RCA DRC277B DVD Player User Manual
Contents
1. It is important to read this instruction prior to using your new product for the first time CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING SHOCK HAZARD DO NOT OPEN WARNING THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHOULD BE PLACED ON APPARATUS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with an arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to cause an electric shock The exclamation point within the equilateral triangle is intended to alert the user to HAZARDOUS RADIATION EXPOSURE CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE CAUTION TO REDUCE THE RISK OF FIRE DO NOT PLACE ANY HEATING OR COOKING APPARATUS BENEATH THIS UNIT CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF POWER OUTLET THEN FULLY INSERT the presence of important operating and maintenance servicing instructions in this use2. 14 Number 0 9 Buttons chapters or tracks on a disc 15 A B REPEAT Button 26 SLOW Button Press to perform point to point repeat Press to perform slow forward playback of playback on a DVD or CD DVDs 16 GOTO Button 27 STEP Button Press to skip directly to a specific location Press to advance frame by frame on DVD 17 SUBTITLE Button 28 DISC REPEAT Button Press to select one of the subtitle languages programmed on a DVD If available 18 ZOOM Button Zoom in an image Press to repeat chapter or title of a DVD Press to repeat single track or whole CD DISC FORMATS Disc Function or Operation that is Not Available When the N appears on the screen it indicates that the function or operation attempted is not available at that time This occurs because the DVD manufacturer determines the specific functions of DVDs Certain functions may not be available on some DVDs Be sure to read the documentation provided with the DVD Icons Used on DVDs e Audio CDs are divided into tracks A Sample Icons track is usually one song on an Audio CD tsis Language selections for audio D M En X a ma French Language selections for subtitles Screen aspect ratio ka M Multiple camera angles kom ee GED HID AID TAD TAD Note When playing back a CD G Graphics or Note CD EXTRA disc the audio portion will be played Numbers identify each title chapt
3. CONTROL REFERENCE GUIDE Unit 1 Disc Tray 1 234 5 6 Opens or closes the tray by pressing the OPEN CLOSE button 2 amp OPEN CLOSE Button Opens or closes the tray 3 Remote Sensor Receives the remote control s commands 4 gt PLAY Button Starts or resumes playback of a disc L To Wall Outlet 5 POWER Indicator 78 9 10 Indicator Off The unit is in standby mode Indicator On The unit is turned on 6 STANDBY ON STOP E Button Turn the unit on or put it in standby mode Or stop playing a disc 7 HDMI OUT Jack 8 VIDEO OUT Jack 9 DIGITAL COAXIAL OUT Jack 10 LEFT RIGHT AUDIO OUT Jacks SETUP AND CONNECTIONS CONNECTING TO ATV The unit can be connected to your TV in several different ways depending on the design of your TV Note Use only one of the below listed connection method for connecting to your TV A RCA AUDIO VIDEO JACKS HDMI cable not included connect the HDMI OUT Use the Audio Video cable supplied Connect jack on your unit to the HDMI IN jack on your TV or the VIDEO OUT and left right AUDIO OUT jacks HDMI compatible display on the unit to the VIDEO IN and left right AUDIO When using a HDMI cable do not connect to IN jacks on your TV other analog video outputs e Set an output signal from the HDMI terminal of the DVD player in accordance with your TV s input signal e If you use your TV s speakers for audio and you find
4. been exposed to rain or moisture does not operate normally or has been dropped where they exit from the apparatus DISC FORMATS Compatible Discs a DIGITAL BHOTOVIEW z2 asel awe age VIDEO a vOsReWetate Recordable Digitar aoro This DVD Player is capable of playing the following types of discs DVDs Audio CDs CDs and JPEG files on them Before you put a disc in the player make sure it is compatible You can t play the following types of discs Laserdiscs CD I CD ROM computer only discs DVD ROM or discs recorded using other broadcast standards i e PAL or SECAM CD G discs Note Some discs may not be compatible due to laser pickup recording formats and software used Some technologies and methods used for JPEG file recording on CD Rs can prevent optimal playback of these files on your DVD player by degrading the quality and or the ability of the player to read the file Region Management Information This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs If the region number printed on the DVD does not correspond to the region number of this unit it cannot play that disc The region number of this unit is 1 ee CONTROL REFERENCE GUIDE Remote Control 1 amp OPEN CLOSE Button Press to open or close the disc tray 2 OSTANDBYI ON Button P
