Polaroid FDM-0700A TV DVD Combo User Manual
Contents
1. 23 Play Operation 24 Playback Functions 27 System Setup 29 DVD Setup 29 LCD Setup 31 Installing the Unit in Kitchen 32 Troubleshooting 34 Specifications 35 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USE SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient The lightning flash with arrowhead symbol within an equilateral triangle A magnitude to constitute a risk of electric to persons The exclamation point within an equilateral trian2. 6 2 a 032 NL lt lt 4 8 8 9 1 ANT INPUT jack 4 Left Right AUDIO input jack Connected to external antenna to Connection for audio input receive the TV program in TV mode 5 VIDEO input jack 2 FM 759 coaxial antenna jack Connection for video input 3 AM antenna jack 6 Direct current 12V input jack Display Panel Drawing os W WT Jof b pem Je E MANI JB JI s 12 8 4 5 6 7 8 1 FM radio status indicator 5 Minute or character indicators 2 AM radio status indicator 6 Character indicators AM time indicator 7 FM frequency unit of MHz indicator 3 PM time indicator 8 AM frequency unit of KHz indicator 4 Hour or character indicators 10 Using Of Remote Control Point the remote control towards the main unit when operating The r c works best at a distance less than 7m and at an angle of up to 60 to the front of the unit No obstacles may stand in the way between r c and infrared sensor The batteries normally last for about six months This depends on how often and for what operations the remote control is used If the remote control unit fails to work even when it is operated near the player replace the batteries If the r c is not used for a long period of time please remove the batteries from the compartment to prevent damage by leakage ll Rem ntrol Preparation Refer to the drawing and remove the empty battery
3. Power on To set the playback start time of the signal source use number buttons to input the desired start time in sequence of hour minute Press the gt lt direction buttons to shift between am and pm gt 21 E TV Function 000000 Power off To set the playback end time of the signal source use number buttons to input the desired time in sequence of hour minute Press the gt lt direction buttons to shift between am and pm When the playback of the signal source is over the player will enter standby mode Signal Use the gt lt direction buttons to select CATV AIR FM or AM Channel Use number buttons to input the desired TV channels In CATV signal input mode there are 124 channels to choose from 2 125 in AIR signal input mode there are 68 channels to choose from 2 69 Press the buttons on the remote control to select the desired channel or use the number buttons to input and then press the OK button to confirm Note The function is active as long as the unit is continuously supplied with power The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day 5 AV Function AV Function The player has an additional AV input so it can function as a monitor for a DVD player video cassette player satellite receiver video game etc When an AV source is connected press the AV button on the remote control to ent
4. 400 2443 Polaroid is a registered trademark of Polaroid Corporation of Waltham MA USA and licensed for use on the FDM 0700A to Petters Consumer Brands LLC 36
5. power of the unit first and then unplug the power supply to prevent malfunctions 2417 s Radio Function Radio Function Operation Press the AM or FM button on the remote control or front panel to enter AM or FM radio mode Then press the SEEK button for about 1 5 seconds on the remote control or front panel to start searching forward backward from the current frequency Press the SEEK button again to stop searching Radio frequency will be displayed on the display panel The frequency range of FM is from 87 5MHz to 107 9MHz frequency range of AM is from 520kHz to 1710kHz Fine Tuning Press the SEEK button on the remote control or front panel once to fine tune the frequency forward backward under radio mode Semi memorizing radio stations If you like a radio station and want to store it for later listening press the SET button to memorize it SAVE X X will be displayed on the display panel X X represents the default station number There are two methods to organize the memorized stations Use the gt buttons to adjust the channel number for your preference and then press the SET button again the station will be memorized with the coded station number Press the SET button again the station will be automatically memorized with the default station number in sequence You can store radio stations from 0 to 19 total 20FM or 20AM radio stations If no buttons are pressed within 3 seconds of pressing th
