limits by blocking movies rated above a specified level Blocking Movie Ratings If you only want your child to watch movies that have a PG rating and lower in other words movies rated PG and G then you could automatically block out all other movies with higher ratings To block movies 1 Highlight the rating field and press the up and down arrows to find the rating that is the lowest rating you do not want the child to watch In the example above you would point to the rating status button corresponding to PG 13 since the highest rating you want the child to watch is PG Use the right arrow to highlight the rating status field Press the up and down arrows to change the button from View to Block All higher rating
58. eo 1 Input 5 Video 2 Input 2 Point to the choice that matches the way you have your VCR connected to the TV If you used audio video cables choose the video input you connected the cables to 3 Press MENU or OK to continue SETTING THE VCR2 CHANNEL AUTO TUNING The next step lets you set the VCR2 channel When you set the VCR2 channel you re telling the TV what channel to tune to when you press the VCR2 button on the remote Indicate which input you used to connect a second VCR If you don t have a second VCR component connected to the TV skip this step or select Not Connected from the VCR2 Channel choice list For more information see Auto Tuning in the Features and Menus section SETUP Would you Like to use a second VCR with your TV 1 Use TV with VCR 2 2 Skip this step 1 Press MENU or OK to bring up the VCR2 choice list 17 INTERACTIVE SETUP SET VCR2 CHANNEL 1 Not connected 2 Channel 3 3 Channel 4 4 Video 1 Input 5 Video 2 Input 2 Point to the choice that matches the way you have your second VCR connected to the TV If you used audio video cables choose the video input you connected the cables to 3 Press MENU or OK to continue SETTING THE DVD CHANNEL AUTO TUNING The next step lets you set the DVD channel When you set the DVD channel you re telling the TV what channel to tune to when you press the DVD button on the remote Indicate which input you used to connect a DV
59. eriod must be presented to obtain warranty service For rental firms proof of first rental is also required What your warranty does not cover Customer instruction Your Owner s Manual describes how to install adjust and operate your television Any additional information should be obtained from your dealer Installation and related adjustments Signal reception problems not caused by your television Damage from misuse or neglect Batteries Images burnt onto the screen A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes A television purchased or serviced outside the U S A Acts of nature such as but not limited to lightning damage Product Registration Please complete and mail the Product Registration Card packed with your television It will make it easier to contact you should it ever be necessary The return of the card is not required for warranty coverage REFERENCE Limitation of Warranty THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED NO VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA INC ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
60. etters listed in your newspaper s TV section for ideas on labeling the channels Repeat this process for each of your channels Then press MENU or OK to continue The TV can store up to 27 labels in memory Use the CH channel up or CH v channel down buttons to change channels in the Channel field This works even if you re not in the Channel field Or enter the channel number directly using the number buttons on the universal remote To enter a number greater than 99 press and hold 1 to enter the hundreds digit then press the two remaining numbers The List and Labels feature can also be accessed from the Channel menu Because this procedure can be time consuming feel free to skip this step and come back to it later USING THE REMOTE HOW TO USE YOUR UNIVERSAL REMOTE This section defines the buttons of the remote and how to program it to control other components 1 SETUP AND CONNECTIONS The universal remote can be programmed to control most brands of remote controllable VCRs satellite receivers and cable boxes If you have a RCA GE or Proscan component you probably don t need to program it at all INTERACTIVE SETUP 3 USING THE REMOTE FEATURES AND MENUS 5 REFERENCE N lt lt lt lt Modes of Operation Because this universal remote can control several different components DVD player VCR Cable Box etc it uses operational modes triggered by the component buttons F
61. he Safety Tips sheet packed with your TV Cautions Position cables to Avoid Audio Hum or Interference e Insert all cables firmly into jacks e Place the audio video cables to the sides of the TV s back panel instead of straight down the middle e Try not to coil any twin lead cables and keep them away from the audio video cables Protect your components from Overheating e Do not block ventilation holes in any of the components Arrange the components so that air can circulate freely e Do not stack components e Allow adequate ventilation when placing your components in a stand e Place an amplifier on the top shelf of the stand so heated air rising from it will not flow around other components SETUP AND CONNECTIONS BASIC PIP CONNECTION Cables You will use the following cable to make your connection Coaxial Cables Carries the signal from the I antenna or cable directly to the television or through a cable box as needed by your cable system 1 j gt Audio Video Cables Carries sound and video from the component to the TV S Video Cable Carries video from an S Video capable component which provides best picture quality TV and Stereo VCR CABLE CABLE BOX OR ANTENNA How to View Your VCR To watch the VCR in this connection press TV to put the remote control into TV mode then press WHO INPUT to scroll through the video input channels until you tune to VID1 input