5. number Title Chapter C 1 Press the GOTO button to search your desired chapter track Time title time 2 Press A V lt 4 or P button to highlight a chapter track title time and press the corresponding number button s for the chapter track title time you want 3 Press the OK button to confirm The unit will start playback about 3 seconds later TR Noas Disc Time a e Some discs may not respond to this process e Some scenes may not be located as precisely as you specified e This method for accessing specific locations is available only within the current title of the DVD disc PLAYING PICTURE FILE DISC This unit can display picture files recorded on CD R and CD RW discs Playing a Picture File Disc 1 Open the disc door 2 Place a picture file disc onto the tray with label side up ans jooo1 uPG 3 Close the disc door 4 The unit will load the disc and automatically display the contents of the disc on the screen while playing the beginning G3 0003 of the first picture file These files will then be played back one by one If the unit does not automatically start playing press the A W CURSOR and OK button to select a picture file to view 5 Now the picture slideshow begins with the selected picture Notes You can press the Hl PAUSE button to interrupt playback and press the gt PLAY button to resume playback e During playback press the lt gt button repeatedly to rotate th
6. repeat operation A B repeat can only be used within the same title If the start and end of the section to be repeated are in different titles A B repeat is cancelled e You can specify a segment only within the current title or track e The A B repeat function does not operate in scenes where different camera angles are recorded PROGRAMMABLE MEMORY Playing Titles Chapters in a Favorite Order You can combine your favorite titles chapters and play them in the order you determine 1 Press the MEMORY button and the following display appears 2 Select the items in the order you want by pressing the number buttons Each time you press the Cursor buttons V lt P the space is highlighted Highlight where you want to enter then press the corresponding number buttons 1 3 Press the Cursor buttons V A lt P to move the highlighted bar to 2 Play then press the OK button The DVD player starts memory playback 4 To resume normal playback from memory playback a Press the MEMORY button b Press the Cursor buttons V A lt 4 P to move the highlighted bar to Title number Title Chapter E gt Play Clear All ee Chapter number Clear All then press the OK button All the input programs will be cleared c Press the B PLAY button to resume normal playback No tes If the title or chapter numbers you entered is not permitted by the DVD after you press the OK button it will rest
7. the TV doesn t play the DVD player s audio correctly you may need to switch the Audio setting on your DVD player see section 16 of this sheet e Press the HDMI button on the remote control in stop mode to change output signals as below NTSC Auto NTSC 480 Progressive NTSC 720 Progressive NTSC 1080 Interlaced NTSC 1080 Progressive 3 R VIDEO ANALOG Yellow White Red included Yellow White T L nomi E voeo our r piera Notes nai A e Refer to your owner s manual to the connected AUDIO TV as well e When you connect the DVD player to your TV HDM cable e S TO A DISPLAY Using a be sure to turn off the power and unplug both units from the wall outlet before making any For TVs that support it HDMI can connections provide the best quality audio and e If you have a HDMI with HDCP equipped video output depending on media HDMI source and so is the preferred player using a HDMI cable connection type The HDMI cable h incorporates both audio and video Q HDMI the HDMI logo and High Definition signals so you will have just one a Multimedia Interface are trademarks or cable running from the unit to your TV Using a registered trademarks of HDMI licensing LLC monitor or display you can connect it to this
8. Baga This DVD player has earned the ENERGY STAR e Attentionshouldbedrawntotheenvironmental Reorient or relocate the receiving antenna aspects of battery disposal Increase the separation between the e Use of apparatus in moderate climates equipment and receiver On Condensation Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e When left in a heated room where it is warm and damp water droplets or condensation may form inside the unit When there is Consult the dealer or an experienced radio condensation inside the unit the unit may TV technician for help not function normally Let the unit stand for Warning Changes or modifications to this unit 1 to 2 hours before turning the power on or not expressly approved by the party responsible gradually heat the room and let the unit dry for compliance could void the user s authority to before use operate the equipment Should any trouble occur disconnect the AC power cord and refer servicing to a qualified technician Main plug is used as the disconnect device it shall remain readily operable and should not be obstructed during intended use To be completely disconnected the apparatus from supply mains the main plug of the apparatus shall be disconnected from the mains socket outlet completely WARNING Notes on Copyright It is forbidden by law to copy broadcast show broadcast on cable play in pu