6. receptacle nap 5 Insert the battery into the receptacle Make sure the polarity matches the marks inside the component Insert the receptacle into the remote control 12 a eo 1 Ou aj SOC Remote Control Drawin Remote Control Remote Control 11 SEEK button Under radio mode press once to fine tune frequency backward Press for about 1 5 seconds to search radio stations backward automatically Under DVD mode press to activate fast backward playback 12 SEEK button Under radio mode press once to fine tune frequency forward Press for about 1 5 seconds to search radio stations forward automatically Under DVD mode press to activate fast forward playback 13 PLAY button Press to start playback under DVD mode 14 STOP button Press to stop playback under DVD mode 15 TITLE button Press to display titles if present on the disc under DVD mode 16 MENU button Press to access the disc menu under DVD mode 17 REPEAT button Press to repeat a title chapter title or the entire disc 18 A B Repeat button Used to play a section of the DVD from point A to point B Press once to select the starting point A press again to select the end point B Press a third time to stop the A B Repeat 13 1 POWER button Press to access to or exit the STANDBY mode 2 SUBTITLE button Press to select a subtitle language or to tur
7. 7 Under the Counter LCD DVD FDM 0700A Operating Manual Table of Contents Table of Contents 2 Important Safety Instruction 3 FCC Notice 5 Characteristic Features 6 Disc Information 7 Front Panel 8 Rear Panel and Display Panel 10 Remote Control 11 Preparation 11 Using Of Remote Control 11 System Connections 13 Connecting To External AV Signal Source 15 Connecting To TV Signal Input Source 15 Connecting To Antenna 16 Connecting To the Power Adapter 17 Radio Function 18 TV Function 19 AV Function
8. CD discs There are many different methods for storing MP3 songs Usually one MP3 disc includes many folders directories and every folder includes several files songs Load a MP3 formatted disc into the DVD Player and a menu will be displayed on the Screen In stop status press the up down direction button to select the directory as you desire and press the OK or PLAY button for confirmation use the up down direction buttons again to select the desired track In playback status use the or I button to select the next or previous track During MP3 playback press the previous or next button to turn the page There is no search by time or slow playback function for MP3 discs 25 Play Operation JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution Hundreds of pictures can be stored on a disc in this format In order to view JPEG photo albums you can ask your film development company to make a PICTURE CD when they develop your film Normal Playback Load a JPEG disc in Use the OK button and Left Right direction button to select a submenu with picture and then use the Up Down direction button to select the contents Many discs have other contents besides pictures Picture Rotation This can be used only when the picture is normally displayed Once another picture is selected rotation will be cancelled automatically During playback us
9. Normally there is a selecting menu for DVD discs You can press the MENU button to enter the menu and use the direction buttons to highlight an item you would like to select Press the OK button to select it Title amp Chapter Normally there are several titles in a DVD disc and several chapters sections in a title You can select any title or chapter quickly by entering the relevant number Audio DVD discs can contain up to 8 audio bit streams For Example English Spanish French etc To select the audio bit stream you prefer press the AUDIO button on the remote control during playback The DVD player will play the next audio bit stream every time you press the AUDIO button in succession Note This function is only available for discs that have several audio bit streams recorded onto it 24 Subtitle A DVD disc can be recorded with up to 32 subtitles Press the SUBTITLE button on the remote control during playback to select the one you prefer NOTE This function is only available on DVD discs that are recorded with multi subtitles CD Playback The player will play all tracks on a CD disc by default You can use the M4 and PREV NEXT skip buttons or number buttons to select a track MP3 playback MP3 is an Audio compression format which compresses the audio signal at the rate of 12 1 When using the MP3 format one disc can record more than 600 minutes of music with sound quality that is similar to that of
10. arantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Advanced Playing Function Compatibility Plays DVD CD CD R CD RW JPEG and MP3 discs On Screen Display Displays your choice of English Spanish or French Fast Search Function Multi speed fast forward fast reverse slow play and repeat playback Zoom Function Allows the viewer to enlarge in the picture Search By Time Search for a certain time on a disc Last Memory Playback Continues playback from a stopped point as long as power is applied to the DVD Player TV Functions Clear TV signal reception Search for TV channels automatically 6 Automatically memorize the channels Radio Functions Clear AM FM signal reception Search for radio stations automatically Store radio stations easily Search for radio stations in high or low frequency range har ristic F This product incorporates a DVD player LCD d
