POSIFLEX Business Machines LM-6200 Computer Monitor User Manual
Contents
1. POSIFLEX e Light weight and high luminance LCD ee monitor for industrial and commercial use Application covers POS POIS Kiosk factory Automation etc High quality 12 1 TFT LCD panel with scaling up function for full screen display e Successor from earlier LM 6100 series and supports display resolution up to 800 x 600 pixels e Tilt and swivel adjustable construction e Spill proof and easy maintenance structure allowing easy cleaning FCC NOTICE This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference WARRANTY LIMITS Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians The user should consult his her dealer for the problem happened Warranty voids if the user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused2. button to shift the screen display to right or left Press OSD button to save the current setting and return to Geometry adjust submenu VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift up the screen display Press E to shift down Press OSD button to save the current setting and return to Geometry adjust submenu El EXIT Return to Main menu TOOLS SUBMENU When this item is selected there are 5 icons in 7 this submenu EJER 5720 7 Press OSD button to select item or return to main menu Press NXT button to select among OSD submenu reset to default phase smoothness sharpness adjust mode select and exit OSD SUBMENU When this item is selected there are 4 icons in this submenu E zi Press OSD button to select item or return to main menu Press NXT button to select among OSD time OSD horizontal position OSD vertical position and exit OSD TIME When this item is selected there will be only the OSD time icon with an adjustment indication bar under Part 6 it between the main menu area and the video signal mode Press or button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds Default is 30 seconds
3. The monitor will sign for No Signal status and go into power saving mode in 5 seconds when there is no video signal The display will come back when the signal does V OSD A OSD buttons OSD button To enter OSD setup menu or to perform function selected in OSD operation NXT button To go to next option function button To increase setting button To decrease setting O gt button To turn the monitor power ON OFF The monitor can be turned OFF only when there is video signal and can be turned ON only when there is video signal and after the Turn Off Panel message vanishes The default status is set to ON when power is supplied unless manually turned OFF Since this button controls only the display power but not the display controller please try disconnect the power cable or the VGA cable once unfortunately the screen display goes into a mess Part 3 B OSD functions Press OSD button with a normal display on the screen to activate the OSD functions On Screen Display adjustment The OSD window will pop up on the screen On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right Below this area is a row of icons for main OSD menu Below the main menu is a group of icons for submenu that corresponds to one icon selected in the main menu An analysis of the video signal on resolution and refresh rate will be displayed
4. M 6201 3 Pivot screw 1x and pan head fixing screws 2x for LM 6201 4 User s Manual 5 VGA cable 21867244100 for LM 6212 or 21863241710 for LM 6201 6 Power adaptor ASPOP042WTB001 amp power cord for LM 62 12 IV INSTALLATION 1 Match the bottom of the panel unit into the monitor stand for LM 6212 or joining mechanism for LM 6201 LM 6212 Pivot Screw a 2 2 Screw on the pivot screw for LM 6212 Screw on the pivot screw through a split washer and then through a plain washer for LM 6201 3 Fix LM 6201 to the Posiflex TP or KS terminal per instruction of the terminal Note that the joining mechanism of LM 6201 for slim base or universal base of TP or KS terminals has slight styling difference from that of earlier large base of TP 59 70 82 series and therefore cross usage of the joining mechanism should be avoided 4 For LM 6212 connect the end of VGA cable with the power connector to the back of the panel unit For LM 6201 please arrange the power to Part 2 be supplied through the interface cable from the main unit and just connect the video interface cable Connect the other end of VGA cable to the appropriate VGA port The monitor will always turn ON whenever power is made available Power Connector in VGA for LM 6212 VGA Connector Power Connector from Power 5 Adjust for best viewing tilt angle and engage the on screen display OSD adjustment for best display effect whenever necessary
5. Press OSD button to save the current setting and return to OSD submenu OSD HORIZONTAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift OSD window right Press to shift left Press OSD button to save the current setting and return to OSD submenu OSD VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to move OSD window downward Press to go upward Press OSD button to save the current setting and return to OSD submenu g EXIT Return to Tools submenu RESET TO DEFAULT Pressing OSD button on this icon will set all parameters back to the status when the monitor left factory SMOOTHNESS SHARPNESS ADJUST When this item is selected there will be only the smoothness sharpness adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase smoothness of display decrease sharpness Press to go the other way Press OSD button to save the current setting and return to OSD submenu MODE SELECT Pressing OSD button on this icon will have n