9. ECT Please refer to the Playing a Disc 1 instructions accompanying the specific DVD in question for more information about the options available on that DVD N may appear on the screen during operation It means that the desired operation is not permitted by the unit or disc Press the STANDBY ON button to turn on the unit See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2 2 Press the OPEN CLOSE button to open the disc tray 3 Place a disc onto the disc tray with the label side up 4 Press the OPEN CLOSE button to close the disc tray It takes a short while for your unit to load the disc After loading for most DVDs the unit will automatically take you main menu or start playing 5 If the unit does not automatically start playing the DVD press the B gt PLAY button Pausing Playback Still Mode Press the Il PAUSE button on the remote To resume normal playback press the B gt PLAY button Frame Advance Each time you press STEP button the picture advances one frame Press B gt PLAY to resume normal playback ug REPEAT PLAYBACK You can play a specific title or chapter repeatedly Title repeat chapter repeat A B repeat Repeating a chapter DvD You can play the same chapter repeatedly 1 While the disc is playing press the REPEAT DISC button until the Repeat Chapter indicator displays on the screen The current chapter is played repeatedly Repeating a title You can pla
10. ENANCE Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback Handle the disc by holding its inner and outer edges e Do NOT touch the surface of the unlabeled side of the disc Do NOT stick paper or tape on the surface Do NOT expose the disc to direct sunlight or excessive heat Clean the disc before playback Wipe the disc from the center outward with a cleaning cloth NEVER use solvents such as benzine or alcohol to clean the disc Do NOT use irregular shaped discs example heart shaped octagonal etc They may cause malfunctions Cleaning the Unit e Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit e Wipe the unit with a dry soft cloth If the surfaces are extremely dirty wipe clean with a cloth that has been dipped in a weak soap and water solution and wrung out thoroughly then wipe with a dry cloth e Never use alcohol benzine thinner cleaning fluid or other chemicals Do NOT use compressed air to remove dust Important Note Before transporting the unit remove the disc from the disc compartment Specifications and external appearance are subject to change without notice Printed in China w 5 SAFETY PRECAUTIONS DOUBLE INSULATION WHEN This product SERVICING USE ONLY IDENTICAL contains a low power REPLACEMENT PARTS laser device On Placement Rating Plate Location e Do not use the unit i
11. SETUP AND CONNECTIONS CONNECTING TO OPTIONAL EQUIPMENT AMPLIFIER A ANALOG CONNECTION Using an audio video cable included connect the left right AUDIO OUT jack on your unit to the AUDIO IN jack on your other source ANALOG CONNECTION Amplifier of stereo system etc Audio Cable__ Red and White HOMI our Notes OUT B DIGITAL CONNECTION preferred Using a coaxial digital audio cable not included connect the DIGITAL COAXIAL OUT jack on your unit to the DIGITAL AUDIO IN jack on your other source DIGITAL CONNECTION preferred Audio equipment with digital audio input jack DIGITAL AUDIO IN Coaxial Digital Audio Cable HDMI L our DIGITAL R AUDIO e When you connect the unit to other equipment be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections e Ifthe external equipment is television and this audio system is close to it you may experience the interference if the tuner function is selected while the television is working e Refer to the instruction manual of the connected equipment as well PLAYING A DISC DVD Co This user manual explains the basic instructions for operating this unit Some DVDs are produced in a manner that allows specific or limited operation during playback Therefore this unit may not respond to all operating commands THIS IS NOT A DEF