11. e SET button first time the frequency will appear on the display panel again and the station will not be stored Accessing memorized radio stations Press the number buttons on the remote control to access a radio station by its memory location code Press the gt v buttons on the remote control or front panel to select the radio stations forward and backward When selecting the stations the CH XX will appear on the display panel where the XX is the channel number of the stored radio station After a few seconds the CH XX disappears and the radio frequency will be displayed once again 18 TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel After connecting the antenna connect the power supply cord If the player is in standby mode press the POWER button on the front panel to turn on the power Press the TV button on the remote control to shift to TV mode Press the buttons on the remote control or use the number buttons directly to select the desired channel Some preferences can be preset Picture Parameter Setup Press the TV LCD SETUP button once on the remote control to enter PICTURE setup menu and screen display as shown PICTURE Brightness 11 Contrast 13 Color 14 Language English Reset EXIT gt TV SETUP Use the V A buttons to select the item you want to set Brightness Contrast Color Use the gt lt buttons to adjust you can ad
12. e disc altogether Access parental control by pressing the 4 direction buttons on the remote control and then press the OK button 30 System Setup Password Parental control features are password protected The original setting is unlocked This setting allows you to use number buttons to input any password Note The Default Password is 1369 This password is always effective even after you have selected your own password and changed it To avoid the possibility of others using the default password to set the parental level and change the password you can record this default password in another area and delete it from this manual Some discs can be limited depending on the age of users while some discs cannot Default Reset Use this function to reset all the settings Note For preference setting the unit must be in the stop mode LCD Setup Under DVD mode press the LCD SETUP button on the remote control or front panel there will be menu displayed on the screen PICTURE Brightness Contrast 13 Color 14 Language English Reset Exit gt Use the V A buttons to select the item you want to set Brightness Contrast Color Use the gt lt buttons to adjust you can adjust the items between 0 and 20 Use the V A buttons to select the Language press the lt lt buttons to select English French or Spanish Select Reset to resume the original status Press the lt button on the remote control to exit fr
13. e the direction buttons to rotate the picture Zoom and Move The ZOOM button is used to turn on off the zoom and move functions When this function is turned on use the REV FWD SCAN button to control zoom proportion and the TV screen will display the relevant proportion When this function is turned off the picture will resume normal size Press the MENU button to return to menu page e Some JPEG discs may not support rotation or zooming functions 26 Stop During playback press the STOP button once on the remote control to stop playback of a disc Press the PLAY button and the DVD Player will resume playback of the disc from the point where it was stopped Pause Press the PAUSE button once on remote control or front panel to pause playback Press the PLAY button to resume normal playback Resume Playback Press the STOP button at the point if you wish to stop the playback of a disc The DVD Player will memorize the location where playback of the disc was stopped Press the PLAY button to resume normal playback The DVD Player will resume the playback of the disc from the location where it was stopped This function will not operate if the disc is removed from the DVD Player Press the STOP button twice 2 Playback of the disc will stop When the PLAY button is pressed again playback of the disc will start from the beginning of disc Zoom Press the ZOOM button on the remote control to cycle through the different zoom set
14. e volume Press to increase the value in the picture setup menu 19 V Press to select items in the setup menu Press to select the channels or radio stations backward under TV or radio mode Press to adjust the value downward when setting the time on the display panel 20 TV LCD SETUP button Press to enter the TV LCD setup menu 21 LCD screen Presents a high resolution picture 11 SEEK button Under radio mode press once to fine tune frequency backward or forward Press for about 1 5 seconds to search radio stations backward or forward automatically Under DVD mode press to activate fast backward or forward playback 12 MUTE button Press to turn the speaker output on or off The corresponding information will be displayed on the display panel 13 SET button Press to enter and exit from the timer setup menu Press to memorize the station under AM FM status 14 TIME button Press it once to display the time on the display panel In standby status the time is still displayed on the panel Press it again to set the time on the display panel Use the buttons to select the editing position of hour or minute and then use the gt buttons to adjust the value of the hour or minute upward and downward 15 4 Press to select items in the setup menu Or press to decrease the volume Or press to decrease the value in the picture setup menu Rear Panel and display pne Rear Panel Drawing