62. ighlight to the field corresponding with the content theme you wish to block Press the up or down arrow to change content status from V to B All higher ratings content theme will automatically change to B Rating status field V CHIP TV RATING LIMIT Le M Content themes re AE dez TE Content status fields Press v to block programs with this content for this rating RATING STATUS DLS V FV TV MA View TV 14 View TV PG View TV G View TV Y7 View TV Y View V V Press MENU or OK to return to the menu or exit the screen Viewing Specific Content Themes If you block specific content themes you have the option of going back and 1 2 3 40 Broadcasters are not required to provide content themes or age based ratings Programs received with no content themes will only be blocked if you block their age based rating You must remember to Lock Parental Controls for rating limits to take effect Rating status field changing some of the content themes back to View V Content themes Determine the content themes you want to change to View V Rating field Use the left and right arrows to highlight the Rating Field Press v to block programs with Content this content for this rating status Use the up and down arrows to scroll through the age based RATING STATUS DLS V FV fields TV MA View TV 14 View V TV PG View V TV G View TV Y7 View TV Y View ratings until the rating whose cont
63. ill turn on the TV and tune to the correct channel FORWARD If you re operating a VCR or DVD Player with the remote control press FORWARD to advance a disc or videotape GO BACK Returns you to the previous channel GUIDE Brings up GUIDE Plus system press again to exit REVERSE PLAY FORWARD INFO Press to get more information about a program channel or C 3 pM ex 131 advertisement REC VCR STOP PAUSE L E D The little light below the ONeOFF button that lights when you CO CO Qu are programming the remote It also lights when you press an invalid PIP SWAP CH CTRL RESET button on the remote _ _ L MENU Brings up the Main menu and selects highlighted items When in VCR mode it functions as a PROGRAM button MUTE Reduces the TV s volume to its minimum level Press again to restore the volume OK When in the menu system selects highlighted items or returns you to the previous menu ONeOFF When in TV mode turns TV on and off If in another mode VCR DVD Satellite etc and programmed will turn the component on and off When pressed twice within two seconds all components that are on will be turned off this feature only works with most RCA GE and Proscan products USING THE REMOTE PAUSE f you re operating a VCR or DVD Player with the remote control press PAUSE when the disc or videotape is playing to pause playback PIP Picture In Picture Brings up the small picture in picture window
64. in the G LINK jack you must remove it before you connect the G LINK cable If there is no demo pin just insert the G LINK cable into the G LINK jack Placing the Wands Under the VCR and or Cable Box Place the wands of the G LINK cable underneath your VCR and or cable box Place them about one inch away from the remote control sensor If you don t have a VCR just coil the cable of the extra G LINK wand with a twist tie and leave it behind the TV If you don t have a cable box just coil the cable of the extra G LINK wand with a twist tie and leave it behind the TV Connect to G LINK jack on the back of the TV 10 SETUP AND CONNECTIONS STEP 4 PLUG IN THE TV Plug the end into the wall outlet matching the wide blade of the plug with the wide slot in the outlet Be sure to insert the plug completely STEP 5 PLACE BATTERIES IN THE REMOTE e Remove the battery compartment cover from the back of the remote e Insert fresh batteries Make sure that the polarities and are aligned correctly e Replace the cover STEP 6 TURN ON THE TV Press TV on the remote or press POWER on the TV itself Pressing the TV button not only turns on the TV but puts the remote into TV mode so that the buttons on the remote will control TV functions ON SCREEN PROGRAM GUIDE The TV is designed to bring up the GUIDE Plus on screen program guide when you use th