12. TTINGS Audio 1 Press the SETUP button 2 Press the P button then the A W button to select Audio 3 Press the OK button then the A Y button until your preferred Audio is displayed 4 Press the OK button 5 Press the SETUP button to exit the menu Note e Some DVDs may not be played in the language you selected A prior language may be programmed on the disc DVD Menu 1 Press the SETUP button 2 Press the P button then the A W button to select DVD Menu 3 Press the OK button then the A W button until your preferred DVD Menu language is displayed 4 Press the OK button 5 Press the SETUP button to exit the menu Note e Some DVDs may not include your pre selected language In this case the DVD player automatically displays disc menus consistent with the disc s initial language setting Aspect Ratio 1 Press the SETUP button 2 Press the W button to select Video 3 Press the P button then the A W button to select Aspect 6 4 Language Aspect Ratio View Mode HDMI Resolution JPEG Interval Ratio Press the OK button then the A W button to shift and Audio change the aspect ratio 5 Press the OK button GB Mise 6 Press the SETUP button to exit the menu Notes e The displayable picture size is preset on the DVD Therefore the playback picture of some DVDs may not conform to the picture size you select e When you play DVDs recorded in the 4 3 picture siz
13. acks on the current folder disc Edit mode Program operation works only when Edit mode is selected Program view To view tracks files in the Program view list It is disabled when the Program view list is empty Add to program Add files tracks to the Program view list It is disabled if the Edit mode is not selected Browser view To view files tracks in the original view list Clear program Delete the files tracks in the Program view list Select a file track or more you want to delete in complete stop mode press the Il STOP button twice Use the Cursor buttons Vv A lt 4 gt to select tracks files you want to delete a w will appear beside the deleted file track Select Clear program and then press the OK button It is disabled if the Edit mode is not selected Note The program will be deleted if the disc door is opened or selected files are deleted by selecting Clear program CUSTOMIZING THE FUNCTION SETTINGS Language 1 Press the SETUP button Press the P button to select Language Press the OK button then the A F button to shift and 4 video change the Language Press the OK button Audio Press the SETUP button to exit the menu i ubtitle ome Press the SETUP button Press the P button then the A W button to select Subtitle Press the OK button then the A W button to shift and change the Language Press the OK button Press the SETUP butt
14. blic or rent copyrighted material without permission Apparatus Claims of U S Patent Nos 6 836 549 6 381 747 7 050 698 6 516 132 and 5 583 936 licensed for limited viewing uses only This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Die TROUBLESHOOTING GUIDE SYMPTOM CAUSE AND REMEDY No power e Ensure the AC power cord is connected e The unit is not turned on The remote control e Remove any obstacles between the remote and the unit does not function e Use the remote near the unit e Point the remote at the remote sensor on the unit e Replace the batteries in the remote with new one No audio poor e The system is in pause mode Press the gt PLAY button to return to audio or missing normal play mode audio channels e The unit is in fast forward or fast reverse mode Press the B PLAY button to return to normal play mode e Make sure the AUDIO output setting is correct Press SETUP button then choose the AUDIO menu If current setting is Raw try switching to PCM If current setting is PCM try switching to Raw e Make sure the audio cable is connected securely No picture or e Th
15. btitles only via the disc menu If this is the case press the MENU button and choose the appropriate subtitle on the disc menu Angle Selection Some DVDs contain scenes which have been shot from a number of different angles For these discs the same scene can be viewed from each of these different angles 1 While you are playing a DVD with different angles recorded press the ANGLE button to view the number of current angles available 2 Press the ANGLE button repeatedly to change the scene to the next recorded angle e After approx two seconds playback will continue from the new angle you selected e Ifno button is pressed within 10 seconds playback continues without changing the current angle Notes e This function can only be used for discs on which scenes shot from multiple angles have been recorded e If only one angle is recorded e 1 1is displayed Sequence of angle shots Example Display Function While the disc is playing press the DISPLAY button on g the remote control repeatedly to display information on operation status Elapsed time Remaining time DVD Video Elapsed Time Elapsed time from the beginning of the Time 00 01 12 01 52 46 chapter title which is currently playing Title 1 3 Chapter 2 6 Remaining Time Remaining time of the chapter title which is currently playing Audio 1 4 DO D 5 1 Ch Eng Subtitle Off Angle 1 1 Bitrate 8 820Mbps 4f CUSTOMIZING THE FUNCTION SE