15. er external input AV mode Picture Parameter Setup Press the LCD SETUP button once on remote control to enter PICTURE setup menu and screen will display as shown PICTURE Brightness 11 Contrast 13 Color 14 Language English Reset Exit 4 Use the V A buttons to select the item you want to set Brightness Contrast Color Use the gt lt buttons to adjust the items between 0 and 20 Use the V A buttons to select the Language press the lt lt buttons to select English French or Spanish Select Reset to return to the factory default settings Press the lt button on the remote control to exit from the setup menu Note Under AV mode if there is no signal the LCD screen will be turned off automatically When connected to an AV signal source make sure the type of the selected AV signal source is NTSC 23 Play Operation Preparation 1 Install the unit in the kitchen refer to page 32 for details 2 After connecting the unit to the AC power turn on the unit s power by pressing the POWER button on the front panel or the remote control 3 Press the DVD button on the remote control or the SOURCE button to shift to DVD mode 4 Press the EJECT button on the front panel or the remote control to open the disc tray 5 Load the disc with the label facing up 6 Press the EJECT button again to close the disc tray The player will automatically search for the disc and start playback DVD Playback Menu
16. gle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE POWER SUPPLY Connect the supplied adapter to the side of the DVD player in the slot marked DC 12V IN Plug the two prong end of the power cord to an AC100 240V outlet If you have difficulty inserting the plug turn it over and reinsert it if the unit will not be used for a long time disconnect the plug from the outlet NOTE Before plugging the power cord into an AC outlet make sure that all the connections have been made CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Refer to service manual for servicing instructions 335 Important Safety Instructions Note 1 Read these instructions IMPORTANT FOR LASER PRODUCTS 2 Keep these instructions 1 CLASS 1 LASER PRODUCT 1 2 DANGER Visible laser radiation when open and interlock failed or 3 Heed all warnings defeated Avoid direct exposure to beam 4 Follow all instructions 3 CAUTION Do not open the top cover There are no user service 5 Do not use near water able parts inside the unit Leave all serv
17. he unit or when a wide screen TV is connected to the video output OSD Lang There are three different OSD languages for selection You can select English French or Spanish Captions You can choose captions ON or OFF during playback Screen Saver When activated under stop mode the unit will go into screen saver mode if the same image remains on the screen for several minutes and then enter standby mode automatically 29 System Setup Speaker Setup Downmix Select LT RT in DOWNMIX the player will output the audio signal IN MIXED NONO Select Stereo then the player will output a stereo signal Dolby Digital Setup Dual Mono The function is used to select from stereo left only right only and mixed mono Dynamic Use this item to adjust linear dynamic compression rate to get different signal compression effects Video Setup Sharpness Use this setting to adjust the sharpness level Brightness Use this setting to adjust the brightness level Contrast Use this setting to adjust the contrast level Preference Page Audio Subtitle Disc Menu This setting allows you to hear or read the subtitles of a DVD in your choice of English Spanish and French etc if the disc contains multiple languages Parental DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc Depending on the disc you can lock out selected Scenes or playback of th
18. icing to qualified service personnel 6 Clean only with dry cloth 7 Do not block any ventilation openings Maintain well ventilated conditions around the product Do not put product on bed sofa or anything that blocks ventilation Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over x 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparat
19. ing at the player Make sure batteries are inserted correctly check polarity Replace weak batteries The remote control does not work Other Notes Static or other external interfere may cause the player to behave abnormally If this occurs unplug the power supply cord from the outlet and plug it in again to reset the player If the problems persist then please disconnect the power and consult a qualified technician x4 Specifications 7 inches Wavelength 780 650nm NTSC 20Hz 20kHz 2 5dB 85 dB x 70dB 1KHz gt 70dB 1KHz gt 80dB 1KHz PLL 520 1710kHz 87 5 107 9MHz AC100V 240V 50 60Hz lt 25W 355mm X 75mm x 285mm W H D About 4 kg LCD screen size Laser Wavelength Video System Frequency Response Audio Signal to Noise Audio distortion noise Channel Separation Dynamic Range System Radio Frequency AM Range FM Power Power Consumption Dimension Weight DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works 1992 1997 Dolby Laboratories All rights reserved 35 For service support and warranty information visit www polaroidelectronics com or in the US call 1 866 289 5168 in Canada call 1 866 301 7922 and in Mexico call 01 800