65. in the channel listing of the Grid guide Press OK again to tune to the highlighted channel If the video window is unlocked it will automatically tune to the channel e Record Press 3 on the remote to place a timer in the Schedule for the VCR to record the program highlighted in the channel listing If you have a cable box changing channels on the TV will not cause the cable box channel to change while recording Record will only appear if you have set up the GUIDE Plus system and specified your VCR type The program information window will display a confirmation when you have successfully scheduled a program to watch or record Note If you have selected two programs to watch or record which begin at the same time or overlap you will receive a timer conflict message You must choose between the two programs When highlighting the Channel names the left column on the channel listing the following Action buttons appear 1 Block 2G TmT 30 e Lock Unlock Press 1 to lock or unlock the video window to either stay at one channel as you browse the GUIDE Plus system lock or change as you browse through different channels unlock e GoTo Press 2 on the remote to bring up the direct dial box and enter the number of the channel you want Press OK to highlight the channel and current program in the channel listing of the Grid Guide If the video window is locked press OK to tune to the highlighted channel If the video window is unlock
66. io Output amp Speakers Displays a choice list that lets you turn the TV s internal speakers on or off and set the audio outputs to fixed level or variable control level Variable Output Speakers On This setting turns the TV s speakers on and allows variable output from the TV s audio output jacks Variable Output Speakers Off This setting turns the TV s speakers off and allows variable output from the TV s audio output jacks Fixed Output Speakers Off This setting turns the TV s speakers off and allows fixed output from the TV s audio output jacks to an external device such as a surround sound amplifier With Fixed Output On the TV s volume control tone controls and mute are disabled USING THE REMOTE TO SELECT AN AUDIO PROCESSOR You can change the audio processor from the Audio menu as illustrated above or by pressing the SOUND button on the remote To make a selection using the remote 1 Press SOUND to display the audio processor choice list 2 Point to and select a different audio processor or press CLEAR to exit PICTURE QUALITY MENU Basic Picture Controls Displays the five slider controls for adjusting the way the picture looks Contrast Adjusts the difference between the light and dark areas of the picture Color Adjusts the richness of the color Tint Adjusts the balance between the red and green levels Black Level Adjusts the brightness of the picture Sharpness Adjusts the crispness of edges in the picture
67. istings and control your cable box and VCR menus by pressing menu on the remote and selecting You can either press MENU or OK to bring up the GUIDE Plus initial menu or GUIDE Plus Menu point to Skip this Step to move to the next step in the Interactive Setup SETUP This TV has GUIDE Plus the new on screen program guide with one button VCR recording 1 Set up GUIDE Plus What would you like to do Setup View Demo Options v Exit Press up down to choose Then press OK SETTING UP THE GUIDE Plus SYSTEM To complete the GUIDE Plus setup the G LINK wands must be properly aligned with your cable box and VCR if you have them Refer to the Setup and Connections section for additional information Select your Country and enter your ZIP or Postal code Where do you live Emer me Zp code where your TV v USA Canada DEM E Pi id hoo Upidown to change left right to move iic alia te 0 The next series of screens asks you about your cable TV setup If you have a cable box you need to set the GUIDE Plus System to control it Otherwise it may not be able to locate and download program Do you have cable Do you have a cable box information v Yes v Yes No No mm D T 3e Press up down to choose Then press OK Press up down to choose Then press OK select the brand of your cable box from Tune your cable box to Channel 2 and then pese the
68. l skip SKIP timer GUIDE Plus MENU ITEMS The GUIDE Plus Menu gives you access to features in the GUIDE Plus system To access the GUIDE Plus Menu 1 Press MENU on the remote 2 Highlight GUIDE Plus Menu and press OK Each menu and the sub menus are listed below GUIDE Plus Setup Displays STEP 4 Confirming Your Settings screen of the GUIDE Plus system setup Yes everything is correct Confirms the settings you completed in the GUIDE Plus system setup are correct Yes but my channel lineup is incorrect Displays STEP 5 Choosing Your Channel Lineup screen allowing you to change your lineup if it is incorrect No repeat setup process Begins the GUIDE Plus system setup GUIDE Plus Label Displays the GUIDE Plus label menu On Displays the station name when you change channels Off The station name isn t displayed when you change channels Continuous Demo Runs the GUIDE Plus system demonstration until it is turned off To turn off the demonstration you must turn off the TV Note If you have not completed your GUIDE Plus system setup these options will not be available A screen will prompt you to complete your setup 12 01 CC VCR1 VIDI Mute SAP PIP 59 Sample displays on a Channel Marker 7 GUIDE Plus Menu 1 GUIDE Plus Setup REFERENCE TROUBLESHOOTING Troubles sometimes are caused by simple faults that you can correct without the help of a service technician If y