16. e only the playback picture always appears in the 4 3 picture size regardless of the Aspect Ratio setting e Always be sure that your Aspect Ratio conforms to the actual TV in use if you connect the unit to a TV View Mode Press the SETUP button Press the A W button to select Video Press the P button then the A W button to select View Mode Press the OK button then the A W button to shift and change the View Mode Press the OK button 6 Press the SETUP button to exit the menu Fill Fill the screen with decoded image Original Display image as its original size Height Fit Fit the screen height with image height Width Fit Fit the screen width with image width Auto Fit Automatically fit the decoded image on screen without distortion Pan Scan Automatically display decoded image on full screen without distortion Note Depending on the DVD you may not be able to view the mode as selected HDMI Resolution 1 Press the SETUP button 2 Press the A W button to select Video 3 Press the P button then the A W button to select HDMI Resolution 4 Press the OK button then the A W button to select the options Auto 480p 720p 1080i or 1080p 15 AOUN LOCATING A DESIRED SECTION DVD E Locating a specific chapter track title time If you know the chapter track title time number you want to play you can locate a specific chapter track title time by directly selecting a chapter track title time
17. e picture Press to rotate picture anti clockwise by 90 Press P to rotate picture clockwise by 90 e Press II STOP button to return the contents of the disc Need to troubleshoot See section 6 on other side of this sheet 12 CUSTOMIZING THE FUNCTION SETTINGS 5 Press the OK button 6 Press the SETUP button to exit the menu Note Select the HDMI resolution according to the performance of the connected TV JPEG Interval Press the SETUP button Press the A W button to select Video Press the button then the A W button to select JPEG Interval Press the OK button then the A W button to shift and change JPEG interval Press the OK button Press the SETUP button to exit the menu Off Plays back one file at a time 5 seconds Plays back images in the form of a slide show at 5 seconds interval 10 seconds Plays back images in the form of a slide show at 10 seconds interval 15 seconds Plays back images in the form of a slide show at 15 seconds interval Digital Output OIRN 1 Press the SETUP button gt Language Digital Output 2 Press the W button to select Audio 3 Press the button then press the W button to select m video Night Mode Digital Output 4 Press the OK button then press the W button to select the output sound format PCM or Raw 5 Press the OK button E Misc 6 Press the SETUP button to exit the menu PCM Select this when co
18. e region number of the disc doesn t match the region number of this abnormal color unit e The TV is not set to receive DVD signal output e The video HDMI cable is not connected securely e The TV is not turned on e Clean the disc No output on your e Check connection between HDMI TV and the unit HDMI TV e Replace the HDMI cable with a better one Bad HDMI cable can cause data lost e Press HDMI key on remote control several times in stop mode to toggle among different HDMI Resolution settings Auto 480p 720p 1080p 1080 Severe hum or noise Check the connections is heard e The plugs and jacks are dirty Wipe them with a cloth slightly moistened with alcohol e Clean the disc There is no disc inside No Disc appears on the screen Insert the disc correctly with the playback side facing down The disc does not e Clean the disc play The unit and disc region number are incompatible Condensation may have formed inside the unit due to a sudden change in temperature Wait about an hour for it to clear and try again The DVD door e Reset the unit press the STANDBY ON button to turn off the unit wait cannot open for a few seconds then restart the unit Need more help Please visit online help at www RCAav com IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 11 Only use attachments accessories specified 2 Keep these instructions by the manufacturer 3 Heed all warnin