20. isplay TV receiver and radio function in one system It is designed for convenient use in the kitchen Please refer to page 32 for the installation instructions Multiple Mode e DVD TV Radio External mode e e e Audio amp Video Input High Quality Property Video Screen Supports normal screen 4 3 and wide screen 16 9 aspect ratios AV Input External Audio Video input can be connected to most external AV sources LCD Liquid Crystal Display screen Color video screen designed with LCD technology clearly shows video data Amplifier Function Built in 2x2 5w stereo amplifier with left and right speakers Switching Power Adapter Automatically adapts to the voltage required Special Functions Supports Multi language and Parental lock features Di Inf ti Disc Formats Supported By This Player PLAYBACK TIME DISC LOGO DIAMETER PLAYABLE SIDES 133 min SS SL 242 min SS DL 12cm DVD 266 min SS SL VIDEO 41 min SS SL 75 min SS DL 82 min DS SL 150 min DS DL aur inca 12cm 74 min co US DIGITAL AUDIO 8cm 20 min 8cm MP3 12cm 600 min The disc maker specifies the operation of some DVD discs Please refer to the instruction manual with the disc Care of Discs Cleaning of Discs Do not touch the playing surface of the If a disc has fingerprints or dust on it disc lightly wipe the disc with soft cloth from Do not stick paper or labels on the disc the center of the disc
21. just the items between 0 and 20 Use the V A buttons to select the Language press the lt lt buttons to select English French or Spanish To restore a setting to the original value use the W A buttons to select Reset then press the OK button to confirm the change Press the lt button on the remote control to exit from the setup menu Press the lt button on the remote control to enter TV Setup menu TV System Setup When the lt button is pressed the TV system setup menu will appear TV SETUP Signal CATV Channel 002 Skip ON Fine Tuning Auto Memory lt PICTURE EXIT 19 TV Function Use the V A buttons to select the item you want to set Use the gt lt buttons to select the item and enter it Press the lt button on the remote control to exit from the setup menu Press the lt button on the remote control to return to the picture setup menu Signal Use the lt direction button to select CATV TV signal input mode Use the lt direction button to select AIR TV signal input mode Channel Use the gt lt buttons to change the channel In CATV input mode you can select channels from 2 to 125 in AIR input mode you can select channels from 2 to 69 Skip When the lt button is pressed to turn the function ON it will skip the current channel when using V A to select channels When the lt button is used to turn the function OFF it will play the channels in sequence when selecting under no
22. k press the A B button on the remote control at the beginning of the segment point A you wish to play repeatedly Press the A B button again to mark the end of the segment point B The DVD player will automatically return to point A and repeat playback of the selected segment A B To resume normal playback press the A B button again Screen Mode Press the 16 9 4 3 button on the remote control to switch the screen aspect ratio between 16 9 and 4 3 2s28 System Setup DVD Setup You can customize the set up menu to your own preference Press the DVD SETUP button on the remote control to display the setup menu The menu will include General Setup Speaker Setup Dolby Digital Setup Video Setup and Preference Setup Press the direction button 4 4 gt on the remote control to select a category All the items in the category will appear on the screen Press the OK button to enter the category Category When you enter a category all the items under this category will appear the highlighted category is the current set up Press the right direction button on the remote control to select another category new selection will be highlighted Press the OK button for confirmation Press the left direction button 4 to enter the other setup menu s General Setup TV Display Select Normal PS or Normal LB when a 4 3 TV is connected Select Wide when a 16 9 when using the screen on t
23. n off the speaker output The corresponding information will be displayed on the display panel 32 PAUSE button Press to pause playback in DVD mode 33 ZOOM button Press to enter and cycle through zoom functions use the direction buttons to pan around the screen 34 VOL Press to increase or decrease the speaker volume level 35 SLOW button Press to activate slow forward playback 14 19 EJECT button Press to open or close the disc tray 20 AUDIO button Press to access various audio languages when the DVD disc contains multiple audio languages 21 0 9 number buttons Select numbers by pressing these buttons 22 GOTO button Press to select the desired disc starting Time Track or Title 23 10 button Select numbers greater than 9 by pressing the 10 button first and then additional number buttons as needed 24 16 9 4 3 button Press to shift the aspect radio between 16 9 and 4 3 25 DVD SETUP button Press to access the DVD setup menu under DVD mode 26 INFO button Press to display detailed playback information Press repeatedly to display additional information or to turn the information display OFF 27 LCD ON OFF button Press to turn the LCD screen display on or off under TV AV and DVD mode m Connection Do not connect the power cord until all other connections have been made Each time you restart the unit it remembers the last function used Connecting T