69. mark Broksonic Calix Candle 2013 2014 2015 2016 2017 2018 2019 2021 2022 2114 2020 2110 Craig 2000 2002 2009 201 3 201 6 2018 ERES 2021 2022 2024 2115 Dimensia Dynatech Electrohome Electrophonic Emerson s B i 2026 2029 2030 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2044 2045 2047 2065 ARAT AEE 2105 2113 2116 2117 2130 Fisher 201 1 2023 2048 2049 2050 2051 2052 21 18 Fuji Funai i Garrard aiaiai aa O E R 2026 Harley Davidson Harman Kardon Harwood Headquarter Hitachi 2002 2055 2056 2057 2107 2111 2120 2122 Instant Replay MGN Technology Midland Minolta 2055 2056 2107 Mitsubishi 2029 2055 2056 2065 2066 2067 2069 ends 2070 2071 2072 2073 2074 2106 2113 2123 Montgomery Ward 2075 2131 Motorola 2021 2131 2002 2013 2026 Multitech 2002 2013 2016 2026 2053 2061 NEC 2009 2010 2011 2016 2018 2058 2064 2076 NT 2078 2079 2111 2123 Olympus Optimus Optonica Orion Panasonic 2021 2022 2109 2125 2126 2127 2016 2055 2056 2107 2120 Pentex Research Philco 2021 2022 2062 2063 Philips 2021 2062 2096 2124 Pilotos dte ERN ERA E 2014 Pioneer 2010 2055 2080 2081 2123 Portland 2016 2017 2019 2110 PROSCAN Protec Pulsar Quarter Quartz Quasar 2000
70. minutes 2 Press the MENU button on the remote 3 Press 3 to select the Screen option 4 Press4to select the Adjust Projection TV option 5 Press 1 to align Green Centering Use the arrow buttons to center green square on screen Press MENU when done 6 Press 2 to align Blue Convergence Use the arrow buttons to align blue crosshatch to green crosshatch Press MENU when done 7 Press3 to align Red Convergence Use arrow buttons to align red crosshatch to green crosshatch Press MENU when done 8 If you want to make finer color adjustments press 4 to select Advanced Convergence explained next or press 0 to exit CLOSED CAPTION MODE 1 cc1 If you are unsure of the differences among the modes you may prefer to leave the closed captioned mode set to CC1 which displays complete text of the program in the primary language in your area MAIN MENU SCREEN 4 Adjust Projection TV FEATURES AND MENUS Advanced Convergence After you have adjusted the color projection tubes as described previously you can make finer adjustments to specific areas of the screen using the Advanced Convergence feature described below Note Before you use the advanced convergence feature you must sss complete the previous steps to align the tubes 1 Press the MENU button on the remote 2 Press3 to select the Screen option 3 Press4to select the Adjust Projection TV option 4 Press4to select the Advanced Convergence op
71. ning eseseeeees 17 Setting the DVD Channel auto tuning sese 18 Setting the SAT CABLE Channel auto tuning 19 Labeling the Channels sesesssseeeeeneeen 20 USING THE REMOTE eneeri eet 21 Remote Buttons essssssssseseee eene nennen nennen nenne 22 Accessing the Video Input ssesssseeeeeeennee 24 Programming the Remote ssesssssseseeeneeenennennes 24 Testing the Remote sssssessssssseeeeennneeeenne nennen 24 Using Automatic Code Search sssssssseesess 24 Using the Remote to Control a Component 25 Modes of Operation cccccccsccssscsssseecsseeeeeseeeseeeeesseeessnseeeses 25 FEATURES AND MENUS eeeseeeeeeeeeeeeernnenn nnn nennt nnne nnn 27 Menus and Control Panels essssseseeeeeet 28 MIL E 28 TABLE OF CONTENTS A di MOU EE EN E E EE PEE EEA TETT 29 Using the Remote to Select an Audio Processor 30 Picture Quality Menu sesssssesesseeeeeeeenne entren nnne nnne nns 30 Sereen MENU eere eere perra cede rave ree E Ps eR Fart cue esee vea 31 Using Closed Captioning esses 31 Adjusting the Color Projection Tubes sssssss 32 Advanced Convergence ssesesesesseeee
72. o includes information on using your GUIDE Plus system 3 USING THE REMOTE FEATURES AND MENUS 5 REFERENCE Y Y Y Y 2 N FEATURES AND MENUS MENUS AND CONTROL PANELS Using the buttons on both the remote and front panel enable you to access and make changes to the Menus and Control Panels Menus use the point and select rule to navigate but control panels use a variety of methods to adjust features on your TV The following pages detail how to use these controls in order to customize the functions of your TV MENUS MAIN MENU The first menu is called the Main menu Press MENU on the remote or on the front panel to bring up the Main menu Menus take you to another menu or a control panel There are two ways to select a choice in a menu e Point with the arrow buttons and then select with MENU or OK e Press a number button on the remote For example in the Main menu press 3 to go straight to the Screen menu Exiting a menu Feel free to explore the menu system If There are three ways to exit a menu you re ever unsure where you ate in the menu system or you re just plain tired of e Point to Exit and press MENU or OK exploring press CLEAR to remove the menus from the screen and start over e Press 0 on the remote again e Press CLEAR The on screen displays are cleared from the screen and you are returned to TV viewing CONTROL PANELS Control Panels allow you to adjust the default settings