6. adjust submenu Press NXT button to select among separate color adjust 4200K 5000K 6500K 7500K 9300K and exit SEPARATE COLOR ADJUST When this item is selected there will be 3 adjustment indication bars between the main menu area and the video signal mode Press NXT button to select among the 3 colors Red Green and Blue respectively Press button to intensify that color Press to reduce Press OSD button to save the current setting and return to Color balance adjust submenu 4200K Pressing OSD button on this icon will set the color balance to a color temperature of 4200 degrees Kelvin 2 5000K Pressing OSD button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin 6500K Pressing OSD button on this icon will set the color balance to a color temperature of 6500 degrees Kelvin 7500K Pressing OSD button on this icon will set the color balance to a color temperature of 7500 degrees Kelvin ga 9300K Pressing OSD button on this icon will set the color balance to a color temperature of 9300 degrees Kelvin EI EXIT Return to Color adjust submenu El EXIT Return to Main menu E GEOMETRY ADJUST SUBMENU There are 6 icons in this submenu AEGSE Press OSD button to select item or return to main menu Press NXT button to select among auto geometry adjust
7. at the bottom Applicable icons in the main menu and its subsequent menus are explained below MAIN MENU There are in total 5 icons in this menu One of the 5 icons will be displayed in inverted color to indicate its No O 3 relationship with the submenu below Pressing NXT button wi shift the selected icon one by one from left to right and then wrap around to the most left Press OSD button to enter the selected sub menu If there is no button for OSD setting is pressed within a period of time about 5 seconds to 1 minute as programmed the OSD window will disappear with all the adjusted parameters saved Explanations on items in sub menu are as below a BRIGHTNESS CONTRAST ADJUST SUBMENU There are 3 icons in this submenu SO Press OSD button to select item or return to main menu Press NXT button to select among brightness contrast and exit BRIGHTNESS ADJUST When this item is selected there will be only the brightness icon with an adjustment indication bar under 1t between the main menu area and the video signal mode Press button to increase brightness Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu g CONTRAST ADJUST When this item is selected there will be only the contrast icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to in
8. by improper application ABOUT THIS MANUAL This manual assists the user to utilize the LCD Monitor LM 6200 series This series is a 12 1 LCD monitor of long endurance industrial standards The LM 6212 is a stand alone monitor for kitchen video KV series host system while LM 6201 is a upgrade kit particularly designed for Posiflex touch terminal TP series or the kiosk system KS series The manufacturer of the LM 6200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology The user may always obtain the most up to date information through any of our web sites http www posiflex com tw http www posiflex com http www posiflexusa com LM 6200 Series LCD Monitor User s Manual FEATURES Rev Original Copyright Posiflex Inc 2006 TRADE MARKS AND SERVICE MARKS POSIFLEX is a registered trademark of Posiflex Inc Other brand and product names are trademarks and registered trademarks and service marks of their respective owners P N 19050902010 Part 1 E u ll MODEL NUMBERS LM 6212 12 1 LCD Monitor w stand LM 6201 12 1 LCD Monitor w joining mechanism for Posiflex touch terminals such as TP or KS series LM 6201 on back of LM 6212 TP or KS lll CARTON CONTENTS 1 LCD Monitor panel unit 2 Monitor stand for LM 6212 or joining mechanism for L
9. crease contrast Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu EI EXIT Return to Main menu re COLOR ADJUST SUBMENU There are 4 icons in this submenu Sloe El Press OSD button to select item or return to main menu Press NXT button to select among auto color adjust auto RGB reset Color balance adjust and exit AUTO COLOR ADJUST Upon an OSD button press on this icon the monitor will perform an automatic color adjustment and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to Part 4 make the choice g ACCEPT Accept the adjustment setting e REJECT Decline the adjustment setting and return to previous setting AUTO RGB RESET Upon an OSD button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice ACCEPT Accept the reset result H REJECT Decline the reset and return to previous setting e COLOR BALANCE ADJUST When this item is selected there will be 7 icons in this item rzooooobsooPsoorso0 fe between main menu area and the video signal mode Press OSD button to select an item or return to color
10. horizontal size phase horizontal position vertical position and exit AUTO GEOMETRY ADJUST Upon an OSD button press Part 5 E u on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice ACCEPT Accept the adjustment setting REJECT Decline the adjustment setting and return to previous setting HORIZONTAL SIZE When this item is selected there will be only the horizontal size icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase horizontal size Press to decrease Press OSD button to save the current setting and return to Geometry adjust submenu E PHASE When this item is selected there will be only the phase adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or button to adjust the pixel synchronization phase for best picture display Press OSD button to save the current setting and return to Geometry adjust submenu HORIZONTAL POSITION When this item is selected there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or
11. o effect at all if the display mode is not one of the confusing modes The confusing modes here mean 640 x 400 or 720 x 400 in display resolution as both mode have refresh rate of 70Hz horizontal frequency of 37 9KHz and pixel frequency of 31 5MHz making it impossible for automatic select These modes are not used in normal Windows display El EXIT Return to Main menu El EXIT Exit OSD setup with all adjustment saved Part 7 Vi SUPPORTED DISPLAY MODES For video signals beyond the supported display modes there will be a message Out Of Range on middle of screen Maximum supported color depth is 18 bits or 262 144 colors Supported display modes are as in the table Display Resolution Refresh Rate Hz Horizontal Frequency KHz 640 400 70 37 9 60 31 5 640 480 72 37 9 75 37 5 720 400 70 37 9 56 35 1 60 37 9 800 600 7 481 75 46 9 Part 8 e Part 10
Download Pdf Manuals
Related Search