19. er and track on but the graphic images will not be shown a disc Most discs have these numbers recorded Title Chapter and Tracks on them but some do not e DVDs are divided into titles and chapters If the disc has more than one movie on it each movie would be a separate title Chapters are sections of titles Notes on Unauthorized Discs You may not be able to play some DVDs on this unit particularly if they were purchased from outside your geographic area or made for business purposes SOUND SYSTEM Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories Soundtracks encoded in Dolby Digital can reproduce from one to 5 1 discrete channels of excellent quality audio The unit automatically recognizes the Dolby Digital bitstream and can output this multi channel signal through the COAXIAL digital audio outputs The unit also provides a downmix suitable for two channel listening though the analog audio outputs An additional Dolby Digital decoder is required for reproduction of the discrete multi channel soundtracks available on many DVDs Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 1 DOLBY ACCESSORIES Please check and identify the supplied accessories e To order accessories visit web site http www RCAav com Remote Control 2xAAA Batteries AV Cable ahs
20. gs 12 Use only with a cart stand tripod bracket 4 Follow all instructions or table specified by the manufacturer or 5 Do not use this apparatus near water sold with the apparatus When a cart is 6 Clean only with a dry cloth used use caution when moving the cart 7 Donot block any of the ventilation openings apparatus combination to avoid injury from Install in accordance with the manufacturer s tip over instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat IN 9 Do not defeat the safety purpose of the polarized or grounding type plug A Portable Cart Warning polarized plug has two blades with one 13 Unplug this apparatus during lightning wider than the other A grounding type storms or when unused for long periods of plug has two blades and a third grounding time prong The wide blade or the third prongis 14 Refer all servicing to qualified service provided for your safety When the provided personnel Servicing is required when plug does not fit into your AC power outlet the apparatus has been damaged in any consult an electrician for replacement of the way such as the AC power cord or plug is obsolete outlet damaged liquid has spilled or objects have 10 Protect the AC power cord from being fallen into the apparatus the apparatus has walked on or pinched particularly at plugs convenience receptacles and the point
21. n places that are The rating plate is located on the back of unit extremely hot cold dusty or humid FCC Statements e The ventilation should not be impeded by NOTE This equipment has been tested and covering the ventilation openings with items found to comply with the limits for a Class B digital such as newspaper table cloths curtains device pursuant to Part 15 of the FCC Rules etc These limits are designed to provide reasonable On Safety protection against harmful interference in a e When connecting or disconnecting the AC residential installation This equipment generates power cord grip the plug and not the cord uses and can radiate radio frequency energy itself Pulling the cord may damage it and and if not installed and used in accordance with create a hazard the instructions may cause harmful interference e When you are not going to use the unit fora to radio communications However there is no long period of time disconnect the AC power guarantee that interference will not occur in a cord particular installation If this equipment does e No naked flame sources such as lighted cause harmful interference to radio or television candles should be placed on the AC power reception which can be determined by turning the cord and the unit equipment off and on the user is encouraged to e Leave a minimum of 10 cm around the try to correct the interference by one or more of apparatus for ventilation the following measures
22. nnected to a stereo amplifier Raw Disc audio raw data will be output Select this when connected to a multi channel eg home theater surround sound amplifier Note If you connected to a TV using HDMI and you are using the TV s speakers for your audio source then make sure to select PCM Night Mode Press the SETUP button Press the A W button to select Audio Press the P button then press the A W button to select Night Mode Press the OK button then press the A W button to change the On Off mode Press the OK button Press the SETUP button to exit the menu Note Night mode is Dynamic Range Control DRC option for analog audio output It limits the volume of louder passages of a movie such as action sequences while keeping quieter passages at normal volume level Use Default Settings 1 Press the SETUP button Language 2 Press the A W button to select Misc 3 Press the P button then select Use Default Settings video 4 ORUN Use Default Settings Use Default Settings dialogue box and press OK button Press the lt P button to select Yes Press the OK Audio button and the original setting will be restored The unit will exit the default setting menu automatically and re load the disc in the disc tray Note It will take 3 5 seconds to reset the DVD player to the factory default 16 811 727791W130 User Manual DRC277B