73. ograms and download program information Press up down to choose Then press OK 15 16 INTERACTIVE SETUP SETTING THE TIME The next step in the Interactive Setup lets you set the time of day If your GUIDE Plus System has not completed its first download you need to set the time Once the system has completed its first download it sets the time for you automatically and you may not see this screen SETUP Would you Like to set the time on the TV 1 Press MENU or OK to bring up the SET TIME control panel SET TIME 2 Usethe left and right arrows to point to the hour and minutes spaces Use the digits to enter the numbers and the up and down arrows to change from AM to PM 3 Press MENU or OK to continue SETTING THE VCR1 CHANNEL AUTO TUNING The next step lets you set the VCR1 channel When you set the VCR1 channel you re telling the TV what channel to tune to when you press the VCR1 button on the remote This is called auto tuning Indicate which input you used to connect the VCR If you don t have a VCR1 component connected to the TV skip this step or select Not Connected from the VCR1 Channel choice list For more see Auto Tuning in the Features and Menus section INTERACTIVE SETUP SETUP Would you like to use a VCR with your TV 1 Use TV with a VCR 2 Skip this step 1 Press MENU or OK to bring up the VCR1 choice list SET VCR1 CHANNEL 2 Channel 3 3 Channel 4 4 Vid
74. on many features of your TV You can choose a setting enter a number or adjust a level such as tint or brightness There are three types of control panels sliders choice lists and numeric entry Sliders PICTURE CONTROLS Sliders are used to make adjustments to a particular control SEES E To use a Slider in a menu 1 Press the up or down arrow to select the slider control for the Press MENU to exit feature you want to adjust 2 Press the right or left arrow to adjust the indicator line on the slider 28 FEATURES AND MENUS Numeric Entry A numeric entry control panel is used to enter numbers or letters A pointer appears underneath the column you are changing 1 Press the up arrow to enter a number in the column above the pointer 2 Pressthe right arrow to move to the next column then press the up or down arrow to enter a number 3 When you have finished entering information press MENU or OK CHOICE LISTS Choice lists are used to choose a particular setting from a list of settings 1 Point to a choice on a menu and press MENU or OK to select that choice Now that you know how to access the menus and adjust the control panels the following pages provide a brief explanation of all the menu features The features are organized in order of their location on the Main Menu AUDIO MENU Mute Press OK to reduce the TV s volume to its minimum level Press OK again to restore the volume Tone Controls Displa
75. or example if you want the remote to control the TV you would press the TV button to put the remote into TV mode before you could control the TV 21 USING THE REMOTE 22 REMOTE BUTTONS 0 9 Number Buttons Enters channel numbers and time settings directly though the remote control To enter a two digit channel press the two digits To enter a three digit channel press and hold the first digit until 4 appears then add the second two Example to tune to channel 123 press and hold 1 until 1 appears then press 2 and 3 L E D Arrow buttons up down left right Used to point to different VCR1 ON OFF items in the menu system Also used to adjust the menu controls Also gt E 0 moves the PIP window when no menus are on the screen ANTENNA Functions as TV VCR button in VCR mode and TV receiver button in SATeCABLE mode AUX Puts the remote in AUX mode Also turns on the TV if auto tune is enabled CH up and down buttons Scans up or down through the current channel list Press once to change the channel up or down press and hold to continue changing channels CH CTRL Selects the picture window that is the main or PIP window to be changed by the CH channel up or CH v channel down buttons CLEAR Removes any menu or display from the screen and returns you to TV viewing DVD Puts the remote in DVD mode to operate RCA GE and Proscan DVD players It cannot be programmed If autotuning is enabled it w
76. ou experience any difficulty with your TV check a few basic remedies before calling your service technician TV will not turn on e Check to make sure it is plugged in e Check the wall receptacle or extension cord to make sure it is live by plugging in something else e Maybe batteries in remote control are dead e Maybe remote control is not aimed at remote sensor e The front panel controls may be locked disabled Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the Parental Controls menu and choosing Unblock Controls don t work e If using remote control make sure remote is in TV mode by first pressing TV button e The front panel MENU button may be disabled Use the remote control to turn off blocking Select Front Panel Block in the Parental Controls menu and choose Unblock e Try unplugging set for two minutes and then plug it back in and turn it on again Problems with remote e Maybe something is between the remote and the remote sensor e Maybe the remote is not aimed directly at the component TV or VCR you are trying to control e Maybe remote is not in TV Mode Press the TV button so remote will control TV e Maybe batteries in remote are weak dead or installed incorrectly Try replacing batteries Note if you remove the batteries you may have to reprogram the remote to control other components e Remove batteries and hold number 1 for at least 60 seconds to dr