24. n subtitles off when a DVD with multi subtitles is playing 3 DVD button Press to enter DVD mode 4 TV button Press to enter TV mode 5 AV button Press to shift to external AV input mode 6 FM AM button Press to shift to FM AM signal input mode 7 TVILCD SETUP button Press to enter the TV LCD SETUP menu 8 OK button Press to confirm selections 9 rav Press to select menu items or settings Press 4 buttons to adjust volume Or press to adjust value in the picture setup menu Press v buttons to select channels or radio stations forward and backward in TV or radio mode Or press to adjust the value of time when setting time on the display panel 10 SET button Press to enter and exit from the timer setup menu Or Press to memorize the station under AM FM status Remote Control 28 TIME button Press it once to display the time on the display panel In standby status the time is still displayed on the display panel Press it twice to set the time on the display panel Use the buttons to select the editing position of hour or minute use the gt buttons to adjust the value of the hour or minute upward and downward 29 NEXT button Press to go to the next track under DVD mode 30 PREV button Under DVD mode press to go to beginning of current track or chapter Press twice repeatedly to go to beginning of a previous track or chapter 31 MUTE button Press to turn o
25. o External AV Signal Source Connections should be made as follows 6 oR 2 A AV SIGNAL SOURCE Connecting To TV Signal Input Source Cable TV Signai Input 15 Connecting To Antenna Connect the supplied AM FM antennas to listen to the radio AM LOOP ANTENNA FM ANTENNA 2 In order to improve the signal move AM loop antenna away from system and other equipment Extend FM antenna fully Keep the FM antenna as horizontal as possible after connection When connecting the supplied AM loop antenna connect two black cords to AM and ground jacks as shown below OUTDOOR ANTENNA not supplied SYSTEM sin FM 750 EARTH WIRE not supplied If the FM reception is poor use a 759 coaxial cable not supplied to connect System to an outdoor FM antenna as above If you connect the system with outdoor FM antenna you should earth the system in order to avoid lightning strike Do not connect the earth wire to gas pipe to prevent gas explosion 16 Connecting To the Power Adapter This unit is powered via the switching power adapter supplied See the below figure for details a 0 AE DA AC100 240V 1 Connect the AC adapter to jack marked with DC 12V IN on the rear panel of the unit 2 Plug the two prong end of the power cord to the grounded electrical socket 3 When not using the unit turn off the
26. om the setup menu 3 Installing the Unit In Kite Installing the unit under a cabinet The player unit may be installed in the kitchen with or without the spacer The suggested mounting position of the unit is under a wall cabinet See drawings below NOTE The dimensions of the player 355mm 75mm x 285 mm W H D There should be at least 35mm distance between the unit and the wall Installing steps 1 Mark the position of the 4 holes by using the supplied template Drill four 6 5 mm diameter holes As shown below 239 5 Installing th nit in Kitchen 2 If the cabinet door overhangs the shelf and obstructs the unit adjust the unit or the shelf height for clearance 3 Install the unit with the supplied mounting screws 4 There should be at least 35mm distance between the unit and the wall Quick hints Since the unit is rather heavy be careful while doing the fixing work To reduce risk of fire do not place any heating or cooking appliance beneath the unit especially while the LCD screen is open on viewing Mount the unit so that its AC power cord can be plugged directly to a wall outlet Do not use a converter or extension cord Be sure that the AC power cord has no slack when the player is working because the cord acts as an FM wire antenna If the AC power cord has some slack wind it up to the cord hook until the cord has no slack The unit has a built in ferrite ba
27. outward LCA Les Storage of Discs Never use record cleaning sprays or Do not expose discs to direct sunlight or any other solvents to clean your discs excessive temperatures ErontPanel Press twice to go to the previous track chapter 7 SOURCE button Press to shift among DVD TV AV FM and AM mode 8 EJECT button Press to open or close the disc tray 9 Remote Sensor Receives remote control signal for operation 10 Display panel Displays the time status radio frequency and radio station number When adjusting volume the VOL and volume level will be displayed on the display panel for several seconds 8 Front Panel Drawing 1 POWER button Press to enter or exit the STANDBY mode 2 PLAY PAUSE button Press to start or pause playback under DVD mode 3 Disc Tray Used to load disc 4 STOP button Press to stop playback under DVD mode 5 9M Press to go to the next track under DVD mode 6 Under DVD mode press once to go to beginning of the current track chapter ErontPanel 16 4 Press to select items in the setup menu Press to select channels or radio stations forward under TV or radio mode Press to adjust the value upward when setting the time on the display panel 17 OK button Press to confirm selections in setup menu 18 gt Press to select items in the setup menu Press to increase th