23. on to exit the menu otes Some DVDs may be set to display subtitles in a different language other than the ones you selected A prior subtitle language may be programmed on the disc Some DVDs allow you to change subtitle selections using the disc menu only If this is the case press the MENU button and choose the appropriate subtitle language from the selection on the disc menu Language Subtitle Audio DVD Menu MO WN akwp 14 PLAYING A DISC IVb ed e You can select different audio channels Stereo Left Right or Mix on an Audio CD by pressing the AUDIO button repeatedly Subtitle Selection 1 While a DVD is playing press the SUBTITLE button to display the current language setting as shown in the example EJ 1 4 Eng 2 Press the SUBTITLE button repeatedly to select the desired subtitle language You can turn subtitles off by pressing the SUBTITLE button repeatedly until the C J Off is displayed Notes e Some DVDs are set to display subtitles automatically and you cannot turn them off even if you set the subtitle function to off e During some scenes the subtitles may not appear immediately after you select your desired scene e The number of subtitle languages recorded differs depending on the disc If only one language is recorded the language does not change e This function can only be used for discs on which subtitles have been recorded in multiple languages e Some DVDs allow you to change su
24. ore to You should re enter correct numbers Some discs may not permit memory playback operation If you select repeat during memory playback the DVD player repeats the current memory playback If you press the MEMORY button while the display appears on the TV screen the display disappears The programmed selections will be cleared when you open the disc tray or turn off the DVD player 43 ers PLAYING A DISC IVb ED Stopping Playback e Press the iE STOP button at the location where you want to interrupt playback To resume playback at the position where the disc was stopped press the B PLAY button e If you press the Il STOP button twice the unit s memory will be cleared and pressing the gt PLAY button will reset the disc to the beginning Zooming into an image While a disc is playing press the ZOOM button to enlarge the image in several levels e While an image is zoomed you can use the A W 4 or gt CURSOR button to shift the view and display the part you want To return to normal view press the ZOOM button until the Q 1 Q 2 Q 3 gt Q Off shows The screen will return to normal e When you reach the edge of the image the display will not shift anymore in that direction Skipping Forward Reverse e Press the K PREV button to go back to current or previous chapters tracks Press the PPI NEXT button to advance chapters tracks e For audio CDs use the number buttons on the remote control to j
25. r manual SEE GRAPHIC SYMBOLS ON THE BOTTOM OF UNIT THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES 003 CET APPAREIL NUM RIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB 003 DU CANADA CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 f REMOTE CONTROL Using the Remote Control To Change Remote Batteries Point the remote control at the REMOTE SENSOR located on the unit 1 Open the battery When using this unit in very bright light the door infrared REMOTE CONTROL SENSOR may gS not work properly The recommended effective distance for s remote operation is about 16 feet 5 meters Battery Replacement 2 Insert two AAA size When the batteries become weak the operating batteries distance of the remote control will be greatly reduced and you will need to replace the batteries Notes Ne e If the remote control is not going to be used for a long time remove the batteries to avoid WARNING Ae damage caused by battery leakage corrosion Do not dispose of the battery in fire or it may e When discarding batteries environmental p exp oae or leak i be exposed to excessive roblems must be considered and local ina fi Fules or laws governing the disposal of these heat Such as sunshine fire or the like batteries must be strictly followed CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type MAINT
26. ress to turn on the unit or put it in standby mode 3 AUDIO Button Press to select one of the audio sound tracks programmed on a DVD or to select the audio output mode on an audio CD If more than one is available 4 ANGLE Button Press to switch the camera angle of the video presentation when scenes with multiple camera angles are recorded on a DVD 5 MEMORY Button Press to create programmed playback sequences 6 DISPLAY Button Press to change disc status information displayed on the TV screen 7 SETUP Button Press to open and close the SETUP menu screen 8 CURSOR A V lt 4 gt Button Press to highlight selections on a menu screen and adjust certain settings OK Button Press to confirm selections on a menu 19 RETURN Button screen 20 TITLE Button 9 CLEAR Button f Press to open the title menu screen Clear input selections and cancel certain 241 MENU Button playback functions Press to open and close the DVD s menu 10 gt PLAY Button 22 HDMI Button Press to start or resume playback Press to change the video output signals in 11 E STOP Button g Put sig stop mode Press to stop playback 23 II PAUSE Button 12 44 SEARCH Button Press to pause playback Fast reverse playback 24 gt gt SEARCH Button 13 K REV Button Fast forward playback Press to move backwards through titles 25 gt gt I NEXT Button chapters or tracks on a disc Press to move forward through titles