77. rogramming any of your components press CLEAR until the LED turns off 1 Turn on the component you want to control VCR SAT etc 2 Point the remote at the component to be controlled Press and hold the button you want to program VCR1 VCR2 etc While holding the component button press and hold ONeOFF until the light on the remote turns on then release both buttons For the AUX button using code search will not work you must use direct entry 3 Press and release PLAY then wait 5 seconds or until the LED stops flashing At this point the remote is searching for the correct code to program If after 5 seconds the component you want to control does not turn off press PLAY again to tell the remote to search the next set of codes Continue pressing PLAY until the component turns off or you have searched through all of the codes There are 20 total sets of codes If the component does not turn off after pressing PLAY 20 times then the remote cannot control that particular component REVERSE PLA STOP CC You ll use these buttons when you program the remote to control any component The remote may not operate all models of all brands USING THE REMOTE If the component you want to control does turn off 1 Press and release REVERSE then wait 2 seconds Repeat this step until the component turns back ON 2 To finish press and hold STOP until the light on the remote turns off Using
78. rticle 820 40 of the National Electrical Code Section 54 of the Canadian Electrical Code Part 1 which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Product Registration Please fill out the product registration card packed separately and return it immediately Returning the card allows us to contact you if needed Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase Attach it here and record the serial and model numbers in case you need them These numbers are located on the product Model No Serial No Purchase Date Dealer Address Phone G LINK VCR Plus C PlusCode GUIDE Plus and GUIDE Plus Gold are trademarks of Gemstar Development Corporation The VCR Plus and GUIDE Plus systems are manufactured under license from Gemstar Development Corporation and VCR Index Systems B V respectively VCR required for recording THOMSON MULTIMEDIA INC AND GEMSTAR ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM INFORMATION PROVIDED BY THE GUIDE PLUS SYSTEM IN NO EVENT SHALL THOMSON MULTIMEDIA INC OR GEMSTAR BE LIABLE FOR ANY AMOUNT REPRESENTING LOSS OF PROFITS LOSS OF BUSINESS OR INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION EQUIPMENT OR
79. s View buttons will automatically change to Block Press OK to return to the menu or exit the screen If Parental Controls are not locked you must lock them so the movie rating limits will take effect See the section Locking Parental Controls Viewing Movie Ratings After you block movie ratings you have the option of changing some of the rating status buttons back to View 1 Highlight the rating field and press the up and down arrows to find the rating you want to view Use the right arrow to highlight the rating status field Press the up and down arrows to change the button from Block to View For example if movies with a rating of PG 13 and higher are blocked you can change the rating status button corresponding with NC 17 Your child would then be able to watch all movies with a G PG and NC 17 rating Press MENU or OK to return to the menu or exit the screen and be sure parental controls are locked see the section Locking Parental Controls PARENTAL CONTROLS 1 V Chip TV Rating Limit Movie Rating 3 V Chip Unrated Program Block 4 Channel Block 5 Front Panel Block 6 Lock Parental Controls 0 Exit Rating status Rating field field V CHIP MOVIE RATING LIMIT Rat ing Status PG 15 Block Press v to view programs with this rating Press MENU to exit RATING STATUS NR Block X Block NC 17 Block R Block PG 13 Block PG View G View Some movies may be given a Not Rated NR rating
80. s OK Press CLEAR to exit the GUIDE Plus system and return to the original channel Press GUIDE to exit the GUIDE Plus system and tune to the channel in the video window Then use the Grid Guide Action Buttons as described next VCRI ON OFF TV DOC vD VCR2 AUX SAT CABLE GUIDE OK CLEAR REC VCR STOP PAUSE 322 29 P SWAP CH CTRL RESET QOO 1 Watch 2 GoTo 3 Record an fee SportsCenter Highlights of the day s sports Je with Linda Cohn and John Anderson V ESPN 36 Access Holly Baseball The Simpsons Friends CBS News Wheel of For Extra Power of Att 3rd Rock From Seinfeld News Hour Nightly Bus io Harry London FEATURES AND MENUS Grid Guide Action Buttons Action buttons will change according to where you are in the GUIDE Plus system Be sure to look at the action bar before pressing the command numbers When highlighting the program the following Action buttons appear 1 Watch 2 GoTo 3 Record e Watch Press 1 on the remote to place a timer in the Schedule for the TV to turn on and tune to the program highlighted in the channel listing When the TV turns on the GUIDE Plus system will automatically appear with the scheduled program highlighted and tuned in the video window e GoTo Press 2 on the remote to bring up the direct dial box and enter the number of the channel you want Press OK to highlight the channel and current program