28. r antenna for AM radio reception Check the condition of AM reception before fixing in position Install the unit as far as possible from a source of noise for example refrigerator microwave oven fluorescent lamp etc 33 SYMPTOM CHECK ITEM Make sure a disc is loaded Make sure the disc is loaded with label side up Disc should be clean not dirty or warped The player cannot Player s region code should be the same as the region code play of the DVD disc Make sure water condensation has not occurred If it has remove the disc and keep the player power on until the moisture evaporates Make sure system connection is correct Make sure the player is not under muting mode Press the MUTE button to turn on the speaker Make sure the volume is adjusted to the lowest Adjust the volume upward Is your disc dirty or warped Clean or replace it There is no sound There is no picture or picture is unsteady Position of the picture is Make sure the video type of the AV signal source TV is NTSC Make sure system connection is correct Is your disc dirty or warped Clean or replace it incorrect Cannot continue to Make sure the player is not in A B repeat status play and plays a Press A B button to cancel A B repeat status section repeatedly Is your disc dirty or warped Clean or replace it Make sure there are no obstructions between the remote control and the player Make sure the remote control is point
29. rmal playback status Fine Tuning Use the V A buttons to select Fine Tuning and then press the lt lt buttons to tune forward or backward from the current channel Auto Memory Use the V A buttons to select Auto Memory press the OK button to enter auto memory mode SEARCHING CH 009 EXIT 4 20 The auto memory will take a few minutes The unit will search channels from the lowest channel to the highest channel in the standard channel list When tuning operations are complete the unit will exit and store the channels by sequence in the memory During tuning press the lt button to exit the auto memory Use the V A direction buttons to select the desired channel from those in memory Timer Setup Press the SET button on the remote control to enter Timer setup menu the screen will display as below TIMER SET Timer OFF Power on EP Eam Power off eS Signal CATV Channel 002 Exit SET Use the V A buttons to select the item you want to set Use the lt 4 buttons to enter the item and to select Press the SET button again on the remote control to exit from the setup menu Timer Use the lt lt direction buttons to select ON or OFF This function allows you to set the start time and end time of the desired signal source No matter what mode the unit is in this function will automatically start the playback of the desired signal source Select ON to activate the function select OFF to disable the function
30. tings Fast Playback Press the or button on the remote control to activate fast forward or rewind playback Slow Playback Press the SLOW button to activate slow forward playback There is no slow playback for MP3 CD discs Search By Time During DVD disc playback press the GOTO button on the remote control once there will be a menu displayed on the screen You can set or select items for your preference Use the v direction buttons to select items press the OK button to enter and use the v direction buttons to select the desired item Press the direction button to return When select the Title or Chapter use number buttons to input desired title or chapter Some DVD discs do not support the search function 207 Playback Functions Previous and Next Press the PREV 1 button once to return to the currently playing Chapter or Track Press the PREV button twice repeatedly and playback will start from the previous Chapter or Track Press the NEXT button on the remote control and playback of the disc will start from the next Chapter or Track Repeat To repeat a Title Chapter or Track press the REP button on the remote control Continually pressing the REP button will display a menu as follows Repeat Chapter Title All You can temporarily select a section of a DVD that you would like to play repeatedly You do this by marking the start and the end of the section using the A B button During playbac
31. us has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Copyright Protection Unauthorized copying broadcasting public performance and lending of disks are prohibited This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited 4 FCC Notice Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no gu
Download Pdf Manuals
Related Search