27. uage on the disc menu 10 PLAY MODES FOR CD OR JPG DISC When playing CD JPG discs you can modify the Play Modes through the Toolkit which appears on the screen Press the P button to navigate between the windows and the A W button to select files tracks or play mode items Then press the OK button 1 Press the Cursor buttons Y A lt q gt to select Edit mode then press the OK button 2 Use the Cursor buttons V A lt gt to select tracks files shown on the left hand side of the window Press the OK button to confirm the selected tracks files will appear in front of the selected tracks files 3 Select Add to program then press the OK button will disappear from the screen It means that the tracks files you have selected are added into the Program view 4 Select Program view to view programmed files To add more files by Browser view follow the steps 5 Press the B PLAY button to start the program playback The Toolkit has the following play mode items e Repeat Off Track All Off Resumes normal playback Track Repeats the current track file 0002 All Repeats all files on the current folder or all tracks on the disc 0003 Mode Normal Shuffle Music intro mance Normal Resumes normal playback vE 0006 Shuffle Plays back tracks files in random order aar Music intro for Audio CD only Only plays back the first 10 seconds of all the tr
28. ump immediately to the desired track number Fast Forward Fast Reverse 1 Press the SEARCH gt gt or SEARCH 44 button when a disc is playing Each time you press the SEARCH bP or SEARCH lt 4 button the playback speed changes in the following sequence PP x2 PP x4 PP x8 PP x16 Pe x2 x 4 4d x3 Ad x16 t 2 Press the B gt PLAY button when you reach the desired point to resume normal playback Notes e The unit mutes sound and subtitles during reverse and forward scan of DVDs e The fast playback speed may differ depending on the disc Slow motion Play 1 Press the SLOW button on the remote in play mode e Each time the SLOW button is pressed the speed of slow motion playback changes in the following sequence gt 1 2 gt gt 1 4 gt gt 1 6 gt JP 1 8 2 Press the B PLAY button to return to normal playback speed Audio Selection On some DVDs the sound is recorded in two or more formats Follow the directions below to select the preferred language and sound system 1 While a disc is playing press the AUDIO button to show the current audio format number e g 12 400 D2 Ch Eng 2 Press the AUDIO button repeatedly to select the desired audio format Notes e If only one audio format is recorded on the DVD the number does not change e Some DVDs allow you to change audio selections only via the disc menu If this is the case press the MENU button and choose the appropriate lang
29. y the same title repeatedly 2 While the disc is playing press the REPEAT DISC button until the Repeat Title indicator displays on the screen The current title is played repeatedly To resume normal playback 3 While the disc is playing press the REPEAT DISC button until the Repeat off indicator displays on the screen You can play a single track and whole disc repeatedly Repeating a single track E You can play the same track repeatedly 1 While the disc is playing press the REPEAT DISC button until the Repeat single indicator displays on the screen The current track is played repeatedly Repeating a whole disc 2 While the disc is playing press the REPEAT DISC button until the Repeat Folder indicator displays on the screen The whole disc is played repeatedly To resume normal playback 3 Press the REPEAT DISC button until the Repeat off indicator displays on the screen You can play a specific section repeatedly Repeating a specific section a 1 While the disc is playing press the REPEAT A B button at the beginning of the section Rep A is displayed you want to play repeatedly 2 Press the REPEAT A B button again at the end of the section Rep A B is displayed 3 The unit will immediately begin replaying your selection To resume normal playback 4 While the disc is playing press the REPEAT A B button until the RepaB off indicator displays on the screen Notes e Some discs may not permit A B
Download Pdf Manuals
Related Search