81. sure Choose 0 to J use VIDEO INPUT 3 Press up down to choose Then press OK Select cable box output channel O AUX Select YES if you have a VCR or NO if not Answering NO automatically skips forward to the end of GUIDE Plus setup wu s Tune your VCR to channel 02 then Tune your VCR to channel 2 and turn it off Enter the brand of your VCR Do you have a VCR v Yes No turn it off Select your VCR brand from the list below RCA Press Dem to change brand Then pressOK Congratulations Your Setup is now complete Within 24 hours your TV will When the GUIDE Plus System correctly identifies the correct code for your VCR the VCR s tuner changes to channel 9 Select YES if the VCR automatically changed to channel 9 or NO if it did not If you select NO the system will try another code Did RCA code 01 01 switch your VCR to 09 v Yes No receive your local lineup and program information Press OK to leave Setup Press up down to choose Then press OK The last screen that comes up after you ve successfully finished the GUIDE Plus setup gives you an opportunity to view a demo If you don t want to view the demo highlight EXIT and press OK What would you like to do Remember Setup View Demo e Leave your cable box turned ON to download program information Options v Exit e Leave your VCR turned OFF to record pr
82. ta containing program schedule and channel lineup information A channel lineup is the list of stations and their respective channels To ensure that your first download of data is complete you should leave your TV off overnight Downloads occur several times a day The TV must be turned off for GUIDE Plus system data to download If the TV loses power or is unplugged GUIDE Plus system program listings may be lost When power is restored make sure the setup information is still correct The GUIDE Plus system will receive updated program information during the next scheduled download Channel Lineup If more than one cable company services your area you may be prompted with STEP 5 Choosing Your Channel Lineup after the first GUIDE Plus system download You will need to identify your cable company by selecting the correct channel numbers for the stations in question e Use the up and down arrow buttons to change the channel group and press OK when the correct channel group is highlighted Action Menu Video Buttons Program Options Window Information E 1 Watch 2 Goi0 3 Record gue pF Baseball OX The Simpsons _ Friends Wheel of For Extra Power of Att 3rd Rock From Seinfeld News Hour Nightly Bus Harry London Promotional Channel Information Listings Since the program information provided by the GUIDE Plus system is based on your locale you will need to run Setup again if you move
83. the way you have your satellite receiver or cable box connected to the TV If you used audio video cables choose the video input you connected the cables to If You Have Both a Satellite Receiver and a Cable Box 3 Press MENU or OK to continue Connected to the TV The remote cannot control both a cable box and the satellite receiver If you choose to have the remote control the satellite receiver you must then use your cable box remote to control the cable box You may however prefer to use the satellite receiver remote for satellite programming and set your SATeCABLE button to control your cable box It s your choice 19 20 INTERACTIVE SETUP LABELING THE CHANNELS This last step in the Interactive Setup lets you edit your channel list and label your channels For more information see List and Labels in the Features and Menus section 1 SETUP Would you Like to name each channel 1 Name channels Press MENU or OK to bring up the List and Labels control panel LIST AND LABELS Channel Normal Channel Label Use or keypad or CH v to set channel MENU to exit Use the left and right arrows to point to the three different areas of the control panel called fields Use the up and down arrows to scroll through the numbers in the Channel field and letters in the Channel Label field and select Yes or No in the Normal List field You may wish to refer to the call l
84. tion the Advanced Convergence screen appears The green pattern is fixed The red and blue patterns are adjusted to the green pattern The Red Convergence appears first by default 5 Colored cross hairs show the current adjustment position on the grid To move the cross hairs to a different position use the CH buttons on the remote to move the cross hair highlight up and down and the VOL buttons to move it right and left 6 Usethe arrow buttons to adjust the red pattern Each press of the arrow button makes a slight adjustment from the center of the cross hairs you can press and hold the desired arrow button to make a faster adjustment and then make fine adjustments with single presses of the arrow button 7 Press the INFO button to switch to Blue convergence and follow the steps above to adjust the blue pattern 8 Press OK to exit You will be asked if you want to save the adjustments Yes Saves adjustments No Returns to the Advanced Convergence screen allowing further adjustments Clear Exits screen without making any changes CHANNEL MENU MAIN MENU Signal Type Displays a choice list that lets you select the current antenna type This option does not appear when the GUIDE Plus system Is set up CHANNEL UHF VHF Antenna Choose this if you are currently using an off air 1 Signal Type antenna for TV signals Cable TV Choose this if you are currently using cable or a cable box for TV signals
85. u bar or press GUIDE or CLEAR to exit the GUIDE Plus system Then use the Sort Menu Action Buttons as described next Sort Menu Action Buttons When viewing the results of a Sort the following Action buttons will appear on the bar 19 Watch 29 3 Record e Watch Press 1 on the remote to place a timer in the Schedule and then follow the on line help for further options Placing a timer in the Schedule will cause the TV to turn on and tune to the program highlighted in the channel listing at the predetermined time e Record Press 3 on the remote to set the VCR to record the program highlighted in the channel listing If you have a cable box changing TV channels will not cause the cable box channel to change while recording The program information window will display a confirmation when you have successfully scheduled a program to watch or record Notes If you have selected two programs to watch or record which begin at the same time or overlap you will receive a timer conflict message You must choose between the two programs Be sure that during the GUIDE Plus system setup you specified that you have a VCR Sort Menu Action Buttons 6 36pm 1 Watch 2 3 Record e Ta me a is ort displays show listings by program category and e us time Scroll down to use right to view News left to Sort Menu Selection view Grid Basketball Bowling FEATURES AND MENUS N EWS 6 36pm 1 Watch 2 GoTo 3
86. u switch channel control between the PIP window and the main picture To determine whether you are controlling the PIP or main picture look at the TV screen the yellow channel number is the one you are controlling Press CH CTRL to change which picture you are controlling Main picture PIP picture Picture from TV Picture from VCR Arrow buttons o In PIP SWAP CH CTRL RESET PIP buttons A typical use of SWAP is to scan through channels in the PIP window and when you find a channel you like press SWAP to display that channel in the main picture sending the current channel to the PIP window 51 52 FEATURES AND MENUS CHANNEL MARKER There are several indicators that come up when you press the TV INFO PIP or SWAP button This display is called the Channel Marker 12 01 Displays the current time CC Displayed when Closed Captioning is available on the current channel VCR1 Displays the label assigned to the current channel VID1 Displays the current channel or input channel VID1 or SVID1 VID2 or COMP2 Mute or Stereo Mute is displayed when you mute the audio Stereo is displayed when the current channel is broadcasting in Stereo SAP Displayed when the current channel is broadcasting SAP Second Audio Program information PIP 59 PIP Chan Displays the current PIP channel Sleep Displayed when the Sleep Timer has been set 00 00 Displayed to count down time left on the commercia
87. utton recording if you 1 Remove2 3 change Cait have positioned the G LINK cable wand in front of your VCR See the Setup EAE hi Laa Corn and donn Anderson and Connections section of this manual for more details on positioning the Meses soomi cc B schedule G LINK cable seii Menu M Selection To schedule a program to watch or record 5 Um Once 1 If the GUIDE Plus system isn t on your screen press GUIDE on your remote control 2 Press MENU on the remote to select the Menu bar 3 Highlight a program within the channel listing 4 Select Watch or Record from the Action buttons bar The timer is then automatically logged into the Schedule menu 5 Ifyou select Record make sure to place a blank tape in the VCR and turn it off Note If you have a cable box connected to your TV and VCR tune your VCR to the cable box output channel prior to turning off the VCR The program information window will display a confirmation when you have successfully scheduled a program to watch or record Note If you have selected two programs to watch or record which begin at the same time or overlap you will receive a timer conflict message You must choose between the two programs 47 48 FEATURES AND MENUS To remove or change the frequency daily once or weekly of a scheduled event access the Schedule menu from the Menu bar Press GUIDE to bring up the GUIDE Plus system Press MENU on the remote to select the Menu bar
88. ys the slider controls for adjusting the TV s treble bass and balance Audio Processor Displays a choice list of available audio modes which control the way the sound comes through your speakers You can also directly access this menu by pressing the SOUND button on your remote Mono Plays the sound in mono only Use this setting when receiving broadcasts with weak stereo signals Stereo Most TV programs and recorded materials have stereo audio The TV displays the word STEREO when you tune to a program that is broadcast in stereo Sound Logic Stereo Sound Logic technology monitors a program s audio track and limits volume excursions to a minimum and maximum volume range from the current volume setting Acting like a dynamic range it compresses to limit sudden volume increases like when a commercial comes on SET TIME Pointer If the control panel is not set at the current time use the left arrow to go back over the columns and the up arrow to make changes You can also enter numbers directly by using the number buttons MAIN MENU AUDIO 29 FEATURES AND MENUS 30 Second Audio Program SAP Plays the program s audio in a second language if one is available The TV displays the word SAP when you tune to a program that is broadcast with SAP information SAP audio is broadcast in mono SAP is also used to broadcast a program s audio with descriptions of the video for the visually impaired Aud

RCA P52936 Projection Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents